-
OK pards, it is time to show off your talents. I would like to see pictures of holsters, belts, sheaths, etc.... that you have made yourself. Let's see what ya got!!!!
-
Here's a rig I made for Modern Day Cowboy
-
This one I made for Eot '04 Sass Scholarship raffle. I work part time for John Bianchi. It's his outfits makers mark on the holster loop.
-
KC,
Damn those are nice! I couldn't even make the wallet or the key fob at camp when I was a kid, so I am very jeleous of you talented folks!
-
Wow KC! you do some really nice work.
-
Thanks J.D.
I have the best teacher you can get.
-
Howdy, These Rigs not only look Fine, the fit and finish is fantastic.... ;D....you really need to see the rigs he has made for hisownself and other Pards...they all are works of Art..
Matter of Fact, The Kid is going to make me a New One,but this one will have 2 strong and 2 crossdraw holsters...so that i can shoot Gunfighter,or Classic Left or Right handed depending on my mood that day.....Yee Haw
Take Care.........
-
This is the rig I've been using for the last year and a half. It's made by David Creger of Walker '47. He made everything, including the sheaths for the Bowie knives, to match.
-
Irish Red,
Real nice outfit there pard. I especially like the double set of bowie knives..... Very "WARTHOG" of you!!!!
-
Thanks AK. Call it the Old West version of Tackleberry (from the Police Academy movies)!! :P
-
NOT MY WORK..
Vaquero Leather - Leonard Lay www.vaqueroleather.com
This rig was made for my son. It has stood up well to almost two years of use. Adios,
-
Just some stuff I've made...
-
:o
"Touch da gun, Feel da gun, Become one with the gun." ;D
-
Here is some of my stuff.
-
A few more
-
couple more
-
How do you do an inconic link to photos? I'd post them here, but they take up so much space and the iconic links are a good way to do photos without slamming them in everyone's face.
-
Hello all,
Here's some pics of some of the stuff I've made. I might break it down into a couple of posts to keep it simple.
Thanks for looking,
Laff-a-lot Louie
[Dead link removed by moderator]
This is a 4" belt pouch. I also offer a square loading strip that will fit inside of this pouch.
[Dead link removed by moderator]
This is my most recent holster. It was a ton of fun to make and I love to wear it.
[Dead link removed by moderator]
Just had to have me some cuffs. I have only worn them to one shoot so far but it won't be the last.
-
OK, here goes. We'll see how this uploading photos works. Here's some of my stuff:
-
Well, that was successful. Lets throw up (no comments here) a couple more.
-
Great stuff posted so far! I look forward to viewing more work from everyone.
-
;D Here are two i made for some of my Club Pards.
[attachment deleted by admin]
-
Here are two of my holsters i have made for a couple of pards ;D ;D
[attachment deleted by admin]
-
Hmmm seems my pc Doesny like me today and wont post the pics >:(
-
>:( >:( I'll try this again
Here is one of my holsters.
[attachment deleted by admin]
-
:o :o
Hope this works now
I make all my own rigs but it seems I make more for other pards these days.
[Deleted by moderator - Link Lost]
-
What happened to the 3rd page?
-
Here are the rigs I made for me and Tricky Trina
-
:o :o
Hope this works now
I make all my own rigs but it seems I make more for other pards these days.
[Deleted by moderator - Link Lost]
When you put the Conchos on the holster, did you do it before you lined it or after you lined it? I am curious because I am making some more slim jims and was thinking about putting Conchos on the holster then lining it. This way I possibly could avoid damaging or scratching my sixguns.
-
Howdy Tommy
I put the conchos on before I line the holsters. ;D ;D. You dont want to put them on after or you will scratch the guns :'( :'(.
Hope this helps.
-
Watch this space for Irish Red O'Toole's new rig. I'll post a couple of pics after he receives it. ;D
-
Well, I made my very first holster this last weekend. Keep in mind, it is my first attempt. I learned alot. The next one, which I start tonight, will incorporate what I've learned. :)
-
That's a good holster, Unc. I'm looking forward to seeing the next one.
-
Uncle Chan,
Mighty fine for your first holster. I can't wait to see what you're turning out once you've learned this art. ;)
Later,
Laff-a-lot Louie
-
Thanks for the encouragement, gents. I greatly appreciate it. I started the match to the above one tonight. We'll see how it turns out. Already made a bit of an oops with the stitch groover. Oh well....we're all human, after all. :)
Night, all!
Uncle Chan
-
Attention...
Irish Red O'Toole will now be sporting this on the range. ;D
There is a matching shotgun belt and cartridge slides on the way.
If he scratches this there's gonna be hell to pay... ;D
-
Kid, that is truly beautiful. I do feel for you as I know it has to be a personal delima, wishing each one could be kept for ones self!
-
Wow Kid! That's sharp. Very nice art.
-
Camille's right, Kid. That rig goes way beyond being just a holster set. Truly fine looking work.
-
Wow, 'ol Irish is turning into quite the dandy with that rig. That looks like something from the set of the old 'Wild, Wild West' TV show.
Next thing you know he'll be wearing silk shirts, ties, and vests to go with it.
-
Well since we are showing off. I do not do Cowboy leather but I do leather work.
I specialize in reproduction comic book costumes.
Here is my finest one I did for myself that I wore (and made Variety Magazine to boot) - copy of Halle Berry's X-men movie costume
[Deleted by moderator - Link Lost]
-
Great work Doc, do you not think there would be enough money in speacialty western leather clothing to be profitable? I have seen some staggering prices on Duke type vests, botas and other items that would fit your specialty style of working in light weight leathers.
-
Great work, Doc. That takes talent.
-
Well, that was successful. Lets throw up (no comments here) a couple more.
OK how do you do it? :o I got a ton of stuff on a disc and in my files!
-
Attention...
Irish Red O'Toole will now be sporting this on the range. ;D
There is a matching shotgun belt and cartridge slides on the way.
If he scratches this there's gonna be hell to pay... ;D
Beautiful KC.......Really nice job!
I really liked the color on that one. What is it are there more than one color used. I'm wanting to do a almost Ox blood color and then, go back over with a darker brown to settle in the low areas like antiquing, Maybe even take off some of the dark with an alcohol rub to bring out the red in the highlights. You got just what I'm looking for!
-
Rap,
I used a pigmented neatsfoot oil first then went over it all with a medium brown antiquing stain. The stain settles in the low areas and then I use a horsehair wheel to burnish and remove the stain. The neatfoot oil is gonna stay my secret. ;)
-
OK how do you do it? :o I got a ton of stuff on a disc and in my files!
Here's a thread where I explained how to post pictures: http://www.cascity.com/forumhall/index.php?topic=4839.msg55818#msg55818 (http://www.cascity.com/forumhall/index.php?topic=4839.msg55818#msg55818) Looking forward to seeing what you have. :)
-
Hi All,
Just finished my second 1911 holster. What do you think? Any advice? Learned even more. Next one will incorporate these lessons.
Thanks!
Uncle Chan
-
Those look good. My only advice at this time is to keep crankin' them out. That's the best way to improve our skills. I seldom make one exactly like the one before because I always have something I want to do differently. One thing I like to do on that type of holster is to sew in a small wedge of leather between the sides at the top around the trigger guard area so the holster doesn't grab the pistol as much so they're easier to pull out and the bluing doesn't get worn off so fast. Another way to accomplish the same thing is to put a strip of leather all the way down the stitch line between the sides to make the whole holster easier to fit to the gun. It isn't better necessarily, but it gives you another option.
-
Howdy everyone!
I'm new to this group, and to leatherworking. I completed my first project which is a Slim Jim holster from a Will Ghormley pattern. The engraved design is very close to a photo of a holster in Packing Iron.
-
That's an outstanding first holster, Dark Star. I really like the way you carved it to look period correct. I've been trying to decide what to do on a pair for myself. I'll have to give that style of carving good consideration.
-
Been doing leather work for about 9 years for myself and now I've finally got the better half to start shootin so I had to made her something worthy for her. And I wanted it to be very girlie. She was very pleased on how it came out. ;D
The only Red leather that I could find was embossed with a alligator print, so seeing I didn't need to do any carving, I added a few spots.
-
Outstanding work! What kind of carving is that? Does it have a name?
-
Outstanding work! What kind of carving is that? Does it have a name?
Thanks. I call it Albert. ;D
Seriously though, I don't know if it has a particular name, but it's done with a swivel knife alone. The design on my holster is from a Will Ghormley pattern and almost exactly a duplicate of the design on the holster on page 86 in Packing Iron. In fact, I scanned that photo and managed to make a duplicate of that flower engraving, but to do it right will take a finer swivel knife blade than the one I have. So far the most time consuming part of this is saving for and then ordering/waiting for tools and supplies to arrive. Meanwhile I'm scanning the photos, tracing the patterns and then completing the missing portions by using the visible half as a guide. I'd love to be able to see the entire original item one day.
I am curious to learn more about this style (I've seen it referred to as a "Wedding Band" design somewhere) and right now I'm trying to find more information about it as well as border tooling examples. I also have a copy of "Cowboys and the Trappings of the Old West" and "Peacemakers" that show some examples, I'm looking for a good example of a period correct belt to go with the holster.
-
That's an outstanding first holster, Dark Star. I really like the way you carved it to look period correct. I've been trying to decide what to do on a pair for myself. I'll have to give that style of carving good consideration.
Thanks for the kind words Marshall Will. It was made for my '58 Remmie and I felt that style would be appropriate for the time period of the gun.
I have lots to learn but I'm enjoying myself ;D
-
Howdy Pards.
I have some pictures that I took with my digital camera. Today the Daughter and Son in law came over for crab and clams. I got him to put the pic into a file I might be able to e mail them from. I have no hosteing sight but I might be able to send them to a Pard that does. Can I get a hand from a Pard that does? Thanx.
Beaumont
-
E.R.
Go here http://www.cascity.com/forumhall/index.php?topic=4839.0 (http://www.cascity.com/forumhall/index.php?topic=4839.0)
Marshal Will has posted good instructions for uploading from your own computer without haing to have a host site.
-
Kid, Pard thanks for the help. I tried but my size was too big. I left a note about that on the other half of this thread. "what happened....." and The Marshal offered to resize them for me if I sent them to him. I just got through doing that, so I guess that the pictures will be in that thread. Look for them later after The Marshal gets a chance to resize them.
Regards, Beaumont (Added) I made these two sets of holsters for the Prize Table at our annual match, Standoff at Smokey Point in Sept
-
More pics by E.R.Beaumont
-
More pics by E.R.Beaumont
-
Some good stuff, ER. Thanks for posting them. Thanks to the Marshal for helping with that, too.
-
Howdy ER........
Just wanted to say they look really nice, I like that older, well used look you got, and the very novel and pleasing look to a pair of skins for those Schofields.....WOW!
-
ER, those look great. Truly a work of art!
Here's one I just finished tonight. A friend of mine wanted a new holster for his S&W 645. I put this together for him. What do you all think?
Uncle Chan
-
Looks good, Unc. I like the way you used the flower center as a repeat pattern.
-
Thanks Marshal. That same friend I made the holster for made himself a belt with that pattern. I made him a holster and a key keeper with the same pattern.
I've also learned that the most simple patterns and tools make, in my opinion, the best designs. I've a copy of Packing Iron and the carving and stamping on many, if not most, of the holsters are just basic tools with basic designs.
Also, thanks Marshal for the information on the edger. What you were saying makes PERFECT sense now to me. I'll be tracking down a #1 beveler and making some modifications on it.
U.C.
-
Remember, Unc. If you can't find the right tool, you can always make one or turn a larger one into the size you want with a set of Swiss files. I've done that on many occasion. Just remember to polish the tip well so it doesn't drag on the leather.
-
Attention...
Irish Red O'Toole will now be sporting this on the range. ;D
There is a matching shotgun belt and cartridge slides on the way.
If he scratches this there's gonna be hell to pay... ;D
As the proud owner of this true work of art, let me tell you all something. Kid Cavalier is one of the best leather makers I've ever seen. The attention to detail and the workmanship are not to be believed. I used the whole rig (shotgun belt and cartridge slides too) this past weekend. I lost count of how many people were staring at it and making comments about the rig. I think when I opened the box, I heard angels singing. Truly a beautiful rig. Way too good for me, but I'll manage to work through it somehow!! ;D ;)
-
If it gets too difficult, Red, send it to me and I'll find a use for it. :D
-
Greetings and Salutations to one and all.
Pards and Pardettes, What nice stuff! Unk, Pard I love the" Phantom" double auto rig. It would go real good with The Doc's leather suite. Doc, Pardette that is a work of art, you could have a future making custom cycle leather wear. Probably more money in BD stuff though. Dark Star, Pard for a first try you done better than I did on my third. Nice touch with the decorative cuts. Guano, Pard I love the RED, the cut of the belt is just great real classy. Tommy, Pard I especially like the '51 Colt holster, the Black one with the fringe and the turquoise spots. And the rest of you Pards have done some real nice stuff. Of cource the Kid's stuff is remarkable, I am just enamored with the concept of using firearm engraveing patterns for the carving, Brilliant!
Just my two bits in the kitty
Regards Beaumont
-
E.R., Thanks for the compliment. The wife really likes it. And it fits her very well. I had to do alittle thinkin on the shape as you know, girls are shaped just a bit different. It was alot of fun to build.
-
Here's a picture of the latest knife sheath I made ( I also made the knife ;)):
(http://img333.imageshack.us/img333/6315/dscf05488ge.th.jpg) (http://img333.imageshack.us/my.php?image=dscf05488ge.jpg)
(http://img232.imageshack.us/img232/1828/sheathclose5yx.th.jpg) (http://img232.imageshack.us/my.php?image=sheathclose5yx.jpg)
-
I don't know which I like better, the knife or the sheath. Good work, pard.
-
Greetings and Salutations to one and all.
Pards and Pardettes, What nice stuff! Unk, Pard I love the" Phantom" double auto rig. It would go real good with The Doc's leather suite. Doc, Pardette that is a work of art, you could have a future making custom cycle leather wear. Probably more money in BD stuff though. Dark Star, Pard for a first try you done better than I did on my third. Nice touch with the decorative cuts. Guano, Pard I love the RED, the cut of the belt is just great real classy. Tommy, Pard I especially like the '51 Colt holster, the Black one with the fringe and the turquoise spots. And the rest of you Pards have done some real nice stuff. Of cource the Kid's stuff is remarkable, I am just enamored with the concept of using firearm engraveing patterns for the carving, Brilliant!
Just my two bits in the kitty
Regards Beaumont
Thanks E.R.
I also echo your comments on everyone who has posted their work. We truely have an outstanding group of folks who drop by here.
Kid
-
I don't know which I like better, the knife or the sheath. Good work, pard.
Thanks Marshal. That was only my 6th sheath or so. Here are a couple more:
(http://img156.imageshack.us/img156/5051/eatmanknife26ym.th.jpg) (http://img156.imageshack.us/my.php?image=eatmanknife26ym.jpg)
(http://img42.imageshack.us/img42/4718/dscf04923yg.th.jpg) (http://img42.imageshack.us/my.php?image=dscf04923yg.jpg)
Thanks for looking ;D
-
We truely have an outstanding group of folks who drop by here.
That deserves repeating. :)
-
Here are some Pics E.R. Beaumont sent me to post.
-
one more...
-
Nice touch dying the lining the same color as the trim color, ER. I don't know that I'd have thought of it.
-
Howdy Pards.
Marshal, Pard I didn't dye the linings to match the trim, I dyed the trim to match the linings. The whole time I was planning them Yellow holsters the Red lining was screaming at me. I was going to make a belt out a piece of dark brown predyed pebble grain chrome tanned I have. Yup the belt was a question but the color of the lining never was.
Now that I have finished that belt I can get on with two other belts that I need to make. One is a leather shotgun belt, I built a set of Schofield holsters with a really big belt loop to fit over a full shotshell belt. I have an ammo pouch that fits over the full belt to hold pistol/rifle ammo. I wanted to get fancy and make the shell loops with bottom tabs sewn to the belt, but I don't think that I am ready for that quite yet so they will only have a speed bump sewn on under them. Belts and bullit loops are where I want a stitcher, oh well winter is upon us so I have plenty of time for sewing.
Just my two bits in the kitty.
Regards, Beaumont
-
I just got these holsters today from Springfield Slim (Whyte Leather Works) and I absolutely love them! They fit my Remington NMA 5 1/2" (top) and my Uberti Cattleman 4 3/4" (bottom) perfectly.
Here is a blatant plug for Slim:
http://www.whyteleatherworks.com/
John
-
After looking around for a holster for my S&W New Departure, and failing to find one, I decided to try my hand at making a holster. I think I did about everything I could wrong, but it's mine and I plan on using it. Many thanks to Chuck Burrows (Nolan Sackett) for his help when I got stuck.
First attempt at carving also.
[Deleted by moderator - Link Lost]
-
Doc- I think it looks great!
At first I took it for a vintage original holster. I don't know if that is what you were trying to accomplish, but it looks very convincing!
Nice job :)
John
-
Thanks, and I did want to get an aged look. Nolan Sackett is a master and gave me some pointers. I used to build powder horns and engrave them and I antiqued them so they looked period. Thats half the fun.
-
That's a fine holster, Doc. Looks good. What will your next one be?
-
Marshal, I have three knives I want to make sheaths for soon as I figure out what kind (belt, boot, etc.). Might make one for a derringer I have. Been trying to sell the derringer but might help to sell it if I made a holster.
-
Be sure to post pics, Doc. You make a good-looking holster, it may help.
-
Here is my second holster and my first belt - made to match my first holster I made a few weeks back.
I made it with leather I had on hand, the belt is a bit too flexible for my liking (made with 8-9 oz) but it turned out nicely and I learned a few things...again :D
-
Here's another photo - a bit closer. I was actually able to get a grip on using the creaser to get the grooves in the bullet loops looking the way I wanted.
-
Good work, Dark Star. Keep 'em coming.
-
I agree!
Very Nice.
I like the combination of stamps you used on the belt.
May have to steal that....
Kdi
-
I agree!
Very Nice.
I like the combination of stamps you used on the belt.
May have to steal that....
Kdi
You're welcome to the design, I'd like to say it was my idea but that's not the case :) The pattern was pictured on the outside of the pattern pack I used for the belt. The picture was kind of blurry but after a little closer study I got it.
I'm practicing my carving skills these days, but I'm also facinated with border designs, especially the late 19th century patterns. I have a copy of "Packing Iron" and "Cowboys & the Trappings of the Old West" but I'm always looking for more good examples.
-
please go to my photo page and browse some of my work.
http://photobucket.com/albums/c129/c42r537c72f8/
-
Good work, Charlie. Thanks for posting the link.
-
Thanks Marshall,
I do love to piddle.
-
Feel free to post pics of your piddling anytime. I like all types of leatherwork. Here'a a pic of a chair I made a few years ago. The frame is thin-walled mild steel and chrome moly tubing. I welded jigs as I went to make more frames if I want to. The leather was wet molded to fit the pieces.
-
Hey Marshall,
I don't call that piddlin', I call that art and my compliments to the artist.
::)
-
Will, you woulldn't consider....?
Would you?
-
Thanks for the kind words, Charlie. I keep thinking I should make another one, but it's a might amount of time to toss one of those together. When I have more time, I will, though.
40R, that would take some serious consideration. :D
-
That's a fine lookin' chair, Marshal!
-
My latest quiver and arrow. Quiver was stiched with sinew (kind of a pain!).
[dead photobucket link removed by moderator]
-
Nice quiver, Mo. I like the decorations on it. They really add to it.
-
Here's a pair I just finished. Wanted to try a pair un-lined. Sprayed leather sheen on them, wish I hadn't . Maybe someone can tell me how to cut the shine! I figure maybe rub with alcahol ? I won't touch them till I know how.
[Deleted by moderator - Link Lost]
-
Beautiful holsters, pard. I like the color with the full tooling.
I've never used leather sheen. Does the can say what the solvent is for the stuff? Worse case, you can put some on a scrap and try removing it with alcohol to see how it works.
-
Very attractive carving.
A little degazer on a wool pad should cut the shine for you. But like Marshal Will said, try it on a scrap first.
-
Here's some of my stuff.
100 Round .38 Caliber Cartridge Belt
[Deleted by moderator - Link Lost]
30 Round .45 Caliber Cartridge Belt
[Deleted by moderator - Link Lost]
2 Piece Spur Straps
[Deleted by moderator - Link Lost]
1860 Open Top Conversion Holster
[Deleted by moderator - Link Lost]
Reverend Bob
-
Nice work, Rev. I like the double row belt. Fine work.
-
Marshall Will
Thanks
Reverend Bob
-
Nice looking belts and holster Rev.
SR
-
That's a nice double row belt. You won't be running out of shells anytime soon!
-
I've been playing with a normal sewing machine and upholster weight leather. I made this shotgun shell belt like a money belt. I need to dye the edges so they aren't purple.
[Deleted by moderator - Link Lost]
The buckle adjusts by sliding the belt through a slot in the belt. All the parts are made from a double thickness of leather. This makes for a light weight very flexible belt, hopefully not too flexible.
SR
-
Let us know how that belt works after you can try it out, SR. It looks like a good design.
-
Thanks for the kind words Marshall, I'll let you know.
SR
-
Nice, Rev. I like the wide border on that rig.
-
Rev, nice looking stamping on that belt and holsters.
SR
-
B-Western "Here I Come" I had to make a new rig for a new shooting class, so I threw this rig together. It was my first attempt at a Buscadero rig. It'll work for a brown rig but my next project is a black rig like a Western Star from the Bar 20 wore with floral carving.
[Deleted by moderator - Link Lost]
-
Nice, even stamping on the basketweave, Guano. Looks good.
-
Thanks Marshal.
-
Gotta ask, Guano, are the holsters pressed flat? Laying on that floor I can't see if there's a curve where the holster folds and goes through the belt? Beutiful work! RHR.
-
Rocking Horse Ralph, Thanks for the complement. The holsters aren't pressed flat but the fold is. They have already been wet molded for my USFA pistols.
-
Ralph, to reduce the shine (sheen ?) try using some Tandy Satin Sheen. It will also help to protect it from moisture a bit more as well.
I did a sword scabbard for a gent here in Australia and used NeatLac on it at first, but there was too much of a gloss finish (I thought i looked OK ) but was talked into reducing the shine.
Regards.
-
Thanks Judge! I just happen to have a bottle in my drawer. I'll let you know how it works for me. Can't tonight though, good bowl game on! :D (sorry about my alias change) RR
-
Double Strong Side Rig
[Deleted by moderator - Link Lost]
Reverend Bob
-
Looks Good, Rev. What did you use for the antique finish?
-
Tandy's Antique Stain (Dark Brown) with a final finish of Neat Lac (Spray)
Thanks
Reverend Bob
-
They used to have about a dozen colors of antique stains. Last time I looked, they only had a couple. The most commonly used ones, I guess.
-
Finally finished the belt for my new holsters. Still haven't de-glazed the holsters, won't make that mistake again! Wanted to try a set unlined, but don't like the light weight. About ready to use my good leather and make a good set, now with a little practise under my belt. RR.
[Deleted by moderator - Link Lost]
-
Looking forward to your new set, RR. This set is good so it'll be nice to see how you change them for the next. ;)
-
Here is a photo of my lined holster for my Army 44, and the sheath for my Searles Bowie.
I did the leather work. The Searles Bowie blade is from Dixie Gun Works as are the raw castings for the guard, pommel,etc. The wood is African Blackwood.
Watch yer topknot
Triggersmith
-
Trigger
Good looking work. Is that a piano there sitting on?
Reverend Bob
-
Your Revness,
Is that some cobwebs i see on that double rig?
Triggersmith
-
Here's a couple of my latest projects.
I shared the picture of the slim Jims on the old Frontier Spot but since it died a while back...
The other is my latest experiment. I say "experiment" because I had never done a basket weave before and I never had done a two tone project. Also I made a new pattern for it and had to expirement a little to get the end plug right. Overall, I was happy with the way it turned out except that the dye bled into the monogram letters >:( :o (I'd sure appreciate any suggestions on how to avoid that.)and I found that I should have made the skirt a half inch longer.
-
I have a little bitty paintbrush I use for two-tone jobs. I make sure that where the dye ends, there's a swivel knife cut to define where the color ends. Using a small amount of dye, I paint dye right up to the edge, watching how it soaks in. Too much dye and it bleeds past the cut. In this photo, the light areas in the darker dye are wear and not a function of coverage. Pay particular atttention to the trim paint on the airplane. There's a light swivel knife cut to define it but no beveling on either side.
-
just finish to make a couple of holster for a friend.........
[Deleted by moderator - Link Lost]
look nice........... ;) ;D
-
Thanks Marshall!
I must have used too much dye. It looked good when I left it, but when I came back to it it had bled into the letters.
-
Nice holster Kaboom! I like the point design on the cuff thingy.It would make a cool place for someones alias across it.Do some more ;D
-
Hello All,
I would like to thank everyone who posts on this forum, there is alot to be learned by reading it. Here is a picture of one of the slim jims I made for my R-M conversions. Thank again
-
Looks good, LCR. I've been considering making a pair of Slim Jims with a period correct design for my Remmies. I may have to get on the stick and get it done.
-
LCR, that's a nice looking holster. ;D Keep up the good work.
SR
-
Here's a couple I've done in the last year or two...
-
Nice, Dogface. I particularly like your knife sheath. Good accent with the beadwork.
-
Nice holster Kaboom! I like the point design on the cuff thingy.It would make a cool place for someones alias across it.Do some more ;D
TY GunClick Rick.................... ;D
-
Well, here's my latest - my 4th holster, this one was from a pattern I drew myself, looking at the cover of Packing Iron. I'm half proud of it and half embarrassed :-[ . I'm not yet able to carve like the example on the cover, and I didn't have all the stamps I needed to match another Meanea design, so I sort of improvised on the design. The end result is something I will definately wear with pride, though. The flower design is a replica of one I saw on spur straps in another book (I also made a pair of those spur straps, so I figured the design on the holster would match).
I did learn at least two things from this one...
1. It is much easier to tuck cardboard patterns into those skirt slots than thick pieces of leather.
2. Wear rubber gloves when wet moulding a dyed leather holster that is a very very tight fit pushing through those same slots, unless of course I want to have yellow hands for another week.
;D
-
These are the Spur Straps.
-
And finally - this is a shotgun/cartridge belt I made from a design I saw on the internet. This one is fully lined, the shotgun shell loops are stitched, the cartridge loops are laced (I couldn't get myself to hand stitch the cartridge loops, it was all I could take with the shot shell loops, the stop under them, and the entire perimiter of the belt).
Things I learned from this:
1. It is worth saving my money for a sewing machine.
2. See number 1.
This one came out very nice - the photos just don't do it justice.
So that's what I've been up to this past month or so. Now it's time to fine-tune the holster pattern, make the matching hoster for the other side of the belt, make another cartridge/money belt...;D
-
Good work, Dark Star. Nice rich look on the finished products. Good application of the earlier style carving on the holster. LOL, I've found that a sewing machine would be a good addition, too. ;D
-
my first twins
-
Lookin' good, Doc. You should be firmly hooked, now. :D When are you going to start another pair? I find that I make new ones now and then just because I get a fresh idea and want to try it.
-
thank you marshall will
starting belt next.....this is fun..lolol
-
...this is fun..lolol
You just summed up why most of us are doing leatherworking. ;D
-
another custom order that I am just finishing
(http://img5.ranchoweb.com/images/cavalrycommand/jodies1.jpg)
(http://img5.ranchoweb.com/images/cavalrycommand/jodies2.jpg)
Bobby Rose
CQMD
http://linkstrap.com (http://linkstrap.com)
http://cattailcreeksaddlery.tripod.com (http://cattailcreeksaddlery.tripod.com)
-
CQMD - that is truly beautiful.
-
What a great saddle. I like the dark accents and the % of tooling on it. Thanks for sharing that with us.
-
Wow, That saddle is incredible!!
My work doesn't quite compare to something like that but here's my latest sheath and knife combo:
(http://img236.imageshack.us/img236/2248/sheatha4yw.jpg)
[Deleted by moderator - Link Lost]
(http://img205.imageshack.us/img205/2999/eatman2z9ux.jpg)
Thanks for looking,
Scherm
-
Good design, Scherm. Looks like it'll hold the knife at a good height on your belt. I notice the left-hand design. Good touch, there, too.
-
Thanks Marshall, the left hand design is because this knife going to be worn in Grizzley country opposite a sidearm ;). Good eye.
-
Reckon I'll try to attach a couple of my recent holsters:
-
I like 'em, Dave. Especially the slim jim. Good holsters, pard.
-
I like them too..............................well done!!
-
Thanks, guys. Wish I could have gotten the photos larger, but couldn't get that part figured out.
-
What makes a knife sheath left handed?
I'm a righty and prefer my blade to have the cutting edge back on the left side, forward on the right. That way when I draw the knife, the cutting edge is up in either case.
Is that wrong?
-
Yes and you should be ashamed of yourself. That sounds like an evil fighting style. Now for the real answer, most sheath knives come from the factory with sheaths that place the cutting edge to the rear when worn on the right side. It would seem to follow that this would be considered normal for RH use by the industry. With custom sheaths you are not restrained by such rules.
-
I'm relieved to hear that, Bob. Lord knows I wouldn't want to be 'normal.' ;D
"Evil fighting style"?
My real fighting knife is a Gerber Mark II. 'Commando'...one of the old ones with a non-serrated DOUBLE EDGED blade that cuts every which way. Had one in 'Nam and gave it to my clerk when I left, figuring I could always get another one when I got home.
I was right, but it took 33 years to find the one I wanted.
I back that up with a Mark I. boot knife by Gerber.
-
http://s26.photobucket.com/albums/c129/c42r537c72f8/
Please feel free to ck out the 2 new rigs I just finished.
-
Good work in those items, pard. I like the touch you have with your tooling.
-
My first shoot is this weekend, so I've been busy getting my gear ready. As a long time hobbiest and sometime reseller of leather and Kydex knife sheaths I decided to make my own rig.
Here's a couple of pictures.
[Deleted by moderator - Links Lost]
-
The shiny accents sure set off the black nicely. I may have to make a black rig with nickel conchos and spots one of these days. Lookin' good, pard. ;)
-
Good looking out fit. But I don't see any stiching. Is the spots what holds it to gether?
-
Good looking out fit. But I don't see any stiching. Is the spots what holds it to gether?
Thanks guys.
No stitching on this one. The spots are black nickle Chicago screws with the back side out, the concho's are also Chicago style. The leather is first bonded with a high strength glue. Not traditional for sure but just as durable as stitches if not more so.
Unfortunately I only had about 2.5 weeks of occasional nights and weekends to get it done,so I went with a non stitched design. Now that I have this one out of the way I'll probably start on another one during the off season and take a little more time.
-
The leather is first bonded with a high strength glue. Not traditional for sure but just as durable as stitches if not more so.
I glued a firend's wallet that came apart after about five years of use. It lasted for another ten and he simply retired it because he wanted a new one.
-
Ain't this a sticky yet?
-
Hear is another pair for 60 army colts that I tried selling on e-bay. However, I was unsuccessful, so I am going to keep them and use them this year. Made them out of 9 to 10 oz cowhide and died them russet. Also, ended up basket-weave stamping the entire front.
-
Ain't this a sticky yet?
That's a good idea. It is, now.
-
Good holsters, Tommy. I like the color variations you got with the russet dye. They really have character.
-
Hi pards. I've been lurking here and trying to learn from you regulars about how to make holsters. So, I took a chance, and just hoped that my six gun would fit into my holster. So, here is my very first holster. I'm looking forward to my second holster, and am working on it right now..
-
Looks like a perfect fit, Trapper. Good work. I guess this makes you one of the regulars, too. ;)
-
Thanx Marshal!
Regards, Beaumont
-
Great holster pard!!! You'll do well for yourself. Welcome to the board.
-
E.R....
And trhe color variation is showing up in the basket-weave in the close-up picture. I like the conchos too.
-
Looky what Triggersmith just made.... for a Richard & Mason Conversion
[Deleted by moderator - Link Lost]
He matched another of his I bought for the 1860 Army R&D .
-
Looky what Triggersmith just made.... for a Richard & Mason Conversion
He matched another of his I bought for the 1860 Army R&D .
I like it. Great holster, there. With all these cool-looking brown holsters showing up, I may have to make another brown rig for my pistolas. ;D Of course, I may need another black one, too. Heck, there aren't enough hides to make all the holsters I want. :D
-
Ya'll have been doin' some real nice work. I ain't had the time recently to git anything done, but your work is sure inspiring ;D
-
OK, that does it!!! I'm gonna have to order some leather when I get my Friday special from Siegels. That's a great holster.
-
Here is the mate to the above holster, The concho is removed though,
[Deleted by moderator - Link Lost]
I have no dog in the fight, but
give Triggersmith a try ... You won't be sorry
bluesman@acd.net
-
I have always liked that style of basketweave that Triggersmith used. I bought that stamp not to long ago and just need to try it. The holsters look great Major. Did Triggersmith put a welt in them on the seam? The edge looks nice and thick.
-
Yes, the pattern is his , the welt idea was mine, to allow for more scroug for the side ejector of the Richard & Mason and still be his Slim Jim shape. It is also lined.
He also came up with a idea (not used in my holster) for a welt that allows for the scroug, but does not make the visible side of the main seam that much thicker....My holster is just as I asked for to match the first crossdraw.
It's his trick and looks real good too.
Ray also has a real nice Floral .
[Deleted by moderator - Link lost, photo moved or deleted]
& he's has done a half basket/ half Floral pattern
[Deleted by moderator - Link lost, photo moved or deleted]
I've done my leatherwork and know quality, Compaired to him I'm a hack .
-
here is some of mine.... See what I mean ?
[Deleted by moderator - Links lost, photos moved or deleted]
-
Major, I know what you mean. Tiggersmith makes good stuff.
-
I finally found a napkin ring (at the suggestion of Major 231) I thought would look nice on my Walker flapped holster. I found it a yard sale. It is engraved silver. You find the best things when you aren't really looking.
Triggersmith
-
What did you do to secure it to the holster?
-
I slid the ring on the tube. I used a strip of 4 oz loop leather, used Barge cement on both sides, rolled it into a tight unit, the outer diameter was 1/4 inch larger the the diameter of the ring. It was about one inch thick. 1/2 inch was groung down to fit into the tube. This was glued into the tube. The remaining 1/2 inch was ground to match the silver ring rounded off a bit and dyed black. The area where I had slid the ring back was coated with Barge cement, before it dried. I slid the ring back snug up against the plug, rotated it a big to coat the inside of the ring, and let it dry. The ring is silver and I used a rubber hammer to peen in the area around the seam in the back. It came out pretty good.
Thanks for asking.
Triggersmith
-
...."pretty good"....
Huh! So you're a master of understatement, too. It came out great.
-
Much obliged Forty Rod but you can thank Major 231. It was his idea to hunt for a napkin
ring. I just found one I liked.
Triggersmith
-
Outstanding. The napkin ring really is a good addition. Thanks for posting the pics. It really gives it the look of the pommel holsters.
-
Something new from the shop...
(http://i78.photobucket.com/albums/j99/reverendbob/guns003.jpg)
Reverend Bob
-
Hey Bob, is that the rig that's on sale at Cowboys-be us. It looks like you have been talking lessons. Your work has gotten really great. Nice job.
Your Pard
Triggersmith
-
Triggersmith
Thanks for the compliment, here's another rig I thought came out pretty well.
(http://i78.photobucket.com/albums/j99/reverendbob/doublerig.jpg)
Reverend Bob
-
Those are great rigs, Bob. I particularly like your color choices. What did you use on the double rig, a heavy dose of light brown?
-
No that is Tandy's antique burgandy.
-
Mosquito Whitey asked me to post the photos of his new knife sheath I made for him. He has a beautiful knife and needed a nice sheath to go with it. It turned out quite nice and he is happy.
Triggersmith
-
;D
Triggersmith;
Thanks so much for the sheath.... I love it!!!!!
-
It was indeed my pleasure. That is a beautiful knife. It was great to do business with you Whitey.
Triggersmith
-
No that is Tandy's antique burgandy.
Thanks, pard.
;D
Triggersmith;
Thanks so much for the sheath.... I love it!!!!!
It's easy to see why. It really looks good. Nice work, TS.
-
I found these today in the trash pile. Not near the quality of the Triggersmith's stuff but I thought I would post it anyway.
(http://i78.photobucket.com/albums/j99/reverendbob/004_4.jpg)
Reverend Bob
-
They look fine to me. I wouldn't have thought of the belt around the wrist end. Nice touch.
-
Spaghetti Western Quick Draw Holster
(http://i78.photobucket.com/albums/j99/reverendbob/015_15.jpg)
7 1/2" Single Loop Holster
[Deleted by moderator - Link lost, photo moved or deleted]
Reverend Bob
-
Bob, you're really goin' to town. Nice stuff. Thanks for the pics.
-
Bob, did you use a commercial or shareware type pattern? I like em both, can you share the details, or email me with them?
-
Bob, these are really good. I want the pattens if they are available. Or at least some guidelines.
-
Howdy Pards and Pardettes.
Trapper, Pard half of the fun is making your own patterns. I don't know but there might be a "How to" post up on the top of the index. If there isn't one, start one by asking how to do it. I will put money down you will get a bunch of posts telling you how that pard does it. And some of our Pards here are Pros, and do this for a liveing.
That is all I think I know.
Regards, Beaumont
-
I finally found a napkin ring (at the suggestion of Major 231) I thought would look nice on my Walker flapped holster. I found it a yard sale. It is engraved silver. You find the best things when you aren't really looking.
Triggersmith
That looks FANTASTIC!!!
-
First 'real' attempt at making a holster for myself. I wanted to try and do some stamping. Miffed up the basketweave a little, but, not overly noticable.
9oz leather, mexican double loop, for a Taurus Gaucho / Colt SAA clone.
Moulded onto a Gaucho.
[Dead link removed by moderator]
-
Great first holster, pard. I like the Mexican double loop holsters. Congrats.
-
First 'real' attempt at making a holster for myself. I wanted to try and do some stamping. Miffed up the basketweave a little, but, not overly noticable.
9oz leather, mexican double loop, for a Taurus Gaucho / Colt SAA clone.
Moulded onto a Gaucho.
[Deleted by moderator - Link lost, photo moved or deleted]
Nice job
A tip if you get one of those star rollers ( looks like a spur on a handle) to match youe stiches per inch it will flatten out the seams and make it look like the stiching grew there.
Cheers
Pawnee Bill
-
Thanks for the tip.
I use one of the stitching wheels to mark out the spacing for my stitching. I have tried (not on this one) to use it after I have stitched to push the stitching into the leather more, but, I just dont seem to have the knack as yet.
One step at a time, thanks again, all hints and tips are greatly appreciated.
Now that these holsters have dried out completely and the 'moulding' has taken, I was wondering about an 'oil finish'. Since these are a suprise for my wifey, and she is currently on a plane back home, I was looking around for something that I 'had around the house'.
Hmm thought I, I have a couple of bottles of peanut oil left from making lube. I tried this on piece of scrap and am real pleased with the finish..
So.. These are now my Peanut Brand holsters... grin
-
Nice holster pard--
peanut oil -- hmmm never though of that. Although I have experimented with regular "virgin olive oil" on scraps, but never applied it to the final holster stage.
-
This is my second holster, and first attempt at carving. It gets easier and better each try thanks to information like this forum.
Trapper
PS My apologies...if I may have double posted.
-
This one I made for Eot '04 Sass Scholarship raffle. I work part time for John Bianchi. It's his outfits makers mark on the holster loop.
I have been browsing this section and looking at all the very fine looking holsters and other leather craft you pards are creating. It almost makes me want to give up before I get a good start!!! :) :) :)
But I'm not...heheh
-
Mexican Single Loop Holster & Matching Money Belt
(http://i78.photobucket.com/albums/j99/reverendbob/009_9.jpg)
Reverend Bob
-
I'd like to have a money belt. Better yet, I'd like to have some money to put in it. You usual great work Your Revness
Triggersmith
-
Howdy Pards and Pardettes.
Trapper, Pard the holsters you see are the good ones, we don't post Pictures of the ugly ones. We all have a first holster, some of us may even still have them, but I'll bet $ to doughknots they don't look like the ones they post pictures of. The rare exceptions seem to be the Pards on this board who have taken the plunge.
I have been pleasently supprised by the quality of the first holsters put up for view here. I think that part of that is that there is so much truely Professional help available. Part of that help comes from folks that are "only amatures". Thats cause they like their other job better, or some such.
My first holsters were made from old boot tops and a latago boot lace. My first try at basketweave looked like a drunken seagull had stomped across the leather. I'v gotten better with boarder stamping but that took some work. Staying between the lines is booring. And I won't even talk about carving for a while.
That is all I think I know.
Regards, Beaumont
-
I've been out of state for a few days. I see a few new holsters to look at. Good work again. I like the black money belt, Rev.
My first try at basketweave looked like a drunken seagull had stomped across the leather.
:D :D :D
I think that seagull came by here when I did it the first time, too. ;D
-
Just finished and tried out my new rig. Fell in love with the money belt on the cover of Packing Iron. Tried rawhide lacing , went with wide billets to keep the leather from pulling and stretching. Can't believe how comfortable the belt is. Added some Turquoise rivits for flair? Holsters are 12-14oz leather, should last forever. Wanted 1880's-90's. RR
[Deleted by moderator - Links lost, photos moved or deleted]
-
Looks good, Ralph. I agree with you on the lacing. Nice touch with the turquoise spots, too. Thanks for the pics.
-
Slim Jim
(http://i78.photobucket.com/albums/j99/reverendbob/001_1.jpg)
Reverend Bob
-
Ralf, very nice looking belt and holsters. ;D I really like the money belt style too, a lot more comfortable than regular belt. I also find the money belt stays in place better.
Nice decrative touches on the belt.
SR
-
That's a clean holster, Bob. What is the stamp you used on the border? Looks good.
-
Marshall
I used a flower,mulefoot and a small seeder for the border tools.
Reverend Bob
-
Indian Beaded Full Skirt Single Loop
(http://i78.photobucket.com/albums/j99/reverendbob/025_25.jpg)
Reverend Bob
-
Thanks, Bob. Sometimes the simple tools make the nicest borders.
Nice holster, too. The beadwork looks good. I wouldn't have thought of putting something like that on the loop.
-
Now, that gives me an idea, Rev. Thanks.
BTW, that rig looks great.
-
Hey Fellows
The beads are a inventory item at Tandy. Nothing of my own manufacture. They are designed to go on the toe of their moccoassin kits. These were probably made by an 8 year old in China come to think of it. My kids think they have it hard?
Reverend Bob
-
Okay, after about a month of finishing my part, I finally get to post pix of my first two gunbelts and holsters. Hate to put 'em up here because you guys are so damned talented, I feel like a 10-year-old kid on a stick horse talking to the champion bronc riders at the Fourth of July rodeo :-[
The three pics of the big wide one show Absinthe Annie Duke's (my better half) new 1890s "bronc belt" gunbelt. I made the belt and holsters, died them, put them together, and punched about a zillion holes because she wanted the Mexican braid ALL THE WAY AROUND this belt! It took her right at a month of fitting in five minutes at a time of braiding. But it came out beautiful. She had intended to do some stamping on the back, but the leather would NOT take it (had a whole side, but it wasn't tooling leather--waya too hard????). So now we're looking for a 3- or 4-inch silver fairy for the back (absinthe was known as the Green Fairy, and she's planning on wearing a lot of green, too). We tie the holsters on with thongs so that she can take them off and wear the belt by itself. Had trouble with figuring out spacing on buckles, conchos, etc.
The other is my 4-inch plain gunbelt and crossdraw holster (first one ever!). Had no thread, sinew, or lacing when I made it, so I just riveted the whole darn holster (I know, I was in too big of a hurry to see if it actually worked). Need to cut an inch or so off the straps so all four diamond conchos show on the side by the holster. Since then, we've made two holsters and belts for our boys (Deadeye Didley and Waddie Bearp).
(http://i43.photobucket.com/albums/e368/GeorgeWilhite/100_2053.jpg)
(http://i43.photobucket.com/albums/e368/GeorgeWilhite/100_2050.jpg)
(http://i43.photobucket.com/albums/e368/GeorgeWilhite/100_2047.jpg)
(http://i43.photobucket.com/albums/e368/GeorgeWilhite/100_2046.jpg)
-
Dr Wright,
Looking at the pictures I do not think that you are rideing a stick horse, I think that you are up there with the rest of the riders. Nice work on those holsters and belts.
Old Top
-
I made the belt and holsters, died them, put them together, and punched about a zillion holes because she wanted the Mexican braid ALL THE WAY AROUND this belt! It took her right at a month of fitting in five minutes at a time of braiding. But it came out beautiful.
LOL, I try to avoid lacing for just this reason. It sure adds a fullness to the edges you wouldn't otherwise have, though.
Both rigs look good. The double buckles work nicely on wide belts. I've made holsters with rivets when it's called for. That is a look of its own. Be sure to post photos when you make more stuff. We all get ideas from each other here. Thanks for the photos.
-
Hey Doc
That double rig with the lace edges is spectacular.....
Reverend Bob
-
Dang-0-Mighty !!! That is totally bueawtamuss!!! ssshhhwwweeetttt!!!!!
-
Indian Beaded Full Skirt Single Loop
(http://i78.photobucket.com/albums/j99/reverendbob/025_25.jpg)
Reverend Bob
Do ya sell these? This is gorgeous!
-
Here are some pictures of some of the things I've made.
http://i1.tinypic.com/1zqfwc1.jpg
http://i2.tinypic.com/1zqg178.jpg
http://i6.tinypic.com/1zqg26a.jpg
http://i6.tinypic.com/1zqg50o.jpg
http://i1.tinypic.com/1zqpna1.jpg
http://i1.tinypic.com/1zqg7j5.jpg
http://i6.tinypic.com/1zqgeic.jpg
http://tinypic.com/wmnvxd
http://tinypic.com/wmnw9k
http://tinypic.com/view/?pic=qs47kj
http://tinypic.com/view/?pic=qs421g
http://tinypic.com/view/?pic=qs45kw
http://tinypic.com/view/?pic=qs44d5
http://tinypic.com/view/?pic=qs8w12
http://tinypic.com/view/?pic=qmyq6u
http://tinypic.com/view/?pic=qmypmx
http://tinypic.com/view/?pic=qmynaf
http://tinypic.com/view/?pic=qmyp29
http://i5.tinypic.com/20jr4pe.jpg
http://i5.tinypic.com/20jr79u.jpg
Buff
-
Nice work, Buffalo. I really like the black on the saddles. It makes a nice contrast for a striking finished piece.
-
Thanks, but it is actually dark chocolate brown.
Buff
-
Hi all. Here is my latest creation. I work mainly in black, so it is kinda hard to see all of the work. :( Anyway, this is the new holster for my CAS. I'm finishing a left had rig now. I used an alcohol-based dye and wet molded the holster to the Vaq. Next time, I'll try an old-based dye and see if I can get it to soften-up a bit. I just received my Chuck Burrows video and will be trying do duplicate his techniques.
Thanks All!
Uncle Chan
-
Looks good, to me. Nice simple design. It'll look good with a mate. Be sure to show us the pair of them when you finish. ;)
-
Hi all. Just finished the second one. What do you think?
Uncle Chan
-
Last two pics:
U.C.
-
Now you're talking. The slimjims make a good looking set. Those should do well.
-
Thank you Marshal. Appreciate the encouragement!
U.C.
-
Hi folks. Here is a photo of the Single Six Rig.
-
Ah! Finally, it worked. Okay, here's another one. This is my Callahan Lightning.
-
Brazos, I like the Single Six but the one that has intrigued me is your Texas Slim. The Texas Slim looks to be a real good design for the pards who like Duke Holsters, cut the skirt back to a half design and presto. I'll let you know how it works the next time I place an order through Hidecrafters and get some patterns for it. Hmmm, been lookin fer an excuse to make a ruff-out money belt anyhows!
-
Slowhand,
By all means MODIFY that rascal!! A feller ought to customize a pattern to his liking. Just look what the Sassparilla Kid did with the Texadero Holsters! (That's Hardpan's young'un.) Cool holsters, eh?
-
Just so the folks know, this is the Texas Slim. Named for a SASS Shooter of the same Alias. (He's the one I designed the original pattern for.)
-
Howdy, Pards,
Go to www.gunfighter.com/trailrider to see my stuff! Ride easy, but stay alert!
-
Nice work, pards.
Thanks for the photos, Brazos. Your Texas Slim does have that Duke look. Nice touch with the accented borders. You do that with an airbrush?
Thanks for the link, Trailrider. I'm particularly like your Cheyenne model. The double-loop Cheyenne holster design is my favorite all time holster.
-
Thanks Marshall. The Scallops on the holsters are done with a small wool dauber and the rest is done with a 3" diameter sheep shealing applicator. Listen up folks "Fiebing's Oil Dye!" It's the only way to go.
Oh, and being as you like Cheyennes . . . here's one with the toe plug and all!
-
I'm always impressed by the fine work you pards do. ;D Very professional looking.
SR
-
Oh, and being as you like Cheyennes . . . here's one with the toe plug and all!
Looks good. Thanks. ;)
-
Slim Jim for my niece's 1851.
-
Looks good, Unc. Is that a toe plug sewn in? Toe plugs are a nice touch.
-
Here's one for ya. Peso Bill recently asked me to make a couple of boot Holsters for his Baby Remington. Well, I coulcn't help myself . . . I had to play a little. So, I made a Cheyenne Mexican Loop for the Baby Remmie. Overall length: 6 3/4"
Enjoy!
-
Cute. I like it. I can't say I'd have thought of doing that. ;D
-
I don't get out much, Marshall. I even made a Gun Belt for my Sidekick, Igor D. Coyote. His Un-official SASS Alias is Bad O. Coyote.
-
Jack, that rig for coy dog is really neat.
SR
-
That's way too cool, Jack. ;)
-
BJ...........
;D ;D I`m ON THE FLOOR pard!! ;D ;D
Bloody Brill!!
Paladin (Whats Still laughin!! :D) UK
-
Marshall:
I have attempted several times to add photos of my leatherwork, however it always tells me that the file is too large. Is there a way to make the file smaller so I can post some pics?
-
I have attempted several times to add photos of my leatherwork, however it always tells me that the file is too large. Is there a way to make the file smaller so I can post some pics?
I sent you an emule, pard. Let me know what you think.
-
Attached are pictures of a cover I made for the butt of my stoeger Coach Gun.
There is a rubber pad inserted inserted to serve as a sort of recoil pad. I have not fired this gun yet with the pad so I'm not sure how effective it will be.
-
Looks good, pard. You can always put a little closed cell foam under it if it needs a little more coushioning.
-
Hello Marshal,
Thanks for the tip. I will let you know what I finally end up with for an inner recoil pad.
This was my first attempt in making something like this. I should be able to improve future versions with what I've learned on this one.
I have a Taylor's Richards-Mason 1851 Navy in .38 Special on the way to me. I cant wait to make a holster and belt for it. "Packing Iron" has been a great resource for ideas for this upcoming project..
-
Johnny, butt cover looks good. Need to make something like this myself. I shoot my shotgun from the hip and the steel butt plate beats the grips up on my holstered pistol. The shotgun butt stock also gets dinged by the pistol. Butt cover would help.
You'll have fun making the holster.
SR
-
Hello SR,
Thanks for your comments. As soon as I shoot it, I'll let you know how effective the pad is and what I finally end up with for an inner pad. As Marshal Will said, some closed cell foam may help.
Attached is a picture of a holster I just finished for a friend.
-
Nice looking holster Johnny. Keep up the good work.
SR
-
Well, all, here's the finale, my first cartridge belt. I used a base belt of black and a tongue, keeps, cartridge loops, etc. in brown. I like the contrast.
The first three pictures show the finished product with my rugers. I think the make a decent set. I might want to redo the holsters though with something that fit a bit looser.
I used the weave method to make the loops. I'll keep with this style. Learned a lot (thanks Marshall and Trailrider). Next time, a more solid surface, lighter weight leather, and closer cuts with the oblong punch.
The tongue is held in place by three ebony screwbacks. I choose to do this because for some bizarre reason, my belts (and pants, etc) keep shrinking on me. I punched holes all of the way through the tongue and belt and as my girth grows, all I'll have to do is unscrew the tongue and move it up a bit.
I chose a simple design pattern for the stamping, floral-ish. I've learned that I'm not carver and so the simpler the pattern, the better for me.
Anyway, thanks for all of the advice. I GREATLY appreciate it. Let me know what you think. I couldn't of done it without you all.
Uncle Chan
-
more pics.
-
last pics of tongue and stamping. :)
-
Good work, Unc. I like simple designs, too. I have done full tooled ones but the simpler designs seem to hold up better visually. The contrast is good, too. With the simple border stamping, it makes the rig look more elegant.
-
Great Job. Always wanted to get into leather work,but guess I had too many other things to do. Keep up the good work Pard. Happy Trail and God Bless.
-
This is a rig I just finished for myself. The strong side is for an 1873 Cimarron SA and the cross-draw is for an 1851 RM Navy. Both holsters and the belt are lined.
-
Nice rig, JM. I like the way you made them look the same although for different pistols. Well done.
-
It was Zeb's Birthday, (at least that was the scuttlebutt.) Boy is he gonna be surprised!
-
Nice. The picture shows on my screen as an oxblood color. I like it a lot. Good work.
-
comments/ critisizm is welcome
-
Nice rig. Looks well planned and made.
-
Nice, smooth lines without the skirt. Looks good. Thumbs up. ;)
-
my first carving project
-
That should give you a good sense of accomplishment. Now you're hooked. :D Your cut lines look even and smooth. Good job. Be sure to post any more you do.
-
Howdy. Heres a few of mine. Started a year or two ago, and have been learning as I go. DM
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/MVC-068F.jpg?t=1173335314)
Cimarron Model P Jrs
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/MVC-080F.jpg?t=1173335378)
Starr revolver
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/MVC-069F.jpg?t=1173335412)
1860 and my DD knife
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/MVC-072F.jpg?t=1173335456)
Walker
(http://i87.photobucket.com/albums/k123/daltonmasterson/Starr%20Revolvers/IMG_0547.jpg?)
Pair for Starr-not finished, kind of a work in progress bad planning sort of thing. :-\
-
A few more non CAS-
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_0538.jpg?t=1173336027)
Ruger 22/45
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_0145.jpg?t=1173336055)
Old Astra Hope-Holster for a gun that dont work, lol.
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/MVC-373F.jpg?t=1173336111)
Ruger Single Six
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_0543.jpg?t=1173336156)
Ruger Govt Target
Thanks for looking. DM
-
Nice work, Dalton. Everything looked even and clean. I particularly liked the period design on the Star holsters. Did you do that with a swivel knife?
Thanks for sharing with us. Great pics.
-
Yes, that was swivel knife work. I had to redegn/resize the Will Ghormley pattern to fit on the Starrs due to size.
-
Yes, that was swivel knife work. I had to redegn/resize the Will Ghormley pattern to fit on the Starrs due to size.
I thought so. It looks good. I've been thinking about doing one that way one of these days.
-
I built the rear portion by the triggerguard too long, it almost hit the grips! Had to trim after they were stitched, so they are kinda prototype. They draw nice tho. Gonna give em a workout this sunday. DM
-
I built the rear portion by the triggerguard too long, it almost hit the grips! Had to trim after they were stitched, so they are kinda prototype. They draw nice tho. Gonna give em a workout this sunday. DM
They look fine. When I make a new pattern, I like to make one test holster with scrap leather from the belly part of a hide. That way I can adjust the pattern if needed (quite often) and I also end up with a holster I can use for some purpose or give to someone who really needs one. I've been using a pair of holsters for about two years that were test holsters because I didn't really like them too much but didn't know exactly what I wanted to make. My recent one I posted will be the pattern I'll use (with a couple changes) and the other ones will get stashed away.
-
Attached are two I've just finished.
The Black holster is for a friend's Schofield with a 3-1/2" barrel. It's styled after the Shane holster as shown in Guns of the West #52 and has a slight angle for a cross draw.
The Tan holster is for my 1872 Army Open Top.
-
Nice holsters, pard. Those little schofields sure don't use much leather compared to the open top, do they? Thanks for posting the pics. I haven't seen a three-loop holster for an open top before. It looks good, the slenderness really works.
-
Howdy all:
This is a test post..Here is a rig that I recently made. The inlays are eastern diamondback
-
Very nice!!! DM
-
Very tastefully done. I like the contrasting colors. The light lace really adds a good accent. Nice work.
-
heres my first 4 leather projects (http://thumb8.webshots.net/t/53/553/4/43/21/2034443210083293448tjicCU_th.jpg) (http://home-and-garden.webshots.com/photo/2034443210083293448tjicCU)
-
Lookin' good, Harpman. Nice to see more than one, too. Keep at it. Looking forward to seeing the next piece.
-
got her done !
(http://thumb8.webshots.net/t/59/659/5/2/49/2615502490083293448roTxUT_th.jpg) (http://home-and-garden.webshots.com/photo/2615502490083293448roTxUT)
-
That's great, H-man. Nice way to lower the holster by putting the curve in the belt. I do that slightly with mine but usually only to get to the point they will eventually be with time. Nice work.
-
Thanks Marshal.....I really like it like that too, it sits perfect, not up on the hip, but not to low for discomfort, If I slide the whole belt just a tad forward towards my front leg and stand with body twisted to the right just a little bit, it makes for a really fast draw....fun stuff, I'm already working on another one, probly make it much like this one, then after it go for another design.
-
I don't know how to post no picture, but I can give you a link to the rig I made for Russell Crowe in the re-make of "3:10 to Yuma". http://www.willghormley-maker.com/310toYuma.html
Will
-
That's great, Will. The link is good, I liked reading about it. You sure did get the proper effect. Thanks for sharing.
-
Great work as always Will. I have to say, I love your patterns, but how bout a nice shoulder rig? DM
-
Isn't a good shoulder rig an oxymoron? I made a double shoulder rig for Peter Fonda to wear in "3:10 to Yuma", but I hated it so much I never sent it to New Mexico! I've never wore a sholder rig I liked, except for the modified "Tankers" rig I carried my 1911 in, and that wasn't really cowboy. Oh well. If I can come up with something I like, and TLF will buy enough patterns to make it worth printing, I'll come out with one. But, until then, I'd rather do nuthin' than do somthin' slip-shod.
Will
-
True, I cant seem to make the ones I have made very comfy to wear long, and I always fidget with them. Just in love with the look I think. I have toyed with the idea of modifying my father inlaws 1911 rig for cowboy, but havent gotten too serious about it.
I just like the look of a 51 colt snubby tucked under a vest. DM
-
Here is a rig I just finished for myself. The Cross-Draw is for my 1851 RM Navy Colt and the Strong-Side is for my 1872 Army Open-top.
My edges and finishing are improving thanks to the tips received on this forum and the Wild Rose Holster Video.
-
Nice rig, Johnny. Those holsters look good. Nice work on the edges.
-
Keep posting your pictures of new leatherwork, pards. The discussion on shoulder holsters is a good one so I split it off into its own thread. Let's keep it going. Here's the link: http://www.cascity.com/forumhall/index.php/topic,15177.new.html#new (http://www.cascity.com/forumhall/index.php/topic,15177.new.html#new)
-
Lots of nice work here!! I finished this one the other night, and find it to be a very useful design for totin one of my favorite guns. For concealed carry, I usually use a Mernickle design, but this one serves a need in the field. I borrowed liberally from the Threepersons and Lawrence 120 designs. This picture isn't great, but I'm inept!!
(http://i169.photobucket.com/albums/u214/sgtsash/t3p.jpg)
-
Looks good, pard. I like the partial patterning on it. Nice touch to wrap the liner around the edge the way you did. Thanks for the pic.
I find my camera makes fuzzy photos when I'm too close to the subject. I have to back up and zoom in a little to get a clear pic.
-
Howdy folks! Another pattern hot off the press! This is my new Callahan Lightning Holster. This rascal is so fast it almost scares me . . . . . . almost!
Thanks as always.
Brazos Jack
-
That's a good holster. I like the way it catches the front of the trigger guard but is still open and easy to grab your pistol, much like some of the holsters in the 1800's. Thanks for the pic.
-
Thanks Marshal, these are designed with safety in mind so one does not need to grab the pistols everytime they move. Even with zero retention, you would just about have to be laying down for the pistol to fall out.
-
Thats a great looking holster Brazos, now I see where you been hiding. I just posted elsewhere about the fact that I dropped an empty pistol at a recent match. Was trying to carry a pair of Schofields in those blasted style bucket holsters. It has me thinking I will not make any more, as a poor design is no design and if its not safe I shouldn't promote its use to others. When will the new pattern be on the shelves?
Lincoln County, I really like the design for a field and personal carry holster. My guess would be that the rolled over liner will offer stability and stiffness at the mouth to prevent any tendency towards loss of shape. If you do not mind, what is the total weight of the combined leather with liner on this one.
-
I still haven't figured out how to post photos on this sight yet. I hit the photo icon on the "post reply" page, and it doesn't let me just copy and paste photos from somewhere else. Oh well...old dogs and new tricks and all...
So, I had to wait until I had the web-page up and runnin' for my latest bit of leather craft. If you'd like to see it, and read a little bit of history on the last of the "cattle drive" inspired stock saddles, the link is:
http://www.willghormley-maker.com/1890saddle.html
Will
-
That was a great write-up, Will. I really like reading about the way saddles and such were made in the 1800's. Thanks for posting the link.
There is a thread somewhere that describes how to insert photos. I'll see if I can find it and post a link for you. In this instance, the link was better anyway but it will be nice to know how to post a picture at times.
Later:00 OK, it's the thread on "Posting Photos" and you can always get to it by using the link in the "How-To FAQ" thread.
-
Thats a great looking holster Brazos, now I see where you been hiding. I just posted elsewhere about the fact that I dropped an empty pistol at a recent match. Was trying to carry a pair of Schofields in those blasted style bucket holsters. It has me thinking I will not make any more, as a poor design is no design and if its not safe I shouldn't promote its use to others. When will the new pattern be on the shelves?
Lincoln County, I really like the design for a field and personal carry holster. My guess would be that the rolled over liner will offer stability and stiffness at the mouth to prevent any tendency towards loss of shape. If you do not mind, what is the total weight of the combined leather with liner on this one.
Slowhand,
In answer to you question; As of last week.
Until things get settled with my distributer in Fort Worth, all my new stuff is only available from the Web Site.
Thanks Pard
-
Heres my newest projects. Made these lined holsters for my wife's Cimarron Model P Jrs. Workin on the matching belt yet. These were the subject of my spot setting question previously. Once the belt is finished, will use an antique to highlight the detail.
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_1041.jpg)
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_1042.jpg)
They were a lot of fun to build, and was almost tempted to grab the Adler machine and start machine stitching. Cant bring myself to do that yet. DM
-
Heres another project, courtesy of Mr. Ghormley.
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_1043.jpg)
(http://i87.photobucket.com/albums/k123/daltonmasterson/Leather/IMG_1044.jpg)
Gotta finish the edges yet, but figured I would post them while I am posting others.
-
They were a lot of fun to build,
Isn't that the truth. Those look good, pard. Nice contrast between the lining and the outer color, too. I take it that the second pair is made from one of Will's patterns. Be sure to post pics of them finished.
-
They both look great. Have you carved leather before?
-
I have carved a few holsters, but these are the best I have done yet. Not perfect when I look at them, but good 10 footers, lol. DM
-
Not perfect when I look at them, but good 10 footers, lol. DM
LOL, I have yet to make anything that I'm completely satisfied with. My new holsters that haven't even been assembled yet have a thing or two I'll change next time. It's just the way it is. Now, good enough, that's another matter. If it's good enough, I'll put my mark on it and say it's my work. If not, I toss it and start over.
-
I am impressed with all the talent out there.I am wanting to put pics on and found the Marshalls post on how to do it .So now I just have to figure out the camera.
If anyone is interested the only magazine to my knowledge is The Leather crafters and saddlers journal,331Annette ct. Rhinelander,WI 54501. leathercraftersjournal.com is the website.Lot's of leather crafting info and suppliers.Also every month has patterns for doing leather projects of different types.
Period patterns can be found from different suppliers catalogs and elsewhere.
-
Howdy again folks,
Got a couple Oldies but Goodies I want to share with you. Now who can say that these ain't True Old West?
Enjoy.
-
For someone who is a destroyer of pocket-watch crystals, or who has ever had a pocket-watch come open in your pocket, here's a really simple little case that will only take you about 20 minutes to make out of light leather. This is meant for those who are going to carry the watch in a pocket.
It is simple an elongated rectangle of leather with a big hole cut in it for the winder and chain to come out. I made a pattern of paper so that it fit snugly but not too tight around my watch. There are no fasteners of any kind, just four stitches on each side. This is about the simplest possible thing to make, but it builds confidence in your cutting and stitching abilities if you haven't done any leather-work before. These also make nice little gifts for friends who carry pocket watches. If I was going to give a pocket-watch to a Pard as a gift, I'd certainly make one to throw in the box.
I'm in the process of making more little things, like a cell-phone cover that doesn't look like one. As soon as I decide on a fastener for it, I'll photograph it and add that, too.
I'm slowly working on a pair of saddle-bags, made from really crummy but heavy-duty leather that I'm salvaging. For $15 for a side, I figured that I would chance it! I think that this leather was intended for shoe soles or something. It is as hard as a rock. I already made a very durable strong-side holster and gunbelt out of it for practice with my "replica" 1858 Colt. I'm playing with a mix of warm "Virgin" and "Extra Virgin" olive oil to soften it up. I am hoping that I'll have enough of it left to make a rifle scabbard out of it, too.
We are out of the country, so cheap leather is available, but I have never found any vegetable tanned, so I have to "make due."
-
Nice idea C.E.!! Make sure ya post some more pics of stuff when you get it done!
I have had some leather like yours, that was too hard to do much with. I ended up using it for stamping practice. Even wet it hardly stamped. Terrible stuff. DM
-
Lincoln County, I really like the design for a field and personal carry holster. My guess would be that the rolled over liner will offer stability and stiffness at the mouth to prevent any tendency towards loss of shape. If you do not mind, what is the total weight of the combined leather with liner on this one.
Sorry it has taken so long to get back to you. Thanks for the compliment, and you're right about the holster mouth. The total weight with the liner is around 12 oz. That is a rough guess based on my limited experience. The holster seems to be holding up well, though.
-
Good idea, Edd. I like it. Now I have an excuse to get a pocket watch.
-
Hey, Pards,
Here's another simple project that took me about 30 minutes to produce. I didn't have a straight-edge, just a piece of scrap leather and my little "housewife" sewing kit. If you are not familiar with that, I'll lay it out, photograph it, and you can see what it contains. It is "historically accurate" for a soldier, cowboy, or single person during the period from 1700-1900, and even now!
When I put this together, I was sitting outside in sweltering heat in a little country town in central Azerbaijan. The air was still and the sweat was heavy. It was starting to get dark and there was no outside lighting to speak of, so I needed to work fast. After I got it finished, the sun was down and the breeze from the mountains started up. No such thing as air-conditioning out there. (Or indoor plumbing or water year-round or electricity 24-hours per day, but the gas is pretty good.) When the weather is hot, folks move their kitchens outside. Not a big deal except for getting the refrigerator and range down the stone steps. People traditionally usually live well above ground level out there, as you can never tell if and when the river will flood and how high it might get. (Enough of the culture and weather already!!)
I used two pieces of leather for this one. One is the "pocket" if you want to call it that, and the other is the cover and belt-loop. If I had been thinking better, I would have had a one-piece pocket/cover and a separate belt loop. Sometimes the cell phone hangs up on the inside edge of the pocket when I put it back. If I had used one piece, that problem would have been eliminated! (Better luck next time). I found a little "barrel button" made of wood, with a swiveling brass "eye" as a fastener. As I didn't have a slot cutter with me, I used my pen knife to cut the button-hole. Not the best thing, but it worked just fine. I figure my cowboy counterpart in the 1870's would have made his cell-phone case about the same way! ::)
Next: The "Housewife." After that, "Telescope Case."
-
There ya go, Edd. Looks like it should do the job. You have a CSA cell phone to go with it? I hear those are worth a lot these days. ;D
-
LOL, I have yet to make anything that I'm completely satisfied with. My new holsters that haven't even been assembled yet have a thing or two I'll change next time. It's just the way it is. Now, good enough, that's another matter. If it's good enough, I'll put my mark on it and say it's my work. If not, I toss it and start over.
Thought I was the the only person who felt this way about my work. I usually see some improvement with each new project but I always seem to be on a quest for the perfect holster.
-
Howdy All:
Here is a few pics of a new gun rig I just finished for a new SASS shooter.
-
Nice rig, Outrider. You even included a loading stirp to match. Good idea. I notice the shotgun slide extends down a distance below the shotshells. Is that to keep the slide stable?
-
A good looking competitiion rig. Marshall, a close look will reveal that the loops or pockets are located up real high to place the shells above belt line for quick access. Though attractive, I would say this rig is mostly about competition.
-
Howdy Pards:
Marshal..the shotgun slide is large enough to go onto a 3 inch ranger style belt and the double loops are so that the shooter can retrieve 2 shells at a time. Alot of the SASS shooters are using this style with the double loops.
Slowhand...you are correct the holsters are styled towards competition. Although not my style this is what the customer wanted.
Many of the shooters are now using this type holster with a 2 inch drop and an 8 degree muzzle forward cant. Definately not period correct but SASS allows this type of stuff to go on so alot of the competitive shooters use what ever they can to get the upper hand. Kirkpatrick..even puts out a holster that has an adjustable cant where you can adjust I think our to 20 degrees. To me...personally...this kind of stuff reminds me of police combat shooting gear...but SASS allows it. ??? ??? :o
Thanks for the kind words..means alot coming from fellow leather crafters.
-
Thanks, Outrider. I was wondering about that.
-
Outrider, those were some pretty holsters!
Marshall Will, I think that I will probably be making holsters forever! I haven't had anyone to really show me the ropes, I just keep plugging away at learning by myself. It is good therapy at any rate. If nothing else, I'll have plenty of leather around for "loaners" and to play around with. The last couple that I made are begging for double cartridge-belts. The first cartridge belt that I made was pretty tight for the .45LC cartridges. It may loosen up with use, however I bet it will fit a .38/357 just fine. Maybe I'll find someone in our area who can use it getting started. It is a good way to make friends!
I always like to have a few little "trinkets" around to trade and give away. I used to make flint strikers and show new reenactors how to make fire with flint and steel, then give them their "fire fixins' kit. I'm bringing home a bunch of "antique" locks that are used here to secure cemetary plots. They look really good on gun carts. I wish that I could get them wholesale. They are a little hard to find lately. Funny thing, though. There is no shortage of need for them! People are still dying to get into these cemetaries! :P
-
Marshall Will, I think that I will probably be making holsters forever!
Yeah, you're hooked. :D On your double belts, remember that they fit differently than single belts. I made the first pair almost 3" wide and they didn't work as well as I would have liked, they had a tendency to slip down a lot, especially if the bullet loops were full. Not only that, but I could hardly bend over to pick up brass because of all the leather I had on. The next pair I made were 1 3/4" wide and much more comfortable, not to mention more correct for earlier pistols.
-
Will, thanks for that information. I didn't know that. The double cartridge belts look cool, however may not be very practical. I have never made a cartridge belt with loops that go under the holster loops, either. I see them on the movies, but they don't look very practical to me.
I like to have the holsters very snug on the belt so that they don't ride up and down when you draw. I am tempted to tie my holsters down to keep my regular gunbelts from riding up on my skinny hips. This has been less of a problem recently; however I want to get back to the way I was a few years ago. I've still got about two inches to go. I try to make my belts long enough to give me plenty of leeway. From what I gather, it is best to size your belts by bhe distance from the buckle tip to about the mid-point in the array of holes for the buckle tongue. That gives you some play. That reminds me of something. I'll need to start a new thread for it. The topic will be "old-fashioned buckles"
-
Beautiful work Outrider!
Thanks for sharing this with us. I need to make myself a better shotgun slide and you have given me some very good ideas.
-
Yup!!, Bootiful work pard, the finish looks superb!! Ya should feel reeeel proud, ya got the right ta be!! ;D
Paladin (That thinks Outriders work is Brill!! :D ) UK
-
I've been workin' on saddles and haven't had much time for anythin' else. But, I figured I could at least post a link the latest set of saddles I made. 1870s Colorado style, half-seat, stock saddles. http://www.willghormley-maker.com/1870saddle.html
Will
-
I love those stock saddles. Thanks for the link, Will. Good work, pard.
-
Will,
Way cool! Can you estimate how many times you smacked a stamp into the leather to build that saddle? Looks so good it makes me want to buy a horse to put one on. Oh yea, I live in the city! :o >:( ;D
-
I wanted something with an ex-military look so this is the holster I made. I started with a belt I picked up at a secondhand shop, converted the buckle to "ranger style' with some scrounged and some new brass harware, and then did up a matching cylinder pouch and shotgun slide. I'm doing a matching knife scabbard next.
Icebox Bob
-
Howdy Icebox Bob,
Nice looking rig. The holster buckle is a real classy touch. Thanks for sharing you project.
-
I like the half-flap on it. Looks good. Thanks for sharing it with us. Be sure to post a pic of any other stuff you do.
-
Nice work Icebox. I've thought of making a slim jim style but haven't gottin around to it.
SR
-
My Colt's new pocket :)
(http://i23.photobucket.com/albums/b363/major101/pix2907258468.jpg)
-
Nice work, Major. The oxblood looks good with the dark overtones. Did you airbrush that on?
-
Howdy Pards:
Here are some photos of a new knife sheath I just finished for the manager of the local Leather Factory. The inlay is Canebreak Rattlesnake. I particularly like the way the stripes are configured. The knife was custom made for him by a fellow in GA.
-
I got to say that is a handsome set... Very nice
-
That really works. The snakeskin is a good accent for the stag handle.
-
Howdy Major:
I sent you an e-mail about the grips.
-
Just finished a shoulder rig for my new Beretta Laramie (New Model No. 3 copy w/repro S&W grips added) and thought I'd share a look with the board.
(http://img.villagephotos.com/p/2005-5/1013589/copyforwebsite.jpg)
-
That really looks great, Dave. I love the border design. How did you accomplish the very edge lines on it? Nice rig, pard. How's about a close-up of that border design? It's outstanding.
-
Irish Dave, What color die did you use? I love it!
-
Wow! That looks great! I am with the Marshall on the border! How about adding it to the border library here.
http://www.cascity.com/forumhall/index.php/topic,15766.0.html
Very well done. DM
-
Thank you, pards.
Would this do?
(http://img.villagephotos.com/p/2005-5/1013589/Laramierigdetail2544.jpg)
Will:
The outer and middle borders are rolled on with hand embossing tools.
Tommy:
It's a cordovan dye, thinned and applied in multiple coats and hand rubbed after each one. Don't really have a set "formula," in fact, I probably never do it exactly the same way twice. I just kinda work it till I get the look I want.
-
The outer and middle borders are rolled on with hand embossing tools.
Thanks, I have a roller with a similar look but the spacing is way wider than that one. I'd never thought about using it on a border. I'll have to give it a try. Thanks for the detail.
-
Irish Dave, that is absolutely beautiful. It is a credit to your workmanship that you could have stayed so consistantly perfect with those borders. Makes me want to go practice with my little tool set!
-
OK then it ain't Cowboy
This is one of the helmets I made for the TNT film Tecumseh
It is a copy of the early militia dragoon helmet
All leather with a pewter plate and Brass scales on leather chin strap ,horse hair comb .
If you should watch the film watch for the actor, riding with Gen. William Henry Harrison ( later President Harrison)
in my roll as a Cornet *, and aide to camp.
(http://i23.photobucket.com/albums/b363/major101/PICT0002.jpg)
(http://i23.photobucket.com/albums/b363/major101/PICT0003-3.jpg)
[Dead link removed by moderator]
-
That's really fascinating, Major, I've never seen one before. Nice job getting the compound curves. I'm impressed. Thanks for posting it.
-
Maj. 2,
If you ever get out to the mid-west, the Cavalry Museum at Ft. Riley has a couple of similar helmets on display.
I'm still in my WWI Uniform from volunteering at the National WWI Museum at the Liberty Memorial for the VFW. A wonderful group. Got my picture taken numerous times. I have an original WWI officers uniform that I can squeeze into and wear it when I volunteer sometimes. Then wore it to Tango, the girls like a fellow in uniform. ;) ;D
-
Years ago , I was at Riley , fascinating place ... We (the 7 ILL Vol. Cavalry) rode from Leavenworth to Ft. Riley in uniform.
About 24 of us ... then a few of us the next year did a mounted Black Hills trek.
but the best was the 13 day campaign ...La Grange, Tenn. to Mobile, Al. through Holly Springs NP to Newton (Station) and on south.
We made front page news.....
Yankees on Horseback in the deep south , we were received like kings :)
Thanks for the complements... :)
-
I just got done with these two projects. I just oiled the scabbard. So it will not be as dark when it soaks in. Now I've off hunting to break them in.
Buff
[Dead links removed by moderator]
-
Fine work, Buffalo. Those look really good. I like the border stamp. The saddlemaker I learned from had one like it that he made from a piece of steel. He got me started making my own stamps. That is one of the first ones I made. Enjoy your trip.
-
Boy, you guys have been busy while I've been...doin' other stuff. Compared to some of the stuff I've just seen, I'm rather embarrassed to make a post, but I will anyway.
Mostly this is about "3:10 to Yuma" anyway, and not about new leather I've done. I just added a quick review of "Yuma" to my "Yuma" page of my web-site. The movie is worth seein' if you 'aint doin' anything else Friday night. Me an' some of my boys is goin' to be at a local theater with our guns and hats, hoo'rawin' the crowd. It aught to be a hoot. You can see the review at: http://www.willghormley-maker.com/310toYuma.html
See ya' on the range,
Will
-
Thanks for the link to your stuff, Will. Good work. I'm going to see the movie tomorrow night. I guess I'll get to see your gear in action. Literally. Thanks for the post.
-
I happened to run across a Celtic Sporran and really like the design. I decided to make one for my carryall. It took me a while to figure out how it went together. Usually they are made of a lighter leather but I used 4 to 5 oz. The only trick is once you have it sewed inside out, you have to wet it and turn it right side out. There are a couple of parts better finished while it is still in pieces, but as you know when flying by the seat of your britches you realize that too late. Hence the creation of wierd sewing implements. The straps are just a belt and buckle with a couple chain snaps. They hook into two D rings in the back. I use the new Tandy ECO-FLO dye and man do I like it and the colors available are very cool. I used a Bison Brown. Enough chatter. Here are the photos. It is comfortable and once you get the correct sequence of assembly, it is also very easy to make.
Any questions email me at:
bluesman@acd.net
Triggersmith.
-
Nice job, TS.
-
I kinda figured I'd hear from you Dave. I'll be thankin' ya. That's high praise from a craftsman such as yourself.
Triggersmith
-
You're very welcome, pard. You did a good job. I especially like the finish, it has a very nice authentic/antique look.
-
You are very kind Dave. It is my understanding the traditional color preferences were either dark brown or black. I really like dark brown.
Triggersmith
-
Man. I REALLY like that. I've thought for years that a sporran would be good for that, but never did anything about it.
You done good.
-
Much obliged Forty Rod. It's nice to have your work appreciated.
Triggersmith
-
That's really great, TS. I've never seen one before. It looks like a really comfortable item to have at your side. Lots of things done a little differently than what I've seen before. It really feeds the imagination. I agree on the Bison Brown, good choice.
-
Much obliged Marshall. I've always valued your opinion. Yes it is comfortable. There are 2 straps that are worn with this. The other has chains on the end of the strap that hook onto the Sporran. Allows the Sporran to sway a bit while you are struttin our stuff. I made the llid fastener from a wood drawer pull. Drilled a couple holse and cut a small channel for the thread and stained it. I think it is fascinating to draw from different cultures for our ideas. That's always been the American way.
Triggersmith
-
Ray
You know want I think about it ... and shot you an Idea ...
and I particular like the shape of the front flap it has an elegant re-curve to it.
the color is perfect too.
-
Attached are pictures of a Shotgun belt I just finished. Nothing fancy, just a basic belt. The belt loops are fabricated from 1-1/2" cotton webbing. I tried to space the shells in groups of two.
