Can replacement cylinders and conversion rings be found?

Started by C. Note, February 23, 2023, 07:19:24 PM

Previous topic - Next topic

C. Note

Hello CAS Friends,

Do any of y'all know if replacement conversion cylinders/conversion rings/ejectors, etc for the Pietta/Uberti conversion
revolvers be had?If do, from whom? I have searched through Taylor's and VTI parts listings and see nothing for the conversion revolvers.

Please advise.

Jason
C.Note/SASS #2029

45 Dragoon

www.goonsgunworks.com
Follow me on Instagram @goonsgunworks

C. Note

Thanks. They only carry the conversion cylinders that they make.

I am seeking direct replacement parts for Pietta/Uberti conversions. There has to be replacement cylinders and conversion rings and ejectors available, from some place.

Abilene

Look again.  The conversion rings and cylinders and ejectors can be had from VTI, Cimarron, etc.  Every part except the frame can be bought. 

Pietta does not make conversions.

Cheyenne Logan

Abilene, thanks, thought I had missed something on Pietta!! ;D

Coffinmaker

 :) C Note  ;)

PLUS ONE for Abilene and The Dragoon >

Just to reiterate, Pietta does not make any sort of conversion.  The only conversion parts for Pietta are from Kirst Konverter, which includes the Cylinder, Breach Ring and Two Step Hand, or the R & D type two piece drop in cylinder from Howell Old West Conversions and Taylor's and Midway USA has been known to carry Howell cylinders.

Professor Marvel

Ubert makes a revolver that They call the

1858 ARMY CONVERSION New Army
AVAILABLE CALIBERS:  .45 Colt
Available Models:   341001

https://www.uberti-usa.com/sites/default/files/styles/xx_large/public/content/images/2022-09/341001-1d.png?itok=YL6JBkcK

https://www.uberti-usa.com/cartridge-revolvers/new-army-conversion-army-navy-conversion-open-tops

This has been offerd by Taylors, and in the past they offered replacement parts. A friend purchased a cylinder and "conversion" ring from them and I bought a pair of "conversion rings" .
These are splendid rings which must be fitted and " driven on" a stock percussion revolver, but with careful filing and fitting and patience it does work, yielding a revolver permanently modified into a cartridge conversion. This is yet another of my projects stuck in limbo...

However since a bit before covid MANY parts have been listed "out of stock" and last I looked no parts for the "conversion" model were available.

Best bet is to contact Taylors (whose website is down as of 2am mst june 5 ) or VTI specifying the aformentioned uberti model info.

Here is a test report on it

https://www.gun-tests.com/handguns/revolvers/taylors-company-1858-remington-conversion-45-colt/

Hope this helps
Your Humble Servant

praeceptor miraculum

~~~~~Professor Algernon Horatio Ubiquitous Marvel The First~~~~~~
President, CEO, Chairman,  and Chief Bottle Washer of


Professor Marvel's
Traveling Apothecary
and
Fortune Telling Emporium


Acclaimed By The Crowned Heads of Europe
Purveyor of Patent Remedies, Snake Oil, Powder, Percussion Caps, Cleaning Supplies, Dry Goods,
and
Picture Postcards

Offering Unwanted Advice for All Occasions
and
Providing Useless Items to the Gentry
Since 1822
[
Available by Appointment for Lectures on Any Topic


Professor Marvel

Your Humble Servant

praeceptor miraculum

~~~~~Professor Algernon Horatio Ubiquitous Marvel The First~~~~~~
President, CEO, Chairman,  and Chief Bottle Washer of


Professor Marvel's
Traveling Apothecary
and
Fortune Telling Emporium


Acclaimed By The Crowned Heads of Europe
Purveyor of Patent Remedies, Snake Oil, Powder, Percussion Caps, Cleaning Supplies, Dry Goods,
and
Picture Postcards

Offering Unwanted Advice for All Occasions
and
Providing Useless Items to the Gentry
Since 1822
[
Available by Appointment for Lectures on Any Topic


Cheyenne Logan

Are these Uberti Markings? Looking at the way the rammer enters the frame puts me in mind of a Pietta product??? Just trying to clarify......

Cheyenne Logan

Quote from: Professor Marvel on June 05, 2023, 04:11:19 AM
I stand corrected , it seems Cimaron may have the parts

https://www.cimarron-firearms.com/1858-new-model-army-conversion-parts.html


Those parts are for the gated conversion, but is there a listing for the Preacher/Angel eyes conversion??

Major 2

when planets align...do the deal !

Cheyenne Logan

Everyday you learn something, Pietta DOES make a conversion, they make the 1858 "Angel Eyes" and "Preacher" for Cimarron! Confirmed by Valerie.......thought those guns had Pietta profiles.....;)

Cheyenne Logan

Another interesting thing is that Cimarron has the Preacher/Angel eyes conversion cylinders in stock as parts!! ;D and reasonably priced!!  Six shot, made by Pietta for their 1858.

SMF spam blocked by CleanTalk
© 1995 - 2024 CAScity.com