Cas City Forum Hall & CAS-L

Special Interests - Groups & Societies => Cas City Historical Society => The Old Fashioned Way => Topic started by: Delmonico on October 04, 2006, 03:25:03 PM

Title: Flattening a Hat Brim
Post by: Delmonico on October 04, 2006, 03:25:03 PM
Often folks have a good quality hat with a modern shape that they want to rework.  If the hat is decent quality that will add another hat to the collection.  Saterday a customer brought in a hat he had bought at a thrift store for me to rework, nice fur felt, grey with a 3 inch brim and a 6 inch crown.   

The first picture is a store bought brim flattener, but one could make one out of a couple pieces of masonite or plywood.  This one has Velcro to hold it shut.  If someone is in a hurry I steam the hat and put it in there.  This one I have a week till they are back so I sprayed the brim with a spray bottle of water and put it in.

The second picture shows it in the device and I have placed boxes of horseshoe nails on it to weight it down more. 
Title: Re: Flattening a Hat Brim
Post by: Delmonico on October 04, 2006, 03:34:59 PM
After sitting overnight it had dried and I took it out.  This is what the brim looked like before I shaped it.  On the crown I worked all the previous shape out of it and made an open crown out of it. 
Title: Re: Flattening a Hat Brim
Post by: Delmonico on October 04, 2006, 03:39:52 PM
After spraying it well with hat stiffener I shaped the brim with a bit of curl and put the pinch-slope crease in the crown.  The customer is going to find a hat band he likes and I have a new liner I made that I will give him. 
Title: Re: Flattening a Hat Brim
Post by: Silver Creek Slim on October 04, 2006, 04:29:43 PM
It's the horseshoe nail box henge.  ;D

What is the green "press thing" under the hat? A hat stretcher?

Slim
Title: Re: Flattening a Hat Brim
Post by: Delmonico on October 04, 2006, 04:34:05 PM
Yep it is, more on that in the next thread. ;)
Title: Re: Flattening a Hat Brim
Post by: Will Ketchum on October 04, 2006, 04:42:31 PM
Del, thanks for the post.  I still have a hat that resists having the crown line up with the brim ::).  If you ever an make it to the NCOWS convention before Sunday I'd like to have you look at it.

Will Ketchum
Title: Re: Flattening a Hat Brim
Post by: Kid Raven on October 04, 2006, 04:45:26 PM
The first picture is a store bought brim plattener, but one could make one out of a couple pieces of masonite or plywood.  This one has Velcro to hold it shut.  If someone is in a hurry I steam the hat and put it in there.  This one I have a week till they are back so I sprayed the brim with a spray bottle of water and put it in.

The second picture shows it in the device and I have placed boxes of horseshoe nails on it to weight it down more.  

Back when I was in the US Army during Basic the DI's had masonite hat presses with a hinge at one end and a catch at the other end to store their smokey bear hats in, so they always had that nice flat brim.
Title: Re: Flattening a Hat Brim
Post by: Ozark Tracker on October 04, 2006, 04:53:19 PM
Del, this is a good post, I have an old hat,  I've had it 25 years, that needs the whole works, straightening out and reshaping, may give it a try

Del, thanks for the post.  I still have a hat that resists having the crown line up with the brim ::). 

Will Ketchum

Will, I have one hat that just looks off no matter what,  it just doesn't line up. never did.
Title: Re: Flattening a Hat Brim
Post by: Delmonico on October 04, 2006, 04:59:22 PM
Are your heads crooked, not that uncommon. 
Title: Re: Flattening a Hat Brim
Post by: Delmonico on October 06, 2006, 12:16:04 PM
My customer picked up his hat last night, we did a little minor tweaking on it, he was surprised how well it came out for what we started with.  Anyway here is the liner I made for it, after he put in on a few times and we tweaked it a bit, the wrinkles came out of it.

I have to make some more liners soon, that was my last one.  They are simple and I'll take pictures and post a how to when I make some more.
Title: Re: Flattening a Hat Brim
Post by: Steel Horse Bailey on November 11, 2006, 12:04:09 AM
Cool, pard!
Title: Re: Flattening a Hat Brim
Post by: Professor Honeyfuggler on September 07, 2009, 01:57:51 AM
I learned something interesting about flat hat brims while talking to hatmakers about a special hat I was looking for. If you happen to want to keep a brim really flat, ala the Wyatt Earp hat in movie Tombstone, its important that the crown be the correct shape to fit your head. If you have a long oval shaped head, like I do, and put on a hat that's shaped to fit an oval or round head, the front and the back of the brim will droop. No amount of brim pressing will correct that

That's why to get a real custom fit, the best hatmakers measure the shape of your head, along with the size, with a device that looks like a medieval torture hat. Then they block the hat form to the dozens of measurement it takes, so the hat will conform precisely to the shape of your head without stressing the brim to cause it to deflect or buckle.

And learning that fact solved the mystery of why most stock hats, at least the stiff ones, don't fit me well, even when the tags say they're the correct size. Pulled down tight against the front and back of my head there's sometimes a 1/4" of airspace on the sides where it doesn't touch my head at all.

