Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
The Winchester Model 1876 / Re: Loading Data for the 45-60 WCF
« Last post by King Medallion on Today at 03:09:53 PM »
Ordered the FCD, have to buy them off ebay now. Have to send Lee a resized casing and bullet. They will not be returned. 8 week turnaround.
2
Tall Tales / Re: December coffee and grub
« Last post by Delmonico on Today at 12:58:32 PM »
They warned us about diseased wimmin, did we listen.  This one gave me her cold, or what ever.  Decided not to go to Dr. They will just point me to the ER so will see which way it goes. ::)
3
Gunsmithing / Re: Need to fix it, but I can't solder, and I can't weld
« Last post by kendudley on Today at 12:22:29 PM »
I swear my silver solder wire, comes with flux and Ace stores carry it.  about $15,
    I use MAP gas and that is enough heat to get a braze strong as a weld. 
  I used it for the broken hinge on a 41 Rem double derringer, and it's held for years.   Invisible too. 
      Ken
4
The Barracks / Re: P 37 Webley Holster
« Last post by Major 2 on Today at 11:53:10 AM »
Thank you, Sir....

I have received this same "you have a package " email several times, I've seen it from Fed-X and DHL  ::)

I also get " you have won " or you have gift cert. $$ at , Walmart, Target, Ace Hardware and Home Depot.
either SCAM or some kinda con .

And then there is the,"you may be eligible for a $2000 Senior Stimulus" or the 4th Senior Stimulus ...     ::)

5
The Barracks / Re: P 37 Webley Holster
« Last post by smoke on Today at 11:14:31 AM »
Not shipped yet.  Tomorrow or Monday. 
6
Tall Tales / Re: December coffee and grub
« Last post by litl rooster on Today at 11:00:29 AM »
Can’t believe it’s December all ready. Time flies.


Hope y’all are keeping it between the ditches.
7
Got the guard fitted and the iron ferrule fitted to the stag handle, and all fitted to the tang.  Now I need to drill & tap the pommel.
Balde is 8 1/2" long and the handle will be 4 3/4" long.
8
The Barracks / Re: P 37 Webley Holster
« Last post by Major 2 on Today at 10:33:21 AM »
If you are sending the uniform, please let me know when I might expect it.

I have an email from, allegedly  Fed-X saying they have a package and I need to call for delivery.  ???
I don't have any packages due
I believe it is spam, as it not the first time.
9
The Winchester Model 1876 / Re: Loading Data for the 45-60 WCF
« Last post by King Medallion on Today at 08:49:45 AM »
OK, resized them all in the 45/60 sizing die, the belled them. I can definitely see the difference. I actually put 45/70 seat die on the turret, screwed it all the way down and it's perfect for the MBC 300 gr Coated bullet. Then ran the shell into the 45/60 seat die to be crimped. Still tight, but no marks like before. There is no contact in the 45/70 seating die at all. Trying to order a FCD from Lee also.
10
Tall Tales / December coffee and grub
« Last post by Silver Creek Slim on Today at 07:39:37 AM »
Morning y'all.
Coffee and tea are hot.

'Tis 8 and cloudy. High of 32 and partly cloudy.

Slim
Pages: [1] 2 3 4 5 6 ... 10
SMF spam blocked by CleanTalk

© 1995 - 2022 CAScity.com