Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => Cas City Historical Society => Topic started by: Coal Creek Griff on August 13, 2022, 04:03:34 PM

Title: Burnside and Maynard in Action
Post by: Coal Creek Griff on August 13, 2022, 04:03:34 PM
There isn't really a good category for this, so I'll post it here. I don't believe that I've ever seen anyone actually shooting a Burnside or a Maynard before.
https://youtu.be/VVEAclBX3W0  (https://youtu.be/VVEAclBX3W0)
Title: Re: Burnside and Maynard in Action
Post by: 38OVI on August 13, 2022, 10:03:23 PM
Have a Burnside I used in NSSA Carbine matches for many years.  Have all of the assorted cartridges that were tried and used for many years.
Plastic/fiberglass, aluminum, and finally decent brass cartridges.  About a year ago, a friend had two Burnside brass cartridges and a brass Maynard cartridge that he gave me, that he got in some sort of trade. One of our guys shoots the Maynard, so I gave it to him.  I believe mine is a 5th Model, 25515.
Title: Re: Burnside and Maynard in Action
Post by: Trailrider on August 25, 2022, 05:17:58 PM
I have a couple of comments about the Burnside: I have shot several originals using the brass cartridges sold by Dixie Gun Works some years ago. I had zero leakage at the breach, and when the breach was opened smartly, not only did the cartridge case pop partially up, so you could grasp it easily and remove, but as the action is opened, a projection on the rear of the receive hits the wings on the fired cap, kicking it off the cone!  Mine was also a Fifth Model or Fourth Model, Second Type, depending on collector's terminology, (with the guide screw in the right side of the receiver that guides the block. IMHO, I would have preferred the Burnside in CW combat, to the Sharps, as the Sharps' cone would foul eventually, losing its effectiveness in sealing the breach.  Of course, I would prefer the Spencer to either due to its self-contained cartridge.