I'm working on a couple of sets of saddle bags using help received from this forum. I will post my progress after I get past the half way point.
-
The belt looks good, Johnny. I like the contrast between the cotton and the leather. It's striking. Nice idea to make the couble loops side by side, too.
-
Hey Y'all,
With filming of "Appaloosa" fixin' to start in New Mexico, I built a web-page about the movie. Ed Harris may use a rig I made for him last August, but nuthin's set in stone. The novel, "Appaloosa" by Robert B. Parker, is a "must read" for anyone who likes Westerns, and I'll bet money the movie will be well worth seein' too.
You can check it out at: http://www.willghormley-maker.com/Appaloosa.html
Take care of yurselvs,
Will
-
Good site, Will. Thanks for the link. It's always good to see the leather you make for these movies.
-
Here is a new bandoleer and holster rig I just finished for a friend of mine in Colorado. It's for a 58 Remmy and is made from my own patterns. I used Tandy's new black ECO dye and a light wash of very dark brown as a last coat. It takes away the blue cast and makes the leather look like it has endured 40 miles of bad road. I like the results. I have a hard time with black giving me that bluish cast. Any advise out there to solve that problem is appreciated.
Watch yer Topknot
Triggersmith
-
looks great, TS. I like the long contoured shape. It makes a really nice line for your eye to follow. Thanks for sharing.
If you use Nolan's Vinegaroon dye, there won't be any blue to it at all. Making Old-Time Dyes (http://www.cascity.com/forumhall/index.php/topic,11991.0.html) There's nothing wrong with a top coat of dark brown, though. It makes a nice, rich color. I've also done a heavy brown color first then dyed it black for a similar effect.
-
Been doing leather work for about 9 years for myself and now I've finally got the better half to start shootin so I had to made her something worthy for her. And I wanted it to be very girlie. She was very pleased on how it came out. ;D
The only Red leather that I could find was embossed with a alligator print, so seeing I didn't need to do any carving, I added a few spots.
On the right gal, (Katherin Zeta Jones) that back billet would be ......inspiring.
-
E.R., Thanks for the compliment. The wife really likes it. And it fits her very well. I had to do alittle thinkin on the shape as you know, girls are shaped just a bit different. It was alot of fun to build.
That research was a killer, huh?
-
Guys, what spacing measurement do you guys suggest for bullet loops for .45's, .38's, and .30-30's? Thanks in advance.
-
IIRC, I use 3/4" for .45s and .44s and 5/8" for .38-.357 but that is for laced through loops.
-
I just got these holsters today from Springfield Slim (Whyte Leather Works) and I absolutely love them! They fit my Remington NMA 5 1/2" (top) and my Uberti Cattleman 4 3/4" (bottom) perfectly.
Here is a blatant plug for Slim:
http://www.whyteleatherworks.com/
John
NICE! It don't have to be tooled to death, or look like something from a Mexican parade to look classy.
-
What makes a knife sheath left handed?
I'm a righty and prefer my blade to have the cutting edge back on the left side, forward on the right. That way when I draw the knife, the cutting edge is up in either case.
Is that wrong?
Forty,
It's definitely better in a fight. BTW, tell the folks on the wire for me that the wife's doin' fine, would ya? BH banned me for speaking the truth.
-
Done.
I told you, "don't poke the bear".
-
Done.
I told you, "don't poke the bear".
I was thinking he was more like a well connected poodle with a fence to hide behind, or something. Never occured to me that he would EVER be considered a bear.
-
Howdy Pards
Here are some of my accessories....12 gauge belt loops...20 gauge belt loops (double)...belt cartridge loops (.45), and a set of staging loops (holds 20 rounds to take to the line)
-
Nice accessories, TR. Clean and attractive. What length strap do you use for the loops on the 12ga loops so they slip in/out easily, resting on the keeper strips at the bottom?
-
Marshall:
The stitch spacing is as follows:
20 gauge single loop...1 3/4" on the loop and 7/8" on the slide
20 gauge double loop..2 3/8" on the loop and 1 3/4" on the slide (as shown in picture)
12 gauge sinlge loop....2 1/8" on the loop and 1" on the slide (as shown in picutre)
12 gauge double loop..2 7/8" on the loop and 1 7/8" on the slide
This should work for you
Outrider
-
Howdy Pards:
Here is a buscadero rig I just finished for a pard...I still have to add a horsehair tassel to the hammer strap..hummmmmblack or white horsehair???
-
Looks good, pard. The white stitching makes a nice contrast for the black. With this one you could put either white or black horsehair on it. Can you get a tassel that has both white and black in it? That way you could have a black one with some white accent in it.
-
now that is a thought thanks
-
Marshall:
The stitch spacing is as follows:
20 gauge single loop...1 3/4" on the loop and 7/8" on the slide
20 gauge double loop..2 3/8" on the loop and 1 3/4" on the slide (as shown in picture)
12 gauge sinlge loop....2 1/8" on the loop and 1" on the slide (as shown in picutre)
12 gauge double loop..2 7/8" on the loop and 1 7/8" on the slide
This should work for you
Outrider
What about for .357 and .45? Thanks in advance.
-
Marshall:
The stitch spacing is as follows:
20 gauge single loop...1 3/4" on the loop and 7/8" on the slide
20 gauge double loop..2 3/8" on the loop and 1 3/4" on the slide (as shown in picture)
12 gauge sinlge loop....2 1/8" on the loop and 1" on the slide (as shown in picutre)
12 gauge double loop..2 7/8" on the loop and 1 7/8" on the slide
This should work for you
Outrider
I don't know how the heck I missed this yesterday, but thanks, pard. I appreciate it.
And thanks to Travis for posting about it so I'd see it.
-
THIS IS NOT MY HANDY WORK!!! (Thanks to Triggersmith)
Pic of the front...
(http://www.gunfireblog.com/images/Walker/DW_front.jpg)
Pic of the back...
(http://www.gunfireblog.com/images/Walker/DW_back.jpg)
I am going to take a swag at making a custom belt to go along with it as well as a cartridge box for a couple boxes of paper cartridges. I have a cap box which will probably work as well.
Can't wait to get it!!!
[FYI: Its an ASM Walker, but, I might carry my Uberti in it instead...]
-
TS did you right, pard. It looks great. You can wear that with pride.
-
I have several of Triggersmith's pieces, and I like his work .. I'm capable ( well .. :P adequate ) but I liken it to this...
I can make my dinner that's not to bad, it will feed you ... but a gourmet can make you a meal that's an experience and a culinary delight.
Ray is a leather making Gourmet :)
-
Attached are photos of a set of bags I just finished using the help received on this forum.
I used some free leather that one of my customers gave me. This is sort of a practice set and I will be making another set of bags for myself over the winter using a non embossed leather. As I finish a project, I usually start thinking of what I can do to improve that item the next time I make it.
I had to sew the bags inside-out by hand. I used a series of welding clamps to hold the gusset and front/back together while sewing. I left a small space for sewing and just kept moving the clamps forward. It was fun figuring out the assembly sequence. Actually the whole project was a lot of fun.
Many thanks to Major2 and Outrider for their assistance and help on this project.
-
Hello Johnny McCrae
Nice job, and they look 1800 too :) ;) :D ;D
-
Looks good, Johnny. Nice even curve after you turned them right side out. Good work. Those clamps sure did hold it nicely, good idea. It'll be nice to see the next ones.
-
Johnny...great job....they look very good and I especially like the "Y" strap. I agree with you about the forum..lots of good info and good fellowship
-
What about for .357 and .45? Thanks in advance.
Travis sorry for the delay
.45 Colt....1 3/8" on the loop and 5/8" on the belt
.38/.357..1 1/8" on the loop and 9/16" on the belt
.32 cal. ..1" on the loop and 1/2" on the belt
.500 S&W mag...1 1/2" on the loop and 5/8" on the belt
105mm hozitzer....heheheh your on your own :D :D ::) ::)
-
Travis sorry for the delay
.45 Colt....1 3/8" on the loop and 5/8" on the belt
.38/.357..1 1/8" on the loop and 9/16" on the belt
.32 cal. ..1" on the loop and 1/2" on the belt
.500 S&W mag...1 1/2" on the loop and 5/8" on the belt
105mm hozitzer....heheheh your on your own :D :D ::) ::)
Johnny,
Those clamps ARE a lifesaver. The bigger ones are pretty unwieldy, but they don't tend to bruise the leather so bad.
Outrider,
Thanks for the figures. My bullet loops are kinda hit and miss. Fortunately, a saddlemaker friends of mine has a $40,000 machine that skives the leather down incrementally. Makes really nice leather for bullet loops.
-
Howdy Pards.
Here is a holster I just finished this morning. It is a modified version of Will's 49er holster....a transition from slim jim to mexican drop loop so to speak...color is mahogany...lined in pigskin..fitted for the new vaquero 4 5/8" brl. I have also made this puppy in a cross draw version...works really well
-
Howdy Pards:
Here is a couple of concealed carry style holsters....off duty "pancake style for S&W 4" and 45 auto
-
Nice work, Outrider. You've sure been busy. Nice work on all the rigs. I particularly like the way the off duty one catches the hammer of the 1911 when it's fastened. Thanks for the photos.
-
Howdy Pards
Will I think I figured out how to make this picture thing work , this is the first holster and gun belt I made, after 3 months of learning leather craft , the other leather items I made after the holster and belt , so here goes.. ???
Ten Wolves Five Shooter :D ;D
-
Good job on the leather. You've certainly cranked out a few items in the last couple months. Looks like a complete outfit including the spur straps and cuffs. Nice match on everything. It all works together. Good job on the photo, too. Once you have it, it's easy. It's also addicting. The leather, that is. ;D
-
Nice job Ten Wolves....they are very impressive
-
Nice work all around, fellas.
-
We were starting to get on another topic about how we got started working with leather. It is a good subject so I split those posts off to form a new thread just for that. Hopefully others will chime in to tell their stories. You canl find it at: How did You Get Started In Leatherworking? (http://www.cascity.com/forumhall/index.php/topic,17272.msg219042.html#msg219042)
-
I thought I would share a picture of a rig I did a little while back
-
This is a rig I did resently
-
This is a picture of three of the western rigs I've made
-
Nice work, pard. I like the conchos. Nice balanced-looking holsters. Say, how many guns do you pack at one time?
(http://www.cascity.com/forumhall/index.php?action=dlattach;topic=228.0;attach=12476;image)
-
Howdy Will
thanks for the flowers, as for the six shooters, when I'm feeling real tall I has my 7 1/2" guns and when eyes feelen a little shorter I has my 5 1/2" ers. ???
Thanks for the come back Will, I really loves doin this leather work . :) ;) :D ;D
Ten Wolves :D ;D
-
I really loves doin this leather work . :) ;) :D ;D
I think all the pards here would agree with that. ;)
-
Howdy Gents
I thought I would show some of my stuff, this one is a hunting holster/ shootgun & cartridge belt combo, for CAS events, all I have to do is remove the holster and I have my shootgun shell & cartridge belt, holster back on, shot shell slides off, and you have a hunting rig. I prefer a cross draw holster for hunting , you don't have your long gun bumping into your side arm, like you would if you wore a strong side holster.
You Pards have great day ;D
Ten Wolves ;) :D ;D
-
That's a good idea to double up on the use of your equipment. It breakes it in nicely and you get to enjoy it more. The rig looks good. Nice blond color on it. Good work. Is that your hunting holster? It looks to have a hammer thong tucked away back there.
-
Howdy Will
Thanks for the kind words, the gun is a 44 flat top, it's one of my hunting companions,I switch around with my shooting irons, and there is a hammer thong, you can't see it real well in this pisture . I had a bad experence with strapes that snape, it seemed like when I would be moving through brush, the snap was always getting poped open. so I'm going to try the hammer thong and see if it does any better, I'm hopping it does. The hammer strap with snap was on some of my strong side holsters, I don't think I'll have that problem with this cross draw rig, and it won't be in the way of my rifle.
Take Care Will :)
Ten Wolves :D ;D
-
Hi All,
I finished this holster not too long ago. It's a real late (1900) style but, when I saw a picture of the original, I really liked it.
-
Howdy Sawdust Jim :)
Nice work, I seen this style before, and you captured it very well , my hats off to you pard ;D
Ten Wolves ;) :D ;D
-
I don't recall having seen that holster before. It's really unique. It's easy to see why you like it. You did a good job on the concentric stamping. That's not always easy to get right. Nice work. Good design. Do you have any more information on the original or where you found the photo?
-
Thanks for the complements!
I found the original on one of the antique arms sites I check out from time to time, looking for interesting paterns and tooling.
The site is called Antique Arms America. http://www.antiquearmsamericainc.com/
Look under "Western Leather" towards the bottom of the list.
Sawdust Jim
-
Thanks for the link. I saved it for future reference. Good site. There was a fantastic Meanea holster for sale there, too.
-
Hello. I'm new into leather work, and would appreciate any tips or suggestions to make my work better.
-
Marshal:
Did ya get a gander at the asking price for that Meanea holster???? ::) :-\
-
Welcome, caliberclyde. We like to see new leatherworkers. Good color choice and the dark background sets the design off nicely. As to getting better, the best suggestion I have is practice, practice, practice. The more you do, the better your work is. You obviously have the basics down because you're here. One thing that you may want to do is to get patterns and books from your local leather store and try copying the different styles of the leatherworkers that write them. As you do more stuff, you will evolve your own particular style determined by the way you make your designs as well as how you use the tools. When I was first starting out, I sat down with a swivel knife and made all kinds of cuts on scraps. Over and over until I got a leaf or scroll the way I liked. Then I'd do it again the next time I wanted to fiddle with some leather. It's all a matter of getting enough miles on that knife and taps on those tools. Looking forward to your next project. Thanks for the post.
-
Did ya get a gander at the asking price for that Meanea holster???? ::) :-\
Yeah. I wish I could get that for some of mine. Let's see, one a week wouldn't do bad..... :D
-
Here is a picture of a Butt Cover I just finished for my Sharps. Also attached is a picture of the end piece just after wet-molding but before trimming and assembly.
I'm going to make this one over and tweak it some. Usually it takes me a few tries to get things the way I want them to fit and look.
-
Johnny the stock cover looks relly great...nice job pard
-
Howdy Pards:
I have finally gotten the time to finish one of Will's "Jessie James" holsters. This one is patterned for the Ruger New Vaquero. I will make a crossdraw version next.
-
That's one of the nicest buttcovers I've seen, Johnny. I'm usually too lazy to mold the end cap but it sure makes a good job. Looks great.
Good work on the holster, Outrider. I love the simple, flowing design. It really doesn't have bold focus points like most designs. This one takes your eye all over.
Thanks for the pics, pards.
-
Howdy Gents
Johnny , thats a good looking butt cover, I've been fooling around with these for a while now myself , but I've been sewing them and then turning them inside out to hide the sewing line, which is ok if the leather is thin enough to work with, but sometimes its not and it wont turn, even if you wet the leather , so I just leave the sewing on the outside, and it still looks good, but I like your idea, and it really looks nice, so if you don't mind, I think I'll give your way a try . Thanks for the post and the pictures. :)
Outridder, It's always a pleasure to look at your work, and this piece is no exception, NICE job I really like the patern it;s very unique, Like Marshal Will Wingam said, your eyes are all over it. :)
Job Well Done To Both Of You 8) My Hats Off To Both Of You ;D
Ten Wolves ;) :D ;D
-
Many thanks for the compliments Pards!
Outrider,
Beautiful job on the Jessie James Holster! Marshall Will’s comments hit the nail on the head. This design gives the holster a real elegant look.
Ten Wolves,
Check out Triggersmith’s post of June 29, 2006 on the Leather shop. He does a real good job of describing how to wet-mold the end of a rifle stock butt cover. I think you will be pleased with the results.
-
I'll do that Johnny , Thanks for the info.
Ten Wolves :D ;D
-
Howdy Johnny
I checked Triggersmiths post, on RIFLE & SHOTGUN COVERS , great post , he does a nice job of explaning what he did and how to go about it. Thanks to you and Triggersmimth , I think I can get this done, I look forward to new ideas and neat projects. 8)
Thanks again and have a great week :)
Ten Wolves ;) :D ;D
-
Howdy Pards:
Thanks for the nice comments. However we should also thank Will Ghormley for such an elegant design...
-
Howdy Outridder
Your wright about that Outridder , A Big Thanks To Will Ghormley, for all he's done for all us leather Pards , I got started with making my first holster and gun belt , by useing Wills paterns , and I have to say Will makes it so easy for the new leather worker, that when I finished my holster and gun belt , I couldn't believe I did it, and I still don't , his paterns helped me go on to other things , and to do my own designs, it opened up the world of leather to me, and for this I'm very GRATFULL,
Thanks Will Ghromley :D
Ten Wolves ;) :D ;D
-
Johnny and Outrider:
Nice work on both projects. Lookin' good.
-
I finally got the Frank James holster finished. This is cut for the Old Ruger Vaquero..Bisley 5 1/2" brl
-
Hello Outrider, Wow! Another great Holster from your workshop. Beautiful workmanship!
-
Lookin' good, Outrider. Thanks for the photos. Great job, especially on the rosettes. What tools did you use to make them?
-
Excellent work Outridder, nice style and tooling design too, not to mention that Bodaious Bisley, you have some really nice hardware Pard..... ::) :o ??? 8)
Ten Wolves :D ;D ;)
-
Thanks for the compliments pards...but again we have to thank Will for the nice design. Unfortunately, I have that "gotta have" bug when it comes to harware... ::) ::) I always had a thing about the Bisley's..in fact my first Vaquero, which was a 7 1/2" job was converted to a Bisley (since Ruger didn't make one with that barrel length)..talk about a smooth and well balanced gun ;) ;) :D
-
I like the Frank James Holster a lot! I just finished three but didn't bevel my swivel knife work. Now I am thinking I should have after looking at yours. I also went with the cut out for the hammer.
-
You know, when I see the work you guys do with my patterns, and hear about how it gets you started on other things, it just makes it all worth while.
Will
-
Back ya Will
Will, I've been trying to thank you personally, for some time now , on several other post. anyway, THANKS PARD, I started out useing your paterns, after having them recomended, by Wayne Christenson, of Standing Bears Leather, in Resesa Ca., and I haven't stopped yet, i'm even useing some of my ideas , based on your paterns with nice results , you've made leather working, fun and enjoyable for alot of us Pards out there, you put a lot of thought in designing all these paterns, and I just want you to know how we all appreciate it. KEEP UP THE GOOD WORK. 8)
Thanks again Will Ghormley :D ;D
Ten Wolves Five Shooter ;) :D ;D
-
Well, you're welcome Ten Wolves.
I've always had a good time workin' leather. It means a lot to me to be able to share that feelin' with other folks. I'll do my best to continue helpin' you guys do your best.
Will
-
I have had to buy a second '49er pattern pack because I wore out the page with the percussion patterns. I have made a lot of plain jane slim jims and I love'em. Thanks Wil for your wonderful products.
-
Tommy a great tip from the old Bianchy tapes was to save your most used patterns on print board and cut them out for easy border tracing. These will last a lot longer than tracing through the orriginals and really speeds up the process. I purchased multiple copies of Wills patterns and kept two each for my own use and sold the remainders.
-
That is a good tip, but I found it even easier to use foam board like they use for posters to make patterns. They dont wrinkle, and store much easier than delicate patterns from paper. Just slap them on the leather and go to work.
For details like carving patterns, I use the plastic? sheets they use for blueprint and architecture drawings. I had a bunch of scraps given to me, and one side is smooth, while the other side is rough. Trace it on with a pencil, cut it out, then spray the pattern with a clear finish of some sort. I have used these patterns many times, and have had no troubles with them. Much stronger than Vellum. Cant find it anywhere around here tho.
DM
-
I use white poster paper, which is nice and thick , so you can use it over and over, i make a copy of the patern on to the white poster paper, useing carbon paper , then cut the patern out of the poster paper, I do this with all my paterns, this way the original stays new, by doing this you will have a templete of everything you make , I have several copy's of each holster patern use the first copy to make all the other copys, and then you can make any changes on them, with different changes made to each one, like different barrel cant's or lower cutt lip on bucket, or wider, shorter, or narower skirt, or wider or narower holster loops, this way, you have the patern you want, when you want it . I buy the poster paper at any of the stationary stores out there and I always get the large size for this, you can also use manilla folders, provided they are big or long enough, and these store real easy, I save all the large and extra large mailing envelopes, I get my hands on , and store most of my paterns in them, you can also use plastic sealable bags . I hope this will be a help to some of my Pards. ???
You Pards have a great day ;)
Ten Wolves ;) :D ;D
-
Howdy Pards:
Geez...I am at it again. I have just completed this belt cartidge pouch utilizing the pattern as seen on the Frank James holster. This is really one nice pattern and is fairly easy to carve. I wanted to see what it would look like with an oil finish, and also this pouch is a donation to our local club (Ocoee Rangers) as a door prize at our X-Mas shoot and gathering.
-
Howdy Outrider :D
Nice work on the pouch, the tooling looks right on, and I like the oil finish, it gives the piece a nice soft luster, which is what really like about an oil finish, my hats off to you again . ;D
Ten Wolves ;) :D ;D
-
Hi All,
New member here. Been doing leather for 6 months or so. Got a couple small projects under my belt and a couple holsters & belts in work. I've been learning a lot just sitting out behind the sage brush and listening but finally decided I need to get up by the campfire.
Anyway, nice pouch. I need something like that. What is an oil finish? What kind of oil? How do you apply it? Do you just put it on over the raw leather? Do you have to reapply every so often? Sorry for all the questins, just trying to continue my education.
Thanks a lot,
Cactus Patch Kid
-
Howdy Kid
I'm not sure what oil Outrider used, maybe he will come in here and let us know , but there are a few oils out there you can use with good results, there is Lex-oil, Neatsfoot oil, and Extra Virgin Olive oil, I don't have any expereance with Lex-oil, but I now some Pards use it , I like Neatsfoot Oil and the Extra Virgin Olive Oil , they give me great results . you can put it on unfinished leather or on some finished leather , do it in light coats, you can also layer the oil to get lighter and darker shades on the same piece of leather, sort of a two tone effect. As the leather ages, look for any drying , if the piece is dry you can apply, eighter of the oils ,to replenish the leather. I'll send a picture of a holster rig, and the accessories, all this leather is natural , and oiled with Neatsfoot Oil, notice the two tone effect on the ropping cuffs, hope this answered some of your questions.
Ten Wolves ;) :D ;D
-
Nice pouch, Outrider. Looks like the design will match your Frank James holster. Looks great. Thanks for the pics.
Welcome to the forum, Cactus Patch Kid. There are some really great leatherworkers on here. They should be able to answer just about any question you can come up with. Looking forward to seeing your posts. Be sure to show us your work when you get a chance. Regarding oil finishes, I've used both neatsfoot oil and olive oil. I put them on once and re-apply only if the leather starts to get dry. I've also mixed dye with neatsfoot oil for a very subtle addition of color. Be sure to experiment with that to see what you're going to get before you put it on a finished piece. Also, with oils, be careful not to get too much on or the leather loses its ability to hold a shape. Some projects don't matter but some do. Holsters, for example, need to retain the shape so your guns will slip in and out without too much resistance. Resistance will slow you down, if that's a consideration. Glad to see you with us.
-
Howdy Cactus Patch
Welcome to the forum. To answer your question the pouch was done with neatsfoot oil..several coats to get to the color I wanted. Then a light coating of fiebings acrylic resolene then atom wax to finish it off. I also use extra virgin oilve oil on some projects.
Ten Wolves and Marshal...thank you for the compliments. I hope some cowboy shooter will be happy with this pouch...it will be a donated prize at our x-mas get together.
-
Pards,
Thanks for the info. The rigs I'm working on now are both black but I'm already planning the next one. Wanted something different than dyed leather. This oil finish may be just the thing.
Thanks again for the replies.
Cactus Patch Kid
-
Hey Outrider,
That pouch does look real nice. I've tried to get Tandy Leather Factory to come out with the large floral stamps used on Frank's rig. They were originally designed for saddle decoration I'm sure, but they are great for holsters and belts as well. If enough folks bugged TLF, they might add them to their line of stamps. They've added enough other stuff to thier stamp line, you'd think they would want good saddle stamps.
Hey Kid, welcome to the forum. Get some photos in when you can.
Will
-
Howdy Pards:
Hey Will...thanks for the compliment....yes, your absolutely right TLF should come out with a stamp like that...I somehow get the feeling that TLF is kind of leaning towards the weekend crafter much more than they used to...but I guess that is where the money is.
Will...if you ever find a supplier for that stamp that is priced reasonably I would be in for one of both the sizes...and I think Marshal Wingham is also interested.
-
I think your right about TLF being geared toward weekenders. It seems Hidecrafters carries a little more professional line of tools. Is there an outfit that is geared even higher??
Nice work on the pouch btw!!.
DM
-
Alright, pards. I started a thread to see how many of us are interested in those floral stamps, including a link to Tandy customer service to see if we can generate enough interest on their part to make the stamps available. Be sure to check it out if you are interested. Check it out anyway, you may get interested.
http://www.cascity.com/forumhall/index.php/topic,17865.0.html (http://www.cascity.com/forumhall/index.php/topic,17865.0.html)
-
Will just posted a good idea for getting quality buckles for our rigs and belts. It was a good idea so I split it off into a separate thread. Here it is: http://www.cascity.com/forumhall/index.php/topic,17870.0.html (http://www.cascity.com/forumhall/index.php/topic,17870.0.html)
-
Howdy Pards:
Dalton...thank you much for the compliment on the pouch. I would also like to find a higher end supplier. It almost seems like you have to special order any more.. Recently, my local TLF guy has ordered some double shoulders form a supplier in N.J., due to the garbage he had been getting. The stuff he had been getting which was out of Mexico was real garbage...I snapped up all the sample hides the outfit in N.J. sent.
If anyone can direct me to a supplier for and Al Stohlman Brand 1/2" round end strap punch....TLF does not handle them anymore and I would like to get one.
-
Here are a couple I made for some CAS shooters. 8)
-
Nice work, OG. I particularly like the contrast between the dark brown stain and the silver/pink hardware. Really striking. Thanks for sharing your stuff.
Welcome to the forum. Looking forward to your posts.
-
Outlaw
Nice work on both the rigs...and welcome to the forum...great bunch of pards in here.
-
Howdy Outlaw Gambler :)
Very nice work, the basket weave is right on , and you did a nice job of tappering the belt. and I'll bet those accessory's will make some female very happy. good work all around, and a BIG WELCOME TO THE FORUM
ten Wolves Five Shooter ;) :D ;D
-
Howdy Pards:
Thought you might want to see a set of saddle bags I just finished for a client.
-
Great saddlebags, pard. I like the simplicity of the design with the oak lef accents on one side. The oxblood suits them well, too.
-
Howdy Outrider ;D
Neat bags , they look like their big enough to carry a lot gold dust in them , when I get around to making my own, this is the size, I think I'll go for.
Ten Wolves ;)
-
Howdy Outrider,
Beautiful job on those Saddle Bags! I always enjoy viewing your work.
What weight of leather did you use?
-
Very nice job.
Buff
-
Howdy pards:
Thanks much for the compliments. It means alot coming from all you leather pards out there.
Johnny...I used 9/10 oz. for the main body and 5/6 oz for the gussets. The color is Mahagony oil dye.
-
Howdy Outrider,
Thanks for the information. I'm glad I asked because I never would have thought to use a lighter weight leather on the gussets.
-
Nice job, Outrider. Your client should be pleased.
-
:) It was a fun experience and I got a lot of help from fellow SASS members. Can't name them all but if anyone is looking to get started and you have a question just ask and you will be amazed at the help that will come forth.
The dark rig was for a lady shooter and since that one I have made a couple similar ones with the darker finish and contrasting conchos. Now to figure out a design for my wifes new rig
-
My Henry rifle has been somewhat nekid these last few years. I have finally got around to completing a project for me. Here it is.
(http://i22.photobucket.com/albums/b349/Mogorilla/Henry002.jpg)
-
Now that is one handsome looking case...I like the beadwork..very well done. I guess I will have to follow your lead and now make one for my Sharps.
-
Here's my newest Walker holster.
-
And 1 shot of the back side.
Looks like I need to clean the gun tho, oops.
-
My Henry rifle has been somewhat nekid these last few years. I have finally got around to completing a project for me. Here it is.
A fine sleeve. The fringe and beadwork work nicely together. It looks authentic.
Here's my newest Walker holster.
Great holster, pard. Clean and to the point with just the right amount of trim. It shows off D-style trigger guard and the loading lever so you can see what kind of pistol it is without even taking it out.
Good work, pards. Keep 'em coming.
-
I want to make a new rig for myself over the winter months so I'm making some practice holsters and tying a few new things. I just finished a Mexican Loop style with a large skirt. Don't know if I like the brass spots on the loop or the embossing on the skirt.
-
Nice holster there JM. I like it as is. I have made a few almost identical, and the one thing I did different was put the next size larger spot in the center. Gave it a focal point so to speak. Border looks good too!
Thanks for the kind words there Marshall. I like that scooped cutout at the loading lever. It does let you know what is there, and that its not to be trifled with.
DM
-
Howdy Johnny :)
That holster, looks good to me, I use nickle spots alot myself, I like the look, years ago I was told by an old timer ,that they started useing spots back in the 1800's not just for decoration, but the spots actually saved the leather from getting scuffed up and scared, so they helped to keep those hand carved and stamped holsters and belts looking good. NICE WORK ;)
Ten Wolves ;) :D ;D
-
Howdy Pards :D
I just finished this money belt and 3/4 skirt cheyenne holsters, and a knife sheath, I bought Ckuck Burrows dvd on holster making , and I highly recommend it , he is easy to listen to and follow, I used his method of dying and antiquing, and I'm real happy with the results, I've been trying to get this look for a long time, and Chuck showed me the way... 8)
Ten Wolves ;) :D ;D
-
Howdy Ten Wolves,
Thats a mighty fine looking rig you made.
I also have the Chuck Burrows DVD and its been a big help to me all around..
-
Howdy Johnny :D
Thanks for the flowers, it's been more fun than I can tell you , to be able to make things the way I invision them, reading the post, from all you pards out there and Chuck Burrows and also my mentor Wayne Christenson, I'm SURROUNDED by the best. So much knowledge out there , I try to gather as much as I can.
Have a Merry Christmas Johnny :D
Ten Wolves ;) :D ;D
-
I want to make a new rig for myself over the winter months so I'm making some practice holsters and tying a few new things. I just finished a Mexican Loop style with a large skirt. Don't know if I like the brass spots on the loop or the embossing on the skirt.
the spots and border work nicely. The whole thing looks balanced. I like the partial skirt. My current match holsters are similar. Good design, there.
the one thing I did different was put the next size larger spot in the center. Gave it a focal point so to speak.
This could be a good idea. I'll remember that for any I may do myself.
I just finished this money belt and 3/4 skirt cheyenne holsters, and a knife sheath
You did well on it. Good looking finish, all right. I guess I'll have to get Chuck's DVD myself one of these days. Nice work.
-
Howdy 10 Wolves,
Boy howdy, that Johnny McCrae took the words right out of my mouth. Yes siree Bob, mighty fine looking rig!! ;D Got a spot of drool to wipe off of the keyboard! :o ;)
-
Howdy Dalton,
Great looking Walker Holster! I like the way you did the Rosette and the border stamping. I'll have to try that.
Thats a good idea to use a larger spot in the center for a focal point.
-
Howdy Gents :D
Thanks Marshal Will & Dr. Bob, for the kind words , it was a lot of fun putting this together, and now I'm looking forward to another project. ;)
Mongorilla, thats a handsome rifle sleeve, it must of taken you a long time to do all of that fringe , nice work ;D I could use a few sleeves like this my ownself.
Dalton I don't know how I missed your holster , you did a beautifull job their, you even tooled the back side, I'm glad I caught Johnnys post or I would have missed this, are you going to wear this high or low on the hip, those Walkers are pretty heavy, nice job.
Happt Hollidays to all ;)
Ten Wolves ;) :D ;D
-
As long as it takes to cut fringe, it did not hold a candle to turn that dang sleeve rightside out. The beading was attached to a separate piece of leather then that used to reinforce the nose of the sleeve. It thought I was going to have a sleeve that looked real fancy on the inside! :-[
10 wolves, Johnny, and Dalton, all sweet looking work. A Walker sure would look nice on my hips. Great stuff guys. Happy holidays.
-
I guess I mispoke on the larger spot thing. I used a larger one in the center, then smaller ones on the outside. Same premise tho.
I made a pair of these for my 1860 and 51, but ended up shoving my wifes new opentops in em until she gets her barrels cut off. Tried that Tandy Institutional dye, and cant recommend it much. Kinda blahhhh.
I carry that Walker crossdraw whereever it wants to hang on my belt, but it rides fairly high. Cant argue with it too much, with that much weight. I can carry it all day during a match tho, in relative comfort. Usually gets handed to enough people wanting to see it that I get a break every little bit.
As far as decorating the back side, I always put the date, and try to put a Colt stamp on if its made for Colt. Then Rugers shouldnt stretch it out. The rest is just fluff for me to see, And it makes good practice time.
-
Howdy Dalton,
Thanks for posting your 1851 & 1860 Holsters. I really like the Spot treatment. I'll have to try that.
Those are some great lookin Holsters!
-
You fellows are doing some mighty fine work there. You all should be proud. :)
SR
-
Howdy Dalton :)
You did a nice job on this holster, I like the look and the graduating spots are a nice touch, you don't see this holster to much and thats to bad , I've always liked the style, maybe after some of the pards see youirs , we will start to see more rigs like this out there pretty soon . 8)
Happy Holidays ;D
Ten Wolves ;) :D ;D
-
Graduating the sizes of the spots does do the holster nicely, Dalton. It really makes them look good. Thanks for the pics.
-
Howdy Pards:
Thought I would put up these two pictures of my dungeon
-
Howdy Pards:
Here is a small holster that I just finished for a Bond Snake Slayer derringer.
-
Here is a pic of the rear of the snake slayer with the belt clip
-
I like the way you mounted the clip on that holster, Outrider. Just the right amount of holster backing the piece to keep oil off your clothes and prevent the hammer from digging nto your side. Looks nice.
Great workspace, there. I still don't have a good place to fiddle. If you find yourself short on space, I'll give you $150 for that old white Ferdco.
:D
-
Howdy Outrider :D
You have a nice work area there , and it looks like you keep it clean & neat , and thats the way it should be, a place for everything and everything in it place, that's what my Dad used to pond into me all the time, when I would use his shop, he'd say just remember to put everything back where you got it , and now I'm just like him.
You did a nice job on this holster too, the clip looks like it would be a good way to go with a holster this size, fine job all around.
Merry Christmas :D
Ten Wolves ;) :D ;D
-
Howdy Pards:
Thanks much for the compliments
Marshall...I bet you would give me $150.00 for it ;D
-
I raise the bid to $154.76
That's all that's left after I bought milk and cookies for Santa. ;D
-
Wow, a bidding war. Wait till eBay hears about this! :o ::) ;)
-
Here are a few shots of my 1st attempt at a gun rig;
http://www.iammercy.net/dace/Cowboy/Gunleather%20003.jpg (http://www.iammercy.net/dace/Cowboy/Gunleather%20003.jpg)
http://www.iammercy.net/dace/Cowboy/Gunleather%20004.jpg (http://www.iammercy.net/dace/Cowboy/Gunleather%20004.jpg)
Not great but not god awful either. Needless to say I learned SO much from my first fumbling, stumbling efforts. Having said that, here are some shots of my 2nd attempt to make myself a rig I can use for SASS events;
http://www.iammercy.net/dace/Cowboy/Drop%20Holster%20Rig%20003.jpg (http://www.iammercy.net/dace/Cowboy/Drop%20Holster%20Rig%20003.jpg)
http://www.iammercy.net/dace/Cowboy/Drop%20Holster%20Rig%20005.jpg (http://www.iammercy.net/dace/Cowboy/Drop%20Holster%20Rig%20005.jpg)
http://www.iammercy.net/dace/Cowboy/Drop%20Holster%20Rig%20006.jpg (http://www.iammercy.net/dace/Cowboy/Drop%20Holster%20Rig%20006.jpg)
Overall, I am VERY pleased with how this rig is coming together. The crossdraw holster for this setup is outside drying in the sun, hopefully the wet moulding works out well. Crossdraws always give me a hell of a time, so I am hoping this time around I ironed out most of the bugs by using a less severe drawing angle, a more secure & stable fold along the belt line and a beefier buckle/strap combo to secure the holster to the skirt.
Thanks for lookin' pards!
-
Seth:
You're right, pardner. Considerable change from No. 1 to No. 2. It's easy to see significant improvement in your edging treatment and a much more refined stitching process. Keep at it, pard, you're getting there. It's amazing how much we learn the more work we do. I know the rest of us would agree that we're all still learning with every project, regardless of how long we've been at it.
No matter how you feel about them now, one of these days (if you're like most of us) you'll have progressed to the point that you'll look back at these early projects and grin about how far your craftsmanship has come.
Like anything else, it's all about good fundamentals then practice, practice, practice.
Thanks for sharing these with us and keep cuttin' leather.
-
Much obliged pard! Being able to see first hand the obvious and considerable improvement from one project to the next gives me a great deal of satisfaction and greatly increases my enthusiasm and confidence in leatherworking. It's been a real privilege to be able to examine photos of the work of the truly talented leathersmiths that frequent this forum. Thanks again to all of you for helping to inspire me! Next up on my list will be a fully floral carved buscadero double holster rig for my wife. I'm looking forward to exploring that style and making adjustments to accommodate a female figure. It should be a great learning experience.
-
Well, I must say you've progressed a lot. That new rig is great. I like the border pattern along both the top and bottom edges of the belt, it gives the whole thing a more finished appearance. The stitching looks more even, too. All in all, great job. I'm looking forward to seeing that rig for your wife.
-
This one is patterned from an original F.A. Meanea, Cheyenne holster and money belt in my collection. I made this rig for myself and it is a bit fancier than those offered on my web site.
Adios,
Buck
(http://i21.photobucket.com/albums/b260/Buckstinson/DSC_0020.jpg)]
-
Howdy Buck
Nice job Buck , you really did a great job on the tooling, and everything else, the tooling on the holster, really stands out. My hats off to ya Pard :o 8)
Ten Wolves Five Shooter ;) :D ;D
-
;D ;D ;D
Very very very nice! DM
-
Buck, that's just plain beautiful. I really like it. It sure looks like a Meanea, all right. Outstanding work. Do you have a close-up of that border pattern? Thanks for posting it.
-
This one is a little better. You won't find these stamps anywhere, because I make my own. As I said earlier, the gear I make is patterned from original pieces in my collection. Some modern tooling stamps are close, but close isn't good enough for me. I try to give my customers exactly what they could have purchased if they walked into a saddle shop anywhere on the frontier between 1849 and 1900.
Adios,
Buck
(http://i21.photobucket.com/albums/b260/Buckstinson/DSC_0027-1.jpg)
-
Thanks, Buck. That does nicely. I like making my own stamps, too. I have one that is very similar to the center one of yours. I agree, close isn't really good enough. That's a fine holster.
-
The circle in the center was called a sunburst by old time saddle makers. The small flower in the middle, is an old store bought stamp made by Osborne. Tandy has one similar. In addition, there are four other individual stamping tools used to make up the sunburst and a total of eight four individual hammer strikes.
Adios,
Buck
-
Very nice, Buck. Excellent work.
-
Thanks. I like it. I can see I need to make a new stamp or two, now. ;)
-
I have been doing a little more sewing and a little less tooling lately. I like the looks of contrasting thread against the leather, so I have sewn in a pattern on the front of my new bandoleer holster for my R-M 51. Instead of the usual fold over holster I made a front and back. I could get more stitching in that way. Always looking for ways to improve my craft. Any critique is always welcome.
Thanks
Triggersmith
-
Kewel!! I really like the look!
-
Hey thats really cool!!! I have been toying with that idea, seeing as how I found some bright Orange thread awhile back. Did you just saddle stitch it or is it a different type of stitch? DM
-
Great holster, Triggersmith. I really like the half-flap design. The stitching really sets it off, too.
-
Thanks Gents. That is just a straight saddle stitch. I make my pattern just like I was going to tool. I groove it and use the stitch wheel then sew. I use my saddle awl at a slight angle to the groove, like the book says and got to it. It's a nice alternative to tooling.
Triggersmith
-
Triggersmith...great looking holster. I too like the stitching.
Dalton...where did you find the orange thread and what size is it?
-
My neighbor whose father used to dabble in leather, gave it to me. It looks like one of the smaller rolls of Tandy waxed thread or nyltex. Not sure what it is for sure, but it will contrast nice with black. DM
-
Howdy pards:
Well, I have finally finished this holster, which is a rendition of the Charlie Prince (Ben Foster) rig as designed and made by Will Ghormley for the 3:10 to Yuma movie. I took Will's 49er pattern and modified the mainseam then added the stitching and the spots. I have already started a cross draw verson and hope to have it done for next weeks shoot.
-
Hey thats sweet! Love the red lining, and the stitch work is to die for!! Dang got to get my bench cleared and get started now, lol. DM
-
Nice job Outrider, you captured holster real well , I like the red thread , and liner, nice design all around.. ::) :)
Ten Wolves ;) :D ;D 8)
-
Excellent piece of craftsmanship Outrider. Nice contrast on the stitching.
Triggersmith
-
That really looks good, Outrider. Nice work. I agree that the contrast is good. I may have to consider that for a pair in the future.
-
Howdy Outrider,
My compliments on another beautiful job. Excellent workmanship!
-
Thank you all for the compliments.
-
Looks very good! Nice work!
-
Hey Outrider,
That DOES look nice! It's such a simple design, but everything comes together to make a real striking holster. Great job!
Will
-
Howdy Pards:
Well, I have finally gotten the "Charlie Prince" crossdraw holster finished..it is cut for a New Model Vaquero 4 5/8" brl. While I was at it I did a matching gunbelt..so now I have a new rig to play with. If I have time next week I will make a matching shotgun belt. The main holster that I showed last week is cut for a New Model Vaquero with a 5 1/2" brl.
-
Outrider,
Ya gone an made me drool all over my shirt & keyboard! ::) :D ;) Real nice set!!
-
here is a close up of the crossdraw and belt
-
Howdy Outrider :D
You're a hard act to follow Pard , this rig is really nice , seems like your work just gets better and better, NICE JOB
Ten Wolves ;) :D ;D
-
That's a great compliment to the other holster. Congratulations on keeping the belt to a minimum. The temptation would be great to do stitching all the way down it, but this sets the holsters off better and the stitching on the belt is enough to make all three pieces a set. Good work.
-
I think my next personal project will be make a a rifle scabbard to match the 3:10 to Yuma holsters. What do you think of that idea?? ??? ??? ::) ::) ;D Think it would be worth the time ??? Geez after all I don't own a horse...but I do have three little Dachshunds ;D ;D :D :D ::)
-
Sounds good to me ,Outridder , you could always hang it on the wall, so people could enjoy it , or like you said , you could hang it on the three dogs , bet they would love that , don't ya know. ;D ;D ;D ;D ::) :o :o
Ten Wolves ;) ;D
-
I wore the "Charlie Prince" rig at a shoot today...worked out very well. I did farily well even though it was kind of cold...2 misses the entire match.
-
Howdy Outridder
Sounds like you had a good day, I bet you got a lot of compliments, on your new Charley Prince rig, I'll bet when you walked up to the table , they all backed away , Ye Ha, LOOK OUT he's here.. :o 8)
Aint this Cowboy Action Shooting Shooting a HOOT where else can you go and have this much FUN ;D
Ten Wolves ;) :D
-
Ten Wolves:
You got that right ;D ;D...one fellow said...oh no you did'nt...yeah ya did...you went and maid a holster like the ones that that "poor unguided soul" used in 3;10 TO Yuma. I said, POOR UNGUIDED SOUL...that fellow was totally unhinged..brain was stuffed in backwards :D :D :D ::)
-
Howdy Outridder :D
Sounds like it was a fun day , did anybody ask if you were going to make a Ben Wade rig next. I just have a feeling you're going to get this one done too , I can hardly wait , you could go to a shoot, and be Charley the first half and Ben the second half , that will really get um going , 8)
Have fun Pard :D ;D
Ten Wolves ;) :D ;D
-
Here is the last rig I made.
WC
-
Very nice cowboy! Looks very good. I assume this isnt your first Rodeo?!? Welcome to CAs City!! DM
-
Cowbot...great looking rig...I particularly like the "slim jim" styles :) and welcome to the L L & L forum (leather, leather & leather) ;D
-
Hey WC,
Ten Wolves said your gear was grand. He wasn't fluffin' none. He mentioned we met once in Wyomin', but I've been hit in the head a couple of times since then. I see ya' standin' in front of Al's toolbox though. I tried to make the photo bigger an' see if it jogged any memory cells, but no such luck.
Hope to see more of your gear in the forum.
Will
-
Great work, Cowboy. Like Outrider, I also like the slim jims. The design you put on them really works with the flowing lines of that style holster. Thanks for sharing with us. Be sure to put up other stuff for us to enjoy.
-
Howdy Will
We met in Winterset, Iowa at the John Wayne 100th. I introduced myself after the Cowboy Church.
I had the Tooled Saddle Bags.
WC
P.S.
Here is a better pix, might jog the memory.
-
YEAH! Now I can place ya'!
I told you at the time you didn' have to hang your head on account of anyone's leather work. And what a great weekend that was at John Wayne's birthplace. I don't get out much to go to leather shows any more, but I'd go just about anywhere if I got the chance to talk with Cowboys about our Creator. It's good to see you again, here in the Forum.
Will
-
Cowboy
I have not met you, but those are one heck of nice set of saddlebags.
-
Outrider
Thank you.
Those are my carry-on bags when I travel. I made them to carry my lap-top and stuff so I don't have to carry
an extra bag. Worked out great.
WC
-
Howdy Gents
Will I'm sorry I got the location of Cowboy WC's meeting you mixed up ???, ya think maybe I might of got kicked in head too ???, in my head I thought it was the leather show, guess I had one of those sinorita moments don't ya know . Anyway it's great to have my Pard Cowboy WC here at the forum , he's quit an artest, and I know we will enjoy having him here on the forum, just like you and the rest of the pards, he has a lot to share. and arn't those great looking saddle bags.. :o ::) :D ;D
Ten Wolves ;) :D ;D
-
Very nice work, Cowboy. Happy you joined us here.
-
Seems we have sort of a guild here. Alot of very talented pards in here for sure. :D :D
-
I guess I'm not just a gun butcher. I do abuse other types of material at times. here are a couple of knives and sheaths I have made. ;)
-
:o Oops I will try this again for the second picture. :-[
-
Howdy Gun
Nice work , did you make the knives too, they both look great and period correct, Welcome to the forum ;) :D
Ten Wolves ;) :D ;D
-
Thanks Ten wolves, Yea, the knives are some of my foolin around. Like a lot of the pards on here I am an ol' ex buckskinner and you tend to learn a lot of skills doin that.
-
Nice work, GB. I like the way they set off the traditional look of your knives. Keep it up, pard.
-
Here is a set I've been working on for a while in between orders.
I still have to make the crossdraw and belt. May make a knife sheath also.
WC
-
Those look good, cowboy. I like the background with the swivel knife lines (at least that's what it looks like). The border looks nice with the reversing direction at the top. I'll remember those ideas for some time when I want something a little different.
-
Real nice work cowboy.
Regards Buff
-
WC,you did it again you're an arteeeest in your on right, can't wait to see it all together ::) ::) ;D
tEN wOLVES ;) :D ;D
-
Howdy
Thank you all for the kind words.
Marshall that is checkering done with the swivel knife.
WC
-
Marshall that is checkering done with the swivel knife.
That's what I thought. I've done similar, but not that detailed.
-
Heres one i made for fast draw. it is a little modified but mostly just stretched the bejesus out of it. and cut down the front alittle.
http://i45.photobucket.com/albums/f53/john4645/IMG_1273.jpg
-
That's really nice. I like those slim jim's. That one really has an authentic look to it. I like the dark brown, too. Good work.
-
All,
Thought I'd post a few old west related things I've made over the years though the stuff adds up and the canvas wasn't quite big enough to fit it all. I took a picture of some of the classics you might recognize from Packing Iron and a couple other sources.
Gotta love leatherworking - a labor of love. I didn't know how much I missed it until I was deployed a couple of times and couldn't make things for awhile.
I like much of what I see here posted from everyone, especially the artistry. Good stuff.
(http://img.villagephotos.com/p/2007-4/1252580/leathers2.jpg)
YMH&OS,
Brass
-
Howdy Monterrey' Jack Brass
Pardner you've done your home work , nice collection , and well made , everything looks period and old, looks right out of Packing Iron, or the 1800's , My hats off to ya Pard ;D And pard I hope your not deployed any more , and that your home to stay, I want to see more leather work from you . :D 8)
tEN wOLVES ;) :D ;D
-
Nice work, pard. Great collection of stuff. You did a good job on all of them. Thanks for sharing.
-
10Wolves5Shooter & Marshall W.W.
Not worried about deploying again but am glad to have served and it's great to be back for almost a year & 1/2.
Thanks for your kind words regarding my stuff. I only putz around with leatherworking, it's nothing professional but I try to get the right look by using simple techniques from what I have seen on some original pieces and by looking closely at pictures. As most of what I copy is simply constructed the results follow pretty close.
I also use period tools on most of what I make - got lucky about 10 years ago and found a complete saddler's tool set and have added a couple of pieces over the years. Most of the set is C.S. Osbourne and I pictures it below. Good thing the images I'm posting were already stored on my computer as it's a pain to lay this stuff out quickly for a picture...!
(http://img.villagephotos.com/p/2007-4/1252580/leathertools3.jpg)
YMH&OS,
Brass
-
Wow..that tool set is awsome. I would love to find something like that for sure. Even though Chattanooga was famous for saddlery's (three still in operation) and tanneries...those types of tools are hard to find around here.
-
Those tools are truly outstanding. I love things like that. Heck, the toolbox alone is a great find. To have it full of original tools is a heck of a bonus. Being able to use those tools is the best thing that can happen with them. Thanks for posting the picture. Many thanks.
-
Boy Pard you're not foolen around are you , NICE SET :o :o ::) ??? ;) :D ;D 8)
tEN wOLVES :D ;D
-
Indeed!
What a nice set of tools. From the photos you've posted, you do nice work with them as well.
Jim
-
Hey, Brass. Good to see you here. Missed you and James at Convention.
Very nice work there pard.
I had a similar situation many years ago. Though not as nice an outfit as yours, there was an old leatherworker in these parts who passed away back in the '70s and left his whole kit to a horse-lovin' friend of mine. After storing and moving it about for a couple of years, she finally decided that she was never gonna use the stuff and passed it on to me. I still use those tools to this day. I've repaired his kit box a half-dozen times and of course, added to the collection, but there's a special feeling I get every time I open up that box and pull out that old man's tools.
KInda makes me feel like I have to do them/him justice if you know what I mean.
-
Fellows,
Yes, I am rather lucky to have found the complete kit and if my memory serves, the price for the whole set at the time came out to something over $4.00 per piece in the set (including the box). So I didn’t mind forking over the cash to that antique store for the goods. It is fun to use those tools – too bad I really can’t do them the justice they deserve.
Another picture is posted below. It is a hunter’s companion I based on the one pictured in Encyclopedia of Buffalo Hunters and Skinners E-K by M. Gilbert. This is the only other picture I have on hand of anything I’ve made.
Repo hunter’s companion. Also in picture are: sharpening steel, sticking & skinning knives; butcher knife and sheath (sheath based on one I saw in an 1872 tintype); round-head knife; hide hooks
(http://img.villagephotos.com/p/2007-4/1252580/companionrepo.jpg)
Original hunter’s companion used in 1881-82 by J. R. Edwards who hunted buffalo in Montana (shown on page 4 Encyclopedia of Buffalo Hunters and Skinners E-K by M. Gilbert, 2006)
[Deleted by moderator - Link lost, photo moved or deleted]
YMH&OS,
Brass
-
Here are a couple of photos of my latest project. Looking back I see I posted the photo of the right hand holster just over 2 years ago. When I got a matching pistol last fall I decided I needed a complete set of gun leather for it. I've learned a few things in the intervening time but unfortunately I didn't get the antiqueing to be quite as close a match as I'd hoped.
(http://img136.imageshack.us/img136/2004/1012330it8.jpg)
(http://img136.imageshack.us/img136/9625/1012331hi9.jpg)
-
How Do Pitspitr
Boy Pard, did you sit down one night , and say to yourself , self I'm going to make a beautiful ,Fancy rig that nobody else has , will I think you did it , you really did a nice job here , your tooling is perfect , and it's different , it really looks sharp, sort of a BBQ type rig . :D ;D 8)
tEN wOLVES ;) :D ;D
-
Nice hunter's companion, Jack. I like it. Cool the way they simply stick the steel out the bottom. I'm not familiar with them so they're new to me. Thanks for the introduction.
That's first rate, Pitspitr. You chose a nice parttern for it and did the pattern aligned with the fold in the holster and on the belt the same. Many people do basket weaves at an angle so any errors don't show as much. You did extremely well putting it on the hardest possible way. Good work.
-
Now Colonel, that is one fine looking rig! Might look funny with your uniform tho! Wow, that does look good tho. DM ;D ;D
-
Howdy Pal
That's a really nice job on the holster. Picture does not do it justice.
WC
-
Howdy Gents
Will thanks to a lot of Pards , and my 87 year old Mom encourageing me to try carving, which I haven't been able to do , because of a injured left hand, and I'm left handed,my Mom wanted me to make her a small purse , so I couldn't say no to Mom, so I got one of those kits from Tandy which I already had a gift certificate from Christmas, so I did my first ever leather carving, useing a swivel knife, also for the first time, I went slow , and had to rest my hand several times along the way, BUT I DID IT , next I wanted to do a Cheyenne holster , with a flower design,I used Will Ghormely patern for this, and altered it a little bit, I shortened the skirt, and dropped the top of the holster down a couple of inches from the top of the belt, and put a slit mussel to the rear cant, I used 12 to 14 ounce saddle skirting that I got from Cowboy WC in his store , Standing Bears Trading Post, so this is a real sturdy holster, I had to skive the loops to make them a little easier to get the body of the holster through them, and it worked just fine, so heres the pictures
tEN wOLVES
-
Ten Wolves, that is fine looking for a first time carving! Holster looks great too! DM
-
Thanks Dalton
I can't tell you how good it makes me feel to be able to do this now , it's opened up a whole new adventure in leather for me , and thanks Dalton for the kind words Pard :D
tEN wOLVES ;) :D ;D
And you to Cowboy WC, I appreciate it Pard ;D
-
Moms have always liked the gifts their kids made the best, and 10WF, you really must've put a big smile on her face with that purse. Good for you both!
BP
-
Heres my newest project for a knife I picked up last sunday. It is handmade cable damascus by a gentleman in Smith Center Ks. Bought it needing to finish the grip and the guard.
Wanted a smaller blade to carry at work if I so choose.
-
Nice work, 10W. It's nice to go back and look at your first stuff. That purse was a good one. It looks much like the second thing I ever made which was a checkbook cover for my mom. I guess that isn't uncommon. ;D Nice work on the holster, too. I don't have any examples of my first holsters. Wish I did. I do have other things, though. Thanks for sharing.
Dalton, that's a good-looking sheath. I like simple designs that work. Thanks for showing it to us.
-
Ten Wolves:
All I can say is "THAT A BOY"...the purse and the holster look really good. You stick with it and you will see that with practice your carving will improve each time you do it. If your hand starts to bother you...put the project down for awhile..it's not going anywhere until your done with it. Good job pard.... ;) :)
Yesterday at our monthly shoot they used an old false teeth rigging frame as part of the scenario...what a blast...thought I would show you what they look like
;D ;D ;D ;D ;D ;D ;D
-
Hi Guys, Sorry for the tardy replies, I had the flu all last week and it's been kicking my butt.
That's first rate, Pitspitr. You chose a nice parttern for it and did the pattern aligned with the fold in the holster and on the belt the same. Many people do basket weaves at an angle so any errors don't show as much.
That's one of the things I learned since I made that first holster (It was my very first attempt at basketweave stamping). However; if I was going to use that first holster it meant I was going to have to do the rest of the set the same way.
Boy Pard, did you sit down one night , and say to yourself , self I'm going to make a beautiful ,Fancy rig that nobody else has , will I think you did it , you really did a nice job here , your tooling is perfect , and it's different , it really looks sharp, sort of a BBQ type rig . :D ;D 8)
Thanks Ten Wolves, The rig did turn out pretty photogenic. Never really thought of it as a BBQ rig but I guess it'd work for that :) I am actually thinking of having my 3" Schofield turned into a BBQ gun and making a fancy shoulder harness for it. I recently got stamps that will allow me to replicate the stamping on my 1880's Collins/ Morrison saddle and am thinking that I might decorate that holster that way.
Now Colonel, that is one fine looking rig! Might look funny with your uniform tho!
Thanks Dalton, Your right it would look funny with the uniform, I suspect it won't get worn that way much. The plan when I made the original holster was that it was for my son (we share the same initials) but my wife nixed that idea, so for now we share pistols. He'll end up with it eventually. While he's a pretty good historian too, he's less into the military history and just likes to shoot cowboy guns fast!
-
10W You know, that's one of the nice things about leatherworking, It's therapudic and I'll bet you mom would'nt have been any happier if you'd bought her a new house!
DM Nice knive sheaths!
I'm working on one now too, but I haven't touched any leather since monday. I don't think it's going to turn out as nice as your's, but I guess it'll work. BTW I saw your mark in the other thread, looks good!
-
Moms have always liked the gifts their kids made the best, and 10WF, you really must've put a big smile on her face with that purse. Good for you both!
BP
Thanks BP, Moms tend to like what their kids make for them , in her eyes I can do do wrong.
tEN wOLVES ;) :D ;DNice work, 10W. It's nice to go back and look at your first stuff. That purse was a good one. It looks much like the second thing I ever made which was a checkbook cover for my mom. I guess that isn't uncommon. ;D Nice work on the holster, too. I don't have any examples of my first holsters. Wish I did. I do have other things, though. Thanks for sharing.
Thanks Marshal Will Wingam, I didn't to go back too far for the purse , I made that a month ago , This is what's nice about these new cameras, I can store all my stuff in the PC now, and bring it out when I want it , I also use some of these pictures as wall paper on my PC.
tEN wOLVESTen Wolves:
All I can say is "THAT A BOY"...the purse and the holster look really good. You stick with it and you will see that with practice your carving will improve each time you do it. If your hand starts to bother you...put the project down for awhile..it's not going anywhere until your done with it. Good job pard.... ;) :)
Yesterday at our monthly shoot they used an old false teeth rigging frame as part of the scenario...what a blast...thought I would show you what they look like
;D ;D ;D ;D ;D ;D ;D
Thanks Outridder,
You were right Pard , when you said to me a year ago , and quote, ( give yourself time and you will be carving just like the rest of us ),I never forgot that Pard , and now I know the fun and joy in doing this. ;D and I like the false teeth ringing thing , looks like fun.
tEN wOLVES
10W You know, that's one of the nice things about leatherworking, It's therapudic and I'll bet you mom would have been any happier if you'd bought her a new house!
Thanks Pitspitr
Your right, Mom couldn't have been happier, she right away went to show her friends , and pard , about be therapudic , thats how I got started in this , two years ago, Cowboy WC, persuaded me to give it a try , and that it would be good for my hand, so I did , and boy howdy was he right , and I'll always be gratfull to him for that. :D
tEN wOLVES ;) :D ;D
And Dalton
Pard that is a nice knife sheath, and good looking knife , you were lucky to fine it , have you ever thought about makeing your own knife , I did one of the kits not long ago, and it was a lot of fun, and the knife came out nice too, anyway you did good pard, and the knife looks real good in the sheath ;D
tEN wOLVES ;) :D ;D
In case anyone wondered why I sign my handle like this with the caps messed up , it's because since I've been doing this when ever I sign off , I always get the caps backwards , so I finally just gave into it , and now I don't go back every time to correct it .. JUST IN CASE YOU WERE WONDERING , im mixed up that way.]
tEN Wolves ??? ::) :o ;) :D ;D
-
Howdy Dalton
I'm back again , I forgot to ask you on my last post, I've been looking at your knife and sheath, is the handle maple , it looks like some sort of burl, of some kind , is the blade about 3 1/2" long, the reason I'm asking , I'm going to be making another knife here in a few more weeks , I 'm going to get my material from Crazy CRows Trading Post, and I'm thinking of making a knife similar to yours , I don't know if I will be able to find the wood I'm looking for, I like the long full handle , on a short blade, being in the meat business , all the years that I was , I always had a few favorites, and a knife like this was great when it came to boning out beef necks , so I would like to make one similar to that but more period , with a nice handle, and carbon steel blade. you did a nice job on the sheath , and thats a great way to carry it . I don't plan on boning out anymore beef necks , but I always liked the way that short blade full handle felt .
Take care Pard
tEN wOLVES ;) :D ;D
-
Yes TWF, it is just over 3 1/2" from brass to tip and is birdseye maple. Use leather dye (medium brown on mine) to stain the wood. It penetrates very well on maple. Thank you for the compliments on the sheath. I am proudly wearing it to work as I type. DM
-
Hello Dalton
Thanks for the reply and information :D
tEN wolves ;) :D ;D
-
Howdy All,
I have attached a picture of my replica from page 79 of Packing Iron. I shoot 51 Navy Conversions, so this will be for my right hand even though the recurve is cut on both sides!
Thanks,
Panhead Pete
-
Howdy panhead pete
you did a real nice job pard, it looks like you even put a toe plug in , looks good ;D 8)
tEN wOLVES :D ;D
-
Howdy Ten Wolves,
Thanks for the kind words. I have yet to master the perfect stitch spacing on the bottom of the toe plug, but I am getting there.
Happy Trails,
Panhead
-
Stitch spacing off, ya say? Balderdash. Y'all do great work. Creative, obviously fulfilling.
OK, pards, so give it to me straight. I can take the truth. I'm just startin' out. How long ya give me before I give in to the urge to give this a whirl? What's the prognosis? I think I may have it bad. But I'm lookin' for a second opinion.
BP
-
It may be terminal BP. You may as well grab a handful of tools and some old dead critter and get to work! Welcome!
Nice job on that holster there Panhead! Looks good, and so does the spacing! DM
-
Good job, Pete. It's good that you put the toe plug in. It really makes it look right. Good color for it, too. Keep 'em coming.
OK, pards, so give it to me straight. I can take the truth. I'm just startin' out. How long ya give me before I give in to the urge to give this a whirl? What's the prognosis? I think I may have it bad. But I'm lookin' for a second opinion.
Yep, you're hosed. Ya better go for it because there's no turning back, now. The only way through this crisis is to give in to it.
-
hOWDY GENTS
Panhead, your spaceing looked fine to me , but thats just part of it , the maker always see's things other people don't , and thats because you now have a personal relationship with this holster, I'm the same way with everything I make , it drives me crazy sometimes , but I love it . :D
tEN wOLVES ;) :D ;D
Howdy BP
I give you 6 months at the most ??? ::) ::) :o 8)
tEN wOLVES ;) ;D
-
Hey there PHP, nice to see you here. I'm not too active on CAS City though this is a board I check when I can. Neat stuff and nice people.
To everyone here, Panhead Pete is a helluva leatherworker and if he's not too modest (hint, hint) might post his website address.
Also, hello again BP - making leather items is addictive and I highly recommend you try it - my guess is you'll have a great time making good stuff. Also nice not having to pay the big bucks if you can make what you need with your own embellishments and documentation. Post a picture of your first project.
YMH&OS,
Brass
-
Nice job Panhead.
Looks like authentic, quality craftsmanship.
-
Thanks for the nice comments Irish Dave!!
BP,
Go for it Amigo!! I started out in the early 90's. I went to the Tandy store to get leather paint for my biker jacket, then I saw plans for a nice big saddlebag set for the Sportster, bought a western holster pattern in the mid 90's and sort of got out of it. I FINALLY bought my first single action in 2003. I can't stop messin' with hides ever since!!
Happy Trails,
Panhead Pete
-
Howdy BP
Go for it.
I started over 20 years ago, left my job a few years later and started my custom business and have not had one day
since that I've woke up and said I don't want to go to work today.
Once you start buying tools you'll get hooked and then won't know weather to buy more guns or leather tools. :)
WC
-
WC,
You have an awesome collection of tools, Sir!
Your talent and your collection are a good match, indeed!
I see you have handles for your stamping tools! I have thought about using a handle to keep my hands from cramping or getting sore. Very clever how you have a rest for the tools you are using as well. What did you use for handles, if I may ask?
Happy Trails,
Panhead Pete
-
This is a pair of chaps I made about 5 years ago. It is the third pair I have made. I made the pocket buttons from a ashed antler I found in the woods.
-
Howdy BD
That's a good looking pair of chaps.
WC
-
Howdy Pete
The stamps all come with the handle made in. The only stamps that I know of with out handles are 3-d
stamps and embossing plates
WC
-
Howdy WC,
I agree, that is a fine set of chaps Bull put together. What I thought you had (under the mallets in the picture) were wooden handles over the shafts of your stamping sticks or stamping tools if you will. Perhaps I am seeing something else. An admirable collection, I must say!!
Happy Trails,
Panhead
-
Nice Chaps, pard. I like the way you made the pockets. If you have a close-up of the buttons, please post it. Good work, thanks.
-
hOW dO gENTS
I just wanted to share my latest project, my neighbor ask me if I could make him a leather holster for his 44 Mag. Mountain Gun, with a 4" barrel, so I said sure , why not , he wanted it to look like it had been around, not plastic looking, and he wanted it to be able to slip over a 2 1/2 to 3" belt, but also a pant bellt in 1 1/2", and not slip around, and with a grip forward cant, and a strap snap closure, and not a high ride because he likes to ware his belt high, and the high ride wouldn't work well for getting out his gun, so this is what I came up with.
tEN wOLVES ;) :D ;D
-
Howdy BP
Go for it.
I started over 20 years ago, left my job a few years later and started my custom business and have not had one day
since that I've woke up and said I don't want to go to work today.
If I ever hear that you've lost that sense, I'll track you down & slap you myself. Good for you. I've been self-employed and worked in a cube farm for a big corporate beast. Great coworkers and usually pretty satisfying work. Just not quite as cool as what you do, you lucky *&^%$# ! ;D ;D ;D
Once you start buying tools you'll get hooked and then won't know weather to buy more guns or leather tools. :)
WC
I see by your outfit that you're the ghost of Christmas future. This is all just too cool... 8) I know I'm about to set up another Excel tab in my catalog of wants/needs - "Leather Crafting" and set a budget. Budget? Yeah, right...
Step 1 - Clean out area in basement for work shop...
Folks, this is do-able. Y'all remember what it was like when you first did it? That'll be me some day, hopefully. Like I said: This is all just too cool... 8)
Thanks, everybody, for sharin' your addictions, er, enthusiasms. Really great lookin' work and 'tude. Keep 'em comin'! :P
BP
-
Howdy BP
You just bypassed my latest Project , go back go back go back, we must have posted at the same time ::) :o :(
Tell me what you think ???
tEN wOLVES ;) :D ;D >:(
-
...we must have posted at the same time ::) :o :(
I know what I'm doin' 'bout this time most days... ::)
Tell me what you think ???
It's great. Double stitching. Seems I've heard mention made of that as I've just recently started paying attention to the leather shop. I am confused by one thing, though. What are those new fangled contraptions these hoslters are designed for? Are you from the future? ??? ;D ;D ;D
-
Ten Wolves, thats a pretty good looking "used" holster! I like that style a lot! DM
-
Howdy BP
Yea , thats deffintly, from the future, I thought I would double stich this holster, just to make sure everything would stay together, my neighbor goes to Alaska, and has to sometimes deal with the Grizzly community, he wanted something that would stand up to the brush and wilderness, so I gave him a closed toe just in case he has to slide down a mountain , or some snow pack, so I'm hopeing he will like it , and it should stand up real well for what he wants it for.
tEN wOLVES ;) ;D :D
Hello Dalton ,
Thanks for your comments Pard I appreciate it . :D ;D
tEN wOLVES :D :D ;D
-
Howdy Panhead
Now I understand what you were seeing. That rack is an old cigar shipping box. The rows were too deep for
my stamps so I cut dowel and put them at the back to space the tools out to the end.. My factory "Job Rack"
didn't hold enough tools.
WC
-
TW
That holster came out great. You make me proud.
WC
-
That holster has exactly the aged look you were going for, 10W. The double belt size slots and loop is a nice solution. Very nice.
-
Howdy Gents
Thanks WC, you know I had a Good Teacher and Mentor ;) :D ;D
Thanks Marshal Will Wingam, thanks for kind comments , it's really appreciated Pard :D
tEN wOLVES ;) :D ;D
-
Ten Wolves:
Great looking holster pard....that ole 44 won't comethrough that mainseam with the double stitching...nice wrok...keep it up pard ;) ;D ;D
Hey WC...Ten Wolves is coming along great with his work don't ya think???
-
Outrider
Yes he is. He makes me proud......
WC
-
Howdy Pards
Will now that I have a swelled head from these really nice comments , I'm going to put some ice on my head to get the swelling down , (LOL) just kidding , but I do want to thank all of you , Marshal Will Wingam , Outridder , and Cowboy WC, it's having Pards like you, and all my other Pards, that is an incentive, to all of us , be it a beginer or some one thats been doing this for a while , It's a nice feeling to have you Pards take the time to look at our leather work , and then write your comments . :o ??? 8)
You all have a great day , and Thanks Again
tEN wOLVES ;) :D ;D
-
Here is my new Walker holster using woven leather strips in the front. This holster is setup to use in my bandoleer shoulder rig.
The weaving is kind of tough but I sure like the results.
All comments are appreciated.
Trigersmith
-
Now Triggersmith, that is a neat idea! I like your thinking! Make sure you post a pic of the shoulder rig when you have it installed! Looks good!!
DM
-
hOWDY tRIGGERsMITH
Wow Pard your holster is awsome , what a great idea , did you do your weaving first and then sew it to the front of the holster, and then trim , it's looks great , like Dalton said we sure would like to see a picture of the finished shoulder rig . ::) :o 8)
tEN wOLVES ;) :D ;D
-
Thanks Ten Wolves. I figure how I want the lines to run square to the edge or at an angle. I lay out the strips on a board and tack down my master strips and then weave. I then wet it down and push the strips together and make sure everything is correct. I lay the cutout that I am going to fill and mark the outline on the weaving so I know where to apply my Barge cement. I apply the cement to both pieces and stick them together. When that's dry I sew around the border and trim off the excess strips. Dampen the border and use a bone folder and flatten down the edges. I then apply my liner if I'm going to use one.
It's time consuming but it's fun and looks very cool.
Triggersmith
-
It also looks rugged and heavy duty. Solid. Real nice.
BP
-
Thanks Ten Wolves. I figure how I want the lines to run square to the edge or at an angle. I lay out the strips on a board and tack down my master strips and then weave. I then wet it down and push the strips together and make sure everything is correct. I lay the cutout that I am going to fill and mark the outline on the weaving so I know where to apply my Barge cement. I apply the cement to both pieces and stick them together. When that's dry I sew around the border and trim off the excess strips. Dampen the border and use a bone folder and flatten down the edges. I then apply my liner if I'm going to use one.
It's time consuming but it's fun and looks very cool.
Triggersmith
Howdy Triggersmith
Thanks for the explanation, I'd like to give this a try sometime, Thanks for sharing :D
tEN wOLVES ;) :D ;D
-
TS:
Very unusual and interesting concept -- and nicely done.
Wasn't sure at first, but it's growing on me. The more I look at it, the more I think I like it. I tend to like stuff best that looks like it came from the Old West era. This has an interesting and different, but to my eye, a good "period look" about it. I too look forward to seeing the final assembly.
-
that's a fine holster, TS. I like the effect you get with the real weave. Most of us are happy doing a good basketweave stamp but this is a dimension or two beyond that. Nice. I see double stitching around it, too. That adds to the overall look as well as giving it more strength. I'm curious to see the finished product, too. Thanks for posting it.
-
That's a great looking holster with the real weave.
WC
-
Hi Guys thought i would share some pics of stuff ive made, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/Makerunknown1875page100PackingIronG.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/KellerGroeE-Mail-Ansicht.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/FAMeanGroeE-Mail-Ansicht.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/IMG_0758.jpg)
-
Wow, Don101. Those are awesome.
-
Irish red are you a lefty?
-
Very nice, indeed, Don.
Fine work.
-
You are truly an artist Sir. Beautiful work.
Triggersmith
-
Howdy Don 101 :D
Like my Pards say, this ain't your first Rodeo, this is some beautiful work , the leather lookes like it is soft like butter , very rich looking on the holsters , the top holster is a nice copy of the one in the book, nice work all around. :D :o ::) 8)
Thanks for sharing this with us Pard :D ;)
tEN wOLVES ;) :D ;D
-
Howdy Don
Very nice indeed.....
WC
-
Howdy Don101
Great leather work for sure. Where are you located in Germany. I have a very close friend from the Neidersachen area (Bad Bodenteich
-
Howdy Don101
Great leather work for sure. Where are you located in Germany. I have a very close friend from the Neidersachen area (Bad Bodenteich
Hi what a small world im about an hours drive from there Visbek near Bremen
-
I made this today for our up coming anual Buffalo Hunters Camp this weekend, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/IMG_0828.jpg)
-
Hi Don:
Yes...small world my friend he lives in Bad Bodenteich but his factory is in Reinstorf (Luder) name of the company is MBK Maschinenbau Koetke, and he manufactures Blow Molding Machinery. At one time I was an honorary member of the Reinstorf shooting team. I have not been there since 1995 when I attended the K95 Plastics Expo in Dusseldorf. Also, I have a slight attachment to Bremen...my great grandfather shipped out of Bremen to live in the states back in the 1800's, so I kind of have some family ties as well
-
Outstanding work, Don. I really can't say which piece I like best. They're all great. Thanks for sharing them with us.
-
Hello Don,
Nice work, Amigo! Welcome to the forum. I had the opportunity to see some of Germany on a military deployment. It is a beautiful country, indeed. I like to describe it as Pennsylvania with castles for those on this side of the pond. Keep the photos coming, they are an inspiration and give us some fresh ideas.
Kind Regards,
Panhead Pete
-
Here is another new holster I made on Wednesday. I will make the right hand one next week. The spots are brass but don't show up well in the photo.
-
Howdy Bull
Looks like you made another beauitful holster , but the picture doesn't do it justice, nice job Bull ::) 8) I like the spots , are they solid brass , or plated ?it really set it off . :D
tEN wOLVES ;) :D
-
Thanks. I guess the spots are plated. I got them out of the sale bucket at Tandy in Benbrook, Texas this week.
-
Nice work, Bull. I agree with 10W, the spots work well on it. Nice job on the design, too. All-around great holster.
-
Howdy Bull
That really looks nice. wish it was a better picture.
WC
-
Is this picture better?
-
Howdy Bull
Much better pix.
Great job, good lookin holster
WC
-
Howdy Bull
This picture is much better , you really did excellent work on the tooling , it has wonderfull depth, and I like your flower design, the extra border lines bring out the skirt , along with the brass spots, you really put some thought into this holster Pard , I really like it ::) :D ;D :o 8) O h yea, you must be a lefty like me , seems like us leftys seem to think alot alike , I don't know why that is. ???
tEN wOLVES ;) :D ;D
-
Thanks ya'll. Sorry Ten Wolves, I am right handed. I am going to make the right hand match next week. Maybe great cowboy minds think alike.
-
;) :D ;) :o ::) :-[ I guess that must be it Bull ;) :D
tEN wOLVES ;) :D ;D
-
Got back from a long vacation recently and just had a chance to take a good look at the projects posted here in the last month.
Boy, I gotta say there is some beautiful work being done. The workmanship and designs are excellent. My compliments to everyone. I'm proud of you all.
-
Hi Johnny:
I was wondering where you had gotten off to. Welcome back to the forum.
-
Howdy Pards:
Here is a belt that I just finished for a pard of mine. I used a mixture of the cherry stain and brwon stain then coated with tan cote. The buckle....geez what else the "Ghormley Special" ;D ;D ::) ::) ;D
Also a picture of the new Greyghost maker's stamp...not sure if you can see it but...
-
Howdy Pards
Its good to see you back Johnny, we missed you here at the forum , hope you had a good time Pard. ;D
Hello Outridder
Your belt looks great , and I like the color , and to top it off with Will Ghormelys Buckle , really finishes it nicely, it looks like Jeff at Grey Ghost , did a nice job on your stamp, it fits right in there, and looks period too, I just got mine a few days ago myself and I really like it, Thanks to Cowboy WC for telling us about him . I ordered some stains from PEAS & CORN, again thanks WC, for letting us know about this supplier, I should be getting them in the next few days , can't wait to fool around with them , kinda like a Frankinstien thing, if'n you know what I mean , that's just another fun part of leather work that I love doin, I also did a gun belt with Wills buckle , Ill have to get a picture and post it , these buckles are really top notch. :D ;D 8) I got a picture here it is
tEN wOLVES ;) :D ;D
http://greyghostgraphics.com/ http://www.peasandcornco.com/shoeandleathercare/index.asp
-
Great work, pards. I like the simplicity of Outrider's and the richness of 10W's with the full insert. The holster looks good with that belt, too, 10W. Outrider, that stamp really does set off the rest of the belt. Nice touch. It's nice to see Will's buckles being put to use already. Both belts really compliment the buckles beautifully.
Welcome back, Johnny. Good to see you again.
-
Many thanks for the kind words Pards...
I'd like to echo Marshall Will's words to Outrider and Ten wolves. That is beautiful and inspiring work!
I was in Arizona visiting then did some skiing at Taos and Santa Fe Basin. On the way back we stopped at the Cowboy Heritage Museum in Oklahoma City. Lots of interesting displays and exhibits to look at. I don't know anything about horses but among other things, this museum had a very impressive collection of saddles to look at.
Please excuse the lousy pictures as I had to retrieve them from my Video Camera.
-
This is a rig I made to practice and experiment with. I wanted to try putting shotgun shells on the holster belt. I don't know if this will be practical or not. I also wanted to try some decorating with stiching. The loops are made out of cotton webbing that I dyed.
The holster shown in the pictures will be used as a cross draw for my Richards Mason with a 4" barrel. I am finishing a matching strong side holster for a RM with a 7-1/2" barrel.
I seem to get a little sloppy and rush too much when I don't do leather-working for a while. I have to remember to slow down and think before going to the next step.
-
HOWDY DO Johnny
I'd say your holster turned out real nice, I have an old Alfonso Penada rig with that pattern on the gun belt , I always liked that, your webbing looks good too, let me know how you like having your shot gun shells on your gun belt.
Take care Pard , good to have you back :D
tEN wOLVES ;) :D ;D
-
Johnny, where did you get the cotton webbing?
-
Howdy TT,
I bought this Cotton Webbing from a mail order company in Indiana called Jas. Townsend & Son Inc. The link to their website is https://www.jas-townsend.com Look under "Goods-Fabric". You can buy this webbing by the yard and they ship orders real fast.
I bought several sizes. I used 1" heavy for the .38 special cartridges and 1-1/2" Heavy for the 12 ga, shells.
The Medium weight seemed a bit on the flimsy side. The color was pretty light so I dyed the webbing before I used it with Ritt Dye.
-
Good rig, Johnny. The shotgun loops on the belt really work nicely. I did that with my most recent rig and it is way better than slides. More correct for the era, too. Thanks for the photos.
-
I would like to show a holster I have just made . Ihave tried to make it look antique and designed it my self.
-
Howdy
Great job. It does look antique.
WC
-
Howdy Colemanjack
You did a nice job pard , good design and definitely antique looking I like that you put a large skirt on the back , and a modest, amount of border stamping, looks real PC, and so does your gun. ::) 8)
tEN wOLVES ;) :D ;D
-
Howdy Colemadjack,
That is one nice piece, Amigo!! How did you antique it? I agree with Ten Wolves regarding the border stamping.
First class leather, all the way.
Panhead Pete
-
Hi Guys,
Thanks for the kind comments . To get the antique look I mixed a suede dye with oil and applied it with a small brush working in small circles untill I got the effect I wanted .It worked out fine.
