Presently 66° , Cloudy with a high of 76 °F and a 55% chance of precipitation.
"SWWBO" made a spiral ham for Easter repast, So I am enjoying my coffee with leftover ham & a biscuit this morning.
I have a stash of once fired 30 06 Milsurp brass I am going to de-prime and wet tumble.
I've actually never ventured into this, not sure if it's folly

Lee Universal de-prime dye did not have the oomph to use my press to overcome the crimp.
So, I resorted to a hand pin punch and a homemade shell holder Dealie.
This setup works reasonably well. The Lee shell holder is for a handheld primer I had no other need for.
I JB welded
it to the birch ply base for both a pocket for a spent primer to fall and to stabilize the contraption.
The Brass is head stamped L C and either 72 or 77, I'm of the opinion Lack City Arsenal and the years of manufacture.
I'm not sure as to what they were fired from, I'm assuming a Garand because they came with EM Block clips. Thay also dial indicator to the correct OAL so trimming may not be necessary ?
I ordered a pocket ream for the crimp removal, but note a countersink and cordless drill used on Utube

Anyway, new venture for me, I'm open to comments
