CAS TOPICS > Gunsmithing
.44 Magnum Cylinder Throats
(1/1)
Niederlander:
Gentlemen, I just got a .44 Mag with .426 cylinder throats, and I'm getting some leading. I'd prefer .429 or .430. Any of the smiths on here do that work? Any recommendations? Thanks!
Dakota Ike:
On the castboolits forum there is a member , DougGuy, that can take your cylinder throats to the size you want. Although I have not had any work performed by him, he would be my first choice for any cylinder that work I needed. I don’t recall ever hearing anything negative about his work.
Coffinmaker:
:) D. Ike ;)
Well, your cylinder throats are way undersize. :( However, before you engage anyone to ream the throats, you first need to "slug" you bore. Very important to know the grove diameter of your barrel. Then you need to source bullets a thousandth larger then that diameter. Your Throats should then be the same diameter as the intended bullets.
Most of today's .44 barrels are .429. That is pretty much the industry standard. Calls for bullets of .430 and throats of .430. Slug the bore first to be certain.
People are Hazardous to Yer Health. Avoid 'em
PS: Fix'd it. I hate OTTO KEREKT
Advertising:
Trailrider:
Is this an Old Model Vaquero cylinder? We had that problem with the OMV's in .44-40 originally, but I wasn't aware of it in the .44 Mangle-em's. Are you intending to shoot jacketed bullets? In that case, you should have the throats reamed out to groove diameter of the barrel. With my .44-40 OMV's and the .425" throats, I have just been shoting .429-.430" hard cast bullets ONLY (BHN 12-17). I get great accuracy and virtually no leading. The way that works, is the bullet compress going through the throats, but the compressive strength of the alloy is such and the dwell time in the throats is such that the bullets re-expand in the forcing cone.
Niederlander:
It's actually a Smith & Wesson 629-3. (Definitely non-CAS.) It doesn't lead nearly as badly as a 629-1 I had with .432 throats, but I'm going to have it adjusted to .430. That way I'll be able to use the same bullets in my .44 Ruger, as well.
Navigation
[0] Message Index
Go to full version