EMF Pietta Dance. C'mon EMF

[Rube Burrows]

Last week I ordered a Pietta Dance from EMF. I saw they charge 45 bucks for shipping so I thought to myself

"okay, they must send two day shipping or whatever since it's a handgun, although its not considered firearm"

Nope. They charge 45 dollars shipping and they ship it the slowest UPS known to mankind.

Also took 4 days to process and 5 to actually ship. One of these days I guess I'll get the Dance revolver.

I am sure it will be nice and I wouldn't be all that worried about the slow shipping had I not paid 45.00 for shipping.

Rant over 

[Marshal Will Wingam]

Shipping might be the greatest but at least you have one coming. Looking forward to photos after you have it. And it's a good excuse to make a new holster!

[Coffinmaker]

  Well Dagity Nabbitz 

I really like the folks at EMF.  Been doing business with them for decades.  Literally decades.  But, and However:

I have always felt that EMF just absolutely STUCK IT TO US for shipping.  Not so bad shipping Cap Guns, but really really expensive for Suppository Shooters.

So I can really feel Rubes' pain.

[Advertising]

[Coffinmaker]

  Memory of a Gnat 

Will Wingam was posting as I was typing however I did forget to mention I DO have a really swell pair of Pietta Dance & Bros. Cap Gunz.  They are the "Old Silver" version with engraving.  Most of the 8 inch barrels fell off mine though 

[Rube Burrows]

Shipping might be the greatest but at least you have one coming. Looking forward to photos after you have it. And it's a good excuse to make a new holster!

Def. All pluses.

[Rube Burrows]

Well Dagity Nabbitz 

I really like the folks at EMF.  Been doing business with them for decades.  Literally decades.  But, and However:

I have always felt that EMF just absolutely STUCK IT TO US for shipping.  Not so bad shipping Cap Guns, but really really expensive for Suppository Shooters.

So I can really feel Rubes' pain.

I for sure feel that 45.00 for a single revolver shipping that is not at least two day shipping is excessive. I would hate to see what they charge for a cartridge revolver.

[Rube Burrows]

Memory of a Gnat 

Will Wingam was posting as I was typing however I did forget to mention I DO have a really swell pair of Pietta Dance & Bros. Cap Gunz.  They are the "Old Silver" version with engraving.  Most of the 8 inch barrels fell off mine though 

I have seen some of those. Pretty nice.

[Rube Burrows]

Came in today and it sure is a beauty.

[Marshal Will Wingam]

Congrats, Rube. Looks good. It'll be nice to hear how you like it. How does that large Pietta grip fit your hand? I've talked to a few who really like the way they feel.

[Rube Burrows]

Congrats, Rube. Looks good. It'll be nice to hear how you like it. How does that large Pietta grip fit your hand? I've talked to a few who really like the way they feel.

Well, out of the box I did not really notice a big difference in the grip. It does feel good in the hand but I didn't realize how different the grip is from the normal 1851 Colt Navy grip is.

I went and pulled one of my Pietta 51 Navies from the safe to compare it and yeah, its a good bit different. I don't have an 1860 but my feeling is that it's not quite an Army grip but def. bigger than a Navy grip.

My older Pietta 51 Navy is much more narrow in the middle of the grip.

Anyone have a Converted Dance? I have a few ideas bouncing around in my head for this one and not sure yet what I will do with this one.

[Rube Burrows]

Here is another side by side view of the grips.

One thing that I do like is the Pietta Dance don't have the gloss finish on the grip. More of a dull oiled finish that looks better to me.

[Marshal Will Wingam]

That new Pietta grip is on the 1851's, too. They seem to have changed that in 2015, I think.

As to a converted Dance, I'd say go for it. Here's an original one that was converted.

[Coffinmaker]

  Hey Guys 

Converting the Pietta Dance to suppositories is going to be somewhat problematic.  The Cylinder is shorter than a Colt Pattern gun resulting in the Barrel Breach being much longer.  And a "Stepped" cylinder from an 1860 won't fit the Water Table.

The Cylinder would actually need to be machined to be a "long Cylinder" type conversion and it would need to be for 44 Colt cartridge with heel base bullets.  Can be done but is fairly involved (expensive).  The Dance cylinder is not large enough for 45 Colt cartridges.

[Rube Burrows]

Hey Guys 

Converting the Pietta Dance to suppositories is going to be somewhat problematic.  The Cylinder is shorter than a Colt Pattern gun resulting in the Barrel Breach being much longer.  And a "Stepped" cylinder from an 1860 won't fit the Water Table.

The Cylinder would actually need to be machined to be a "long Cylinder" type conversion and it would need to be for 44 Colt cartridge with heel base bullets.  Can be done but is fairly involved (expensive).  The Dance cylinder is not large enough for 45 Colt cartridges.

Thanks for the info.

[Rube Burrows]

That new Pietta grip is on the 1851's, too. They seem to have changed that in 2015, I think.

As to a converted Dance, I'd say go for it. Here's an original one that was converted.

Do you have anymore info on this Dance? Is that one of the few with a recoil shield?

[Marshal Will Wingam]

Do you have anymore info on this Dance? Is that one of the few with a recoil shield?

That one doesn't have recoil shields. They just cut a loading groove in the side of the frame. I don't have any information other than a couple photos I found online. The serial number was one of the special character pistols with 1 diamond.

Kirst conversions will fit but the cylinder end of the barrel needs to be shortened a little bit to accommodate them. Here's what the Kirst site has to say. Evidently you have to take 120 thousandths off it. I don't see why one couldn't take 120 thousandths off the Kirst cylinder and leave your dance barrel alone. You'd need a lathe for that or be prepared to sand on it for a full 24 hours.

[Rube Burrows]

That one doesn't have recoil shields. They just cut a loading groove in the side of the frame. I don't have any information other than a couple photos I found online. The serial number was one of the special character pistols with 1 diamond.

Kirst conversions will fit but the cylinder end of the barrel needs to be shortened a little bit to accommodate them. Here's what the Kirst site has to say. Evidently you have to take 120 thousandths off it. I don't see why one couldn't take 120 thousandths off the Kirst cylinder and leave your dance barrel alone. You'd need a lathe for that or be prepared to sand on it for a full 24 hours.

I just guess that if you take it off the barrel then you would have to already have to shorten to 1.58" 45 Colt rounds. If you take it off the cylinder you'd have to possibly shorten them even more.

[45 Dragoon]

Pietta length cylinder should be fine for "correct" length cartridges. I'd shave the fc end to fit . Maybe even consider  45acp?

Mike

[Rube Burrows]

Pietta length cylinder should be fine for "correct" length cartridges. I'd shave the fc end to fit . Maybe even consider  45acp?

Mike

Thanks Mike.

[Marshal Will Wingam]

Pietta length cylinder should be fine for "correct" length cartridges. I'd shave the fc end to fit . Maybe even consider  45acp?

Mike

The Kirst 45 ACP conversions will also accept C45S and 45 Auto Rim cartridges. You might be able to resize .455 Webley cases to fit in them, too. If I were to convert one, that's the route I'd take and shorten the cylinder rather than the barrel. Any good gunsmith should be able to shorten a cylinder if you didn't want to tackle it yourself.