-
I think you achieved your aim. Nice job, pard.
-
Good job, Colemadjack. The finish on it really looks original. Nice work. The simple border design works well and really adds to the overall antique appearance. I've been offline for a couple days and that was nice to come back to.
-
OK pards, it is time to show off your talents. I would like to see pictures of holsters, belts, sheaths, etc.... that you have made yourself. Let's see what ya got!!!!
Howdy
I'm in the middle of building my second saddle. The first was a kids pony saddle. This one is not period
but I thought someone might like to see it. I'm going to enter in the saddle contest in May at the Sheridan
Leather Show.
WC
-
I like it, pard. Nice saddle. Good diamond stamping on the horn. Thanks for the pics. Let us know how it goes in the contest.
-
Howdy WC
That saddle is taking shape real well, I'm going to have to stop in and take a closer look :o ::) 8)
tEN wOLVES ;) :D ;D
-
I know I posted a pic of this on my other post, but here we go. My newest rig for my Rugers. Made from Wills Cheyenne pattern, and copied from a holster in Packing Iron, with the addition of spots.
Belt is made not to match, as I will wear it with other holsters as well. Also, I dont think there were a lot of matched rigs back then anyhoo.
Used Wills brass buckle to match the brass spots. DM
-
That looks really good, Dalton. The border design on them is really appropriate. Nice rig. Will should be proud to see one of his buckles in use, too. Nice work.
-
Dalton, I thought I was loseing it for a minute, I just posted on your work down below, but now that i'm here , i'll say it again , WELL DONE ,Pard, you're becoming a real artest ;D
tEN wOLVES ;) :D ;D
-
I don't consider myself a leathersmith, exactly, but here's a recent project that I'm purty proud of. It's a boot/belt scabbard for a knife that I picked up for less than $10 at a recent gunshow.
[links broken - deleted by moderator]
Whadda y'all think?
-
Daniel, that looks like a pretty good sheath there! Nice work! I wish I had the patience to do that lacing. :-[
Nice knife for a good price too! DM
-
Howdy Daniel Nighteyes
Nice work , good job on the lacing , and I see you put a button on it , I guess you're going to wear the knife between your pants and your gun belt , it should stay put, and that was a good price on the knife, thanks for sharing ;D
tEN wOLVES ;) :D ;D
-
Nice work, pard. I like the laced edge and the diamond spots. Thanks for sharing.
-
Howdy Pards:
I have gotten an order for a shotgun belt for a 10 year old that keeps outgrowing belts. I remember seeing this design somewhere. Two buckles with an adjustable billet. This one allows an adjustment from 34" waist to 46" waist
-
Outrider,
That is pretty slick!!
Panhead Pete
-
Howdy Outridder 8)
This is real slick, I remember seeing this style in a lot of old westerns, years back and I always thought it to be a great idea , in fact as my gurth increased, I could of used this my ownself, I made a print out of your work for my folder in my shop , it' makes a nice reference, to refere to. NICE WORK PARD ::) :o ;D 8) Also a pard could do this to a too tight of a belt , by doing what you have done , but instead of using a straight billit , put a buckle on one end , this way you end up with the same look , if you can match the buckle , but then you could always change the buckle's, I think I remember Cowboy WC telling me about a customer he had to make this kind of special billit and buckle for , some of us pards have endured that increasing waist line over the years, :'( :-X :-[ :P ::) ??? :o :( >:( ;) :D ;D
tEN wOLVES ;) :D ;D
-
Howdy Outrider,
Thats pretty nifty! Excellent workmanship! Those shells are spaced perfectly.
I always enjoy seeing your work.
-
Nice job, Outrider. I don't know if I would have thought of that. It's a good solution to a growing boy. I'll remember that. Good work.
-
Outrider, nice work and a great solution to the growing boy problem. I may have to copy that my self. ;)
SR
-
Daniel, nice work on the sheath. I bought a knife a couple of years ago I was going to use as a boot knife, but then I made some chaps and wear them. Boot knife and chaps don't go together. :(
I'm thinking about making a new pair of chaps with the knife sheath built in to the chap leg and maybe even build the holsters into the chaps.
SR
-
Ten Wolfs, the billet with a buckle on one end to allow for a wider girt would make a retro-fit even easier. ;D
Great idea.
SR
-
Creative solution to an all-too-common problem. Nice job, pard.
-
Thanks Sliver Rings
I was going to do this a few years ago, in fact when I met Cowboy WC, I ask about this then , and that was when he told me about making one for a customer he had , at that time WC talked me into trying leather craft , so I never did make that extension, I have a few Alfonso Pinada rigs , that I grew out of , that could use the extension , maybe I'll still do it, I don't think I'll ever be that thin again. >:( :( :'( :o ::) ???
tEN wOLVES ;) :D ;D
-
Very nice! I have one all drawn up on the bench so my wife can switch from 20 to 12, but havent made it yet. Glad to see it will work! DM
-
Heres last weeks holsters. I have been office sitting for vacationing fellow employees, so instead of sitting and staring at the wall, I have been making stuff.
These are for my 1862 Police and my 1861 Navy .36s. The 61 holster is a crossdraw. They are both Pietta, so any Pietta Colt will fit, including the 1860. The carving is incised carving.
The next one is a pocket holster for my Hopkins and Allen .32. I am going to attempt to line it, and tried my hand at tooling. Was limited on flowers, so used the stamps. Should have tooled them a little after I suppose.
I am also thinking about 5 .32 loops on the lower portion, but havent gotten that far yet. DM
-
Howdy Dalton
Nice job on the holsters. Good looking set.
WC
-
Hello Dalton
I thought I was looking at an old antique pair of holsters , you did a great job of capturing the period , nice job pard, and the second holster looks good to , this is a good way to spend you time , beats the heck out of staring at the walls.
tEN wOLVES ;) :D ;D
-
Howdy Dalton,
Beautiful work! Ten Wolves hit the nail on the head. They look like period, antique holsters. Thanks for sharing this with us.
Look forward to seeing your completed pocket holster.
-
I like 'em, Dalton. Very nice job.
-
Very nice, Dalton. Those really do have a period look to them. Good work, pard.
-
Heres the little pocket model all finished up today.
-
:D ;D DM you're getting better and better every minute, nice job pard, is that a S&W 5 shot hammerless I see tuck in that new holster ?
tEN wOLVES ;) :D ;D
-
Nice work, Dalton. I should make a pocket holster one of these days. That one sure looks good.
-
Thank you for the compliments. That is actually a 1895 or thereabouts Hopkins and Allen hammerless .32 5 shot. Only has a little nick in the nickel, other than that is in great shape. Had the grips cast off of the originals, which are put away. Good little shooter, but only likes black. Smokeless factory loads make it want to come apart. DM
-
Neat little gun DM, and it looks like it's in real good shape, I have a S&W 5 shot 38 hammerless, that an old friend gave over 40 years ago, it's in very good condition , except for some of the nickle has come off , I've never shot it , but I've been told that it's perfectly safe to shot, so maybe I'll do that one of these days , it came with a little Mexican one loop holster, carved and laced, and it to is in like new condition , I'll have to post a picture of them together one of these days.
Take care Dalton , and thanks for sharing :D 8)
tEN wOLVES ;) :D ;D
-
Howdy Dalton,
Neat design and beautiful workmanship on your Pocket Holster!
I'll have to make one like that for my wife's S&W Model 65.
Appreciate your sharing this with us.
-
Hey all. Just completed my first holster. ;D I learned a lot and look forward to making more.
I didn't want to tackle tooling on the first one. Just wanted to get the basics down and see the project through to get an idea of the process. It's Will Ghormley's West Texas pattern with a squared off bottom dyed with Fiebling's medium brown.
I gave up on the awl after the second hole and went for the 1/16" drill bit. By the way, you don't want to see the back of the holster (the stitching line looks like it belongs on Frankenstein). Guess I have to master that. Any tips?
-
Howdy Santee, :D
You did good Pard , I bet you feel good , after making your first holster , I know I did , and your right you probably learned a hole lot by doing it , now that you got your feet wet , I bet you can't wait to get going on something else, so have fun pard , YOU'RE HOOKED NOW ;D
tEN wOLVES ;) :D ;D
-
Thanks, Ten Wolves. I'm now inspired to make another. Maybe the same pattern with some nice tooling.
-
Geez..looks like I have somecatching up to do here.
Dalton...excellant job on those holsters...like Ten Wolves I also have a S&W Safety hammerless
Santee...That is quite impressive for your first holster.. I have a feeling you will be a regular on this thread... ;D
-
All right, Santee. Nice going. That's great. I remember how my first one felt good to get finished. What it did was to get me going on more of 'em. Nice job. Good color for it. Looking forward to your next one with some design on it.
On the stitch line, cut a stitch groove first and then punch your holes in the groove. When you stitch it, the thread will lie down below the surface and line up with the groove.
-
All right, Santee. Nice going. That's great. I remember how my first one felt good to get finished. What it did was to get me going on more of 'em. Nice job. Good color for it. Looking forward to your next one with some design on it.
On the stitch line, cut a stitch groove first and then punch your holes in the groove. When you stitch it, the thread will lie down below the surface and line up with the groove.
Thanks, Outrider and Marshal! Good tip on the sewing.
-
My wife is going to the city today shopping, she ask me if i needed anything ::) I replied that I didn't realy needed anything but :) :) I would like to have the book Packing Iron ;D, to my suprise she said she would get it for me :o :o :o :)
So you guys know that i am a happy camper!
I have not ever see the inside of the book, and I know I will enjoy it. But I can say this, With this THREAD and I have went threw all 74 pages, I have saw the most AWESOME WORK EVER :)
I would like congrad EVERYONE THAT POSTED THERE STUFF, and also I would LIKE TO THANK ALL THE VETERAN LEATHER WORKERS WHO HAVE HELPED many people like me, MY HAT IS OFF TO ALL OF YOU :) :)
ACE
-
Ace:
Another good reference book is "Cowboys & The Trappings of the Old West" Lot's of good photos of all kinds of gear
-
Howdy Santee,
Congratulations on completing your first holster. Its a great feeling of accomplishment. You did a nice job!
Please keep us posted on your future projects.
-
Thanks, Johnny. Much like Ace, I must have gone through this string gandering at everyone's work 10 times. You all do such fine work.
-
Very good work there Santee. Looks good especially for a first time holster.
Heres a pic of the ones I did for my Starrs. Started them late friday after figuring out what went wrong with a pattern I had made previously. Took the carving out of Packing Iron and applied it to these.
I dont have any top finish on them other than some Lexol. I wanted to antique them, but dont want to fill in the carving, so.... will antique them naturally. You know, wear them out and shoot the holy black with them till they look good.
DM
-
And heres a few I did in the last few weeks of officesitting at work.
The Cheyenne is for a Schofield, and the other is for a S&W K frame, right out of the How to Make Holsters book.
Had a nasty cut in the leather but used it anyway on the Schofield. Its got a slight antique look to it.
The Model K was the first time using that basketweave stamp, and wasnt too impressed with it. My other basketweaves seem to line up better by dropping a corner in the hole left by the previous stamp. This one didnt. Oh well.
BTW, I dont have guns for either of these, so they arent fitted at all. That is usually my reason for more guns according to my wife. (She knows the truth tho).
DM
-
Hello Dalton
Nice work Pard, they both look good , I really like the Cheyenne holster , and the cut in the leather just gives it character, and I really like the double lines around the border and on the the inside this really sets it off giving it a classy look. I bet you wish you could have more of that office detail, ??? ;D Wow Dalton, I had to modify my reply, I totally missed your rig for your Srars, these are totally Awsome, and so is the look of the picture, kinda Chuck Burrows style , you really out did yourself on these, to get this look , do you dye your leather first and then do your knife work, to get it to show lighter where cut? this really looks like it came right out of Packing Iron. This is a job really well done. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Ten Wolves, yes I did my stitch groove, then dyed the leather. Then while it was still damp I carved it. Took a lot of stropping, that dye really hardens the leather a bunch.
Look at pg 85 in the PI book. That one is the pattern. It looks to me like it was done after the holster was made, and I tried to copy that as much as possible.
DM
-
(http://)(http://i34.photobucket.com/albums/d133/lennowenoxie/P3300004.jpg)
(http://)(http://i34.photobucket.com/albums/d133/lennowenoxie/P3300005.jpg)
Here are a couple of pictures of a belt I made here while back. Getting ready to start some holsters for my pistoles.
X Horse Pen
-
Hey that looks pretty good there Henry! Nice tooling work! Cant wait to see your holsters. DM
-
Howdy Gents
Dalton you did an excellent job, for being a copy, I only wish I'll be that talented when I grow up , Like I said earlier , they look like they just walked out of Packing Iron. GOOD JOB PARD :D ;D 8) ::) thanks for the info. on the knife carving ;D
Horse Pen Henry, Like Dalton would say this not your first Rodio, pard , this is some beautifull carving, I'm just starting to learn leather carving , and I can really appreciate your skill , I 've learned so much by seeing all you pards work, I look forward everyday to whats going on in the Leather Shop, Thanks for sharing ;D
tEN wOLVES ;) :D ;D
-
I appreciate the kind words fellas. Thanks!
Say, maybe you fellas that are more computer savvy than I am can explain why my pictures are so big and the rest of the pictures on here I have to click on 'em to make 'em bigger. I have a Photobucket account where I store pix. I clicked on the IMG code and pasted it here and they show up BIG. I am afraid to shrink them because once I shrink them they will stay that way. So...how do ya do it?
X Horse Pen
-
Hey Horsepen, dont use a link to post them. Use the additional options at the bottom of your text box on the left side, when you are typing a message. There is a browse button in there, that allows you to attach them directly to CAS City. That way if your link is broken (which often happens), your picture will still be here. You will have to resize them usually, as it will only take a 100kb pic at a time. Good luck. DM
-
Those holsters look great, Dalton. I like the pattern on the slimjims. The other two look just as good. The basket weave looks straight on the K-frame, too. I like the idea of making holsters then needing to buy guns to fit. I've been missing out there. ;D
Good tooling on the belt, X-P. I can hardly wait to see the rig you come up with. Here's a thread that explains about photo inserting: http://www.cascity.com/forumhall/index.php/topic,15416.0.html (http://www.cascity.com/forumhall/index.php/topic,15416.0.html)
-
Dalton, Marshall Will, thanks for the tutorin'. I get the hang of it with some more practice. It seems every board does things a little different. I sure don't wanna waste any space with giant pictures.
Dalton, I like those slim jims, too. On the Cheyenne holster, did you bevel the border lines after you cut them in? How exactly did ya do that? Looks real nice. Kinda reminds me of the rolled beaded edge on old trade silver armbands and gorgets.
X Horse Pen Henry
Signed right ther' by the X
-
Horsepen, I did bevel them after cutting. I just used the beveler and went around the edges by hand, but not with a hammer. Works alright, but doesnt impress as well, and its easy to slip and make a mark where you dont want it.
DM
-
Hey
Dalton Thanks for your reply to horse pen on attaching photos. I didn't know that. It's sure save me some time in the future.
-
Dalton,
Wow man, i like that rig you made for your Starrs, Now I realy can't want to get my book, this kills me, 5 days to get my book, I live 35 miles from a huge Amozon warehouse, have a friend of mine that works there said they had that book in the warehouse.
Henry, those belts are AWESOME , never will there be a day I will ever be able to do that kind of work!!! Keeps us up to date when you get the holters done, I want to see them!
Dalton, If they ever can get me out of some of this pain, and those ##### ever get around to getting me some cash, I might just have to drive up to Hill City (I think that is where you said you shot in Kansas) and shoot the brezze!
You all keep posting those good looking leather goods!
ACE
-
G'mornin' Ace! Thanks for the good word but I gotta tell ya. You keep doing it and ya can't help but get better at it. Shucks, it's like ridin' or readin', the more you do it the more ya learn about what to do next. I haven't practiced much over the years because of so many other irons in the fire. I am pickin' it up again though. It sure feels good to be workin' leather again!!!
Oh! One more thing. This Leather Shop Forum is great. I just started hanging around here lately and I am pleasantly surprised to see so much great talent and friendly advice shared here. Good place and even better folks!!! Y'all have a great day out there.
-
With Dalton's description of how to post pictures without using an image hosting site, I just had to try it.
I know we don't normally post pictures of billfolds, but it's the most recent thing I've made. I used the pattern from my 1880's Collins/Morrison Saddle. The stamp I used is a little different, and I used a different border stamping but the saddle is where I got my inspiration.
(http://img337.imageshack.us/img337/9264/1022361sb5.th.jpg) (http://img337.imageshack.us/my.php?image=1022361sb5.jpg)
OOPS my pictures are too big. I guess I'll have to keep using Image shack
-
That's a nice surface of weaving. Which stamp is that? I want one.
X Horse Pen
-
That's a nice surface of weaving. Which stamp is that? I want one.
X Horse Pen
It's the medium sized stamp from the Craftool Dots Geometric 3-pc Stamp Set 69008-00
-
That sure looks good Pitspitr sir!!! Would be proud to carry that around. Need to make one myself. DM
-
That looks great. You can keep posting those big pics in Image Shack. It makes it easy to check out the detail. good work. I'd love to see a picture of that saddle, too.
Now, if you want to reduce the size of the photos, pm me and I can send you an image resizer that works in Windows XP. If you have a Mac, you may not be able to install it.
-
Pitetir, NICE WALLET !!! Get deal, I love lines!!
Thanks for sharing!
ACE
-
That looks great. You can keep posting those big pics in Image Shack. It makes it easy to check out the detail. good work. I'd love to see a picture of that saddle, too.
Now, if you want to reduce the size of the photos, pm me and I can send you an image resizer that works in Windows XP. If you have a Mac, you may not be able to install it.
I use Vista. here's a picture of the saddle again. As I said the stamps I have are a little different than what Collins/ Morrison had.
(http://img381.imageshack.us/img381/7038/1022338ku7.th.jpg) (http://img381.imageshack.us/my.php?image=1022338ku7.jpg)
-
It's the medium sized stamp from the Craftool Dots Geometric 3-pc Stamp Set 69008-00
Thanks for the info, Pitspitr. It appears I have missed out on a whole style of leatherwork. I have never considered buying stamps except for some of the basket weave stamps. I'll have ta give it a looksee.
Many thanks for the catalog number,
X Horse Pen
-
Just completed the two 7-1/2” Holsters for this rig. I can use my pair of 7-1/2” 1873 SAA’s or my 7-1/2” and 4” RM Conversions. I’m going to do some practicing with this rig and then use it in an upcoming match to see how the shotgun shells on the belt work out for me.
-
I have never considered buying stamps except for some of the basket weave stamps.
I really hadn't either until a couple of years ago. Now I mostly do the basket weave or geometric stamps. They're PC and I usually am happier with the way they turn out than my floral carving. I like floral carving I just have never been able to make it look as good as I think it should.
-
I use Vista. here's a picture of the saddle again. As I said the stamps I have are a little different than what Collins/ Morrison had.
(http://img381.imageshack.us/img381/7038/1022338ku7.th.jpg) (http://img381.imageshack.us/my.php?image=1022338ku7.jpg)
Thanks, that's great. Nice look to it.
Good job on those holsters, Johnny. You'll probably like the shotshells where you have them. I did that on my pistol belt and it is really great.
-
Howdy Marshall Will,
Thanks for the kind words and posting the picture of your rig.
That is top quality workmanship and a beautiful design!
-
Thanks, Johnny. The belt design is similar to one on page 172 of Packing Iron, slightly narrowed and with the loops at the billet end so the end of the belt doesn't cause a safety issue by interfering with my left pistol at a match.
-
Howdy Gents
Will I guess I've been asleep at the helm. First off nice work on the wallet Pitspitr, and I like the stamp you used, it kind of looks like the cross stamp without the flower. :D 8)
Johnny McGrae, your rig came out real well , and the web loops look nice in contras, useing that nickle cart buckle also gives it a nice look and a different look I have several of these buckles and I really like them , I remember Nick Barkley always wore one on his rig and his pant belt in The Big Valley, this setup should work out real well for you Pard, well done. ::) 8) ;D
Marshal Will , you did it again , this is a sharp looking rig , and I really like your border tooling, it sets it off real nice, and the color has depth to it, and by not having it all shiny it looks more period , I'm just finishing a pair of Dodge City holsters myself, there a nice design, if things go well , I'll post pictures sometime this week. Does this belt have any cartridge loops or is this just for SG shells, I know some pards like to carry their cartridge ammo in their vest pockets. Well done Will . ;) :D ;D
tEN wOLVES ;) :D ;D
-
That's a great stamp on the saddle, it's a shame the stamper didn't take a little more time in making his
stamps line up.
WC
-
Howdy Johnny
Good looking rigs
WC
-
I use Vista. here's a picture of the saddle again. As I said the stamps I have are a little different than what Collins/ Morrison had.
(http://img381.imageshack.us/img381/7038/1022338ku7.th.jpg) (http://img381.imageshack.us/my.php?image=1022338ku7.jpg)
Pitspitr, what are the dimensions of the Morrison stamp from point to point? Also, is the brown background lower than the white lines that make up the design? I'd like ta tryin' make that stamp if you don't mind?
Thanks,
X Horse Pen
-
I really like your border tooling, it sets it off real nice, and the color has depth to it, and by not having it all shiny it looks more period , I'm just finishing a pair of Dodge City holsters myself, there a nice design, if things go well , I'll post pictures sometime this week. Does this belt have any cartridge loops or is this just for SG shells, I know some pards like to carry their cartridge ammo in their vest pockets. Well done Will . ;) :D ;D
Thanks for the compliments. I made a left holster, too, but it didn't add to the photo so it isn't in it. The border pattern is basically a copy of the one on a holster at the bottom of page 102 in Packing Iron. The dye is Chuck Burrows' vinegaroon dye recipe, completely correct for the 1800's. It produces a very beautiful black that modern dyes can't come close to. I didn't put any cartridge loops on it. Instead, I use a belt pouch for extra rounds.
-
Howdy Marshal Will Wingam
Will I think you captured the look real well, and useing Chuck Burrows recipe, how long did you leave the leather submerged in the dye ? , or did you ?, anyway it came out looking great , I'm going to have to make me up a batch of this dye , you just cant beat the look. ;D Your border tooling is right on to , and really stands out even though it's in black, this is where that Vinegaroonn, makes the difference. Thanks for sharing Will. :D
tEN wOLVES ;) :D ;D
-
Heres my latest pair of 5.5" Vaquero holsters made from Wills Cheyenne pattern.
-
Marshal Will,
That vinegaroon die sure puts a fine color on the leather. Deep & soft, rather than the harsh look of the modern dies.
Dalton M.,
I like the border stamping that you used. Looks great!
-
Dang Dalton :D
Pard I think you have this holster thing down pat Pard, these holsters are beautiful, I like the way you put multi lines on your work , it looks real period , but classy too, and thats one of my favorites on the tooling , is that 10/12 ounce Veg Tan you used for this, it looks nice and thick, and did you use a dye or stain, the color is very nice, Dalton you're rolling these new holsters out about every other day it seems like, Well done Pard ::) :o 8) :D
Take Care Pard
tEN wOLVES ;) :D ;D
-
Howdy Gents :D
Will I just finished my Will Ghormely Dodge City Holsters, so here they are
tEN wOLVES ;) :D ;D
-
10 W.,
WOW, those are beauts!! Great work!! Lots and Lots of great work showing up these days. ;D
-
10 Wolves, those look really great! I just got that pattern here a few weeks ago, but havent tried any yet.
Those holsters are actually 9-10, and I used Fiebings Saddle Tan Oil, with a wash of Saddle Tan antique stain, followed by Satin Shene.
As far as roling them out quickly, I found if I start Friday night and work on it thru the weekend, with the main brunt being late friday, I can have them pretty much done or at least stitched by the end of the weekend. May have to do edges and topcoats yet tho. I do both at the same time, so I can make them match each other easier. DM
-
Nice looking holsters, pards. Will does make good patterns, for sure. I really like your stamping on Will's Cheyenne holster, that's a great pattern. I had to make a couple before I got my pattern to look right. Could have saved all the hassle by just buying his to start. I'll do that next time. 10W, I may have to modify my Dodge City pattern to make the top line more like his. I really like that look.
10W, I wiped the vinegaroon on liberally until it made a nice rich black. After it dried, I soaked it in baking soda and water until it stopped bubbling, maybe a minute or two. Then I neutralized it with a light coat of olive oil after that dried.
-
Nice holsters pal.
WC
-
Terrific work! Do most of you gents dye the flesh side of the holsters, too?
-
Howdy Dalton & Ten Wolves,
Beautiful job Pards! You can both be very proud of your work.
Describing your techniques for finishing the leather is great. Many thanks for sharing this with us.
-
I second that motion! Dern nice looking rigs and many thanks for sharing your recipes with us.
X Horse Pen
-
TW, :o Absolutely AWESOME :o No I am not shocked I just like that Icon, I have seen a lot of your work, and it is no less than TOP RATE, i love those!!! The detail that you put into those holsters are smoken!! When one of you guys post your work, it realy gets me going!!! The only problem I am facing, is that I get a idea in my head what i want to start on next, and then someone like you post those, and then I get to thinking, maybe i want to make them! :-\ :-\ ??? :-\ I just got to get something laid out and get to work on it! My son is back from the west coast, My mother in law passed away Wensday night, so got that to deal with, and then I can get my self in gear!
TW, AWESOME JOB PARD :)
ACE
-
Terrific work! Do most of you gents dye the flesh side of the holsters, too?
I don't always dye the flesh side when I use modern dyes because many of them rub off on your clothes. The vinegaroon doesn't rub off since it changes the color of the leather rather than adding pigment to it.
-
Howdy Gents :D
Thanks to all of you for your kind comments, I think everytime I make something I learn something new which makes this craft so interesting and fun. :D
A BigThanks for sharing your talents and information to Dalton Masterson, & Marshal Will Wingam, I always look forward to hearing new ideas and thoughts. ??? :o 8)
Thanks again everyone for stopping by and taking a look ;)
tEN wOLVES ;) :D ;D
-
Depending on the holster I am making, I dye the flesh side. Usually a lighter color of the main body, like light brown with a med. or dark brown holster. Gives it a little contrast that way. Mainly on loop holsters I do that, on slims, not always, but I like to for a more finished look. I usually slather gum trag on the back of loop holsters to smooth them out, so they get sealed pretty good once I topcoat. DM
-
Howdy Gents ;D
I just finished the grips for my Remington 1875 , and I took a few pictures, I think the color, hue, and tone came out better here than on the other picture , so if you pards don't mined I'll post them. ???
Thanks for taking a look :D
tEN wOLVES ;) :D ;D
-
10 Wolves, they look great with those holsters! Color is outstanding. Did you use the leather dye as a stain? I did that on a knife handle, and it turned out well. DM
-
Howdy Dalton
I just got this Remington 1875, and the wood grain on these grips was beautiful but it was just to glassy and or too glossy looking for me and they felt slick and plastic to me, I liked the color so I didn't remove the old finish, I haven't used the spirit dyes on wood yet , but I know a lot of pards do with nice results , I plan on trying this one of these days. About 20 years ago I picked up some wonder type oil called Arrow at a gun show, and I forgot I had it , but I pulled it out , and read it , and I remember the demonstration, with this Arrow Oil you don't have to remove the old finish, you just work right over it and it blends right in , but it brings out the grain that is usuaaly hiding under any finish, you use a super fine wet-dry paper, I used a 500 wet -dry to get the finish here, of course you can use this oil on raw wood also. After I finished with the oil and sanding, I put the grips out in the sun for a couple of hours to dry, then I wiped them down with some Rubing Oil, the finish is now of a natural polished wood , but the best part is they grip a good 60% better than they did with that glossy finish on them, their almost like gripping real Ivory. I have a web site for the Arrow Oil some place , I'll try to find it and post it here. Thanks for your comments on my holster , I think the lighting was a whole better on this picture.
Take care Pard ;D
tEN wOLVES ;) :D ;D
-
That really came out great. good photo, too. I like the gun, the holster, the branding iron and the spurs. Heck, I like the yucca, too. :D Good work, pard, I'm going to have to look for some of that Arrow oil. I have a few Uberti grips that need something done.
-
Howdy Ten Wolves,
The grips and the holsters really compliment each other. Beautiful job! Many thanks for posting this.
I would be interested the website for Arrow Oil as I have the same problem with the grips my Richards Mason Conversions.
-
Howdy Gents :D
Thanks for the nice comments Marshal Will & Johnny McGrae, I'm real happy with the way things came out from the holsters to the grips, the grips have the best feel that I have ever had on a pair wood grips, like I said earlier their like Ivory, and you can't beat that with a stick. And to think I had this stuff in my gun supplies cabinet since 1984 and never used it, BOY DID I SCREW UP, I could have useing this stuff for over 20 years now, anyway at least I have rediscocered it. I found the web sites for Arrow Oil Stock Finish, and another site for quility wood stains so here they are.
Thanks again Pards , and have a great weekend. ;) :D
tEN wOLVES ;) :D ;D
For the Arrow Oil Stock Finish go to www.rb-treasures.com
For stain go to www.cheyennesales.com
-
Thanks, 10W. I have it duly book marked. I'll round some up. :D
-
;) :D ;D Will I know you will love this stuff , one thing though, after you finish your final application, and let it dry, use some rubbing oil to wipe everything down, and then you're done, it thats simple, I can't tell you where to get the rubbing oil , the pint can that I have has lasted me over thirty years, and it's still half full, it goes a long ways and you don't have to use very much, just put it on a small peice of old t-shirt and do your wiping this way. I bought it at Standard Brands when they were in business. I think Brownells or Midway USA have it.
Have fun :D
tEN wOLVES ;) :D ;D
-
I wonder if the rubbing oil is linseed oil? I may just try that, anyway. Thanks.
-
Howdy Will, :D
Rubbing oil is a different blend of oil , it is thinner, I've always used it as the last step in rubbing out a gun stock or wood grip , I would use it together with rotten stone as an abrasive, and then finally by itself, Linseen oil is thicker and stickier, but I don't see any reason why it wouldn't work, your just using it as last step wipe down and not a finish.
I use this process as a final step in finishing up the wood , after useing Lacquer, True-Oil , Lin-Speed, or any oil type wood finish. I would think any good paint store would carry this oil, good luck Pard, you're going to love the results, just remember just use the oil only as a wipe off agent after your final coat of Arrow Oil has dried, if you rub too much you can put a gloss right back on it again.
tEN wOLVES ;) :D ;D
-
Marshall,
add some mineral turpentine to your linseed oil. This will thin it and has been used for some time to finish timber. Just make sure that you clean any excess off and give it a good buff.
Regards
-
Thanks to the comments and info on this forum, my second holster came out much better than the first. The stitching in the back looks worlds better, and I suffered through the awl so I could have more control. Marshall was right, the stitch groove does make it look like the stitching grew out of the holster.
I slimmed the width of the skirt about 1/2", dropped the curve at the top for more pistol exposure, and used a Dark Brown dye (with less red in it). Tried my hand at a border, and am pleased with the results.
Now I'm working on a version of the Ben Wade holster. Okay...so I'm hooked. I blame you all. ;D
-
Howdy Pards:
Need your opinion on this project. This is a "gun caddy" (holds two guns) that you attach to your gun cart or can carry it over your shoulder. It is generally used when there is a break in the shooting and you take your guns off or transporting from the car to the shooting area. It has two pouchs that oppose each other with a cover flap...similar to saddle bags or a flap holster. This is the third one I have made and so far I have had no complaints from my clients...This is not my design..and is kind of a pain to make.
-
In addition the revolver is my new Great Western II. I picked up a pair of SS versions yesterday.
Ten Wolves...thanks for the input into these revolvers...I hope to get to the range this afternoon to try them out.
-
Howdy Gents ;D :D ;)
You Pards are turning out some nice leather, Santee, Your right you're hooked , and we're happy to have you ride the trail with us , your second holster came out real nice, it even looks a little antiqued, I just started two years ago my ownself, and I've been hooked ever since, Santee this leather crafting just gets better and more fun the more you do it . Congrads Pard you did good, and now I can't wait to see you're next project. ::) :o 8)
tEN wOLVES ;) :D ;D
Hello Outrider :D
This is a neat idea pard , so you can strap this to your gun cart or over the shoulder, sorta like a REAL MANS PURCE, this would also be an easy way to pack your guns to an indoor range , although out here in California they like the guns locked up . but for CAS it would be just the ticket, sometimes there isn't a whole lot of room in the gun cart box , and this would free would free the space up for other goodies. GOOD IDEA. and I'll bet there will be a market for them too. ??? ::) 8) :D ;D
That's a dandy looking SS Great Western l l pard , and I know you're going to love it , if their anything like mine
Have fun at the range :D ;D
tEN wOLVES ;) :D ;D
-
Thanks for the tip, Judge. I'll try it.
Now I'm working on a version of the Ben Wade holster. Okay...so I'm hooked. I blame you all. ;D
Uh-huh. Good work, pard. I'd be honored to take part of the blame for feeding your habit. ;D Looking forward to more stuff.
Outrider, that's a nice design. It looks fully functional. For California, you could simply put a loop through the strap for a padlock. Bingo, lockable case. I'll remember that idea. ;)
-
Santee,
If ya ever get tired of that holster throw it on my bunk. I'll take it off yer hands. Nice work!!!
X Horse Pen
-
Howdy Santee,
Great job on your second holster! You can be real proud to wear it. This is a fascinating hobby to get hooked on.
Howdy Outrider,
I think thats a nice, practical design. As always your workmanship is excellent. I thought of permanently attaching some standard open holsters to my gun cart but I like your design with the buckled flaps. It makes sense to have something portable to move guns around with.
By the way, what Software do you use for for getting your pictures ready to post? Your pictures always look good.
I'm using a Kodak 5 megapixel camera with Kodak's Software and I always seem to lose some clarity in getting my pictures under 100 KB.
-
Santee, that looks really good! You are coming along nicely!
Outrider, I have seen that exact design in person, and thought it would have been a nice addition to my gear. Very practical to have I think. I even took pics so I could attempt to make one myself, but havent gotten around to it. Looks good. DM
-
Thanks for the kudos, fellas.
Outrider, I like that color of brown you achieved. Mind sharing what dye you used?
-
Santee:
I used the Fiebings Mahogany dye
-
Dalton:
Have you made up a pattern yet for the pistol caddy? Be more than happy to send you a copy...these caddy's are not as easy to assemble as one might thnik, but they eventually come together
-
Outrider, sendin ya a PM. DM ;D
-
Pitspitr, what are the dimensions of the Morrison stamp from point to point? Also, is the brown background lower than the white lines that make up the design? I'd like ta tryin' make that stamp if you don't mind?
Hi Horsepen
Sorry for the tardy reply. I was out of town for a few days.
The stamp is .75" across the points. It almost looks like they used a veiner to do the work but I don't really think it is.
Make all the stamps you want. The original isn't my design so I don't own it. I'd like to see how it turns out for you.
-
Howdy Pitspitr,
Good ta see ya back. I will post pictures when I get it done. If it is successful, that is. I appreciate the measurement.
Cheers,
X Horse Pen
-
Here is my new adjustable bandoleer and holster rig. I used snaps so I could use what ever holster I wanted with it.
Triggersmith
-
Hey thats pretty cool there Triggersmith! DM
-
Nicely done Triggersmith, it looks good 8)
tEN wOLVES ;) :D ;D
-
I like it, TS. Good idea to make it universal for different holsters. Nice. Thanks for the pic.
-
Okay. Here is my version of the Ben Wade Holster. Yeah, I used the same dark brown as previously seen and didn't do all the floral tooling. BUT, my stitches are completely straight in the back and I successfully pulled off that rapid rivet thing.
I really dig the riveted loop look, now. Next time I may try an antique tan...
Oh yeah, my wife blames you all, too. ;)
-
Santee, that looks great!! Good job! DM
-
Lookin' good, Santee. Nice work. Now all you need is a pistol with those fancy grips. ;D Oh, yeah, and a layer of dust. ;D
-
Howdy Triggersmith & Santee,
Very nice work Pards! You can be proud to wear these holsters.
Thanks for sharing this with us.
-
hOWDY Santee ;D 8)
Excellant work pard , you are coming right along, much faster than I did when I first started out , this is a real nice copy of the Ben Wade holster , even though you chose to use border tooling instead of the flower carving , it looks good , your border stamping is nice and even, and I like the color too, WELL DONE ;D 8) And oh yea I like the way you layed everything out, it makes for a nice picture, I use my pictures as wall paper on my pc , and change them around as I make new rigs , I find this to be a good way of getting ideas of how or what I'm going to do the next time, and I just like looking at my stuff when it's done. ::) :o ??? ;D
tEN wOLVES ;) :D ;D
-
Lookin' good, pards.
-
Thanks, pards. Yeah, I want to get it more lived in looking. Better just use it!
Next one I'm gonna try the walnut dye that everyone is raving about. Maybe try my hand at some carving... :-\
As for the photos, I try to lay them out like Chuck Burrows and Ten Wolves, but I don't have that eye.
-
Santee,
man you are not letting any grass grow under your feet, I realy liked the second holster, and this last one is kickin!!! :o
Keep it up pard!! I was thinking that you and I started off about the same time, here i am still in Kindergarden and you are allready in High School :o Keep up the good work, Pard!!!!!
Tiggersmith, AWESOME looking rig! i guess I am going to have to get out of this bed and get something done no matter how much it kills me.
Maybe today I can get something done, I hope!
Later
ACE
-
Thanks, Ace. We did start off about the same time! Yeah, I get that perfectionist thing going on and I have to make it better right away.
But I have yet to tackle a cartridge belt. Gotta wait for the next paycheck and get some patterns...
-
Hey Bud,
You won't have any touble with that!! I got enough relielf to cut a holster out today, that's about all I got done. I was using some scrap and it was oiled tanned , found out right quick that it doesn't take a stamping or crarving! I had some home made stamps, that I used the clamp method, hope my glue holds to the lining ??? Just doing it to practice, and let me tell you i need it :( :( I am going to cut out a pair off cuff's tomorrow and do some didling if i can get out of bed! I got 2 hours today, this stupid weather just kills me!
I know what you mean about the next pay check to buy leather, I still am not having any luck selling my stuff, If i could get some of it sold i would buy me some leather!!!! I bought some here a while back, but I don't want to use it, untill I am good enough to do a job to be proud of!!
Can't wait to see your next stuff!
ACE
-
KC, that is some great work. You can't get that kinda teachin n school.
http://www.theleathercraftsman.com
This web site does not profit in any way. It is personally funded.
-
Attached are pictures of a Butt Cover made to serve as a recoil pad. This is for a neighbor who is building a long range rifle. I purposely did not match the contour of the butt plate so more padding could be added. He wanted me to add an insert for a "Buffalo Quarter" and just finish it with Neets Foot Oil.
I'm also making a Butt Cover for his Sharps and attached is a picture of the "wet-molded" part. This cover will match the contour of the butt plate. I use Saran Wrap to help keep the shape while drying.
[links no longer active - deleted by moderator]
PS: I've started to use "Photo Bucket" so I can post better looking pictures.
-
Nice. I like the concho. :)
-
Howdy Johnny
You're getting to be quit a butt cover mechanic, nice job and I like the color too, it looks like an oil tanned leather :D ;D
tEN wOLVES ;) :D ;D
-
That looks really great, Johnny. I prefer the shotgun-style butt plates and that gives the same feel plus a little padding. The molded end really gives it a finished appearance. Great job. I really like it.
-
Howdy Boys,
Many thanks for the kind words.
I was on the range today and fired my .45-70 Sharps with a similar style Butt Cover. It really did the job for me as I felt virtually no recoil.
-
Howdy Johnny
I learned a long time and many years ago from gun stock maker, that if you cut or change the angle of the gun butt to
90 degrees center line of bore, you virtually remove all the felt recoil that can be removed. I tried his method on a gun I belt or I should say customized, it was a 1903 A3 SPRINGFIELD 30/06, And it worked, your pads, and useing a shotgun type but do the same thing.
tEN wOLVES ;) :D ;D
-
Howdy Tenwolves,
Thank you for your post. Thats very interesting. Here are a few pictures I just took of my Sharps. I've tried to eyeball that 90 degree measurement. I suppose using a large rafter square would give me a more accurate 90 degree measurement. It would be interesting to make a cover with an exact 90 degree dimension. I just love this stuff because there is so much to learn.
[links no longer active - deleted by moderator]
-
OK pards, it is time to show off your talents. I would like to see pictures of holsters, belts, sheaths, etc.... that you have made yourself. Let's see what ya got!!!!
Howdy All
I know this is not period but it is cowboy and leather.
Here is the saddle I just finished for a contest next month. This is my first full sized saddle. I've done one
Pony Saddle a couple years ago.
Wish me luck.
WC
-
Great looking saddle! Looks like it would be comfortable to ride! Good luck in the contest!! ;D
-
Howdy Tenwolves,
Thank you for your post. Thats very interesting. Here are a few pictures I just took of my Sharps. I've tried to eyeball that 90 degree measurement. I suppose using a large rafter square would give me a more accurate 90 degree measurement. It would be interesting to make a cover with an exact 90 degree dimension. I just love this stuff because there is so much to learn.
http://i278.photobucket.com/albums/kk81/jvsaffran/Sharps/100_0281.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Sharps/100_0280.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Sharps/100_0282.jpg
Howdy Johnny
When this friend of mines Dad which was a professional gun stock maker told me this , I didn't understand what he ment , but after he explaned it , it made perfect sence,by having the butt at 90 degrees you are filling the whole stock with the recoil instead of just the top or bottom of the stock, when I built my 00/06 I did this and I couldn't believe the difference in felt recoil.
tEN Wolves ;) :D ;D
Howdy CowboyWC
Will for you pards that can't get to see WC's saddle in person, it's even nicer in person , and I hope WC wins in the up coming Leather Show in Sheridan Wyoming.
GOOD LUCK PARD
tEN wOLVES ;) :D ;D
-
Howdy Pards
I just finished my copy of the Jesse James rig from Will Ghormley's Pattern, I really like this rig, these same holsters will hold my Remington 1875, my Colt SAA, and my Ruger New Model Vaquero's, I can use them in a cross draw or strong side, and twist and draw is smooth and easy, I can see why Jesse James loved to wear this style rig. I finished the leather CowboyWC's way three light coats of oil, and the Skidmores Leather Cream, after each coat I let them sit in the sun to sun tan, and also after the Skidmores Leather Cream. So here they are :D
tEN wOLVES ;) :D ;D
-
Howdy Ten Wolves,
That 90 degree theory makes perfect sense to me also. I appreciate your input on this. When I get some time, I'm going to make myself a new Butt Cover for my Coach Gun using a 90 degree dimension.
Just looked at your Jesse James Rig. Absolutely gorgeous! Great workmanship. I like the color. Thanks for sharing your method with us. I'll have to try that.
Howdy Cowboy WC,
Thats a beautiful Saddle! Best of luck to you in your upcoming contest.
Thank you for all of your helpful and informative posts.
-
Man is there some serious talent here! WC, I don't know squat about the saddle craft, but that is a beauty to behold!
Ten Wolves, those holsters are top notch. Love the carving/embossing!
Johnny McCrae, do you have to remove that nice looking butt cover after each shoot? I mean, will it harm the metal on the butt plate if left on?
-
Hi Santee,
I leave the Butt covers on all of the time. So far I do not see any problems with the metal or wood. I seem to remember reading somewhere that Vegetable Tanned leather will not react to bluing but Chrome Tanned leather will. Perhaps some of the other Pards can give some input here.
-
Great saddle, CWC. I like the diamond accents on it, they give it a nice balance. I hope you do well in the contest.
Super job on those holsters, 10W. I really like the finish. It sets off the design nicely. Impressive.
Regarding leaving the butt covers on, I put mine on and forget about it. I never have looked to see if there was any adverse reaction from the leather. I figure at worst, I re-blue them again. Of course, I'm not covering up expensive stuff, only my match guns, which take a little wear now and then anyway.
-
tc, First saddle? Good work! Good luck at the show. Are ya gonna keep buildin' 'em?
Ten wolves, nice looking set of holsters. The carving is good and I like the color of the suntanned leather on 'em.
Speakin' of saddles......anybody have a resource for old west saddle patterns and construction. The half seat saddles with the seperate jockeys from the seat and all? I have found some real nice pictures on the web of the 1870's style saddles but no details on how to make 'em. Riggin' patterns and such? I found a tree that will work on the Bowden saddle tree site. ;D
-
Howdy Pards
I just finished my copy of the Jesse James rig from Will Ghormley's Pattern, I really like this rig, these same holsters will hold my Remington 1875, my Colt SAA, and my Ruger New Model Vaquero's, I can use them in a cross draw or strong side, and twist and draw is smooth and easy, I can see why Jesse James loved to wear this style rig. I finished the leather CowboyWC's way three light coats of oil, and the Skidmores Leather Cream, after each coat I let them sit in the sun to sun tan, and also after the Skidmores Leather Cream. So here they are :D
tEN wOLVES ;) :D ;D
Howdy Pal
You did a great job on the holsters. I think this is your best set so far.
You make me proud.....
WC
-
Speakin' of saddles......anybody have a resource for old west saddle patterns and construction. The half seat saddles with the seperate jockeys from the seat and all? I have found some real nice pictures on the web of the 1870's style saddles but no details on how to make 'em. Riggin' patterns and such? I found a tree that will work on the Bowden saddle tree site. ;D
[/quote]
I believe Will Ghormley has them.
http://www.willghormley-maker.com/
WC
-
;D ;D ;D Thanks everybody for the kind comments , it's much appreciated, making this Jesse James rig has been a been an enjoyable project. ;D ;D
tEN wOLVES ;) :D ;D
-
Thanks wc, that's the saddles I'm talking about. I appreciate the tip.
X Horse Pen
-
Very nice, indeed, 10W. Those look great. You should be proud of 'em.
-
Howdy Irish Dave
Thanks for the kind words Pard, and you're right, I feel real good about the way they came out, I'm really starting to enjoy the leather carving and tooling, I thought this Jesse James leaf pattern was kind of unique, from what we normally see.
Thanks for taking a look :D
tEN wOLVES ;) :D ;D
-
10 Wolves, that is one heck of a nice set! Beautiful! Cant say much more than that. DM
-
:D Thanks Dalton, I think I'm going to like this Jesse James rig, ;D
tEN wOLVES ;) :D ;D
-
Been wantin' to make an Olive Patent style holster for awhile and finally just decided to do it. Procrastination is he!!.
It's for my 5" Laramie.
[link no longer active - deleted by moderator]
-
Howdy Irish Dave
Nice work Dave, thats some good looking tooling, very unique stamping , and your Laramie fits perfect in it, you did a real nice job of designing this holster,and you always give your work a special look with your choice of border tooling , WELL DONE PARD. ;D 8) I really like it, and the way you laid out your picture, looks like it's right out of Packing Iron. :D ::)
tEN wOLVES ;) :D ;D
-
:o TW, you are smokin :) :) The JJ Rig is incredable :) One thing about it, the first time you wear that rig to a shoot, you will when for sure, because everyone one there will be so distracted by the workman ship of that rig, there consintration factor will be crap. What did you use for dye? Color is awesome, and the detail KILLER !
Thanks for sharing, i am pumped up again!!!
ACE
:o Dave, AWESOME, love the flow of the design verses the border, I would love to have a close up of the border, it okay if you don't want to! One thing I don't like about skirt Holsters is the skirt pucker, but on your's you did such a perfect design layout and you cut it to a tee!
Great Job Pard
ACE
p.s. I want to see that close up of the border ;D ;D
-
Irish Dave, that is very very very to the infinite power nice. Ditto on some closeup shots. Is that a S&W in there or a repro? DM
-
Howdy Ace :D
Thanks Ace for the flowers on my Jesse James rig, it was fun to make. I didn't use any dye , I did this the CowboyWc way, I did three light oilings with sun tanning in between, and then a final rub down with Skidmores Leather Cream, and then a final sun Tanning, and thats it, and I'm liking this finish more and more, and it's totally natural. ??? ::) :o 8) thanks for your comments pard. :D
tEN wOLVES ;) :D ;D
-
TW,
the color makes the JJ design stand out like a 50 Gold peice lying on the black sand of the Kona Beach. Three more rigs, and i am going to set down and trace out a nice pattern, and do my best, I might be bugging the heck out of you and others When I start,I don't think I will have to because I have read 3 books and understand the princable of it. I am just not ready,all the stuff I have made has been made out of scraps, I just want to practice and practice, without spending money I don't have, when I know and have the confidence that I can do a job to be proud of, that is when I will use good quality leather, but I will be!
You are Rockin My Friend
ACE
-
Niced work Dave. You captured the look perfectly. That could also hold a Colt DA or a Merwin-Hulbert and look good. Be sure to put a close--up of that border on our border thread. Nice work. Thanks for sharing.
-
Irish Dave
That is a good lookin rig.....
WC
-
Just gorgeous. ;)
-
Many thanks for the kind words, pards. Much obliged. There's a lot of good work on this board and I'm pleased to be part of the exchange.
Ace & Dalton: I'll try to send you a closeup (e-mail or PM whichever I can get to work.) ;D Actually the stamping is very similar to what I used on the shoulder rig with only a couple of changes.
Dalton: That's a Beretta Laramie fitted with repro S&W grips. They fit my hand much better than the "tree stump" factory grips and the checkering gives a good hold -- plus I think they're much better looking. It really takes very little fitting to make them work on the Laramie -- it's a pretty close copy of the New Model No. 3, especially in the grip area.
Will: Yeah, it's kind of the generic pouch shape of the later Old West period (by intent) and could no doubt fit a variety of revolvers with little or no modification. I do know it also fits my original S&W .44 DAs.
***********
By the way, the belt is sporting one of my $4,000 buckles.
Well, maybe I should explain......
A fella I once knew gave me a pretty good sized string of these old rectangular iron/steel buckles since he knew I did old-timey leather work.
My wife (at the time) later divorced me and married him.
After doing the math, I figure the buckles cost me about $4000 apiece.
Now you know the rest of the story.
:-\ ;)
-
Been wantin' to make an Olive Patent style holster for awhile and finally just decided to do it. Procrastination is he!!.
It's for my 5" Laramie.
(http://img.villagephotos.com/p/2005-5/1013589/IMG_3159copy.jpg)
Good lookin' outfit, Dave. Whadjya use fer dye?
-
HorsePen:
Thanks much.
I used a blend of browns and cordovans, thinned and applied in multiple coats. Hand rubbed/buffed between coats. I like that it creates a nice sheen without being shiny. In reality, I probably never end up doing it exactly the same way twice. I generally just adjust blends, coats and rubbings till I'm satisfied with the finish.
-
Howdy Dave,
Thats a mighty fine lookin Rig! You can be very proud to wear it. Great design and border stamping. Did you make your own stamp?
I love the background setting you used for the picture
-
Thanks, Johnny.
No, it's just a combination of commercially available stamps (don't recall the numbers at the moment) and rolled outside and middle borders.
The background's just a compilation of some stuff I had on hand. Did quite a bit of photography (professional and otherwise) in a former life. Lighting and composition are always the keys. I humbly appreciate the kind comments.
-
Not western, but my sisters turned 50 and 51 this year. They are 11 months apart (Irish Twins) and celebrated together. I made them each a purse becasue I being their younger brother, I am cheap and I had the leather. So do you guys turn your hobby over to more modern pursuits? I have made one for my wife as well.
(http://i22.photobucket.com/albums/b349/Mogorilla/purse010.jpg)
-
So do you guys turn your hobby over to more modern pursuits?
Absolutely. Recently most of the time I've spent on leather work has been for my cowboy leather as I've needed a few items that I'm too cheap to buy, but I make bill folds and belts or anything else I need (and am too tight to buy) :-[
-
Howdy
I still make gifts but my leather work is my full-time business along with the leather supply store.
The cowboy gear is just the tip of the iceberge of what I make.
WC
-
Nice gifts, pard. They look like they are good, usable works. They'll certainly appreciate those.
So do you guys turn your hobby over to more modern pursuits?
You bet. I like all leather stuff but the cowboy things are my favorites. Sometimes that bleeds over into the other things I make.
-
OK pards, it is time to show off your talents. I would like to see pictures of holsters, belts, sheaths, etc.... that you have made yourself. Let's see what ya got!!!!
Howdy All
Here is a belt I just finished for my trip to the Sheridan Leather Show.
WC
-
Looks good, pard. I like the black background to offset the floral design. I've always used a seeder in the curled shoots but I like the look you got without it. That offsets the busyness nicely. I may have to try that next time.
-
Howdy WC
Will again beautiful work Pard , it doesn't get any better than this , nice design, the tooling is deep and really stands out, I hope you WIN at the show. :D ;D ;D ;D
tEN wOLVES ;) :D ;D
-
Sweeeet!
-
Nice design and tooling job on the belt. The lack of flowers and only leaves and scrolls sure didn't hurt the design none. I like the contrast of dyed backgrounds myself and the relief in the design surface caused by the open spaces on the scrolls add to that contrast. I like it. Good luck at the show, WC.
X Horse Pen
-
Hey, WC:
The contrast is striking. Nice lookin' piece for sure.
Best of luck at the show, pard.
-
Looks good, pard. I like the black background to offset the floral design. I've always used a seeder in the curled shoots but I like the look you got without it. That offsets the busyness nicely. I may have to try that next time.
Howdy
Thank you for the kind words.
On a fern swerl I put a seeder also, this is a turn back leaf design by Bob Beard and it should not have the
seeder.
WC
-
On a fern swerl I put a seeder also, this is a turn back leaf design by Bob Beard and it should not have the seeder.
Thanks. I see the difference. I'll play with that.
-
Here are a few pictures of a Shoulder Holster Rig I made for a friends Pocket Pistol.
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0330.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0331.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0335.jpg
-
Howdy Johnny
That's pretty nice pard , looks like it fits well too , is that a 5 shot S&W, in the holster, looks like one of mine , any who, you did did well on this and bet your friend is happy too. ::) 8)
Take care Pard ;)
tEN wOLVES ;) :D ;D
-
Hi Ten Wolves,
Many thanks for your kind words.
The pistol is a five shot H & R Arms Safety Hammer Double Action.
-
Hidy Johnny, that stamp makes a nice simple border. Simple but elegant. I like it and just might have ta use that 'un myself.
Thanks for posting the pictures,
X Horse Pen
-
Good lookin' shoulder rig. :)
-
Good job, pard. Interesting pattern/design.
-
Looks good, Johnny. I really like the simple design. Effective. Thanks for sharing
-
Here are a few pictures of a Shoulder Holster Rig I made for a friends Pocket Pistol.
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0330.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0331.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0335.jpg
What is the measurements on the belf or strap of that rig? That might look good with a snubby Remington stuff into it. I like the design, very simple looking.
-
Howdy TT,
Attached is a drawing showing the dimensions. I would guess my friend is around 5'-11" and 200 lbs. If you decide to make one up, it might be a good idea to mock up the strap length with heavy twine or scrap leather. I have the patterns available if you would need them.
Please let me know if you have any questions.
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0338.jpg
-
excellent drawing. I am currently working out the final shape of a holster for my snubby when I get time. I am about the same height and weight as your pard, so your drawing is most helpful. Thanks Johnny
-
This is the first holster I've ever made for a pistol....
(http://people.consolidated.net/mwilkins/pics/forums/slimjim08.jpg)
(http://people.consolidated.net/mwilkins/pics/forums/slimjim09.jpg)
Then with my trusty VERY used CONSEW 227, I made a "practice cartridge/money belt... The learning curve here is steep... I just used some leather scraps but the idea was to sew a billit, some loops, the fold over etc... I just love these stupid things! guess I could wear one to Church or the movies as I wouldn't have much call to wear one at all...that'd be without the pistol of course.
(http://people.consolidated.net/mwilkins/pics/forums/slimjim10.jpg)
(http://people.consolidated.net/mwilkins/pics/forums/slimjim11.jpg)
I finally got two of these loops sewn right (the critical top'n bottom "across" stitch which you gotta do so's to get to the next loop. The rest look like steps to a haunted house.... but I'm learning! ;D
(http://people.consolidated.net/mwilkins/pics/forums/slimjim12.jpg)
My home made background stamp. Hand drilled, filed out, hardened and tempered. The one next to is is "Tandy Trash"...
(http://people.consolidated.net/mwilkins/pics/forums/slimjim05.jpg)
-
ANVILRING, :o :o :)
AWESOME JOB ! :) I love it, I have not got to the carving part yet, I have a long ways to go!
I can only hope my first carving looks half that could!
Great Job, Thanks for Sharing!
ACE
-
Cool holster. Did you happen to use a dremel to make your stitching holes?
-
Nice job anvilring, it has a nice early period carving look to it common to the "slim jim" or California styles of the day.
-
Looks good! I like the finish on the holster. Looks nice and vintage. DM
-
Howdy Pards,
Here is my lastest attemp at a Holster rig, I the Dye is Vinagroon, I love it! All the stamps exept for 2 little ones, were ones I made
the belt loops are bad, I am going to redo them someday! I think I am improving each time I do a job i do! :) It was still made with all scrap, the holsters are 11oz veg tanned, the belt I was told was Buffalo? I don't have a clue1
Don't laugh your self to death, but enjoy :o
ACE
-
This is a buckle i bought at a flea Market for $5.00.
ACE
-
santee, I used a well dressed and sharpened awl with a a piece of antler for the handle. I've used a dremel but I had an Amish man show me how to use a needle and hand awl and was astonished at how fast he could lace up a harness. You have to have a good stitching horse and a properly dressed awl. I sometimes use a little pair of brass lined pliers to pull the needle through really thick leather but a lot of times, you can just pull it through with your fingers! That's the beauty of using an awl the right size for the thread and needle.
I'll post a pic of my home made horse and the awl if you like.
The finish on this holster is the same "Cavalryman's dressing" my former father-in-law (U.S. Army hon. discharge in 39)taught me how to make; simply a mix of bee's wax and neetsfoot oil. When cool its the consistancy of Crisco. You warm it up and put in on with a small paint brush then with the oven at 150o or so, (or just out in the summer sun) it will absorb the rest and leave it darkened, supple and waterproof.
-
Nice border stamp on the holster, Ace. The dye job came out great!
Thanks for the info, Anvilring. I use an awl, too. Post a pic of your interesting awl, sure would like to see it!
-
Howdy Anvilring,
That is a beautiful holster especially for the first one. I like the carving and design. I'm going to have to learn how to carve one of these days. Thanks for sharing this with us.
Howdy Ace,
You are getting to be a pro! Thats a nifty design. Your work keeps getting better and better. I'm happy that you are enjoying this fine hobby.
-
This is a buckle i bought at a flea Market for $5.00.
ACE
Now all you need to complete that rig and gun set up is the "Hand of God" grips! I like the rig.
-
I want to thank everyone for the KUDDO's, I still got to cut off the bullets loops and redo them :-[, and I am going to have to do some thinking on that. i think I am going to make a pair of arm cuffs to match that rig!
Thanks again for the kind words!
ACE
-
Does someone have a good picture of the "Hand of God" grip?
Anyone??
regards, mitch
-
Anvilring,
Go to Will Ghormley's web site. He has a good photo of the "hand of god" gun willghormley_maker.com
-
There's three on Will's site:
http://www.willghormley-maker.com/310toYuma.html
-
Ace:
You're getting better with every piece. Keep it up, pard.
-
Thanks Dave, I am great full for the Kuddo. I just got threw watching the DvD frontier Holsters with Chuck Burrows ! And it was very educational, I only wished that the video of the carving was closer, he made it look easy. he had a tool that I can't find, except for one that was $85.00. It was a stich grover non adjustable the cutter was in the middle with a wooden handle, Dave do anyone else knoow where to look for this tool?
Thanks ACE
-
Good job Ace. Keep up the good work. You are really making a lot a progress.
Thumbs up,
X Horse Pen
-
Hello Ace
Tandy sells a free hand stiching groover, check it out , it has a red handle , this is what I use when there is no border to use as a fence.
tEN wOLVES ;) :D ;D
CLICK ON THIS WEB SITE
http://www.tandyleatherfactory.com/products.asp?dept=210
-
Thanks Horsepen for the Kuddo's I am trying!
TW, I might have to trry one of those, taht handle is so little, I wonder if I could keep it against a strait edge or not?
After got got threw watching Chuck Burrows DVD, I think I will start on a pair of California Slims for my 72 open tops, with the belt loop on the back, I think I will use the Frank James Stamps and a nice simple border, need to get me another adjustable stich groover, been wathing ebay with no luck on a used one! What do you think 1 1/2 belt or 2" belt or? I am thinking, instead of a double crossdraw, I would do to rigs? Be pretty 1800's don't you think?
Have you got to use the vinagroon dye yet? I am going to mix up some of the brown Chuck on his DVD uses it and I like the color!
TW. give me your thoughts on this, I would be great full!
Ace
-
Ace, ya might want to try making some cardboard templates of your curves and use that to be a guide for your freehand stitch groover to make designs in yer leather with. Draw them on some card stock and cut them out with a X-Acto knife then lay them on the leather where ya want to make the curves. Another bright idea would be to by those plastic french curves that draftsman use. You can get them in art supply stores. Is there a instution fer higher learnin' in yer area with a bookstore with art supplies in it? I'll betchya they have those french curves. They'll help ya make all kinds of curves real graceful like. ;D
X Horse Pen
-
Horespen, Thanks a lt for the tip, I only live 35 miles from Joplin Mo. and they have a Micheal's and Hobby Lobby, and i am sure i can get that stuff there> i am still thinking on buying a replacement blade and heating it a little at a time and bend a little at a time untill i get it strait, and i have a wooden handle allready! I watch Chuck slide right down a stait edge with that old tool I am afraid if I buy that tandy pen like groover, when I get done it will look like a snake :o :o
I want to thank all you guys for all the help, and i want to thank MW for starting the fact section on sewing and makingh your own dyes ect. I been researching how to make my own Tan Kote!
Have a good one!
ACE
-
Howdy Ace
Useing the free hand stitch groover with a ruler or straight edge, or following a contour pattern is a piece of cake, don't sweat it pard, it's easy, and this tool is easy to hold on to, even with my big hands. but if you need more bulk , you can always wrap it in leather or just tape, I used to wrap some of my butcher knives with butcher twine, and that work great.
You ask what size belt I would use for the California Slim Jim's, it's a matter of tast, I wouldn't want anything less than 2" but 2 1/2" for me would be better, I'm a big pard, putting a 1 1/2" belt on me, would look like my holsters were tied on with string ( LOL ) SO JUST STEP BACK , and give it some good thought.
If you're going to make the walnut dye , just follow Chucks directions , and you cant miss.
HorsePen Henry's idea of making templates is a good one, especially if you don't have a steady hand, which I don't anymore, my hand gets to shaking sometimes and I have to stop for a while , it takes me longer , but I still get it done, Cowboy style. So HorsePen thanks for that idea. ??? 8)
You Pards take care :D
tEN wOLVES ;) :D ;D
-
Ace!! Nice job! Looks good!
Nice tips on the freehand groover too, Horsepen! I think I will pick up one of those tools too. Meant to get one last time I was there, but ended up with the adjustable creaser/groover instead.
DM
-
:) I want to thank all of you guys I am great full for the tips, And i would advise anyone that is just starting to buy Frontier Holsters with Chuck Burrows. I wished I had of had it before I ever started, I knew some of the stuff that was on the DVD's but I learned a lot!!!! from it :o :o
Dalton, and who ever, there is a never ending list of tools that you need, and the cost :o You can't buy them all at a time, I FEEL VERY VERY LUCKY, those reading this will know why I said that :) After wathing the DVD a peron needs a free hand groover, and if a person could pick up a extra adjustable it would be a great help!
Talk to you all soon, I hope everyone has a GREAT WEEKEND :)
ACE
-
Howdy, pards. After a few days of being without WIFI to get in here, I'm back. It was a long drive home but we made it and things can get back to normal. Glad to see you all have been busy.
This is the first holster I've ever made for a pistol...
Fine holster, pard. I have yet to make one by cutting the design in like that. It really looks authentic.
Now all you need to complete that rig and gun set up is the "Hand of God" grips! I like the rig.
Tommy is right, Ace. That would fit the theme beautifullly. You may even want to put the same cross conchos on the grips that you used on the holsters. Great price on the hardware. Keep 'em coming.
Great tips on the grooving, pards. That's how we all get better.
-
Heres my newest set for my 1860s. Used Will G's Jesse James pattern, and carved in the shield. Need to go back and do some touchup probably after it all has time to cure.
I am hoping it will antique itself over time, and yellow out, get scraped, etc. Thought about doing some rough antiquing with a sanding block, etc, but figure it will happen in time.
DM
-
Oh man, WAY COOL!!!!
-
OH ManDalton! those are gorgeous! actually I'm not sure "Gorgeous" is quite good enough to describe them
-
Dalton...fantastic that's all I can say
-
Beautiful. Patriotic. :)
-
Outstanding, Dalton. Those shields really make a statement. Very impressive.
-
Thank you gents. They took a long time to paint with the Ecoflow dyes. The stars are actually stamped deeply, and in the picture look fuzzy. Could be because of the flash. Its kind of ironic I think that I took the pics on my Confederate vest, but I dont have any Union blue stuff yet. DM
-
Very nice work, pard.
Clean, well-crafted and striking. Great job.
-
Howdy Dalton ::) :o 8) ;D
Man, Pard, these are beautiful, what a great idea, you're all set for any of the Patriotic shoots coming up for sure, and I know how long that must have taken to do. Well done Pard
tEN wOLVES ;) :D ;D
-
10 Wolves, your are correct. Hell On Wheels is over the 4th of July, so hopefully I will be wearing them there. DM
-
:o WOW! :o
What a great rig.
-
Dalton :o :o AWESOME, Those are way to cool 8) I wished I had never got involved in leatherwork, that is all I think of night and day!!! I am wanting to start a new rig, on page 83 in Packing Iron that is what I want to make for my72's, I might start on the belt I am not going to use that design, but I have had a lot of help on what to use for the bottom purdies I was told they call those holsters Pommell, and I am going to use napkin rings, so i went to ebay and had a heart attack, the nice one's are priced out of this world, so it is back to flea marketing and garage sales!!! ??? ??? I don't want to lay out my pattern untill I have those rings. So i guess for now I am going to give carving a shot, going to make me a new pair of spur stramps!!
Marshall Will, I think I will inlay those cross concho's into the grips. I have finaly got the Silver Dollar city Hawes 45's done, and I have cut out some awesome walnut blanks, wood working was my passion, untill I started leatherwork and it smokes working with wood!
I hope evryone a SUPER WEEKEND be safe!
ACE
-
Fer Dalton...
;D Absolutly.... Bloody Brill ;D
Paladin (Whats gobsmacked!! :D ) UK
-
Thanks gents.
Paladin, Thanks I think??! Brill???? ;D ;D
DM
-
Dalton, those are much too purty ta scratch up. Nice looking twin holsters.
Thumbs up,
X Horse Pen
-
Marshall Will, I think I will inlay those cross concho's into the grips. I have finaly got the Silver Dollar city Hawes 45's done, and I have cut out some awesome walnut blanks, wood working was my passion, untill I started leatherwork and it smokes working with wood!
Good choice, pard. Here's a pic of my wife's black rig and matching heart conchos on the pistol grips. You'd be putting larger ones lower down, but the effect will be the same.
-
Marshall Will,
SWEET :o :o :o Great lines just the style for the conchos :o
You Guys that have wifes that go shoot with you, do not KNOW HOW LUCKY YOU ARE :) Mt wife can shoot and not bad, but she could care less about going and shooting like your wifes do :) YOU LUCKY DOGS !
:) I am very happy for you Pards and Pardets
Long weekend coming up, Every be safe and have fun!!!!
Ace
-
Marshall Will, I cant see nuthin! 8) ??? :'(
DM
-
It should be showing, Dalton. Try again after a while. It's saved in the forum software with an iconic link to it so it shouldn't be a problem. If it still continues to hide, I can ask some of the other moderators if they've encountered a similar problem.
-
Howdy Pards,
Here is the latest rig I just completed for a customer. This is the color that I was describing to Crossdraw on the other thread.
-
This is the third photo of the rig
-
::) :o 8) ;D YIKES, AND A WOW THROWN IN ;D
Nice work Outrider, I think you just may have out did yourself again, looks like you may have used Fiebings stain to get that nice color, it really looks good , tell us if you would, how you obtained that look and color ? your work as always is excellant ,Thanks for sharing Pard :D 8)
tEN wOLVES ;) :D ;D
-
TW
It's Feibings Saddle Tan dye. Reduced...1 oz dye to 1/4 oz reducer. finished off with Tan Cote then a little bit of neutral shoe polish
-
Howdy Outrider
That really worked well, i'll have to put this in my book of tricks , thanks for sharing this with us Pard ;) :D
tEN wOLVES ;) :D ;D
-
Man, that is some clean work. Like the color a lot. :)
-
Outrider :o :o :o that is so AWESOME I see now what you have been telling me, that you don't allways have to get wild with stamps and carving when you take nice lines and sweet borders stamps, and then make every thing else flow so well toghter!! Do you get a lot of orders for single gun holsters! I know that there are a lot of diff.CAS shoots and I was just wondering!
Thanks for sharing Outrider 8) 8)
Later
ACE
-
Howdy Outrider,
That rig is simply gorgeous! As usual your workmanship is outstanding.
-
That's a fine rig, Outrider. The lines are clean and the simple border really sets it off nicely. The white stitching and conchos against that color really give it an extra dimension. Thanks for the photos.
-
Very nice, pard.
-
Howdy Pards,
Many thanks for the kind words. It means alot coming from my peers.
Ace, Usually I get orders from SASS shooters and it is for two holsters. This particular gentleman is not a SASS shooter and only has one revolver...that is for now ;) ;) ::) maybe I can talk him into some SASS shooting in the future. By the way he has not seen this rig yet.
-
I bet his eyes bug out when he sees it. It's real flashy and nice workmanship! Real nice!
X Horse Pen
-
:o WOW Outrider!!!!! :o
What a Boooootiful rig !! :D
I think it just oooozes class!!, I think yer pard will be one very happy cowboy!! ;D
Paladin (What reckons Outriders `Da Main Man` ;) ) UK
-
I just finished a couple of projects.
The first is a retirement gift for the park superintendant at Fort Hartsuff State Historic Park, Roye Lindsay. I took my inspiration for it from several holsters in Packing Iron. I made it to fit one of the pistols I knew he had, a 7 1/2" Schofield replica.
-
for some reason it's only letting me post one picture at a time. so here's another view of it.
-
The other project is a set of pommel holsters for the GAF Grand Muster in Oct. They were made to use as a prop on a wooden horse. I used some scraps of leather I had and would have been better if I'd have used better quality materials, but I guess they'll serve the purpose.
-
and another look at them...
-
Pitspitr, that is beautiful!! Very nicely done. I am sure he will treasure it. DM
And, nice lookin pommel holsters! Props are a great way to use up scraps that you wouldnt normally use good leather for. Hope you get a chance to make it to State next weekend. Plan on seeing you at the Cornhusker games..... DM
-
Roye Lindsay must be a heckuva superintendent.
More and more I appreciate why Mom always loved the things her kids made. There's just nothin' that rivals a hand-made gift. Pitspitr, that is one fine gift. I know nothing about leatherwork, but I just marvel at the alignment of the pattern to the edge. If it's a known technique, fine; I just gotta tip my hat regardless.
BP
-
Howdy Pitspitr
Nice work indeed, your tooling is absolutely beautiful, and right on, I know your friend will be overwhelmed, and the pommel holsters should be a nice surprise for your club , they have the look of leather right out of the 1800's, your work seems to be getting better everytime i see it , and i always enjoy your post's thanks for sharing with us Pard. ::) :o ;D 8)
tEN wOLVES ;) :D ;D
-
Howdy Pitspitr,
What a great retirement gift!
Did you give it to Mr. Lindsay yet? I'll bet he will be touched by your wonderful gift.
Great design and workmanship!
Your Pommel Holsters look very authentic. Nice job!
Many thanks for sharing this with us. Look forward to seeing your future projects.
-
I like that stamp you used on the holster. It has a nice open feel to the design in its contrast. The finish makes it really pop. I like the pistol buckets too. Sewing those toe plugs are quite a challenge yet for me. Good work Pitspitr!!
X Horse Pen
-
You're hot, Pitspitr. You really did a good job on that retirement holster. The alignment of the stamping is well done, not an easy task. The overall look is great and anyone would be proud to receive that as a gift. No doubt he'll treasure that one. Great job on the pommel holsters, too. They really look like they're originals. Nice work. Thanks for posting your pics.
-
Great job! I assume you carved those initials?
-
Thanks guys!
Santee; yep they're carved then I used echo flow to block them but they almost look like the dye migrated under the finish block. I had run out of the dye that I had been using and used a different type. I probably won't be using it again when I want to block the dye.
Horsepen; these toe plugs didn't work as well as they usualy do for me since the leather was scrap leather the body was considerably lighter weight than the plug so it didn't stand out the way I'd have liked. Actually the retirement holster is the first holster I've made without a plug.
Johnny; I haven't given it to him yet, hopefully I'll see him this weekend.
Marshal Will and BP; I use a Craft-aid template to make a grid to follow, but even then it's next to impossible for me to get perfect alignment. Even so, I'm a lot more comfortable with stamping than I am with floral carving. :-\ I wish I could do florals like you guys.
Thanks again for the encouragement.
-
Pitspitr,
The reverse is true for me. The two holsters I am working on now are the first two holsters in my entire life I have put toe plugs in. The second one is in easier than the first one. I am warmin' up to the process. The pommel holsters look good ta me.
Question for you guys: How long does it take for Olive Oil to dry and is that the end of the process or do ya put wax on over that?
Many thanks,
X Horse Pen
-
Horse Pen
If you're doing a plug for the first time, one of the biggest things I've found that makes them work better is to make the stich placement closer on the plug than on the body. For instance I use 7 stitches per in. on the plug and 5 on the body. On a 1 inch circular plug that comes out just about perfect. You might have to fudge just a little but not much.
-
Pitspitr,
The reverse is true for me. The two holsters I am working on now are the first two holsters in my entire life I have put toe plugs in. The second one is in easier than the first one. I am warmin' up to the process. The pommel holsters look good ta me.
Question for you guys: How long does it take for Olive Oil to dry and is that the end of the process or do ya put wax on over that?
Many thanks,
X Horse Pen
hELLO hORSE pEN
The olive oil will soak in real quick, I generally do three light coats , with drying and sun tanning in between, then you can buff it with a soft cloth, then I use Skidmores Leather Cream, as a final finish, it will give you a nice natural sheen, after its been on for a hour or two , buff it up, and your done, I love this stuff.. you can do a couple coats as well. When useing olive oil only use EXTRA VIRGIN OLIVE OIL, ANYTHING ELSE YOU TAKE A CHANCE OF IT GETTING RANCID. http://www.skidmores.com/
tEN wOLVES ;) :D ;D
-
Thanks fer the tip on the Extra Virgin Olive Oil and the Skidmore Leather Creme. That extra virgin olive oil is all Mrs. Horse Pen buys so I am good there. She allows me some fer my guns and now the leather. It makes good gun lube too. Ain't she a sweetie?
X Horse Pen
-
Howdy Horse Pen Henry ;D
Sounds like the better half is all tuned in pard , thats how i started out , getting it from the Mrs., but now i have my own bottle in my shop, i think she might of thought i was getting cutties on one she had, oh well thats ok with me , nothing like having your own Extra Virgin, don't ya know.(LOL)
tAKE CARE pARD :) :D
;) :D ;D tEN wOLVES
-
Hey Outrider! I finally finished the 1st holster :)
http://www.iammercy.net/dace/Cowboy/Rayskin%20Holster%20001.jpg
http://www.iammercy.net/dace/Cowboy/Rayskin%20Holster%20002.jpg
http://www.iammercy.net/dace/Cowboy/Rayskin%20Holster%20003.jpg
http://www.iammercy.net/dace/Cowboy/Rayskin%20Holster%20004.jpg
http://www.iammercy.net/dace/Cowboy/Rayskin%20Holster%20005.jpg
Just need to work on the cross draw holster and finish the gun belt and the wife is all set :D
-
Dang Seth, that looks good! Also looks like a tough sucker to sew too. Great work! DM
-
Good job, Seth. I like the simplicity of the design. It really shows the insert off nicely. It'll be nice to see the completed rig. The black really works with it. Keep 'em coming.
-
Thanks pards! I'm really proud of this piece, it was quite a challenge working with ray-skin. The belt will buckle in the back and has a buscadero drop loop on the right hand side that this holster will thread through. 20g shotgun loops in front along with some .32 cartridge loops. I'm going to do some simple carving on the belt and try and inlay a little more ray-skin for effect and add a couple of silver concho's to the base of the billet and chape.
Needless to say I have really high hopes for this rig and more importantly my wife really really like it so far.
-
I thought it looked like ray skin. Super neat looking!
-
Coooool. Is that ray-skin more or less pliable than leather? You mentioned it was tough to sew through, but is it flexible?
-
Howdy Seth,
Beautiful Holster! Great design! You did a great job with the insert.
Many thanks for sharing this with us. Look forward to seeing the completed Rig.
-
Coooool. Is that ray-skin more or less pliable than leather? You mentioned it was tough to sew through, but is it flexible?
The ray-skin is actually quite flexible. The hide itself is similar to gloves leather or garment leather. The "grain-side" of the skin has these little round bumps all over it that look like tiny glass beads. Cutting through those little beads was one of the hardest parts, as was putting stitching holes in it. I had to invest in a Dremel just to get through it :D
I'm really looking forward to completing the rig. I'll get some more pictures up as I complete the remaining pieces.
-
Howdy Seth,
Now that looks really good. you should give yourself an "atta boy" for that holster. That Ray Skin looks good.
-
Heres my newest Ruger set. Built off of Will G.'s Jesse James set. Forgot to use the 5 1/2" pattern, so have stubby holsters. Will probably sell them or donate them to our state shoot and make me some longer ones.
Finish is EVO and a few days at work riding on my dash in the sun. Topped with a coat of Skidmores.
BTW, I found Skidmores at Corral West Ranchwear in our local mall, if anyone is trying to find some. It was by the boot polishes. DM
-
Howdy DM,
Those look GREAT!! Somebody is going to be real happy!! ;D ;D
-
:D ;D 8) excellent, Dalton nice work pard, their beautiful , and you said you couldn't carve leather, will you can't say that now, WEEEEELLLL DONE ;) :D ;D ::) :o 8)
tEN wOLVES ;) :D ;D
-
Hi Dalton,
Beautiful Holsters! The finish looks great!
Never thought to leave them on the dashboard for the sun-tan treatment. Good idea.
-
I did that Johnny, so that I could flip them every hour to get both the inside and outside tanned. I didnt stitch them until afterwards. DM
-
Good lookin' old style toolin', Dalton. Those are cute lil' holsters fer sure!!
Nicely done.
X Horse Pen
-
That's a fine pair of holsters, Dalton. Nice work. Good tooling. Great color. Those will make someone very happy, I'd say. They look good as shorter holsters. Thumbs up. Thanks for the pic.
-
Dalton,
All I can say is "DITTO" to what everyone else said..beautiful ;) ;) :D
-
Impressive. The suntan treatment really works well.
-
Howdy Pards,
Well, I have another order for a "Snake Slayer" holster. The difference between this one and the first one is that this one has a safety strap. These little Bond .45 Colt/.410 Shotgun derrengers seem to be getting very popular around here. I think I will buy one of these little derrengers and start making these holsters as part of my front line offerings.
-
Howdy Outrider ;D ;D
Very nice pard, clean lines and stamping, you should do well with these. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Nice Holster, Outrider. It looks like the strap is a good addition. Now you have an excuse to order one of those little poppers. ;D
-
Howdy Outrider,
Beautiful work on your Derringer holsters. Thats a nice neat design! The stamp you have used in my favorite.
Many thanks for sharing this with us.
-
Dalton, SWEET Pard :o :o, Grest Garving and the color is awesome. When Can I come up to Nebraska for my carving lesson???? :o ;D
Outrider, that a little Honey to!!
