Author Topic: Spencer found in a cave  (Read 1389 times)

Offline Jack Wagon

  • Top Active Citizen
  • *
  • Posts: 268
  • the High Sierra
  • Liked:
  • Likes Given: 0
Spencer found in a cave
« on: October 12, 2021, 10:49:55 PM »
Passing the newsstand I spotted a Spencer on the cover of the 2021 Fall edition of The Black Powder Cartridge News. A good article about a relic Spencer found in a cave in Arizona and restored to shooting condition. Nice to see a Spencer on the front page,  Jw
Jack Wagon
Member NRA
Member #358 SSS

Offline matt45

  • Top Active Citizen
  • *
  • Posts: 557
  • Liked:
  • Likes Given: 11
Re: Spencer found in a cave
« Reply #1 on: October 14, 2021, 09:03:34 AM »
might have to get that one :D

Offline Jack Wagon

  • Top Active Citizen
  • *
  • Posts: 268
  • the High Sierra
  • Liked:
  • Likes Given: 0
Re: Spencer found in a cave
« Reply #2 on: October 14, 2021, 09:56:29 AM »
It is a good article. The M1865 Spencer carbine was apparently field decommissioned to prevent it's use. Quite a restoration project including a new Romano barrel. A 56-50 load development section and a hunting trip with the restored Spencer.  Jw
Jack Wagon
Member NRA
Member #358 SSS

Advertising

  • Guest
Re: Spencer found in a cave
« Reply #3 on: Today at 06:14:25 AM »

Offline El Supremo

  • kevintinny@hotmail.com
  • Top Active Citizen
  • *
  • Posts: 619
  • Liked:
  • Likes Given: 7
Re: Spencer found in a cave
« Reply #3 on: October 15, 2021, 08:14:41 AM »
Hello:

I don't subscribe any more. 
Maybe someone with access could post the new Romano barrel's bore spec's, number L&G, and twist.  Also what load worked well, please.
Thanks and smiles.
Edited for typo.
El Supremo/Kevin Tinny
Pay attention to that soft voice in your head.

Offline mgmradio

  • Very Active Citizen
  • *
  • Posts: 72
  • Liked:
  • Likes Given: 1
Re: Spencer found in a cave
« Reply #4 on: October 15, 2021, 10:05:44 AM »
Hi Kevin,
    I was with Bill Mapoles when he was shooting the targets for the article. I’ll see if he remembers the specs. He found it quite a few years ago and him and his son restored it many years ago.
     Mike

Offline El Supremo

  • kevintinny@hotmail.com
  • Top Active Citizen
  • *
  • Posts: 619
  • Liked:
  • Likes Given: 7
Re: Spencer found in a cave
« Reply #5 on: October 15, 2021, 11:26:47 AM »
Thanks, MGMRADIO/Mike:
I will also try for a copy via a member here.
Since barrel done years ago, twist will be interesting.
It could match an original or be Larry's preferred 36" or 32".
Smiles,
Kevin
Pay attention to that soft voice in your head.

Offline mgmradio

  • Very Active Citizen
  • *
  • Posts: 72
  • Liked:
  • Likes Given: 1
Re: Spencer found in a cave
« Reply #6 on: October 18, 2021, 10:48:14 PM »
Kevin,
 I spoke with Bill. He believes that the barrel is a Douglas barrel that was turned down and fitted by Romero. 6 grove rifling and not sure of the twist. Grove diameter around 0.513”.

Offline El Supremo

  • kevintinny@hotmail.com
  • Top Active Citizen
  • *
  • Posts: 619
  • Liked:
  • Likes Given: 7
Re: Spencer found in a cave
« Reply #7 on: October 19, 2021, 04:53:27 AM »
Many thanks, MGMRADIO:

The Douglas barrel recollection fits Larry's remarks to me in 2004-2005. 
He shared that at the start of his Spencer's he used Douglas 4140 alloy, 50  caliber blanks with 36" twists.  He wanted a faster 32" twist, but  could not get Douglas to cut it in 50 caliber. 
He bought used Pratt and Whitney hydraulic guide bar 1/2B-50 machinery to make his own using either 41L40 or 12L14 alloys. 
This transition happened around 1999-2000.

Overall, Larry's Spencer twists were 36"and 32" and there are two documented Hoyt blanks with 56" twist that were specifically requested by shooters.  There is a third, original carbine with a 56" Hoyt twist
replacement barrel that the owner posted was Romano's work.
Larry told me he did not do that one, that it was "never in his shop, and he knew who did it".

Smiles,
Kevin Tinny/El Supremo
Edited 30 Oct 21 to correct twist of 38" to 36". Kevin
Pay attention to that soft voice in your head.

Offline El Supremo

  • kevintinny@hotmail.com
  • Top Active Citizen
  • *
  • Posts: 619
  • Liked:
  • Likes Given: 7
Re: Spencer found in a cave
« Reply #8 on: November 02, 2021, 08:18:34 AM »
Hello:

I read the nice article that was shown to me by a friend that is an experienced BPCR shooter.
Especially helpful was the hunting portion that included the effectiveness of the 56-50.

Interesting that the article includes a photo of a c-fire round with Rapine 350T bullet. 
That bullet has a larger lube groove than the Lyman 515XXX with smaller lube capacity.
The test target was shot with the Lyman bullet.  The author noted that with the Lyman bullet, accuracy was good for the first 5/6 shots and then required bore wiping to eliminate shots that enlarged the group about 50%.

The barrel was a 30" Romano.

Just to clarify, please:
The increased (accuracy reducing) fouling in the 30" barrel is probably from the reduced lube capacity of the Lyman bullet.  Using alternative 56-50 bullets, such as the Romano, Rapine 350T and some by Accurate Bullet Molds that all have a single, larger capacity lube groove has presented no reduced accuracy issues from fouling in any of my rifles. 

Smiles.
El Supremo/Kevin Tinny
Pay attention to that soft voice in your head.

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com