Cas City Forum Hall & CAS-L
Special Interests - Groups & Societies => The Barracks => Topic started by: Major 2 on May 25, 2023, 07:51:41 AM
-
Gents, I been trying to track down some information and so far it has eluded me.
This a Springfield made M 1903 ( not an 03a3)
I know the receiver number puts it made in 1938-39, the Barrel stamp is 1942.
I know the gun went through Augusta Arsenal for a rebuild AAq mark the lower case q being the inspector.
The Scant stock has the P
What I have not found out is the AOG what is AOG ?
-
Almost looks like a unit marking of some kind, but I wouldn't think they'd put it there.
-
Looks like one of the inspection marks for Ogden Arsenal.
Scouts Out!
-
I'm of the opinion that it may be an inspector. @ Anniston Ordnance Depot
I found this one AOE on a Remington 03. E would be the inspector :-\
I don't find AOG or AOE on this list of inspectors.
http://www.proofhouse.com/cm/us_inspector.htm
I've seen several AAa AAq and know that to be Augusta Arsenal (a) inspector.
I believe I see AA ghosted and over stamped with AOE here. Note: the lower case a is actually lower case Q
I was typing this when Robert replied
-
OG = Ogden Arsenal, that's a new wrinkle ..I'll direct a look in that direction, thanks
-
I think Ogden Arsenal = OG is a dead end
I see boxed [OG] and boxed [O.G.E.K] for Elmer Keith and “ogek” (not enclosed) signified inspector Ed Klouser.
but no AOG :-\
I have found Augusta Arsenal—“AA”—Typically followed with a letter suffix (presumed to be for the inspector supervising overhauls, in my case a). actually that is lower case Q = q
Later a number suffix (typically four digits) was sometimes added. These markings may be found stamped on either the left or right side of the stock.
interesting, though numbers but not letters, in my case AOG ... the search continues :) it's fun !
A story is attached to this gun, It was in a number range, sent to Ft. Ogelthorpe Ga. POW prison. ???
I own the gun, not necessarily the story.
-
Best case scenario, and front runner
AO= Anniston Ordnance Depot, October 14, 1941, the installation was officially designated the Anniston Ordnance Depot, G might be the inspector when the gun was stored.
In accordance with War Department General Order No. 11. In August 1962, the name was changed to Anniston Army Depot. = ANAD
Seems to fit
Original World War II WW2 Anniston Ordnance Depot Patch
-
That 'splains it!
-
I was on the Milsurp Board, that was the suggestion posted there :-\
It is highly probable this is the explanation.
Refurbish at Augusta Armory and sent to Anniston Ordnance Depot.
-
On October 14, 1941, the installation was officially designated the Anniston Ordnance Depot, in accordance with War Department General Order No. 11. In August 1962, the name was changed to Anniston Army Depot.
In the beginning, ammunition, and weapons storage and shipment was the depot’s primary mission. The overhaul and repair of combat vehicles was added, which has continued to expand throughout the ensuing decades.
In accordance with War Department General Order No. 11. In August 1962, the name was changed to Anniston Army Depot. = ANAD
Today, Anniston Army Depot, is the combat vehicle center of the free world.
-
I have been corrected... the AAa is in fact AAq as in lower case Q
I have learned the Scant stock with the (S) stamp in the safety cut out) would be an earlier manufactured one and would date to 1942.
It was restocked and refurbished at Augusta Armory in 1942 and sent to Anniston Ordnance Depot.
The Milsurp board has come through with the info I seek. ;D