Reloading Resources - Link Guide

Started by Marshal Halloway, November 08, 2005, 11:10:07 PM

Previous topic - Next topic

Marshal Halloway


As individual procedures and practices are beyond our control, CAScity.com disclaims any and all liability for any damages which may result from failure to follow prudent handloading practices, or from using any data posted here by individual members, which does not comply with published industry standards.

Reloading Data from Ammunition Manufacturers:

Accurate Powder Reloading Data
Alliant Powder Interactive Reloaders Guide
Hodgdon Powder Company Reloading Data

If you have other reliable sources on the Internet, please add it to the list.

Editor & Webmaster of CAScity.com
Director - Digital Video Division - Outdoor Sportsman Group (OSG).
Digital Video Production & Post Production OSG
Owner of Down Range Media GP

BlackHawkPaul

Thanks Marshal! I found the new Trail Boss loads under IMR in a special new section. I finally got a can. Now I have to find the T.B. weight equivalents by volume for some of my Lee powder scoopers.

Bottom Dealin Mike


Four-Eyed Buck

Paul, Lee should have the VMD for Trail Boss listed on their site by now. I did have it, but it's been misplaced. I have an Autodisc on my PRO 1000, figured the VMD setting as .66 for a 3.0g load, but it seemed to drop short of that. Went to the .71 and got 3.1g with it and it seems to hold very close tolerance.
If they don't have it listed, give them a call and they'll give it to you...........Buck 8) ;)
I might be slow, but I'm mostly accurate.....

Neversleeps, 13790

Hi Pards,
This is a pay site but well worth it:
www.loaddata.com
It has a CAS section.
Regards,
Neversleeps

Piedra Kidd

Life should not be a journey to the grave with the intent of arriving
safely in a pretty and well preserved body, but rather to skid in
broadside, thoroughly used up, totally worn out and loudly proclaiming
"WOW!"  What a ride!

Dakota Dan from OZ

My Pa once said "Son never take a knife to Gun Fight"  He told the truth.
SASS# 28875
SASS State Governor
SASA  Aust #2715
SASA State Discipline Chairman
RATS 239
PWDFR 146
GSC 001

Griff

For those of you that cast your own:  Check out The Cast Bullet Association and the Los Angeles Silhouette Club page on casting data and formulas.  Lots of links and additional data on molds, techniques, etc.

EDIT:  Well, if it didn't work before, :o it does now... 8) thanks to whoever fixed it!  ;D
Griff
SASS/CMSA #93 Endowment
LSFSC Life
NRA Patron

Skullyville Tom

BrianEnos.com has a tremendous amount of information available, their reloading forum is a great resource for reloading information in general and also specific information about Dillon reloading equipment.

For those not familiar with Brian Enos, he is a previous Practical Pistol Champion.

http://www.brianenos.com/forums/index.php?

Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt

Marauder

Griff's link to the Cast Bullet Association is a off. 

It should be:
http://www.castbulletassoc.org/links.shtml

Thanks for the links!

BloodyBill

I got the new Trail Boss  /  Lil Dandy rotor chart directly from RCBS.  Looks like this:

Rotor #4 = 1.5 gr.   #5 = 1.7 gr.   #6 = 1.8 gr.   #7 = 1.9 gr.   #8 = 2.1 gr.   #9 = 2.3 gr. 
         #10 = 2.5 gr.   #11 = 2.8 gr.   #12 = 3.1 gr.   #13 = 3.4 gr.   #14 = 3.7 gr.   #15 = 4.0 gr.   
         #16 = 4.3 gr.   #17 = 4.6 gr.   #18 = 4.9 gr.   #19 = 5.2 gr.   #20 = 5.5 gr.   #21 = 5.8 gr.
         #22 = 6.0 gr.   #23 = 6.4 gr.   # 24 = 6.7 gr.   #25 = 7.1 gr.   #26 = 7.5 gr. 
     
I love the smell of gunpowder in the morning!

Reverend Sayer Prayers

Keep the Sun at Your Back and Your Powder Dry,

Reverend Sayer Prayers

LoneRider

VMD for Trail Boss is.....  .2172    Multiply this number by how many grains you want and it will give you a number close to the Lee disc you need to use.
Example       3gr x .2172 =65
                  3.5 x .2172=76
Happy Trails

Ranger Lee Hitch

Piedra Kidd
The link to "stevenspages.com" shows CCI 550 (magnum) primers for .38 special loads. Is this a misprint or an acceptable practice?
"Damn, That's a lot of injuns" George A. Custer

Camille Eonich

"Extremism is so easy. You've got your position, and that's it. It doesn't take much thought. And when you go far enough to the right you meet the same idiots coming around from the left."
― Clint Eastwood

ShenandoahRed

For those who can not run their own reloading operation, there is a reloading service
run by SASS members for SASS members: Gunfire Arms & Ammunition. Box of 50
.38 Special for $11.00. These pards also do volume orders of 500. Low prices for
.45 LC reloads. They give priority to reload orders from SASS shooters. Send your
used brass to them and the cost is even less.  Best price for a commerical reload
service, that I have found. Check them out:  http://gunfirearms.com/

Shenandoah Red
SASS # 90445

Bugscuffle

Here is a handy site that settles a lot of arguments with my wife. I just have to show her how much I'm saving by buying all that reloading stuff.

http://www.10xshooters.com/calculators/Handgun_Reloading_Cost_Calculator.htm
I will no longer respond to the rants of the small minded that want to sling mud rather than discuss in an adult manner.

Jefro

Here's one from Hodgdon that's no longer on thier web site. Cowboy Action Data starts on page 30. Good Luck :)
Hodgdon Basic Reloading Manual PDF


Jefro :D Realx-Enjoy
sass # 69420....JEDI GF #104.....NC Soot Lord....CFDA#1362
44-40 takes a back seat to no other caliber

joec

I came across an Access Database program that is undateable allowing you to save your favorite loads as well as those pre loaded. The guy that created used a lot of powder makers information in the initial data as well. It also prints targets for you and manuals as well as a gun database to keep track of your weapons. I got it from https://sourceforge.net/projects/reloadersrfrnce/files/Reloaders_%20Reference/9.3x74r%20-%20Final/ Now the main program is named RRv93x74r.exe (82.4 MB), from there you will need a download and install of the targets and several for the manuals. It also has some built in calculators for reloading costs, trajectory etc.

Joe
NCOWS 3384

SMF spam blocked by CleanTalk
© 1995 - 2024 CAScity.com