Author Topic: New Model Vaquero loading gate  (Read 1424 times)

Offline Navy Six

  • Top Active Citizen
  • *
  • Posts: 459
  • SASS #: 26385
  • NCOWS #: 1410
  • Liked:
  • Likes Given: 66
New Model Vaquero loading gate
« on: November 22, 2020, 08:32:06 AM »
A couple of friends just bought a pair of brand new stainless New Model Vaquero for SASS use. All four guns exhibit the same problem: the loading gates don't sit flush in the frame, whether the gates are open or closed. The gates projected far enough that they sometimes obstructed cylinder rotation with loaded rounds, i.e. the rim of a loaded round would occasionally catch on the gate or make cocking effort greater than normal. Is there a common problem here that I can address to help out my friends? 
Only Blackpowder Is Interesting 
"I'm the richest man in the world. I have a good wife, a good dog and a good sixgun." Charles A "Skeeter" Skelton

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: New Model Vaquero loading gate
« Reply #1 on: November 22, 2020, 10:05:59 AM »

 :)  Six   ;)

There are a couple of fix's for the problem.  However, Ruger owes them "Warranty" on the problem.  I'd suggest contacting Ruger to return them for correction.  Working on them personally would probably void the factory warranty.

The guns are stainless so bluing and CCH is not a consideration.  Fix number one is to apply a small bevel to the edge of the loading gate so the cartridge can push past.  Fix number two is to remove the gate and surface the entire gate down to be flush with the Recoil Shield or even slightly sub-flush.

Hide and Watch

Offline Silver Creek Slim

  • Buckaroo
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 18434
  • NCOWS #: 2329
  • GAF #: 144
  • Liked:
  • Likes Given: 104
Re: New Model Vaquero loading gate
« Reply #2 on: November 22, 2020, 01:39:53 PM »
Contact Ruger.

Slim
NCOWS 2329, WartHog, SCORRS, SBSS, BHR, GAF, RBCS, Dirty RATS, BTBM, IPSAC, Cosie-in-training
I love the smell of Black Powder in the morning!

Advertising

  • Guest
Re: New Model Vaquero loading gate
« Reply #3 on: Today at 08:38:19 AM »

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15831
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 416
Re: New Model Vaquero loading gate
« Reply #3 on: November 22, 2020, 01:51:35 PM »
I echo ...Contact Ruger , it is claimed they have great customer service
they should pay shipping both way, ( they will issue a pick-up )

No doubt it is a quality control problem ....
when planets align...do the deal !

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com