Author Topic: A.Uberti "Military" Reenactors Henry...  (Read 2847 times)

Offline mtmarfield

  • Top Active Citizen
  • *
  • Posts: 545
  • Liked:
  • Likes Given: 1637
A.Uberti "Military" Reenactors Henry...
« on: May 09, 2019, 04:01:40 PM »
      Greetings!

   "A few years ago"( 90s? ), Navy Arms announced a new Henry replica that was reenforced for heavy
use by reenactors; my understanding is that the frame was beefed up somehow , to better take
the abuses of constant use, but my memory is fuzzy, and I'm uncertain of the specifics.
   My question to those of you who have access to the esoterica of Italian Replica Arms is, what
exactly was done to make these more robust? Furthermore, has this practice been continued,
and / or been implemented to all other Brass-Framed, Italian made Henry replicas?

            Thanks Mucho!

                       M.T.Marfield
                         5-09-19

Offline Tuolumne Lawman

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2798
  • Grass Valley, CA in the Sierra Nevada Mountains
  • Liked:
  • Likes Given: 46
Re: A.Uberti "Military" Reenactors Henry...
« Reply #1 on: May 09, 2019, 04:25:27 PM »
They had two steel rods about 1/8" diameter from butt plate to brass frame (through the stock), a cleaning rod trap door, and sling swivels.  The rods show as silver dots on the brass butt plate.
TUOLUMNE LAWMAN
CO. F, 12th Illinois Cavalry  SASS # 6127 Life * Spencer Shooting Society #43 * Motherlode Shootist Society #1 * River City Regulators

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: A.Uberti "Military" Reenactors Henry...
« Reply #2 on: May 10, 2019, 10:01:37 AM »

Hey!!  Lawman!!

When were these "Reenactors" guns made??  I have personally NEVER seen an 1860 Henry with rods thru the stock.  ALL the Henry rifles I have worked on had two shiny silver dots showing in the Butt Plate.  The little dots don't go anywhere.  Just dots.  Uberti production Henry rifles have always had a Trap Door and a space for a cleaning rod.  NAVY contract guns did too. 

Advertising

  • Guest
Re: A.Uberti "Military" Reenactors Henry...
« Reply #3 on: Today at 04:36:55 AM »

Offline Tuolumne Lawman

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2798
  • Grass Valley, CA in the Sierra Nevada Mountains
  • Liked:
  • Likes Given: 46
Re: A.Uberti "Military" Reenactors Henry...
« Reply #3 on: May 10, 2019, 10:59:29 AM »
Many of the Uberti guns without sling swivels do not have trap doors anymore.  My .45 Colt non-military did not have trap door or the silver dots.

Also, I tried to remove the butt plate of one with the silver dots, and it had the rods.
TUOLUMNE LAWMAN
CO. F, 12th Illinois Cavalry  SASS # 6127 Life * Spencer Shooting Society #43 * Motherlode Shootist Society #1 * River City Regulators

Offline Blair

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 2484
  • Liked:
  • Likes Given: 0
Re: A.Uberti "Military" Reenactors Henry...
« Reply #4 on: May 10, 2019, 12:57:35 PM »
I cannot say that I have ever seen these "silver dots" either. Except for the trap door hinge pin.
But then again I have not tried to remove every Henry butt plate I have inspected.
Where are these "silver dots" located, and how does that make the action stronger?
My best,
 Blair 
A Time for Prayer.
"In times of war and not before,
God and the soldier we adore.
But in times of peace and all things right,
God is forgotten and the soldier slighted"
by Rudyard Kipling.
Blair Taylor
Life-C 21

Offline Tuolumne Lawman

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2798
  • Grass Valley, CA in the Sierra Nevada Mountains
  • Liked:
  • Likes Given: 46
Re: A.Uberti "Military" Reenactors Henry...
« Reply #5 on: May 10, 2019, 01:05:02 PM »
Look at the picture of the butt in this thread. the silver is the end of the steel rods through the stock.

https://www.n-ssa.net/vbforum/showthread.php/9983-Navy-Arms-1860-Henry-44-40-FS

TUOLUMNE LAWMAN
CO. F, 12th Illinois Cavalry  SASS # 6127 Life * Spencer Shooting Society #43 * Motherlode Shootist Society #1 * River City Regulators

Offline Coal Creek Griff

  • Top Active Citizen
  • *
  • Posts: 2078
  • Liked:
  • Likes Given: 634
Re: A.Uberti "Military" Reenactors Henry...
« Reply #6 on: May 10, 2019, 03:19:21 PM »
Here are two photos of the butt plate from my Henry. Are we looking at the same silver spots? Mine are clearly the hinge for the trapdoor.

CC Griff
Manager, WT Ranch--Coal Creek Division

BOLD #921
BOSS #196
1860 Henry Rifle Shooter #173
SSS #573

Offline Tuolumne Lawman

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2798
  • Grass Valley, CA in the Sierra Nevada Mountains
  • Liked:
  • Likes Given: 46
Re: A.Uberti "Military" Reenactors Henry...
« Reply #7 on: May 10, 2019, 04:43:17 PM »
cool, thanks
TUOLUMNE LAWMAN
CO. F, 12th Illinois Cavalry  SASS # 6127 Life * Spencer Shooting Society #43 * Motherlode Shootist Society #1 * River City Regulators

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15832
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: A.Uberti "Military" Reenactors Henry...
« Reply #8 on: May 10, 2019, 05:09:14 PM »
They had two steel rods about 1/8" diameter from butt plate to brass frame (through the stock), a cleaning rod trap door, and sling swivels.  The rods show as silver dots on the brass butt plate.

CCG is correct
 ???    the pins you mention is the hinge pin for the cleaning rod door ....


What Uberti did in the Early nineties was beef up & lengthen the carrier & frame....the butt had no steel reinforced pins 
when planets align...do the deal !

Offline Speedballalice

  • Active citizen
  • *
  • Posts: 45
  • Liked:
  • Likes Given: 0
Re: A.Uberti "Military" Reenactors Henry...
« Reply #9 on: March 03, 2020, 09:56:42 PM »
I know this is an older thread but I think I may own one of the guns in question.  I dont know about the supposed beefing up of these but just assumed they were the beginning of the longer framed guns. Mine is a Navy Arms gun made in '92 I believe. It is marked "N.S.S.A-A11 THROUGH 500"on the tang. I'm sure the N.S.S.A is for the North South skirmish association. More info that could be provided on this gun would be appreciated as I havent found much on the net. I've had it close to 20 years.

I think I had the buttplate off years ago and dont remember rods in the stock. I stripped the the stock of its Italian finish and restaiined it so I'm sure I would have noticed. I can always look again though. As stated the pins in the buttplate are for the trapdoor hinge on mine also.

Very similar to this gun.
https://www.cowanauctions.com/lot/uberti-reproduction-1860-henry-rifle-3266946

Offline mtmarfield

  • Top Active Citizen
  • *
  • Posts: 545
  • Liked:
  • Likes Given: 1637
Re: A.Uberti "Military" Reenactors Henry...
« Reply #10 on: March 04, 2020, 10:18:39 PM »
      Greetings, Speedballalice!

   Thanks for your Post and Link! I hadn't heard of this run; let's see if this jars some memories.

          Be Well!

                   MTMarfield

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com