Ace
-
Howdy, Pards,
New guy so here goes:
dumb question #1: is there anyplace where all the pix from this thread have been posted so i don't have ta wade thru all the "gee, that's some purty work" posts? Not that there's anything wrong with that and there are some interesting tidbits of advice, but ya got 4 years worth! :o :o :o :o
dumb question #2: if'n i wanna add a hammer thong to my slim jim cross draw (that i did not make myself, that'll come later) what's the best way to do it? thru the holster or the belt loop? same fer a tie-down on a strong side holster
gonna get some supplies and advice and maybe, jes maybe, post my own pic one of these years
-
Welcome, Jethro. There isn't any place with all the photos packed away all together. Maybe there should be, but we haven't figured out how or where to do it. Looking forward to your posts and certainly any photos you have.
-
Muchas gracias, Marshall. Now, what about dumb question #2?
JBJH
-
This is just my opinion so take it for what it's worth. It won't cost ya any more......I think the loop over the trigger is a hollywood thing or at the very least a 20th century thing. I fit holsters real snug and they come up high on the revolver like the old timers made 'em. I haven't lost a pistole yet and I don't use loops or straps. It is my opinion that if the holster fits right there ain't nothin' ta worry about. 'Course...I don't do quick draw McGraw stuff so a snug holster is fine for me. If yer a quick draw artist with not much holster for the gun.....ya might wanna put a hammer loop or a snap strap on yer holster. If so....bring it around from the back side of yer holster and up and over the hammer just below the spur. A rivet will hold it from the backside of the holster. A trigger loop will come up the same way. Just poke a hole and tie it in with the knot on the backside of the holster.
Just my 2 pesos,
X Horse Pen
-
I don't put hammer thongs on either but if I was going to, I'd punch two holes along the fold of the holster where the topstrap of the pistol is. Then I'd thread the thong in the top one and back out the lower one. A snug fit will keep the pistol in and you can tighten it by pulling down on the thong. For a tie-down, You can punch a couple holes in the back and run that thong in one, out the other and then tie it off leaving the ends long enough to go around your leg. The holster in the photo has an open toe so I just ran the thong out the toe. I've done them with two holes like I mentioned if the toe is closed.
-
Thanks, Will and Henry...good points all. I know this is not the proper thread for the question, but I jes' thot I'd throw it in and see if'n anybody thru it back out! :)
I have a 1858 Remmie .36 with 6 1/2" barrel made in 1970 by EuroArms, so the frame is a bit smaller. Til I can make my own, I bought a cheap holster at a local gun shop but it's cut for the larger .44 frame. Pistol threatens to fall out if I leave it in when I take off my belt. And the holster is a good 2" longer than the gun! As for the slim jim, I have a .44 Remmie with 5 1/2" barrel so it fits better, but same problem when taking off the belt. Jes' wanna pertect my firearms.
Thanks again, pards!
JBJH
-
I don't put hammer thongs on either but if I was going to, I'd punch two holes along the fold of the holster where the topstrap of the pistol is. Then I'd thread the thong in the top one and back out the lower one. A snug fit will keep the pistol in and you can tighten it by pulling down on the thong. For a tie-down, You can punch a couple holes in the back and run that thong in one, out the other and then tie it off leaving the ends long enough to go around your leg. The holster in the photo has an open toe so I just ran the thong out the toe. I've done them with two holes like I mentioned if the toe is closed.
Off set the holes form center between the topstrap & the cylinder. No wear that way.
WC
-
Off set the holes form center between the topstrap & the cylinder. No wear that way.
Good tip. Thanks, I'll remember that.
-
Offset it to the back side, then it can be tucked out of sight if ya want.
Welcome Jethro!!
DM
-
About a week ago I posted a picture of this border on the Border Library. I finally got it done and here is a picture of it. For the finish I used Leather Glow and EVOO and as much sunlight as possible. The storms this spring has slowed things down some.
(http://i34.photobucket.com/albums/d133/lennowenoxie/P6090030-1.jpg)
X Horse Pen
-
Three thumbs up. It's that good.
BP
-
Howdy Horse Pen
This holster is beautiful Pard, i like the way you use your tooling stamps on the borders and the seeding stamps really give it a different but really nice look, everything seems to tie end to one another, and flow from the top to the bottom, the rosette's are perfectly placed, and useing a basket weave in combination with the border stamp to encircle the rosette's makes it all come together. WELL DONE PARD, again my hats off to ya... ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Hey Guys,
I usually don't post photos of projects, but this one is different. I was asked to make a couple of reproductions of the rig worn by Johnny Ringo in "Tombstone". I couldn't find the conchos anywhere, so I ended up makin' 'em myself. I'm pretty happy with the way they turned out.
Will
-
HP,
That is one PUrdy holster to have made there HP. I knew the frst time saw the starting is was going to flow and be awesome :o
Mr Will, Do you have a better pic on your web site? I know that every forum has a liminted band space to use! I would like to see a closer look thet look mighyty fine to me. If they are not posted, maybe I could twist your arm in sending me a email with a bigger pic, if you don't still have my email pm me and I will send it to you.
Thanks ACE
-
HorsePen, thats purdy fer sure. I like it a lot!!
Will, you did a nice job on them there conchos. Whole thing looks pretty good as usual! DM
-
Very, very nice work, X-Pen. I like the color you ended up with. Nice contrast between the rosettes and the more linear border/background work.
Hey, Will. That really looks great. I also would like to see a close-up of those conchos. Let us know when it's on your site. Is that holster close to the original? It looks similar to a few I've seen in collections.
Thanks to you both for the pictures.
-
There ya' go. This link is about the best I can do for a larger picture.
Will
http://www.willghormley-maker.com/Photos.html
-
Howdy Will Ghormley ;D
Nice work pard, picture off your web site shows the detail much better , I like it , and the conchos, you did a great job on them too, I'm a push over for the bling , i've always liked this style rig, what did you use to get the brown color you finished with , I really like that. Thanks for sharing Pard. ;) :D ;D 8)
tEN wOLVES ;) :D ;D
-
Thaks for the link, Will. I like the conchos. They work really well. I like the angle on the toe. It carries the trigger guard part of the pouch down into the rest of the holster. The low straps on the skirt gives it a very different look, too. It makes me want to go a little outside the box on one of mine soon.
-
Will,
I was following your customer's requests/needs on another forum and it appears you are going to give him precisely what he asked for (and much more). Congrats!
Gonna add those conchos to your inventory? I'm sure you'd have interested parties! :)
-
Howdy Horsepen & Will G,
That is some gorgeous and inspiring work Pards!
Many thanks for sharing this with us.
-
WG, AWESOME, :oAWESOME, :oAWESOME :o
What great design lines :) the silver work is unbelievable!! I know this isn't a cowboy word but,thats COOL 8) 8) 8)
Only in my dreams will I ever be able to do something like that!! That curved toe set that rig off like a new shinny penny :o
Thanks for posting that link, i knew when I saw the small pic's i had to see a close up!! I know that you never blow your own horn and I have also notice that there are others on hear that don't!! But this topic is to so your stuff and isn't a bragging area, it is a place to show off your art!! That away you give people like me the desire to want to improve on our skills!! This isn't a over night thing to learn! But there are a lot of pards out there that live in the sticks like me, and without the internet and all the GREAT PEOPLE on here, helping beginners like me and others, I might of quit after my first holster!!
But I didn't because of pards like you and everyone else sharing idea's and helping everyone, it is like haveing a private teacher who looks outside the box, and you get answers from several diff. pards!!!
I hope this Topic never stops!!! When I am having one of those days like yesterday when i couldn't get out of bed, I get on here and I look and study and ask questions, and then it doesn't seem like I have wasted a day of my life!!
Because this is how I look at a person life is this, for today will never be again, so you make the best out of TODAY, so that if you can, you will use the knowledge that you learned today for tomorrow!! For everyday you do nothing, you have lost a day of your life!!
I want to thank GOD and each and every member on here for being a part of this group, and also for allowing me to be a part of it!
ACE
-
Hey Guys,
Thanks for your kind words. Marshal Will, this holster is a big departure from what I usually do, but the customers want what was in the movie. I would "improve" quite a few things about this holster, but then, it would look more like the rest of my gear. I would have even changed the conchos to make 'em lay and look the way I think they should be. The point bein', personal taste is what adds the variety to the industry. There is so much to learn from studying and copying what others do, then incorporating what we like about it, into our own work and makin' it ours.
When I see someone take one of my patterns and use it as a spring-board for their own designs, I feel like I have really contrubuted to the whole. That's the point of why I even bother.
Santee, as for addin' the conchos to the mix, I'll get around to it. The problem bein', I love to create, but I hate doin' business. I'm gettin' close to starting my DVD line, but I don't want to sell 'em. I don't have the time to sell stuff, I'm too busy workin'! So, I've got to iron out my supply bottle-necks with my sources, find outlets to sell stuff in the volume needed to pay for the stupid projects I take on, and not run out of mortgage payments in the meantime. Man, I hate bein' in business. I wish I was in the high country mendin' fence, checkin' on the calves and lookin' for cat tracks. Life was so much simpler then. Of course, I couldn't have had eight kids and gotten where I'm at if I'd'a stayed on the range, (my wife is partial to her hot and cold indoor plumbing!). Oh well. Am I gripin' now? Sorry.
Will
OH! I forgot to talk about the coloration. I mixed Fiebings Professional Oil Dye, Black, 50/50 with Extra Virgin Olive Oil. It doesn't give a uniform coloration and you have to shake your container real good before you use it, but it's quick and easy and gives a good "used" look right out of the chute.
-
Great lookin' work, pards.
-
Thanks for all the good words, friends! A fella gets a lot a encouragement from you guys here in the Leather Shop. :D
Will, thanks for the tip on mixing the oil base dyes in with the EVOO. Keep up the good work. I am thinkin' about using some spots and conchos (maybe) on a set a saddle bags. I have your single strap pattern. Good patterns.
Many thanks,
X Horse Pen
-
So I've recently been bitten by the leather craft bug, and here's my first attempt at holster makin'! It turned out ok, but there's definately some things I'll do differently next go round.
Any and all comments and criticisms are welcome as I need all the input I can get. There are really some great artists on this board, and any suggestions you could offer would be much appreciated.
I used a saddle tan gel antique and super sheen for the finish. In my opinion, it looks a bit "plastic-y," so again, all advice welcome!
Thanks for the great forum!
(http://i292.photobucket.com/albums/mm12/magnolialeatherworks/Holster.jpg)(http://)
-
It turned out okay :o You make me sick :) I been playing with the leather and I mostly will never make something that nice!!
Very nice Holster MS :o :o
Later ACE
-
Good holster, Sam. Really good for a first one. To avoid the plasticky sheen, I just use just dyes and oil finishes. That retains the natural leather luster. To get a slight shine on the highlights, I rub the piece briskly with a cotton cloth. The tooling is fine and the stitch line is nice and straight. Can't wait for your next one. Thanks.
-
Helluva first attempt!!! ;D
-
Howdy MS
For this being your first holster , you did well Pard ;) :D
tEN wOLVES ;) :D ;D
-
I've never made a holster, although I have a S&W 357 I'd like to make one for. I'm hoping I might learn something about holster making on here. I've been playing guitar for going on 46 years, so I pretty much stick to making guitar straps. If anyone cares to take a look, I put up a website a few months ago in hopes of turning this into a little business
www.brookwoodleather.com
-
Nothing like a nice wide strap to hold up a Les Paul. Where's the signature Skydog strap? ;) Very nice web site.
You will find a lot of useful info here from a bunch of enthusiasts, I'm sure.
BP
-
Nice stuff you have done there with the gutar straps. Looks like fun. As to learning about holsters, this is a good place to ask questions and such. Cruise through our FAQ thread and click on the links there to read some great tips and get some ideas:
FAQ / HOW-TO / SUPPLIERS / IDEAS (http://www.cascity.com/forumhall/index.php?topic=13207.0)
-
Howdy Mississippi,
Welcome to this forum. That is a one beautiful first holster! My first holster looked like something that came with a kid's cap pistol set.
Look forward to seeing your future work. Many thanks for sharing this with us.
-
Nothing like a nice wide strap to hold up a Les Paul. Where's the signature Skydog strap? ;) Very nice web site.
You will find a lot of useful info here from a bunch of enthusiasts, I'm sure.
BP
Thanks :D
Who or what is Skydog???
-
Skydog was Duane Allman's nickname. I did a search and the original designer still makes one ($300), so it'd probably be a bad idea to offer one for sale yourself. But for inspiration, here's a pic of the new version and the original in action. Note the carving! The original sold for $15,000 recently...
BP
-
Did that feller smash 'is finger? :o
-
Naw, that'd've been Pete Townshend.
This guy's playin' the blues and ya can't do that without the look of pain & anguish on your face, especially when bending up to hit the high notes!
BP
-
Here's the latest from my bench. This is the first one I have dyed. Usually I do the suntan and evoo but this gun called for something different. I had some trouble with making the pattern. The usual formula for a gun with a triggerguard didn't work here. I had to make it bigger across the top. The frames on these Paterson's are a lot blockier than the later pistols, too. Anyway, I got it done. I am considering antiqueing it a bit more.
(http://)(http://i34.photobucket.com/albums/d133/lennowenoxie/P6140031-2.jpg)
I have a set a Slim Jims for a pair of 1860 Army's in .44 on the bench right now. I'll show 'em to ya when they get done.
Happy Father's Day fellas,
X Horse Pen
-
Horse Pen,
WOW!! That is GREAT!! I like it a lot. ;D ;D Happy fathers day to all! ;D
-
Nicely done!! Like the stamping.
-
Fine look. Great color. Straight out of Packin' Iron.
BP
-
Fer.HorsePen Henry ..........
Your skills are superb pard!! ;D That is one.... Boooooooooootiful Holster
Ol Rooster Cogburn GB used ta make all my rigs etc. but for some unexplained reason he`s decided ta quit :(
If sometime in the future I wuz in need of a new rig would you consider making one fer a pard on the other side of the pond ::)
Paladin (What lurvs HPH`s work :D ) UK
-
Howdy HorsePen Henry ;D
I really look forward to seeing your work pard, you put a lot of thought into everything you do, and it really shows in the quality of your work , your tooling and borders are one of a kind, I like your use of the seeder stamps, it's a nice touch, the color on this holster came out real nice , it looks old but well kept. :D
Thanks for sharing ::) :o 8)
tEN wOLVES ;) :D ;D
-
I am glad you all like it. The Packing Iron comment was a nice sentiment. That is kinda what I had in mind when I made this holster. I still need to get that book. It's on my list.
To Sir Paladin, I would be honored to make ya a rig. A feller never has enough guns and they all need their own rigs to go with 'em. ;)
You guys are a great source of encouragement.
Many thanks,
X Horse Pen
-
I'll second the Packing Iron comment. That is one nice holster. It totally fits the piece. I love the color and the design you put on it. Just enough to make it interesting but not so much as to clutter it at all. Well done, pard. Beautiful work.
Just to show you how easily it could be from PI, here's a photo of a flap holster I scanned in from the book. You captured a very similar feel with yours.
-
Howdy HorsePen,
Congratulations on another beautiful job! Simple but very elegant. Great worksmanship and finish!
Thanks for sharing this with us.
-
Thanks for the scan, Marshall Will. That is a fine looking holster. I was thinking about putting a flap on it since there is no trigger guard to help keep Lil' Lilly in her holster. I have read that the slim jims came from the idea of the flaps being cut off of the flap holsters out in California. I think that was a tidbit I picked up out of Will G's Forty Niner Pattern pack. I'd like ta make one like that sometime.
Many thanks guys,
X Horse Pen
-
Horsepen, thats a beauty!!! Hope to see it in person sometime. DM
-
HP,
That one Purdy Lookin Holster, Just like TW was telling me the other day, a person doesn't have to get wild on the stamping, to make a Beauitull Peice Of ART :o I realy like the color like MW said, if you don't mind me asking, what did you use to get that color? Those will sure turn some heads when your out on the range!!
Thanks for sharing!!
ACE
-
Thanks Dalton. We'll probably meet up at a shoot some time either here in Kans. or up in Nebr. I am lookin' forward to swapping lies and recipes with ya.
Ace, I matched the med. brown fiebings with Laurel Mountain Forge stains and dunked it in a tray like Ol' Chuck said. I think they are both pretty much the same stuff. They smell the same anyways. I also used the belly around the front leg portion of the hide so I could have some a those natural fold lines in the holster. It helped make it look used a bit. Glad ya like it.
X Horse Pen
-
:)HP, I think that it is a combo of color , style and simplicity, but with elegant lines :) :)
I am still plugging along on the Pommel rig, our humidity has been 94 and up for at least 5 days, I likely sponged to small pieces of leather both sides to test some stamps, and after 3 hours they still wern't ready!! >:( >:(
Tomorrow lays another day, i am hopeing to use the pony tomorrow, will be my first attemp at sewing with 2 needles, i have been using thoses awl for awl, but I think it is time for me to grow up ??? ??? Wish me luck!!
I have to get this rig done, I have a Factory made Hunter belt with loops gave $40.00 new, and I have a holster cut out for it, want to get it done, so I can start on a mule I need to get delivered! I hope you don't mind I might copy your design on this holster not exact, because I can't do as good as you do, but i dont want to tie al lot of time in it not knowning what it will bring!
Thanks for the info!!!
ACE
-
Ace, yer a daisy if ya do!!! ;D
Naw, heck....I don't mind ya using a design or borrowing from it at all. Artists have been influenced by each others work for centuries. I don't own it. Matter a fact, I may have been influenced subconsciously by thumbing through that book a couple a times. Heck, I'm flattered. Good luck on yers!!!
X Hores Pen ;)
-
A copy of the one I held funeral services for. There was a brass bar in with the spots that I decided to throw up near the trigger guard curve.
Also tried a little of Chuck's distressing technique (think I need a little more).
No, that Colt doesn't have gold plate, it's the flash! :)
-
I lke that design of holster, Santee. It has good visual balance. Glad to see you stayed with that. The distressing is nice. Perhaps a little more will look even better. If you do more, be sure to show us how it looks. Lookin' good, pard. That pistol sure would look good in gold, eh? Thanks for the pic.
-
Thanks, Marshall.
I think I will distress it a little more. Incidentally, that color is Fiebing's LIGHT brown (weakened 50% with isopropyl). Look how dark that came out!
Promise to take a better photo, also. ;)
-
Howdy Santee :D
Pard your work is coming along leeps and bounds, everyone you post, you show more polish in your work, you did a great job on this holster, i've really started to like this style holster since Horse Pen Henry, posted his, and now yours, it looks antique, and i like your border tooling, spots, and the color you came up with , when i've used Fiebings spirit dyes, i've never been able to get the color i wanted , thats why now i always do a compleat finish ( the way i'm going to do it ) on scrap leather, and even thats fooled me. ??? Oh yea, NICE GUN
Take care Pard, and keep up the good work ::) :o 8)
tEN wOLVES ;) :D ;D
-
Santee, :o
Very nice, i like the style and the half skirt, i have been going to try that one of theses days, also what to make a Dodge City rig, but i want to wait untill I have a new pair of pistols to put in it!
Great job!! Keep it up!! :) :)
ACE
-
Howdy Pards,
Seemed Like it took me a life time, but I am almost done with the rig! Havn't put on the bottom metal, still not happy with what I have found! Might leave them the way they are!
Here it is!
I see you guys carve or super cool stamp a rig out in a day, and I thinking how in world do they do that? I think that this is my nicest yet I give a lot of thought to it, plus help from the wife and TW on design! I will try to do better on my next rig, it most likely will take me longer than this one! I learn from you pards and then by doing! This was made out of scrap veg tanned leather 11oz, the buckle and tounge 50 cent gararge sale! Someday , since I have bought some none scrap leather, I will make one out of good stuff! Far cheaper to to practice on scrap that store bought! The dye is from TW homebrew deep brown, the finish is, Beeswax and Olive Oil, then when it dyed, I put a light coat of pure neats foot oil!
Thanks for looking
ACE
-
You guys have been busy. Santee, that holster turned out real nice. I like the warm color of brown and the stamping is placed accurately. I am partial to spots on leather wok but have not done any as of yet. Nice job.
Ace, your double rig looks real good. Your work is coming along just fine in my opinion. I think the design is a well balanced one and turned out real fine. I don't think it really needs the holster rings but I guess you can save that for another time as you find them. Keep up the good work!!! I'm eager to see yer Dodge City holsters. What kind of guns are you expecting to get for that rig?
Cheers,
X Horse Pen
-
HP,
I am going to get rid of my cartridge 44's and i am going to buy a pair of 1851 Navy US Marshalls in 44 C.B. go to Cabela's and look at them. I just feel in love with those the minute i saw them! i have never shoot C.B. but I can learn, and no more shoots that I go to, I won't be shooting them very much, i like shooting my Taylor 72's 4 3/4" barrels 38's and they are point and shoot. They make conversions for the 51's but i don't think i would spend the money! I wished I would of got into this 20 years ago!
Thanks for the kind words HP!
ACE
-
Howdy ACE
Will Pard, it was worth the wait , it came out beautiful, and like you said I think it's the best yet, the color is beautiful and your choice of stamps for the holster and bordering really complement each other, and it looks great just the way it is , it doesn't really need the metal cups at the bottom, but who knows maybe you'll fine something down the road that you really like , and then make another one , or maybe you could even put them on these. The leather looks natural and rich, you did a good job with your finish , I'm VERY PROUD OF YOU PAL. ::) :o ;) :D 8) ;D
Keep it coming Pard ;D
tEN wOLVES ;) :D ;D
ACE, send me these pictures to my reg. e-mail address, i want to put them in my CAS SCRAP BOOK , If you don't mind
-
Ace, you deserve them. You doing good work. Say....if ya haven't shot cap n ball revolvers before, you'll have a blast with them. Literally, they are a hoot. Be sure to get snug fitting caps and grease over the balls. Or ...grease wads under the balls. You'll do fine!!! I still need ta get down there and see ya one a these days.
X Horse Pen
-
Thanks for the input, guys. :D
ACE, that looks terrific! Great job (I like the cartridge belt, too).
-
Ace, I gotta say that is a fine looking rig!! You should be proud! It looks like all this information you have been gleaning is starting to come out and make itself useful. Good job!!! Wont be long now and you will be posting photos every other day of your newest rigs.
Santee, yours looks pretty good. If you want to lighten it up and distress it at the same time, use some 400 or 600 grit sandpaper or emery and LIGHTLY go over the top, highlighting any edges, scars, etc. Make sure your gun is in it when you do it, but dont scratch your gun. Just remember that this will scratch up your top finish, and may take several times of sanding and topcoating to get what you want.
DM
-
:)I what to thank each and everyone on this forum!!!! :) :) I would still be on my second holster if it hadn't of been for the kindess people in the world :o 8) A person would have to read day and night for months, to get the info a person can get herte in one day!
I must admit I am ate up with the leather crafting, I think what I like the best is that you can look threw the Packing Iron Book and see something you like and make it, or see something you like but want to change it! And if you don't know, how to do something, just ask, and there will be someoe tell you! I am trying to trade a guitar amp for a amll vertial mill, if I get it, I will be able to make some stamps that you can't buy! Anyone that wants to come down and visit, i have a 24foot fully self contained with heat and air frig, cook stove and bath room with shower, come on down!
Most likely, I have a few gun belts that I need to make nice sellable rigs, when I get those done and a few other projects, i am going to make another give awaygig made out of med brown Buffalo.
Better go
Thanks for the kind words
ACE
-
Excellent job Ace
curley
-
Santee,
Thats a beautiful holster! It sure looks like a holster you would see on the pages of "Packing Iron" I like the design and how it fits around the trigger guard.
Ace,
I certainly echo all of the other Pard's sentiments. That is a great rig and you can be very proud of your work. You have come a long way. Your enthusiasm, persistence and attitude is an inspiration to us all.
-
That is a great rig and you can be very proud of your work. You have come a long way. Your enthusiasm, persistence and attitude is an inspiration to us all.
Echo that! If I improved as quickly as you have my would be perfect by now. (well maybe not perfect, 'cause there was only one guy that was ever perfect and they killed him for it; but close anyhow)
-
Wow you miss one evening at the computer cause your sitting on the stiching horse and a couple nice beutiful projects turn up on the forum. Really nice work Santee that holster is just right color and bling. Ace those holsters look great your getting up to pro status here. I am going to be asking you how to do things soon.
Johnny Dingus
-
Wow, Ace. Nice work. Balanced design and a good choice of color for the amount of coverage you have. Just the right amount. You're right, they stand on their own without the tips on the toes. All this from the guy who was hesitant to start in. Looking forward to seeing the next ones.
-
:) I am so happy that you guys liked that rig,it took me along time, not so much to make, it was how I wanted to put the stamps and what ones! I was going for something in the 1840 pommel's but, the pommel's have a lot more round ness in the toe, so I did a little more tooling than the 40's but tried to flow it all toghter with a semi floal with a little cowboy flare.
And the real truth is it IS YOU PARDS THAT HAVE KEPT ME GOING :) :) If ithad not been for the kindness of you guys and all the help you have gave me, i will still lay in bed evryday feeling sorry for my self! ::) ::)
But with the spark and you pards answering my question without giving me a hard time, like on some other forums, you all have gave me a reason to get up, no matter how bad it feels and go out and work on something!
And it I that Thank YOU :) :)
You all have a good evening.
ACE
-
Ace:
Looking better all the time. Nice job.
-
Well boys, Ya remember Lil' Lillie? My 1839 Paterson? I finished a belt for 'er today.
(http://i34.photobucket.com/albums/d133/lennowenoxie/P6170034.jpg)
I just thought maybe I'd surprise 'er. :)
X Horse Pen
-
;) :D HP, that's a a nice looking rig pard, your design and use of border tooling really sets it off, and complements your holster at the same time. Well done.
tEN wOLVES ;) :D ;D
-
HP, :o That Rocks!! I told you when you made the holster how nice it was, strait out of the book!1 And the belt is just the tip of the ice cream cone!! Love it, anyone would be pround to wear it!
AWESOME RIG
ACE
-
Horse Pen,
That is one GREAT looking rig! Everything is JUST RIGHT!! ;D ;D
-
Outstanding, X-Pen. I like the way you cut the billet with the square tip to match the holster. Nice touch. Great match for a great holster. Thanks for the pic.
-
Horsepen,
Nice coloring and tooling! Question about the belt is that one layer of leather or two?
Johnny Dingus
-
Johnny, the belt is one layer and is 9-10 oz. veggy. The holster is 6-7 oz. veggy. I like the lighter holsters personally. The old time holsters tend to be lighter than many makers use nowadays. But that is everyones preferences at work. I surely appreciate the lot a ya. Yer a great bunch to hang with. Thanks for all the compliments and comments.
Cheers,
X Horse Pen
-
HorsePen, that really came together nicely! Looks great and vintage! Well done. DM
-
Real purty! Wonder if one of Will Ghormley's brass buckles would be too much for that rig?
-
One of Will's new clip corner buckles would look good on it. :D
-
I have one of Will's silver ovals coming as soon as the foundary gets a roundtuit. Nice buckles fer sure!!!
Waitin' on leather to get just right fer stamping and tooling is like watching water boil. ::)
X Horse Pen
-
Fer Horsepen.............
Absolutly....
B ooooooooo oooooootiful
Paladin (What lurvs HP`s work fer sure :D ) UK
-
marshal,
Is Will making clip corner buckles, now too?? :o
-
X-Pen
Good lookin rig son......
WC
-
HorsePen:
Yep. Very nice, pard. Gotta good "old-timey" look to it.
-
Is Will making clip corner buckles, now too?? :o
He's just getting them going. Give him an email or pm if you want in the first run.
-
There is a lot of nice gear been posted here since my last post so i thought it was about time i got a pic up again, this is a set of 1884 m saddle bags i hope you guys like them, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/M1884saddlebags.jpg)
-
Very Nice!
-
Coool. Nice work. Looks like they can hold a lot, too.
I sure would like to make a set of saddlebags. Hmmmmmm...trip to the leather shop.
-
Outstanding, Don. Crafstmanship of the first order.
A tip o' the hat.
-
Those look great!!
I saw a dispatch bag with a single handle at the top with the same construction sell at an auction this last weekend. It went high. But it was very cool. I wanted to take some pics but the buyer wouldnt let me. Thanks for posting this, so I have an idea of construction! DM
-
The saddle bags look great!! where do you get the brass slots? I have looked for those for some time.
-
Those look great!!
I saw a dispatch bag with a single handle at the top with the same construction sell at an auction this last weekend. It went high.
I'm sure it did they are VERY rare.
-
Wow, Don. Those look truly correct. Great work. I'll have to make a pair one of these days. Thanks for sharing.
-
Excellent saddle bags...very well done
Mo...I think you can get the brass slots at Weaver....if not give David Carrico an e-mail.
-
i have a set of original 1903 saddle bags and also the ordanance plan drawings for the 1884 bags, the plates were from mast harness a few years back i dont know if weaver now do them when they took over, the plates are neary the correct size they are roughly one mm larger i think thats about 1/16 of an inch, the buckles are hand made as the correct one arn avaliable to buy,
here are the plans if you guys are interested, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/M1884saddlebag.jpg) (http://i118.photobucket.com/albums/o112/Don101_photos/1881saddlebaglining.jpg)
-
Wow, those are some nice plans! Thanks a bunch!!
Heres my latest pocket pistol holster for a fellow cowboy. He is a preacher and wanted it antiqued like my Merwin holster, so...... :)
It is the same pattern as my Merwin, but fits my Hopkins and his Smith just fine. DM
-
Hey Dm,
Awesome, design work on the holster, I realy like the cross toolings and the rays comeing from it!
i have to get a spark going here soon! I have a couple rigs to finish up, and then I don't know what i am going to do! I think I am going to play with doing some carving :o :o ::) ::) The only way i am going to learn is to do it! It is so hard to concentrate with Work Comp messing with my mind and my money!
But as you know I have a couple other projects to start on next weekend!
Nice Job
ACE
-
Here's a Mexican double loop rig in full basketweave I made for my son who's just getting into CAS.
-
Howdy Gents
Don 101 , nice saddle bags pard, great color and they really look period.
Dalton your Preacher is going to be real happy to have and wear this holster , nice design and carving , you're getting better with every holster you make, and I like the color an antique look it has.
Kid Sheleen, that's a nice looking rig pard , your son should be real happy, the picture wouldn't enlarge for me , but it looks real nice from what I can see.
Nice work all around Guys
tEN wOLVES ;) :D ;D
-
Ten Wolves...thoase bags are period those plates are out of the Ornance Manual...you can get a copy of that manual from David Carrico. I think it's the 1885 Ordnance manual. I have a set of those bags with my 1904 pattern McClellan Saddle.
-
:D :D ;D Thanks for the information Outrider, much appreciated ;) ;D
tEN wOLVES ;) :D ;D
-
KS :o AWESOME rig, sure would like to see abigger picture, woiuld like to see the border you used!
Great Job! Thanks For Sharing!!
ACE
-
Thanks for the comments guys! Ace, heres another picture of the left side holster. m y camera isnt very good. I just used a standard veiner for the border.
-
And heres my rig! I am a VERY BIG man. This gunbelt is 68" at the center hole with 36 .45 colt loops. It did'nt look right with only 24! It weighs almost as much as my wife. I cut it out of the top of a 22.5 square ft 8 to 9 oz side from shoulder to bend and lined it with the top of a 21.5 square ft 4 to 5 oz side. Took me ten hours to hand sew it. Thats why I did'nt put spots on the belt. I'd have had to take out a loan to pay for that many. There are 45 spots on each holster and I also have a cross draw holster to match. I thought about putting some silver conchos on it but that would cover the hand tooling that took me 2 days to complete. If I ever have to make another one I may shoot myself in the foot!!
-
Fine pieces of work, guys!!
-
Ain't we a busy bunch!!!
Don 101, thanks for the pattern. I was going to ask ya where ya got it but eveytime I got on the computer someone needed something. Real nice work on those bags.
Dalton, another real nice aged up holster job. I like the design, too.
My old tired eyes can't see the other holsters on here or maybe it's the computer I have. I am sure they are great work too. You fellas keep up the good work and keep the good ideas coming. ;D
X Horse Pen
-
:)HP,
I am having the same problem, I wish the new guy to max size his pic's they look AWESOME, but I would like a better look!
But everything is AWESOME compared to my work, but I am not going to quit, I am going to learn how to make nice holsters or die trying :o
Later
ACE
-
Hey Fella's
Been busy remaking the too Long holster to a shorter one. It came out pretty good but I guess you always can find a few things wrong with your own work.
(edit: I made a complete new one only shorter. edited Johnny Dingus 1:23 p.m.)
(http://i26.photobucket.com/albums/c105/BlueViffer/DSCF1275.jpg)
Next is my first holster belt it is a generic one so I can just build more holsters and change them out on this belt. Going to do a brown one too.
(http://i26.photobucket.com/albums/c105/BlueViffer/DSCF1279.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/DSCF1280.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/DSCF1281.jpg)
Then here is the first holsters going on it they are my own version of Dodge City Holsters with a drop and made without anyones patterns. I did this from pics.
(http://i26.photobucket.com/albums/c105/BlueViffer/DSCF1283.jpg)
Well the wife and I are going to breakfast so will check back in later. Hope you guys like these.
vince
-
That shortened holster came out fine, Johnny. I can't see any flaws in the job. Looks like it was made that way. The belt is similar to the design I prefer for mine. It's much cleaner looking that the ranger style. Good work. The other holster is a good one, too. I like to see patterns that are slightly different and that's what you get when you make your own. You end up with a distinctive holster that is original yet representative of the style. Well done.
-
JD, :o Awesome work Pard, Real nice clean looking leather! Keep it up, hope we get this get toghter thing put toghter!
Keep up the Great work
ACE
-
Thanks Marshal...That holster is a complete remade same only shorter. I am going to give the longer one away to my brother in law for a Christmas present. He has a colt python 6 " barrel so it should fit it.
Ace, Thanks. Yes the get together sounds great. Hope it comes off as nice as it sounds it will.
vince
-
;) ;D Nice work Johnny Dingus
good job on all , I like your Dodge City variation , with the longer drop, this is really helpful for the pards carrying longer barreled sixguns, or pards with long arms, your rendition of the DC is very good, you kept the tooling simple, which gives it a nice clean look.
tEN wOLVES ;) :D ;D
-
Thanks TW at 6' 1" I need the pistol a little further down.
Here it is after I stiched around the star rivets.
(http://i26.photobucket.com/albums/c105/BlueViffer/DodgeCity002.jpg)
Eventualy I would like to shoot gunfighter and maybe gunfighter with black powder. These are cut down a little in front of the hammer and rolled to facilitate re holstering.
vince
-
Nice job! Is that a vinegaroon dye job or store bought?
-
Hello Johnny
Will John at 6' 1" tall you understand where i'm coming from , i'm 6' 4", unless I have a pretty good drop on my strong side, I might as well ask someone else to pull my gun, so for me it's a good 2 1/2 to 4" drop, or a nice 28 degree cross draw.
I see you have your gun pushed down in the holster , in it fits good , I think your rig will work out real well for you. One thing though, if you haven't used a edge bevelor, you need to bevel all your edges, use a #3 bevelor or a #2 is ok too, then you need to Burnish all your edges, seeing how you have dyed the leather dark, I would suggest you use Fiebings black or dark brown Edge Kote, after a coat or two of this , and after dry, then burnish the edges with a tine of deer antler or some blue jean material wraped around and glued to a piece of dowel, rub bees wax all over BJ dowel, and some on the edges, then rub and burbish until all the edges are smooth and shiny, this will seal the leather on the edges and give protection, plus it looks good , it will have that nice and finished look. ::) :o ;D 8) When I first started out, CowboyWC was on me to do a better job of burnishing my leather, I didn't understand what he ment at first , and it took me a while until I learned how to do it, and now he doesn't have to say anything about my burnishing , Thanks WC for the tips and the tricks and taking the time to show me. ;) :D it really puts the finishing touch to your leather. ::) :o 8)
Thanks for sharing Pard :D
tEN wOLVES ;) :D ;D
-
Santee,
Vinegaroon, I have some USMC black but havent used it yet. Was going to try a thimble full of the USMC with EVOO and see if I can get some shade of antique brown.
But now I know I can make some holsters so now to try mixing and matching other styles.
Eventually I would like to do a Roy Rodgers rig and a Lone Ranger rig also. Shooting in SASS we have to shoot 2 pistols so I don't want to do the rigs like Gunsmoke or Paladin.
But to do these kind of rigs I have to get a lot more patience and be able to carve.
vince
-
JD,
I know what you mean about patience, That is one thing the Lord didn't give me!! ??? Going to have to learn that on my own!!
I had a Super friend buy several books on carving, and it scares me to death to even try it on a piece of scrap! Before I got hurt, I didn't let anything get me down, if someone else could do it, so could I! But something happened to me after laying in this bed for 1 1/2years and I can't kick it!
I have said this before, If i won a great big Lottery, I would set up a great big meeting,m pay for everything, Pay Cowboywc, Will Gromley, Chuck Burrow's, TW,Outrider, all those great carver's for there time to so the rest of us some of there tricks!!
I have seen some purdy stuff done on here with just artistic stamping, but I also think that is something a person has to learn also.
Later
ACE
-
Heres my newest rig for my Remmys. Made the long pair to sell on Ebay, but ended up shooting them in competition, so am keeping them for now. Made the shorty for the 5 1/2" barreled Pietta.
The second is another Walker holster, using Will G's floral stamps. Made it to sell too, but seem to be collecting Walker holsters instead.
DM
-
I like 'em. Nice job, Dalton, very nice.
-
I'm looking forward to CSG so I can see some of that great leather in person, Dalton. I sure hope we end up on the same posse again.
-
Pit, it looks like 21 signed up, so may just be 1 posse. I will be sure to bring some goodies. DM
-
Dalton,
Those holsters look great! The color is real nice too. What did you use as a stain? I am looking to do some brown holsters next and would like it if they turned out half as nice as yours.
Johnny Dingus
-
Pit, it looks like 21 signed up, so may just be 1 posse.
That'd be good posses are a neccesary evil It always sucks when somebody I want to shoot with ends up on the other posse. :(
-
Nice, very nice, ;) ;D ::) :o 8)
tEN wOLVES ;) :D ;D
-
Dang Dalton,
You've been pretty busy the last couple a days. Real nice outcome to yer labors. I likee!!!
Thanks fer showing 'em off to us.
X Horse Pen
-
thats a realy nice set of holsters, nicely made too, Don
-
Well thanks for the kind words gents.
Horsepen, it just happens that I do several holsters at a time, that way when I am in the mood for stamping, I just stamp several, then dye several, etc. It makes me have several done at one time, which makes it look like I have been really busy. ;)
DM
-
Those all look great, Dalton. Those three all look like a great set. Nice stamp work. The color is good, too, just right for the amount of border. I really like the border around the floral stamps on the last one. It offsets them beautifully. Thanks for sharing.
-
Great looking holsters, Dalton. How are you doing your inside border lines? With a swivel knife and beveler?
-
The lines are swivel knife cut, then beveled. On occasion, I will do the far outside one with my stitch groover. DM
-
Dalton,
Those are AWESOME :o! Love the lines, just super clean and everything complements everything!
I , as allways walk to go over board!
Super work
ACE
-
Howdy Dalton & Johnny Dingus,
Beautiful work Pards! Many thanks for sharing this with us.
-
Here ya go Marshall,
Here's a couple a twins and a belt made for a pair of 1860 Colt Army's. These are sure enough Slim Jims. They are for 8" barrels. ;D
BTW, these are for a PO'd Rooster up in Iowa. A darned good gunsmith fer sure.
(http://i34.photobucket.com/albums/d133/lennowenoxie/P6300046.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P6300047.jpg)
Don't burn yer fangers today but have a great Independance Day!!!
X Horse Pen
-
Horse Pen
That is one good lookin' rig. Very clean stamp work.
WC
-
Dang am I happy I own those! ;D Now if I can just do the waiting part....
I blew the fake ivory grips off one of those armies today, gonna have to put another set of grips on them before I can fill those holsters!
-
::) :o 8) Horse Pen
Nice work pard , your stamping is perfect, your friend is really going to be proud to wear this. :D
tEN wOLVES ;) :D ;D
-
Howdy Horse Pen,
Another beautiful rig from your workshop! Great job of stamping!
Many thanks for sharing this with us.
-
:o Blew the grips off? What kinda loads ya puttin' in those .44's? LOL!!! :D
Watch yer knoggin'! The Pony Express will be throwin' a box yer way.
Thanks for the warm reception of the twins, fellas, and wear 'em in good health Roosterman!
Many thanks,
X Horse Pen
-
Hey , I'm already a dashingly handsome old cowboy, but these holsters ought to put me over the top. I imagine there's going to be alot of problems with all the cowgirls flocking around me while I'm trying to do some serious shootin' with this new rig on. ;D Maybe I'l look so good nobody will notice I'm dead ass last......As I've always said, It's not how good you shoot, it's how good you look while you're doing it! ;)
Thanks for your fine work Pard, I'm allready cooking up a set in my mind for my navy conversions....
-
HP, I think WC hit it on the head :o :o Them are Good Lookin!!! :) Is that a 2 1/2" belt? that is where I am stuck at right now, I have a pair of S.J. I am doing a no bullet loop style belt, I went with a real simple stamp design on the holters, so I think to keep the look that if I use a 2 1/2" belt it will look pretty simple with that border>
I get it figure out maybe?
HP, thanks for sharing the pic's of that NICE RIG!
ACE
-
Ace, that's a 2 1/4" belt and tapers to 1 1/2" on each end. These percussion belts give ya more room to stamp and make designs. I'm working on a cartridge belt now and the loops do limit ya some. Good luck on yer Slim Jim rig. ;)
X Horse Pen
-
HP,
How important is it that the belt design matches the holsters :o i am strickly making this rig to test the waters.
I running pretty close on funds, and i need to buy some good leather, but i don't want to have a loy tied up if my work wont sell?
I know that i am just stating out, and I don't expect to get HIGH Dollor out of my rig's but i don't want to loose money!
I would be great full for a answer wheter our not the belt needs to match the holsters?
This is not a question just for HP, anyone that want's to jump ingo for it!!
I will be very great full for any and all advice!1
Thanks
ACE
-
Man sure can basket weave!!!!
-
Ace, my philosophy or premise is look at as many old west leather articles as ya can and not just what's in books. Get a feel for what the old timers did and then use yer own engenuity and be creative with what ya have by way of tools. Those old timers were individualists and had there own whimsies and opinions just like we all do today. If a customer had a vision of what he wanted then I suppose the leathersmith made it for him as desired by the customer. "The customer is always right" is not a modern addage, I don't think. Maybe Horace Greeley came up with that one too. ;D
The problems that I have seen as a re-enactor of various time periods is that they tend to all want a copy of the same 10 gorgets or knife cases or etc... The effect is that they all look like uniformed soldiers whether they are portraying soldiers or not. Common is not good in my opinion. It leads to a uniformed or cast from the same mold interpretation of history.
My advice is to be creative and keep making what stands out to you. Some folks don't like busy looking pieces and some do. Some prefer plain. I like 'em all and enjoy doin' it all. If yer making a holster that is border stamped then I would recommend border stamping the belt too. These are just my opinions however and I am sure everybody here has their own philosophy they will share with you.
Yer doing nice work, Ace. Just keep up the practice as we all are here. Ya can't help but get betterer and betterer as ya go along.
Cheers,
X Horse Pen
My apologies for the long post. I usually don't write briefs or thesis papers. :-[
-
HP,
No need for apologies I injoy having someone to chat with about my interest!!! Thanks for the idea's , I have a lot of learning (YEARS) but you all have been great help, and i depend on you pards a lot (to much)!! :o ???
With out you Pards, I would still be in bed everyday, speaking of that, it's not looking good for the back and right leg, they had given me a couple of years before I would need a wheel chair, i think they missed it by about 22 months :o :o :o
I have a tens unit, that i where on that leg to get it to stop hurting so that I can go to sleep, I wore it all day yesterday set pretty high, burnt both spots whee the pads were.
Thanks for the help, hope we can get together someday!
ACE
-
Great work, X-Pen. I really like the way the pattern folllows the same alignment on every piece. It really makes a beautiful rig. 8)
-
HP,
How important is it that the belt design matches the holsters :o i am strickly making this rig to test the waters.
I running pretty close on funds, and i need to buy some good leather, but i don't want to have a loy tied up if my work wont sell?
I know that i am just stating out, and I don't expect to get HIGH Dollor out of my rig's but i don't want to loose money!
I would be great full for a answer wheter our not the belt needs to match the holsters?
This is not a question just for HP, anyone that want's to jump ingo for it!!
I will be very great full for any and all advice!1
Thanks
ACE
Howdy Pal
A matching rig looks good but it doesn't have to. Remember back in the old west cowboys got their stuff
anywhere they could. If a holster got ruined they got another one, it most likely didn't match.
WC
-
Thanks WC, I used a very small border on the holsters, trying to give them the look of period correct look that was a touch above plain but nothing over the top! But then when I got to thinking about the belt, and I am going to give it the same border, but want to give it a tad bit more, but i still don't know, I quess it will have to hit me in head, and then i will do it! I think it is that i have to many things i neeed to get done, and as allways, if i had nothing to do I wouldn't be hurting so bad! I told my Bud in S.C. that I felt like cutting my right leg off!It hurt so bad yesterday, i wore my tenns unit on that leg all day, and burnt a couple good spots where the pads were on! never fails!Sorry about that, it just makes it hard to consintrate with other things going on! i think CW, you are 100 percent right :) :)
thanks Guys :) You Pards are allways there when I need it!! I got a hold of SASS about asking to use there place that Chuck recommended, but they don't like me, so they never got back to me, like they said they would!!
But I still want to put toghter a meeting of anyone who wants to come talk leather and what ever, next year!!!
I want to meet you guys!!!! When you got 50 mentors, it would be nice to shake there hand!!
Thanks to all!
ACE
-
Howdy boys,
Here's a cartridge belt that I just finished up for 44-40 hulls.
(http://i34.photobucket.com/albums/d133/lennowenoxie/P7070049.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P7070050.jpg)
I got the idea for the scalloped border with a seed inside each one from the Peacemakers book.
Cheers,
X Horse Pen
-
I had some bullet loop material left over so I made m'self a hatband with it.
(http://i34.photobucket.com/albums/d133/lennowenoxie/P7070051.jpg)
This is my old timey bonnet I wear ta shoots.
X Horse Pen
-
:D Howdy Horse Pen Henry
Pard you're really putting out some nice work, I like your use of the seeder, and your choice of border stamps , the hat band is a nice touch too, nice work all around Pard, I look forward to seeing your next project. :D ;D
tEN wOLVES ;) :D ;D
-
Thanks TW, I'm starting the holsters for it now. They'll be for a pair of SAA Colt's in 44-40 with 7 1/2" barrels straight hang. This belt is a turn a the century belt and is real simple in cut. I intend to make the holsters in a carved floral design but the same color. I usually don't dye the leather on my projects but did something different this time.
Many thanks,
X Horse Pen
-
Howdy Horse Pen,
Gorgeous work! Another great job of stamping. In addition to being a beautiful piece, this belt looks very rugged and durable. It will stand the test of time. Look forward to seeing the holsters.
Many thanks for sharing this with us.
-
Thanks Johnny. I'll show 'em to ya when I get 'em done. One a the main reasons I like to show my work to you fellas is not only for the praise for good work which encourages one to keep it up, but the off chance that one or two a you fellas will tell me where I have screwed up and help me get better. I am serious about this. If ya have a positive critique that will help me get better then fire away. I have big shoulders and I sure will not get my feelings hurt about it. I am asking you guys for it so cough it up and spill the beans will ya??? ;) :D ;D I know someonme out there has some helpful hints to share so we can all learn to be better craftsmen from it.
Many thanks fer respectful honesty, and my hat's off ta y'all good pals n' pards,
X Horse Pen
-
More good work, X-Pen. That border design is really good. The spacing is even and out far enough so the buckle holes don't cut into it at all. I like the clip corner tip on the billet, too. I know you welcome criticism but it's hard to criticize good work. I mean, OK, one of those seed spots was off .003 to the left. That's what gives it the truly hand-made look. You may want to put a sample of that on the border thread for future reference. I really like the look. Nice hat band, too. The double stitch line down it makes it interesting. Thanks for sharing.
-
Alright, criticism time. Jeez you is always so doggone cheerful!!! ;D
But really, great work there Horsepen! I like it alot. I like the subtleness of the hat band. Really elegant without being over the top.
DM
-
Awesome! I like the hatband too.
-
Dedgummit fellas!!! I surely didn't think ya was gonna be that stinkin' tuff on me or I wouldn't have invited the critiques. :-*
Thanks for the kind words though. I guess the bottom line is we are all our own harshest critics. There are some things I will do differently on my next belt. One thing is I'll move that seeder over another .003"!!! ;D
Watchyerhair,
X Horse Pen
-
I guess the bottom line is we are all our own harshest critics.
That's for sure. I have a holster I just stamped and it's getting tossed. My wife can't see anything wrong with it and in my opinion, there are 3 or 4 glaring flaws in it.
Maybe I'll finish it and give it to the kid next door for his capgun.
-
Howdy Horse Pen
The only thing I don't care for the look of is the white thread for the billets and dark for the rest.
WC
-
;) I dont think the dark is thread. I think it is just overstitched for decoration. Hard to tell tho. DM
-
I understand that, It still doesn't look good using white (real) stitches with the dark (phony) stitches.
WC
-
Point well taken, WC. That's the kind a stuff I am lookin' for. Sometimes a feller can't see that stuff in his own work.
Do ya have any suggestions on how to color beeswaxed linen thread once it is on a piece? Spit and dirt? I dunno! :-\
Dalton yer right. It is overstitch wheel in grooves. I do that quite a bit. Not always but quite a bit.
Many thanks,
X Horse Pen
-
Maybe I'll finish it and give it to the kid next door for his capgun.
Funny you mention cap guns, Marshal. I had some 8-9 oz grade A scrap lying around; you know, the kind of stuff that's too small to make a full-size lined belt or holster with, but too big to give to the boy scouts for their merit badges; and I was really slow, and the Makers' Mark bourbon was flowing pretty freely, so I made a cap gun rig for my sisters grandson. I call it the "Buckaroo Buscadero". Here's some pics. Remember, I admitted the cow perch was flowing......
-
More "Buckaroo Buscadero" pics.
-
I betchya I know who yer sister's grandson's hero is........That'll get his attention I am sure. I wish I'd a had a great uncle like you when I was a sprout. :o
-
Fine rig, Kid. I wasn't going to go that far but it's always an idea to keep in mind. Thanks for the pics. ;)
-
Thanks for the comments guys! I had to order a buckle for it so it isn't done yet. It was fun! Brought back some memories. especially the smell of the caps. Had to try them out. Quality control you know.
Speaking of comments, Horsepen, I like the white thread on your belt. I reckon that leathersmithing is an art, and one of the fundamentals of art, in my opinion, is contrast. And thats what you've got with the stitching on that belt. You always do great work.
Like I said, Marshal W., I may have been a little woozy from drink, so the 3 or 4 little things your wife didn't see on yours tranferred to mine with a bunch thrown in. But I'll tell you this, my seeder wasn't .003 off. Of the two of them I saw while I was using them, one of them was right on. LOL
-
He is sure to take that to bed with him when he gets it! Grinning from ear to ear!! Great work. ;D
-
Howdy Kid
Those are great......
WC
-
KS, Thats AWesome :o Thanks so much for sharing
ACE
-
OK, this might not be the right topic to put this under but here goes. I have been working on a carving pattern and would like to have some of that critique stuff you guys are always talking about.
Design elements, shading, and tool work could be left to anyones imagination.
Would it work ??? Or do I need to go back to the drawing board.
Oh, if you by some strange chance like it feel free to use it and modify it any old how, just show it to me when you are done.
-
Gunbutcher, you should change your name to patternmaker! I like that. You need to do the wraparound part to the back although that shouldnt be too tough to hammer out on the fly. I like the flowing lines around the entire holster. Looks very elegant.
That is something I have a hard time doing. I cant draw patterns for nothing. Very nice. DM
-
Outstanding pattern, gunbutcher. You really have a good one, there. Thanks for sharing.
-
Thank you both for the kind words. Now I just need to lay it down on some leather and see if the old skills are still there. hope it's like riding a bicycle ;D
-
GB,
AWESOME looking design :o I am going to copy it, although i can't carve ??? ??? Maybe someday I will learn! I have been invited over to one of the Pards hear that carves, but it never seems to work out so I can get there! With the gas prices I don't know how anyone goes anywhere >:( >:( >:( It seems like no matter where you go, it cost $50.00 to drive there and back!
Thanks so much for sharing :)
ACE
-
Well guys, here is another holster from the newest beginer here. After using my Dodge city renditions last weekend at my local shoot a pard said he had trouble with his holsters so I decided to build a new one for him and if he likes it I'll build another. He is tall but has a stick body so he needs his belt up high and his pistols lower. I put in a 3 " drop on this holster I hope it fits him.
Next I need to get some walnut shells and cook some brown stain up. But for now here is my brown.
Johnny Dingus
(http://i26.photobucket.com/albums/c105/BlueViffer/MexicanLoop003.jpg)
And one with out the gun.
(http://i26.photobucket.com/albums/c105/BlueViffer/MexicanLoop005.jpg)
-
Nothing wrong with that color Johnny. It gives it a old used look with the wrinkles and all. I betchya he'll like it fine. Keep on a keepin' on and don't quit, ya hear? ;)
X Horse Pen
-
Howdy Johnny Dingus
your holster looks good , like HP said the color is fine, looks real antique, and the burnished edges give it a nice finished look, you're doing real well in your holster making pard , keep up the good work, and keep them coming. ;) ;D 8)
tEN wOLVES ;) :D ;D
-
Thanks HP and tEN W. I think it would have less wrinkles if I cut the slots a little bigger. I might even make a set for me. It's fun making these holsters and trying them out. And I even like the single weight at 9-10oz.
Johnny Dingus
-
Howdy Johnny D,
Thats a great job. I'm sure your friend will be proud to wear it. I like the color and design. It has a nice antique look.
Look forward to seeing your next projects.
-
Hey, JD, that looks good. I like the color. I've worked hard to achieve the same look. If you make looser slots, be sure to bulge the holster slightly between them so it doesn't pull up out of them when you draw the pistol. alternately, you could put tie-downs on them. I wear crossed belts and tie-downs are a must so I don't cause a belt to drop when I draw. Nothing worse than wearing your rig around your ankles. ;D
-
I like it, too!! :D That is a color of brown I have been trying to get (without all the red in it).
-
:) JD,
Great job Pard!! Looks like a quick draw holster and I also like the color!! Great job keep it up! Us rookies can't give up I have several in the works, just waiting on the dye to get to the right color!
Thanks for sharing
ACE
-
Thanks for the kind words fellas. I think I am going to be my worst critic.
But do have a question for you that are a whole lot more knowlageable. Any way spelling is wrong but to those of you with more experience this question is for you.
I started with what was 9 -10 oz leather kept it single ply and now it looks more like 6-7 oz after I am finished. Now I used some elmers white glue mixed with my water when wet moulding so it is stiff and holds its shape, but does the finished size shrink after working and casing and moulding?
It is light also.
Johnny Dingus
-
Howdy Johnny
only use water when wet molding your holster, after you have it the way you want it take your gun out after a few minutes, and either hang it or place it where it won't be disturbed, let it dry thoroughly, and it will be as stif as you could want it , then you can condition with Lexol and finish it the way you want ( oil or Tan Kote or what what ever you like )...
tEN wOLVES ;) :D ;D
-
these are all boxed up and ready to go.......
A early 1870's narrow (1.5") cartridge belt - the buckle is an original from that period.......
(http://www.wrtcleather.com/1-ckd/1-2008/gunbelt-peck-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/gunbelt-peck-2.jpg)
A circa 1860's beaded sheath...
(http://www.wrtcleather.com/1-ckd/1-2008/sheath-peck-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/sheath-peck-2.jpg)
-
does the finished size shrink after working and casing and moulding
It does to a degree dependent on how "fluffy/dense" the original leather was - the dyes, etc. will dry it up some what - this is not necessarily a bad thing - most 1800's leather is generally thinner than what we consider proper to use today.....
-
:o
Nice work Chuck!! I Love that beading! I'd like to learn how to do that. Any books you can recommend?
-
CB,
As allways one word AWESOME :) Love that color, I am working on it, I have 2 batches done, and getting ready to start the #3, realy should be #4, but a bud from Florida wanted some concenterate so I boilded down the #3 batch to a 1/2 pint, I have used those nuts and hulls 3 times, I am going to scrap off the hulls masked them to death in the hose and the squezze ing's I am going to mix with the 1/2 pint, and then I am going to run that threw a paint strainer and put a little alcohol and shipped it to him, that should give him enough to make a nice batch!
CB, if you think that is wrong please let me know what you would do diff,
Thanks
ACE
-
Well, while my wife was away on a trip to see her Grandpa in Cody, Wy, I decided to make her a new set of holsters for her opentops. It was my first attempt at carving a full pattern on a set of holsters, and I feel pretty proud of these here critters. I wanted to put on a nice vintage style concho, but dont have any that suited my taste, so went with some old vintage spots I have.
Looking at it a little later, its almost a shame to have put the round loops on it as they cover up the carving too much. Oh well, next time.
DM
-
Heres a few more shots.
-
Howdy Dalton ;D ;D
Will I new as soon as you gave leather carving a try that you would ACE IT, and you have, your holsters are beautiful pard , for a first time out carving , WOW, you did well , everything looks professional , the color , the finish, and all the nice burnished edges, I like your choice of border stampings it really adds the special touch, so what's for next week, if I ever get this shoulder fixed up I'm going to have a lot of catching up to do. ??? :o 8)
tEN wOLVES
-
Dalton, I like what ya did with the mule foot stamps. The carving is super.
Chuck, thanks for showing some more of your work. I see what you were trying to tell me about that beadwork design on the knife sheath. Beautiful stuff.
X Horse Pen
-
Great work again, pards.
Chuck, that narrow belt is definitely my style. Outstanding look. That beadwork is really fine, too.
Dalton, you keep cranking out these cool rigs. Nice tooling. The spots are a good accent, as well.
-
Chuck i love the whirling log design on the sheath, and Dalton great carving you did say first time... , Don
-
Howdy DM
Very nice job. Great for a first time.
WC
-
Howdy Dalton,
My compliments to you on another great job! Its hard to believe this is your first time carving. The carving on these holsters is gorgeous.
-
Well, not first time carving, but first time covering a whole rig. I have carved little corner bits here and there just for accent.
Thanks for the compliments gents. DM
-
Man, you fellas put out some truly inspirational pieces. Thanks!!
-
:o :o :o DM'
AWESOME AWESOME AWESOME, killer job :o All I can say is that you have been holding back on me, or you have flat TURNED UP THE HEAT!! Now that gets my heart pumping, and makes me want to get out and hit it, but my back don't think so!!
I LOVE UM!!
ACE
-
Made this last week as I was sick at home and needed a crossdraw for Sunday's shoot.
I haven't posted anything before, but I liked the picture and got some very nice feedback from some fellow shooters.
Regards.
C79
-
That looks good, Custom79. The basket weave looks good on it. Nice balanced look. Very nice work. Welcome to the forum, pard. Looking forward to seeing more of your stuff.
-
;D Howdy custom79
Will I think you need to be posting more of your work, your rig is beautiful pard, I like the weave and the border , and the color and design , you did well, thanks for sharing , and feel free to show more , we're happy to have you in the forum... ;) :D
tEN wOLVES ;) :D ;D
-
C79,
AWESOME, I have to agree with MW & TW, not much else I could add, other than I wished I was that good, I am working that away ??? ::).
Thanks for sharing, and like TW said "Show us More!" :) :)
ACE
-
Nice stuff Custom79. I'm with the others...post some more!
-
C79,
Nice work, the newest memeber here and expert craftmanship. Show us more! Keep up the good work.
Johnny Dingus
-
Nice pieces all: Chuck, Dalton and C79.
This forum is a great place for sharing, showing and learning. We are fortunate to have it.
-
Howdy Custom79,
Beautiful work! Welcome to the forum. We look forward to seeing your future projects.
Many thanks for sharing this with us.
-
Hey Iain,
Good to see your work here at the forum, eh.
I'm goin' to post the second of two Johnny Ringo Rigs I've made. This second one is for a movie prop collector/re-creator who was really into the details. The movie rig had been shortened to fit the actor. They moved the billet back, took off two bullet loops, popped off two spots, and sewed the billet back on with a differnt stitching pattern, leaving stitching holes, and the marks where the spots had been. The billet was sewn on a little too high, and the movie guy wanted me to re-create these details.
Will
-
;) :D ;D ;D :o ::) Now thats the real deal, nice work Will. 8)
tEN wOLVES ;) :D ;D
-
:)WG,
One word AWESOME!!! :o Of course, everything that you do is top notch!!! I got 3 sets of your patterns and plan to get more, but i could have 10,000 patterns and that won not make me better, practice and improve, practice and improve, I think that is what it is going to take for me, to get better!1
Thats for sharing that great looking rig for all of us to see!
Thanks
ACE
-
Hey Will,
I've peeked in here forever as well. It is always nice to see what the pards here put together to show. Lots of wonderful work.
I figured it was time I put one of mine out of folks to see.
I think it deserves to be noted that I get a lot of my ideas from playing around with variations on the many patterns of yours that I have. It should also be said that this cowboy appreciates it that you always have a moment to answer a question or offer some advice when I ask.
Regards.
C79
Hey Iain,
Good to see your work here at the forum, eh.
I'm goin' to post the second of two Johnny Ringo Rigs I've made. This second one is for a movie prop collector/re-creator who was really into the details. The movie rig had been shortened to fit the actor. They moved the billet back, took off two bullet loops, popped off two spots, and sewed the billet back on with a differnt stitching pattern, leaving stitching holes, and the marks where the spots had been. The billet was sewn on a little too high, and the movie guy wanted me to re-create these details.
Will
-
Thanks to all for the kind words. Coming from this talented bunch, it is high praise indeed.
I'll do my best to keep a piece coming now and then. My bench is a little crowded with projects that I have promised to a few good folks here in Winnipeg.
Doing things by hand is rewarding, but time intensive.
C79
-
The movie rig had been shortened to fit the actor. They moved the billet back, took off two bullet loops, popped off two spots, and sewed the billet back on with a differnt stitching pattern, leaving stitching holes, and the marks where the spots had been. The billet was sewn on a little too high, and the movie guy wanted me to re-create these details.
I can understand wanting that kind of authenticity. It appeals to my quirky side. ;) It's as close as you can get to having the real one used.
-
Ain't we a productive bunch? Will, do you make yer own silverwork? That's a real nice piece a work.
Here is the holster with the belt I showed earlier. I made up this tooling pattern myself. This is the first time I put spots on cowboy stuff. I started out with the antiqued brass and buffed them back with white scotch-brite pads. I also knocked off the bright white of the stitching with some brown dye and a tiny brush. Here goes it:
(http://i34.photobucket.com/albums/d133/lennowenoxie/P7140063.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P7140062.jpg)
I think this is gonna be my 2gun NCOWS working cowboy rig. One pistol and one rifle. :D
Have a party,
X Horse Pen
-
::) :o :D ;D 8) Beautiful Horse Pen, what a piece of work, I like everything about it, you're a real talent.
Regards
tEN wOLVES ;) :D ;D
-
HP, :o :o :o
WHOLY COW Pard, That's SMOKIN 8)There isn't much I can say except AWESOME ;D Everything flows so nice, the arragement of the spots are perfect, and most of the time I don't like the big round skirt, but on that rig, I love it!!! Because it flows so good, hate to ask this, did you see one close to that in P.I. our did thst just come straitout of the old brain?
If I could carve, that rig would of taken me a week at least to do, no a Month to do!!
Great JOB :) :) :)
ACE
-
Beautiful work Horsepen,
You do a great job carving and backgrounding. I also like how perfect your lines are do you use a grover or a pair of calipers?
I am going to have to get a pair of long guns cause the sure have great looking holsters.
Johnny Dingus
-
Looks good, X-Pen. That half-skirt righ should fit the working cowboy persona nicely. The simple double-groove border is a nice touch, it sets off that tooling beautifully. Impressive.
Hey Will, I took another look at your latest Johnny Ringo rig. How did you get the spot holes and such on it? Did you actually complete the rig then shorten it or just punch the holes to make it look like it was shortened? I really like what you did, there.
-
Thanks fellas. I am glad you've enjoyed it.
I don't Have "Packin' Iron" yet, but I am gonna. I ordered it about 3 days ago on Amazon and got another couple a books while I was at it. All cowboy books except 2. I got a couple a cowgirl books comin' as well. They said there's a lot a pictures of cowgirls in 'em. :D
The holster and rig on the cover of Packin' Iron is attractive to me, though. I was checkin' out the color of that rig.
Johnny, I use a stitch groover for the lines on my borders most usually. I have a creaser that I use sometimes too. A friend of mine uses a Kerr's jar lid to good effect.
Cheers,
X Horse Pen
-
Very nice X-Pen. Mi gusto mucho.
Whereabouts do you shoot NCOWS?
-
Wow! Wish I were Modern Day Cowboy about now.
Those are sweeeeeet
-
Irish Dave,
I just signed on with a good bunch of Vigilantes down around Garnett, Kansas. They ain't half bad. They put up with me and my dry sense a humor. This rig is a turn a the century rig for Texas on up into Kansas as near as I can tell. I doubt it's representative of modern holsters for modern cowboys a'tall. Our posse is represented by fellas from 1865 up through 1899 or so.
Get yer flour sacks on and come join us. ;D
X Horse Pen
-
Hey HorsePen,
Great lookin' holster. Another trick you can use to take the shine off your stitchin' is to hit it will a brown colored pencil, the kind ya' pick-up at an art store. Works great: don't have ta' worry about gettin' it on anything, no dryin' time, and it's fast. Plus, it looks like the high spots of the stitchin' just got dirty, you can still see the whites of the stitches.
Hey Marshal,
No, I didn't build the belt and then shorten it, too much work. When I layed out the cartridge loops, I just punched the top holes of the two extra loops. For the spots, I put 'em in place and then flipped the belt over and tapped between the prongs with a big seeder tool to set the spots into the leather. Then I just pulled the spot out and used it on the next space. As for attachin' the billet off-center of the belt, that was a hard one for my obsessive/compulsive brain to get around, but I managed, for the sake of the customer.
So many folks have remarked about the rig, I'm thinkin' about makin' a pattern for it. I need to figure out how to make the conchos more affordable, but I'll work on it.
I posted a page on my website with a larger, newer photo, (didn't use my "Hand of God" pistol this time). It looks better and you can get a better look at the details.
http://www.willghormley-maker.com/JohnnyRingoHolsterRig.html
Will
P.S. Oh, HorsePen, I forgot: I made the conchos to look like the originals, which were stamped silver, (the best I could tell from photos). I made masters so they could be cast in a variety of metals, but I flattened and distorted the masters the same as happens when you stamp silver. So, they look pretty good, unless you get your nose up on 'em.
-
Thanks for the tip on the colored pencils, Will. I use Prisma-Color pencils by Berol for drawing. They are a beeswax base pencil and I can see where those would wok just perfectly for this perticular job. Also,...i wondered about yer silver. I do silverwork too. Yer doing great things. Keep it up!
My hats off to ye,
X Horse Pen
-
Thanks for the info, Will. I was wondering about that. The colored pencil tip is a good one. Next time I want to subdue the stitches but still leave them white, I'll try it. Actually, I'll probably try it on the holster I'm throwing together to try new stuff.
-
Howdy Horse Pen,
Simply outstanding work and design! You will be pleased to see how much your work resembles what is on the pages of "Packing Iron".
Howdy Will G,
Your Johnny Ringo rig is beautiful! I'm sure you are very proud to see your work used in one of the best westerns ever made.
Many thanks for sharing this with us.
-
Horsepen, thanks for putting those closeup shots of that awesome rig in so we can see the detail. I think that helps us amateurs a bunch! Love that flower.
Will G, you've got a great color on that rig (and the others on your photos page). It looks used, but not too antique. Perfect for the Ringo rig.
Do you mind me asking if that a spirit, oil or a walnut dye?
-
Hey Santee,
It's one of the simplest thing I do to color leather. I take Fiebing's Professional Oil Dye, Black, and mix it 50/50 with extra virgin olive oil. It goes on kinda spotchy, and you have to put it on with a rag in the other hand to wipe it up and smooth it out, but it comes out nice, and it is easy to make and easy to use. I like the looks of it and it's simple. I like that.
Will
-
Ahhhhh! I see. Thanks for the tip.
-
Howdy Horse Pen,
Simply outstanding work and design! You will be pleased to see how much your work resembles what is on the pages of "Packing Iron".
Howdy Will G,
Your Johnny Ringo rig is beautiful! I'm sure you are very proud to see your work used in one of the best westerns ever made.
Many thanks for sharing this with us.
JM, You are right on every word you stated in your post, HP. & WG. are flat showing there stuff :) and I love it :) :)
and the movie, AWESOME, AWESOME, AWESOME, my favorite to!
ACE
-
:)Great work Horsepen! I told you your work was always good! Nice carving!
:)Will, I knew there was a reason I bought some of your patterns! I hope you'll offer a pattern of the Ringo rig.
:)Ace, I like that black holster you made for your friend! Lookin' good! Great dye job!
Here's my latest, a single gun rig. And since I made a cap gun rig for my grand nephew, I had to make something for his sister. I kept tellin' myself it was a little possibles bag, but when it comes right down to it, It's a kids purse.
-
:D OOPS! Forgot the pics! Can't blame it on the bourbon, too early in the day. Must be age! ;D
-
Howdy Kid
Nice work pard, I really like your holster , it has just the right touch of stamping/tooling, it looks real classy, and the color is nice too , is this holster lined , it kinda looks like it from the picture, you're sure too get some looks when wearing this one.
Your Neice is sure to like the purse you made for her , i'm not a purse man but this looks good, again your carving and stamping are right on, well done pard. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Howdy Kid
That's good lookin work. They'll be happy with those.
By the way, it's never too early for Bourbon......... ;D
WC
-
Good rig, Kid. Good, clean lines and good execution. I like the matching hatband, too. The purse is really nice. She should be tickled with that. What a fine gift.
-
:)Howdy Kid,
AWESOME work, love the rig and the color, it is a little to glossy for me, BUT it is your rig and not evryone will like certain things, but the style and the color, JUST SMOKIN :) :) The purse mind blowing for me, I am 10 years away from reaching out to making something like that!
I am very great full that you have shared them with us! That is how I get a lot of idea's!
ACE
-
That rig finished up real nice, Kid. I like the huntin' bag too. She can always use that for her C&B revolver reloading equipment. ;D
If ya don't mind me askin'....how did ya arrive at that finish and color on the rig and hatband? Inquiring minds gotta know!!!
Many thanks,
X Horse Pen
-
Howdy Kid,
Beautiful work! Many thanks for sharing this with us. Look forward to seeing your future projects.
-
Thanks for the kind words guys!
yeah, ten wolves, its' lined with 4/5 oz cowhide that had been tanned almost white. when I put the finish to it it came out a little lighter than the outside, and gave the holster a two-tone look. I kinda liked it.
Horsepen, I hesitate to tell you about the finish on accounta it's so easy. It's fiebings paste antique leather stain in British Tan, two coats, and topped with fiebings resolene. The stain isn't entirely waterproof but the resolene seals it.
The only problem I had with this one was when I dipped it in water for about 30 seconds and put the pistol in a plastic bag to seat it in the holster the stamping stretched out and is not as crisp as it was before. I've had this problem with import leather but never with grade A stuff, and this was a nice choice piece. Any ideas?
-
To wet mold holsters, I seldom dip them for more than about 5 seconds. They're malleable for a good 5 minutes before they start to stiffen up again and the design never raises back up. Of course, if the leather is going to stretch where the design is, it will take its toll some no matter what the degree of wetness.
-
Some mighty fine work going on here! Congrats to all....
I just finished this one today - no income for almost a month is a big incentive to get things done! (still hobbling but finally motivating) ;)
These cap and ball frontiersman/plainsman style rigs are my favorites - I get to do a little bit of everything........
(http://www.wrtcleather.com/1-ckd/1-2008/gunrig-johnsond-001.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/gunrig-johnsond-002.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/gunrig-johnsond-003.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/gunrig-johnsond-004.jpg)
for those who've expressed interest in beadwork keep a weather eye out - as soon as I get a breather I'll make a post with some info..........
-
Holy Shamoley, Chuck. I think you outdid yourself again. I love that possibles bag. The beadwork is really outstanding and the way it's held onto the belt is nice. What are those buttons made of? They really look nice. I like the way you put the fringe on the holster, too. It helps tie it all together. Thanks for sharing.
-
:D OOPS! Forgot the pics! Can't blame it on the bourbon, too early in the day.
When exactly is "Too early in the day"? :)
-
When exactly is "Too early in the day"? :)
Anytime before ten AM, I've only had two or three by then and that's not near enuff! ;D
NICE work Chuck! I agree with marshal W on the everything he said. That's downright pure artwork! :o
-
Glad ya'll enjoyed the look see and thanks for the compliments - always a nice way to start the day.... ;D
The buttons are slab cut antler (eitehr elk or red deer) - instead of cutting across the antler and exposing the core these are length wise slices of only the outer bark - I then shape to size, drill and chamfer the holes, and then soak them in leather dye (these were dyed in Fiebings Russet). Once dry I buff back to the color/look I want.
-
:D ;D ;D Beautiful Stuff Chuck, thanks for letting us have a looky loo, it sounds like you're feeling better, thats good news. :D ;D
tEN wOLVES ;) :D ;D
-
:o :o :o :o :o
:) CB, you allways do outstanding work, and that is why you can make a living doing it!! I am glad to see that you are healing, even though it is slow at least you are getting around some!!
That is the closest to being period correct (that I have seen) I realy like the way you over layed the top part of the holster with a peice of flesh side side out! It shows as if a mountain man made his rig to go out in world, but shows the craftmanship that you allways give! :)
A pure peice of a ART you have there, Thank you so much for sharing that with us!
ACE
-
The buttons are slab cut antler (eitehr elk or red deer) - instead of cutting across the antler and exposing the core these are length wise slices of only the outer bark - I then shape to size, drill and chamfer the holes, and then soak them in leather dye (these were dyed in Fiebings Russet). Once dry I buff back to the color/look I want.
Thanks, pard. I was wondering. They are a nice look.
-
I realy like the way you over layed the top part of the holster with a peice of flesh side side out!
Ace that's braintan buckskin which doesn't have a smooth grain side - it's removed during the processing. To learn more about braintan check out www.braintan.com...
A good (and less expensive substitute) is chamois aka German tan aka imitation braintan - it's available from Fox Valley Leather or Crazy Crow.....
-
:) Thanks Chuck, I have a friend that says he is going to brain tan a lot of deer hides this season, his cousin owns the local locker plant, so he gets all the free deer hides he wants. He has been going up everytime they kill hogs and getting the brains and doing what ever you do. I sure love the orginality of that last outfit you posted! I hate to ask this and if you do not want to answer i work be upset any, because this is home you make your living!!! Did you line the holster with that buckskin, or just a top overlay?
Thanks for the reply!! :)
Ace
-
Chuck, I always enjoy looking at your work. Its like going to an Art Gallery in a Western Museum.
We appreciate your sharing this with us.
-
Just finished this hunting bag for a friend of mine, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/IMG_1004.jpg)
-
Nice work, Don. I like the way you cut the design into the top grain. The color works well with the rough grain. It looks like a good bag. Your friend should be tickled with that. 8)
-
Howdy Pards,
In the past few months a few of the local CAS clubs have been toying with the idea of having a "Wild Bunch" side match at the monthly shoots. If any of you are not familiar with the movie "The Wild Bunch" the time setting was a little past the trun of the 20th century, and 1911 45 automatics and Browning machine guns were used along with 97 Winchester shotguns. Last month they did a side match and seeing 45 automatics hanging out of holsters made for revolvers was kind of weird looking and IMHO was not the safest thing to do. So....here is my rendition of a Wild Bunch 45 holster, which is cut for the gun. Mind you this is the first prototype and most probably go through some changesl
-
:o Outrider, No matter what you make it is allways AWESOME :o :)
I wished you hadn't shown that, know I want to make me one for my 45's!!! That holster is Beatifull, your lines are allways on the money you allways put the little extra effort and extras look to top a holster off, that is just sweet!!!
I do thank you for sharing, just wished you would of waited a couple months :) ;D I got to many Irons in the fire right know! But I did down load the Pic ;D
Don101, Very nice looking hunting bag, very well designed and styled, I hate to ask this, but does that have a Rose color to it?
I have a project coming up later on this fall and that color might combo with what I am doing, what did you use for dye if you don't mind me asking? It is totaly okay if you perfer not to tell, i will understand!
Keep it coming guys!!!! That is what keeps the jueices flowing for me!!
Thanks
ACE
-
How about this it is a PC Holster Made by myself, originaly made by Frazier, model number 9 as by there catalog, Don
-
Ace its fibings dark brown and mixed with saddle oil, just a tea spoon and dilute till you get the color required, Don
-
Ace, thanks for the compliments....
Don 101...I have studied that design (Page 139 Packin Iron) for some time. Although I like the basic design what I don't care for is the very deep recurve by the trigger. I have seen several accidental discharges from automatics because of that feature on holsters. Other than the deep recurve that is a very nice design. Of course the one pictured in Packin Iron has a little too much silver on it...makes it look "gawdy" MHO
The hunting bag is absolutely beautiful...Several weeks ago I had a client inquire about a hunting bag that was very similar to yours. Anyway very well done
Ace, Fiebings also has a cherry colored stain that you mix with the oil I think we discussed the stains several months ago...under leather finishes.
-
Nice holsters, folks. I might steal that idea to make one for my brother...hmmmmm....
-
That's a good-looking holster, Outriider. I like the concho on it. Nice work.
Nice Frazier holster, Don. I like that one much better than the one in Packing Iron. The simple, clean lines work nicely.
Good holsters, pards. Here's what I've been using but it doesn't have a skirt and isn't very PC. I've been toying with a Wild bunch rig and it will certainly be much like the Frazier.
-
Howdy Don
Very cool. Like the design.
WC
-
;) :D A job well done to all, nice work pards. :o 8)
tEN wOLVES ;) :D ;D
-
Ten Wolves expressed my sentiments perfectly.
Beautiful work fellas. There is an incredible amount of talent here.
Many thanks to everyone for sharing their work and expertise.
-
arshall
I like that design...especially the open toe. the holster has nice flowing lines.
-
You boys have really been busy....I've pretty much had my nose in the books lately. I have been doin' some slim jim work though.
Don 101, I really like that hunting bag. Real nice. Those sawed off holsters are nice work as well. Yep, the concho is a nice touch. Thanks for the pictures fellas. Very inspiring work.
Hats off,
X Horse Pen
-
Thanks, Outrider. I made that one in a hurry when I needed a holster. I will probably make a Frazier No 9 like Don posted for the next one.
-
THANKS DON
ACE
-
:)Howdy Pards,
Well I finely got my friend rig made! it give me fits, but i got it done, I sure hope the old saying That You Learn By Yours Mistakes is true!! :( Because I sure made a lot on this one, bit it is out of here! And my bud was very please, he is now talking about getting another pistol :o :o I might get this club up and going again if i can hold out that long!!
Thanks for looking
ACE
-
Dang Ace!! Looks good!! You even did a nice lining on the belt. Spots too!!
Keep it up pard! I think you are learning from your mistakes just fine. Great job.
DM
-
I started lookin' into CAS and re-enacting at least 10 years ago. I bookmarked so many vendors' sites, especially leather makers, because I wanted to find the best lookin' holsters. Sure am glad I got all that web surfin' outa the way, cuz I gotta tell ya, folks, the best lookin' holsters and leather work I've seen has been right here! Great stuff. I sure enjoy lookin'.
BP
-
Ace,
Looks great!! On the belt I think if n it were me I would round the corners just a smidgen.
The holster is backwards though in less you are left handed.
Doing great Ace.
Johnny Dingus
-
Howdy Ace :D ::) :o 8) ;D
Will you got it done, and it looks fine I think you did a nice job on this rig, I also like the grain in the leather on the belt, it looks like a pebble grain, it stands out nice , and your use of spots looks good too, Ace every rig you've made has been better than the one before , so you are deffenitly making progress in your leather work, and I think you're having fun doing it, because it shows in your work. One thing like Johnny D. pointed out, you need to round and burnish the edges on the belt , they look a little square or flat, unless it's just the camera angle.
