Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
The Powder Room - CAS reloading / Re: starline 44-40
« Last post by Buck Stinson on Today at 10:40:14 AM »
Called Starline yesterday and it was all gone within 3 hours.  Again, no backorder at this time.
2
The Leather Shop / Re: New Sunday Scabbard
« Last post by Marshal Will Wingam on Yesterday at 09:49:21 AM »
If you can get those photos reduced in size, they would be most welcome here. That holster is outstanding.

If you need to resize your photos in Windows, Faststone Photo Resizer works great.

In Linux, gThumb is the easiest I've found. It's installed from the Software Manager. I make photos 640 x 480 pixels and never have a problem with them.

On a Mac, I'm not sure, having had little experience with them.
3
The Leather Shop / New Sunday Scabbard
« Last post by StrawHat on Yesterday at 09:08:02 AM »
Here is a new scabbard for a 4”, N frame with fixed sights.

Kevin

Hmmm, not able to post images, too big?  Oh well…
4
1911 & Wild Bunch Shooting / Re: A Krag for Wild Bunch ?
« Last post by Major 2 on Yesterday at 09:06:54 AM »
 spoken for, thanks for looking

Won't be used in WB
5
1911 & Wild Bunch Shooting / Re: A Krag for Wild Bunch ?
« Last post by August on Yesterday at 08:22:21 AM »
Since it has been "sporterized," it is not legal. 

BAM – Bolt Action Military Rifle Side Match
The rifle must be an original caliber bolt-action rifle issued by any country to its military forces through the end of WWII. It must be as issued with original iron battle sights and NO external modifications. Internal modifications are allowed. Faithful reproductions are allowed. Unless an exception is listed for a specific match, All BAM bullets must be of pure lead or lead alloy. Gas checks are allowed, but not jacketed bullets.
7
The Powder Room - CAS reloading / Re: starline 44-40
« Last post by Jeff Michel on March 26, 2024, 06:46:18 AM »
Shipped yesterday.
8
NCOWS / Re: 2024 convention
« Last post by Yuma Kid on March 25, 2024, 03:53:28 PM »
I should also take this opportunity to thank John "Bear Tooth Billy" Hoker for putting on the convention without the help of a local posse. I know he had a lot of help and thanks to everyone who was able to. This convention would not have happened without John and he deserves all the credit!
Thanks! :) :)
9
Gunsmithing / Re: Measuring mainspring strength
« Last post by Navy Six on March 25, 2024, 01:31:18 PM »
Well, just to satisfy myself that I wouldn't be wasting my time, this morning I did a brief preliminary test. A pair of Uberti mainsprings that came out of Cattleman(circa 1998 & 2000 and are definitely heavier than current production) were installed in my Uberti 51 Navy squarebacks. These two cap suck at the rate of 2/3 every 30 rounds or so despite everything done to them. After 60 total rounds I didn't have a single issue. No changes from usual other than the mainsprings. So I will hunt down more mainsprings of a similar weight as I intend to continue testing these two guns as well as a pair of 61 Navies and 60 Armies. I want to know about what weight mainspring is required to make these things work.
10
NCOWS / Re: 2024 convention
« Last post by Major 2 on March 25, 2024, 01:01:48 PM »
Major 2,
I have a couple of folks who regularly help me out with photos for the Shootist' As they come in, I will post some of the best ones here on CasCity.
Yuma

Thank you looking forward to them.
Pages: [1] 2 3 4 5 6 ... 10
SMF spam blocked by CleanTalk
© 1995 - 2023 CAScity.com