Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
Similar but I grease grooves as they are moly coated.  I use them with any of the BP substitutes but not with BP without a grease cookie
Thanks. Do you grease the grooves with a lube/sizer or just rub some grease in them with your fingers?
2
Tall Tales / Re: Coffee and Tea on a very Independent July
« Last post by Delmonico on Today at 03:39:27 PM »
Went to the gym for the first time with our free Silver Sneakers pass, Rita walked in the pool, I went and did 30 minutes with a thing called a NuStep, made 1800 and a few steps with it set on 7.   Used one at Tabatha and it was what was recommended to start with.   O2 was 96 when done and heartrate was 85, stopped at 20 minutes for about 3 minutes and went back to it.  Didn't take BP thing because it is never a problem. 

Going to get a swim suit and next time meet her in the pool and walk some, she quit early because she saw me waiting.  Wish those 1890 type suits weren't so expensive, will just get a cheap T Shirt to wear because I will admit I look a bit nasty because of my scarring problems.  May scare some of the kids bad.  Almost looks like a 1/2 rope. ::)

3
The Powder Room - CAS reloading / 4227 in .38 special
« Last post by Froogal on Today at 03:34:53 PM »
For cowboy shooting, I've been loading the wife's .38 specials with Trail Boss, but I see that 4227 is also listed for .38 special and would probably provide for a bit more OOMPH than the Trail Boss.

Any opinions? Would the recoil increase significantly?

I have plenty of Trail Boss, but the 4227 seems to be a bit more available at this time.
4
Tall Tales / Re: Coffee and Tea on a very Independent July
« Last post by The Trinity Kid on Today at 03:27:23 PM »
Afternoon all.

Shaping up to be a pleasant day on the Dark Continent. And by nice I mean that it’s 95 at midnight, and we’re in the middle of a dust storm. This weather is starting to make me real sympathetic to the Oakies of yesteryear.  ::)

—TK
5
Similar but I grease grooves as they are moly coated.  I use them with any of the BP substitutes but not with BP without a grease cookie
6
Frontier Iron / Shooting black powder in Uberti topbreaks
« Last post by U.S.M.R. on Today at 02:09:57 PM »
We all know the problems. I’ve been trying to think of a way to do it. The Schofield is actually chambered for .45  Colt and my Russian made in 2011 is actually chambered for .44 Special. I figured that by using the longer cases I can get the powder charge I want, a card wad, and a lube cookie in. Then it’s a matter of trimming the case to length with the compression you want and everything else.
7
Tall Tales / Re: Coffee and Tea on a very Independent July
« Last post by Silver Creek Slim on Today at 01:42:25 PM »
Need to replace the A/C belt on the Avalanche. Of course, the main serpentine belt has to be taken off to put the A/C on.  ::)
Had to replace the tensioner, also. $75 later, I have A/C in the Avalanche again.

Slim
8
Tall Tales / Re: Coffee and Tea on a very Independent July
« Last post by DeaconKC on Today at 10:54:57 AM »
Morning folks, 84 here right now, heading for 91. We were gonna have some family over tonight, but Lady C isn't feeling well, so I cancelled it. If she pushes hard, she gets sick anymore, so I am [over?] protective.Supposed to have a new CAS hat delivered today according to the USPS, a Bailey Derby. Hope I like it and I am expecting an eye roll from the Missus!
9
BROW / Re: What should I look for in a shootable trapdoor?
« Last post by LongWalker on Today at 10:10:58 AM »
Before shopping, try to actually shoot the various sights at close/mid/long-range.  I used to prefer the Buffington sights, especially for long range.  As my eyes have aged, I've found I can shoot the 1879 sights about as well as I could the Buffingtons when I was younger. 

Trapdoors are a wonderful thing for shooters!  They were the end product of 200 years of evolution of muzzleloading muskets and rifled muskets.  The lock is a thing of beauty, designed to soldier on through accidents, neglect, and battle damage.  The sights were intended to be functional for a pooorly-trained soldier while still allowing a well-trained soldier to use them for individual targets or volley fire on an are target.

