Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
The Darksider's Den / Re: QUIET my Rosey Re . . . . .
« Last post by Abilene on Today at 05:40:04 PM »
Wellllll my dear netizens....

Since they are not old timey
You probably don't want to hear about

My 1.5" 12 guage project
In a bullpup Mossberg ....


How long will the project take?  Maybe it will be old timey when you finish?   :D

Yhs
Prof mumbles
2
Gunsmithing / Dovetail front sight on 66 carbine?
« Last post by nativeshootist on Today at 04:52:00 PM »
Has anyone tried dovetailing a 66 carbine recently? i saw one on i think was sasswire. I have a 45 colt carbine and looking at the barrel i don't see much on the barrel for one. was just curious. I took mine hunting recently and found out that the front sight was crooked due to sliding. barrel band screw was tight.
3
The Leather Shop / Re: Rifle Scabbards
« Last post by Trailrider on Today at 04:49:39 PM »
It's gonna depend somewhat on the length of the rifle that fits inside the scabbard, i.e., the balance point of the rifle and scabbard.  You also mentioned riveting the billets. I would recommend stitching them to the scabbard so there's no possibility of scratching the gun.
4
The Darksider's Den / Re: QUIET my Rosey Re . . . . .
« Last post by Professor Marvel on Today at 04:47:28 PM »
Wellllll my dear netizens....

Since they are not old timey
You probably don't want to hear about

My 1.5" 12 guage project
In a bullpup Mossberg ....


Yhs
Prof mumbles
5
CAS City Classifieds / WTB .44 Russian brass
« Last post by Roosterman on Today at 03:57:07 PM »
Looking for new or once fired. 50 to 200 pieces.
6
Tall Tales / Re: It's November, so stuff it.
« Last post by Russ T Chambers on Today at 03:46:36 PM »
Made it back form Oreegone in one piece (though a slightly larger piece)!  Didn’t get in until 1:00 AM and even with only a 15 min trip home, didn’t get to bed ‘til after 3:00.

After a late rising time, got the outdoor Christmas lights up! Then an early bedtime.


TODAY
TUE 11/30
CURRENT HIGH 57°F
HIGH 58°F 1% Precip. / 0.00 in
Mostly sunny. High 58F. Winds light and variable.

We’ve now gone from overcast and rain and a 15° temp change overnight back to clear skies with a 30° temp change from day to bight.

Think I like our weather better here. 

Hope everyone enjoyed their Thanksgiving.  Now we’ve just got to get Susan sorted out, packed up and ready for her trip to Wisconsin on the 9th.
7
1860 Henry / Re: 1860 Henry Original or Replica?
« Last post by Major 2 on Today at 02:54:01 PM »
It must be the showman in my blood, I look beyond the obvious and gaze at what could be  :-\

I'd wall hang it  :)  send it down to me and I put it in the Museum  ;D 
8
The Darksider's Den / Re: QUIET my Rosey Re . . . . .
« Last post by Gabriel Law on Today at 12:49:31 PM »
I've got two projects for this winter.  The first is my Uberti 1860 Henry Civil War Model.  It took a fall from the roof of my P/U truck at highway speed onto the gravel shoulder and now needs a new butt stock.  I'll find a nice piece of American walnut and whittle out something that is a little more user friendly than the factory stock...higher comb, a little longer LOP, maybe a shotgun butt, chequered wrist.
The second is work on a hammerless double 12 gauge, getting it ready for CAS.  It needs the springs filed to allow the gun to be cocked without leaning on the barrels, and the chambers slicked for easier feed and dump.  Any thoughts on those two operations from folks who have been there before me, would be much appreciated.
9
Tall Tales / Re: It's November, so stuff it.
« Last post by Delmonico on Today at 12:16:31 PM »
A New Hope? ;)


10
Tall Tales / Re: It's November, so stuff it.
« Last post by DeaconKC on Today at 11:02:00 AM »
Morning folks, 49 here right now, working on coffee. Supposed to hit 64 today and the plan is to hang metal signs in the garage today.
Major, shoot me your address!
Pages: [1] 2 3 4 5 6 ... 10
SMF spam blocked by CleanTalk

© 1995 - 2021 CAScity.com