Author Topic: What shellholder for Taylor Starline 56-50  (Read 2459 times)

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1192
  • Liked:
  • Likes Given: 47
What shellholder for Taylor Starline 56-50
« on: October 15, 2005, 01:49:48 PM »
Just picked up all my equipment for the Taylor Spencer loading.  Waited until I got home to test out the parts.  The Lyman X-17 shellholder that the shop was told would work is too small for the Starline 56/50 brass rim.

So, what is the correct shellholder?   I use a Lee press but the Lyman will fit.  But,  What number do I need to order?  What number do you use?


Thanks for the info.

Black River Smith
Black River Smith

Offline Hell-Er High Water

  • Top Active Citizen
  • *
  • Posts: 429
    • Hell-Er High Water
  • Liked:
  • Likes Given: 0
Re: What shellholder for Taylor Starline 56-50
« Reply #1 on: October 15, 2005, 02:56:29 PM »
Black River Smith,

The Lyman X-17 shellholder is for the 45-70 family of cases.  The Lyman X-22 shellholder is the standard 50-70 shellholder and is what is needed for the 56-50.  Any RCBS, Lee or other 50-70 shellholder should also work, if these others make 50-70 shellholders.  The Lyman is the one that I use.

Hell-Er High Water

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1192
  • Liked:
  • Likes Given: 47
Re: What shellholder for Taylor Starline 56-50
« Reply #2 on: October 15, 2005, 05:49:43 PM »
I thank you very much High Water


Black River Smith
Black River Smith

Advertising

  • Guest
Re: What shellholder for Taylor Starline 56-50
« Reply #3 on: Today at 10:08:05 PM »

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com