Talk to you later Pard
tEN wOLVES ;) :D ;D
-
You did a fine job, Ace. Nice work. I like the use of spots on it. I agree on the lining. I can see why your buddy was pleased. Keep 'em coming. Great progress. Your first 500 pieces will be out the door in no time. ;D
-
Thanks for the kuddo's :) Johny and Tw you are right on that the corners should of been rounded ??? But there wasn't any way to burnish the belt, that leather was gave to me, I was told it was Buffalo, but it is chromed tanned and streches, the lining is a vinyl car uplostry, and i did that to help with the strech, it started off 5" wide bye 5foot long, placed on a piece of 1/2" ply would stamped down and streched to the max! then it was out in the sun for 10 hours, and the staples were removed and streched and re stapled and then 10 more houres in the sun! Then it was cut to size glued to the leather that was stapled and streched, then i went to my 1920 dressmaker rotary maching, that i have put a hand crank on and sewed it up.
If I was to do another one i would round the corners! one reason I made it as strong as i could, his pitol is a stainless Black Hawk that weight 10lbs :o ;D :)
I One I am working on know will smoke that one I hope! Hey Johny, he is a south paw!!
Thanks again for the kind words!
ACE
-
Great job ACE!
Like your design and your use of spots. Keep em coming. Many thanks for sharing this with us.
-
Gettin' better all the time, Ace. Keep after it.
-
Howdy Ace
Keep up the good work....
WC
-
:)It does my heart good that you guys feel i am improving ??? I don't want to get in a rut making the same thin over and over, but to get better you have to make as many rigs you can afford to make. It is self helpfull when you think that that you are improveing!
Thanks again for the kind words!!
And I hope to see more from you guys, you are my inspiration to keep me going on!!
ACE
-
Well the more you make the more you want to make.
After shooting with my Dodge City holsters last month and them working out so well I decided to make some brown holsters with the same holster part but different. I want to be able to draw and reholster like the dodge city holsters but have a different look.
So now my problem is as soon as I get one set of holsters done or about done I am thinking of making another set and how they will be different from the ones I am working on now.
I am going to be one broke leather worker with all the stuff I want to make.
Well so here is my latest holsters. Like the dodge city but different. The pockets where the guns reside are the same.
(http://i26.photobucket.com/albums/c105/BlueViffer/MexicanLoop006.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/MexicanLoop008.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/MexicanLoop007.jpg)
Hope you guys like these.
Johnny Dingus
-
Those look good, Johnny. Simple border, concho, full skirt. Nice balanced loooking holsters. Good color on them, too. Now you're makin' your own patterns. That's what this is all about. We don't have a "thumbs up" icon, but if we did, I'd post it here. Thanks for the ;ics.
-
Howdy Johnny
Will I have to agree with Marshal Will, you did a nice neat job, your placement of the loop looks right on , and the concho looks good too, your border tooling is right on the money and lined up properly, it's a nice shade of brown, and you should be able to use it with any color brown belt, it will make a nice contrast.
Once you get going in leather, it's hard to stop, and your work will only get better with everything do, this is one of those crafts thats good to be hooked on.
Take care Johnny , and I look forward to seeing your next project ??? :D
tEN wOLVES ;) :D ;D
-
Thanks guys for the kind remarks.
If you look both holsters have the same border but could have been made by two different people. Though they weren't. The borders are the same but different and I used a backgrounder (I think that is what it is called) outside the border on the left side holster.
Now I need to make some period holster too. Have some of Will's paterns now that tandy had a sale so could do those. I also have his Black Canyon pattern and I grew up in the 50's with Hoppy, Gene and Roy...
It is addicting.
Johnny Dingus
-
Johnny,
Not much else I can ad to what MW, & TW said! Nice loking holsters!
ACE
-
Good looking work, guys! Everybody is really putting out some unique stuff!
-
Hidy boys,
I would have to agree with Santee. I am excited about the progress that the beginners are a making. Ya won't be beginners for very long as hard as you boys are a workin' at it. Keep up the good work fellas and don't ferget ta have fun experimenting. Lookin' forward to more pictures. I surely enjoy this forum, "Leather Shop".
My hat is off to every one of ya,
X Horse Pen
-
Howdy Johnny
Keep up the good work.
WC
-
Howdy Pards,
I have re-designed the 1911 .45 holster slightly. Since, it is lined (pigskin) and since the first prototype was a little tight I increased the size of the template and then added a 1/2 mainseam filler. The 1911 now slides in and out of the second holster without any type of wet casing. I also used a different stamp on this one and opted not to add the concho (can always be added later). The finish is mahagony
I have also re-designed the flap and the back on the belt bullet pouch that I had done at x-mas time. The original pouches had a two piece flap and back. I have now incorporated them into one piece. Finish is EVOO
Dalton...I will try to draw up the templates on the pistol caddy tomorrow. Give me your addy in an e-mail and I will try to get it to you next week
-
Now that's my kind of 1911 holster, Outrider. Looks just like what I'd use for mine.
-
I agree with Forty Rod, nice work Outrider, all around. ;D 8)
TW ;) :D ;D
-
That looks great, Outrider. I like the idea of putting a partial mainseam filler in it. That would make a good fit for sure. It looks good in that color, too. The bullet pouch is a fine one. EVOO makes a good finish. Thanks for the pics.
-
Nice! It would appear 1911 holsters are the rage. Maybe I'll make one for my brother...
Love the mohagany!
-
:)Outrider, those are beautifull, love both colors, realy like the 45 holster, i like the way you can lay your trigger fringer on the holster and when you draw your fringer will drop right in the trigger gaurd!!
Latter
ACE
-
That looks great, Outrider. I like the idea of putting a partial mainseam filler in it. That would make a good fit for sure. It looks good in that color, too. The bullet pouch is a fine one. EVOO makes a good finish. Thanks for the pics.
Marshal. at the risk of sounding dumb and uninformed, just what exactly is EVOO? I use mostly textan antique saddle tan paste followed by super sheen, and am more than satisfied with it's results. Very simple and basic I guess. I like the way the super sheen enhances the look of the finished product. It reminds me a lot of neatlac which we used back in junior high school shop back in the 50's. That was about the only option we had back then.
Patrick
-
One of the latest...
-
BI Bill,
Extra Virgin Olive Oil. Puzzled me at first too.
Kid,
That is simply gorgeous! I really like the balance between the carved area and the background. WOW!! ;D ;D
-
Ah, Ok. Duhh! Thanks Doc.
-
Howdy Kid
We haven't seen you around the forum in some time , it's good to have you back , and your new rig is awesome, your use of stamps is awesome too, everytime I see your work, even though it has always been great, it seems a notch higher than the one before, I don't know how you manage to do that but you do , and your tooling is almost too perfect, Well done Pard... ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Doggone nice rig, Kid. I also like the balance between background and design. So often we get all wrapped up in filling all the space with something. That's just right. Regarding the border stamp on the belt, I have one like that and never figured out a good use for it. Now I know. Looks great. Thanks for sharing.
-
:)howdy Kid, AWESOME RIG :o Super layout on your carving and your borders complement's the complete rig !
Super Good looking!
ACE
-
Very elegant there Kid!! DM
-
Real nice. Especially the carving!
-
Love the two tone effect with the backgrounding picking up a darker color.
The holster as all of yours are awsome!! The belt looks to match perfectly.
Johnny Dingus
-
Thanks folks,
A little background...
I've been looking to improve my carving skills.
I do not think much of most floral patterns for holsters.
I have always been fascinated by gun engraving.
I bought books and borrowed others to learn how to lay out scroll patterns.
After copying Nimschke for earlier holsters. I decided to do an original.
This is my take on a Cheyenne pattern holster with an American Scroll pattern carved into the holster.
The border stamp on the holster and the belt were made by Robert Beard.
These "Engraved Rigs" of mine tend to be award prizes for Cowboy friendly charities and a few pards.
-
Howdy Kid,
Very nice! You have created a real work of art. Look forward to seeing your future projects. Many thanks for sharing this with us.
-
Very nice piece, Kid. Very nice, indeed. Like the scrollwork very much.
-
Kid Cav, that's a beautiful rig all the way around. Carving, stamping, color, and finish. I have been wondering where I could get a stamp like the border stamp you used on the belt. The one that looks like a c scroll with a shell inside it. Which tool name and number is that from Beard?
Many thanks,
X Horse Pen
-
Kid Cav nice rig i admired this rig on the leatherworkers net i just love the scrollwork, Don
-
Kid Cav, that's a beautiful rig all the way around. Carving, stamping, color, and finish. I have been wondering where I could get a stamp like the border stamp you used on the belt. The one that looks like a c scroll with a shell inside it. Which tool name and number is that from Beard?
Many thanks,
X Horse Pen
HorsePen,
The stamp is called "Ram's Curl". Bob only makes it in one size. Be prepared for sticker shock if you aren't familiar with Beard's tools.
-
Thanks Kid Cav,
I spent money on worse and wasted it besides. ;D
Many thanks,
X Horse Pen
-
Another pouch bites the dust - the Plainsman/Frontiersman rigs are one of my most popular items and some of the funnest to make - this ones on it's way to Sweden - thought ya'll liked to take a look see of all sides this time....
(http://www.wrtcleather.com/1-ckd/1-2008/pouch-wahrme-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/pouch-wahrme-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/pouch-wahrme-3.jpg)
This one is buffalo hide lined with German Tan aka imitation braintan - all well aged - the color by the way is not walnut - anyone care to venture a guess - it is a common food household item - starts with a "c'
no fair Horsepen - you already know ya ole coon you......... ;)
Oh yeah the pouch goes along with this gunrig the gent picked up last year.......
(http://www.wrtcleather.com/1-ckd/1-2007/gunrig-wahrme-001.jpg)
!..........right now though I've got a tomahawk with beaded drop and two beaded sheaths with custom knives to get done so not much gunrig/cowhand stuff for a little while although I'm back on my feet and spending mucho hours in the shop doing catch-up....
-
CB,
GREAT looking pouch. I like the carving on the tabs for the pouch straps on the back! Boy howdy, ya sure did put a ton of spots on the gun rig! Small tacks?? All so evenly spaced. Looks like you done laid it out with a laser! :o :D ;D VERY impressive!
SWAG: coco butter??
-
Coffee.....
-
Howdy Bob - I reckon I'm not the only night owl - I'm trying to get the muscles to stop twinging after a 12 hour day in the shop at 90°...
That carving is our makers mark for this type work when/where my regular stamp isn't always possible/appropriate to use......it's made up of the Tau (my wife's choice) and the lazy eight - the lazy eight (aka infinity sign) is a symbol used by the metis (I'm mixed blood heritage)
On this belt I used two legged spots with a spot setter (the commercial hand spot setters are pretty crappy, designed all wrong IMO - I've been trying to get a tool maker to build some to my design, but so far things haven't gelled) rather than tacks - it gives a similar effect, but you don't lose them as easy as tacks - most of the original tacked stuff I've seen has some lost tacks.....IIRC there's about 250-300 1/4" and 3/8" spots on the belt.......I lay out the basic pattern before dying then just eye ball ........ not quite laser beam eyes but after a few thousand you get pretty good I reckon...I've done a couple of belts with 5-600 tacks - lots of pounding!!
SWAG: coco butter??
Nope - try again.......... ;D
-
Those are awesome Chuck!! I am going to mirror Kid's guess and say Coffee as well. It has the same color as my desk top, which also colored with coffee. ;D
-
Another master;iece, chuck. I love the beadwork on this one. I see more of those great antler buttons. They really add character to the whole piece. Interesting straps, too. It looks like those could serve to hang it on a belt or allow you to button on a shoulder strap. Nice touch. Thanks for showing us all sides of it. That's nice to see. Outstanding.
Since I can't think of anything brown that begins with "C", other than chocolate, I'll probably side with the coffee guesses. I must admit, I hadn't thought of coffee myself so can't lay claim to the idea.
-
:D ;D ::) :o 8) Beautiful work Chuck, and I'm glad to hear you're feeling better, you just can't keep a Cowboy down for long.
take care pard
tEN wOLVES ;) :D ;D
-
Kid C gets the kewpie doll! coffe it tis - been using it for years on buckskin and this is the first I;ve tried it on other types and BTW it works great on bark/veg tan - I'm getting a nice even true brown, which I don't alwasy get with walnut, and it's faster than walnut - a couple of hours and voila! Gonna get some dark roast and try it next.......make it strong like cowboy coffee about 1/2 and 1/2.........
and I can relax this AM somewhat - I always sweat overseas shipments and this AM got an email from the gent and he got his pouch safe and sound and even better loves it....
Marshall will - yep I like the "rings" too for the loops since they can even be made convertible, but sometimes, dependent on the customer's choice, they get sewn on solid....
-
I soaked a rawhide dog bone in strong coffee. Those things are really bleached out and the resulting piece looked more to the rawhide I wanted. Being a major Coffeholic, I think it is perfect for everything!!!!!
-
Kid Cavalier,
of all the holsters posted on this wire that i have looked at, your new holster is WOW.
there are some great looking holsters on this wire.
Your new holster just stood out from the rest of them :o
-
Knucklehead,
Thanks, that's high praise. I wish I could keep it but it'll go to a customer.
I'm still shootin out of the holsters I made seven years ago.
Working on a 7 1/2" now. It'll be a doosie.
Kid
-
:)CB,
AWESOME, I love the flare that you have for recreating the past :o Truley a Master Peice of art, If I was to try something like that, it wouldn't be on it's way to Sweden, it would be on it's way to the trash can :o :o ???
Kid, i wastn't leaving you out, your work is allways Fantastic!!
But because of you guy's, you give a lot of us the drive to improve our work! I never expect to be able to do that kinda stuff, my only hope is to get good enough to sell a few Rigs here and there! My back is never going to get better the surgeons tell me, so I look at it different than a lot do! You guys make your living from your Talent, and I am humble when anyone helps me out!
You guys have given me a reason to want to get up out of this bed no matter how much I hurt and try and get something done!
Like I posted here the other day, it takes me a long time to get a Rig done, and it should take me longer, so that I don't make mistakes!
I want to Thank ALL of you Pards, for being a inpersation to me :) :) :)
(sorry about my spelling, it hasn't allways been this bad)
Later
ACE
-
Chuck, that coffee stain turned out real nice. I'm gonna have ta try that out. Like ya said, it's cheaper than what I have been using. I especially like that percussion rig with all the spots. Thanks for the pictures...
X Horse Pen
-
Mr. Burrows, if you're not tired of hearin', I ain't tired of sayin' it: great work!. I just love lookin' at your work and how it's presented.
And you others: I am like that 6 year getting Rocky Colovito's autograph. I'm just so appreciative of your gifts.
I'm not a leather crafter, but I've been as passionate in other pursuits, so I can relate. Everyones' expression of creativity and commitment to both craft and era cannot be taken lightly. I am truly wow'd. Who'd a thunk?
This is one darn fine topic.
BP
-
Thankee all - I like looking at "stuff" too - whether original or current work, even after 47 years doing "this" I get inspred by other folks work.....
Here's that tomahawk I mentioned earlier - not cowboy but definitely western.......
Side one of the drop.....
(http://www.wrtcleather.com/1-ckd/1-2008/ruggie-hawk-800-500.jpg)
Side two.........
(http://www.wrtcleather.com/1-ckd/1-2008/ruggie-hawk-800-500-2.jpg)
What I intended the piece to portray
it's a three "generation" tomahawk....An 18th Century maple handled eastern tomahawk with brass fittings that went west, the braintan grip and small beaded "flares" were added circa 1830's (they are based on a Missouri Warhawk carried by the Mandan Chief, Mato-Tope in a painting by Bodmer in 1834), then the northern plains style beaded drop, with hawk bells and tin cone tinklers was added circa 1855-60.
The head is sealed with a braintan gasket like many originals making it smokable. The end plug and mouthpiece are made from deer antler - the mouthpiece is hidden by the rear beaded flare, which can be folded back to smoke.
The drop and grip are braintain and are coffee dyed (I never could stand the stuff other than with a shot or two of JD or Bushmills!) so I reckon I finally found a good use! ;D
The two knives are:
The one the left has a coyote jawbone grip, the right hand is a bear jawbone grip - both have buffalo rawhide wraps. The hair dangle on the bear jawbone is human - courtesy of my wife, Linda, who did the floral beadwork on the drop.....the sheaths are in the works......
Hope ya'll enjoy the look see.......and as always the real thing is better than the pics.......the odor alone adds a lot....... ;)
Anyone in the Lexington, KY area, August 15-16th,2008 should check out the CLA - Contemporary Longrifle - show - this piecealong with a whole bunch of stuff (291 tables and counting) will be on display there (But not me I will be nose to the ole grindstone...... :(
-
Howdy Chuck,
As always, looking at your work is like going to a fine Western Art Gallery. Many thanks for sharing your talents with us.
-
Doggoned awesome, Chuck. You always manage pull another beauty out for us. Fascinating beadwork on the drop. I really like how both sides are very different. Thanks for the pics.
-
Chuck i must admit being a reenactor i dont believe in ageing stuff that i use on purpose as it will through normal use, but i do love what you are doing and am slowly becoming a fan of your style of work, it just looks and i bet feels right thanks for showing the pics, Don
-
Great stuff Chuck. Can I ask where you get the trade silver/pewter cross? I have been looking for some. I was in Phoenix and went to the Heard Museum. They had a great Navajho belt bag circa 1880-1890 that had a similar cross and large silver spots. sketched it out and then have had trouble finding the cross.
-
;) :D ;D Beautiful work Chuck, that must have taken some time to put together, How much time does it take to turn a piece like this, your level of work is so perfect, I know you don't like that word , but for pards like be it's the only word I can come up with, You and some of the other Pards here on the forum like Ace says gives the rest of us Newbees something to shoot for. you uper level Craftsmen do what to us seems impossible and make it happen.
Like the others I look forward to seeing all the new things you've Made and what the rest of you pards are making too.
tEN wOLVES ;) :D ;D
-
I just finished a pair of step-ins for a show I'm working on about cattle drives. They will be used in a scene where cowboys come to town to buy new duds. These are made from original patterns and dies from F.A. Meanea Company that I acquired earlier this year.
-
Chuck,
Not much i can ad to what has been said! AWESOME recreation of a 1800' peice that would of belong to a Chief as I think you stated! The amazing thing is your forsite into a project and then just doing it!
I am very great full that you share your work with us, it gives me the desire to reach be oned the norm! As I am a newbie, with I look at work like yours and everyone else's, I try to let it sink in!
DC, I have been wanting to try some other area of leather work, ( I like those pants) I just don't have the funding to venture out and buy a lot od different leathers to play with. I am in hopes of some day getting good enough to sell my goods so that I might be able to go the extra mile and buy the hides and ect. that I need to do so!
Thanks all for sharing
ACE
-
Here's an update on my Paterson rig. I think I am done now with this project. Maybe. ;D
(http://i34.photobucket.com/albums/d133/lennowenoxie/P8010075.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P8010076.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P8010077.jpg)
I took pictures of it from left ta right.
X Horse Pen
-
I also got a couple pairs a straps done. Here they are.
(http://i34.photobucket.com/albums/d133/lennowenoxie/P8010073.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P8010072.jpg)
The ones on top are from Will's pattern pack with a little difference in the tackin'.
The bottom pair I engineered from the Texas Ranger picture on ppg. 95 of "Cowboys & the trappings of the old west" book.
Have a party, ;)
X Horse Pen
-
Very nice Horse Pen!!! You gonna go to Hill City in October and shoot? I am heading there this sunday, and hopefully in Oct. DM
-
WOW, Horse Pen these items are Beautiful and Awesome, I really like the way everything looks , and I especially like the way you did your spots , and the way you mixed brass with nickle, I like this look, I've been planning on doing the same thing myself, your rig looks like something a well dressed trapper or scout might have worn in the day, the color and tone of the leather is beautiful, with the light and darker shades, what did you use to get the color? it really looks rich and it has depth, I've admired all along how you do you stamping, everything is so perfect and lined up right. Did you make the knife sheath too, and how about the brass tip on it, I thought I was looking at one of Chuck Burrows projects, Thats about as big a compliment as I can give you on this , and you deserve it. ::) :o 8) :D
Horse Pen Thanks for sharing Pard ;D
tEN wOLVES ;) :D ;D
-
Horse Pen,
TW said it all.......
It looks fantastic!!! Your color, the perfect stamping. Just Beautiful.
And how about the knife sheath tip?
Johnny Dingus
-
I appreciate all the kind remarks fellas. I do admire Chuck's work and I have been coached by him a whole lot. He is like a big brother to me. I do things differently of course because we come from different angles to get the same end. I used Dalton's idea on the buffing back the leather after dyeing. I use green scotch-brite pads though. I then over dye with Hi-Liter to deepen the red. The base dye is a good baptizin' in Feibing's med. Brown and left to dry over night. Then buffit and Hi-Liter it. then burnish and EVOO and wax. I like to use boot wax and/or beeswax. Boot wax comes in all colors and gives a different look depending on which color is applied.
The knife work? Naw, I didn't make it. A buddy made the knife and sheath. I just did the finish to match the rig. Another buddy made me the pouch about 3 years ago and I spotted it up to match the rig and aged it up some as described above.
Dalton, school has started and I ain't sure about when and where we'll meet up but we will. I am looking forward to it.
Many thanks,
X Horse Pen
-
Those look like great chaps, David. How cool to have original patterns to work from. I like the contrasting belt to offset the lighter color. Nice work.
Great rig, X-pen. I like the simple design to go with the simple lines of the pistols. Nice tie-in with the spots on the belt and pouch. those spur straps work nicely with the geometric pattern. I can't tell how the black ones fasten. I guess you have a hidden flap on the back or something. I like'em.
Great work, pards. Thanks for sharing the pics.
-
I just finished a pair of step-ins for a show I'm working on about cattle drives. They will be used in a scene where cowboys come to town to buy new duds. These are made from original patterns and dies from F.A. Meanea Company that I acquired earlier this year.
Howdy David :D
Will I guess I missed your chaps, don't know how that happened , but it did , your chaps are beautiful, it must be neat to step back in time, when reproducing F.A. Meanea Co. products, I know it would be for me , let us know what picture these chaps will be in , and when it will be shown, you do nice work Pard, Thanks for sharing with us.
tEN wOLVES ;) :D ;D
-
Marshall Will, those black (dark chocalate) straps with the spots don't have the keyholes punched in 'em yet. I'll fix that situation when I get my old timey boots.
David, those chaps are real nice. I like the cut of 'em. Thanks for showing 'em off to us. Keep the pix comin' and keep up the good work.
X Horse Pen
-
Nice chaps its a shame the pic is so small,
HPHenry what does one say i love the rig and straps very nice quality work, Don
-
Awesome spur straps!
-
Thank you for the kind words on the chaps. For some reason, that is the largest picture I can figure out how to post on this forum. I have put a couple thumbnail pics on my website for a better view. Thanks!
http://www.carricoleather.com/mcclellansaddles/meaneacompany.html (http://www.carricoleather.com/mcclellansaddles/meaneacompany.html)
-
Marshall Will, those black (dark chocalate) straps with the spots don't have the keyholes punched in 'em yet.
Thanks, I was wondering about that.
Thanks for the link, David. Those detail photos really help to see how great the chaps really are. Nice work.
-
Yes sir, they look like the ones in his old catalog. Lot a fringe cuttin' a goin' on. Whew!!!
X Horse Pen
-
Nice chaps David! - here's a pic of an original pair by Meanea that look like that same pattern that I figured you might enjoy. The pic is a copy of a B & W photocopy si it's not the best image - it's from "Cowboy Culture: The Last Frontier of American Antiques"
(http://www.wrtcleather.com/1-ckd/cowboy/meanea-chaps-1.jpg)
-
That's neat! Thanks for sharing Chuck!
DC
-
Howdy Pards,
I finally have finished the prototype of the belt slide for the .45 auto mags. I see some areas that have to be cleaned up for the next one but overall it's not too bad. One of my shooting pards will try it out the next time they have a Wild Bunch side match.
-
Howdy Outrider
Nice work on making the pouches, they all look nice and even , a pard could go to war with this setup, Well done 8) ;D
tEN wOLVES ;) :D ;D
-
:)Howdy Outrider,
That is a nice looking holder for you 45 acp mags!!! What oz leather did you use? Looks like you had a grreat deal of fplding envolved to make them look so awesome! I havn't started a rig for my 45's, because I don't excatly know what type i what to make! This is a first year for being able to get a consealed weapons permit. So I am on hold!
Great Job, They are AWESOME!
Thanks for sharing!!
ACE
-
Howdy Pards
Here's a pair of Cheyeene Holsters I just finished, they're for my Ruger NM Vaquero's, the finish is Natural Walnut Dye, Lexol, EVOO, and Skidmores Leather Cream.
When I did the border stamping I used a Little bit of all you pards, and you know who you are, when you take a look see, Thanks for the ideas Gents. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Very nice job 10W.
Definitely a good lookin' rig there pard.
-
Great mag holder, Outrider. How did you know I was going to need to make something like that? I was considering doing three separate double-up ones Now I may have to reconsider. That looks good. Nice and even. Practical design, too. Nice work.
10W, those look great. Very period looking. Nice use of the curved stop stamp on the border. It isn't easy to do that evenly like you did. Lookin' good. I like the color, too. Did that shading near the edges occur on its own or did you come at it with an airbrush? That walnut dye sure doesn't look anything like mine. Of course, I've added the steel wool then russet to compensate.
10 minutes later: OK, 10W, I saw your posts on the walnut dye thread so I know how you got the color.
Thanks for the pics, pards. :D
-
Beautiful Job tEN wOLVES.
Now you need to post a report on how well they worked at the next shoot.
Love the color.
Johnny Dingus
-
Ten Wolves, I likee!!! Nice stamp work right there and the color turned out real rich. Absolutely Bee-you-tiful. I like the seeder and melon seed lookin' thingy on there, too. The stitchin' wheel along the outside of that sets it off nicely. Two thumbs up!!!
Stay busy, ;D
X Horse Pen
-
tHANKS aLL
I really appreciate all your kind words , it felt good for me to get something back in here again, it's been too long.
Horse Pen, I got that seeder thing from you , I've always liked the way you incorporate it into your work. ::) :D ;D
Irish Dave, that one stamp I used on my border, will I got the idea from you on one of your holsters.
So I think I have a little bit of everybody in these holsters, so Thanks :D ;D
tEN wOLVES ;) :D ;D
-
:o TW, Them there pair of holsters are sure PURDY and very nicely done, fer a cow poke with a lame arm and shoulder!!
Isn't it purdy hard to sew them up with one had and your teeth? ;D :)
Those are awesome Bud, I like they way you desiged them!!
Thanks for sharing Pard
DC, sorry about being late on my post on the chaps, I wanted to go to the home page and get a bigger look and I did, very nicely done!!
I wished you would of had a front side view! Do they call them chaps or some type of range pants?
ACE
-
TW, are those holsters for a pair a 5 1/2" barreled pistols? The more I look at 'em the more I like 'em. I am beginning to warm up to the addition of conchos on holsters. I may not wear 'em on mine but I am likin' the looks of 'em.
You guys are a bad influence on me. ;D
X Horse Pen
-
Since I can't think of anything brown that begins with "C", other than chocolate, I'll probably side with the coffee guesses. I must admit, I hadn't thought of coffee myself so can't lay claim to the idea.
[/quote]
Been a while since I last read this forum. Been busy with all sorts of stuff.
Boy! There's a lot GREAT work comin' out of you guys!
Speaking of coffee color, had a guy ask me about making a case for some throwing knives for him. Sent me an e-mail with a picture of a motorcyle tool bag and wanted something like it. I asked him what color and he said "Havanna, like coffee beans". Reckon that's what color this is? :D
-
Ace,
The belt slide main body is 8-9oz. and the loops are 4-5oz. I had to close off the bottom of the loops because of the possibility of a round being ejected out of one of the magazines. The color id Fiebings Light Brown
Horsepen, Like you I don't care for conchos or silver on my personal gear but I do like to look at samples that do have the glitter. Maybe in moderation...
TW...you old dog you...fantastic looking holsters..I'm glad you hung in there your doing great work. You know come to think of it I never did get ahold of those people at EMF...I must do that soon. Problem is I keep jumping from the Great Western II's to the NMV, and then the OMV. I still have a great passion for the OMV Bisley...love the feel of those grips.
-
Howdy Gents
Thanks Ace, I like the way they came out, and yes making and sewing these was a task, I'll be glade when I can get this surgery done and behind me.
HorsePen, the holsters are for my 5 1/2" NM Vaquero's, as far as the concho's go, I've always liked the use of them, as long as it's not over done, dressing up the holsters and leaving the belts plain was common in the day, and then like my wife says, some times LESS IS MORE ??? ::) :o :-\
Kid Sheleen, I didn't use coffee on these , I used natural walnut dye , but I'm going to give the coffee dye a try, I like all the different colors of brown.
Outrider, thanks for the kind words Pard, when it comes to the bling, I like it both ways , if there is a lot of good looking tooling /carving/stamping, I'll tend to leave the concho's off or use very little , if I have a border stamped with or without tooling,( a small amount of tooling ) I think the use of spots or concho's looks good , and then just a basic border stamped holster looks good just plane. I'm going down to E.M.F. on Monday to pick out a Sharps Rifle, so if you want me to say anything to them , let me know?
Take care Pards ;D
tEN wOLVES ;) :D ;D
-
;D Well here they are as promised. The first holsters from my hand since 1986. Made from 9-10 oz. leather,pattern by myself and no excuses. Seriously, as all of you have said so many times,we are our own harshest critic. But, in this case I had so much fun the last 4 days I am not even going to comment on what I think of them. I will leave that to you all.
I will tell you the cylinder case will have to be reworked( no plan before i started). The knife and sheath are items that I made almost 25 years ago.
Let me know what you think.
Gun Butcher
-
whoops :-[ I guess I should post a picture of a knife and a cylinder case if I"
'm going to talk about them :o
-
Gun Butcher,
Ya done real good!! ;D You should be feeling PRIDE!
-
Well, GB, 25 years didn't hurt you any. Nice, flowing lines. Very fluid, a nice look. Great color, too. You did a great job of matching the new stuff with the old color. A little time and they'll be exact. Good work, pard. Thanks for the pics.
Welcome back. Looking forward to more of your work.
-
I do appreciate that Dr. Bob. It ain't pride if you lay it out in front of you on the floor and stare at it for 4 or 5 hrs is it ?
I did find that they get a little uncomfortable wearing them whilst sittin' in my lazyboy ;)
-
You know it's funny. I didn't plan on matching the color of the sheath, it must be my favorite because i had already stained the belt and one holster before I realized it matched.
Thanks Marshall Will , you pards on the forum are the inspiration. Now I need to practice lots and lots!!!
GB
-
Gun Butcher,
Superlative! I like yer use of volutes. Especially on the holsters. Real nice rig.
X Horse Pen
-
Thankee Mr. Horsepen, coming from you them is kind words indeed as I have always found your work to be of the highest quality. GB
-
Really Nice Work GB.
The color matches real well and I like your use of spots. Draws your attention.
Johnny Dingus
-
Well, GB, 25 years didn't hurt you any. Nice, flowing lines. Very fluid, a nice look. Great color, too. You did a great job of matching the new stuff with the old color. A little time and they'll be exact. Good work, pard. Thanks for the pics.
Welcome back. Looking forward to more of your work.
Hello Gun Butcher
Marshal Will, said it well, Nice job Pard, ;D 8)
tEN wOLVES ;) :D ;D
-
Nice job, GB. Looking good.
-
This morning, I finished up the Frazier holster I've been working on for Wild Bunch matches. This was one day in the walnut dye. It came out nice and even, but as it dried, it left light areas where the strap connected with the rest of it. Any ideas why this happened? I actually like it, but would like to get that effect when I choose, not when it wants. ;D
-
I have seen that happen before Marshall but I'm at a loss as to why. Its almost as though the top piece leeches the color out of the bottom. However, it is beautiful work very clean lines and the stitching is outstanding. I'm gonna have to get me one of those so I can build something for it. GB
-
seems we are all on a 1911 kick lately...great work there Marshal. When I first saw this type holster in PI I really didn't like the deep recurve. But on this one it looks kind of nice. Maybe I will do one and just do a little mod to it ;D ;D ;D ::)
-
;) :D 8) Hello Marshal, I like your holster, nice design and well put together, I answered your question about the light spots on the other post ,( testing natural walnut dye ).
tEN wOLVES ;) :D ;D
-
seems we are all on a 1911 kick lately...great work there Marshal. When I first saw this type holster in PI I really didn't like the deep recurve. But on this one it looks kind of nice. Maybe I will do one and just do a little mod to it ;D ;D ;D ::)
When I started making it, I thought about that deep recurve and thought, "What's that all about?" but made it anyway since it was one of the main characteristics of that holster. Having tried it out, I know why. When you draw, you put your forefinger straight out and it rests mostly on the pistol. as you draw, there's no drag on the holster from your finger and the gun slips right out with more control than if you were pulling it with your three fingers only. As you point the pistol, your finger is already in position to slip onto the trigger. Darn functional design.
Thanks for the post, 10W, I'll go check the other thread.
-
Hi Will that holster has turned out a dream, and i like the light color too the stitching is great,
did you put in a welt at the top of the main seam? i found that if the holster is to tight and there is presure on the mag release button it can pop the mag some times, Don
-
This morning, I finished up the Frazier holster I've been working on for Wild Bunch matches. This was one day in the walnut dye. It came out nice and even, but as it dried, it left light areas where the strap connected with the rest of it. Any ideas why this happened? I actually like it, but would like to get that effect when I choose, not when it wants. ;D
Marshall Will,
For the life a me I can't find anything wrong with that holster. The border is perfect, stitching, color, shape,etc...
And I can be derned picky sometimes, too! ::)
Real nice work. Keep it up!
X Horse Pen
-
Hi Will that holster has turned out a dream, and i like the light color too the stitching is great, did you put in a welt at the top of the main seam? i found that if the holster is to tight and there is presure on the mag release button it can pop the mag some times, Don
No welt, but thanks for the heads-up. I'll watch that and correct it if need be.
-
For the life a me I can't find anything wrong with that holster. The border is perfect, stitching, color, shape,etc...
And I can be derned picky sometimes, too! ::)
Real nice work. Keep it up!
Thanks. I guess we really are our own harshest critics.
I have the second Frazier holster finished. Well, maybe. I did exactly the same as I did with the other one. It was in the walnut dye an additional 6 hours, not enough to make any difference, but I got tired of waiting. It’s all finished now, except for oiling. Then I got inspired by Chuck’s latest project pics and thought it might be interesting to see what would happen if I threw it in some cowboy coffee to give it a slightly different shade.
I broke out some fresh beans: genuine San Francisco Bay brand 100% shade-grown USDA certified organic Rainforest Blend (a superlative blend of the finest Arabica coffee from Columbia, Mexico, Guatemala and Indonesia), flavor guaranteed, priced to pay for the beautiful label, and started grinding. Don’t get me wrong, I don’t drink the stuff. I bought it thinking it would be great, but I wasn’t impressed. Folgers is much better. This has been sitting around for a while waiting for the right person to dump it on (no pun intended) (well, OK, pun intended). Rather than waste it, I ground the whole thing and put about a pound of it in a gallon or so of water. It boiled for 1 ½ hours, until the pan started popping because of the grounds lying waterlogged on the bottom inhibiting the bubbling action. After it cools, I’ll try a scrap of leather in it and see what it does overnight. Then, if it looks good, I’ll do the whole holster. If it's too wimpy, I’ll strain it off and boil the other pound or so in the same brew. Any of you experienced coffee dyers, feel free to chime in with any suggestions and advice. At any rate, if the coffee works right, I’ll have a different look when I’m done. Time will tell, I guess.
-
Try putting your gounds in a cheesecloth bag. That should prevent the popping of the grounds on the bottom of the pan.(suspend the bag so it doesn't touch the bottom)
This will allow a longer simmer time that will give you a darker color.
I have always used generic dark roast coffee.
Kid
-
Thanks, Kid. I'll do that. How long do you simmer it?
-
I'll let it stew until I start smelling that burnt coffee aroma.
I use a whole pound bag of fine ground dark roast.
-
Sounds like I'm there. It spent the last half hour smelling like I'd burnt it. Thanks. I'll test it.
-
Marshall Will,
Anytime I hear someone say,"Watch this!" I always naturally look that direction. I am interested in watching what you experimenters come up with. Be sure to show pix. All of ya sure are a lot a fun. ;D
I am bettin' on a nice dark brown color.
X Horse Pen
-
:)Howdy Fellows,
I guess maybe one of the reason i feel at home on this forum is i am kinda like you all are, I like to play! The otherday, I pickup a small handfull of little green pecans, put them in a coffee can with a cup of water, turn on the burner on high and let those little babies boil for 10 minutes, there wasn't much water so they boiled fast, and then I turned it off and put 2 cup more water in it and let it sit, i forgot about for about 5 days, and I look at the water and man it was getting dark!! I put a small scrap in for 24 hours and pulled it, it came out greyis and brown, the scrap I put in was real light colored let it dry and put some EVOO and looked, not to bad of color!! So I am going to get a couple more hand fulls and put in there with another 2 cups of water and cook it a couple times and I will let you know how it looks!
Later, Have a good Day
ACE
-
Howdy Gents
Kid, Marshal Will, and ace, I'm looking forward to seeing what you pards come up with, I'm like HorsePen I like seeing new things, it stirs my thinking process. ::) ??? :o :-\ 8)
Four Clicks to ya All ;D
tEN wOLVES ;) :D ;D
-
well this is a job im doing at the moment for a friend of mine that is quite tall so ive extended the boot tops by adding a stiched brown piece with scalloped lining its an awquard task to line everything up and you have to open the boots half way down the seams and then restitch by hand, Don
-
Cool, Don. What thickness leather did you use?
Marshall, did the coffee add any decent color yet?
-
Howdy Don,
I like the way you cut the lining into tiny scallops and let them peek over the top of the boot. All around very fine and professional looking job.
X Horse Pen
-
Nice work, Don. I like the finishing touches on the top and botom edges. Very attractive.
-
thanks guys,
the leather front is about 5 oz calf leather and the backing is like a supple glove leather of 2 oz, Don
-
Howdy Don101<
All I can say is AWESOME :o :o :) Those are super!!!!!!!!!
I might be able to do a lot of different things, imight try a lot of things! But I am am not going to try anything like those!!
Don, Stand Pround my friend! Those are out off site!!
ACE
-
A couple of sheaths and it's 3:00 in the AM........ :P ;D :P
A Mexican loop.....
(http://www.wrtcleather.com/1-ckd/1-2008/sheath-cowby-peterson.jpg)
A fancy beaded one with buffler hair tassels - I built the coyote jawbone knife too....
(http://www.wrtcleather.com/1-ckd/1-2008/morin-coyote-jawbone-3.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/morin-coyote-jawbone-2.jpg)
-
:)Good Morning Chuck,
Those are Beauitfull :o, Out standing!! I have no words to explain the inspiration that your work gives me! If I remember right you live out west, but I can't remember just where? I plan on coming out west in late Oct. to the Walla Walla Washington area, but I think you live to far from there for me to ask to drop by and say HI.
Maybe some other time!
Love your work!!
ACE
-
More of that great beadwork, Chuck. It's most impressive. The knife is something, too. Did you make the handle from both sides of the jawbone put together? It really looks good. I also like the Mexican loop. The skirt is perfectly proportionate to the scabbard. Those border stamps work really well, nice and clean with a quality look. Thanks for the eye candy this morning. :D
-
Beautiful work Chuck, I really like your use of spots , and border tooling, and I'm going to have to give your coffee dye a go , the color is absolutly beautiful, I think you have this holster and knife sheath thing down Pard, and by the way I got those tools for making holes for the spots , and the tool for setting them , now I need to give them a work out, anyway Chuck your work is a job well done for sure, Thanks for sharing , and keep them coming. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Chuck,
Thanks for using both the left and the right scroll stamp for the loop sheath. Bothers me when folks don't think of that.
I wish I had the patience to do all that bead work. It's beautiful.
Kid
-
Love that border on the knife sheath. Just an all-around wow!!!
-
As usual, there's some great leatherwork being shown on here. :)
Here's my latest foray into concealed carry; a paddle holster for my brother-in-law for a K Frame Smith .357. The welt on the paddle holds it in your pants, but just in case there's a removable belt loop on the front.
I think I'll make one for my Colt SAA 4 5/8" just for fun! :D
-
Hello Kid
Beautiful work pard, and well built too, this is a nice working pattern, I think your 4 5/8" colt would real comfortable riding in this holster, are going to leave it natural, it looks good right now, or are you going to put some color on it, either way your brother in law should be real happy with it. WELL DONE ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
As usual, there's some great leatherwork being shown on here. :)
Here's my latest foray into concealed carry; a paddle holster for my brother-in-law for a K Frame Smith .357. The welt on the paddle holds it in your pants, but just in case there's a removable belt loop on the front.
I think I'll make one for my Colt SAA 4 5/8" just for fun! :D
Beautifully carved, Kid. Thanks for showing it off! My favorite style a carving. Aww heck! I like it all.
Thumbs up,
X Horse Pen
-
:)Kid, There just isn't anything think else I can, that hasn't been said except the work on it is AWESOME!!
Thanks for Sharing
Greg
-
Great job, Kid. I like the floral design on it. The paddle should work good. Thanks for the pics. Be sure to post a pic if you make one for your SAA. ;D
-
Thanks guys! :)
Ten Wolves, I'm going to leave it natural. He likes the color of the leather so I'll probably put on a light coat of olive oil first and then a light spray coat of resolene on it after that.
-
OK, thanks to Outrider's mag holder pattern and some measurements I took off a canvass Army issue mag holder, I have a rig ready for our Wild Bunch match. These'll hang on a Mills shotgun belt. I didn't include the belt because I don't have a good one yet. Still looking but I have a month to prepare.
I didn't notice until I posted the photo but I see the pistol isn't all the way down in the holster. That's OK, we're looking at the leather anyway. ;D
-
Marshal...looks great..I like the mag pouch...i guess I will have to make another one for the two mags... :D That holster kind of grows on you ;D later
-
Howdy Will
Excellent work Will, that's a HUM DINGER if I ever saw one, and it still looks Cowboy. Well done, that must have been some good input from Outrider. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Thanks, pards. I'll be making another pair of the mag holders so I can carry 6 mags (need up to 5 for SASS WB matches but a 3-up wouldn't look that good) and look somewhat historically correct. I suppose I'll have to make a tooled one next but I wanted this to look semi-military.
-
Marshal...looks great..I like the mag pouch...i guess I will have to make another one for the two mags... :D That holster kind of grows on you ;D later
Boys, where would I find a pattern for a 1911 like that? Kinda wanna make one for my brother.
-
Howdy Pards,
Well, here's my story and I'me sticking to it :D I had one of my shooting pards ask me to make a knife sheath to match the double rig I had made for him earlier this year. He handed me a beautiful knife which he had made out of a leaf spring and it had a real Ivory handle with brass furniture...really one excellent knife. Then he says I thought you would need the knife to fit the sheath so I made a wooden duplicate for the fitting...he then hands me a wooden knife????? Well, here's the results with the wooden knife :D :D
-
Nice sheath, Outrider. I like the thong on the strap to hold it closed. Nice lines. Good job. That wooden knife is a work of art in itself. :D
Santee, I sent you a pm.
-
Outrider, that's quite a sheath and quite a wooden knife and one heck of a yarn. :)
Lordee, it's been quite a week.
Cheers and pass the tequila,
X Horse Pen
-
:) Outrider,
That is AWEOME, I like that sheath :o Great design, I like that stamp I use it a lot,and I have it's older brother that has a differnt flower in it!, you realy took your time and did it right, very professional!
Thanks for sharing, and maybe one day I will be able to turn out something like that!
Thanks For Sharing
ACE
-
Thanks for the compliments guys
Horsepen...that really happened. I delivered the sheath today and the guy actually asked for the wooden knife back. :D :D :D
He was very pleased with the outcome but made me chuckle about wanting the wooden knife back. When he did this his wife just shook her head back and forth. hehehe
-
Great work outrider.
Now for something a little different. I have been fascinated with the Botas de alas that WRT puts out and that leads to trouble on a rainy day. Here I am sitting out the monsoons that Tropical storm Fay has so graciously brought to southern Alabama and I suddenly remembered an old pair of Plains Indian leggings that I had packed away. Any how, to make a long story short, here they are and man if I ever wanted a pattern more than I did today I don't remember it. But, once again, it was a neat learning experience.
Botas de alas a la Gun Butcher. :-\
-
Howdy All
Outrider & Gun Butcher, you pards are a hard act to follow, Outrider your sheath is real nice I like the design, and the way you laced up the loop.
Gun Butcher, nice botas pard are going to be wearing them, you'll be a daisy if you do , just kidding they look great, I'm going to have to give chap making a try one of these days.
Ten Wolves ;) :D ;D
-
Howdy Gents
This isn't much, and the pictures don't show everything that I wanted, all well , I'm far from perfect.
I made a Creedmore Soule site cover, and one for the front spirir level site, to use when I have my Sharps Rifle in my gun cart, just to help keep it clean, so here they are,
tEN wOLVES ;) :D ;D
-
Ten wolves, Isn't it amazing what you cancome up with, nice work pard and they look like they'll get the job done.
I should have taken a picture with the Botas on but I couldn't figure out how to shoot them upside down
Ah ha, the better half just walked in and now I can show you what they really look like.
-
BTW, the rifle under that fine leatherwork ain't half bad either ;)
Gun Butcher
-
Nice botas, GB. Cool the way the top piece isn't symmetrical where it hangs down. Good item.
10W, those sight covers are great. That'll protect them for sure.
You pards are working overtime with the ideas, these days. :D
-
Thanks Marshall W, I thought about that for awhile and decided I liked the look of the tails of a hide I had. The conchos are off an old saddle that I tried to bring back to life many many moons ago. Still had them in my old tool box . Never know when you might use something ;) GB
-
Howdy Pards
Gun Butcher, now that's what I'm talking about, they look great. And thanks Marshal Will for kind words.
I'm glad you Pards like my Sharps and the fringie do dads, I think they will work out ok, I put some small holes in them to provide some air so they wouldn't sweat or get any humitity build up, that can be hard on sites.
tEN wOLVES ;) :D ;D
-
Ten Wolvws...wow nice looking rifle you got there...welcome to the long range buff snipers association. I am assuming you got it in 45-70
-
Back at ya Outrider
Thanks I'm glad you like my Rifle , and yes it's in 45/70 I defnitely didn't need anything biger than that, and I will be looking forward to going to the range and spending hour after hour making that special recipe don't ya know.. ::) ??? :o 8)
tEN wOLVES ;) :D ;D
-
Thanks for the compliments guys
Horsepen...that really happened. I delivered the sheath today and the guy actually asked for the wooden knife back. :D :D :D
He was very pleased with the outcome but made me chuckle about wanting the wooden knife back. When he did this his wife just shook her head back and forth. hehehe
Should a handed the knife ta her............ ::) ;D Then again......................maybe not. :-\
Gun Buther, that ain't a bad lookin' pair a botas..........I had the same thing in mind to do with my old leggings and they weren't enough left of 'em. I made to many pairs a moccasins out of 'em I guess. I'm gonna have to start from scratch when I can......Mighty fine job there.
Cheers,
X Horse Pen
-
Horsepen, I didn't have a clue what I was doing. I have a copy of Hansons Mountain man Sketch Books and that leaves a lot to the imagination when it comes to a pattern. And the leggings were one of those things that you havn't seen in 10 years then you start looking for something else and you find a treasure troveof items you had forgotten. GB
-
Horsepen, I didn't have a clue what I was doing. I have a copy of Hansons Mountain man Sketch Books and that leaves a lot to the imagination when it comes to a pattern. And the leggings were one of those things that you havn't seen in 10 years then you start looking for something else and you find a treasure troveof items you had forgotten. GB
I know what ya mean.....I have done that too. Things I used to never care for much are now something I darn sure need ta have. ;D
TW....while we're on the subject of Sharps rifles.....which maker is yours?? I may have missed that if ya said. Fine lookin' tool.
X Horse Pen
-
Awright, I know I saw it on here, the post by Will Wingam with all the links . Where'd it go?
-
Hello Forty Rod
Is this what your looking for
tEN wOLVES ;) :D ;D
http://www.cascity.com/forumhall/index.php/topic,13207.0.html
-
Ya beat me to the draw, 10W. Thanks. ;)
-
Hail yayuh! Thanks a bunch. Got it saved now (If I can rememeber what I named it. :o ) and thanks to you both.
-
Howdy Pards,
I have finally finished a set of Will Ghormley's Single Strap Saddle Bags. I changed them a little in that I added a piece of calf "hair on" to the main flaps. I found this nice piece of "brindle" colored calf skin and really liked the coloring of it. Anyway. I would appeiciate it if you pards could critique these bags so that I may do better on the next set. Give me some opinions here fellows
-
By the way these are finished just in time for the gun show tomorrow. Here are the other two photos
-
Outrider, those look great! The only thing I see wrong is that there is 1 hair out of place on the calf skin. Actually I dont see even that. It looks good.
I just cut out the same pattern, but havent tooled anythng on it yet. I can sure appreciate what youve done to that. Looks great. DM
-
Thanks Dalton. The one thing I noticed was the edge of the flap looks loike there is no hair there. The hair is there but I think I will have to put some NO More Tangles on it and brush it down. On the next pair I think I will modify the design making the rear pouch and the cross over piece one...and make the front cover a sew on. This way I can insert a center section of the crossover piece if necessary. We will see
-
WOWezers :o :o :o :o
Nice set of bags you have made.
one thing i would look at mabey put some hair on hide on the strap(the one coming from the top).
may even try a different color of hair on hide for the strap.
thats the only thing that i would look at doing a little different.
-
Nice job, Outrider.
-
:) Outrider,
Even though I am a newbe to this art form> I do know good craftmanship from average to poor! I would rate your bags as Triple A being the highest there is! They are so uniform it unbeilable, the calf skin gives a delitefull contrast effect, and i must be honest, if you would of just used leather instead of the calf shin they would of looked great, but they would not caught your eye as those do :o :o I think they are just classy, and I like the unusal border design, for that was the secong thing that caught my eye!
KNow you must remember I am a rookie!
But if I had a good back and a horse, I would be pround to buy them, but they are allmost to prudy to use :) :)
Great Job Outrider, and thanks for sharing!!!!
ACE
-
Knuclehead. I see what you mean..I did consider placing the upper strap through two slots behind the hair on piece...next time I will hide that upper strap. Thanks for the input...always looking for better ways of doing a job.
-
Those are really nice, Outrider. I like the hair on for the flap. The stamped pattern is just the right amount for the whole thing to look balanced without overdoing it. The only thing I could possibly suggest is a slightly darker color on them so the brindle is a closer match. That is just personal preference, mind you, not good or bad. They are very well carried out. I love the stitching close to the edge like you did. It really makes a clean look. Yep, You can do those again. :D
-
Howdy Outrider
That is a damn fine job.
WC
-
Thanks Dalton. The one thing I noticed was the edge of the flap looks loike there is no hair there. The hair is there but I think I will have to put some NO More Tangles on it and brush it down. On the next pair I think I will modify the design making the rear pouch and the cross over piece one...and make the front cover a sew on. This way I can insert a center section of the crossover piece if necessary. We will see
That's a good idea if you have a piece a leather big enough. It appears that there are many of us building saddle bags at this point. Thanks for showing us yours, Outrider.
Good stuff,
X Horse Pen
-
Well here I go again. I am going to call this one my working rig. Not as fancy as the first one but I think I like it better because of that.
You Pards out there need to chime in and let me know if I am doing anything even a little wrong. I don't want to develop any bad habits ( or at least not new ones ) that might bite me later. Lord knows I have enough of those already. Let me know what you think
Lessons learned 1. Old leather does not dye like new leather.
2. See no. 1 ::)
Gun Butcher
-
GB,
Looks great to me! Nice clean lines and the stamping looks very uniform. Be proud of this rig!
-
Thankee Doc, you are a gentleman and a scholar and a damn fine judge of horse flesh as they say. GB
-
Lookin' good. That border is really simple and effective. Well done.
-
:)GB,
Very nice looking rig, very clean lines, I realy like them,
Thanks for sharning
ACE
-
Outrider, nice work! I wonder what it would look like with a British tan...
Did it take you a long time?
Gun Butcher, that's a terrific rig. Neat border.
-
Gun Butcher,
Coloring looks great don't understand dye comment.
Holsters look real nice with the matching belt!
Outrider the saddle bags look real nice, but I agree I would need them a little darker. Now if I could do as good of work I know I would not be so critical. I would be happy with them even if they were a yellow color.
Johnny Dingus
-
Johnny, Tthe dye comment was because you are looking at the second belt. I tried to use one that has been stuck ina box for about 20 yrs and i could not get it to match the holsters. Don't know what the problem was but I won't try that again ???
Gun Butcher
-
Hey Outrider,
Those saddlebags are awsome! I've gott'a make me a set like that. Only, I think I want bear hide on mine. I think I would extend the flap so it runs all the way down the front, and yeah, maybe run the strap from the back rather than over the hide. Though, I like the way the strap is an accent over the calf hide. That is a mighty fine lookin' set of saddlebags though.
Maybe Kid Sheleens 'as got some bear hide hangin' around somewheres.
Will
-
Just finished this today, the lighting isnt all that great, Don
-
Nice, Don. Clean and simple. It makes a good no-nonsense rig. The maker's stamp adds to the overall effect. The sewn on buckle end with the narrowed billet end is a nice touch. I like it. Thanks for the pic.
-
Howdy Don
I agree with Marshall Will, nice clean lines, well done.
tEN wOLVES ;) :D ;D
-
Howdy Don,
Beautiful job! The clean and simple design of this rig give it an elegant look. Many thanks for sharing this with us.
-
Handsome rig, Don. Nice job.
-
Here's the left holster for my outlaw rig. It's a little lighter than I was expecting but it's a good color. The holster is a loose copy of one made for the mail order trade probably around 1890-1900. The rosettes are Will ghormley's small Frank James rosette, somewhat embellished to look more like the one on the original holster. The original had a roll stamp between the rosettes. I didn't have one so I used the side of a meander stamp I made years ago to give a similar appearance. This is probably the first stamp I ever made. A stitch marker down each side of the border stamp finished it off. The color is almost a day in the pecan dye. The next piece of my outlaw rig will be a bullet pouch.
-
Howdy Gents
Marshal Will, thats a great looking holster , and the color looks good too, an outlaw would have loved to have a holster like this one (LOL )
tEN wOLVES ;) :D ;D
-
Thanks, 10W.
an outlaw would have loved to have a holster like this one (LOL )
He'd have to steal it to make it correct, though. ;D
-
MW
That's a good lookin holster
WC
-
Kewel!! ::) ;D That is a really neat border. Should be in the gallery!! I sure do love coming to this thread and seeing all the exciting things that y'all post here! ;D
-
Beutiful holster Marshall W, like the Remington too. Like the border design also. Can't wait to see the full rig.
Don Nice holster also really like that belt style. Did you hand stich all those bullet loops?
Johnny Dingus
-
Howdy Pards
Your all putting out such nice leather work , my hats off to all of you , keep it coming, can't wait to see all this good stuff.
tEN wOLVES ;) :D ;D
-
Howdy Pards
Will I just finished a Johnny McCrea rifle butt cover, and I have to say Johnny's method is top notch, it's something that will last and last. the cover I made is for my 1874 Pedersoli Sharps Business Rifle, it came with a 14" trigger pull, and I have a 15 1/2" pull, so I added 1 1/2"'s of high density rubber cushion, which Ace Lunger help me out with also, which brought it to 15 1/2" in trigger pull, I used 8/9 ounce vegi-tan leather, and submerged it in my natural walnut dye for six days, then used some Lexoil to condition, then EVOO, and finally Skidmores Leather Cream, to finish it off , I hope you all like it, it fits me like a glove now, and at least after I have surgery, there will be a little spring in that butt in of the rifle to help me get out of a chair don't ya know. :D ;D 8)
tEN wOLVES :D ;D ;) ;D
-
SOME MORE PICTURES, and thanks again Johnny McCrea, I couldn't be happier Pard, and Ace thanks for the extra pad cushion, Pal it made the difference. 8)
tEN wOLVES :D ;D ;) 8)
-
Very nice work all 3 of you!!! Like the cleanliness Don. Very slick.
Love the border work and color MArshal.
Nice butt, 10W ;D. (You know what I mean.)
DM
-
Thanks pards. I appreciate the kind words.
Putting that border in the gallery is a good idea. Thanks for suggesting it. I'll have to take a good close-up of it for that.
10W, that butt cover is great. I like it. That's a good design of Johnny's for sure.
Dalton, we may have to keep an eye on you. ;D ;D ;D
-
Really nice! Did you find the pecan to be more to your liking than the walnut?
-
Thanks, Santee. I can't say the pecan was more to my liking, just another option for choosing a color. I like the richness of the natural dyes. It would depend on my mood as to which I liked better.
-
Howdy Gents ;D
Thanks Marshal Will for your comments , and Dalton you too, not real sure about your comment though.
Marshal, I think the pecan color came out real nice, and the border trim really adds a schnazzy look to it, you do very well when picking out your border tools.
I picked walnut for mine because I wanted the leather to blend in with the color of my walnut stock, which I think it did very well, thats another thing about using natural dyes , there natural and you can make them do nice things, and create wonderfull colors and shades. I need to cook up some of the pecans that Ace sent me, it's just been too hot here to be cooking in the house, and too hot to be out side, so as soon as it cools off I'll cook up a batch, I'm already thinking of things to use it on.
tEN wOLVES ;) :D ;D
-
Will and 10W:
Nice pieces, pards -- as usual.
Very attractive and tastefully done.
-
Howdy Fellows!!
Marshall Will, did youu let that holster sit in the sun? My Pecan is twice that dark? The only way I could get that light of pecan color would be to do a 6-8 hr, treatment and then pull it out! I was just wondering how you got it that light?? ???
TW, Anothe fine piece of art work from you!! I thank you for showing me those picks, so when I redo mine I know how I am going to do it!
later ACE
-
Marshal, I think the pecan color came out real nice, and the border trim really adds a schnazzy look to it, you do very well when picking out your border tools.
Thanks, TW.
Marshall Will, did youu let that holster sit in the sun? My Pecan is twice that dark? The only way I could get that light of pecan color would be to do a 6-8 hr, treatment and then pull it out! I was just wondering how you got it that light?? ???
It's a mystery to me, too. It was in the dye for 20 hours and then an hour in the sun. I like the color, but it sure wasn't what I expected. The test piece was way darker and it was only in the dye for 5 or 6 hours. There have been times when I couldn't get that color no matter what I did. Got two gallons of it, too. I'm stoked.
-
Beutiful holster Marshall W, like the Remington too. Like the border design also. Can't wait to see the full rig.
Don Nice holster also really like that belt style. Did you hand stich all those bullet loops?
Johnny Dingus
thanks guys yes Johnny the whole rig is hand stiched,
will as usual a fine holster and i love the color, Don
-
Howdy Marshall Will,
Beautiful job on your Remington Holster! Thats a great design and finish. I like the way you have integrated the stamps and borders. Excellent workmanship. Thank you for sharing this with us.
Howdy Ten Wolves,
Beautiful job on your Sharps Butt Cover! I love the finishes you put on your work. You did a good job of padding this cover and should feel very little recoil if any at all. Thank you for sharing this with us.
As I've said before, this forum is a tremendous resource for ideas, methods, inspiration and most important... Encouragement.
Many thanks to Marshall Will for a great job in moderating this forum.
-
Howdy Johnny McCrae :D ;D
Thanks for the kind words Pard, and thanks for sharing your rifle butt cover with us , this is what pushed me to give it a try, and I'm really happy I did,being able to add a sizable amount of cushion to the butt and have it stay firm and stable is a good trick, and this method did that ,and allowed me to get the 15 1/2" trigger pull I needed, I think this rifle stock cover will last a long time, and I can pass it down when I can no longer shoot, but that will be a really looooooooong time from now ( LOL ) ( imho ) ( LOL ) I HOPE , anyway I really like your method and I'll use it again on my other rifle stocks that need a longer trigger pull. 8) go to page 45 on Show your stuff to see Johnny's how to's.
Thanks again Pal :D ;D ;D
tEN wOLVES ;) :D ;D
-
MW, I have never seen it turn light like that! But I don't use the Sun, and mine allways gets darker after treatment! My treaments are not like a lot of what you pards do, my treatment is a bascisly like WG. does, not exaclty!
I am in shock :o :o, that is 10X lighter than my pecan, the color you got I would get with a dip and dunk! When did it change colors, during treatment, during the time it was in the sun?
MW, if you can give me any details , I would be great full, I want to firgure this out, and see how it could of done that? When you were treating it, I understand that there are ways different than I do, I think most of you guys treat the inside, and then do your sewing, and then you dye it. Where I case, stamp, treat the inside, when that is dry, I grind the outer edges and glue, after the glue has dryed, I sand the edges, adjust my stitch groover put on my back groove sew, and then dye it.
MW let me know, if get came out that color or when did get change?
thanks
ACE
-
Ace, that's what it looked like after an hour in the sun, rotating it so it wouldn't be dark on only one side. The parts that didn't get any sun, like right under the belt strap is really light. That's OK, I've never been able to get a good light brown like this. I'm happy with it. I would imagine your brew is stronger than mine. I thought about reducing it more, but I like this color anyway. Remember, this is a very different piece of leather than the scrap and it didn't take the dye as well.
-
:)Good Morining Pards!
MW, I cook all the pecans I can get in to my 2 small hands cuped toghter, put those in a 3lb coffee can and boil for 20-30 mins, then I turn the temp to 3 (7 being the highest) with a lid on and let cook 8 hours, turn it off, the next morning I wil have to add about 10oz of water and do it the same way! the next day it is done! Thank makes a 2 litle bottle full, i have used the same batch of pecans i started with, and i have 4 gallons! If I can help in any way, please feel free to ask!!! You guys have done so much for me, i will not and cannot every pay you all back!
ACE
-
Beautiful work Marshal Will! I love the border and the colors phenominal! I just aquired a Remington myself and I may borrow that holster design if you don't mind. Maybe a little different border using a small meander stamp with the rosette but still, I really like it! I've got a pecan tree in the backyard, guess I'll have to pay the neighbor kid to pick up some for me!
Here's my latest just finished this am for a friend of mine. Pics aren't too good but someday I'll spring for a better digital camera.
-
Kid, Nice looking Holsters. Can't quite see if they are carved or if it is the texture of the leather you used. Yeah camera's are a tool.
You guys have patience. I get one holster done and I want to post it most of you wait till you get all of them done and then post the set.
Johnny Dingus
-
Howdy Kid :o ::) ;D
Wow nice rig, this would be suitable as a BBQ Rig, Sunday go ta meeten in such, but really I like this style, it's got the BLING, without being gaudy, and pearl handled grips Pard this is the finishing touch, a pard can wear a rig like this just about with anything and look good. You did a nice job of carving also, the picture doesn't show it off like it should, but that could be because of it being black, darker colors never show off the tooling or carving like the lighter colors, but from what I can see it looks rich and classy. WELL DONE , and thanks letting us have look see. ::) :o :D ;D 8)
tEN wOLVES ;) :D ;D
-
AWESOME Rig Kid!
Realy looks good, i wished we all could learn how to post pic's like a lot of pards do, so we can see a pic picture!
i would of like to seen the stamping ect.
KS, still it is super1
Later ACE
-
Nice work, Kid. I like the black as a contrast to the spots. 10W summed it up nicely: it has bling. If you get a better camera, a nice close-up of one of those holsters would be nice. Thanks for posting the pics.
Beautiful work Marshal Will! I love the border and the colors phenominal! I just aquired a Remington myself and I may borrow that holster design if you don't mind. Maybe a little different border using a small meander stamp with the rosette but still, I really like it! I've got a pecan tree in the backyard, guess I'll have to pay the neighbor kid to pick up some for me!
Thanks. I'm honored that you like it enough to want to make something similar. Of course I don't mind you borrowing the design because I did just that myself. Page 95 in Packing Iron shows the holster that got me fired up in the first place. As to the color, remember to get the pecans with the hulls on them like Ace sent me.
-
Howdy Kid.
Beautiful job on that two gun rig! Eye catching and attractive! Your friend will be very proud to wear it. Many thanks for sharing this with us.
-
As to the color, remember to get the pecans with the hulls on them like Ace sent me.
[/quote]
I wonder if just the hulls would do? Does anybody know? I was walkin' the dog the other day and a squirrel decided he didn't like me under his pecan tree and started throwing hulls at me while I was waitin'. I have plenty of them! :D
Yeah, I REALLY need a better camera, 'cause you can't see the classic floral pattern carving and the true color is dark mahogany, almost black cherry colored. :)
-
I wonder if just the hulls would do? Does anybody know? I was walkin' the dog the other day and a squirrel decided he didn't like me under his pecan tree and started throwing hulls at me while I was waitin'. I have plenty of them! :D
I think it would probably work fine. For walnuts, you use just the hulls. They seem to have the highest concentration of pigment. For proof, just pick up a bunch of walnuts without gloves. :o
-
Thanks for the tip, Marshal. I know about the walnuts, we used to pick 'em when I was a yonker. Speaking of squirrels, did I ever tel you fellas 'bout the time I went squirrel huntin' with.........never mind. ;D
-
OK Amigos, I had never tried figure carving before so I thought I'd try it for a buscadero rig for the B-Western catagory in SASS. Here's the left side of the belt. I've been working on it off and on for about 6 weeks, in between other stuff. Any suggestions before I go too far? :)
-
Howdy Kid
Now that is very cool.
WC
-
Hello Kid DITTO what WC said, that is beautiful, can't wait to see it finished.
tEN wOLVES ;) :D ;D
-
That's great, Kid. Keep at it just like you are. No reason to change to anything else. I really like it with the eagle above the holster. Nice idea to do a little figure carving in with the floral design. Waiting to see the finished product for sure.
-
Remarkable. I love looking at precise pattern work, but Kid, this is a picture. I have no idea what it takes to do what you and others do; the craftsmanship is one thing, but the creativity is something else.
BP
-
KD, :o :o I cannot wait to see the whole thing done :) :)
That is some mitidy fine stamping you got going on there!
Thanks for sharing, and when you get er done get that babe on here for us to look at!
ACE
-
Beautiful work Kid.
Love the Eagle in there with the flowers. Neat to see the bullet loop layout without loops. Makes a new guy think about the building process.
Thanks for the post before it is done. Helps me learn.
Johnny Dingus
-
Yer right about that thinking the process thru Johnny. That is one of my biggest problems. Kid that carving looks great and thanks for posting the unfinished pics. Like JD said it is a real help.
-
Howdy All
It's kinda quite today, everyone must be hard at work making cool things.
Here are a few sheaths I've done in the past.
WC
-
Those are really fine. I particularly like the second one with all swivel knife work and one whack with a stamp. The stamp really accents the rest. Nice, graceful lines with that knifework, pard. I also like numbers 1, 3 and 4. ;D Thanks for the pics. Nice work.
-
Man, that's some mighty fine work, WC! I like the first one. A lot of different types of things well blended together. The flower at the bottom really sets it off and the meander is great. The maltese cross at the top is interesting. Is there a Hitler youth knife under there? :)
-
Those are really fine. I particularly like the second one with all swivel knife work and one whack with a stamp. The stamp really accents the rest. Nice, graceful lines with that knifework, pard. I also like numbers 1, 3 and 4. ;D Thanks for the pics. Nice work.
Howdy MW
Thank you.
The stamp at the bottom is not a stamp, it's carved.
WC
-
Man, that's some mighty fine work, WC! I like the first one. A lot of different types of things well blended together. The flower at the bottom really sets it off and the meander is great. The maltese cross at the top is interesting. Is there a Hitler youth knife under there? :)
Howdy Kid
Thank you.
When I make things for me they are advertising for my custom business so I do a lot of mixing of designs
that way I don't have to have as many things on the walls to show customers. I've got a ton as it is ;D
That cross snap cap came in just as I was finishing the sheath so I used it to show the bikers what it would
look like.
-
Very nifty! But I think I made a mistake and miscalled the snap. I believe thats called an iron cross, not a maltese. All the same, the shape of the sheath looked like the shape of the youth knife. Sorry 'bout that! And thats a great idea for your customers! :D
-
The stamp at the bottom is not a stamp, it's carved.
I was referring to the very center. It sure looks like a seeder or flower center at the center of it. Great work either way. I do like the look a lot. I may have to make a holster that way one of these days.
-
:)Howdy WC,
Those are AWESOME!! be realy hard to pick which one a person likes the best! Each one as a personality design of its own!!
When i started going down threw them , i would i like this one the best, and then, i like this one the best, and so on!
Those ar some super displays showning customers that if you want it, I can do it!
Thanks a bunch for sharing!!1
ACE
-
Howdy WC, beautiful work Pal ::) :o 8)
TW ;) :D ;D
-
Howdy Will
I thought you ment the whole thing like WG James stamps.
-
Howdy
I had made that sheath as a matched set with a holster. Someone bought the holster but didn't want the
knife and sheath.
WC
-
Nice set, WC, I'm surprised it wasn't bought as one. Well, there's no anticipating what the next guy will like or want sometimes. I like the style. Yeah, I thought there was a seeder in there. Thanks for the pics.
-
very nice finger cuts there WC yours is better than the holster you hade to match up for, Don
-
got these bird wings finished today they are based on J.S.Collins spur straps, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/Collins.jpg)
-
Howdy Don
That's a great lookin pair of straps.
The swivel cuts on the holster are mine too. The holster was already made when I decided to match it to the
sheath. I had used Skidmores for a finish on the holster and culd not get it wet enough t get any depth to
my carving.
WC
-
oh right thats why its lighter cuts still fingercuts ar not easy to do ive tried and gave up ill have to get me a filigre blade..LOL, Don
-
Hey, lookin' good, Don. I like those straps. Good color for that design. The mulefoot makes a nice border, too. Good work.
-
Howdy Kid,
Thats a beautiful job of carving! Can't wait to see the finished product One of my goals is to learn how to carve like that some day. Many thanks for sharing this with us
Howdy WC,
Your sheath's and holster set are very nice. Many thanks to you for sharing your work, idea's and knowledge with us
Howdy Don,
Great job of carving on your Bird wings! I really like the finish you put on them. Many thanks for sharing this with us
-
:)Hey Don, Those are some AWESOME spur straps, beatifull carving and color, everything about them seems flow toghter, perfect job. What did you use for dye?
Like Johnny said thanks for sharing!
ACE
-
Nice! What period are those? 1880-1890?
-
thaks guys,
yes Santee around that period i dont know the exact date this pair was made or bought by teddy though,
Ace the dye is a mix from fibings medium brown and three parts tandy pro dye saddle tan, and saddle oil, Don
-
WC nice sheaths and holster too. Like the matched set. Don't understand why the buyer did not want both.
Don Beautiful straps.
You guys are both fantastic leatherworkers.
Please continue to post your projects it gives us something to shoot at and hopefully we improve while trying.
Johnny Dingus
-
Alright, Compadres, I've been working my fingers to the bone all week to finish the eagle buscadero belt because it's a gift for my son who's coming home from college this weekend and I wanted to have it ready to give him for his B-day. Here's the pics! :)
-
Two more pics of the eagle belt. This B-day present comes complete with a pair of Uberti Polished stainless 1858 Remingtons with .45 Colt conversion cylinders and aged ivory grips.
-
Kid,
That is one nice looking rig. Your son will look pretty spiffy in that. Well done.....want to make me one??? ::) ;D
-
:PSure Outrider! If your waist size is less than 22 inches and you can wait for delivery until the Amazon freezes over or I catch another bear with a piece of liver, whichever comes first! ;D
-
Well, there, Kid. That is first rate. Great work. I like the color on it. Those S/S 58's are a good addition to it, too. Your son should really be stoked over that. What a cool gift.
-
22 inch waist i dont think i can remember that far back LOL ...nice rig though it has turned out realy nice, Don
-
Howdy Kid,
WHOLY SMOKES :o :o :o I can't imagine how much time you have in that rig!! That is a beatifull piece of art work!!
AWESOME in every WAY :) When I saw that it blowed me away! I have seen some AWESOME RIGS on here, but that is most carving on a rig that I have ever seen except for out of Packing Iron Book!!
I take my Hat off to you!!
I only have on small question, are you by anyway wanting to adopt another son?? I don't each much ::) :)
Thanks for showing us that AWESOME RIG, your son will be proud when he is at a shoot with that on!!
Later
ACE
-
Wow! Now that's a lot of work. Well done!
-
8) ::) :o 8) Well done Kid :D ;) ;D
tw ;) :D ;D
-
Howdy Kid,
Very Very Nice! Many thanks for sharing your work with all of us.
-
Howdy Pards,
I have again re-designed the western style 45 ACP holster. Instead of a recurve at the throat I have done an arc. So far this has been well received by the Wild Biunch shooters. But I wanted some input from my favorite critics ;D I have also finally found my "US" impression stamp an the next holster will have the cross strap with the "US" logo on it.
-
Very nice Outrider,
Liked the way the border is outlind by using dividers. Stamping looks even. The coloring is showing on my computer as a darkbrown with red highlights. If that is the true color it makes it look older kinda antique.
Johnny Dingus
-
That's a good looking holster, Outrider. I like the way you reflect the Arc on the strap at both ends. It makes for a nice, balanced holster. Good work, there. Be sure to post one with the US on it, when you make one. That would look great with a basket weave on it, too. Thanks for the pics.
-
Man Outrider. That's some sweet work. Outstanding! :D
By the by, I don't think I'll be doing anymore of that fancy stuff for a long time, but I'll send you the pattern and you can make one.
Ace, I don't have a problem feeding you, but are you potty trained? I don't think I could go through that again. ;D
-
Howdy Outyrider
Well done Pard , I like your use of the seeder on your border, I did this myself on my last holster , it just gives it a nice and a little different look, your pattern is also nice and looks to fit the 1911 real well, your finish is nice and rich and not overly shinny, good color too. 8)
tEN wOLVES ;) :D ;D
-
:) Outrider,
You I like that the best so far :) I know you and that won't be the last of them! great design and nice color!1
Thanks For sharing!!
ACE
-
Thanks for the compliments..I was basically looking for comments on the design and if any of you felt there were changes in order.
Johnny, the color is Feibings Mahogany dye.
In most cases I don't like real shiny finishes the seal coat is Tan Kote and I may put on one or two applications of neutral shoe polish to give it a little sheen.
Ace, your right about additional ones..I have already sold three of them and have two more on the work bench. At least now I have two versions that they can choose from. I am also working on versions without the cross strap and without a skirt. That way I can then offer six different configurations of the same basic holster.
-
Howdy Kid
That is a great lookin rig. Nice job.
WC
-
Howdy Outrider
That's a sharp lookin holster
WC
-
Howdy Outrider,
Another great job from your workshop! A well thought out design and beautiful looking finish. Many thanks for sharing your work with us.
-
... a gift for my son who's coming home from college this weekend and I wanted to have it ready to give him for his B-day.
What the heck you gonna make when he graduates? ;D
Was lookin' forward to seein' the finished project. Great work and gift.
BP
-
Howdy Pards,
I have again re-designed the western style 45 ACP holster. Instead of a recurve at the throat I have done an arc. So far this has been well received by the Wild Biunch shooters. But I wanted some input from my favorite critics ;D I have also finally found my "US" impression stamp an the next holster will have the cross strap with the "US" logo on it.
Well...that cinches it. I guess I am gonna have to get me one a them Colt 45 auto loadin' pistols. That is a real nice traditional holster fer a modern shootin' iron. Nice work neighbor!!!
Thumbs up,
X Horse Pen
-
Alright, Compadres, I've been working my fingers to the bone all week to finish the eagle buscadero belt because it's a gift for my son who's coming home from college this weekend and I wanted to have it ready to give him for his B-day. Here's the pics! :)
Hey Kid,
That is one fine piece a work. While yer makin' everbody else one I'll take mine with a bear sittin' in a van. ;D
Cheers,
X Horse Pen
-
got these bird wings finished today they are based on J.S.Collins spur straps, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/Collins.jpg)
Hi Don,
Those are fine lookin' straps. I don't even see anything wrong with 'em at all. Absolutely fine example of old timey spur straps. I tend to be a traditionalst myself. Dern nice!!!
I'll send ya my address just in case ya git tired of 'em. ;D ;D ;D
Keep the good stuff a comin',
X Horse Pen
-
finished this Olive Pattern today, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/OlivePattern.jpg)
-
Looks good, Don. Nice use of the olive skirt with that kind of a border design. Nice work, pard.
-
The Marshall is right on target. Fine piece a work Don!!!
X Horse Pen
-
finished this Olive Pattern today, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/OlivePattern.jpg)
Don, " Well Done for sure " beautiful work, I really like your borders and the use of the flower stamp.
tEN wOLVES ;) :D ;D
-
Howdt Don, i will have to agree with everything has been said, that is a beatufull holster, and love the layuout!
Later
ACE
-
Very very very nice Don!!! I love the use of the floral stamps, and the spots. DM
-
Nice job all around, Don.
-
Don,
Well done. I particularly like the color. Fantastic looking holster.
-
Howdy Pards,
As promised I have finally finished the western style .45 ACP holster...ala Wild Bunch. This one has the arc and as you can see has the "US" stamp on the cross strap. Coloring is oil with Bag Kote finish. Any critique is more than welcome
Hey Horse Pen...you better get yourself one of these 45's...fun to play with for sure.
-
Sorry about the pictures on the last post..I must have had the camera on a slight angle. the holster looks "squatty" I try better next time ;D
-
looks good, Outrider. The US works nicely on the strap. I like the double crease on the pouch to match to give it a little more for your eye to land on outside the strap area. The oil finish is a good choice, too. Thanks for the pics.
-
Howdy Don,
That is one elegant looking Holster! Beautiful finish! Just like something one would see on the pages of "Packing Iron". Many thanks for sharing this with us.
Howdy Outrider,
I was looking forward to seeing your US stamp. It looks great! Thats a neat and clean design along with excellent workmanship. Many thanks for sharing this with us.
-
Don, not much more to say except I agree with everybody. Beautiful work and nice color!
Outrider, If I come over to your place will you teach me how to do that? We are neighbors after all. Great work, as always!
-
Hey Kid,
That is one fine piece a work. While yer makin' everbody else one I'll take mine with a bear sittin' in a van. ;D
Cheers,
X Horse Pen
:D Horsepen, I been tryin' all day to get the bear to sit up in the van like he's drivin' so I can make a picture for a pattern for it, but he ain't co operatin'! How 'bout a wild boar? ;D
-
Kid,
Come on the doors open
-
Outrider, that looks very nice!! Who made the stamp? DM
-
Howdy Pards,
As promised I have finally finished the western style .45 ACP holster...ala Wild Bunch. This one has the arc and as you can see has the "US" stamp on the cross strap. Coloring is oil with Bag Kote finish. Any critique is more than welcome
Hey Horse Pen...you better get yourself one of these 45's...fun to play with for sure.
Love that Holster! I like the color contrast.
Where do you get the US stamp? I have looked all over for one of those for years...to no avail.
-
:)Outrider my Friend,
I knew you would come up with another 1911 holster! Looks real Clean and nice, and like everyone else, I like the US on it, realy Tricks it out!
Thanks for sharing ACE
-
Dalton,
I have had that "US" stamp for many years and don't remember where I got it. However I think that Weaver Leather sells both the "US" and the "CS" stamp under their reenactment hardware. Stock No. 65-3050 for the "US" stamp and 65-3051 for the "CS" stamp. At that time they were selling for $75.00 but have most likely gone up. Hope this helps
-
olive Nr 2 here are a couple of pics of the front back and side so you can see how i polish and burnish the edges and back, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/Olive2.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/OliveBack.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/Olive2side.jpg)
-
Well, Don. I like this one even better than the first. The double row border is nice. Good job of burnishing. I've never done the back. How does it work for CAS? I've always left it rough but that can change. I may have to try one to see how it is.
-
Don,
Beautiful work as always. Love it when we see the talent that you longtime leather workers share. :)
How heavy is the leather that you used? And how do you wet mold yours, any tricks?
Johnny Dingus
-
its roughly 8- 9 oz leather i dont normaly wet mold, but you can use low warm water soak the holster in it and wrap the gun in an oily plastic bag and let it dry naturally after you are finished molding, Don
-
Excellent job, Don.