Of the 20-30 trapdoors I've owned over the years, I've only seen a limited number of broken parts.  Missing parts are more common.  Fortunately, they made about a gajilliion trapdoors, so parts (at least for the 45-70s) are easily available.  The trapdoor is also fairly easy to work on, so almost anything is fixable.   

Before anything else, I check the bore condition.  I know I'll be shooting BP and cast bullets in the rifle, so I have little tolerance for a rough bore.  The problem is that the bore will often be crudded up with layers of fouling, to the point that sometimes the rifling isn't visible.  In general, if I can see deep pits, I reject the gun.  If the muzzle is battered or out of round, I reject the gun--cleaning with that abominable metal rod can result in muzzle damage, and I don't like having to counter-bore a shooter.

I check the chamber for damage.  Damage is usually limited to corrosion, or scratches due to some idiot prying out a broken case with a screwdriver/ice pick/etc.  Once in a while you'll actually find a gun sold as a wallhanger just because there is a broken case in the chamber; this can usually be removed with the proper tools. 

Inspect the sights for damage.  If the front sight is interchangable, damage to the blade is less of a concern.  The problems I've seen here are bases broken loose from the barrel, slots for the blade cut over-size to fit a thicker front sight, and corrosion.  Rear sights, make sure all the adjustments work smoothly--you may need to oil the sight before you can test this.  Rear sights can be re- built or re-placed, but some (Buffingtons for carbines, for example) are hard to find and expensive.  You'll have to use your best judgement here.  If the sight is a mass of rust, plan on replacing (and use this as a bargaining point). 

The action is fairly simple.  Arizona Trooper and Drydock covered the main issues with teh breechblock.  Check to make sure the extractor hook that catches the cartridge rim is present, and sharp.  Check the firing pin to make sure no one has removed the tip so the rifle won't fire, and that the pin moves freely.  On the lock, make sure the tumbler has 3 notches (unless it is an early model, or one of the Bannerman guns fitted with an earlier lock: then you should have a solid half-cock notch and the usual full-cock notch).  Make sure the hammer will not fall from the first two notches when the trigger is pulled. 

On full-cock, make sure the hammer doesn't move backwards slightly when the trigger is pulled, and that when at full-cock you can't push on the back of the hammer and make it fall.  Either would indicate problems with the tumbler or sear, and should be corrected before shooting. 

Trigger pull is going to be heavy and long.  Yeah, there are ways to work on this.  I've had trapdoors I re-worked to a 3 1/2-4# trigger pull, and others that I fitted with set triggers. . . but either alteration is not allowed in some competition, and can be expensive custom work if you can't do it yourself. 

Check for cracks/previous repairs in the wrist, usually coming from the lock bolts (due to over-tightening) or through the wrist (due to being dropped).  You can also find cracks/previous repairs behind the lock, due to the lock being hit when the rifle was dropped.  Personally, I think most such damage was due to rifles falling when stood in a corner on a slick floor. . . .

Pitspitr mentioned bent barrels.  I've had this come up on a couple of rifles too.  Since you can't look through the bore, it can be hard to detect until you shoot the rifle. 

If I were coming in as a novice looking for a shooter, I'd look for a rifle someone was already shooting so I could test-fire it.  One thing about trapdoors being so common is that many shooters do some trading this way.  (Lord knows I'm always searching for the perfect rifle!)  You'll probably pay a bit more this way.  Second-best would be to take someone familiar with the rifle with you when you shop. 
10
Tall Tales / Re: Coffee and Tea on a very Independent July
« Last post by Silver Creek Slim on Today at 10:04:41 AM »
Morning y'all.
Coffee and tea are ready.

'Tis 69 and partly sunny. "Mostly sunny in the morning then becoming mostly cloudy. A slight chance of showers in the morning  then a chance of showers and a slight chance of thunderstorms in the afternoon. Highs around 80. West wind 5 to 10 mph. Chance of rain 40 percent."

Slim
Pages: [1] 2 3 4 5 6 ... 10
SMF spam blocked by CleanTalk

© 1995 - 2022 CAScity.com