 
Title: Re: Flattening a Hat Brim
Post by: Buffalow Red on September 07, 2009, 05:21:19 AM
so were is the hat store Delmonico
Title: Re: Flattening a Hat Brim
Post by: Shotgun Franklin on September 07, 2009, 10:27:33 AM
I worked with a retired Soldier who had been a DI for awhile. He really missed his hat. He told me about that press they used on the brim and said that they'd spray the brim with starch, like you use for ironing. He claimed that the starch helped hold the shape.
Title: Re: Flattening a Hat Brim
Post by: Angel_Eyes on September 07, 2009, 01:43:19 PM
Del, what do you use as 'hat stiffener'?
Is it commercially available or is it your own recipe?
One of my hats resists all attempts at shaping, (I think it may be wool felt and I may be wasting my time).
It looks like something a hillbilly may have thrown away.

AE
Title: Re: Flattening a Hat Brim
Post by: Professor Honeyfuggler on September 07, 2009, 09:49:03 PM
Del, what do you use as 'hat stiffener'?
Is it commercially available or is it your own recipe?
One of my hats resists all attempts at shaping,

I've heard tell that some of the special forces folks that wear berets, with an upswoop for their insignia, swear by hairspray. They say it's more water resistant than starch.  ;D
Title: Re: Flattening a Hat Brim
Post by: Delmonico on September 10, 2009, 05:20:53 PM
I work at The Fort Western in Lincoln Newbrassky in The Old West Shop.

Hat stiffener is nothing but white "natural" shellac mixed with enough denatured alcohol to make it go through a spray bottle.

Hat fit is very important, got a thread around here ot that somewhere.
Title: Re: Flattening a Hat Brim
Post by: Delmonico on September 10, 2009, 05:22:03 PM
http://www.cascity.com/forumhall/index.php/topic,11542.0.html
Title: Re: Flattening a Hat Brim
Post by: GunClick Rick on May 01, 2010, 09:29:37 PM
I just did this one for KT ;D

(http://i7.photobucket.com/albums/y283/gunclickrick/indiancowboyhat010-1.jpg)

(http://i7.photobucket.com/albums/y283/gunclickrick/indiancowboyhat009.jpg)

Title: Re: Flattening a Hat Brim
Post by: St. George on May 15, 2010, 09:21:03 AM
The 'upswoop' seen on a beret is actually the cardboard stiffener as installed by the maker.

It supports the flash and distinctive unit insignia or rank, if worn by an Officer.

They sometimes get trimmed by the individual trooper in order to better fit their head.

The flash is sewn through the stiffener.

I've never resorted to anything but water to stiffen and shape my beret - wetting, shaping and letting it air-dry has always ensured a neat appearance, and rolling/folding it properly aids in that.

As an aside - during and after WWI - soldiers would stiffen the brims of their Campaign Hats with a sugar and water mix - letting the hat dry near the stove.

They'd also put snow on the curling brims overnight - again setting them near the stove to dry them.

Vaya,

Scouts Out!
Title: Re: Flattening a Hat Brim
Post by: WaddWatsonEllis on May 15, 2010, 10:37:09 AM
Rick,

I coulda done it in two or three days of wearing it loading hay .... LOL

St George,

Yup on both counts on the beret .... wore 'em for eight years ....

P.S. That is my school graduation pic; I ended up with wreaths on both my sets of wings ...
Title: Re: Flattening a Hat Brim
Post by: Delmonico on May 15, 2010, 10:44:06 AM
Rick,

I coulda done it in two or three days of wearing it loading hay .... LOL



Yeah but then the sweat stains would have looked real.  Never understood why it was so hard to sweat up a hat so one had to have fake ones put on.  They always look so fake anyway and folks laugh at them behind their backs.

The non-fake "distressed" look.

(http://i72.photobucket.com/albums/i200/Delmonico_1885/sigs/DelStirrin.jpg)
Title: Re: Flattening a Hat Brim
Post by: Steel Horse Bailey on May 15, 2010, 07:29:55 PM
Yeah but then the sweat stains would have looked real.  Never understood why it was so hard to sweat up a hat so one had to have fake ones put on.  They always look so fake anyway and folks laugh at them behind their backs.

The non-fake "distressed" look.

(http://i72.photobucket.com/albums/i200/Delmonico_1885/sigs/DelStirrin.jpg)


This MUST be true:  If I see you in that hat, I feel distressed! 

 ;) ;)

 :D


 ;D ;D ;D ;D ;D


Sorry, Bud - I just couldn't resist!
Title: Re: Flattening a Hat Brim
Post by: Delmonico on May 15, 2010, 07:48:29 PM
But Jeff, at least you'd feel well fed. ;)  Besides all that dirt or rather the dirt, soot, flour. lard and other stuff including the chocolate stain (It blew into a pan that was soaking that Gopher Grease had mixed up a chocolate in.) were honestly earned. 
Title: Re: Flattening a Hat Brim
Post by: Steel Horse Bailey on May 16, 2010, 08:41:41 PM
VERY Honestly! 

My favorite hat, a Renegade, looks very sweated in/on ... because it is.  But it also has those tell-tale odd little ding markBP cartridges repeatedly bouncing off it!