First class IMHO.
-
Don,
What did you use to achieve that gorgeous color!?!?
-
Hey Ya'all,
After my hard drive crash, I've finally gotten my digital camera back on line. However, I can't reduce a photo size to post anything on this site. I'm such a computer dunce. I wanted to share a photo of the antique "Samuel Clements" style chair my wife Lauri got me for Father's Day. Since I spend much more time in this chair than I do in a saddle, I fugured I needed to give it some leather trim. So, I simulated a carved leather pattern from an 1880s saddle and applied it to the chair. I even gave it a small braided cantle role.
Since I can't post the photo at the size I took it at, I've put it on my photo page on my website.
http://www.willghormley-maker.com/Photos.html
There ya have it,
Will
-
MS the color is a 3-1 mix ... 1x fibings middle brown oil dye and and 3 x fibings saddle tan oil dye and when it is dry lightly rubed with leather conditioner,
@ will that chair has just turned out great, Don
-
Here's Will's chair......with help from one ole cowboy who is also an ex-geek.......
(http://www.willghormley-maker.com/Chair_op_450x600.jpg)
(http://www.willghormley-maker.com/Seat_op_800x600.jpg)
(http://www.willghormley-maker.com/GunOnChair_op_450x600.jpg)
-
Dang thats nice Will! I hope that fits in the box with my buckles by mistake!! DM
-
Hey Chuck,
Thanks for the tech help. I swear, I don't know how I survive in this century with as little as I understand about technology! Like the time I dropped my phone and it quit workin'. My wife drove me to the cell phone store to get a new one. Lauri asked the salesman if they could salvage the numbers out of the old phone and load 'em on the new phone. He said, "Maybe. Depends on how bad it's busted." He took the phone and looked at it for a second and handed it back to me. He said, "You don't need a new phone, this one's fine. You just need to learn how to turn it on." It was true. My wife had turned the phone on for me when she gave it to me and I had never turned it off. I just kept it plugged in when I wasn't usin' it. I had no idea the thing turned on and off.
Hey Don,
Those Olive holsters are awsome. The lines, the borders, the placement of the flower stamps...it is so simple yet so...elegant. Now I'm gonn'a have to try makin' me one. What long barreled gun do I have that needs another holster...? I think I'm gonn'a take one of my big stamps, like the Craftool F901, and re-tool it to make somethin' like your border pattern.
Will
-
That's truly a fine chair, Will. I like it a lot. That leatherwork adds so much to the chair. Thanks for sharing that outstanding piece with us. :D
-
@ Will ... it was a basket weave stamp X510S and i ground and filed the ends away, and the good looking rosets came from yourself as you know :) and im very pleased with i must add, so you could say you are now a world wide exporter of fine quality goods, Don
-
:o :o WG, What words can I say :o(AWESOME) I loved all the holsters, and the chair! i have went total brain dead ??? ::), the only other rig that I want to make is the spring type D.S. to show off my 51 US MARSHSALLS . And I havn't fiured out, how to keep them from flopping without running a strap around or down to my belt. I think that i will have to do the strap to my gun belt?
Anyone got any ideas??
ACE
-
Here's Will's chair......with help from one ole cowboy who is also an ex-geek.......
(http://www.willghormley-maker.com/Chair_op_450x600.jpg)
(http://www.willghormley-maker.com/Seat_op_800x600.jpg)
(http://www.willghormley-maker.com/GunOnChair_op_450x600.jpg)
Howdy Will,
That sure is a nice looking ride. I see you got those clip corner buckles in. Give me a note by PM or email either way.
Chuck, thanks for the picture work.
Take care,
X Horse Pen
-
Love that chair!
-
Hey Marshall,
I see yer back with thet same old wild rag on. ;D LOL!!! :-[
Watch out fer those prairie dog holes.... ;)
X Horse Pen
-
I see yer back with thet same old wild rag on. ;D LOL!!! :-[
Yeah, same old wild rag. I've had flour in sacks that looked that good. ;D I take it you're seeing pics fine, now?
-
Shucks Marshall, my bunch wears flour sacks under our hats with peekie boo holes cut in 'em. We wear 'em like a badge. ;) It's a secret so don't tell nobody. :D
Take care,
X Horse Pen
P.S. Yep, yer pictures are showing up fine now. Musta been a computer hiccup or something somewhere along the line. :-\
-
I call this a neo-Frontier style since the knife is a "modern" style made by Muela albeit a variation on a Bowie (I did age it though per the customer's request... ; )
(http://www.wrtcleather.com/1-ckd/1-2008/knife-sheath-Cales-muela2-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/knife-sheath-Cales-muela2-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/knife-sheath-Cales-muela2-3.jpg)
It's deer reawhide over a vegtan liner with a bit of scratching on the lower part, a few tacks and spots, some fringe, and a German Silver concho.......kind of "plain" for me... ;D
It's going bear hunting next month along with the owner's new C Sharps Arms M74 in 45-70.......
and Will G - you're welcome and you gave me a great laugh, that's one of the best low tech meets high tech stories I've heard! You're just an old Luddite cowhand I reckon - there are days I sure wish I was back living in my lodge without all the modern day trappings a feller puts up with today..........
-
Dang Chuck! That looks great like all your work. Nice job. I am sure that your customer will be ecstatic with that piece! DM
-
Another good one, Chuck. I like the way you finished out the back of the belt strap. It carries the look all the way around. Yep, you should have a happy customer with that one. :D
-
Lordy Chuck, you just never run out of beautiful pieces do you. If I could have antiqued things with the perfection that you do I would still be selling stuff to all of my old buckskinner pards instead of workin' for a livin'. GB
-
Chuck, SWEET!!!
I love your style, you pieces are so perfectly done, but they look so period correct. They look 150 years old, but brand new, it is like being in some sort of time warp! You take the simplest little thing and make it a AWESOME piece!
Thanks for sharing, i allway look forward to seeing you stuff!
ACE
-
Some FINE work going on here! Always a pleasure to see Chuck's work. Love it! :)
Will, I love the chair. Can you make me one on wheels so I can drag my fat disabled butt around the house? I'll trade you a bear hide thats lying around somewhere to put on those saddlebags you mentioned, if I can find which box I threw it in when my wife made me clean up the place. :D ;D
-
its an 1881 M 5 1/2 inch holster with the Nr 5 belt loop to fit the double row Krag web belt that was used by the rough riders, Don
-
you a lefty don 8)
-
Swordboy,
Most 19th century military holsters were carried "butt forward" on the right side. What you see is the correct design.
-
Looks great, Don. I like it a lot. The toe plug with the drain hole is a nice touch. Thanks for the pics.
-
You boys are making me slobber all over my key board like an ornery old bull.
Don, that's a fine lookin' piece a work. I got a couple I'll show ya as soon as the sun shines and I can get them shot.
Gray Wolf, I'll call ya. Dern that's too good fer words.
Hats off to ya both,
X Horse Pen
-
:) Real nice job Don,
Man that thing looks just like if it was issused yesterday!
Thanks For Sharing
ACE
-
Howdy Pards,
I have been trying to get a good design for a double mag pouch for the .45 ACP. Although this design was origianlly from Bianchi, I have changed it somewhat. I need some input into this so as to get some of the kinks out of it. If you notice there is no sewing or stitching...just two double rivets, two #24 line snaps, and a tension screw
-
This is the pouch before assembly
-
That looks like a good design, pard. I like the simplicity of the idea. That looks like it would match your WB holster nicely.
I notice that the tension screw looks like it goes through the whole item into a Chicago screw head. If so, wouldn't that tend to negate the use of the snaps? I'm assuming that the tabs get riveted together to become a divider. To be able to use the snaps, how about putting the screw between the tabs halfway down and under the back piece so you can unsnap the holder to put it on or take it off without removing your belt? If the screw head interferes with or would mark the belt, you could reverse it so the screw head is on the outside where it can be adjusted without removing the holder.
-
I belive the screw in the center is what seperates the 2 magazines.
the screw will also allow the user to tighten / loosen the pouch as per his/hers preference to how snug the pouch holds the magazines in place
-
I see what you are meaning Will. He could just use rivets instead of the snaps, due to the screw going all the way through.
Very nice and simple design, Outrider
-
Here is my latest item. A phone holster that I needed so that I would not trash another phone :-[. I still need a lot of practice but I'm lovun' every minute of it.
Wish I had a chance to take some of those classes youall talk about. I can sure see where they would help.
Well, maybe one of these days.
Let me know what you think, what I need to work on and so forth. GB
-
Marshal & Dalton,
I made a second one today and did away with the snaps. Dalton, we must have a mind meld..I thought about it last nite and decided that the snaps could just as well be rivets...so the second one has the rivets. Marshal...the tabs at the end fold over and are riveted thereby making a divider between the magazines. The tension screw is a 8-32 with a finishing washer and a 3/4" piece of plastic tubing for compression. Works out very nicely. I will post some more pics when I get a chance
-
Good work, GB. I like the checked design. Nice. Yeah, we'll keep you around. ;D Be sure to post pics of any new stuff.
Lookin' forward to more photos of your mag holder, Outrider. It'll be nice with rivets. Less bulky across the back that way. ;)
-
My first go at a real (non-toy) holster....the belt is on the table now. 8)
[Lost link deleted by moderator]
-
;D You got a real winner there Rayban. I like the color and the stamping looks great. If that is your first one I can't wait to see your 10th.
Keep it up man you got skills 8)
-
Very nice clean lines, even stitching. Looks good. Like the color! DM
-
Howdy Rayban,
You have done a beautiful job on your first Holster! Nice workmanship and I like the border treatment. Look forward to seeing the Belt. Many thanks for sharing this with us.
-
Very nice work, Rayban. I like the clean lines. Your workmanship is great. Like GB says, I'm looking forward to seeing more of your stuff. Thanks for the pic.
-
Howdy Rayban
Well done pard, very nice looking Cheyenne holster, and for being your first, like some of the others have said , I can't wait to see your work 6 months from now, I like the color, nice clean stitching, and very neatly done stamping, this would be a keeper for me. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Rayban, Every one has said what needs to be said, except; AWESOME JOB
ACE
-
Thank you all for your kind words of encouragement ;D I've been making mostly knife sheaths the last couple years, and found that making this holster was just as easy, once you got the proper pattern to size.
And i must say that visiting this forum and lurking a bit pushed me to run out to buy the Single Six so that I could make a holster for it....so again I thank you...and the wife REALLY thanks you ::)
[Lost link deleted by moderator]
(http://i211.photobucket.com/albums/bb277/RGleather/IMG_9094.jpg)
-
Howdy Rayban
Nice work.
I like your seams, nice and slick.
WC
-
Nice work, for sure. That's a good, clean way you make them. Thanks for posting the pics. Now will you have to go buy another pistol to have one for yourself? ;D Be sure to get another model so you can make a new pattern. Then post the pic here. ;)
-
Awesome work!
-
Newest set made for my pard, MT Brass for his R/M Conversions.
Color is Fiebings Dark Brown, with a topcoat of Skidmores.
-
Howdy DM
Good lookin set of holsters.
WC
-
Good work, Dalton. That border looks great with the dark brown. Bold without being over done. Thanks for sharing.
-
Beautiful DM...very inspirational to me too!! ;D
-
Here is a rig I made for Dennis Adler of Guns of the Old West magazine.
Hope you like it.
Ned
nedbuckshot@yahoo.com
-
:)Hey Pard,
I realy like that new set of holsters!! :o They are AWESOME and like was said above, just the right amount stamping and spots, give that set a nice over all flow!
I have one holster to finish and a knife sheath to make. And then I don'r know! Had a bunch of shots in my spine Monday, havn,t been out of the house since. I don't think they did any good so, I don't know how much i will be going to the shop, it turn cool here about like where you are, and the cold kills the back.
So It maybe a long winter, it came about 3 weeks earlier this year than it did last year!
Super nice set of Holsters, Pard!!!!
Later
ACE
Ned, AWESOME Rig, I love the color, nice styling! Question, are those cylinder holder's on the belt? They sure look nice!
Thanks for sharing !
ACE
-
Howdy Ace, yes they are, the rig is a very close copy to what Clint Eastwood used in "Pale Rider" except for the keeper over the cylinders. VERY time consuming to make, there are 8 differant parts to just that section alone! :o I stayed busy for over a year after the article came out just building more rigs like it!
Here is another design for an RM conversion that I did for Walt Kirst of Kirst converter fame.
Ned
nedbuckshot@yahoo.com
-
Nice work, Ned. Those rigs really look good. I like the narrow belt on the first one, it really portrays the beginning of the cartridge era. That cylinder holder is nice with the cap over the cylinders. Fastening it at the top is good, too. You won't be fighting the retainers while changing them. The money belt is a nice look on the second one. You don't see dark money belts often for some reason. I like the look. Good work on both rigs, they're beautiful. Thanks for sharing them with us. Looking forward to seeing more of you around here. Welcome to the forum.
-
:)Ned I have to agree totaly with MW1 I realy like both rigs, and have made patters for my 51Navy US Marshalls. and I was going for a gun fighter look, so that a lot of those purdy guns showed, also thought that the cyclinder holders just set the rig off!
I was going to use a wide Belt because I thought that I might put 45-70 bullet loops! I HATE making bullet loops! Is there anyway I could get you to shoot a pic of the last belt, I know it is a money belt, which I am not going to do, but i wanted to look over the way youdid your loops!i have even thought about buying 1/8th" spots and use 2-3 in between each bullet! Everytime I try to sew loops, they look bad!
Keep up that nice work!
ACE
-
Howdy Ace.
The cartridge loops are laced through slots punched in the belt, that way I only have to stitch or rivet the ends!
While not very common there are examples of originals done that way plus in doing so you can tighten the loops after they stretch out and they all do I don't care what is done!
Ned
-
Thanks Marshall! ;D
That's the best thing about doing custom leather; seeing (or hearing) the end users look on thier face and saying wow that's even better than I had hoped for!
The cylinder carrier was a struggle, I worked on it for months till I came up with the final design that you see. It was so successfull I had it patented.
Now here's another one I built for Dennis Adler.
Ned
-
Howdy Gents
Dalton, you are really developing a great style, your use of of border stamps and colors is rich and pleasing, I have a lot of brass spots laying around, I just might use them next, I like your placement of them they look good. 8) Oh yea, Dalton I really like your wood pile, it's a nice way to photo your work, great back ground. 8) ::) :D
Newbuckshot
Nice Work pard, like Marshal said, the use of the narrow belt really tells of the period it was made for, very nice work all around, the color has depth and beautiful tone, adding the cylinder holders make it compleat, Clint would have been proud to wear this rig. :o 8)
And by the way welcome to the Leather Forum Pard :D
tEN wOLVES ;) :D ;D
-
Rayban love the cheyenne holster and the color is just great,
DM and Ned nice rigs alround, dito to what everyone above has posted, Don
-
Thank You All for the nice welcome and comments. ;D
I will try and help out and share the knowledge I have gained over the years, I feel like I'm home now.
Ned
-
Thanks Ned, I had told a good friend of mine how bad I hated doing bullet loops and he told me that a lot of people do it that way. So I guess the next time I will give it a try!
Thanks
ACE
-
Thanks Don...I'll have the belt posted real soon..... ;D
-
Nice to see some newcomers and great work all! I had a wee bout of pneumonia and was in the hospital for a few days and missed posting for a while. :P But I'm better now! :D
Here's a rig I made for myself because I wanted a black one to match my new outfit.
And here's the purse Gunbutcher sent to me to make for my wife for our 27th anniversary. She gets all kinds of comments on it everywhere she goes. Thanks Gunbutcher, she loves it! :D
-
Nice work, Kid. I like the border design on the rig. It works well in black. It makes a good look. The purse is fine work, too. I can see why she gets compliments. Glad to hear you're on the mend. Good to see you back in action. Thanks for sharing.
-
Howdy Kid
Beautiful rig pard, I think your border tooling really looks nice, is this a dark brown, or black, either way it stands out, very classy looking, and your placement of conchos adds a nice touch. Thanks for sharing. ::) :o 8) I'm happy to hear your feeling better, that stuff can really bring you down. That was really nice of Gunbutcher, to give you that purse to make for your wife, you did a great job, and I'm sure she loves it.
Take good care of yourself Pard
tEN wOLVES ;) :D ;D
-
Kid,. as usual the holsters are great. and the purse is exactly what I had hoped to see. If I had another one I would send it to you also. Glad the better half likes it.
Hey, stop gettin' sick pard they tell me there is no future in it ;)
Seriously, good to hear you are doing better. We need you around here to tell Horsepen a bear story once in a while.
Gun Butcher
-
Bear stories? That perked my ears right up!!! ;D
All you boys have been real busy...looks ta me. The weather is such that when I have the time to shoot pictures, it's rainin'.
When it's sunny out I don't wanna shoot pictures I just wanna go shootin' pistols. ;D
No posts from me in awhile because of that. I am still here a listenin and a watchin'. Keep up the good work!!!
Hats off to the Ladies, too!!! ;) :-* :-[
X Horse Pen
-
Howdy to Dalton, Ned & the Kid,
My hat's off to you guys for the beautiful projects you have posted. Your work is inspiring and a genuine pleasure to look at. Many thanks for sharing your talents with us
-
Got the belt finished up..... ;D
[Lost link deleted by moderator]
(http://i211.photobucket.com/albums/bb277/RGleather/IMG_9678.jpg)
-
Howdy Rayban
Judging by your resent work, I'd say you were deffenitly ready to step up to the real deal, although if I was still a kid, I'd still want you making holsters for me and the boys, ( LOL ), all kidding aside , you are very good at this, the holster your belt, will all I can say is their Beautiful, and this is a job WELL DONE. ::) :o 8)
Can't wait to see your next project ::)
tEN wOLVES ;) :D ;D
-
Realy, nice work Kid, nice and clean, and the carving on the Purse, keep up the good work! Thanks for sharning!
Rayban, real clean 1800's bordering , and A nice distressed look on the holster!
Thanks for sharing!
ace
-
Howdy Rayban,
Ten Wolves & Ace hit the nail on the head and expressed my sentiments exactly. That is one fine rig! Many thanks for showing us the completed project. Can't wait to see your future work!
-
Howdy All
Well I finished another piece to the set. I've been working on this set for awhile now in between
customer orders.
I stamped the lefthand at the fair a couple weeks ago. Just got it sewn the other day.
Now all I have to do is make the belt and I will have a matching set of holsters, belt cuffs and spur straps.
WC
-
Howdy WC
Your Holsters came out beautiful to say the least, I love that Barry King border stamp, let me know when you get some more in, I've got to have one of them, I really like the way you change direction with this tool, and your checkering is spot on perfect, are you going to put your makers stamp on the the right holster, or just be different and leave it at that, I know you used Skidmores as your final finish, I'm getting so I can tell the difference, I use Skidmores as my final finish all the time now, it's makes a beautiful and natural looking finish, not to mention the conditioning and protection it gives you, are you going to make your belt with or without bullet loops? or is it going to just be for your cap & balls six shooters? anyway WELL DONE PAL, YOU MAKE ME PROUD. :D ;D
tEN wOLVES ;) :D ;D
-
good job on the belt, Rayban. I really like that border on that rig. Nice stitching. The decorative clip corner buckle is a nice touch.
Wow, WC. You've done it again. I think I may need one of those stamps, too. Ya better get a handful of them in. ;D You reallly make that border right by reversing the direction. I like the fine cross-hatching, too. Did you do that with a swivel knife? It really looks good. Beautiful work.
-
Howdy TW & MW
Thank you for the kind words.
I didn't have my makers stamp when I made the other holster so I'll leave it alone.
I don't think I'll put loops since it's for my C&P's. I think I'll carve the Texas Ranger Star and do the
checkering to match the rest. The checkering is done free hand with a swivel knife.
The boarders stamp is not from Barry King, it's from Hidecrafter.
WC
-
Good morning WC,
Thank you for posting another fine work of art from your workshop. I do look forward to seeing the entire set when you complete it.
-
WC, one word describes your work, WOW! I'll say it backwards, WOW! I'm glad Will asked how you did the crosshatching. I've not seen that done before, it really looks sharp, and eunique. Thanks for sharing it, JD
-
:)Good Mornin Pards,
WC, AWESOME pair of holsters!!! I love the way you took the basket weave, and blendened it with the other stamps, as the flow is perfectly match with the design of the holsters style. i make a lot of comments, and my comments are how i seem the project! I am no artist abilitly, but I do know what I like and see!
And since I can't carve I have to work extremly hard to mate up the stamps and style to make a rig look like it belongs in the period, instead of , just a bunch of stamps thrown on a piece of leather!
Thaks so much for sharing and inspiring pards like me>
Ace
-
The latest addition to my Plinkin Rig....the bullet pouch.....lots of room for improvement in this piece, but it will hold up well till I git r done over. ;D
[Lost link deleted by moderator]
-
Very nice Rayban!! I like the look. DM
-
Rayban, it looks great Pard, I'm sure you'll get some good use out of it. 8)
tEN wOLVES ;) :D ;D
-
That's a fine match for the rig. I particularly like the molded pouch. It works nicely. I've done a lot of molded leather in the years past. It always has a nice appearance. Good job.
-
WC,
That there is some mighty find strait line swivel knife work!!! And I do like the stamp you used to make the checkering affect all flow so nicley toghter!
I want to thank you for Sharing!!
ACE
-
WC i also like that border tool it looks great,
Rayban you have done a great job on that rig too, the pouch looks just great they arnt all that easy to do did you use a block mold? Don
well here is what ive just churned out well thats western that is, Don
-
Those are really clean, Don. What an elegant border. Fine work, thanks for sharing.
-
Don, I love that border stamping on your spur straps...I don't think Tandy carries that tool, right?
Yes, I cut out a block of wood to use to mold my pouch....next time I have to remember to rub something on it to atract it easier! I hear parafin works (Al Stohlman trick), so gotta git me some. 8)
-
Very nice, Don. Super clean and PC looking.
-
Thanks for sharing Don. The Detail and finish are outstanding. I would be interested in what you did to obtain that color and quality of finish. Dog gone impressive! JD
-
thanks all, the push beader i made myself and the roller is from Mcmillan, the color is fibings saddle tan and fibings medium brown oil dye mix 2-1, Don
-
Howdy Don
Beautiful work Don, your tooling looks great, it has that classy look to it, I also like the color, thanks for letting us take a look ::) :o 8)
tEN wOLVES ;) :D ;D
-
Real nice set a dove wings, Don. That's my favorite style a spur straps too.
Retracting blocks from leather items: Try making your blocks in two or three pieces instead of one. Make it one and then cut the middle piece to angle bigger at the top. Semi-wedge shaped like the old hat blocks. After the leather is dry and tight on the block just pull the center section out and yer done. The other two pieces on either side of center will just fall out.
I hope this works for ya,
Horse Pen
-
Howdy Don
Those are good lookin spur straps.
WC
-
Got r done now...... ;D
(http://i211.photobucket.com/albums/bb277/RGleather/IMG_9815.jpg)
-
That makes a good rig, Rayban. I really like the tonal variations in the finish. The whole thing has a richness to it and all the pieces work nicely together. Thanks for sharing.
-
Thanks Marshall....but I have to admit, that tonal variation is by accident but it's fine with me.....gives it an earthy look... ::)
My pet peeve of the year is that when Tandy sold Pro Dye dyes, I didn't get that....now I'm using Feibings and I get it no matter what color I use....cept for USMC black....
And if I try to smooth out the variations by applying another hit of dye, the color gets darker, way off what it is supposed to be.
In other words.....Feibings TAN is no where close to what Pro Dye TAN used to be......but yet I understand Feibings made Pro Dye...
totally confused here......think I'll just shut up and live with it.... 8)
-
Beautiful rig Rayban, , you also did a nice job on the meander stamp on the belt and the color looks great, like MW said, your extras match your rig real well. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Howdy Don & Rayban,
That is some mighty fine work you Pards have posted. Excellent workmanship and design! Many thanks for sharing this with us.
-
Howdy Pards,
I just finished this 2 3/4" wide belt for a fellow shooter. I am not sure I care for the color. It is a mixture of Fiebings Cherry Stain and neatsfoot oil. I put on two applications of the cherry then did three coats of EVOO, then sealed it with Tan Kote. The buckle is one of Will Ghormleys latest clip corner in White Bronze. Maybe it is just me I really don't care for that much reddish color. By the way he will most probably wear this belt with his Scottish Kilt outfit.
-
looks good to me Outrider, the color is different but I think it looks nice, sometimes it just takes getting used to, you did a really neat job of this belt, just as you do with all your work.
tEN wOLVES ;) :D ;D
-
Wonderful, rich color, Rayban. Outrider, that color is great, and really shows off the buckle nicely.
-
:)Don, Real elegant border work on those spurs straps!
Outrider I like the belt, I love the Buckle, I think you are right, to much Red in there for me.
thanks for sharing guys!
ACE
-
Nice belt, Outrider. That buckle really looks good on it. Although the color is fine, I'd think another coat of dye would make it look a little richer. Can you pop the buckle off and dunk it? Even more important, what does the guy who is getting it think? He may like it just like it is.
-
Howdy Pards,
I just finished this 2 3/4" wide belt for a fellow shooter. I am not sure I care for the color. It is a mixture of Fiebings Cherry Stain and neatsfoot oil. I put on two applications of the cherry then did three coats of EVOO, then sealed it with Tan Kote. The buckle is one of Will Ghormleys latest clip corner in White Bronze. Maybe it is just me I really don't care for that much reddish color. By the way he will most probably wear this belt with his Scottish Kilt outfit.
What colors are in the pleads? The red may work out just fine.
-
I agree with HP. The red may make the plaid in his kilt show off better. or vice-versa. I like it. And the buckle's nice too. :D
Nice work Don and Rayban. Can't say anything hasn't already been said. :)
-
Howdy the Camp,
Well, the fellow who ordered the belt was very pleased with the color....so I guess my question is moot at this point. ::) I appreciate the input from you guys...means alot ;D
-
Attached are pictures of a non CAS Holster I made for a friend's Beretta.
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0856.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0858.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0860.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Holsters/100_0861.jpg
This was my first use of Skidmore's for the final finish. I like the result and it is easy to work with. Many thanks to Ten Wolves for his advice on this product.
-
Johnny,
Nicely done pard. I will have to try that "Skidmores"
-
Well done Johnny, I think both holsters came out great, and I,m happy to hear you like the Skidmores Leather Cream as a finish. ;D
tEN wOLVES ;) :D ;D
-
Nice work, Johnny. Looks reallly good. Thanks for the pics.
-
Very smooth looking. Nice job! DM
-
Howdy Pards,
Many thanks for the kind words. I would not have been able to do the Leatherworking I do without the encouragement and help from the good people on this forum!
-
Johnny, very nice! I like that type of holster for that type of gun.....did you use black dye or did you vigaroon it??
Also, where can I learn more about Skidmores...I keep seeing it pop up in more posts lately...
Thanks! ;D
-
I found my Skidmores at a Corral West western store in the boot polish area. Its good stuff. DM
-
Howdy Rayban,
I used Feibing's Black Professional Oil Dye for the color. I could not find Skidmore's locally so I ordered it online. Their website is http://www.skidmores.com/. I just started using Skidmore's so I'm not an authority on it but I'm sure some of the other Pard's will be more than happy to give you more information about using it.
-
:)Howdy Johnny,
That is a mighty fine looking holster that you made!!! Now he will go show his friends and they will be knocking down your door, saying you made xxxx one, what didn;t you make me one!
Real nice holster, been thinking of making me one like that for my Officers model Colt!
Great job and thanks for sharing!
ACE
-
(http://i118.photobucket.com/albums/o112/Don101_photos/a4601da2.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/ca8858fd.jpg)
-
Very nice work, Don. The attention to detail is impressive. Can I ask what tool you used to make the outline, besides the flower stamp? The stitching is really exceptional, as is the finish.
Thanks for sharing the pictures, JD
-
Looks Great Don!! Very elegant with its less is more approach! Nice job! DM
-
Howdy Don,
Very very nice! That is some excellent workmanship! Dalton hit the nail on the head... Elegant with less!
What was the method you used to finish this holster?
Many thanks for sharing this with us
-
Hello Don
Well done Pard, nice clean lines and a rich color. ::) 8)
tEN wOLVES ;) :D ;D
-
That's great, Don. I love the color. It really sets off the flowing lines. Very graceful. Thanks for the pics.
-
Hey Dalton, as far as Don 101's holster goes, I have ta disagree with ya.
I may be splittin' frog hairs here but I think it is simply elegante!!! ;D :D
Okay, I'll shut up, :-[
Horse Pen ;)
-
Very nice work, Don. The attention to detail is impressive. Can I ask what tool you used to make the outline, besides the flower stamp? The stitching is really exceptional, as is the finish.
Thanks for sharing the pictures, JD
it is a roler patern of dots, Don
-
Don,
What can I add to what the others have said...very well done my friend. Primo
-
Exceptional work!
-
:)howdy Don,
I love that holster, it just strikes me as a holster that a real cowboy went to the general Store and ask the clerk where he kept his better grade of holsters, and of course they allways kept them put up, so someone couldn't walk off with a high quaility holster,Then the cowboy would pick the holster that worked the best for him and his peice!! i see so much AWESOME stamped, carved, ect., that leave you in aw, but as your holster show's it isn't the just get by holster, it is a holster made of great quialty with the great edge work, the perfect stiching and a AWESOME Boarder Design.
Don thanks for sharing, every time someone show there stuff, i get a free education!!
Your friend
ACE
-
Very nice, Don. Clean, period, fine craftsmanship.
Good job.
-
Here are some pictures of a Cartridge Belt I just finished for my Sharps. It holds (25) .45-70 cartridge’s.
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0878.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0879.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0880.jpg
-
Howdy Johnny,
Great looking belt!! Best look for solid ground to trod when ya have that belt full and the Sharps in yer hand! ;D ::) ;D
-
Great looking belt Johnny...what material are the loops made of?? I think I've seen that in Packin Iron (?)
-
Nice belt and nice sharps, the last pic made me smile, are the loops webing from an old sling or somthing like that ? Don
-
Howdy Johnny ;D 8)
Your belt came out great Pard, I mean it looks supper, I'm going to be needing to make one for my ownself , and that wanted poster hot digity. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Howdy Boys,
Many thanks for the kind words.
The webbing I used is very similar to the web belts we wore in the Army with our uniforms. I bought this stuff from a local Army surplus store and it comes in roll form. There also is a company that sells white webbing on the internet and their link is http://jas-townsend.com/index.php?cPath=29 I prefer the Army surplus store webbing because it's a bit heavier and the color seemed just about right.
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0893.jpg
-
That's definitely a fine belt, Johnny. Highly impressive. The cotton webbing really works nicely on it. How did you sew the ends so it didn't stick out to fray?
I also love the resume. Cool.
-
Howdy Marshall,
Enclosed are a few pictures of how I installed the webbing. This belt is made of two ply’s of 4-5 oz. Leather glued together with Barge. The webbing is sandwiched in between the two ply’s. Actually there is no sewing done on the webbing.
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0891.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0890.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0887.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0894.jpg
-
Thanks, Johnny. That makes for a nice looking belt. I'll have to play with that idea some. Nice work.
-
Howdy Marshall,
Thanks for the kind words. I replaced the last picture with one that shows the back of the belt (lining side) a little better.
-
Here are some pictures of a Cartridge Belt I just finished for my Sharps. It holds (25) .45-70 cartridge’s.
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0878.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0879.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/Leather/100_0880.jpg
Are you a southpaw?
-
Naw. I'm a righty.
-
:)Johny, That is AWESOME belt, now I got to make me one! Looks great, and i like the web coloring!! You did a great job!!
kept it up! And thanks for sharing to all!!
ACE
-
Reason I asked is the tongue on the left, buckle on the right.
-
Reason I asked is the tongue on the left, buckle on the right.
Howdy Forty Rod
Your looking at the belt upside down... ??? ::) :o :D ;D
tEN wOLVES ;) :D ;D
-
Good looking belt, Johnny. Nice job.
-
Forty....you're very observatory ;D!!
-
Howdy Forty Rod,
I kinda figured that's why you asked. You have a good eye for detail. The cartridge loops are in the center of the belt so the buckle can be turned either way. Even though I've been wearing a belt since first grade, I could not remember which way I place a buckle and actually had to look. Now that's a real senior moment!
-
thats a great looking belt.
never would've used webbing for the bullet loops.
i have allways been told on belts that the buckle goes on the left for men/boys. buckle goes on right side for ladies/girls
not sure if thats true but thats how i make my belts.
-
thats a great looking belt.
never would've used webbing for the bullet loops.
i have allways been told on belts that the buckle goes on the left for men/boys. buckle goes on right side for ladies/girls
not sure if thats true but thats how i make my belts.
Howdy Knucklehead :D
The difference between the buckle being on the right or the left, is just an option for righty's & lefty's, I'm a lefty, and I've always worn the buckle on the right for my gun belt and left for my pant belt, go figure. ??? ::) :P :-X :o
tEN wOLVES ;) :D ;D
-
And the cartridge belt in question works either way by switching the side that you insert the rounds into!
-
Howdy Dr. Bob :D
That's right Dr. Bob, it makes the belt real versatile, you can go either way, righty or lefty ::) 8) ;D
tEN wOLVES ;) :D ;D
By the way , how ya doin Dr. Bob ??? :D
-
If you're still confused you could alternate the cartridges..up, down, up, down, up, down...all the way around.
Naw, too confusing. ;D
-
hOWDY tEN wOLVES,
I'm doing fine. The antique mall where I have a small both is in the process of moving and I have been real busy the past 3 weeks with that. Helped hang peg board for the booths, painted my booth, packed and moved by stuff and am setting up for the opening this Saturday. Still been dancing some, but run out of gas pretty quick. Going to volunteer tonight at the National WWI Museum, and then again tomorrow afternoon. Other than that, been taking it easy! ::) :o ::) ;D
-
I made these and have only got to use them in a match 1 time. That was the 1st Sat in Nov "07. Been in bad physical shape ever since then. Texas Toby
-
Welcome Toby!! Those look pretty good!! Hope your gettin better, and can go use them again!! DM
-
Welcome, Toby. That looks like a fine rig. Did you re-inforce the back of the holsters to hold the top out slightly or is that just the way they're lying? Either way, you did a good job. The laced strap gives them a nice look. Thanks for sharing. Here's hoping you'll get back out on the range soon.
-
Howdy Toby,
Welcome to the Leather Shop. That's a real nice rig you made there. Hope you will be able to shoot again soon.
-
Howdy Toby
Ditto what Johnny said, good to have you here in the Leather Shop ;D
tEN wOLVES ;) :D ;D
-
Howdy Toby. All I can say is Ditto...Ditto...Ditto as all the others have commented. Welcome to the Leather Shop...good bunch of pards on this forum..couldn't ask for better.
-
Toby, add my best wishes to you being able to use that rig again soon. It is a perfect example of less is better. Very simple , very clean lines and the natural finish make it very elegant IMHO.
Here are my two latest projects, stock covers for both of my long guns and a wrap of soft tanned buffalo hide for the 92. I used a lot of the suggestions that you pards gave me and I like the way they turned out, although I did learn some new lessons on fitting butt stock covers ::)
Gun Butcher
OOPS, guess it would be better if'n I remembered the picture :-[
-
GB, Those butt covers look really fine. It's not as easy as some people think to get on of those covers correct. On some rifles the stocks have curves that are not that visible to the eye until you try and contour a cover. I'll throw up some pictures of mine maybe tomorrow. What make is your 92?...I use a Rossi 92 as my main battle rifle. never had a hiccop with that thing in the 12 years that I have had it.
-
Howdy Gun Butcher
Nice work on the butt covers and lever wrap, they should last you a long time. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Outrider and Ten Wolves thankee fer the kind words. I cut those covers way to big the first time but I was sure glad I did, had to cut 2 more times to get them right.
The 92 is also a Rossi. It started out as my brush gun( It's a 44 mag) but when I got into cass it was a good way to save a few bucks and after a little butchering she works slick as a whistle with nerry a stumble.
Gun Butcher
-
Howdy GB,
You did a great job on your Butt Covers! They fit your guns perfectly. Many thanks for sharing this with us.
Nice to hear the positive comments on the Rossi 1892's as I've just ordered an EMF Hartford Carbine in .44-40
-
TB, Welcome :) :)
Very nice looking rig!! I not much I can say that hasn't allready been said! I know where you are coming from on the medical condition!!
GB, Great looking Butt Stock Covers!!! I am going to make one for my Rolling Block, if I ever get the Rifle done, and I hope I do a better job sewing the end piece on this one, than I did for my Sharps, but My Mentor gave me some tips that I think ewill help a lot!
Later Pards
ACE
-
Nice butt covers, GB. I like long ones that protect the stock from the hammers of your pistols. I put a steel shotgun-style buttstock on my '73 and had to make a cover to hide the mis-matched wood (I don't like those crescent-style stocks they put on the rifles these days). I put a matching one on my shotgun, too.
-
Thanks Marshall Will, you are the reason mine are long. I was paying attention to your other posts about Butt covers. The recoil on the 92, even tho it's a 44 mag, was never to bad, now with the butt pad it ain't even there.
-
Johnny,
I just found a used EMF Hartford saddle ring carbine at the shoot yesterday. it's about 98% with the exception of two dings in the stock near the butt (what Marshal was talkijng about with the pistol hammers) this is an extremely clean gun...and the cost was just where I wanted it at $300.00...It feels as though the action has been honed...at least a spring kit...so I won't have to do this one.
My main rifle is a 14 year old Rossi 24" rifle with the half octogon barrel...they were not made for long. I have never had a mechanical failure with this gun..the only time I had problems is when it got dirty in the magazine tube.
GB here is some pictures of my butt stock covers...All of my rifles and shotguns have this cover with my initials. Have sold several varients of this cover
-
Howdy Outrider,
That's a pretty nifty looking Butt Cover you've made there. As with all of your work... Excellent workmanship!
Thanks for your input on the 1892's. Sounds like you got a real good buy on the Carbine.
-
Dern, I always seem to be in the wrong place for one of them deals Outrider. You made a fine catch on that carbine,and like Johnnie said your workmanship is always top drawer. I really like the tooled circles with the silver inital. GB
-
:)Outrider my Old Pal, that is just mighty fine looking butt cover :) Won't be long before I will be trying another one for my Rolling Block, i finialy got feeling good enough to go fit the but stock! Now comes the hard part, working out the shape! I got a lot of looking and thinking, I pretty well got the shape in mind, but I want to make sure.
Outrider thanks for sharing with us!
later Ace
-
Looks good, Outrider. The basketweave with the silver concho is striking. Good job. 8)
-
Outrider, Ditto to the other comments, especially Will's, with the intital work. Those appear to be the best fitting stock covers I've ever seen. I'm still messin around tryin to fit my first one, and yours is an inspiration. Thanks for the pics, JD
-
JD,
I made the templates for the covers by taping paper to the stock...making sure everything was square and lined up...then made heavier templates once I was happy with the fit....also if you sew the end piece on you have to make allowences for the seam...I usually give each piece about 1/8 " added material to account for the seam.
Most stocks are not as unifrom as they appear...case in point is the Winchester carbine stock which has a slight dip at the rear most part near the top of the stock. You are dealing with several angles...
-
Howdy Outrider :D
Beautiful stock covers, you make yours the same way I do, I use the brown utility paper that comes in large rolls , you can get at building centers, once I've made my pattern and I'm happy with it, I make a better template out of poster paper, I think the thickness is just right for transfers to my leather. Doing it this way makes easy work of making any pattern, and when your done you have a pattern template you can use over and over again, CowboyWC thought me this and it works great.Thats a nice touch with the medallion, with the concho, it gives it Character.
tEN wOLVES ;) :D ;D
-
Thanks Ten Wolves.
One thing I have found is that the stocks on Marlins are not always the same...I made a pattern for a 94 CB then when I went to make one for another gun...guess what it didn't fit...so watch the Marlins...I have made patterns for most all the SASS guns including the Sharps rifles, 85 Hi-Walls, and even the T-Bolts...and have not had any problems with fitting numerous stocks with the original patterns. When someone asks me to make a cover for a Marlin, I always ask for the gun so that I can make sure it will fit. Also, be aware of the rifles with the recoil pads on them...patterns have to be a little larger.
-
Wouldn't you know I have a Marlin! 1894 Cowboy Limited in 38/357, 20" octogon barrell. I bought it before talking to any of my (now) local pards. I bought it new in May, and it just made it's second return trip to Marlin. Hopefully they can make it cycle right this time. I know some people don't have Marlin problems, I'm just not one of them. When I get it back I'll take a stab at a butt cover, following your guidelines.
Many thanks, JD
-
JD,
Sorry to hear you have had problems with the Marlin...unusual I think. I have a 1894 Cowboy Limited in .45 Colt, and also a 336 Cowboy in 38-55. Both are fine rifles...never had a problem with them. When the 1894 Cowboy Limited first came out I started saving my money for one....then I went to a regional shoot in WV and low and behold they had a drawing for one for $5.00...I won it... :o ;D ;D
-
Well Outrider, that's the way to acquire a rifle!
When I first started looking for firearms, I did a lot of reading. I have to say Captain Geore Baylor's writings influenced me quite a bit. Once I bought the Marlin, then I started to hear about problems from other shooters. I met several guys who started out with Marlins, then moved on to Uberti 66's or 73s'
It seems, from my limited experience the Marlin problem is mostly limited to the 38/357. The other calibers don't seem to have the same cycling problems.
I've read on the SASS net that many guys have Marlins in 38/357 and never have any problems, and I'm glad to hear that. We have a couple of guys who have them here in Oregon, and haven't had a bit of trouble either. We also have a half dozen who've had nothing but trouble.
I do appreciate all the great info I'm receiving here, thanks a lot! JD
-
JD,
As you know the difference between the 66's / 73's and the Winchester 92's and Marlins is that the 66 and 73 have elevator type carriers and put the cartridge in a direct line with the chamber. The 92's and Marlins use a carrier ramp which feed the cartridges at an angle. These timeless designs were not intended for the type of cycling that we put them through. So sometimes you run into a cycling problem with the ramp type carriers....although I must admit that my main battle rifle is a 92 and I can really pump that thing with no problems. Again, because of it's smaller diameter the 38/357 also have to contend with lateral movement within the carrier area. If the cartiridge is perfectly lined up laterally you have a problem. IMO
-
You've described the situation very well. The first time I sent it back to Marlin they replaced the carrier. It worked out for a while, but not great. I've had other, way more experienced shooters use it as well, in case I was the problem, but it messes up with them too, usually right off the bat. We've tried different bullet shapes, and it does with 38's or 357's. After a couple hundred rounds, it's back to it's original tricks. Even a slow levering produces a problem. The cartridge won't go in like it should.
Marlin's had it about three weeks now. It took a month the first time, so I've probably got a little wait yet. One friend with the same type of rifle sent his back to Marlin five times before it finally started cycling correctly. SInce that time he bought a 73. The Marlen was traded to a gunsmith pard who has it working pretty good as his back up. He shots a Uberti Yellow Boy in 38, what a slick shooter.
A good friend who's currently not shooting loaned me his Uberti 73 while my Marlin is away. It is really nice. I've used it in three matches, and it's been flawless.
Thanks again.
-
JD, When your rifle jams..what part of the cartridge is hanging up is it the bullet itself or the case? Alot of the .38/.357 rifles only like certain ammo. I have found on the 92's that if the .38 is loaded to an overall length of 1.550 it cycles fine. shorter than that you start running into problems.
-
OK, pards. Remember to keep on track with this thread. Stay with the butt covers. ;D You may want to switch to pm's for this discussion. Thanks.
-
Howdy JD
I'm getting ready to make a butt cover for mine, I just have to design a tooling pattern for it.
WC
P.S.
Mine jams also and has from day one.
-
Sorry Will, I started this mess, so I'll move it to the PM line. Thanks, JD
-
Howdy Pards,
First of all I hope each and every one of you and your families had a good Thanksgiving. Christmas is just around the corner. Every year my shooting club.."Ocoee Rangers" has a Christmas shoot followed by a little get together at a local restaurant. We have yearly awards for best shooters in each respective class and also door prizes. I usually donate a door prize and this year I made up a set of arm cuffs with the "Ocoee Ranger" brand. With the exception of the "D" our brand is similar to that used in Red River. Since, the Ocoee River is but a few miles away.
Anyway here is some pics of the cuff's
-
What a fine idea for an award. Nice cuffs, pard. Thanks for the photos and the outstanding concept.
-
Howdy Outrider ;) :D
They look great Pard, that red R came out super, and makes a nice contrast with the rest of the cuff, I take it these are for you ?, if so you'll be style-in, ??? ::) :o 8)
tEN wOLVES ;) :D ;D
-
Ten Wolves,
Actually they are not for me. They are to be given away at our club x-mas party. I donate something every year.
-
I like the brand your club has. We have a badge but no brand. The brand concept is good.
-
Ten Wolves,
Actually they are not for me. They are to be given away at our club x-mas party. I donate something every year.
Howdy Outrider :D ;)
Will I'd say who ever gets these ropping cuffs is going to be dang happy, Sounds like a fun club, and thats a nice thing to do Outrider, I'm sure they all appreciate you a bunch. :D
tEN wOLVES ;) :D ;D
-
:)Outrider, Out standing job!! I hate to ask, but what weight of leather did you use? Some day i am going to make me a pair out of veg tanned leather, instead of that chromed tanned i used the first time!! I realy like they way you designed them!!
Thanks for sharing!!
ace
-
Ace,
I used 8-9z and lined it with suede. The pattern is from Will's cuff pattern pack. The red "R" design is our lubs brand.
-
Hi Outrider,
I was thinkin' the R R stood for "Red Ryder". :-[Just kiddin'!! ;D
My gals are watchin' Christmas Story with their girl friends tonight.
Nice lookin' pair of cuffs. Good work and thanks for showin' 'em off to us.
Horse Pen
-
Howdy Outrider,
Excellent job on the Cuff's! Very neat design! That is a great idea for a door prize. I would assume that one size would pretty much fit everyone. Many thanks for sharing this with us.
-
If I would not have got carried away and put the Bighorn Sheep on this lever action scabbard, it might pass for old time gun leather. ;) ;D At least it hal Wills stamp on it.
Regards Buff
[Lost link deleted by moderator]
-
WOW! Thats an impressive bit of work! I havent even attempted such a critter yet, but am hoping to someday. Very nice work. DM
-
:)Hoedy Buffalo,
That is a might fine peice of leather work. Great job!! I am have allways admire realy well designed saddle! And you have a keeper there! Thanks for sharing that with us>
ACE
-
Lookin' good, Buff. I like the way the scabbard blends in with the saddle colors. The air brushed (looks like, anyway) dark border works with the dark seat. The meander ties both together as well. Really nice work. Thanks for the pics.
-
Howdy Buffalo ::) :o 8) ;D
Nice, you did a really great job on this, and could give Roy and Gene a run for there money, I like the color and the way you did the sunburst on it, it's a nice affect, and your meander came out well too. ;D
tEN wOLVES ;) :D ;D
-
Buffalo, That is one fine piece of work and the color is great . I really like the cantle bag, you don't see those to often.
-
Gawd that's gorgeous.
-
I'm still learning the site functions. Here is my first pistol belt. The product of a lazy day.
OK, I have to learn how to attach better quality pics.
Lefty.
-
Nice looking belt Lefty, nice meander tooling and great stiching, I which My first belt looked that good :o
ACE
-
Hey Lefty, that looks like some nice work. I'm working on my first belt now, and I hope it turns out that nice. Thanks for sharing the pic, JD
-
Buffalo:
Very nice, indeed. A fine job.
Lefty:
Looks like a great start. Keep after it.
-
Good looking belt, Lefty. Nice work on the border stamping and stitching. Thanks for sharing. Welcome to the forum. Looking forward to seeing more of your work.
-
(http://www.wrtcleather.com/1-ckd/1-2008/osage-spanish-trade-knife-3.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/osage-spanish-trade-knife-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2008/osage-spanish-trade-knife-1.jpg)
I took a "busman's holiday" for Thanksgiving and built the sheath for this SW style trade knife that's been hanging around the shop. Unlike most of my knives which are collaborations (I don't/can't forge blades much these days with a bad neck and back) the entire package was made by me. This style knife and sheath can be documented as early as circa 1800 so would be appropriate for the 1807-1840's fur trade era or the later 1860-1880's Indian Wars period or any period in between.
The knife has a 7 3/4" hand made blade. The blade is thin like the originals and was converted to this style from a circa 1900 extra large Old Hickory blade. The birdshead grip is Osage Orange with a cast pewter bolster and a buffalo rawhide wrap - all with an aged finish. OAL is 12 1/2".
The aged sheath, inspired by a couple of originals, is made of harness leather with a brain/smoke tan beaded cuff and fringe. Decoration includes period glass beads, brass tacks and beads, and tin cone tinklers. The sheath is pretty neat since it can be worn in several positions including left or right hand crossdraw in the front or in the middle of the back as seen so often in A. J Miller's prints of the mountain men.
hope ya'll enjoy the look see.........
PS I "apologize" for not offering up kudos for the really fine work so often posted here - between injuries, illness, and spending as much time as possible filling my orders I don't get much "play" time........So here's a BIG two thumbs up to the rest of ya'll ;D ;D ;D
-
Lefty,
First off...welcome to the forum. A very fine job indeed on your belt. Looking forward to seeing more.
Chuck, as always your work is superb....
-
Ditto what Outrider said. Many thanks for sharing your work with us.
-
Well, Chuck. I think I like this knife better than any of the others you have showed us so far. I really find it a good look. As always the sheath is appropriate and impressive. Thanks for the pics. I may have to drool some more over that knife. Better still, I may have to make one. 8)
-
I like that style of knife, Chuck. With the sheath, they compliment each other well.
-
Glad ya'll enjoyed the look see - I'm pounding away on more goodies so better get back to the shop
Well, Chuck. Better still, I may have to make one.
Or let's make a deal ;) ;D ;) it is available.....
-
Outstanding, Chuck, as always.
-
Beautiful Chuck really nice work thanks for sharing Pard
-
Or let's make a deal ;) ;D ;) it is available.....
Thanks for the offer but I'm one of those guys who likes to make things. This would be a fun project. I've been meaning to make a good knife one of these days so something like this may be a good excuse. It would be a challenge to make one as nice as yours, for sure.
-
Attached are pictures of a set of Saddlebags I just finished for a fellow shooter. These are made from pre-finished Chap leather that I bought from our local Tandy store. This set was sewn inside out. This leather was pliable enough to be able to turn the bag right side out “dry”. The holster and flap are two-ply to add some stiffness and body. I would estimate that the leather used here is around 5-6 oz. I hand sewed this set. Again I used small welding clamps to hold the pieces together while sewing the gusset.
I have two more sets in process. On these I’m using unfinished 7-8 oz. cowhide for all of the parts except the gusset which is around 5 oz. leather. Since this leather is stiffer, I may have to turn these bags right side out “wet”. I have a local shoemaker who is sewing the front and back panels to the gusset for me on these sets.
http://i278.photobucket.com/albums/kk81/jvsaffran/saddlebags/100_0970.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/saddlebags/100_0971.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/saddlebags/100_0973.jpg
http://i278.photobucket.com/albums/kk81/jvsaffran/saddlebags/000_0936.jpg
-
Hey Johnny, that's really nice work. The whole thing looks great. Sewing is the hardest thing I'm dealing with at this point. I have clamps like that, but it seems like they would get in the way of the stitching. For a "green guy" like me, could you explain a little more how you use those clamps? Thanks very much, JD
-
Go for it Marshall Will...I started dabbling in it about a year ago...let me warn ya...it's addictive...here's one I'm working on now....
If I can do it, anybody can!! ;D
[Lost link deleted by moderator]
-
Johnny, nice job on a very cool idea. I take it this type of rig is very useful among you shootists??
-
Good work, Johnny. Those really look nice. I like the rich color on them. Welding clamps seem like a good idea. I may have to rob my toolbox and give them a try. Thanks for the pics.
Cool knife, Rayban. Be sure to post a picture of it when it's done.
-
Howdy Johnny
Great looking bags pard, and a really good idea, they look like they were done professionaly, WELL DONE.. ::) 8)
Hello Rayban
Looks like you have knife a in the makings, I made one last year and enjoyed the process, it's fun to see it all come together, I look forward to seeing the finished knife. :D
tEN wOLVES ;) ;D
-
Johnny, those came out real nice. Did you have to dye the leather or was it that rich color to begin with?
-
Howdy Boys,
Many thanks for all of your kind words.
JD, I sent you a PM on the use of clamps and stitching.
Santee, This was pre-finished leather that I bought from my local Tandy store. I was lazy this time.
-
Howdy, Haven't been on this site in awhile and this is my first post in the leather shop. Just finished this project I used the Will Ghormley pattern for Cheyenne Holsters.
-
Wiley,
That's a mighty fine looking rig that you made there!! Thanks for sharing it with us.
-
Mr. Wiley,
Those turned out real nice. Thanks for showing us your leather work.
Horse Pen
-
Wiley, thats a great looking rig, that anyone could be proud of creating. I really like the color. How did you come up with that if you don't mind me asking.
Gun Butcher
-
Howdy Wily
Nice work, your rig looks good pard, I bet it looks even better when you wear it, WELL DONE ::) 8)
tEN wOLVES ;) :D ;D
-
Howdy, Wiley. Welcome to the forum. That's some nice leather. Good design, well executed. I like the dark brown, it gives them character. Thanks for the pics. Looking forward to seeing more of your posts.
-
Nice carving there, Wiley!
-
Thanks for all the nice words Pards I l really appreciate it, look forward to being more active in this forum. Gun Butcher the color is chocolate brown it is a Tandy dye however it is not one of the new water base dyes they have now, I still need to try one of those.
-
Wiley AWESOME set of holsters, That Is a nice looking Rig!!
Thanks for sharing for all to see!
ACE
-
Thanks Wiley, 'll have to stop by my local tandy store and see if he has any of the old dyes left. I liked them better than the new ones I have tried, course it could be that I haven't worked out just exactly how to use them for best effect.
-
I'll have to stop by my local tandy store and see if he has any of the old dyes left.
I've had the best luck at long established shoe repair shops. I recently scored a large bottle of old Fiebings russet that way. Just ask if they have any of the old stock lying around that isn't moving. You'll pay full retail but the dye will be much better.
-
Howdy Wiley,
Very nice job on that two gun rig! You will enjoy this forum. Its a great source of information and inspiration. Many thanks for sharing your work with us.
-
Here's a couple of recent projects:
1) A pair of spur straps for a customer; and
2) Another holster variation for a S&W No. 3 breaktop.
-
Howdy Dave :D
Beautiful work Dave, I've always admired your stamping or tooling, you have a really nice way of putting things together, and when I'm doing my own tooling I always keep your style in mind, it's very classy, and something you wouldn't get tired of, your dyeing and finish are also top notch. Thanks for sharing, and just in case we don't talk in the near future, Merry CHRISTMAS and a Happy New Year. :D ;D
tEN wOLVES ;) ;D
MERRY CHRISTMAS MERRY CHRISTMAS MERRY CHRISTMAS MERRY CHRISTMAS
-
Howdy Dave...very nice indeed..as always ;D
-
Fine work, Dave. I like the coins on the straps. They really add to the look. The stitching on the holster looks great. I don't think of using stitching for decoration because...well, uh... oh, I don't have a machine. Yeah, that's it. Now I can justify getting one. ;D
Thanks for sharing.
-
Howdy Dave,
Ten Wolves, Outrider and Marshal Will hit the nail on the head with their comments. You did a beautiful job on the Holster and Spur straps. Many thanks for sharing your talents with us.
-
Thanks, fellas. Much obliged. Haven't posted much recently...been runnin' kinda ragged.
10 Wolves: Merry Christmas yourself there, pard. And to all the rest of the board.
Marshal Will: FWIW, that's my first time decorating with stitching and it's done by hand as I don't have a machine, either. So now you have even less of an excuse... ;) Stitched it first time with a light-colored contrasting thread but thought it looked kinda gaudy so I pulled it all out (a real PITA) and restitched with a black thread on the cordovan/brown blend holster. I like it better I think.
-
Looks reall good Dave!!! I like the dark stitching on that holster. I have to echo 10Wolves sentiments on your border work. They are always top notch, and beautiful.
DM
-
Irish Dave
The first thought that came to mind when I looked at your holster and spur straps was "very classy" what a really nice balance between decorative and subdued very nicely done, The decorative hand stiching is outstanding, thanks for sharing.
-
I'll agree with all that has been said, Dave. Superb job on the stamping!
-
...that's my first time decorating with stitching and it's done by hand as I don't have a machine, either. So now you have even less of an excuse... ;)
Well, I'll have to think about that, then. You're right about the dark thread looking nice with the dark color. Thanks.
-
Thanks guys, you're very kind.
And coming from this talented bunch, it's even more meaningful.
-
:)Howdy Pards,
Sorry I havn't been on much! Lot's of things that i didn't need to bother you all with! I will try to catch up! Dave, very pecissice and elangant design on your spurs starps, very perfection at it best! Great color, flowing design work with the perfert stamping and the nice conohs.
very nice stitch work on your holster, also very complimentory stamping! But I exept no less from you.
Keep the form rolling, for I havn't been working on anything! have a complete rig all cut, one holstered stamped, 1/3 of the belt stamped, the other holster cut out, just havn't felt like sitting down and working on it, and also trying to get my R.R.B. 45-70 finished!
Dave thanks for sharing for all of us to see!
It won't be long before TW will be kicking it in high gear, and doing some stuff, he is getting stronger everyday, and i know he is ready to get to making something.
It takes you Pros, showning us rookies the awesome work you do, and then giving all of us help and couarge to jump and try something new.
Keep it coming guys!
Devoted but slow, Rookie!
ACE
-
Irish Dave. Dadgum you! I think I'm doing a good piece of work and then you go and post that. You dratted confoundigan you!
And yes that's a word. I done wrote it in my Funk and Wagnall's myself! ;D
Anyway, I thought I'd finally get brave enough and show some of my playing around on here.
Hope ya'll find it interesting, and be gentle, I'm not particularly perfect yet, but gettin' closer by hairs every day!
(http://forums.horsecity.com/uploads/1227417474/gallery_20846_510_104923.jpg)
(http://forums.horsecity.com/uploads/1227417474/gallery_20846_510_40541.jpg)
(http://forums.horsecity.com/uploads/1227417474/gallery_20846_510_85359.jpg)
(http://wa1.images.onesite.com/members.horsecity.com/user/rollingthunder/spurs/large/dscf3399.jpg)
(http://forums.horsecity.com/uploads/1229907509/gallery_20846_598_83679.jpg)
(http://forums.horsecity.com/uploads/1229907509/gallery_20846_598_3996.jpg)
Be gentle now ... heheheh.
-
RT,
That's mighty fine looking work!! Ya don't need to worry about posting good looking leather like that!! ;D I really like the roping cuffs!! Primo!! ;D ;D ;D
-
Thanks very much Dr. Bob. Anyone ever tell you that you look a lot like Gene Hackman?
-
Seriously nice stamp work there.
-
Thanks Santee. I dunno about nice. But there's a lot of Stamping in there. I'm not really good at carving (still working on it), so I'm sorta left with stamping as my only real strength when I want to do something that's a little fancier. So on those cuffs, I wanted to do something that would resemble lace. When I first did it, I absolutely hated it, but just kept building on it, and it kinda turned out OK.
The finish was a long time coming. I alternated a light coating of EVOO, a light coating of Carnauba Creme, a light coating of Pure Neatsfoot Oil, a light coating of EVOO, a light coating of Carnauba Creme, a light coating of Pure Neatsfoot Oil, a light coating of EVOO, a light coating of Carnauba Creme, a light coating of Pure Neatsfoot Oil ... well you get the idea. Then I stained them with antique brown transparent stain, then hit them with a coat of Super Shene, then a light coating of Carnauba Wax, then a light coat of Super Shene, then a light coat of Carnauba Creme.
All to see if I could get that built-up look of leather that's been rode hard, put up wet, and rode hard some more.
Dunno if I succeeded, but I sure learned something along the way.
And that would be that there would have to be a lot easier way to achieve that end. ::)
-
;D RT beautiful work Pard ::) :o 8)
tEN wOLVES ;) :D ;D
-
Great stuff, RT. You don't need "gentle". Your work is first rate. All the straps and the cuffs are very nice work. Each one had a little something I liked better than on the others. I really would be hard pressed to tell which one I liked better. Thanks for the pics.
-
Howdy Rolling Thunder,
Well if that's "playing around" I'd sure like to see what you can do when you get down to business!
Seriously, those are beautiful designs and excellent workmanship! We look forward to seeing more of your work. Many thanks for sharing this with us.
-
Thanks much pards, I appreciate the encouragement ... I still have lots to learn, as like I said, tooling and carving is a real weak point for me. But I'm practicing as much as I can. Keeps me out from in front of the computer, which makes the War Department happy here on the homefront.
I'm probably gonna have to be real frugal as to how I go about affording this hobby, though. Just got hit with a pay freeze and a pay cut before Christmas. But hey, I still have a job. For that I am grateful. Just gotta figure out a way to make up what got cut.
I hear circus clowns are in demand ... ;D
-
Let me echo Johhny's comment: If that's playing around, I can't wait to see your serious stuff! I especially like the "Frog Skin" look on those spur straps, but everything is outstanding. I've been practicing stamping and spot setting, and I see I still have a long ways to go before posting anything here. Thanks for sharing your inspiring work, JD
-
Hey JD ... if I can post here, anyone can post here! Throw up some pitchers, pard!
-
Yep JD. Go ahead and post them pictures of yer stuff on here. None of us can laugh at yers without first laughing at our own. ;D
Real nice billfold, Marshall. Lucky Seven,eh? I can't remember which set my folks got me started on. It had all kinds a projects in it though. After that Dad would come home with a side at a time or sometimes a shoulder but he kept me in carving/tooling leather for quite a spell. Fond memories came back with that billfold ya made.
Thanks for showing us,
Horse Pen
-
Howdy RT
Yu got nothin to hang your head about around here. Your work is very good. I really like the
straps and cuffs.
Keep up the good work.
WC
-
I split the posts on making tools off so we wouldn't hijack this thread.
You can find it here (http://www.cascity.com/forumhall/index.php?topic=23781.0)
-
Man, that is great looking leather crafting there Rolling Thunder!! Very impressive. If you were playing around you won't ever have to get real serious about it. Thanks for sharing when is your next lesson? Sign me up.
-
Gorsh Wiley! Ya'll are gonna make me blush!
Actually, the next lesson I'll be involved in is over at the tool making post, learning how to recycle old bolts to make my own custom tools. LOL. And Marshall Will is the professor. :D
-
Alright fellas ... so here is a question for you. Do you think it would be a bit uppity of me as a newby leatherworker to have a maker's mark?
Here's what I designed. The design around the edges sorta represents the stamping that I do better with than tooling.
Thoughts? I'd sure appreciate any advice.
-
Looks like a fine stamp to me! I think if you are making something and are proud of it, heck yeah, put your stamp on it! You going to Grayghost graphics for the stamp?
I have made a few I want to take my stamp off of, but they never leave the house, lol ;)
DM
-
That's a good stamp design. Go for it.
Here's our thread for where to get one made: http://www.cascity.com/forumhall/index.php/topic,13978.0.html (http://www.cascity.com/forumhall/index.php/topic,13978.0.html)
Be sure to post it on the Maker's Stamp thread when you have it. http://www.cascity.com/forumhall/index.php/topic,18288.0.html (http://www.cascity.com/forumhall/index.php/topic,18288.0.html)
-
I should have known that ya'll would have had the hook up on those! Much obliged!
-
Nice looking design, but you don't "Qualify" as a newbie in my book. Not with the work you've posted!
-
Thanks JD ... BTW, I really like the line in your signature! Vert true!
Oh ... and where is your stuff friend? CMon! I showed ... so you gots to as well!
-
Even if your not a professional and only give your stuff as gifts to family and friends, that's all I have ever done, they seem to really appreciate the makers stamp. So get a stamp. I bought mine from Hide Crafters.
-
The truth is I haven't made anything! I'm practicing stamping and carving. I cut out several holsters, but this time of year is very busy for pastors, and I haven't had time to glue/sew them up, just to see if they actually fit my Vaqueros! I'm hoping after the first I will have a little time to try some things out! JD
-
Well show us the work in progress as it goes along. I for one would love to see it! Maybe even start a thread with a progression of how they come together?
-
Rolling Thunder:
Sorry about bein' so tardy....
That's work to be proud of in my book. Very unique and interesting style and nicely executed.
Keep it comin' pard.
-
Heck Dave, you're not tardy. You're fashionably late.
At least, that's what the War Department says it's called.
OK. So I'm not wanting to hog up the thread or anything, but here's the lastest I'm working on. The other one will have the basketweave going the opposite direction, and the matting on the right side has yet to be done, and the spots have yet to be added. The circle will have either the fronts of the Morgan dollar on it, instead of the backs or a leather concho with a bloodknot holding it on. This leather is really heavy 15 oz. skirting leather, and these are more of an experiment with the heavier leathers for me. I picked up two large similarly colored scraps at Tandy. Worked out pretty good. I like the scraps for that.
So that's my work in progress, now let's all tell our friendly parson pard that we want to see HIS work in progress! Hehehee.
Padre! Padre! Padre! Padre! Padre! Padre! Padre!
Come on everyone, join in ...
Padre! Padre! Padre! Padre! Padre! ...
-
Rolling Thunder, that is quite decorative already! Cant wait for the finished shot. Your work looks very good btw, if I didnt say so earlier. DM
-
Howdy RT,
That is a beautiful design! You sure do a great job of stamping! As Dalton said.. Can't wait to see the finished piece.
By the way, this is a good idea to show work in it's various stages. I believe one can learn a lot by seeing how a job progresses from one step to another.
-
Looking good already, Rt. I like it. I think we're all going to enjoy seeing that progress. ;)
-
RT, you are a ringer for sure! Either that or you are a "Natural" via the Redford movie. I will find something to take a picture of and post it today. Can you tell me what method you are using to set your spots? So far mine aren't looking too hot. I have the Tandy 8114 setter, and the two prong device, but the legs keep sticking out. Thanks!
-
I used to set my spots by slitting a hole with an X-acto knife, but then I stated to use a small single-hole punch. Takes a little practice to get the hang of the spacing from one prong to the other, but it works better than a spot setter kit from Tandy, and the little 1/4 inch spots are a breeze. Although you will still need the anvil to curl the prongs in and flatten them. I couldn't afford a spot setter press. I usually have my dished out part set up as well as a mini-anvil. I punch the wholes, put the spot in, tap the prongs curled in, and then flatten it on the anvil flat.
I also ordered that Maker's Mark from Phillips Engraving today. I'll let you guys know how it turns out.
And I can't wait to see your progress, there JD! Post away!
-
On my spots, I use a single slit punch to punch the holes for the legs, my 2 dividers to get the spacing correct, and then bend each prong over by hand using an old damaged nail set. Then I give it a final punch in the rear, to set both prongs down into the dome part of the leather. Works good, but takes time.
DM
-
Howdy Gents :D
RT beautiful work pard, it just gets better every time you post. ;D ;D 8)
I wanted to share with you boys, some Sheaths I made for some Bowie knives I gave as gifts for friends of mine, hope you like them.
tEN wOLVES :D ;D
-
Those are just flat gorgeous. I don't have the words, Ten Wolves! Bravo!
-
Those are great, 10W. The two-piece construction with the tip/hilt re-enforcments should last forever. Well done.
-
;D Thanks RT and Will, these Bowie's have a very thick tang, so I ran a welt on the top of the sheath and a small welt right at the guard on the bottom, it worked out well and these Bowie's slip in and out with no problem, glad you pards like them, they were fun to make. ;D
tEN wOLVES ;) :D ;D
-
Howdy Ten Wolves,
Outstanding! Those sheath's are a very well thought out design coupled with excellent workmanship. It's great to see you back in the saddle again. Many thanks for sharing this with us ;)
-
Good night nurse those are beautiful Ten Wolves, the design is great and the workmanship and coloring are outstanding. Thanks for sharing pard!
-
:D ;D Thanks Johnny & Wily, for your kind words I appreciate it, this was a fun project for me. :D
tEN wOLVES ;D
-
OK, here's a couple of things I've been messing with. The two oak leaf carvings side by side were just for practice, and to try some staining. I used Tandy's Eco-FLo Gel Antique. The tan looks more yellow orange, and the mahogany has a strong purple tint. Frankly I wouldn't use either one on a holster or belt. It's only redeeming quality is ease of use.
I've not decided what to do with this holster yet. Even though I have several Will G & Jim Simmons pattersn, I used my Vaquero and made my own pattern. I think I want to do a little more, either stamping, some lines, or even a little carving, but not sure what to do yet. I haven't decided if I'm going to line this or not. Probably not, because I think it will be too tight.
I'm not at all happy with the stamping, but a guy has to start somewhere! JD
-
Padre, I have no idea what you're talking about. That carving looks better than the crap mine turns out to be most of the time, and your stamping looks perdy even from where I sit. If that's for a Mexican Loop, I would put a smaller two-slot concho above and below, backed by a leather one and tied in with a bloodknot, then on the loop I'd do the same thing with a larger matching concho, and put two larger spots on the right and left of it. The important thing here is that you've set yourself up with a good amount of negative space in your design, which helps to show off the quality of the leather you're working with and allows the color to stand out nicely, which is similar to what I was going for in the area at the top of those cuffs where there were only spots and those Morgan Dollar coins.
I think you definitely are on the right track here. Very tastefully crafted work here! Can't wait to see more.
-
Heck, JD. I think you did fine on that stamping. The only thing I might suggest is to crowd those stamps together so they touch if you want a slightly different look. That border looks clean just the way it is, though. I like it. Now put your maker's stamp on it and sew it up. :D
The tooling of the oak leaves is good, too. Keep at it. You're doing really well. It's all a matter of practice. Remember, no one I know is ever totally satisfied with their work. There's always something that they'd improve on although no one would ever notice what it was. Just keep going and making those little improvements. Good job, pard.
-
DANG JD!
:D :D :D
you are way too hard on yourself. I am new to this as well and to hear you talk you'd think you are terrible.
far from it my friend, far from it. ;)
-
Thanks guys, I appreciate the feedback. It's not a double loop, I'm not a real fan of those. I know they are more period correct, but I'm aiming for a more conventional look.
Will thanks for the comment on the stamping. That's the kind of stuff I need to hear. Same with you RT. I have thought about conchos, but didn't want to try too much at first. I don't know what a blood knot is, and the way my spot setting is, I need more practice before putting them on something I want to keep.
Once again, thanks for the comments, JD
-
Howdy JD,
Justino is right. You are way too hard on yourself. That looks like real good workmanship on your holster and a nice, neat job of stamping.
I have yet to learn how to carve. If my first attempts at carving look as good as yours, I'd be be very happy.
Many thanks for sharing this with us. We look forward to seeing the finished product.
-
Thanks Johnny, that means a lot coming from you. Both you and Will have been a big help, answering my many questions. JD
-
(http://i34.photobucket.com/albums/d133/lennowenoxie/P8110084.jpg)
JD, here are some holsters with a bleed knot in the middle of the leather concho. I know you have seen them but maybe didn't know they was called bleed knots. You see them on saddles and such. :D
You do nice work JD. I have to agree with the rest that you are much to tuff on yerself. The mark of a true artist, I reckon!!!
Keep up the good work,
Horse Pen
-
Damn nice work all around, pards. Be proud.
10W: Sheaths are very attractive. My favorite is the darker one (middle sheath in the top photo) but they're all first-class. Good job.
JD: Gotta agree with Horsepen, Will and others...
Horsepen: Really like the rig. Color, stamping, balance and lines are outstanding for my taste.
-
Thankee kindly Dave!!! I am drinkin' a cup a coffee to yer health right this minute. Hope to meet ya in March.
Cheers,
Horse Pen
-
Howdy Horse Pen,
Wow! That is one gorgeous rig!
Many thanks for sharing your talents with us.
-
Thanks H Pen, I appreciate the feedback. I have seen that knot, but didn't know it by name. That sure is a fine looking rig. I'm fidning the basket stamp is real challenging to keep straight, as is the meander stamp. No sub for practice!
Sorry for being nosey, but is there a meeting of leather guys somehwere? If it's a person meeting, then please accept my apologies for buttin in. JD
-
You ain't bein' nosey. It ain't no secret neither. In March there is going to be a NCOWS whing ding in Kansas City. Check out the NCOWS Forum on this site and look for the announcement by Grizzer Bear. It's gonna be good boys. Saddle up!!!
Horse Pen
-
Thanks for the info H Pen.
Here's one more piece in progress, a flask wrap. It's a project I began at the local Tandy store class. I have no need of a flask, but it was the project of the day!
I used my new (to me) Henley swivel knife I bought from E-Bay. I'm finding the swivel knife to be the easiest part of the process. My beveling is too choppy, so I don't want to finish this until I can move my tools a little smoother.
-
Hello HorsePen :o ;D
Awesome Pard, what a beautiful rig, this is the style I like,your stamping and tooling is spot on , and I really like the color, the bleed knot, sets the concho off very nicely, I just joined NCOWS , and if that Kansas meeting wasn't so far away, I would be there, it would be nice to meet you all.
Irish Dave , thanks for the kind words on my knife sheaths Pard.
tEN wOLVES ;) :D ;D
-
Thanks for illustrating the bleed knot, X-pen. That's another great rig. I really like the leather conchos on it. With that shade of brown, they look very balanced and graceful. I appreciate your posting that pic.
-
Howdy Pal
Great job. You make me proud.
WC
-
JD,
that holster looks great. you may want to stamp your initials in the front center area or just leave it the way it is.
i personally would color it and sew it up, use it for awhile. then go back to the drawing board to adjust what you dont like about the holster if there is any adjustments to be made.
your oak leaves look better than the first ones i did you are doing great.
as far as the beveling goes you can always keep going back over the area to smooth it out with the beveler.
the beveled spots that you are going to background do not have to be as smooth as the spots that you are not backgrounding.
because the background tool will clean up all the unsmooth spots when you start backgrounding.
on some of the stuff i carve i will background the width(the long side of the tool) of the background stamp around all of the outside of my carving.
then i will use a matting stamp to fade the backgrounding into the rest of the non toolled leather.
i do this to help my carving be more defined and it helps me to clean up spots that i dont like.
-
Looks, Like i have been slipping and not keeping up on the posting1
TW, Those are some outstanding knife sheaths, very thought out, and everything seems to compliment each other and the color and the 2 tone look gives the a very elegant stle, They AWESOME! thanks for sharing!
JD, i wished I could carve like that! good job!!
HP. that is a great looking rig,, you allways come up the cleanest lines that flow toghter, that is something most of you guys have, like TW and you, and I could name a 100 more. But that is were I lack! :-[
I started a rig back in the last of Sept. and then it turn of cold, had life complications, and then other factors, if it would just get to 60 degrees and stay there for a few days, maybe I could get a little relief and get it done!
Sorry about slipping behind, Keep up the good work!
ACE
-
JD your craftmanship is darn good on that holster any time your work looks that good without any color you are on the right track pard. That is a great design for a Ruger holster. Your carving is good also stay at it.
-
Thanks, Wiley, I really appreciate your comments, JD
-
OK. Here's the update of the finished cuff. Got the buckles all done up too. Got the other cuff to do (it's laid out), then all the oiling, forming, perhaps some dye, and then a finish. I'm figuring on two large leather conchos, an antique brass two slot metal concho and then calling it done. These suckers are HEAVY leather, too. LOL.
(http://forums.horsecity.com/uploads/1230515773/gallery_20846_608_69106.jpg)
(http://forums.horsecity.com/uploads/1230515773/gallery_20846_608_33346.jpg)
(http://forums.horsecity.com/uploads/1230515773/gallery_20846_608_109481.jpg)
(http://forums.horsecity.com/uploads/1230515773/gallery_20846_608_7295.jpg)
(http://forums.horsecity.com/uploads/1230515773/gallery_20846_608_122937.jpg)
(http://forums.horsecity.com/uploads/1230515773/gallery_20846_608_84606.jpg)
-
JD, keep it up pard. Your stuff is lookin really good. And the more you do the better it will get because you care about your work. All of use are our own worst critics. I just got back into leather work after a very long dry spell and that was caused by never thinking my stuff was good enough. Show your work and be proud of it.
Rolling Thunder, you work is also very good. And welcome to the forum. I have been out of touch for awhile and it is always good to see new items on here. I always see new ideas and different ways to do things and it tends to kick the thought processes into high gear.
You pards keep up the good work.
Gun Butcher
-
Howdy RT
I've gotten so I really look forward to ( show your stuff ) again beautiful work pard, your tooling and stamping look to me to be perfect, my hats off to you on your design, I really like what you have done, and by adding the spots it will really add a nice touch , can't wait to see the finished cuffs. ;D
tEN wOLVES ;) :D ;D
-
RT, that is some amazing stamping. Downright complicated, but in a good way. The basket stamping really looks great, and whatever you've done on the lines looks really cool too. Nice work all the way around.
-
Howdy Rt,
JD, TW & GB hit the nail on the head. You certainly do beautiful work. Many thanks for sharing this with us
-
RT, I agree that your stamping is really good. You've produced a nicely lacy impression with your use of the stamps. Just enough without overdoing it. Good use of spots, too. I also am looking forward to the finished cuffs.
-
Here's a good question for you guys that perhaps you can help me out with. When you lay in your spots, do you lay them in before or after your oiling/dying/finishing or after? I usually lay them in before if I'm dying the piece, especially with an antique application, because it fills in the area around the spot and makes them look like there's been a build up of "stuff" there.
But what do you guys prefer to do? I'm learning this all as I go along, so it's pretty much catch what knowledge from where I can catch it, and when I can catch it.
And I dunno about perfect spot placement or stamping either. Get a good look at that last image, where you see the corner spot wasn't quite all the way up to the corner. That's a flat-out brain fart there. LOL. The stamping is a bit off in it's spacing there as well, but I think it's hidden well by the pattern, lol.
At least I had enough common sense to not put spots where the buckle and billet will go at the wrist. LOL.
-
Shhhhhh, don't ever point out yer mistakes, RT. Nobody woooda ever noticed. I sure didn't. That's some great bunkhouse quality stuff right there. Keep up the good work.
I put my spots in whenever the urge strikes me. Before the dye, sometimes after the dye. :-\
Horse Pen
-
Bunkhouse. Bunkhouse. Bunkhouse. I need to get that concept firmly in my brain. This perfection stuff has got to go~!!!
-
;D ;D Now yer gittin' it, JD. ;D ;D
Have a party,
Horse Pen
-
Well, there's a difference between perfect and "wow, that spot is about a quarter inch off." lol.
But, then again, I'm just thinking "upscale bunkhouse." LOL. You know, the kind with an attached two-holer?
-
RT you did it again pard those are good looking cuffs can't wait to see both of them all finished. Thanks for sharing
-
Howdy R.T.,
I put the spots on after finishing. I never tried placing them first. I am curious if some of the alcohol based dyes will affect the finish. Were they antique spots you used? I just bought some and was thinking about using them on a pair of oiled cuffs. It was clever the way you finished the edge of the basket weave field. I bought a second basket weave stamp and grinded half away so I could get the weave in closer to the edge. Here's a picture of mt latest rig for a customer.
Happy Trails,
Panhead Pete
-
The spots were antiqued Pete. I use the eco-flo stuff from Tandy, although my saddler used to make dyes and paints for a company and he thinks it's funny how they market the water-based stuff as being eco-friendly. Perhaps more eco-friendly than oil-based, but he says not as much as one might think.
I wanted those original cuffs to look like there was grime built-up around the edges of the cuffs and in there where the spots met the leather, so I added the ridiculous number of finishes in there so they would resemble that, after I did the spots.
(http://forums.horsecity.com/uploads/1229907509/gallery_20846_598_83679.jpg)
So on these new ones, I am going for a really bunkhouse look, and will only use wax, and see what I get with 3-4 applications. I sorta like the whole antiqued/used look.
Now, as for your rig you showed there, WOW. Classic looks there. Nicely done spots, they really set off the design. And the color you got on that piece of leather is pretty nice too. Love those rich reds coming through there. Very nicely done!
