Coffinmaker and Pettieffoger, thanks for the tips as always. I tried to get the screws loose, but one would not move. I have done a lot of work on my own guns for years and did not want to mess up the screw, but took a chance and unscrewed the lever screw to where it was out on the right side, and with a brass punch pushed it out the left side. I was able to take the right side plate off, and then the left side, turned the lever springs out at both sides like you said and they unscrewed easy. Cleaned things up and reassembled, only did not tighten like the gorillia at Uberti, just snug, functions perfect, and will check when cleaning the rifle.
Thanks again for your help.
Reno