Author Topic: Takedown screw on Stevens crackshot  (Read 172 times)

Offline bear tooth billy

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 842
  • NCOWS Senator
  • Liked:
  • Likes Given: 9
Takedown screw on Stevens crackshot
« on: May 02, 2021, 08:39:47 AM »
I got a Stevens crackshot 26 in .22 cal. The takedown screw was gone
and somebody replaced it with a 1/4-20 screw which screwed up the
threads. I ordered some parts from Jack First, including the correct
take down screw, but it is a weird thread size. about .189" and 24
tpi. I am going to try to fit in an adapter, but don't know about a tap


                     Thanks  BTB
Born 110 years too late

Offline Kent Shootwell

  • Top Active Citizen
  • *
  • Posts: 653
  • Got whiskey, will stumble.
  • Liked:
  • Likes Given: 6
Re: Takedown screw on Stevens crackshot
« Reply #1 on: May 02, 2021, 10:45:05 AM »
That’s a #10x24 tpi that is a standard screw size.
Little powder much lead shoots far kills dead.
Member, whiskey livers

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com