-
Probably a pretty silly question, but how do you buckle that billet in, Pete? It doesn't look like there are buckle holes, so is there some other form of securing going on? Got me corn-fuzzled there, and now I gots ta know what the mystery is!
Spill it pard!
-
Very nice looking work Pete.
R.T. VERY sharp observation. I missed the lack of holes completely..
Well, maybe regular observation by you, and VERY dull observation by me ::)
-
Howdy Pards,
Thank you for the kind comments. I had just finished the belt and wanted to send a photo. It was taken before I punched the holes. Good eye Amigo!! Those cuffs are exquisite, R.T., nicely finished!!
Happy New Year,
Panhead Pete
-
Dang. I thought maybe I was on to some sorta seriously nifty secret there! :D
-
That's a fine rig, Pete. I like the rich color with the clean lines. The spots and conchos really work on them. Thanks for sharing that with us.
-
Very nice Pete beautifully done the coloring is great. Whoever gets that rig should be plenty happy with it.
-
Reckon since everybody is in a cuff making mood here's a pair I just finished......
(http://www.wrtcleather.com/1-ckd/1-2009/cuffs-whited-090103.jpg)
-
Those are pretty striking, Chuck. I like the way you encorporated the spots with the stamping on the centerpiece. Thanks for showing us those.
-
Chuck,
Those cuffs turned out real nice. Is the buckle and strap just held on to the cuff with the spots?
Horse Pen
-
Liking all the two-tone being used on the cuffs. Striking.
-
WOW! Chuck, besides the design and workmanship, the final color of your products is really something to see. Sure glad you take time to show them to us. JD
-
Bravo Chuck! Those are real straightforward slick! Love the spot incorporation, the lacing, the stamping! Everything! Nice work!
-
Chuck:
Very nice, indeed, pard -- as always. Thanks for sharing.
-
Chuck, I think the craftmanship the layout, stamping, spots, lacing, wrist straps, stiching, and the coloring are outstanding! Thanks for sharing pard. I love this site I learn something every time someone shares their work.
-
Howdy folks and glad ya'll enjoyed the look see.
HP - the buckle strap is held on by the spots - I used the 1/4" round head spots with extra long 5/16" legs from Standard Rivet Co. The body of the cuffs is a: 5/6 oz bark tan outer with a 3 oz upholstery leather liner (whihc I rolled over to the front on the wrist end, makes cuffs real comforatble), and the buckle strap is 3/4 oz bark tan - the prongs were plenty long to clinch over real good.
The idea was to give it the look of a bunk house repair to match the spots which were also a bunkhouse "addition".
The bark tan cuff body was dyed with coffee (a full jar of extra dark roast INSTANT coffee cooked up with two jars of water) after stamping and sewing on the liner. I then applied a coat of Lexol Conditioner followed by a well rubbed in coat of Tan Cote, the latter to act as a resist for later aging. After drying I folded and bent them in all directions to crackle the Tan Kote. The straps were dyed in dark walnut and then dipped in baking soda mixed with water - the latter helps to fix the dye and darken it a mite - I use about an 1/8th cup of BS mixed with a pint or so of water - I seldom measure, just go by eye and "feel".
After the straps and all spots (pre-aged) were attached I "washed" the whole piece in walnut dye - the crackled Tan Kote allowed the dye to absorb through at the crackles and resisted elsewhere. Once dry I added some "stains" with a few splatters of vinegaroon. To finish up I burnished well with a piece of canvas, then applied a coat of Lexol followed by Montana Pitchblend.
It took a bit more than that to get the final look, but that's the gist of it - wish ya'll could see tham in person - even better - cause the camera just doesn't pick up all the nuances of color and texture, nor that indefinable odor!
FWIW - this my first project of the new year, but most likely the last time I make cuffs! I promised these quite some time ago and finally sat down to do them - for whatever reason(s) cuffs are one item I REALLY don't enjoy making........
-
Chuck,
That customer of yours is one real lucky feliow! The LAST pair of cuffs that you made! I'm not much into cuffs, but I would be real proud to own those! ;D
-
Coffee? Wow, I never thought about that as a dye.
-
Howdy Chuck
Like every body else, I really appreciate you sharing your fine work, and these Ropping Cuffs are outstanding, I really admire your technique and style, you can spot your work anywhere.
tEN wOLVES ;) :D ;D
-
This either takes guts or stupidity to show right after Chuck and I think it is the latter. This is a 1911 rig for a law enforcement friend working on the Texas/Mexican border. He didn't want a strong western look so I kept it kind of plain.
-
Anyone would be proud to wear that rig. That's professional looking in every way. I've not seen a buckle like that before. (not that I've seen a lot of buckles to begin with) It looks real good on that belt.
Thanks for sharing, JD
-
That rig looks good, Wiley. The texturing in the center of the belt billet looks nice. Everything has a clean look to it. Most appropriate for your friend. Thanks for the pics.
-
Howdy Wily
Nice work pard, you don't have to feel bad about this, your an artist in your own right, and your friend will love it for sure.
tEN wOLVES ;) :D ;D
-
Really great color and finish there Willey! Love the deep color there. Just really looks pretty nice on that belt.
As for Chuck's coffee/BS (took me a second look at that one ... "did he really hand rub a cow patty there? oh wait! Baking Soda! DOH!") recipe ... I just KNEW there had to be a better way to get that old leather look and feel.
Mind if I experiment with your recipe on this next one Chuck?
I have a friend who was involved in the leather restoration work at the Cowboy Hall of Fame when they did their big renovation (a good friend of hers, Richard Rattenbury wrote the book, Packing Iron: Gunleather of the Frontier West and she was kind enough to lend me her copy of it. Lots of great stuff in there, and I think that's what really hooked me onto the whole bunkhouse look, because some of that stuff just looked soooooo nice.
Sorta like a copper roof needs a patina to look good.
So waddya say, chuck ... think I might just co-op your recipe there?
-
As the man once said "No Problemo!"
also check this out.........there's a lot more to getting that aged look than color...been "aging" leather for about 40 years now and I'm still learning.......and FWIW - I know some folks who use manure as part of their aging....... :-X
A suggestion - go to gun shows and second hand stores ans such and look at leather that's a few years old and well used, study it and try to imitate it........that way you'll get stuff that looks like it's been used in the last few years, but in the style of back when - rather than stiuff that's 150 years old, which has a 150 year old patina - that's the way I approach it anyway...........
http://www.wrtcleather.com/1-ckd/tutorials/aging-leather-zurl.jpg
Dr Bob - the gent getting those cuffs is an NCOWS member so watch for them the next couple of bigger to dos. Hint - He also packs one of my knives and beaded sheaths..........
-
Thanks for the heads up there on that article! Printed it out for later.
Dunno if maybe that should go someplace in The Leather Shop collection Marshal? Waddya think?
-
That's a good idea, RT. I think we have a thread somewhere on aging leather. I'll see if I can find it and we can add that link to it. Then we can include that thread.
-
CB,
The arm cuffs are AWESOME, very gracefull layout, every stamp, every spot, the lacing, is to perfection! I don't realy have any thing else I can say, for I havn't seen anything you have done, that is displeasing, and your style is all your own. I find that the hardest part of the leather work is designing a pattern of stamps , spot, ect., that fits. and your allways does.
Great work!
I thank you for sharing, for every piece you do, inspires me to try harder!
Wiley Desperado those are some nice clean pieces you have made, and I thank you for sharing!
ACE
-
Chuck,
You are very generous. Many thanks for sharing your talents and techniques with us. Just watched your Holster DVD again for the umpteenth time. I always learn something new.
Wiley,
Somewhere I read that "He who exalts himself shall be humbled and He who humbles himself shall be exalted". Well I think you need to be exalted. You did a beautiful job on your friend's 1911 Rig. He will be very proud to wear it. Look forward to seeing your future projects.
-
Here's a picture of my latest Slim Jim from Will Ghormley's 49er Holster Pack.
http://www.carricoleather.com/oldwestleather/moreholsters.html (http://www.carricoleather.com/oldwestleather/moreholsters.html)
-
Very nice work David! That's a slick bit of tooling to be sure!
-
Let me echo the other compliments on the workmanship. The more I do this, the more I appreciate the outstanding work of others. Both the carving and the coloring are awesome.
Thanks for sharing the picture, it's a great inspiration, JD
-
That's really beautiful, David. I really like that floral pattern. It has just the right amount of texture for that holster. Great color. What kind of finish did you put on it? It has a gloss without being too much. Thanks for sharing. :D
-
Nice work Pard ;D
TW ;) :D ;D
-
Thanks all for the kind comments on the 1911 rig very much appreciated. The great work displayed on this site gives a fella motivation and something to strive for, ya'll set the bar high.
Holy smokes!! David that is a beautiful holster. The craftsmanship is outstanding. The stiching, border stamping, great floral carving, the coloring, truely impressive, if that is going to a customer they will be mighty happy with it. Thanks for sharing pard.
-
Thanks for the comments guys! That was the first one made with that pattern, I hope the next one will be a little better. I just oiled it with neatsfoot oil, went over it with Fiebings dark brown antique finish, to make the background and cuts stand out, and then a coat of Neat Lac. It came out a little darker than usual with just the neatfoot oil, not sure how that happened. It wasn't for an order, just something I've been wanting to make. When I'm not making saddles and holsters for a living, on my weekends I like to make.....saddles and holsters!
Thanks for looking!
-
When I'm not making saddles and holsters for a living, on my weekends I like to make.....saddles and holsters!
A true addict. ;D
Thanks for the finish info.
-
That turned out real nice, David. I really like the color of it and thanks for the recipe. I have some mahogany that I will try on the one I am making and show ya how it turns out. The Neatsfoot oil turned yours a nice rich color, in my opinion.
Thanks for showing it,
Horse Pen
-
Well, everyone, I finally went and done it. I got a maker's mark (thanks to all of you on here who gave me the needed push).
I got it done over at PhillipsEngraving.com
This image is on a set of Slobber Straps I am working on. I was gonna wait until it was done and oiled and stained, but I figure'd to heck with it, you guys won't mind.
(http://forums.horsecity.com/uploads/1231165549/gallery_20846_608_106744.jpg)
BTW ... the tooth-space between the stamps was indeed on purpose. I did it once as an accident, and just repeated it, and sorta liked it, because with that stamp, it didn't flatten the smaller dots in the stamp on the edges.
-
That really looks great, Rt. Thanks for showing it to us. Be sure to post it on our Maker's Stamp thread: What does Your Maker Stamp Look Like? (http://www.cascity.com/forumhall/index.php/topic,18288.0.html)
-
Thanks Marshal ... already beat ya there. Hehehee!
-
::) :o 8) ;D WOW, Like Will said nice stamp ;D
tEN wOLVES
-
Thanks Marshal ... already beat ya there. Hehehee!
;D 8) ;)
-
Been in advertising and marketing on the design and creative side of things for a little over 20 years. LOL. It was a fun stamp to design, but then, I tend to second-guess stuff I do for myself a lot less than the work I do for other folks. ;)
-
Great looking stamp. Great design. I just found out about Phillips Engraving last week and have a new stamp being made. Their stamps look great and are affordable.
-
Rolling Thunder:
Your makers stamp is simply outstanding, in my view.
I'd be obliged if you'd share some of the details on what you ordered from Phillips. (Cost, model, type etc).
My old makers stamp is in need of replacing and this looks like very good work at a very good price.
Thanks again.
-
Hey there. if you go to http://www.phillipsengraving.com and visit their "leather stamps" page they have a basic ordering package, or you can send them custom artwork (what I did) ... costs the same I think. Delivered to my door, it was $48.
:D
-
Howdy RT,
That is a beautiful design you made for your maker's stamp. Many thanks for sharing your talents with us along with posting the link to Philip's Engraving.
-
Thanks, RT.
-
RT nice stamp good design pard whoever gets any of your work will like that one for sure.
-
been doing leather work a while but not much for holsters and stuff mainly wallets and stuff
-
Those look perdy darned nice! :D
-
;D thank you bud just got back into tooling a few weeks ago after i blew my knee out 2 months ago been doing leather work off and on for 25 years loll
-
Looks good, Cowboy. For some reason, I can't pull up a larger image of them but what I can see on the thumbnails, they look great. I'll take another look tomorrow. Thanks for sharing.
-
Real nice work Cowboy thanks for sharing pard.
-
thank ya fellas hope to get more and better pics got a belt in the works now so ill get it posted soon
-
Been lost in the ozone for a week or so and it always takes a while to catch up with you guys. Chuck as always your work is top notch and I do love lookin at it.
Cowboy, welcome to the forum and keep showin your work it looks great.
Wiley, that is a fine lookin 1911 rig. Your pardner will be proud of it.
Rollin Thunder, you have inspired me to design and make my own MM, yours looks perfect.
Heck, I probably missed someone, but not on purpose. Like Johnny says Thank you all for sharing your talents and ideas with the rest of us. It is greatly appreciated.
-
just playing with a new blade and some good scrape skirt leather ;D
the joy of a new blade and knowing how to finally keep it sharp lol
Cowboy316
-
Nice. Nothing better than a sharp tool.
-
cowboy,
Nice carving!!! I am going learn to do that someday (maybe) ::) ::), Keep up the great work, and Thanks for sharing!
ACE
-
just playing with a new blade and some good scrape skirt leather ;D
the joy of a new blade and knowing how to finally keep it sharp lol
Cowboy316
Howdy Cowboy 316
Nice carving pard, this is fun stuff , the more you do the better you get, thanks for sharing
tEN wOLVES ;) :D ;D
-
Obviously you are no rookie or newbie, Mr. "Sheridan Carving" That's good looking tooling there Cowboy. JD
-
Thank you JD for the compilment but im by far no Mr Sheridan lol im just here to enjoy the art of leather work and show my stuff
Cowboy316
-
You realize I meant that "Mr. Sheridan Carving" as a complement, not a snide remark. Chan Geer will be holding a 3 day class in Portland around October, and I plan to attend. He did one last October, but I couldn't make that one. The people around here that did really came away with some skills, and of course a few tools ;)
-
jd
i knew your where meaning it as a compilment i was just being a smarty pants lol i love when i get compilements lik that
Cowboy316
-
Second Holster
(http://i292.photobucket.com/albums/mm12/magnolialeatherworks/HolsterAlone.jpg)
Thrid Holster
(http://i292.photobucket.com/albums/mm12/magnolialeatherworks/KnifeFlowerSlimJim.jpg)
Fourth Holster
(http://i292.photobucket.com/albums/mm12/magnolialeatherworks/RoundFlowerTooledSlimJim.jpg)
and a cuff!
(http://i292.photobucket.com/albums/mm12/magnolialeatherworks/CenterFlowerCowboyCuff.jpg)
man this leather stuff is addictive!
-
Howdy Sam
That's some good lookin work.
WC
-
Howdy, Sam. Nice work. I really like your middle holster with the cut pattern. Thanks for sharing those with us. Welcome to the forum. Looking forward to more of your posts.
-
howdy sam
very nice work, love the cuff i need to make another pair some day but not really needed right now
keep it up and thanks for sharing
Cowboy316
-
Howdy Sam,
Wow! That's some beautiful work. Right out of the pages of "Packing Iron"
Many thanks for sharing this with us.
-
;D Howdy Sam :o
WOW, you do nice work pard, and your right it is addictive, Welcome to the forum, and thanks for sharing your work with us. ;D
tEN wOLVES ;) :D ;D
-
MS,
:o :o :o :o AWESOME!! That is some super fine carving!!
thanks for sharing for all to see!
ACE
-
Very nice work! Bravo pard!
And as you can see here, I got a LOT of work to do on my tooling.
(http://forums.horsecity.com/uploads/1231953517/gallery_20846_551_41626.jpg)
(http://forums.horsecity.com/uploads/1231953517/gallery_20846_551_22564.jpg)
(http://forums.horsecity.com/uploads/1231953517/gallery_20846_551_32216.jpg)
Hoka yall!
-
thunder very nice i love a good pair of spur straps that are hand made
keep it up
Cowboy316
-
Those look good, RT. I like the design and personalizing them with the name. Nice work. Thanks for sharing.
-
OK, first things first. I'm only posting this because I've asked so many questions, and received so much help, I felt I should give a little evidence that I've followed some of it.
I'm in the process of sampling various dyes to figure out what color I want on the belt.
I did not build the redish belt, but I did make a new billet for it, sewed it on, and made the belt keepers. I think I've gotten over my apprehension of sewing.
The black belt is for our club to use on orientation day. It's super adjustable, and I hope to maket a couple of holsters for it soon.
I've got several questions as a result of this little bit of work, but I'll post those separately.
-
;D boy oh boy JD top notch there bud excellent work makes a man feel good when he get to a point where things are takin shape cant wait to see the finished product
Cowboy316
-
Nice, JD. No matter what color you choose, that belt will look good. The overstitch line works with that border design. Looking forward to the finished product.
-
I'm no expert, by any stretch of the term and still have much to learn. I recently finished a one year apprenticeship under a gentlemen cowboy with 25 years experience in the shoe, boot, saddle repair & custom leather making field. Sadly he closed his doors the day before Thanksgiving to "semi-retire" so I started my own saddle repair & custom leather shop out of my home for now.
I know my work is not top quality or anywhere close yet, but I'll post some pics of the work I have done so far.
(http://www.saddlerider.com/images/ballcap.jpg) (http://www.saddlerider.com/images/barbedwirebelt.jpg)
(http://www.saddlerider.com/images/m1scabbard1sm.jpg) (http://www.saddlerider.com/images/guitarstrap1a.jpg)
I have some other pics on my website if you want to see more.
-
RT,
Beautiful job on your Spur straps. Don't be so hard on yourself..... Your tooling looks great! Very nice design!
JD,
Looking good on your Belts! Nice, neat job of stitching and stamping. Look forward to seeing the finished product.
Saddle Rider,
Nice looking work. Neat design on the hat brim. Best of luck to you in your new venture. Look forward to seeing your future projects.
-
Thanks everyone, I do appreciate it. Johnny, a special thanks to you for the sewing tutorial. I went back and read it again, then went forward. I used a chisel punch because I don't have the Dremel set up for drilling yet, but that's coming.
Saddle Rider, very nice work. I really like the barbed wire. I have a set of those stamps, and will use them on a belt soon. Anyone who builds a saddle is a "Pro" in my book any day.
-
Howdy Gents ;D
I think you all deserve a pat on the back, a big well done to all, nice neat work...... ::) :o 8)
tEN wOLVES ;D
And a big howdy do to you to Johnny ;D
-
JD -- Those are looking really nice and really even so far. I too want to see it when it's finally finished! WOOOHOO!
Saddlemaker - I love the hat! That just flat is very cool! Thanks for sharing those!
-
Howdy, SaddleRider. Your work is good. I like the hat brim a lot. Nice idea to put the barbed wire down the center of the belt instead of as a border. That's a good idea because it leaves more smooth leather just inside the border. Congrats on starting your own business. Nice that you had an experienced person to steer you along. Looking forward to seeing more of your work.
Today I finished up my Frank James holster. I've been looking forward to making one ever since I got the floral stamps. Thanks to Will Ghormley for the inspiration and the stamps.
-
Saddlerider, that's an amazing look rig you have going there! Great look, I really like the combination between the tan and black.
-
Well, it's about time that the Marshall shows off some of his handiwork! And it's real nice handiwork too! Bravo!
-
Will, to me one word sums up that holster, Classy. Clean lines, rich color, sharp in every way. Thanks for sharing that picture, JD
-
Howdy Marshall,
Beautiful job! You have created a very clean and elegant looking holsterthe. Excellent workmanship! Many thanks for sharing your talents with us and for the great job in moderating this forum.
-
Thanks pards. It was a fun project. It was almost hard to cut the hammer notch in it after the holster was finished. This is going to be used in a display of outlaws of the West so it needs to look authentic. This will be shown with an 1875 Remington and a Jessee James rig with Schofields.
-
;D 8)Howdy Will
Beautiful job, I guess this is the first time I've taken a good look at the Frank James holster, it really does have nice lines, and Thanks to Will G. for making these stamps, the front part of the holster seems to be in two pieces, or am I not looking at it right, is there an overlap on the front, just below the top of the bucket?, your black dye came out well too, did you use vinegaroon or what, it has a nice natural sheen to it, WELL DONE Pard ::) :o 8) 8)
tEN wOLVES ;) :D ;D
-
10 Wolves, thanks for asking great questions! I was looking again at Will's holster, and wondering how he got that black so rich and smooth looking (Sounds like I'm describing gormet coffee)
-
Hey pards you guys are surely turning out some great stuff.
Welcome to all of the new members and keep the projects rolling.
MW that is pure class no other way to put it.
JD, that cutout is actually a cutout, its the hammer notch that Will was talking about hating to cut in the finished holster unless I am badly mistaken. And while I am addressing you I would like to say your stuff looks super. I don't think you have to take a back seat to anyone.
-
Thanks, pards.
GB is right, that notch is cut out after the holster is finished, just like the original. Frank James did that so he could cock his pistol in the holster before he went into a situation where he'd need it.
The finish is vinegaroon, neutralized with baking soda solution. It got assembled after the dying process. After drying from wet molding, I gave it a light coat of EVOO and let that soak in for 3 or 4 hours. Then I put Lexol conditioner on it and gave it a light buffing after that had soaked in.
It was fun doing a pattern with the swivel knife then beveling both sides of every cut. I like the look it produces. I may need to try that again one of these days with another design. I have to make another holster for re-enactments. Maybe I'll do something for that. Maybe not, that holster has to be black and it would be nice to see how it looks in a light brown. Decisions, decisions. ;D
-
Good night nurse!! What a great bunch of good looking leather. If this doesn't insipre some more cowboys to get involved in leathercrafting I don't know what will. JD good looking belts you have got the right stuff nice work. SaddleRider looks like you're on your way to a prosperous leather business nice work everything is well done. RT nothing wrong with your work cowboy those are nice looking spur straps. Marshal I can not tell you how much I like that Frank James holster pard, mighty fine leathercrafting, any cowboy would be proud to wear that one. Thanks for sharing pards.
-
Thanks Wiley, I appreciate your encouragement. Will, after looking at the picture several more times, I finally understood the cutout. Sometimes I amaze myself by how slow I am to pick up on things! Old age? Tunnel vision? who knows. Thanks for explaining how you did that design. I don't know what Vinegaroon is, but I'll look it up.
Thanks for all you to for the forum Will, it's sure been a blessing to me. JD
-
Johnny McCrae
JD Alan
Rolling Thunder
Marshall Will Wingam
Thank you kindly. I wear that hat daily and its good "kind of free" advertising for my business too. LOL I found some other barbed wire stamps I want to get that I like better than the Tandy set and once I get them I'll make a new belt and hat with those.
JD
I don't actually make saddles. I repair and replace leather and other parts, as well as clean and oil them mainly.
Willie Dixon
Wiley Desperado
Thank you kindly as well. The saddle rig was and is my first attempt at a rifle scabbard. I wanted it darker to match the saddle and so did the customer, but my teacher who guided me in making it had other ideas, so I had to make it his way. I, nor the customer were happy with the end result, but he bought it anyway since he needed one to fit his M1 Carbine to go hunting.
Now that I'm on my own, I'll do it the way the customer wants, not the way my teacher wanted things done. LOL
The pic of the guitar strap isn't the best. The color came out to be something close to a mix of Cherry & Brown.
Thank you all for the positive motivation on my own business and my work. I do appreciate them all kindly.
I am truly inspired by all of the work I've seen you all have posted. Truly incredible and extremely professional works from you all.
-
I don't know what Vinegaroon is, but I'll look it up.
Here's Chuck's thread that explains it. http://www.cascity.com/forumhall/index.php/topic,11991.0.html (http://www.cascity.com/forumhall/index.php/topic,11991.0.html)
Now that I'm on my own, I'll do it the way the customer wants, not the way my teacher wanted things done. LOL
How about giving him a call and offering to re-dye it? It is a good item and would really look outstanding with a darker color on it.
-
dont know what im gonna do with it but i thought it turnd out cool
-
Thanks for the link Will.
Cowboy 316, if I squint I can just barely make it out. I can't advise you, but there is a section on this thread about posting pictures that will come out larger when you click on them. With just a thumbprint it's hard to make out.
From what I can see, it looks great. WC makes something similiar that he fills with bird shot, and uses to hold leather in place when you're working on it. I use canvas shot bags with some, but not a lot of shot in it, but WC's, and now Will's looks much better.
-
well i need to get batteries for my digital camera and quit tryin to use the web camera lol
ill get some tonight and take some better pics
Cowboy316
-
Hey ya'll, remember them heavy-leather cuffs a few pages back? Well, I got them done. Here's a little WIP and some finished pieces.
The right cuff ... dyed and then rubbed -- did that a few times on each.
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_30017.jpg)
The left cuff, dying, let it soak in and then rubbed it. Looked like an oil slick at first!
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_109037.jpg)
A detail of the rub. I call that stamping "Oregon Lace" ... sounds fancy, don't it? LOL.
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_18803.jpg)
Did I mention that I hate lacing?
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_39643.jpg)
Mark turned out well enough, though.
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_61302.jpg)
Finished, and assembled with bloodknots and leather conchos.
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_36661.jpg)
The Finished cuffs on my Aussie Saddle
(http://forums.horsecity.com/uploads/1232399836/gallery_20846_687_81817.jpg)
Let me just say that before I work with leather this heavy again on a project like this, will someone please shoot me? LOL
Seriously, though I learned SOOOO much working on these cuffs. And considering they are destined for a mantle, at least all the imperfections won't be pointed out with use.
Now on to make ANOTHER set ... this time for using. Less detail and more bunkhouse!
-
what dies did you use to make those colors the color looks amazing!
great job!
-
Eco-Flo Dark Cocoa Brown. It's almost black when you dye it in and leave it there, especially after a few coats. I dyed the leather, let it sit, then rubbed it with a soft cloth. Sort of like you would with antique finish. I did that ... oh, three or four times, then put the dye on and let it sit overnight. After that, I put a light coat of Carnauba Cream on it, and rubbed it down good. Then I put a couple light, light,light coats of EcoFlo Super Sheen.
There's probably a lot easier way to get this color though. That was a lot of wiping and dying. Then again, I always do take the long way around the barn. LOL.
Speaking of EcoFlo Super Sheen, anyone ever use that stuff? Is it just me, or does it smell like KFC Cold Slaw?
Thanks for the compliment, too Willie. I appreciate it. :D
-
hey thunder very nice work would love to have those on my mantel lol
i love the rich dark color and the design did you design them your self
id like to get a pattern of them if i could make a great mantel or wall piece in my house
Cowboy316
-
better pic of round leather tooling
-
The practice piece looks good, Cowboy. Nice work. You'll find a good use for it.
Great job on those cuffs, RT. I love that color. Keep up the olil slick. It seems to work well. I was waiting to see the finished product. Thanks.
-
The basic layout is Will Ghormley's, so I don't think he'd be too thrilled with me posting the layout that he sells as part of his roping cuff collection. :) The Oregon Lace is mine, and yes, I did design the overall look of the cuffs. I used two camos, a veiner, a small flower, a large flower, a small basketweave, a small spot and a modeling spoon, too.
I've been considering doing my own version of a roping cuff design for the next one I do, so if it works out well enough, I'll post it over in the patterns thread.
-
That's a much better picture cowboy! LOVE that work! Very nicely done! Bravo!
-
R.T.
AWESOME cuffs man :o :o :o They kick$$$$ big time! I hope to get there someday ::) ::)
Later ACE
-
Man oh man, you are both doing GREAT WORK. Cowboy, that'some nice carving. After one attempt at a flower, I moved over to Oak Leaves. Once I get those down I'll try something else.
RT, what a piece of work! I'm glad I Don't know how to post pics that sharp, 'cause I would be embarrssed to post any of my stuff. The color is outstanding too. I thought maybe you went to the Chuck Barrows school of dyeing leather (If there was such a thing, I'd be there!)
Thanks to both for posting picks
-
I dunno if my stuff belongs in the same congratulations as Cowboys ... that floral tooling has gots me drooling. LOL. Just hands down great stuff!
As far as the school of dye work, well, I actually just went to the "Hmm, I wonder how THIS would look if I spilled it on leather" school. I did love Chuck's coffee cuffs though. Those were flat amazing. I mean, it looked like he broke into a museum and swiped them critters, it really did!
-
JD
speaking of oak leave im in the process of doing another tooling sample with acorns and an oak leaf lol
ill post a pic when im done with it too
gonna try to get to tandy and get a holsteer kit and make it just for grins even tho i dont have any thing to put in it
if any one have pics of their oak leaves id like to see the different styles of tooling
Cowboy316
-
Cowboy, your carving is really very good.
RT, I don't know what I can add to what has already been said about your roping cuffs, OUTSTANDING!!
-
;D Thank you everyone for all the comments im greatfull for it
ive always thought bout tryin to get into makeing and selling my
work but just not to confident bout how it would go and not sure
bout how to go about getting started
Cowboy316
-
Marshal Will & Rolling Thunder:
Damn, I turn my back for just a little bit and there's PAGES of new stuff.
Great looking work, fellas. First class all the way from where I sit.
-
Thanks, Dave. That'll teach you to look away for a minute, eh?
-
not sure how good the pic is but its an oak leaf pattern
-
It's a little out of focus, but it looks to be good work. Thanks for the pic.
-
Howdy Marshal Will and Gents ;D
I just thought I would bring to the attention of all us leather men, that we're on PAGE 200, on this of January 20, 2009 the same day as the Inauguration, its been a great trip for me , when I started in this forum it was back in 2005, I never posted then, but looking at all the fine work that was displayed here was just what I needed to light that fire, along with a shove from CowboyWC, We have without question the best bunch of Pards for sure, everyone goes that extra mile to help others with this craft, and they do it willingly and happily, no one is afraid someone is going to steal or copy there work, they actually welcome it. The support I have gotten here is unlike anything I have ever gotten anywhere, your all a Great bunch of Pards to ride the trail with. ;)
When I started looking at Show Your Stuff we were on page 26, we've come a long way. ;D
Here's to another 200 Pages :) :o
tEN wOLVES ;) :D ;D
Cowboy316
Nice work Pard, you're really coming along, I'm looking forward to seeing more from you, this leather work, is more like Leather FUN, it's good to have you with us, I think your addicted now ???
TW ;) :D ;D
-
Ten Wolves
Well thank you for the compliment and ive been hooked since i started doing leather work when i was 9 or 10 years old
that was 25 years ago just wish i would have kept doing it every day i can just imagine where id be now but im gonna get back into it just need the drive to keep going and the projects (thats the big on lol)
Thanks again ten wolves
Cowboy316
-
Howdy Cowboy 316
Nice carving on the oak leaves.
Did you not use a background stamp? The pix is kinda blurry so to me it looks like you only beveled.
Your work will stand out much better and look more raised if you also use a backgrounder.
WC
-
WC
no i didnt use one i was just playing im still working on it i used black dye to darken the back ground and believe it or not theres no finish on it yet lol
this leather was fun to tool and it dried while toolin it started to tak an antique look to it with out any dye it was weird but fun to work with
Cowboy316
-
Most excellent C316, most excellent!
-
same oak leaf pattern before back grounding and dying before back gorunding but with dyed back gorund
then dyed and backgrounded
-
Definitely looks best with the background tool used on it. The reason is that the background has no shiny highlights. I don't know if I'd have noticed that without your three pics. Thanks for posting those.
-
i agree marshal i like it with the background to but guess there would be a place for no background too
Cowboy316
-
When I do an area without any background, I often use the background tool along the edge and let it fade into the open area to accent the design.
-
C316 clarify something for me. Are we looking at one piece in a progression of work, or three separate works, each with different colors and background.
No matter what great work indeed, JD
-
How about giving him a call and offering to re-dye it? It is a good item and would really look outstanding with a darker color on it.
Great idea Marshal Will. I'll call him tomorrow and see if he'll bring it by and let me re-dye it for him. Thanks for the suggestion!
-
Marshal Will, your Frank James Holster is top notch!
RT those cuffs look awesome too!
Keep up the great work and the photo's!
-
Thanks, SaddleRider. If you do get to re-dye it, take a picture if you can to show us.
-
Hey JD bud
That pics of the same piece in different stages
i found a nothe style of oak leaf that im gonna work on if my energy holds out today
was in the er again cuz i could breath but im tuff ill get threw it
Cowboy316
-
hey ya good pard totally finished oak leaf patter dyed with fiebings Tan and then a coat of tan cote and buffed
-
CW316 your carving is good just keep on enjoying it pard that's what it is about.
Here is a little project I designed for a friend of mine it is for a big folding knife. The knife is a bone handled browning but a big Buck will fit very nicely also. This holster fits a 1.5" width belt.
-
Nice, Wiley. I like the coin concho on the strap. Looks good.
-
very nice Wiley
I love this group cuz you all are all so helpfull and full of great ideas and helpfull comments
you will be seeing a lot of me on here hope ya dont get tired of me LOL
got a holster design going and am workin on a blet now hope it all turns out good
for not knowing what im doing when it comes to holsters and belts like this lol
Cowboy316
-
Wiley that is some fine work. Your basket weave looks real good. I am going to have to try that one of these days.
-
Thanks for the kind remarks pards much appreciated.
-
Very nice Wiley,
I like the look of the basket weave and the Eagle cocho.
Keep it
ACE
-
Very cool Wiley! I love how it has the look of a Mexican Loop to it. Did you design the pattern for that?
-
I've been needing a holster for local re-enactments and such. I took the elements I liked best in the ones I've made and put them into one. This one isn't a copy of anything but a representative holster for the early cartridge era. I really wanted a brown one but my outfits called for black so it was back to the vinegaroon again. I cut it out Sunday and got it wet-molded today. Here's the result.
-
Great looking as usual Will. Is your border cut in, or stamped? I assume that's one of Will Ghormley's big flower stamps, sure looks good. Thanks, JD
-
::) :o 8) Classy looking holster Pard, your pattern is just right for this piece, you did GOOD FOR SURE.. ;D
tEN wOLVES ;) ;D
-
very classy indeed marshal i love the stamping pattern in it and the black looks really sharp
Well Done
Cowboy316
-
heres a cigerette case i made my wife last night anbd finished it today
-
second cell phone case
-
Marshal Will,
What a great border!! ;D ;D Ya done real good on this one!
C316,
Great cases. Really like the contrast on the cell phone case! ;D
-
Thanks, pards.
Is your border cut in, or stamped? I assume that's one of Will Ghormley's big flower stamps, sure looks good.
After stamping the two florals (yes, Will G's smaller stamp with a few embelishes), I made two parallel cuts 1/4" apart, beveled and stamped between them, ran a beader along the outside edges then cleaned up the stamp with a bevel. I still need to oil and condition the holster yet. It was still damp when I did that photo.
Cowboy, that cell case look good with the two-tone coloring. The one for your wife is good. Nice touch with the lighter pocket.
-
Howdy MW
Good Lookin Holster. Very Clean.
WC
-
Thanks for the explaination Will. I'm going to study that close up photo to see if I understand what you are saying. By beader do mean a double edge swivel knife blade?
After reading how to make Vinegaroon, I think I'll pass on that for a while. I don't know where I would get iron turnings, or the other iron substitutes. It sure came out well on your holster! JD
-
Will:
Very nice job, pard. I really like the holster. Clean, crisp lines. Tastefully bordered. Authentic looking. And excellent workmanship. Can't do much better than that in my book.
-
Thanks, pards.
Thanks for the explaination Will. I'm going to study that close up photo to see if I understand what you are saying. By beader do mean a double edge swivel knife blade?
It's a tool you run along the edge of your leather to round the edge and make a bead. http://www.siegelofca.com/view_cat_product.asp?id=18 (http://www.siegelofca.com/view_cat_product.asp?id=18) Second row, first item. I haven't bought one from them but it looks to be the same thing.
After reading how to make Vinegaroon, I think I'll pass on that for a while. I don't know where I would get iron turnings, or the other iron substitutes. It sure came out well on your holster!
It's easy. Clean a large 0000 steel wool pad with lighter fluid or carb cleaner (I've done both). Shake out as much as you can then put it on the ground and light it with a match to burn off the excess. LET IT COOL then pick it up and drop it in a quart jar of white vinegar. Let stand for 3-4 days uncovered or with a loose lid and you're in business. The stuff looks nasty but just ignore that. I never tighten the lid for a few weeks or until it's done working on the iron. I have a batch that is a year old and it now just turns the leather grey. I may want grey for something so I save it.
-
Hi WIll. As the page pulls up, the first item on the second line says this: C.S. Osborne TL21 Single Edge Creasers. I'll post the picture they show too. Is this what you are talking about? Evidently they come in five sizes.
Thanks also for the Vinegaroon clarification. I can certainly do that.
-
That's the item. You need to choose which size you want. I normally use a #1 for the edge of a cut, like I did on this pistol. I use a #3 on the edge of the leather, also like I did on this one. I have a #5 but it's too wide for most anything I do.
Good that you can make the vinegaroon. It's the best black I've ever found.
-
Thanks Will, I appreciate the info, JD
-
MW,
That is AWESOME, very, very clean lines! You realy made the border stand out, buy using the beveling tool, and the little extra's WG's stamp made it look a lot different i like it!
Thanks for shareing that.
ACE
-
Boy it don't take no time at all to get behind on this site. First of all RT I did design that knife case like a Mexican loop holster thanks for asking. Marshal your leathercrafting is absolutly top shelf, pro-class Pard. Cowboy 316 nice work Pard looks like your hooked on this hobby.
-
Howdy All,
I was down in Florida for awhile gettin’ a little sand in my shoes and need to catch up. I just want to say that all of the work posted here recently is simply beautiful! I’m very proud to be associated with the talented and generous people on this forum.
Attached is a slide show of a Saddle Bag-Holster combination I’ve just finished. Unlike the last set I posted, this set was made from unfinished leather. The gusset was made from 4-5 oz. leather and the rest of the piece from 8-9 oz. leather. I had some problems with dyeing the leather on this project. I used Skidmore’s for the final finish and that helped to cover up some of the flaws. The bag was sewn inside out. I was worried that I would not be able to turn it due to the stiffness of the leather. I soaked the bag in warm water and was then able to turn it right side out. I learned a lot from this project.
http://s278.photobucket.com/albums/kk81/jvsaffran/saddle%20bags%202/?action=view¤t=81692cb2.pbw
-
Johnny,
Great job on the bag/holster combo...
-
That's really cool Johnny, I've never seen anything quite like that. I wonder if the Harley was able to make the trip to Florida? In any event, it sounds like you had a great time. Good to hear from you,vJD
-
Welcome back, Johnny. Good to see you with us again. That looks good. I like the stitch line turned inside. You drape that across the gas tank or the seat? ;D
-
Many thanks for the kind words Pards.
Marshall,
It lays right across the gas tank and my Sharps is lashed to the handlebars. Never know when I might spot a stray Buffalo on the way to Sturgis.
JD,
I wish I could have taken my Harley to Florida. It will probably be April before it gets used again. By the way, I sure like your new profile picture.
-
:D ;D Howdy Johnny
Will Pard it's good to have you back, I know you had a great time with the family, your saddle bag and scabbard came out great, I'll be talking to you soon.
tEN wOLVES ;) ;D
-
It lays right across the gas tank and my Sharps is lashed to the handlebars. Never know when I might spot a stray Buffalo on the way to Sturgis.
That's hilarious. :D
-
Hey Johnny, next time you head to Sturgis, head south a little to Custer State Park Wildlife Reserve. Last time my wife & I rode through it, we were stoped by a head of 1000+ head. They walk right past you, almost crowding you off the bike. Fun. Picture taken from my Harley, too close for comfort. Makes me want to buy some buffalo hide.
-
Me and a buddy went to the Mt. Rushmore 10 years ago, road trip to get a picture picking Washington's nose. Don't know why the wife wouldn't go. Anyway on the way back we went through the badlands, saw some buffalo down a dirt road we took. Came back to the main road and pulled into one of those tourist stops and told the Park ranger where we had seen the buffalo, several in fact. Thought it would be nice to tell families where to see one. He gets all nasty tells me that he doubts I saw a buffalo as there are only 800 in the whole park, he told me I saw a cow. Well, not one to pass up a bad attitude, I returned in kind, but I was louder. When I went to the bit about the hippie cows I saw, cause the needed a haircut, he stomped off and we told these two families how to get where we were at. At the end of the run through the park, we ran into them again. THey had stopped back to tell the ranger what an idiot he was and thanked us for some great pictures, of the hippie cows. Look just like the one JD saw.
-
Back in 97' (1997 that is) while cruising through Yellowstone NP along the Yellowstone River, I had to stop for a herd of a couple of hundred Buffalo that were crossing the road. I kept my distance but some of the people got too close IMHO.
-
Herds of buffalo and not a one of you report that you roller skated! What is this old world coming to?? ??? :o ;D ;D
-
Well, it's been a while and it took me longer than it used to, but here's a pair of cowboy cuffs I made to go wih the new black rig I made for myself a while back. Maybe next month I'll feel like showin' off at the shoot!
-
Howdy Kid
That's a great lookin pair of cuffs.
WC
-
Nice cuffs Kid. Maybe you need to make some for that horse in your avatar, help him stand up straighter ;D
-
Howdy Kid,
I love those cuffs :o :o They are AWESOME!
Thanks for sharing!
ACE
-
Howdy Kid
Nice work Pard, you're going to look good wearing those ::) :o 8)
tEN wOLVES ;) :D ;D
-
Nice cuffs, Kid. I like the conchos on them. You can show them off in style. Thanks for the pic.
-
Kid
very stylish cuff i like the pattern ive been looking around for a pattern i like but not sure what i want yet lol
anyway great job
Cowboy316
-
Good looking cuffs Kid nice work thanks for sharing.
-
here the knife sheath i finished today
-
Nice sheath, pard. Good molding so it fits right. Thanks for the pic.
-
::) :o Nice work Pard, you're coming right along. :D ;D
tEN wOLVES ;) :D ;D
-
Howdy Kid,
Real nice Job on the Cuff's! If it were me, I would show them off at a shoot the first chance I get. Many thanks for sharing this with us.
Howdy Cowboy,
That's a good looking Sheath you made there! I like the molding job you did. Many thanks for sharing this with us.
-
Howdy Cowboy
That's a nice lookin job on that sheath.
WC
-
Howdy all
Here is a sheath I did yesterday for a friend of mine. He made the knife.
WC
-
Great sheaths, guys. Knives are terrific, too.
-
Howdy all
Here is a sheath I did yesterday for a friend of mine. He made the knife.
WC
Howdy WC
That's a nice looking sheath, your friend should be real happy getting it, those spots look like there copper, are they?
Well done Pard
tEN wOLVES ;) :D ;D
-
Howdy WC,
Beautiful job on the Sheath! The spots look great. Thank you for sharing your talents with us.
-
Nice sheath, WC. I like the line of spots to make it interesting. Good molded fit. I see the loop folded forward to show the finished side. Looks good.
-
Looking good Cowboy very nice work on that sheath.
WC very nicely done pard,
Thanks for sharing
-
Howdy TW
Yes they are NOS copper spots.
WC
-
Well, I go away and get busy for a while, and I get to come back and look at sheaths, cuffs, and all sorts of awesome stuff. Really nice to see! Bravo ya'll!
So, here's what I've been up to lately. If they look familiar, it's because I asked David Carrico to click me a few, and for the right jingle, he obliged kindly and I must say if ya'll ever are in need of anything of the kind, David's one of the nicest most approachable folks you'll ever want to deal with.
My pardon to David for not working these out quite to his quality, but these are the best I could do.
I still have to slit the leather and put the outside button holes in them, and edge them, but I figured while I was takin' pictures I may as well snap a few of these.
Hope ya'll enjoy them!
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_13041.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_35040.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_17480.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_102198.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_36137.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_31326.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_11546.jpg)
Hoka!
-
hey Thunder
very good lookin pair of straps im gonna have to make a pair for mine some day when i get more leather
very nice thanks for the pics
Cowboy316
-
Did ya'll see Chuck's sheath and knife combo? The guy's on a whole 'nother planet as far as capability goes. Just a wowser!
-
ya Thunder i saw it that man is incredible when it comes to leather work as soon as i get some money im buying his videos and just might have to take a trip to Durngo Colorado this summer and see him LOL
Cowboy316
-
Howdy RT
Will cowboy your work reaches a new level every time you post a new project, well done pard, they're beautiful. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Howdy all
Here is a sheath I did yesterday for a friend of mine. He made the knife.
WC
I'd like to know what the asnwer is to the previous poster's question ... are those copper spots? Very neat touch and it looks good with the color of that leather!
-
TW - Thanky!
-
Howdy RT
I did, you just missed it postin those good lookin straps.
They are NOS copper spots.
WC
-
They are NOS copper spots.
Those really look good. Copper has a nice color to it.
Those straps are great, Rt. Your makers stamp looks good, there. Keep it up.
-
I agree with the Marshal (hey, in the old west, it was the only way to keep from getting shot -- agree with the fella with more firepower).
Those copper spots are really a nice change of pace over nickel, brass or antiqued. Good choice there!
-
RM,
Those are so AWESOME looking straps, very nice design work! And you are 100% right about David C., he is a super nice guy, and when I was over there he was realy helpfull to me. He has a AWESOME shop!!! And he will help anyone that needs help!
You all been doing some great work!
Thanks For Sharing!
ACE
-
Howdy RT,
Beautiful job on your Straps! Excellent job of stamping and workmanship! Many thanks for sharing this with us. We look forward to seeing your next projects.
-
RT those are some mighty purdy spur straps pard I really like your makers stamp also great work.
-
Howdy All
I just made this today. I didn't have a good watch other than my pocket watches so I bought this one
this morning and just finished the band.
WC
-
Wow WC thats really cool i would have never thought to do something like that
what stamp did you use for the backgrounding on it its not like any backgrounders
I have
looks good keep it up and ill stay inspired to keep going LOL
Cowboy316
-
Howdy
Thank you.
It is the small pebble stamp from Hidecrafter, #PA003
WC
-
Thanks WC im gonna go order one right now LOL
CB316
-
wow, that's awesome WC!! I too never thought of making a watch band, it's also not a bad starting out leather project because of the size makes the costs lower too!
awesome job, really first rate!
-
Howdy All
I just made this today. I didn't have a good watch other than my pocket watches so I bought this one
this morning and just finished the band.
WC
Howdy WC
Beautiful watch band, the tooling is really sharp. ::) :o 8)
tEN wOLVES ;) :D ;D
-
WC
would that hide crafter pebble stamp PA003 be comparable to the tandy's E294-04????
Cowboy316
-
That looks really good, WC. I like the way you did that background to set off the tooling. It really works nicely, pard. :D
-
Heres a knife sheath i made for one of my small hunting knives
-
:) :D Nice work Cowboy 316, I like your design, stamping and color, it looks good Pard. :o 8)
tEN wOLVES ;) :D ;D
-
Thanks TW i dont think if it wasnt for ynou group of guy that my interest in leather would have been fired back up like it has and all i can say is thanks guys for the encouraging words and compliments and the tips on different things
Thanks
Cowboy316
-
That fits your knife nicely, CB. Good work. :)
-
RT, those are some really clean straps and I like that makers stamp.
CWC, as always you come up with something new and great for us to look at. That is some good carving.
CB316, I like the way your sheath outlines the knifes shape. That is a really nice touch.
As always, you guys are an inspiration. Thanks for sharing with us.
-
Thanks TW i dont think if it wasnt for ynou group of guy that my interest in leather would have been fired back up like it has and all i can say is thanks guys for the encouraging words and compliments and the tips on different things
Thanks
Cowboy316
Howdy Cowboy 316 :D
Thanks for the kind words pard, you know we're all here for one another, to support and help one another in any way we can, You're right this is a great bunch of Pards for sure, and we're happy to have you ridding with us, you are making a lot of progress in a short period of time, you keep up the good work. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Neat looking strap, CWC.
Problem is, if I had a strap like that, I'd be worth more than my watch.... ;D
-
WC
would that hide crafter pebble stamp PA003 be comparable to the tandy's E294-04????
Cowboy316
Howdy
Not the same but would work and look good.
WC
-
Neat looking strap, CWC.
Problem is, if I had a strap like that, I'd be worth more than my watch.... ;D
Howdy Dave
Mine too. $18.00 @ Wallgreens......
WC
-
WC,
that is a cool watch band!!
Cowboy,
Nice looking knife sheath!!
Keep it coming guying!!
My little brain has frozen up, and I cannot get ??? ??? maybe, if you guys keep making that awesome stuff, I will thrawed out!
Thanks for sharing!!
ACE
-
Howdy WC,
Beautiful work on the Watch band! The intricate detail and workmanship is excellent. A work of art!
Howdy Cowboy 316,
Very nice job on the Sheath. It looks well made and should last a long time.
Many thanks to you all for sharing your work with us.
-
Here is another practice holster I just completed. It is for my 1873 SAA with a 7-1/2" barrel. It has been dyed with Feeling's Dark Brown Professional Oil Dye.The final finish is Skidmore's.
-
JM,
AWESOME, is the word that comes to my mind, i have been tossing and turning, wheter or not to make that style of bucket, I like it!! :) :)
Now that you have shared that with us, I might get the mental block gone, and make something!!
Thanks johnny
Ace
-
That looks good, Johnny. I like the rosette made with the border tool. The dark brown really does well with your amount of coverage with stamping. Thanks for the pics.
-
Howdy Johnny
Great looking holster, I like the stamping the color and the neat rosette, the spots are like icing on the holster or is that cake either way, you did good pard I really like it. ::) :o 8) This holster has a nice bold look to it.. :D
tEN wOLVES ;) :D ;D
-
Many thanks for the kind words. I would not have been able to do any of this without the inspiration, encouragement and help from everyone here on this forum!
-
Hey Johnny, VERY nice work. Every about it is great. I especially like the color.
-
Spot on there, Johnny! Man, is that color rich. Practice holster? Waddya kiddin'? :D
-
Morning Johnny. I only had time for a quick comment last night. I agree with Santee, practice holster? You must mean it's the holster you'll practice shooting with!
It does not appear that you lined this one, is that correct? What weight leather did you use?
Like Will said, the Rosette you made really looks great.
Did you wet mold it? If so, before or after you dyed it?
I just glued a filler strip in a test holster last night. I'm not stamping it, just trying to find the right size-shape for my Rugers. I will wet mold, and dye it to get some color & finish experience.
Thanks for sharing your work, JD
-
Howdy JD,
This holster is fully lined. It is made from two pieces of 5 oz. leather cut from the same hide. The pieces are laminated together with Barge Cement. I wet molded this holster after cutting, stamping, dyeing and sewing it. The pistol is wrapped with Saran Wrap. The Holster is immersed in warm water for ten minutes. I leave the pistol in the Holster for around an hour and then it let it dry thoroughly before doing the final finishing. There are probably some better methods for wet molding but this seems to give me pretty good results.
I call this is a practice Holster in the sense that I'm still experimenting and learning different techniques. I need to make a new rig for myself for the upcoming season and I'm still a bit unsure on exactly what I want. I'm leaning towards Slim Jim's again because of the ease in holstering them. I'm also thinking of a cartridge case instead of bullet loops. That way I can use it for various calibers.
I gotta' tell ya..... all of this planning and thinking about the next project is a lot of fun for me. In addition to the tremendous satisfaction in building one's own gear, you can make something that is exactly what you want.
-
Thanks for all this info Johnny. It didn't look like you stitched across the top, which is what I usually see when people line their holsters. So, one of two things is going on. Either I can't see the stitching, or, you didn't stitch all of it, but relied on the glue. Either one is OK by me, I'm just trying to learn here!
I just reread the Wet Molding thread, and it's interesting to see the variation of practices concerning water and how long people put their holsters in it. You would be at the high end, with ten minutes, whereas some guys are talking about 10 seconds!
I also went out to the shop and looked ay my holster. It's still too wide across the top. I want the trigger guard to rest on the back edge, but I've not accomplished that yet. I'm using real cheap belly leather to mock these things up, and I can use the practice cutting, so it's not a waste.
I'm taking my wife to the beach for a couple of days after church, so I won't be working on anything until maybe Tuesday
evening. Sort of a Valentine's Day-Early Anniversary deal. 32 years, where does the time go?
Thanks agan Johnny for sharing your time and experience. JD
-
Howdy JM
Keep up the great work.
WC
-
I slapped the handles on this made-by-one -of-my -buddies blades...big ole honker, 12 1/4" O'all...I made the sheath.....
[Lost links deleted by moderator]
-
Looks good, RB. Clean and crisp. That's a good color for it. The knife is nice, too.
-
Rayban,
I'll second the Marshal! Looks real good!! ;D
-
::) :o 8) Howdy RayBan
Beautiful Knife sheath Pard, nice clean and professional look to it, I like the color and the high lights, looks like a keeper ;D
tEN wOLVES ;) :D ;D
-
RayBan, that is a very professional looking sheath it compliments the knife perfectly. Johnnie if that is practice you are going to knock our eyes out when you get the final product.
Hey, JD, congrats on the 32 years, she must be a pretty special lady.
-
Mighty fine edges on that sheath, too.
-
Howdy RayBan,
Beautiful job on your sheath! Very clean looking with excellent workmanship! I like the design of the tip.
The knife handle looks great. Many thanks for sharing this with us.
-
Thanks for the kind words...I wish it were a keeper but actually it's a donation to another forum. A build-off contest of sorts, the winner does not win squat, and all the knives are put up to raffle and the proceeds go to the forum.
Like a puppy dog tho, I've become rather attached to this one, and I plan to make one for my own self. ;D
-
Rayban,
I'll have to agree with the gang, AWESOME nice style clean net, and good color!
Thanks for shareing!!
ACE
-
I likes it. Good job.
-
Howdy Pards,
I normaly don't post up here, and this is a re post! I am posting my Latest project, The Should Holster I made for a man in Colorado! He emailed me to day to tell me home much he loved the rig, He said he couldn't believe the color match , he said it was perfect, he also couldn't believe how well it fit the gun, his words were it fits like a glove! I have all of you to thank for this feeling You all took me in, and helped me in any way I asked, and I thank you for that!!
I was a nervous wreck because I had never done a natural oil finish, and to match a 10 year old rig! My Mentor, TW settled me down and walked me threw it! I have meet so many good people on here, and some have become very good friends. And one thing I have allways said was you never can have enough good friends!
So I am kinda tooting my own horn here, but it would never been possable without you folks!
And I Thank You!!
ACE
-
Well, you earned the toot, pard. That does look good. Thanks for sharing that with us.
-
Way to go Ace!! It really does look good!!
DM
-
Howdy Ace ;) :D ;D 8)
Well you did good Pal, I'm happy your customer likes his new shoulder holster made by ACE the leather man, WELL DONE for sure... :D ;D You make me PROUD.... ;)
tEN wOLVES ;) :D ;D
-
Howdy Ace,
Great job! You deserve a big pat on the back. Many thanks for sharing your work with us.
-
here it is guys the bone saw sheath i finished yesterday
its what ya call a mexican loop i guess ???? but there it is
sorry bout the blurry pics but all ive got is my cell phone right now
Cowboy316
-
Cowboy, that looks pretty darn good! Nice work!
DM
-
Nice, CB. It looks like a good item. I like the Mexican loop with the stamping you did.
-
Cowboy, Like MW. said I like the way you did that, that gives me a project to work on! Little stuff like that , i can get away with work on the back porch, with out getting into a lot of trouble!
Thanks a Bunch for sharing!!
ACE
-
Howdy Cowboy,
Great job! I like the design and stamping. Did you wet mold this Sheath?
Many thanks for sharing.
-
Congrats, Ace and CB!
-
Nice work Pard :D
TW ;) :D ;D
-
Johnny
i didnt wet mold it at all the saw blade lated flat enough that i didnt need to but id did dampen it a bit to fish it threw the loop
and thank you everyone for the kind word they keep me inspired
Thanks
Cwoboy316
-
Been out of town for a few days away from the computer just scanned through all the fine leather work. Like Cowboy's sheath, and Johnny's holster, RayBan's knife sheath and Ace's shoulder holster. It all really looks great pards there are some talented leather workers on this forum.
-
Thought I would finally put up some pictures of the rig I recently made for myself. This was my 1st attempt at floral carving holsters and I was happy with the results. I prefer only using one gun belt so I buckle mine in the back so I can have as many shot shell loops as possible in the front. I used thicker leather than I have previously for the loops and riveted them to the belt as opposed to stitching. I wet molded the double shell loops and they are as snug as one could hope for.
(http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig001.jpg)
(http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig002.jpg)
(http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig004.jpg)
(http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig005.jpg)
(http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig006.jpg)
(http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig007.jpg)
-
That rig looks right fine, Seth. I like the two-tone work with the tooling. Those shotgun loops look like they'd work well. Nice touch to mold the center of the loops to fit the shells. Good work.
-
Nice work Seth, you did a good job on your carving and tooling, this looks like a rig that will work well for you, you did well also with your design, and you shotgun shells should work great the way you have them. 8) WELL DONE PARD
tEN wOLVES ;) :D
-
Very nice. I like the rivets on the loops. Remind me of brass spots! Nice work on the carving too. DM
-
Very nice looking rig, great tooling too. I'm curious what you're doing to post so many clear pictures. I wish more people did it that way!
-
heres a bone saw plus knife sheath combined i got the idea from a pic i saw online
heres my version of the sheath
-
Howdy Seth,
Beautiful work on your two gun rig! Excellent design & workmanship! Neat job of molding the shot-gun loops!
I would be curious also as to how you posted your pictures.
Howdy Cowboy 316,
Nifty design on your Saw & Knife combination! Great job of stamping!
Both of the above projects are perfect examples of the advantage in making one's own leather gear.... you can incorporate your own idea's into something both unique and practical. Many thanks for sharing this with us
-
Nice idea, CB. Good combo for those two tools. Looks good. Keep 'em coming.
-
Seth, great looking rig I like the carving, the two tone color and the way you molded the shot shells, That should really work well. Thanks for sharing.
Cowboy you just keep on keeping on good looking leather work pard. Thanks for sharing.
-
Good looking stuff, guys. Seth, can I have the guns?
-
Howdy All
I just finished a holster for a S&W Lemon Squeezer, so here she is.
tEN wOLVES ;) :D ;D
-
Man, you do NICE work! Everything about that holster is first rate. I am assuming the finish is oil of some sort left in the sun for a while. Thanks for sharing!
-
Well, that sure looks good, TW. Nice work. I like the close trimmed skirt. The tooling fits it nicely. Thanks for the pics.
-
TW
very nice work like the stamp on the keeper loop keep up the good work
Cowboy316
-
WOW!! Simply gorgeous!! ;D Great color and carving. ;D
-
Thanks Pards, your kind words are much appreciated
tEN wOLVES ;) :D ;D
-
I like it!!
DM
-
TW, mighty fine leather work there pard I really like the design and coloring of that holster very nicely done. Thanks for sharing.
-
Howdy Seth,
Beautiful work on your two gun rig! Excellent design & workmanship! Neat job of molding the shot-gun loops!
I would be curious also as to how you posted your pictures.
Howdy Cowboy 316,
Nifty design on your Saw & Knife combination! Great job of stamping!
Both of the above projects are perfect examples of the advantage in making one's own leather gear.... you can incorporate your own idea's into something both unique and practical. Many thanks for sharing this with us
Thanks for the compliments fellas, much appreciated. I was quite daunted by the idea of jumping right into creating my own classic floral pattern and doing 2 holsters at once but as I kept being told here, I just went ahead and did it. The rig performed flawlessly in Tombstone at the High Noon at the Tombstone Livery shoot at the beginning of the month. Between the rig and my new pistols and shotgun I cut my stage times in half.
As for how I posted the pictures, I uploaded them to my Photobucket account, then all you need to do is copy the IMG code, here is an example (except when you post put square brackets around the **img** and **/img** codes);
IMG http://img.photobucket.com/albums/v237/DJDace/Gun%20Leather/FloralCarvedRig007.jpg /IMG
Santee if you fly to the San Fernando Valley I'll let you shoot 'em! :) Best CAS investment I made was buying those Rodeo II's from Longhunter ... followed closely by the new Pioneer 12g Coach gun my wife bought me.
-
Howdy Dalton & Wiley
I'm glad you pards like it, it was fun to make, I had a bit of a challenge getting the flower pattern of that old holster, so I did a reverse scratching, and then a new copy of that. Thanks for taking a look see :D ;D
tEN wOLVES ;) :D ;D
-
Howdy All
Got a little behind in my reading (customer orders).
Nice work Seth, Cowboy 316 and TW.
WC
-
What WC said. Work seems to be getting in the way of play ;) ;D
You guys are all doing some great stuff. Inspiration flows like water around here. GB
-
Howdy Ten Wolves,
I echo everyone's sentiments on the Lemon Squeezer Holster... Simply outstanding! Many thanks for sharing your talents and expertise with us Pard.
-
Howdy All ;D
Thanks CowboyWC, Gun butcher and Johnny McMcrae for the kind words and comments, every one here has been an inspiration for me, and I'm learning more and more every day, with leather there isn't just one or two ways of doing things, and that has been the fun part for me, I never get bored, there is something new to look forward to every day, and with all the talent here in the forum, you can't help but be inspired.
A Big THANKS to ALL :D ;D
tEN wOLVES ;) :D ;D
-
That's a cute little holster, TW. Nice work.
Horse Pen
-
I missed 2 days, and i am lost!!
Howdy Pards, :)
Seth nice rig pard!! Cowboy, A1 job also!!!!
TW, My mentor: That L.S. Holster is a Grand Slam!!!!
The greatest thing we have on this forum, is that i: No one on here is trying to out do the next guy!! everyone on here helps everybody, and loves doing it!!! theres not one person on here that wouldn't help someone if they need help!
leather work, like we do, it not easy, my no means! And as far as hobbies, and doing things, i have done a lot!!!!
But I find nothing more pleasing and sastifily than making a leather peice that you have put your heart and soul into, and it turn out pretty good! And then myself, I looked it over and I see things that I will do better the next time! and like I said, no one comes on and said well that looks like crap, and if youy would of done this and that it would of be better! Thats doesn't happen here.
We are family, and we push each other to do better,(us newbies) and you vet's help us newbie's in that way! Before I got hurt, we had a nice group of Bikers, and we have people come up to us, and ask, we don't have Haleys but can we ride with you guys, and we allways said, you bet!! My group would ride with a group of guys from another town once in a will, that they all had new Harleys $1000.00 worth of leather, but couldn't change there own oil or spark plugs, but they were bad a$$ bikers ::) ::) ::) ::)
People like that, i want them in my world!! I am who i am, and I do my best. And you guys, are what keep me going everyday, and I thank you all for that.
keep that leather coming, i love looking!
ACE
p.s. Thanks For being my friend!!!!!
-
;D ;D ;D ;D Thanks Horse Pen & Ace, your comments are always much appreciated :D
tEN wOLVES ;) :D ;D
-
Another home run, WC!
-
Howdy Ace,
Well said Pard! You hit the nail on the head. Thank you for being a part of this. You are an inspiration.
-
Hi Johnny,
I tell things the way I fell! I assume some people take offense to some of my statements, but, if the world was like this forum, can you imagine what a wonderfull place it would be! had to go to Tulsa Yesterday, took my wife and nices to shop! I had bought a dupe stamp and needed to trade it for the one I wanted, yesterday, should be a day that goes done in history! I never spent a penny in there! I had $35.00 that I could spend, so I thought I would try to buy a peice of leather,I couldn't believe that they didn't have any leather worth buying except whole sides, and there wasn't anyway I could buy a side!!! ??? ::)
I guess yesterday just wasn't my day, I had time to kill, so I went to a gun store that I have been going to for 25 years, it was a mad house!! I allways go back to the used reloading area, and under the counter there was a box of range pickup 380's, had a clerke walk buy and ash how nuch, he went and got a book and looked them up, said 5 cents, and ask me how many I wanted, I said 500, so he brung me a box and said that the owner said for me to count them out, that he trusted me! No place to sit, back killing me, i count them out, there was 616, so i tought I would just buy them all! Fininaly got to the counter, I told the guy there was 616 and they were priced to me at 5 cents, he shouted at the boss about them, and he said 10 cents, i just turned and walked out!
You see, that is why I like my Home Right Here!!
You all keep do that beautifull work!!
ACE
-
Well cowboys here is my latest adventure in leathercrafting just finished them this morning. These are my version of Will Ghormley's Jesse James' Rig. They are for my 1875 Remmington's 45 LC.
-
Wiley, those are darn nice! Love the 2 tone look.
DM
-
Wow, Wiley. Two-tone on those looks great. Nice work, pard. Thanks for the pics.
-
Howdy Wiley :o
Top Notch Pard, your flower pattern looks great, and the contrast of the light brown and dark brown are real classy, I see you used a 1 1/2" bullet loop, very authentic, Ya did good Pard. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Howdy
Very good lookin rig. Great work.
WC
-
Pards thanks for the nice comments. Just to echo what Ace said earlier There are a lot of great pards on this forum. I for one learn a lot of good stuff reading these threads. There are some mighty fine leather workers here who are more than willing to share their vast knowledge of leathercrafting. I guess thats just the cowboy way.
Thanks again
Wiley
-
Wow Wiley,
That is one GREAT rig!! ;D Be real proud of your work!!
-
Beautiful Wiley, That rig ought to turn some heads. Great work.
-
What a pair of lookers Wiley! Inquiring minds want to know the details of the color-finish process. I would love to be able to put something together like that.
Thanks, JD
-
Howdy JD, well the dark color is Fiebrings chocolate dye and the light is EVOO and good old Texas sunshine. I rubbed the whole rig down with a light coating of Montana Pitch-Blend leather oil and conditioner and then lightly with Pitch-Blend dressing and more sunshine, the semi-gloss was done with multiple coats (four) of Leather balm/ atom wax. Between every individual application of each product was vigorous polishing with a soft old tee shirt. will see how it all works out over time. Thanks for asking.
Wiley
-
Thanks Wiley, I really appreciate the info. I have all the items you've listed, so I'm looking forward to giving it a try. Once again, a really cool look, including the belt! JD
-
Howdy Wiley,
Beautiful job. A lot of care and thought were put into this rig and it shows. You can be very proud of your work. Many thanks for sharing this with us.
-
The two-tone definitely came out nice.
-
Wiley,
I love those Holsters! didn't you mention that you had done leather work before? If not you are one awesome beginner! The carving on your slim jims are excellent :o :o
When the temp gets to 70 I am going to get out in the shop and learn (if it kills me) how to carve ::) ??? ::)
Wiley, thanks for sharing!
ACE
-
Wiley:
Those holsters look great. Very nice job, pard.
-
Hey all you good pards thanks again for all the kind remarks much appreciated. Ace I have been doing leather work for about three years maybe a little longer sure do enjoy it great hobby.
Wiley
-
Wiley,
Awesome holsters, i hope in 3 years, I can carve that good!!
Later
ACE
-
took a class at the tandy shop last saturday and they were making cell phone cases
heres the one i made LOL
Cowboy316
-
That's historically correct if I ever saw it. ;D
-
Snazzy!
-
nice! you could put that on yer belt and no-one would ever notice what was in it!
-
Howdy Cowboy, That is pretty Cool!
-
I didn't know cows could use cell phones, not having opposable thumbs ::)
Nice work Cowboy, that's the first hair on case I've seen. It's always nice to make something unique, JD
-
Real nice Cowboy,
Looks like it will keep your cell phone warm too. :D
Johnny Dingus
-
Johnny
it should stay warm in there
im also in the process of making a bunch more to sell
in the hair on and regular leather
Cowboy316
-
You might be on to something there Cowboy. Good work I like it thanks for sharing.
-
Lots of nice and original work recently - sorry I don't offers kudos more often, but recently I don't her much until the wee hours of the morn and by then my brain and fingers ;D are on hold.......
I go this one done - a a bit different - the gent like the looks of one of my late 18th/early 19th century belts and decided he wanted something different in a gunbelt to go with the 1880's Mex loop holster I built for him a few years ago - double D buckles like this were used up through the 1830's and the tooling pattern is 18th/early 19th period, so I wasn't sure how the mix would "fit", but after adding some ctg loops and a few well placed spots I like it despite the anachronisms..........anyway here 'tis
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-sheets-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-sheets-2.jpg)
-
Howdy Chuck,
I like it. In fact, I am working on something similar but with brass spots. I'll show ya when I get it done. The early buckle doesn't bother me none. Nice incised geometric design accented with the spots on the belt too. How wide of a belt is that?
Horse Pen
-
Wow, Chuck.....
BTW, did you find those #13 rivets you were looking for? Those look like 14s.
-
Dang nice, Chuck !
MD
-
Don - it's 3" with a 1 1/2" buckle
Skeeter - I did find someone who carries #13's, but haven't ordered any yet - means I'd have to also order one of Bob Douglas's setting tool sets and that's a bit pricey right now (bill due and all that) - these are #12's which I've been using mostly except of exact replica stuff
Mike - thankee! check out the two post of the PH Posse I just made......
5 hours sleep in two days and still going strong - LOL! maybe I should quit drinking my coffee dye! Last batch ate my stirring spoon.... ;) ;D ;)
-
Thanks for sharing another inspiring work of functional art Chuck. I know you don't post for the "glory" here, but I sure do like lookin at your work. I've got to get my Packing Iron back from a friend and do some more studying on how things looked back yonder, as my grandmother would say. JD
-
Howdy Chuck,
Another work of art from your workshop! Many thanks for sharing.
-
wow Chuck, yet another beautiful piece of art!
as a man I looked up to once said:
"we all have our canvas, some paper... some metal... some oil, mine just happens to be all of the above." Boyd Coddington
-
Just terrific. Do you use an oblong punch to create the space to thread the bullet loops through?
-
Beautiful work Chuck,
The coffee stain looks like it has black highlights, could you tell us how you do that?
To me it looks like it has a Spanish influence.
Thanks for taking the time to post it.
Johnny Dingus
-
Howdy Chuck, ::) :o 8)
AWESOME looking rig Pard, it's easy to spot your work anywhere, your the only one I know of with this style, the detail and time you put into your work is really something, Thanks for sharing your work/ love with us Pal. ;D
tEN wOLVES ;) ;D
-
That looks great, Chuck. The buckle works nicely with the design. As a match for the holster, the color is right and the spots pull it all together. Well done, thanks for the pics.
-
Thanks and glad ya'll enjoyed the looksee
Santee - yes I use 1" bag punch and then cut the strip to a heavy 1" - when I set my strip gauge I set it just to the right of the line...
Johnny - The coffee stain looks like it has black highlights, could you tell us how you do that? - it wasn't a simple coffe stain, but a combo effort - I applied the coffee heavily, allowed to half dry and then used a mix of walnut and vinegaroon (about 70% walnut and 30% vinegaroon, but that's just a guesstimate - Like my Grandma's cooking I'm a pinch of this and a dollop of that kind of guy.
I let the walnut/vinegarron set for just a bit, maybe two or three minutes and then wiped it off. Then I let the whole thing air dry to about half dry and added a coat of my home made dubbin - EVOO and lard mixed about 35/65. Wiped off the extra and let dry completely. Then I aged by applying a well rubbed in aot of Neatlac (hate the smell!) and then bending, etc to get some wrinkles and a bit of surface crackelure. Added a coat of Mt Pitchblend rubbed in well.......that's the best I can remember - I yeah also set it in the sun....the finish alone took about a week of fussing around and reworking until I got the look I wanted..
BTW - I've got pretty good handle on what happens when I mix and match, but still get "surprised" by the outcome - sometimes good and sometimes not so good (my garbage bin is full of those!) so it's best to experiment on a piece of the same leather you're using for the finished piece.......different hides react differently as does different batches of dyes, both commercial and homemade - use a piece big enough to get the whole effect
I also re-did the finish on the holster - here's how it started out.
(http://www.wrtcleather.com/1-ckd/1-gallery2/Holster-1880s-Montana-Double-Loop-001.jpg)
and after.....
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-sheets-1.jpg)
I know you don't post for the "glory" here, but I sure do like lookin at your work.
JD - thanks for understanding, as my main "reasont" in posting is to perhaps offer inspiration to others as others who have come before have inspired me and in the way others, including the "new guys", still continue to do........
-
Thanks for the before and after pics, Chuck. The end result has way more depth to it. Nice improvement to the original finish. :D
-
Howdy Mr Chuck,
:o :o :o AWESOME, AWESOME, AWESOME!! I flat love the look!! the first finish was just to brite for a period Holster like that!!
And if you think about it, In the cowboy Days, people didn't look at your belt as much ,as they looked at what the gun was in!! :o 8)
By redyeing you give it the Chuck Burrows look, it also toned down the spots! I like the belt also :) i think it is very classy, with a simple spanish flare!
I apoligies for I am at a lost for the proper words, other than it is Classic Chuck Burrows!
I wished it would warm up, for when you display peice like that, it makes me what to go put what little brain I have to work!
Thank you for sharing!!
ACE
-
Very beautiful CB!! Your work does inspire me. I use some of it as wallpaper on my computer sometimes for a change.
DM
-
marshall's right Chuck, great job and nice revamp on it... takes it to a whole extra level.. not that I could compete with the first level anyways.
any chance you have a scrap of that leather so we could see what color it was before the dying process? also do you use a smooth side and then the texture just shows up after the dying process or is it more like a suede beforehand?
-
Very distinctive and different. Very nice as always, Chuck. And your finish work is superb.
-
Ok pard you all probablly been wondering what the big seceret project is
Well this last sunday i took a carving class at my nearest tandy shop and the
guy that did the class come to find out is the one that does all the tandy
catalog covers ;D and the project was a simple wallet with the buffalo head
from the catalog with the same design floral pattern with it ive got it to the
point where i cant hold out any longer got to show it to some one LOL so other
the tan coat and putting it all together here it is enjoy ;D
OH OH OH OH by the way did i forget to mention that this was my fist attempt
at figure carving LOL
Cowboy316
-
That looks great, CB. Good, consistent tooling. Smooth curves. Nice work. You have reason to be proud of that one. Thanks for sharing it with us.
-
Cowboy, AWESOME! man AWESOME! You ought to be very proud of that effort.
Thanks for sharing your work, most excellent, JD
-
Cowboy,
Wow! Beautiful.....work.
Now you can teach us how.
Thanks for posting picture.
Johnny Dingus
-
thank you Marshal and JD i was excited bout how it was gonna turn out after i had it carved i didnt
wanna do any more to it LOL but as the day progressed the more and more i liked it ;D and to be honest
i think and one that has a chance to meet and take one of Jim Linnell i highly recommend it he is a real down
to eather guy and more than willing to help with the smallest little thing and his classes are a ball
Cowboy316
-
WOW!! ;D That is one FINE carving job! Looks like you have talent there! Keep it up! ;D ;D
-
marshall's right Chuck, great job and nice revamp on it... takes it to a whole extra level.. not that I could compete with the first level anyways.
any chance you have a scrap of that leather so we could see what color it was before the dying process? also do you use a smooth side and then the texture just shows up after the dying process or is it more like a suede beforehand?
Willie - I'll try and get to this later today........
cowboy 316 - you did one fine job! IMO figure carving is some of the most difficult tooling there, especially to get the critters to look real ! Two big thumbs up!!!! ;D
-
Ok pard you all probablly been wondering what the big seceret project is
Well this last sunday i took a carving class at my nearest tandy shop and the
guy that did the class come to find out is the one that does all the tandy
catalog covers ;D and the project was a simple wallet with the buffalo head
from the catalog with the same design floral pattern with it ive got it to the
point where i cant hold out any longer got to show it to some one LOL so other
the tan coat and putting it all together here it is enjoy ;D
OH OH OH OH by the way did i forget to mention that this was my fist attempt
at figure carving LOL
Cowboy316
Howdy Cowboy
" WOW " what a beautiful job you did, and your first carving/tooling ta boot, your a natural for sure, you keep this up and you will be up there with the top guns in no time Pard, heck it looks like your there now. ;D keep up this great work, and I can see why you're so proud of this. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Cowboy, great carving job! Sure wish I had the patience and the eye to carve like that, keep up the good work and thanks for sharing.
Pokey
-
TW
ive been tooling and carving leather since i was nine or ten years old i had just never done any of the animal carving like the buffalo head thats on the wallet but during the class i felt like it was my first time cuz some one actually was teaching me what to
do and was showing us as we went alongso ya you could say it was my first time LOL
but no fellas ive enjoyed it here and you guys are just full of great ideas cant wait till i can get to some bigger and better stuff
Thanks for all the kind words
Cowboy316
-
Howdy Cowboy,
Beautiful work! I'll bet you can't wait to make a Holster with the techniques you have learned. You have inspired me to take a class in carving. Many thanks for sharing this with us.
-
Cowboy, I've taken three classes from Tandy in carving. One was the traditional flower & stem that's been around for ever. The second was an oak leaf sun glasses holster. The third was a flask with lots of swivel knife cuts. Neither the flower or the leaf came out anywhere close to yours in quality. I had better luck with the swivel kinfe cuts.
Chan Geer is headed our way again this year, around October, for a three day class. This time I will be there!
Keep on Cuttin! JD
-
Cowboy316 :o :o,
AWESOME, I love it!! Get job!!!
Thanks for sharing, the buffalo looks so good!!
Kept sharing!!
ACE
-
Howdy Cowboy
You did a great job.
Jim is a very good instructor.
WC
-
Lookin' good, Cowboy. Nice job.
-
here is the finished project all assembled and laced with some close up of the tooling but they arent very good
Cowboy316
-
Howdy Cowboy
Very nice job on the wallet. Good carving.
WC
-
hey guys these pics are one of many cell cases ive got sold already LOL Ill have my new ASB brand swivel knife before i know it
and by the way tandy has the 129 dollar knife on sale this month WOOOOOO HOOOOOOOO for 80 buck
Cowboy316
-
Very nice work. It looks like you got spot setting down pat!
-
Good looking wallet, pard. I like the black lacing with that tone of brown. Cool cell holder, too. Nice work.
-
here is the finished project all assembled and laced with some close up of the tooling but they arent very good
Cowboy316
Well cowboy, I think most of us that have looked at it think this is a fine piece of work and you should be very proud of it.
You just got to get used to the idea that you will be your own worst critic.
Johnny Dingus
-
Well Cowboy316, if you don't think your carving is any good, then I am not even going to try!! I figured if I got started carving I might be that good in about 3-4 years, but if your carving isn't up to standard or above, I am not goig to even try!!
I think your carving is AWESOME!
ACE
-
hey guys
i have found a few laws in the wallet but mainly i was clear bout what wasanst very good LOL
i was talking bout the pics cuz im using my cell phone to take and post all my pics sorry for the
miss undderstanding LOL
Cowboy316
-
You fellas are better leather craftsmen than you are photographers. Some right fine work there in the leather department.
I'd be as happy as a puppy with two peters if I could do either leather work OR photography.
-
Well, here we go, my first holsters and belt. Needless to say, it didn't come out like I'd hoped for, but then who get's the very first one nailed? It was a learning experience, all the way around.
I'm thinking the dyeing-finishing process is the most difficult thing at this point. Even though it's pretty messy, the experience was great. I know a whole lot of things I won't do next time, and there will be a next time!
I probably rushed it a little, because I want to use them tomorrow.
Thanks so much to everyone who shared their thoiughts and experiences with me. Every one of them was valuable.
God bless,JD
-
;D ;D Well done Pard, you got nice color, and it looks great, you can be proud of yourself ::) :o 8)
tEN wOLVES ;) :D ;D
-
JD,
I gotta agree with Ten W., GREAT job. Ya kin be proud of them. ;D
-
Howdy JD,
You have done a great job!
Tomorrow when someone asks where you got your rig, you can proudly answer "I made it myself".
-
JD you did a fine job and I'm betting you're not the only one who finds dying/finishing the hard part (for me it;s teh fun art - most of the time - there are days! >:(
Needless to say, it didn't come out like I'd hoped for, but then who get's the very first one nailed? It was a learning experience, all the way around.
Got a chuckle out of this I'm on my mumbldey mumbledy thousandth one and I'm still scratching my head when I'll nail it.....Got a friend that's been crafting leather since 1947 and has built over 12,000 knifesheaths alone and still reckons he's learning......... ;D
As one of my early teachers once told me - "son it will take you 6 months to a year to learn the basics for just about anything, but it will take you the rest of your life to master all the tricks of the trade and the day you think you have is the time to go take a look in the mirror!""
