Recent Posts

Pages: 1 2 3 4 5 [6] 7 8 9 10
51
Tall Tales / Re: February,29 Mondays of Cawfee,Tea and vittles
« Last post by Johnny McCrae on February 18, 2024, 12:34:22 PM »
My dad gave me a black walnut board several years ago. I started cutting out some pistol stocks yesterday 
Through the years, I've made some pistol grips for myself out of Corian and also Walnut. I used a Rotary-Oscillating Sander to shape the grips. You can easily change the cylinder diameter to suit the area of the grip being shaped. It was similar to the one shown. I bought it from my local Menards store.
52
Spencer Shooting Society / FS Chiappa Spencer rifle
« Last post by Shortgrub on February 18, 2024, 12:33:34 PM »
I have a Chippa in 56/50 cal. that needs a new place to shoot. I would rate this as a 94% condition rifle. Small dings and a couple of small lighter spots on the barrel, excellent bore. $1500 + S&I

  thanks
53
NCOWS / Re: 2024 convention
« Last post by bear tooth billy on February 18, 2024, 10:12:57 AM »
There is a large free city parking lot between River drive and the river. Right now it is usable
and I don't think there will be much snow melt coming. In 2019 everything was under water.
If you can use that it's only half a block to the Hotel. I believe we've had more snow here than
up river.


                                      BTB
54
NCOWS / Re: Question about Joining
« Last post by bear tooth billy on February 18, 2024, 09:58:17 AM »
Welcome, hope you can make it to our (your) convention. A whole weekend of things to do and learn about.



                           BTB
55
NCOWS / Re: Question about Joining
« Last post by Jeremiah Jones on February 18, 2024, 09:44:51 AM »
Welcome partner.  I got my start in CAS while stationed in STL.  There are a lot of good folks in your neck of the woods.
56
Tall Tales / Re: February,29 Mondays of Cawfee,Tea and vittles
« Last post by Major 2 on February 18, 2024, 08:19:11 AM »
That is a very satisfying pastime,
Post some Pictures Slim  :)

57
Tall Tales / Re: February,29 Mondays of Cawfee,Tea and vittles
« Last post by Silver Creek Slim on February 18, 2024, 07:29:33 AM »
Morning y'all.
Coffee and tea are hot.

My dad gave me a black walnut board several years ago. I started cutting out some pistol stocks yesterday,  but broke my last scroll saw blade. I'll see if I can find blades at Ace after church.

'Tis 14 and sunny. High of 35.

Slim
58
The Barracks / Re: Mosin-Nagant Stripper Clips
« Last post by Major 2 on February 18, 2024, 06:52:06 AM »
I guess I should pull it off the wall. I'd need some brass and dyes, but why not  :-\

I have .312 Diameter 167 Grain FP - Grooveless Hi-tec coated Missouri Bullets.

This is the bullet Missouri Bullets offers for Mosin-Nagant, I use them in my SMLE
NO.1 MK.III* and Trailboss out to 50 yds.

59
Shotguns / Re: Shotguns for Vintage Hunting
« Last post by Professor Marvel on February 18, 2024, 02:06:39 AM »
Great fotos, tornado

I must ask, is it even possible to where the bird went after pulling the trigger?

Yhs
Prof marvel
60
The Barracks / Re: Mosin-Nagant Stripper Clips
« Last post by Niederlander on February 17, 2024, 08:47:45 PM »
Trai Boss works great in a Mosin.  Snake Oil's load sounds good, too.
Pages: 1 2 3 4 5 [6] 7 8 9 10
SMF spam blocked by CleanTalk
© 1995 - 2023 CAScity.com