When it comes to wet tumbling brass cases for reloading, there are a few key factors to consider in order to achieve the best results. One important factor is the recipe, or the specific combination of cleaning agents and media that you use. If you're looking for a fast and effective wet tumbling
30 minutes recipe, here are a few options to consider:
Simple Soap and Water: For a quick and easy wet tumbling recipe, mix a small amount of dish soap with warm water and add your brass cases. Tumble for 20-30 minutes, then rinse and dry the cases. This method is effective for removing dirt and grime, but may not remove tougher fouling.
Corn Cob and Walnut Media: Corn cob and walnut media are popular choices for wet tumbling brass cases, as they are gentle on the cases and can effectively remove fouling. Mix the media with a tumbling lubricant and add your brass cases. Tumble for 20-30 minutes, then rinse and dry the cases.
Stainless Steel Pins and Cleaning Solution: Another option for wet tumbling brass cases is to use stainless steel pins and a specialized brass cleaning solution. The pins will agitate the cases and help to loosen fouling, while the cleaning solution will help to dissolve and remove contaminants. Tumble for 20-30 minutes, then rinse and dry the cases.
Remember to always follow the manufacturer's instructions when using any cleaning agents or media, and be sure to properly store and label your wet tumbling recipes to ensure safe and consistent results.