-
very snazzy rig ya built there JD id be pleased if my first rig came out like that and everyone is right its a learning process all the time ya never get to where ya kniw it all but anyway I love the look and the finish turned out i like that color on that style rig
Keep up the good work my friend
Cowboy316
-
Here's my latest - been doing a few more "conventional" cowboy rigs recently...
Its' a SW style single loop holster and money belt with conchos, all in a "rusty" brown (which doesn't show up all that well in these pics) - it's the color some of the old black dyed leather would turn after a few years out in the weather, in particular the hemlock tanned gear........
-
Chuck,
That's one mighty fine looking rig!! ;D ;D I really like the "rusty" black colour!! I have some very early Doctors saddle bags that are just that colour!! Thanks for sharing the rig and the colour!! Kinda like the Brit. spelling there! ::) :o 8)
-
JD, congratulations. We've all been rooting for you. I'm really happy it turned out so well. Guy, the tension was getting to me.
Chuck - beautiful.
A technical point, Chuck: does leather shrink a little when dip-dyed? I made two identical holsters and dip-dyed only one. It seemed a tad smaller to me.
-
Wonderful jobs, fellas!
-
Howdy Chuck,
Beautiful work! Thank you for sharing your talents and expertise with us.
-
;) :D Well you did it again Chuck, BEAUTIFUL work Pard, your the master of making something new and making it look like it just stepped out of the 1800's, well done for sure. ::) :o 8) I'm going to have to try your 60/40 mix of Walnut dye and Vinegaroon, and see if I can com up with this color, I really like it, it has a quality about it and at the same time looks old and used , but like you say " Well Kept "
Chuck I was wondering about the concho's, because your fastening them to thinner leather, do you nip a little off the stem to get a better fit, or would that ruin the concho, the way you have them mounted they look to be very flush to the leather, I assume your using rivet back concho's.
tEN wOLVES ;) :D ;D
-
Cowboy 316, you're leather caving is really looking good as well as you're over all leather working skills.
JD, pardner you can be proud of that rig it turned out really good, great job!!
Chuck, you're leather work is truely in a class all it's own everything you do is collector quality. Beautifully done!
Thanks all for sharing
Wiley
-
You miss a Saturday by going and putting on a match and you miss all the posting here.
JD that is a Beautiful first set. The color is right on. Yeah maybe a few things you learned but real nice. One thing I kind of do since I don't have unlimited resources. I make a good looking brown belt that will go with a lot of differnt holsters. Then all I have to do is make new holsters and can change them out on one belt. I do the same for my black belt. Now if I had more room and money..... ;)
Chuck thanks always for your postings...the pictures are always inspiring and the wisdom well it comes at the right times.
Johnny Dingus
-
Nice job on that rig, JD. Good color for the design you chose. You can tell us how it performs after you get done today. I can hardly wait to see your next project.
Darn good rig, Chuck. Beautiful work. I really like your more "conventional" stuff. There's a good balance between the open leather and the accents.
Thanks for your pics, pards.
-
Will, it worked just fine. I got a lot of positive feedback about it. there was only two guy who knew I was doing anything with leather, so it came as a surprise. I already have several requests for items, which I will provide for free, just to get the experience.
So thanks to you, Will, and so many others who provided their encouragement and experience with me. You guys really do pay it forward. JD
-
Glad your rig works as you were expecting, JD. Nice that it got some attention, too. Now you're out of the starting gate. Outstanding. ;)
-
Howdy JD
That's a good lookin rig. You got nothin to hang your head about. Keep up the good work.
WC
-
That's very kind of you WC, I appreciate it.
One thing I've learned is to protect the face of the leather from even small marks. Once those buggers are there, you're stuck with them. I used a combo of Lexol and EVOO, then Fiebings Antique paste. It did a good job highlighting the stamping, but it also all highlighted marks I could hardly see before applying the Antique.
I thought about trying to strip it down and start over, but then I thought it would be better to leave it as reminder to do a better job guarding the leather
I'm really looking forward to my next holster project
God bless you guys!JD.
-
Howdy JD
You are 100% right. Wet leather will take mark. I have to keep my fingernails cut real short. Antique stain will make them stand out even more.
WC
-
JD,
For your very first Rig, it is AWESOME! I think you did a excellect job, and can't see why you would be disappointed with it? Your syamping is gteat, your lay out of your holster are super, I say Congrads Jon well Done!
Chuck,
As allways AWESOME, style , color, match of the concho's to style, just a all round Chuck Burrows Master peice!
There sure have been a lot of nice leather goods showing up on this forum! And i think it is great, i hope you all keep the good work up, i realy injoy seeing it!
ACE
-
JD, man you did good. Like chuck said every new project will have its own set of new things to learn. A man told me once that the day you dont learn something new they will be putting dirt on your head so keep learning.
Chuck , your work is beyond words. I hesitate to even try and do what you do.
-
heres the latest 2 cell cases ive done im workin up a design as we speek for the bigger phones like the blackberry curve and others like that
-
Howdy Cowboy,
Pretty Cool! I'll bet you have some very satisfied customers.
-
Cool, CB. Those'll do great. ;)
-
Hey, good job on those cases!!!! Lookin good.
DM
-
Boy, you are the King of the cell phone holders!! ::) ;D
-
Like Ace, I tried my hand at the swivel knife. There's a few boo-boos and choppy areas on this (I tried to do some of it without my spectacles).
-
Tell me if I am reading this wrong, but is 'carving' just like line drawings on the leather, but using a swivel knife?
Or do you actually remove surface leather to get a more 3-D effect? ???
Do you use stampings for shade and effect?
AE, (who's thinking about getting more involved)
-
Angel Eyes, that is an example of Incised carving. It is just the lines cut in. It is an early style of decoration.
The normal carving you see, that is 3D, is a combination of cutting in the lines, then using the stamps to "carve" out the 3D image. No leather is actually removed, for the most part.
DM
-
That looks pretty darn good, Santee. It looks like a lot of your lines are nice and even. Thanks for sharing with us. Be sure to post a pic when it's sewn and ready to use.
-
Santee
Lookin good there pard i really like the pattern would love to have a copy of the carving pattern to play with
but all in all your doing great and like we all say PRACTICE PRACTICE PRACTICE
Cowboy316
-
santee,
Looks great to me!
-
Thanks!
-
Howdy my Friend Santee,
I think you did a GREAT JOB :) :) I had never seen that type of carving 8), Your knife control is absolutly SUPER :o :o
If you don't mind me asking, what blade were you using?
Santee, my Pard thank you for sharing, and with that type of knife control you will have no problem carving anything you want!
Later
ACE
-
Thanks, Ace. I used the steel blade and polished it when it felt like it was dragging (Thanks Chuck Burrows and that great DVD).
Cowboy316, that is one of the tracing patterns Will G. put in the package. That would be the '49er holster pattern pack.
-
Santee, looks good stay with it.
Wiley
-
Santee, that is good looking work. Nothing to be ashamed of there at all.
Cowboy if your not careful you are going to flood the market ;) lookin' good man . If you live in Laramie it was to cold to live on Tuesday ;D
-
GB
ya iwas was bout to cold to live here in laramie but i was nice and warm workin away on my leather work got a check book cover im doing now ill keep ya posted with pic
Cowboy316
-
Howdy Santee,
That's a pretty good job you did there of carving! Thanks for sharing it with us.
-
Like Ace, I tried my hand at the swivel knife. There's a few boo-boos and choppy areas on this (I tried to do some of it without my spectacles).
Beautiful work Santee
TW
-
Lookin' good Santee.
-
Thanks, fellas! However, this morning I was putting another coat of dye on, and I knocked the bottle over, spilling gobs of Fiebings Light Brown all over it.
So...now it will be much darker than I had planned!
-
Santee,
Pard I think you and I were born on the same night!! ::) ::) I feel for you :(, you work so hard and then in a blink of a eye something happens!
I hope it turns out better than you think!
ACE
-
I'll let you know. Kinda funny, really.
-
Howdy Santee
Don't feel bad, everyone I know has spilled a bottle of dye at least once on or off a project. (except me, knock on wood. but
my turns coming I'm sure.)
Years ago I made a holder for dye bottles from 2"thick foam, I cut the shape of the bottle out of the middle
of a 6" square. It holds the bottle with less chance of tipping.
WC
-
I've done that. ;D More receltly, though I've knocked my lexol over several times. Now it's been transferred to a bottle with a WIDE bottom. No more spills since then. ::)
You know, Santee, the darker color will look just as good as the lighter. Better, maybe. I never worry because darker is OK. It just adds more character. Be sure to post a finished pic.
-
Santee, Ya dun good. I know a fella that knocked over a quart bottle of black Omega dye years ago. It was all over the granite slab and everything around it. That fella has been real careful ever since then when there is a open bottle around. :-[
I like yer incised carving.
Horse Pen
-
Haha! You guys are very supportive, and I appreciate that. I've got a little Chevy Chase/Dick Van Dyke thing happenin'. Always have been a clutz.
You know, now that it's all dry, it actually looks...good! ::)
-
You know, now that it's all dry, it actually looks...good! ::)
That's good. :D
-
Santee, funny how some times mistakes we make lead to a different design than we have planned! I too. have made a holder
for my dye bottles after dumping them and creating a mess. Nice job keep up the good work
-
Santee,
The holster looks great but kind of afraid to post to this....not wanting to jinx myself.
But I guess it's kind of like riding motorcycles it's not if your going to it's when your going to crash.
Now for sure I will spill some dye.
Johnny Dingus
PS Glad it came out alright.
-
Foam holders...wider bottles...I'm getting the idea.
-
Beer huggies and widemouths, Santee. Still, looks pretty nice, and it'll look even nicer darker.
I've been neglecting posting some stuff here, so I thought I would update all ya'll on some progress.
Rough on the bench.
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_54963.jpg)
Turned out alright.
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_80946.jpg)
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_89377.jpg)
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_52511.jpg)
Jill Wilkins, Pony Express rider, needed some luck on her heels. Had custom Dove Wings made with Fraugahyde and a four-leaf clover concho from Buffalo Bros. Saddlery in Arizona. Also had some standard buckle-style straps made.
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_49844.jpg)
(http://forums.horsecity.com/uploads/1236879998/gallery_20846_510_48994.jpg)
Then a bunch of humming and hawwing.
(http://forums.horsecity.com/uploads/1232912345/gallery_20846_510_290227.jpg)
Just about got the angles right on these ... alas, no luck.
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_86930.jpg)
Tried my best not to screw up David Carrico's really nice dove wing design. Just about got there too.
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_6851.jpg)
More slobber straps. Drooling is quite uncouth, so ya may as well have some of these. LOL
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_510_17614.jpg)
Jessie Colvin's "Original Bling" straps. Big spots on dark boots! Scares the cows while she's cutting.
(http://forums.horsecity.com/uploads/1236879998/gallery_20846_510_31571.jpg)
My Carrico Big Round dove wings.
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_36137.jpg)
(http://forums.horsecity.com/uploads/1233991212/gallery_20846_737_13041.jpg)
Can anyone spot what I did wrong on those? Pretty obvious to me, but perhaps not to someone else (and no, it's not the lack of holes punched. They're actually on my boots now).
Hasta la pasta all!
-
Wow, very nice work, RT. You have been busy, for sure. They all look really good, particularly this pair, which is my favorite of the lot.
(http://forums.horsecity.com/uploads/1232912345/gallery_20846_510_290227.jpg)
-
wow RT very good lookin straps id love to have a pair wrapped around my boots knowing a friend has made them
great job bud keep up the good work
Cowboy316
-
Howdy RT
Those are all fine lookin straps.
WC
-
Howdy R.T.,
You state there was something wrong ??? I can't see anything but fine works of art, showing a lot of passion!!
I think they are AWESOME !!
Thanks so much for sharing, for every peice of leather work i see, is like a pic. in my mind!!
ACE
-
RT, Outstanding work. Can you tell me about the coloration of the first strap? That look is what I am trying to acheive on a belt.
Thank you sir, they all look great, JD
-
RT
let me guess you ran out of brass spots and had to use a nickel on LOL been there done that
Cowboy316
-
That's what I thought, too.
-
Well, it wasn't so much running out, as it was one day I must have been hammering something pretty hard (gotta hit the 3/4" punch hard, maybe that was it), and one of the spots jumped ship into the next bin. Snagged it up without paying a lick of attention.
I decided to leave it though. LOL. They're mine after all, and it's a walking lesson for me to pay closer attention to what I am doing.
Marshall. I was pretty partial to those myself. I almost didn't finish them. I got sidetracked on something one day and they were shuffled into my leather bin and stayed there. I got to wondering where they went, and looked everywhere. I was worried one of my dogs ate them.
Anyway, I found them, and finished them out. I thought instead of a concho to keep the leather from abrading on the stirrup, a nice, big fat spot in the middle would do the trick. And it did. Very low-key, but fun at the same time.
Parson, that's an interesting color discussion. I'm not sure you really want to know what I did to get that color, but here goes. Like anything else, I can never take the short way around the barn when I can take the long way and mid-way through it take a side-trip to the hayloft.
That color is a base of EVOO, set in until it was a golden tone, then Neatsfoot oil liberally to a rich red. Let it sit and tone out. It gets to be about this color here, but a bit darker to the brown side.
(http://forums.horsecity.com/uploads/1235907223/gallery_20846_608_4717.jpg)
Then, I stained it with Timber brown on one coat, let it sit and soak in, and then took my oil rag and rubbed it on the high spots. Some leather you can rub vigorously, and some you can't. The idea is that the oil rag will pull up the high spots, just like you would with an antique stain, but with much subtler effects. Next, because I liked the darker tint that the timber brown gave to it, I applied another coat. And another. Still wasn't getting brown enough (had to match the boots, but have highlights that stood out a bit). So I put on a coat of Dark Cocoa brown, and that REALLY sunk into the low spots and stayed in at the edges where you see it scalloped, in the X's on the billets and the Fraugahyde.
(http://forums.horsecity.com/uploads/1236961828/gallery_20846_608_33719.jpg)
That WIP has a little better overall idea. Don't go hog wild with it though, because you only want a slight, very slight tonal variation, because if you seal the leather with something like saddle-lac or Super Shene, or something shiny, it has a tendency to really pull the brighter tones out of the leather, sort of amplifying the color. And of course, any bends in the leather could also lighten the tone as well. So plan strategically, parson.
It took me about 3 hours of staining and drying and rubbing to blunder my way through to that at the end. But to wrap it all up, you have a base coat of coloring from the oil (which will change with age), toning of the highlights and midtones with Timber brown, and then deepening of the dark tones in crevices with Dark Cocoa.
Hope that helped.
-
Thanks RT, I appreciate the explaination, which I do understand. That alone is amazing :o
I remember you mentioning Timber Brown before, and I don't recall seeing that anywhere. I will do a Google search for it and see what comes up. I know I haven't seen it at Oregon Leather, which has a real good selection of dyes and stains.
You do mighty fine work, no doubt about it. Thanks for sharing, it's a great inspiration, JD
-
Both are EcoFlo ... I started using their stuff when I did the straps for Jessie Colvin, because Jessie is an environmentally conscious person, as well as being a heckuva good cutting horse rider. I liked their stuff, you can pick it up at Tandy.
Probably not the most amazing dye in the world, but it works pretty well, in my limited experience.
-
Howdy Rt,
Beautiful work!
You are an artist in leather! Don't remember if I mentioned it before but I sure like your logo.
Many thanks for sharing this with us.
-
WOW!
-
Thanks RT, I looked it up last night. With so many people recommending Fiebings, I've not examined much of the Tandy products. Obviously they work well for you, so I will check them out. Thanks, JD
-
Good lookin' work all around, RT. Good job & Well done.
-
RT
Love the spur straps.
One of the pards around here makes spur straps, but they don't compare to yours.
I really like the way your straps buckle on the outside. So many of the custom straps I've seen buckle on the inside so you can have more leather on the outside to show off your work. But yours show off the work and are correctly buckled on the outside also.
Great work.
Johnny Dingus
-
WOW!
I told you it was the long way around the barn! ;D
Thanks RT, I looked it up last night. With so many people recommending Fiebings, I've not examined much of the Tandy products. Obviously they work well for you, so I will check them out. Thanks, JD
Hope they help, JD. I'm sure there's some amazing stuff by lots of folks out there. EcoFlo just happens to be what I use. Good luck in finding what works for you, parson!
Good lookin' work all around, RT. Good job & Well done.
Thanks, Irish Dave! Now if I could just shoot as well as I work leather. But then again, if I could shoot as well as I work leather, I'd likely have blown a hole in my own foot by now. Best I just stick to the leather.
RT
Love the spur straps.
One of the pards around here makes spur straps, but they don't compare to yours.
I really like the way your straps buckle on the outside. So many of the custom straps I've seen buckle on the inside so you can have more leather on the outside to show off your work. But yours show off the work and are correctly buckled on the outside also.
Great work.
Johnny Dingus
Some folks buckle them out, some buckle them in. I'm not sure there's a right way or a wrong way. I just try to design mine so that when someone gets them, they're functional. Like with the conchos. They're there where they are for a reason. I figure pretty is nice, but functional is much better. But the best is pretty and functional all together.
Just like a good woman. LOL.
-
;D Nice work RT ::) 8)
TW ;D
-
Howdy Gents :D
I just finished a new holster, it's a Mexican one loop variation, with a wide skirt and adorned with brass and nickel spots of different sizes, the leather is a 7/8 ounce veg-tan leather, the color was done with strong cold cowboy dark roast coffee that was cook over two days, the finish was done the Chuck Burrows way, distressed and made to look old and used, I added some blood look a like stains by putting a few drops of vinegaroon on it, I'm making a money belt to go with it, and will post a picture of them together when finished.
Thanks for taking a look see ;D
tEN wOLVES ;) :D ;D
-
Howdy Ten Wolves,
Simply Beautiful! You have created a museum piece and a work of art Pard!
Many thanks for sharing this with us
-
That's a very good looking hunk of leather you've got there, TW. I like the finish and fit of it. Very much an antique-looking piece in every right. Bravo!
-
10 Wolves, that's a work of art. I really like the spots, it adds immensely to the look.
I need a lot more practice with spots before I put any on an actual project, because mine tend to go this way and that, and I don't always cover the holes in back. I understand bunkhouse, but I don't want my looking like "Drunk bunkhouse"
Besides the spots, the aged look is excellent. Thanks for sharing.
-
TW, :o :o :o :o
That Is AWESOME it is picture perfect "Packing Iron" to it's best! The color is supurb, the spots and the concho layout are perfect in everyway!! If Herman Heiser, would of designed that holster, that would of been about the only holster you would of seen people wearing, if they could afforded it!! :)
And I am so humble, that you and I have became friends, and that you have helped me as my mentor, but there is one thing a mentor cannot do, is put the artistic design factor into his aprintist, that has to be consumed my watching his mentor, and then taking what he has learned to another level!!
I am so great full, for you sharing this with everyone!
ACE
-
TW
flat out SNAZZY rig there bud i like the aged look tried to do that look with a ceel case but didnt have much luck LOL
ill get it figured out somedayand be like you pros
Cowboy316
-
Nice straps, RT. I like them both. Very nice with that frogahyde.
That's a fine holster, TW. You put a great finish on it. It looks like I'll have to try some of Chuck's techniques one of these days.
-
TenWolves, just terrific!
-
Real nice TENw,
Looks to be aged like ChuckB does. The bottom photo on my computer shows some brown in with the black. Would you tell us how you stained it?
Looks like it is an old original from the bygone days except not worn out.
Johnny Dingus
-
Howdy All
I'd like to thank you all for taking the time to look at my holster, and I appreciate your comments , thanks for the kind words
Johny Dingus, the black you think you're seeing is really dark brown, the color is just Dark Roast Coffee, that I simmered for a few hours after bringing to a boil, I did this for two days, until the coffee was really dark and black, you have to let the coffee cool over night, you can highlight the colors by the use of oil, I'm going to post a picture of the holster after it was in the dye for 24 hours, and then dried for another 24 hours, this is the color you get, and after you apply oil you get these beautiful dark browns, you just have to shade them in where you want, I added blood stains by adding a few drops of Vinegaroon.
Again thanks everyone for taking a look :D
tEN wOLVES ;) :D ;D
-
TW you did yourself proud pard. That holster is gorgeous. You have got that old leather look technique figured out, very nice leatherwork.
Wiley
-
10W, that is simply awesome looking! I like the antique look as you know, and that does look the part! Well done!
DM
-
Howdy Wily & Dalton
Thanks for you kind comments Pards, I guess I'm just lost in the old stuff Dalton, Wily doesn't know how we are when it comes to trying to go back to the past, When I can create a holster or belt the closer I get to making it look like it came from that time period the better it is for me, I can look at it and think wow this holster could have been there, and what story's could it tell, when I get this feeling about what I'm making , I feel I've gone as far as I can go. Thanks Gents for taking a look, it's appreciated. ;)
tEN wOLVES ;) :D ;D
-
Howdy TW
That's a good lookin holster.
I should have the leather for the belt in a couple of days.
WC
-
Ten Wolves, where did ya get that pattern? Ya got my interest itchin'!!! Is that a knock off of an old original Mexican made holster? Real nice craftsmanship.
Thanks for the pics,
Horse Pen
-
This is my second belt, and first basket stamp belt. I cut the blank from a side purchased from Tandy. The buckle is an old one, with sentimental value for my friend, Brian. He picked out the stamps, I would have used a little smaller border myself.
He wanted a burgandy hue under the black, so I dyed the whole thing with Fiebings Ox Blood, cut 3 to 1 with alcohol. I used Fiebing's USMC black on the back, and Tandy's Eco FLo Antique Gel black on the front. I doubt I'll buy that again. You have to use so much that IMO it's cost prohibitive. I wish I had used Mahogany instead of Ox Blood, there's always next time!
I need to apply a finish to it and punch the holes, then it's done. I would do a whole lot of things differently, and learned a lot from the project. I believe the second one will see improvement. I am writing down the things I think I did wrong, trying to create a paper trail for future projects.
Thanks for the opportunity to share! JD
-
JD
my friend your there with the basket stamp and the border looks fine to me
and bud throw up a pray for me i think my marriage is over and i need the strength to get threw it with out going back to the bottle thank you my friend
Cowboy316
-
Sorry to hear that one Cowboy, I sure hope you do everything possible to stop it from happening. I know there are times when things are out of our control, but working things out is usually a better option that flat out quiting. I will be praying for you.
-
JD
thaank you my friend ive been trying to do whats right cuz thats all know
Cowboy316
-
Howdy JD
Good job on the basket stamping. Border stamp is not too big.
WC
-
Well, here is project still in the works, another opportunity to do every thing possible wrong! This is a seat for a 3 legged stool. I made another one from thinner leather, covered with hair on cowhide, then screwed to the legs. My 260# butt took care of that pretty quick!
This time I'm using 9/10 veg tan, and pockets for the legs, which I am in the process of sewing on now. I grooved the stitch line, then used a #5 stitch groover, and then used a 4 prong chisel. Bad idea, I find out after the fact. Now I've learned you don't use a stitch groover when using a chisel. Lesson learned.
The circular stamping was done without a lot of planning, and it shows. It was more or less practice. I like the rope stamp, it's a Hidecrafter I bought from Oregon Leather. I decided to use it after I made the groove around the edge, another bad idea. It would have looked better with a thin line to follow.
The oak leaf carving is so so at best. Once again, they are there mostly for practice. I need to find a better way to do the leaf lines. I think it would help if I didn't cut them so deep. I thought I was going to like the background until I finished, then I didn't care for it too much.
I wish I hadn't punched the whole thing, but just the pockets. As it is, it's going to take forever to sew it, as slow as I am. Also, I need to figure out a way to better guage the amount of thread I'm going to need. I pulled about 12 feet, but I don't think that's going to be enough.
Any comments to help me do a better job are greatly appreciated. JD
-
JD
my friend looks good to me love the border what stamps are those looks really good
Cowboy316
-
JD, I like the belt good basket weave and border stamping. Don't be so hard on yourself the seat looks darn good my friend stay with it.
Wiley
-
Howdy Fellers,
Here is my first decent attempt at a holster. Please tell what needs to be done different, or what i need to work on. just shoot me straight.
]http://i689.photobucket.com/albums/vv252/jbroyall/100_0969.jpg[/IMG] (http://i689.photobucket.com/albums/vv252/jbroyall/100_0969.jpg[/IMG)http://i689.photobucket.com/albums/vv252/jbroyall/100_0970.jpg[/IMG]]]http://i689.photobucket.com/albums/vv252/jbroyall/100_0970.jpg[/IMG] (http://)
-
well heck i guess i didnt do the pictures right.
Sorry.
-
Howdy JD
I always put a stitch groove even when i'm using a chisel punch.
I just don't care for that look.
As far as how much thread, I start with 3 times the distance for 2 layers of 5/6oz leather.
WC
-
Here you go pard...let's see if this helps on the links to your pics... ;D
Howdy Fellers,
Here is my first decent attempt at a holster. Please tell what needs to be done different, or what i need to work on. just shoot me straight.
(http://i689.photobucket.com/albums/vv252/jbroyall/100_0969.jpg)
(http://i689.photobucket.com/albums/vv252/jbroyall/100_0970.jpg)
-
Jd, that belt is good. I agree with WC that the border is a fine width. Good job on the basket weave. The stool is good, too. I've been tempted to make one some day. When all my other projects are caught up, maybe. ;D On 9-10 oz leather I use 5 times the distance to be sewn. If I want a little left over on the needles for tying the next project, I add a little more.
Nice Dodge City holster, JC. I like the full tooling on it. Good work. Thanks for sharing. Thanks too, to Hank for getting those pics to show. When you post a picture, you can use the iconic link above your text box (bottom row, 2nd over from the left) to set up the commands and paste your url between them.
-
Very nice looking holster JC, very nice indeed. good color and carving.
Thanks for the comments gentlemen
WC, I don't think I communicated very well on that whole stitch thing. I used an adjustable groover to make the line, then an overstitch wheel to mark the placement of the holes. So far so good. Then I atempted to use a chisel to make the holes, and couldn't line them up properly with the pattern the overstitch wheel made.
It was suggested to me that if a person were going to use a chisel, they shouldn't use the overstitch wheel. Just start the chisel, then use the last hole to line up the next wack at it (so to speak) After the first time you would only be making three holes, not four. I know you know how it works, but I thought I out to lay it out for myself.
If you are saying you don't like the look the chisel makes, I agree with you 100%. I tried drilling, using my dremel, and that doesn't very good either, IMO. I didn't want to try sticking an awl through all those marks, since my awl work leaves much to be desired.
Now that I have an awl from Bob Douglas, things are looking up
Thanks to you and Marshall for ideas on the length of thread, I was definitely shorting myself there.
Will, the stool is a lifesaver for me, or a backsaver would be a better description. I had back surgery in 1989 as a result of an accident, and had two discs removed along with a double laminectomy. Standing for long periods can really be painful, so the stool really helps at shoots, and it fits in the gun cart real easy.
-
Howdy JD.
I agree with with Wiley. Don't be so hard on yourself. Your belt and stool look great! You should be proud of your work.
Howdy Justin,
I would be hard pressed to tell you what to do different. That is a beautiful looking holster especially for one of your first attempts. Just make more and show them to us.
-
Howdy JD, i think there are great !!
justin, If only miy first holster looked that good, I would be a happy camper!!
Thanks for Sharing !!
ACE
I just want to have fun :o
-
Here are a few pics of some of my latest pieces. One is a "John Wayne" rig with a straight and X draw. The cross draw pictured is for my 1860 army conversion. The grape cluster/vine rig was my first fancy rig to go with my alias. The Ammo box I just completed last month. It has room for (5) 50 count boxes of .45s and (4) 12 ga. shotgun boxes. I'll post some more later.
Corkscrew Tom
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1945.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1947.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1956.jpg)
-
Here's my Grape cluster/vine rig.
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1948.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1949.jpg)
-
This is my Ammo Box.
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1957.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1960.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1961.jpg)
-
Very impressive leatherwork there corkscrew, I really like the ammo box, looks like you've been at it awhile. Thanks for sharing
Wiley
-
WOW Pards ::) :o 8) ;D
I got busy in the shop, and look at all the nice work that has showed up, JD, nice belt, the basket weave came out nice , and your seat is going to be beautiful. :D
Justino, Nice job on your Dodge City, I like that extra drop you put in , your carving looks great, cool color too :D
Well it's GOOD to have Hank Rugerman back, and thanks to him for getting Justino's pictures posted. ;D
Cork Screw, Welcome to the forum Pard, you've made some really nice things, We'll look forward to seeing more of your work, looks like you have been doing this for a while, thanks for sharing with us. :o ::)
tEN wOLVES ;) :D ;D
-
Well, Corkscrew. You sure have some fine items to share with us. I like the carving on that crossdraw holster. Those leaves really give it a nice look. Your John Wayne rig is nice. I particularly like the clean look. The grape motif is refreshing on the other rig, too. The case is really nice and I like the texture you achieved with the background tool. Very well done. Glad you decided to join us here. You'll fit right in. Welcome.
-
Howdy JD
My post was confusing because half of it didn't show up.
I put a stitch groove on everything. I don't use an overstitch wheel, they don't match up to a punch.
Overlapping the last tine is the correct way to use it. I don't punch all the way through, just the top layer.
I use an awl the rest of the way so i can hit my stitch line on the back side.
On your oak leaf carving you did a good job but I don't care for the look of the backgrounder all the way around
the design.
Sorry for the missing parts.
WC
Thanks for the comments gentlemen
WC, I don't think I communicated very well on that whole stitch thing. I used an adjustable groover to make the line, then an overstitch wheel to mark the placement of the holes. So far so good. Then I atempted to use a chisel to make the holes, and couldn't line them up properly with the pattern the overstitch wheel made.
It was suggested to me that if a person were going to use a chisel, they shouldn't use the overstitch wheel. Just start the chisel, then use the last hole to line up the next wack at it (so to speak) After the first time you would only be making three holes, not four. I know you know how it works, but I thought I out to lay it out for myself.
If you are saying you don't like the look the chisel makes, I agree with you 100%. I tried drilling, using my dremel, and that doesn't very good either, IMO. I didn't want to try sticking an awl through all those marks, since my awl work leaves much to be desired.
Now that I have an awl from Bob Douglas, things are looking up
Thanks to you and Marshall for ideas on the length of thread, I was definitely shorting myself there.
-
Howdy Corkscrew,
It looks like you have been very busy turning out some beautiful work. We look forward to seeing more. Welcome to the forum and thanks for sharing your work with us.
-
Really unique holsters. Nice tooling.
-
Howdy Corkscrew, :o :o :o :o
AWESOME leather work :) Pard that is so very nice looking leath goods!! Great pic's to!!
I like your work, and i saw some stuff you did thatmight help me out, since I am just starting to carve!!
Thanks for sharing!!
ACE
I just want to have fun!
-
WC, Thanks very much for your advice. What would you suggest for a background for oak leaves? I'm sort of winging this thing, and I didn't like how it looked when I got done either.
I appreciate your time, JD
-
Howdy JD
Try a F900 checkered matter. That is what I use.
WC
-
Thanks WC, that's not one I have, but I will the next time I visit Tandy. It seems to be pretty good sized. It looks like it would be difficult to reach in the tighter spots. It looks like 898 & 899 are the same grid, but smaller tools. Doyou know if this is the case? Perhpas you don't get in around all the leaf edges. I'm going to check out your website to see if you have any oak leaf pictures.
Thanks! JD
-
Howdy Pal
Yes they are smaller. I have bevelers that match the checkering on my matters so I can blend into my matting.
I don't do many patterns that don't have borders so I don't have to worry about it that often.
WC
-
Thanks for the compliments guys!
I started doing leather work 3 years ago when I started shooting CAS. I needed some holsters and when I saw how much they were going for...
So I ordered a side of leather and some dye, I already had some tools that were my uncles' when he was in WWII, and away I went. I enjoy doing it and I make things for order and for friends. I'll post some pics soon.
Maybe some day I'll start a business or at least it'll be a great retirement gig, if there is any retirement!
I've enjoyed this post and have gotten some good ideas just from reading and learning from you all! For me the best way to learn is to watch and listen to those who have gone before.
Keep your tools sharp and your leather damp!
Type at you soon.
Corkscrew Tom
-
hey pards heres my latest cell phone case its a 1/4" border line then beveled and then i used my matting tool to lightly go over the whole thing then let it soak in a coffee dye i brewed up for 3 days pulled it out this morning and let it set in the morning sun till good and dry then rubbed a good amount of evoo into itand set back nout in the afternoon sun just brought it in and put a finish coat of tan coat on it and assembled it
enjoy pards
Cowboy316
-
Here are a couple more projects I've recently done.
Bible Cover and Stool cover
Corkscrew Tom
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1964.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1965.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1966.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1968.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/DSCF1969.jpg)
-
Howdy Corkscrew
Very nice work.
WC
-
Hey Corkscrew, very nice work. Nothing warms the heart of a pastor more than a good bible cover!
-
howdey Corkscrew, :)
You are sure doing some awesome work there! I realy like the bible cover!
thanks for sharing!
ACE
-
The hands are awesome.
-
Howdy Cowboy 316,
Great looking color you have there with your Coffee dye! I just brewed up some Natural Walnut Dye. Those Natural Home Brewed dyes really give one's work a unique appearance
Howdy Corkscrew,
Great looking work! I just knew that JD would like your Bible cover.
-
This is test, to see if I've figured out how to post pictures from Photobucket
I've finished stitching this seat, though this pictures doesn't show it. I wish I had learned more about stitching on a smaller project, because the punching and spacing is a disaster, and it took me hours to get the whole thing stitched. If there is a next time, I will only stitch the pole pockets on, and not the whole thing, which was only for looks :(
Cool, it worked. That's a miracle for a techno-challenged guy like myself ;D
(http://i165.photobucket.com/albums/u51/HarleyPastor/006.jpg)
-
JD
looks wonderfully comfy can my butt be the first to have a seat LOL
love the border ya got there what stamp did ya use or is trhat hand cut ??
but as for you using photobucket it work
Cowboy316
-
Hey Cowboy 316, it's from Hidecrafter, X 688. I found it at Oregon Leather. They carry Craftool and some from Hidecrafter. It was under 7 bucks.
Still praying for you bro.
-
JD
thank you greatly on day soon imm gonna take a road trip and come see some of you guys i think get out of wyoming for a bit
see some of the western part of this great united states got family in cali and washington
thanks again my friend
Cowboy316
-
Howdy JD
The seat came out great. The more you sew the faster it will go.
WC
-
You pards have been busy. I step out for the evening and find all this wonderful work when I check in today.
I see you're still making those cool cell cases, cowboy. Nice work.
Beautiful work on that stool seat and bible cover, Corskcrew. That seat really looks comfortable.
JD, that stool is really nice. That'll age nicely. Be sure to post a picture of it after a year of use. The stitching will get easier with practice. After about a mile of it, you'll think it's no big deal. ;D OK, long before that. ;)
-
Corkscrew real nice work there. Wow and for a new person to check in with a lot of talent. Welcome!
JD too nice a seat to sit on. Besides that I'd need one 5 legged.
Johnny Dingus
-
Cowboy 316, you've got those cell phone cases down pat looks real good I really like that color, I'm going to have to try that coffee dye technique on a rig. I guess if a fella got in a real bind he could just boil his belt or holster and have a cup! yeeeehaaaaa.
Corkscrew, man you've come out of the cute buckin pardner that is some awesome leatherwork. Those hands are great!!
JD, I like that stool seat that is some good leatherwork, nice job.
Every time I see the leatherwork on this site it inspires me to want to make something. Thanks for sharing
Wiley
-
JD
Nice tri corner seat. I made one myself and then tried to come up some way to make 3 folding legs. It didn't work too good. So now its just a fixed 3 legger. Thats when I did the store bought stool and made the cover I recently posted. But its neat to try different things.
Corkscrew Tom
-
I bought the plans for the stool from BigHouseDaddy.com, which included how to make the tri-bolt.
The first seat I made I screwed to the posts, but they pulled out pretty quick. Now I think I need to modify the poles, make them a little flatter where they go in the pockets, to hopefully make the seat sit a little flatter.
I've put a coat of Neatsfoot on the seat, not sure where I'm going to go with it next. I realize I need to do something with the bottom of the pockets. I didn't realize they were going show as much as they do.
(http://i165.photobucket.com/albums/u51/HarleyPastor/3%20legged%20Stool/3legstoolmod5.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/3%20legged%20Stool/3legstoolmod4.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/3%20legged%20Stool/3legstoolmod3.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/3%20legged%20Stool/3legstoolmod2.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/3%20legged%20Stool/3legstoolmod1.jpg)
-
Thanks for the pics of your chair, JD. Especially showing the tri-bolt. That wouldn't be too hard to make.
-
It was pretty easy for my shootin pard Mike. He made the bolts, I made the wooden legs. 3 bolts, 5/16 X 2 inches, set 120 degrees apart, brazed together. A little grinding, and a tri-bolt pops out.
-
Interesting. So, JD, it collapses for storage?
-
Howdy JD,
Your Chair is really slick! You are doing some very nice work. Many thanks for sharing this with us.
-
JD,
Yer really comin' along fast. Once you made yer mind up that ya could do this you really went at it. The chair and carving and border stampin' is lookin' great and yer photobucket is working too. Keep up the good work.
Dare ya, ;D
Horse pen
-
Thanks guys, you are very kind.
Santee, the seat slips right off, and it fits on-in the gun cart real easy. Our range is a rock quary, so it's like being on cement all day. It's reall nice to be able to sit for a spell after shooting. I had the last one out all the time, so whoever was keeping score could sit. It's pretty popular.
I've seen them made with thinner leather, so they would be more flexible, but with my carcass weight, I figured the heavier the better ;D JD
-
WOW JD, your cowboy stool came out great, great idea the try bolts, thanks for sharing all the stages of this project.
tEN wOLVES ;) :D ;D
-
Howdy ya'all ... I'm new around here, I've been building Gun gear, saddles & tack for over 20 years
I own Mountain Home Leather in Eagar Arizona ... It's great to see all this FINE leather work on display here!
Looking forward to seeing more.
A couple of my Items ;D
(http://www.mountainhomeleather.com/images/Prescott07-2.jpg)
(http://www.mountainhomeleather.com/images/newDuke1.jpg)
-
Wow, thats good looking stuff!
Welcome to CasCity, and I look forward to more of your posts!
DM
-
Very nice work, Stitch. I like the top one a lot. It has that Meanea look to it. Nice, balanced rig. Beautiful color. What did you put on it for a finish? The other would do John Wayne justice. They're both fine outfits. Welcome to the forum. Looking forward to seeing more of your work.
-
Howdy dalton and Marshal Will .... Thanks for the greet.
Both rigs are made from "Wickett & Craig" Oak tanned ( NOT Veg. tanned ) skirting leather,
The top one is a natural Darkened neatsfoot oil hand rubed with saddle soap and Murphy's oil soap.
The "Duke" style rig is the same leather oiled with Boiled clear neatsfoot oil
Thanks for your comments!
-
Thanks, Stitch. They look great.
-
Howdy Stitch, :)
I am glad you have come and joined Greatest Family on the Net! I have read about the Oak, and Hemlock, tanned leather.
If you don't mind and you have time, would you talk a little about the difference in the 2! If you don't have time, I understand!
Welcome and thanks for sharing!
ACE
-
:D ;D ;D Welcome Stitch ;D
It's good to have you jump in with us here at CAS CITY, your rigs are beautiful Pard, you can see your years of experience in the both of them, that Oak Tanned leather is beautiful, I like the tone and shade you got from oiling and using saddle soap, the leather looks real rich and buttery, We're going to look forward to seeing more from you, we have a great bunch of Pards here that share there talent on a daily basis, so jump in and have fun, Marshal Wingum runs a good forum here.
Regards
tEN wOLVES ;) :D ;D
-
Howdy Ace,
Thanks for the welcome …I always have time, if not …I make time.
“Oak” tanning is a term used to describe North American pit tanning processes,
The tanning solutions favored in the U.S. since the early 1800’s utilize the bark, nuts and cones
From Oak trees particularly California oak, Red oak and White oak.
These along with varying amounts of Chestnut and American Sumac produce leather that is both
Tough and supple at the same time, it takes on a color anywhere from gold, to russet to an almost Mahogany color depending on the tanning mix, It tools deeply and burnishes to a deep brown.
It has always been the preferred leather of those of us who make western saddles.
It also produces very high quality shearlings.
The “Oak” tanned leather coming out of South America is actually “Veg.” or Vegetable Tanned.
The acids used in south America come mainly from Quebracho Wood , Salt Cedar and various Vegetable matter, It yields a leather that is tougher, stiffer and has a very light color and when oiled in it’s natural state often gives a color much like mud.
That is why many custom saddle and gun leather makers like myself will only use U.S. “Bark” or “Oak” tanned leathers regardless of price.
Hemlock tanning is used mainly in the production of Sole leather and sheep skin as it produces a tight grained light colored leather.
Hemlock is used in some “Veg” tanning but there it also produces a lighter colored leather.
USA Oak tanned leather… Quality in … Quality out
Hope this was of help. ::)
-
Welcome Stitch
very impressive work ive benn doing leather for sometime now but just dont have anything to do other than cell cases and wallets but i would love to make sommething big here soon but in time it will happen LOL
Cowboy316
-
Beautiful work, Stitch, and a terrific patina on both holsters.
Great website, too.
You mention hand rubbing with neatsfoot oil and soaps. Do you let the neatsfoot oil get bone dry and then apply the soaps? I'm pretty much of a newbie at holster-making and would appreciate info on the sequence you use to get that great effect.
-
A little late in the welcome, but, WELCOME! Great stuff, Stitch.
-
Howdy Stitch, here's another Welcome from a member of the CAS City Leather Shop. I can tell you for certain this is a great group of pards. I've been here about 6 months, a green rookie, and they have treated me very well.
Thanks for the information you've given on leather. That was info I'd not heard before. Chuck Burrows of Wild Rose Trading, a Forum member and fantastic leather worker and knife maker often sings the praises of Wickett & Craig.
I can see why you have the handle "Stitch" from your work, very classy indeed. Thanks for sharing, I look forward to seeing more of your work, and benefitting from your advice and experience. JD
-
Well thanks everyone for the greetings!
I’ve looked around a little and there sure is a lot of talent around here, ya’all do great work!
It’s great to see so many in the trade here willing share their knowledge.
Our trade is as old as man, and it’s our duty to pass on our knowledge to one another to keep it alive and thriving…Kind of a way of “Paying it Forward”.
Everyone in this trade eventually develops their own “Style” that becomes unique and recognizable
Often when I see leather work I know who the maker is without even seeing a stamp.
The process I use for finishing my leather works was taught to me 25 years ago by the man who first taught me the art of saddle making. … It’s pretty involved, And many I’m sure will shake their head and think “Your kidding right?” But it has served me well for many years.
I won’t go into a long winded explanation of it here so as not to bore the pants off everyone, But anyone out there who’s interested feel free to contact me and I’ll give you the hole schpeel.
Seeing other Makers work and learning and sharing tricks of the trade has been a life long passion of mine
And I look forward to doing a lot of that around here!
-
Howdy too Stitch...beautiful work.. ;)
thanks for sharing... :)
-
Welcome Stitch, ya have any pictures of yer saddles ta share with us?
Good day to ya,
Horse Pen
-
Howdy Stitch
Welcome and hope to see more of your work.
WC
-
Stitch,
Welcome, nice work. Looked up your site. Nice products good prices.
Thanks for joining us hope you will share some of your secrets with us also.
Johnny Dingus
-
Here is a rig I just finished for myself. Always wanted to make one with a lot of spots. I'm in the process of making a Cartridge Pouch to match it.
This rig will be used as a spare. I just can't resist making another rig for myself using the Natural Walnut Dye I just brewed up.
Sorry for the lousy picture.
-
Johnny,
Nice Rig!
Looks real nice and even coloring. I am getting to like spots more and more.
Give the run down on how long it was in the dye please.
Now if I just had long guns I could make one with lots of spots too. :)
Johnny Dingus
-
Howdy Johnny D,
Thank you for the kind words. This rig was dyed with Fiebing's Professional Oil Dye. I wiped on a coat, let it dry for a few minutes and then followed up right away with a second coat. After letting the dye dry real good, I put two coats of Neet's Foot Oil on and then finished with Skidmore's.
As i mentioned, I'm going to make another rig using some Natural Walnut Dye that I recently brewed up. Attached is a picture of a rough sample Holster that was soaking in the Walnut Dye for five days. The final finish is Skidmore's again. Ten Wolves was a great help with helping me learn the brewing process.
-
Howdy Johnny ::) :o 8) ;D
Your new rig is down right evil looking, and I mean that in a good way, I'm a sucker for spots anyway, and the color and design looks great, now if this is a spare, I can't wait to see the main rig your going to be making. WELL DONE PARD :D ;D
tEN wOLVES ;) :D ;D
And I see you over there Jonhy Dingus ;D How ya doing Pard :)
-
Hey Johnny, nice work. I'd like to make something with spots before too long. I really like the color of that Walnut dye. I've got to take a wack at that too.
Mr Dingus, is that HAIR down on your shoulders!?!?! Mine was that long in the mid to late 70's, now I'm lucky to have any at all!
Bless you bro, I like it! JD
-
Nice rig, Johnny. I like it. Nice contrast with those spots on the dark leather. It's a good look. What kind of walnut hulls did you use to make the dye for the next rig? I have some English walnut dye, but it isn't very dark. I think I'll need to brew up some with the black walnut hulls I have for the next project.
-
Many thanks for the kind words Pards!
Marshall, I used Black Walnut Hulls and they were green when I started brewing them.
-
Thanks, Johnny.
-
That rig is a real beaut, Johnny. Sure do like those spots!
-
Johhny MAC, AWESOME DUDE!! :o :o
I realy like it, very clean looking and I love those spots!!
Keep it Rocky Johnny! Next Bike trip, you and misses are going to have to swing south! i have the camper stocked and ready to go!
Later ACE
-
Mr Dingus, is that HAIR down on your shoulders!?!?! Mine was that long in the mid to late 70's, now I'm lucky to have any at all!
Bless you bro, I like it! JD
Yes JD. Most people take me for a liberal hippie now. Specially where I live. But I am a former Marine and am definetly not liberal. I grew it out to be more authentic to the way cowboys looked. At least in my mind. ;)
Johnny Dingus
Here I am at 3yrs.
(http://i26.photobucket.com/albums/c105/BlueViffer/Cowboy2.jpg)
-
;D :D ;) ::) John, you look the part Pard....... 8)
Tw ;) :D ;D
-
Oh I dunno, :-\ I think he looked more like a cowboy with the marine cut at 3 years old!!!
LOL!!! ;D
Cheers,
Horse Pen
-
Oh I dunno, :-\ I think he looked more like a cowboy with the marine cut at 3 years old!!!
LOL!!! ;D
Cheers,
Horse Pen
Speaking of pictures, that's a dang nice picture of you HorsePen, in your new Avatar, looks like you just stepped back 120 years or so.. IMHO... :D ;D
TW ;)
-
Howdy Johnny
That is a good lookin rig. Keep up the good work.
WC
-
Thanks Ten Wolves,
I'll tell my daughter you liked the picture. She has a new camera that has a setting on it for sepia tone pictures. She shot this one of me as I was getting ready to go to the convention the other day.
BTW boys, the NCOWS Convention was real good. Ya really need to try to make it next year.
Hats off to Grizzle Bear, Doc, Books, Trap and all the others to numerable ta mention for a great time in KC.
Adios,
Horse Pen
-
Great picture Johnny. I have a few around like that I need to scan into the computer. I see a lot of bikers around the NW with long hair, and none of them are liberals. They are patriotic bunch for sure, and thank God for it.
Thanks for serving your country in the Marines. I appreciate it
God bless, JD
-
Cool pic, Johnny. You really looked good there.
Nice avatar, X-Pen.
-
Good Night Nurse! Let me catch up here. A fella goes away for a few days to shoot Trailhead in Columbus,Texas and everyone is showing all this fine leather work!! First off, WOW, how lucky can we get? Welcome Stitch mighty fine professional leather work there pard, thank you for sharing with us and thanks for that info on the leather tanning processes. We look forward to more of your work and knowledge. There are about a half dozen or so of ya'll such as Will and others who are real pros of leathercrafting on this forum. It sure makes it fun for folks like me who have a lot to learn about this craft.
Johnny McCrae That is a mighty fine looking rig, those spots really make it look "muy malo hombre" ! if you know what I mean.
Johnny Dingus, Semper Fi Marine, once a Marine always a Marine, short hair, long hair, no hair...the change is forever.
Wiley
-
url]<a href="http://s689.photobucket.com/albums/vv252/jbroyall/?action=view¤t=100_1030.jpg" target="_blank"><img src="http://i689.photobucket.com/albums/vv252/jbroyall/100_1030.jpg" border="0" alt="Photobucket"></a>[/url]
attempt #2
Will Ghormley's Slim Jim
-
Justino,
Nice work. Liked you knife holsters too. That wouldn't be a switchblade would it?
Good work keep it up.
Johnny Dingus
-
Howdy Justino,
Beautiful job on your Slim Jim Holster especially for a second attempt. We look forward to seeing your future projects. Many thanks for sharing this with us.
-
yes sir it sure is a switchblade.
my great aunt passed away about a year and a half ago at 99.
her father, my great grandfather carried a switch blade, brass knucks and a colt saa 38-40 every day of his life.
she passed them on to me. I carry a similar switch blade (the original is too valuable) every day. the knucks i keep at home with my colt, but maybe if i ever get elected sheriff i will carry my colt.
-
Well, I'm stragglin' in a day late and a dollar short......
But I want to welcome Stitch to the board and offer my compliments to him and all the pards who have submitted their projects since I was on here last.
The NCOWS Convention was indeed a great event. Got to meet Horse Pen and several other CasCity pards. I think all had an outstanding time of it and I want to invite all of you to attend next year --Kansas City '10.
-
Way to go JC,
Looking good Pard. Keep that good leather work coming!
I never get tried of looking, thanks for sharing!
ACE
-
Howdy JC
Good lookin work. Keep it up.
WC
-
You did a good job on that one, JC. Good color and the tooling works nicely. Fine work. Keep those pics coming.
-
Howdy Justino
Pard your holster came out great, nice color and the carving/tooling looks good, it has a nice aged look to it, thanks for sharing Pard, you did good... ;D
tEN wOLVES ;) :D ;D
-
Howdy Gents ;D
I finished my money belt to go with my Mexican one loop, I like the color I got from this dark roast coffee, who a thunk it.
Here it is hope you pards like it
tEN wOLVES ;) ;D
-
Hers some more
-
Justino: I like the color of that holster. Nice lookin' work.
TW: That rig made me shiver when it popped up. Gorgeous.
Good work, gentlemen.
Horse Pen
-
Big Guy,
If you read my email, you know how I feel about it. AWESOME!!
No doubt about it being period correct , my friend!!
ACE
-
Howdy Ten Wolves,
Simply outstanding! This rig is a work of art and it is what you see in museums. Great design and excellent workmanship. You can be very proud of this rig Pard. Many thanks for sharing this with us.
-
That's a fine belt, TW. Striking with the spots and conchos. Nice work. thanks for the pics.
-
Really nice work tENw,
Like the holsters too. Does look like they belong in the "Packing Iron" book.
You do fantastic work.
Johnny Dingus
-
Well I started with this
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma001.jpg)
And here is one finished.
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma005-1.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma008.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma007.jpg)
Now to do the other and a belt for them.
Johnny Dingus
-
Howdy All
Thanks Pards for the kind words, I'm glad you like it, Thanks HP, I didn't mean for it to pop out on you like that, and Ace I always appreciate your comments and words of encouragement, Johnny McCrae you too Pard, its great to have pards like you all, thanks Marshall Will and Johnny Dingus for your kind words, what a support group.. ;D :D ;D
Johnny Dingus, your two holster look great, did you design them yourself, or use a pattern, good style, and your tooling is looking good too, nice color on the finished holsters, you'll look good wearing these, you have them cut down low enough that those guns of yours will just walk out when ready, well done pard. ::) :o 8)
tEN wOLVES ;) :D ;D
-
tENw,
So far it is just the left one finished. This is my first 310-yuma holster with a little drop. No patern just from pictures. Will doesn't sell a pattern for these yet. Don't know if he will.
It doesn't do justice to his but maybe my next pair that will be no drop will be better. I always think if I could do a couple of the same style in a row I could improve a lot.
Johnny Dingus
-
tENwOLVES,
A question for you, your left handed do you make your belts buckle opposite because your left handed?
Johnny Dingus
-
Nice, Johnny. The dark color looks rich. Your tooling came out well and gives it the right look. Good work. Looking forward to the finished rig.
-
Howdy Johnny D.
Pard I think you are coming along real well, I remember when I gave carving my a first try, on a Cheyenne holster, I took it in to show WC, and to my surprise he like it, but he did point out things I could do different on my next one, when I was using the bevelor, I wasn't hitting it hard enough to get a deep enough impression and he pointed out just where it needed to be deeper, so the next time it was better, it's a learning craft, I've been at it for three years now, and I'm learning new things every day, being retired now I guess I have a big advantage over some of you that go to work every day, when the weather is warm enough, I just about live in my shop.
Johnny for designing your own holster after 310 to Yuma, I think you have done one heck of a job, you can be proud of yourself for sure, it will only get better from here on. ;D Johnny I just a glimpse of you last reply, the answer is yes I'm left handed I put the buckle on the right side for two reasons, first I like to keep bullets as close to the right side as possible, for easy access of loading, when I load, my gun never leaves my left hand, my right hand does the hand work for loading, and having my bullets on my right side puts the bullets where needed, the other reason, is if I were to LOOSE SOME STINKING WEIGHT, it is easier to make the adjustment on the tongue side of the belt, IMHO, Anyway it works for me.. ??? ::) :o ;D
tEN wOLVES :D ;D
-
Awesome TW and Johnny! Really nice stuff.
-
Howdy Johnny D,
Beautiful work on your Holster set! It sure looks like this set could also be found on the pages of "Packing Iron". Great finish!
Many thanks for sharing this with us.
-
;D ;D Thanks Santee, much appreciated Pard. :D
tEN wOLVES ;) :D ;D
-
TW,
Very well done. Looks like your back in the groove my friend. I especially like the belt buckle...where did you get that one?
-
Johnny, Nice holsters! I like that pattern. Looks old west, but still looks fast! Nice job.
10W, wow. That looks great! My next project is going to be a money belt (hopefully). Yours looks great!
Holster is awesome too.
DM
-
TW...You better watch out...pretty soon you'll be too good to speak to us poor folks.... ;D ;D
Naw not you...your a great sort and boy do you have the "touch" looking good my friend.. :D
and Johnny...Your miles ahead of me..when it comes to tooling...I haven't put anytime into carving and tooling like that...good job... ;)
-
Man Alive, and fella's got to stay on top of things around here, with so many excellent projects being built & displayed for us to drool on!
10 Wolves, what a fine piece of work. Everything about that holster belt combo is outstanding. I agree with the coffee color comment. what an excellent look. I am going to have to give that one a try. It's easier to come by coffee than walnut hulls!
Johnny D, I've been watching for your 3:10 Yuma holsters, and you've done a great job. I was anticipating more of a drop than I see in the pictures. Everything about them is great, the tooling and coloring look sharp. I don't know what Will does to build age into his finishes, but I sure like the look of yours. I can't want to see the belt!
God bless, JD
-
Golly Dang Amighty!
I try to do something nice enough to show here and TenWolves and Johnny blow me out of the water.
EXCELLENT JOB GUYS!
-
Okay, now wait a dern minute here. I just read how Johnny got that dark brown. Now, I went and did the coffee thing and it didn't come out near that dark!
What the..?? C'mon, Johnny, spill the beans (no pun intended). How long did you let it sit in the java?
-
Ten Wolves,
(tapping on yer brim) Where did ya get the buckle? I don't believe I have ever seen one like it?
Horse Pen
-
Just caught up on the postings.....again.
Very nice 10W. Really like the color and stamping arrengement. I think you outdid yourself on this one, pardner.
-
I have the same curiosity as Santee regarding the coffee. You all probably know the test for cowboy coffee: it needs to be able to support a horseshoe or it's not strong enough!
So, what kind of coffee, how long did you boil it, and how long did you soak the leather?
Thank you kindly!
-
Howdy All
Boy this makes a pard feel good that you all like my new rig, Outrider and HorsePen, as you probably already know I tend to save things, I've had this Solid Brass buckle for over 50 years, I traded a neighbor kid a large bag of marbles for it back in 1954, I was really into the cowboy thing as a kid, guess I still am, this buckle has been on countless belts where there was a snap so I could change the buckle when I wanted, that's all I know about it, he said his Grandmother gave it to him and that it belonged to his Grandpa.
Santee, & JD, the coffee I used to dye these pieces, was made with the cheapest DARK ROAST COFFEE I could find, I put the whole 1# can in a 20 qt. pot with lid, and plenty of water I usually make 10/12 QT.which filling the pot up just past half,along with some IRON shaving, maybe a 1/4 cup, I brought it to a boil and then let it simmer for 3 hours, then let it cool over night, and then did the same thing over again, after letting the coffee cool over night,I pour everything including the coffee grinds, into plastic container big enough to put my work piece in, I put my finished holster in the dye, and let it stay in there for 24 hours, then when dry, the first thing I used was Lexoil, after it dried , Neatsfoot oil, a couple coat, then BAG KOTE, and Gum thraecanth, both mixed at 40%/60% water, with a final finish of Skidmores. tHE BELT was dyed before making. alcohol was added to the dye when done to preserve it, a 1/2 cup to a quart will do it, and store with tight lid in a heavy plastic container, I use the large cat litter jugs with the wide opening lid.
Dalton you'll love a money belt, it's the most comfortable bet there is, Thanks
Thanks Hank, for your kind words, and that won't happen Hank, you Pards are my folks, Justino and Irish Dave thanks pards for
your comments and kind words. ;D
Thanks All your comments are really appreciated :D ;D
tEN wOLVES ;) :D ;D
JD here is a picture of the holster and the color it is after dying and dried , the color is impregnated in the leather, and will jump out when oiled, you can see the difference in these two pictures, when oiled the color will return to the black coffee it was soaking in, which is a rich dark brown.
-
Howdy TW
Great work. You make me proud every time you make something.
WC
-
Howdy Johnny
Good lookin holsters.
WC
-
Howdy TW
Great work. You make me proud every time you make something.
WC
Thanks WC, if it wasn't for you, I wouldn't be doing any of this you've been a great teacher and mentor, and I continue to learn from you all the time.
tEN wOLVES ;) :D ;D
-
I really like that finish, TW. My coffee attempt was a bust. I'll get the cheap stuff next time. Good tip.
-
Yeah...think I'll try that route, also.
-
Howdy Will & Santee
if your going to do this make sure you get the DARK ROAST OR EXTRA DARK ROAST,I used the Ralphs/Krowgers brand the cheapest they had and the strongest, then don't get in a hurry, this whole process takes time , but I think it's worth it for the results you will get, just cook the heck out of it, it should look like old motor oil when finished, spend a couple days doing this , and DON'T FORGET TO PUT THE IRON IN,you need it for a mordant, then leave your piece in for 24 hour or longer, your on your own here, when you start the oiling , you can vary the shade by how much oil you apply.
Good luck, and have fun with this ;D ::) 8)
tEN wOLVES ;) :D ;D
-
OK, TW. I don't have any iron in it. That would explain why it wasn't taking. I'll boil the stuff again with some iron in it. Thanks for the tip. I knew you needed that in dying cloth but was unaware it was necessary with leather. I'll re-do it. Thanks.
I tried some since it wasn't coloring the way I wanted. Sheesh. It was strong enough to make a dog bite his grandmother. :P
-
OK, TW. I don't have any iron in it. That would explain why it wasn't taking. I'll boil the stuff again with some iron in it. Thanks for the tip. I knew you needed that in dying cloth but was unaware it was necessary with leather. I'll re-do it. Thanks.
I tried some since it wasn't coloring the way I wanted. Sheesh. It was strong enough to make a dog bite his grandmother. :P
Yea it gets strong OK, I use IRON, in all my natural dyes, it works great as a mordant, and will give you color that you can't get without it, you can use a hand full of iron nails, just make sure you clean any oil or grease off before you put them in, if you have some rusty ones all the better, and you can just leave them in your dye. if your dye has been sitting around for a long time, you can redo it, by putting it back in the pot and cooking it all over again, the alcohol will burn off real quick, and you will have to add more when it's ready to be put away again, this way you can really get some mileage out off your nuts and coffee so to speak. LOL just make sure you always use the Iron, it's really the KEY ingredient, you won't get much color without it.
tEN wOLVES ;) :D ;D
-
Any suggestions as to a source of iron? Steel Wool good enough? I have a small steel shop that sells metal of all kinds, so I suppose they would have iron. does it need to be shavings, or just a chunk of iron? How about cooking in an iron pot?
This is all new to me, but the results are worth the effort.
Thanks Gents, JD
-
I tried some since it wasn't coloring the way I wanted. Sheesh. It was strong enough to make a dog bite his grandmother. :P
;D HA! :D
-
JD,
I used twenty nails to about 2-1/2 gallons of mix when making my Natural Walnut dye. I bought them from our local Hardware store. Don't know the "penny" size but they were around 3-1/2" long and 3/16" in diameter.
-
hey guys quick question since we are back on the coffee dye whole bean or ground???????
Cowboy316 ???
-
Cowboy 316, I believe 10 Wolves talked about using the grounds, so I doubt it's whole bean. Also, he's using the cheapest store brand (I know Ralph's) and I don't think they have whole bean.
Johnny, I don't think nails are made out of iron, as distinguished from steel. But, I'm no metallurgist, and if that works for you, great. I can sure give that one a try. Thanks!
-
Howdy Gents
MAKING COFFEE & NUT DYES = HOW TOO's
Just so this doesn't get more complicated than it is.
#1 , DARK ROAST COFFEE 1# CAN OR MORE, it's up to you, I make about 10 to 12 QT. with this, and I use a 20 qt. pot with lid, if you have a 20 qt. iron pot with lid , use it if you can lift it...
#2, use some IRON, SHAVINGS, IRON NAILS NOT PLATED OR GALVANIZED, JUST SIMPLE IRON NAILS, a lot of your finish nails are iron, if it will rust, or will stick to a magnet it has IRON IN IT, but you want to clean off any oil or grease it may have on it before you put it in your pot, steel wool is OK but you have to burn the oil out of it, which is a pain, LOTS OF SMOKE. WITHOUT IRON AS A MORDANT, YOU CAN'T ACHIEVE MUCH COLOR, IF AT ALL......
#3 with 10 to 12 QT. of water in your pot, bring it to a boil, then turn the flame down to a slow simmer, and let cook with the LID ON, for about three hours or so, let cool over night, and then do the same thing again the next day, if you want to cook it three or four days go ahead and do so, just make sure you keep your water up and don't let it boil dry, and leave the lid on through the whole process.
#4 AFTER THE COFFEE DYE HAS COOLED, you can pour the whole works, COFFEE/COFFEE GRINDS/IRON/DYE, in a thick plastic container, for what ever size you need for what you're going to dye, ( small and deep for holsters ) ( large and flat for belts )
#5 PUT YOUR LEATHER in the container, and leave it SUBMERGED for 24 hours or more if you want.
#6 REMOVE YOUR LEATHER from the container, if it is a holster , you want to do your wet molding now, and let dry for 24 HOURS. if it is a belt, lay it out straight, so it will dry the way you want it.
#7 APPLY LEXOIL CONDITIONER, both sides of leather and let dry for a couple hours.
#8 APPLY NEATSFOOT OIL, a couple coats should do, but you can vary the color with the amount of oil you put on, LET DRY OVER NIGHT.
#9 THE FINISH is up to you, you can leave it the way it is now, or you can do like I did by using Gum Thraecanth at 40/60% water, and Bag Kote at 40/60% water, I use a spray bottle to apply this, just apply as you want and rub in, and when it looks the way you want , STOP... YOU can also finish your burnishing at this time.
#10 IF YOU WANT AN ANTIQUE LOOKING holster or belt, you will want to bend and twist your leather, to put some wrinkles in the leather, and give the leather that used look.
#11 AS A FINAL STEP, I apply a coat of Skidmores Leather Cream,
#12 NOW YOU WANT TO STORE YOUR DYE, I put the works in a empty cleaned CAT LITTER container, and I add a 1/2 cup of Rubbing alcohol to every QT. of dye, put the lid on tight and store.
#13 WHEN YOU WANT TO USE IT AGAIN, it will help to pour it all back in the pot and cook it again, the alcohol will burn off real quick, and you will have to add more at the end of your dying work, but this helps activate everything, you could even add more coffee at this time,
#14 JUST A NOTE, your dye should look like OLD MOTOR OIL, a dirty black, the Mexican one loop holster I did was dyed for 24 hours, and you can see the color of the coffee that came out when the leather was oiled, so have fun with this, you can create just about any shade or color you want by testing on scrap leather.
#15 When doing the NUT DYES, you want to remove nuts after cooking and before submerging your leather in the dye, you can hang the nuts up in a stocking and let air dry, or you can freeze them and use them again, also when cooking the nuts, I like to cook them for three days with the cooling in between, and when dyeing I leave my leather work submerged for five days, this longer time allows the color pigment to really get into the leather. Follow up the same as the Coffee dye.
I hope this will make it easier to follow how to make these dyes ;) ;D
tEN wOLVES ;) :D ;D
-
TW
thanks bud im gonna give it a try today just got some maxwell house dark roast from walmart couldnt tell which of the walmart brand coffee was the dark roast so i went with one that said dark roast LOL
thanks again bud
Cowboy316
-
And That's why everyone on here knows what kind of Pard you are....You're a prince..and we appreciate you sharing that "How To"
It just don't get no better, being in a group like this one... :)
-
;D ;D ;D ;D ;D Thanks Hank ;) :D
TW ;) ;D
-
Wow, a guy is gone for a few days and it could take a week just to catchup. The amount and quality of work you pards are doing is tremendous
Like Hank said it don't get no better than this !!!!
-
Thanks very much for that info 10 Wolves, it's greatly appreciated. I'm coping it and storing it on my computer.
Bless you, JD
-
Rolling Thunder, after comparing my work with yours I see I still have some work to do, but I'm tickled how this one came out. I was gonna send it off down the road but I think I'll keep it for my own self.
Thanks for the tutorial. 8)
[Lost link deleted by moderator]
-
Rayban, you have nothing to be ashamed of that is a beautiful little knife case in anyones opinion. You are the master of the frog hide ;)
-
That's a mighty fine looking case, Rayban. It has a clean look and the stitching keeps it interesting. That folder will do well in there.
-
Very attractive case!!!
DM
-
Howdy Rayban
Good lookin sheath. Be proud.
WC
-
Howdy Rayban
Nice looking Sheath Pard, I really like the the bumps you put on your work, it gives the finish a reptile look to it, nice knife too, looks like a case, I have the same knife but with a pale yellow scale, good sharp knives. Thanks for sharing this with us, I always look forward to your post. :D
tEN wOLVES ;) :D ;D
-
those bumps look great! I really like that concept, and it totally looks natural too. Looks great with the stag hilt too.
-
Rayban,
Great looking sheath, as everyone here can see you having nothing to doubt in your work.
Do you call that look frogskin?
Now all of you are posting pictures like you are professional photographers.
Me I'd have to try and get my cat to lie real quiet and not move to get a picture on fur. Don't think it would work.
Post more of your work for us to see Rayban.
Thanks
Johnny Dingus
-
Rayban
sweet case ya got there bud looks like ya got it off a big old frog bet hes cold now LOL im gonna try that on one of my cell cases here as soon as i get some more leather but anyway good job RB keep it up
Cowboy316
-
Rayban, DUDE! That looks great. I hope you can explain how you did that frogskin, or have the person that taught you share his techniques with us. A most excellent job!
Thanks for sharing your work, JD
-
Thanks for all ya'llz kind words Gents ;D
You may remember Rolling Thunder posting some pix of the spur straps he did using this "frog skin" texture. I begged him to let me in on his technique, so he sent this link..
http://www.johan-potgieter.com/leatherlearn/?p=14
I ran out to my nearest Tandy store and picked up the three seeder tools I needed' 931,864, and 631 and sat down to give it a try.
It's tedious for sure, but the outcome is kinda cool.
-
Howdy Rayban
Good link Pard, thanks for the information
tEN wOLVES ;) :D ;D
-
This is kind'a an off-the-wall post of work I'm doin'. I went on an 1820 Survival Weekend back in February. I told Dalton Masters I'd post some photos of the weekend. Some of the highlights: In a snow storm I walked in a huge horseshoe and ended up a mile south when I was supposed to be a couple miles north. I singed my beard so bad blowin' on my tinder that I had to shave it off when I got home. After melting snow to replenish my canteen, I didn't get the cork on tight and dumped it into my blanket before I crawled in. But, all-in-all, it was an enjoyable and educational weekend.
The following link has some photos of the gear I've made for re-enacting an 1820s Plains/Mountain Man persona. There ya' go Dalton.
http://www.willghormley-maker.com/1820sTrekkin.html
Will
-
Looks ta me ya got the hair a the bear in ya fer shur, Will. Thanks fer sharin' the experience with us.
Ya lurn sumthin' ever day if ya live long enuff!!! ;)
Cheers,
Horse Pen
-
Howdy Will
Thank you for sharing that trip.
Not something I think I could do.
WC
-
Howdy Will
Great story and pictures Pard, I'm glad you're still with us, that must of been quit a trip. :o ???
tEN wOLVES :D ;D
-
Howdy Mr. Will,
Thats sounds like something i might of done when I was young! ;D And I did do stuff similar to that! You made some real awesome gear for your 1820's treak!
We are all great full that you sharded that with us!
ACE
-
Hey, Will. It sounds like you had a good time. That was a fun read. Thanks for sharing your experience with us. I don't know if I'd start fires with my beard, though. That takes a real man. :o
-
Hey Marshal,
It was a good time, and it gives me a lot more respect for what our forefathers went through so we can squander...I mean, enjoy the freedoms we have, ('er, used to have I guess). As for startin' fires with my beard, it took me a second to decide to slap out the fire rather than stack twigs on it. It was pretty cold.
Will
-
Glad to see you made it back in mostly 1 piece, Will! I was telling some folks here what you were planning on, and they thought you were nuts. I didnt. Sounded fun to me, but then I am a furry faced man in the winter. Someday, maybe I will give it a try too.
You didnt have to eat 'yote did ya?
DM
-
Hey Dalton,
No, all the 'yotees had better sence than to be runnin' around in that weather. They was all curled up under a log some where lickin' their parts. I had to settle for parched corn an' oatmeal, which isn't bad eatin' actually. If it had been turkey season I could'a taken a couple of hens out of the jack pines and cedars. There was a small herd of deer that were out of season too. They seemed a bit perplexed that I was chasin' 'em around in circles.
If you take a notion you want to try some thin' fool-hardy like that, send me a wire. I'd like to work in some river float trips this year as well as a couple weeks prospectin'. Another camp or two before it gets too hot would be nice as well.
Will
-
Not in my BEST day! but I'm glad you enjoyed yourself!Thanks for the pictures. You're a great story teller WIll, JD
-
Will that there sounded like shinin' times to this ol hivernant. Still got all my mountain plunder cached away sommers aroun the place . It would plumb tickle me to hit the trail with ya one of these days. If the whole shebang don't go up in smoke I might jus try and talk you into it come nex yeer.
Gun Butcher aka Three Poles aka Two Step
-
Hey Gun Butcher aka Three Poles aka Two Step,
I'm game. We'll have to whittle down your handle though so we can carry on a conversation, otherwise it'll be a long trip.
Will
-
Anyway,....here is a new experiment (to me) that I have been woking on. The old timey way of incised carving on the holsters has intrigued me but I have never tried it until now. Here is my first attempt at it. This is a slim jim pattern for a Remington revolver. The design I developed from a couple of old slim jim holsters in Packin' Iron. I took elements of design from the holsters I liked. Not an exact copy of any one perticular holster. I used the "free hand" stitching groover from the leather factory and a swivel knife. I learned a couple a things real quick on this project. I think I will dye it first next time around and the incised carving ain't exactly as easy as it looks right off. But....here it is and it is what it is. Just bunkhouse stuff........
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150029.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150027.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150028.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150026.jpg)
Adios and hats off,
Horse Pen
-
Thats a beauty HorsePen!! You know I like that style a lot. I like your easy flowing lines. Keep it up!
DM
-
Well Dalton, if ya recall this set of holsters that you made last year....this is what got me started thinkin' about doin' this style of carving. Ya see? It's all yer fault!!! ;D
(http://i34.photobucket.com/albums/d133/lennowenoxie/DaltonMastersonSlimJims-1.jpg)
Horse Pen
-
Well, I sure aint sorry for that! Good job on those!
I am thinking of doing that to my saddlebags, if I ever get back to them.
DM
-
That's truly outstanding! I really like it. The cuts are smooth and even. Having fiddled with my freehand groover, I can understand it would be more difficult. The swivel knife cuts really accent the whole design and give it a depth way beyond what the groover would do by itself. I keep going back and looking at it. What a fine piece. A fella can get inspired with that. Thanks for sharing that with us.
-
Howdy HP
That is so very cool. I really like it.
WC
-
Howdy HorsePen
My thoughts echo that of the others, you do beautiful work anyway, I've never seen any work from you I didn't like, this holster is no exception, it is absolutely beautiful, Dalton brought this style to all our attention with the holsters he did, and they were equally beautiful, I really like your decorative knife cuts, I hope to be able to it this well someday myself, the way you used your free hand stitch groover nice and neat and looks like you just drew those line on, but I know it wasn't that easy, WELL DONE FOR SURE Pal. ::) :o 8)
tEN wOLVES ;) :D
-
Anyway,....here is a new experiment (to me) that I have been woking on. The old timey way of incised carving on the holsters has intrigued me but I have never tried it until now. Here is my first attempt at it. This is a slim jim pattern for a Remington revolver. The design I developed from a couple of old slim jim holsters in Packin' Iron. I took elements of design from the holsters I liked. Not an exact copy of any one perticular holster. I used the "free hand" stitching groover from the leather factory and a swivel knife. I learned a couple a things real quick on this project. I think I will dye it first next time around and the incised carving ain't exactly as easy as it looks right off. But....here it is and it is what it is. Just bunkhouse stuff........
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150029.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150027.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150028.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2150026.jpg)
Adios and hats off,
Horse Pen
Very, very nice holster.
Now, I have a proposition: how about if I buy some leather and you can experiment on the same design in a pair for my 1860 Armys. One left, one right, straight drop on both sides. I'll even pay for the shipping.
;D
You'll get the satisfaction of the experience and the knowledge that I'll tell everyone about your work.You can let me know whenever you stop laughing. :o
-
Thanks for the kind word fellas. Forty Rod, thanks for the smile as well......
Another thing I learned on this holster is that with my perticular tool...it cut smoother with a bit of moisture in the leather. I just dampened it with a sponge and it cut without any snagging or jumpin'. I guess washboardin' would be another way ta put it. :-\
A whole set of saddle bags and/or cantineas would be fun to make with this style of carving. I have been working on a paper pattern for a set of cantineas for a couple weeks and hope to get started on them as soon as school is out.
Anyway....thanks pards!!!
Hats off to y'all,
Horse Pen
-
HorsePen,
Beautiful work. Is that freehand on a pattern or do you use some french curves to guide you?
Wow! That is mighty fine work.
Johnny Dingus
-
Wow, the stitch groover really adds to it. Good call, HorsePen.
-
Howdy HP,
The incised carving absolutly Blows my mind :o :o :o. It is so elegent butt, it has a Western Theme to it! I apoligies that my spelling is bad and getting worse ::) The artistic influence that your incised carved holster, has gave me a new demention to there is know end!
This holster, and the holster that TW did the other day, the rig that Johnny McCray displayed, the pair of holsters that Johnny Dingus (a beginner),the great Dodge city holster hat HR. did, the spur straps that RM did, the Work that CowboyWC does, Will Ghormley does, the special native work that CB does, and I could go on and on and on,and no doubt I have left out at least 100 or more like Outrider and DC, all Master Leather craftsman. That each and everyone of you influence me in some way! Most of you guys have been doing this for a while, and then some of you have been doing it for years!
I admire each and everyone of you guys!! :) for no 2 of you have the same style!
I know that this got long, but I didn't want to answer like everyone else! I wanted to express that this show case is like going into a art gallery!
keep er coming!!
ACE
-
HorsePen,
Beautiful work. Is that freehand on a pattern or do you use some french curves to guide you?
Wow! That is mighty fine work.
Johnny Dingus
Howdy Johnny,
Naw, it's free hand. I imagine a fella could use a french scroll but it would take more time than it is worth to match all of those curves up with the template. Ya might give 'er a try though, and see how it works for ya.
It went a whole lot smoother after I dampened the leather a tad. I would recommend ya try that first instead of a French scroll template.
Ace, I agree with ya that this is a gallery of fine art in leather work. Can't find a better hearted bunch a guys than these to hang around with. Everybody here is good about sharing tips and tricks with everyone else here.
Horse Pen
-
Howdy HP,
Absolutely gorgeous! Very clean and neat! You have a real steady hand there. Many thanks for sharing this with us
-
Horse Pen, THROW IT AWAY ! ! !
PO 878, Sherwood Oregon 97140. I'll even pay COD for the postage to help you out
Seriously, that is beautiful work, very inspiring.
Thanks for taking time to share the pictures, JD
-
Well guys here is my second 310-yuma rendition. Next on to the belt.
Hope you like them.
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma011.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma009.jpg)
Johnny Dingus
-
That makes a fine pair, Johnny. Nice job matching them. It'll be great to see the whole rig.
-
Johnny that is a great match. Practice makes perfect.
Hats off to ya,
Horse Pen
-
Beautiful holsters Johnny, real nice job of matching colors, and your carving looks good too, 8)
TW ;) ;D
-
Nice job, Johnny!!
They look good!
DM
-
+1 on all the previous Johnny! Looks like you got one holster & a mirror. Kewel!!
-
You ROCK Johnny! Those really look great. Are you going to go for a matching belt?
-
Jonny those are great! I love that movie, both versions.
the new one is what introduced me to my "baby" a good ol Spencer Carbine. I was like, "wha!? no way! A Sharps with 7 rounds!" lol
is that a pattern for the 3:10 to Yuma or did you find it somewhere in the cyberspace?
onto the holsters themselves, what did you use for dye and what color was the leather to begin with?
awesome looking holsters, I was thinking of doing mine in that style too, but for 58 Remmies instead. I just love that pattern and style.
Great job.
-
Howdy johnny, :)
All I can say is AWESOME :o :o,
Those are smokin!!! :) You did a great job, and I won't get long winded like last time! I am like the others, I am ready to see the whole rig!!
thanks for sharing those for us to see! I am not near that brave yet!!
But I am working on it! Maybe someday!
Later ACE
-
Dingus, they came out terrific! This last one looks like you swiped Ben Wade's holster and rubbed in some Skidmore's.
Now how did Will Ghormley get that dusty look to his?
-
Good Question Santee, Good Question. It would be great if Will would share how he does that. On the other hand, the guy does this to put food on the table for his kids, so I can understand how a guy might want to keep some "Trade Secrets" to himself.
-
Mighty fine work there Johnny D.
Many thanks for sharing this with us
-
Thanks Marshall Will.
HorsePen I am practicing when will I be perfect?....... :) Thanks for your comments.
TW thanks my carving will get betterr the more I do it. But as always we know where the mistakes are in carving and what we would do a little different.
Dalton only 50 - 60 more and I might start looking as good as some of yours. I remember yours with the red white and blue shield wow. Thanks
Dr. Bob that mirror has a kink here and a flaw there. I think one is easier than two that are opposite sides. Thanks
JD the belt I am going to make will also be a copy of the one from the movie.
Willie, no pattern just made them off of the picture. This set has a little drop but the next set will be as original with no drop. Hopefully a little better. For dye I used a mixture of 50% evoo to 80/20 Feibings dark brown and USMC black.
Ace thanks, but you are that brave. You do great with all your leather work. Didn't I read some where you made a hat?
Santee thanks no skidmore's need to put that on my list of needs. Dusty look maybee wipe it down with Alcohol?
Thanks for looking Gents.
Johnny Dingus
-
Howdy Johnny
Good lookin holsters. Keep up the good work.
WC
-
Here is the finished holster. I just finished it up today.......
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2170030.jpg)
(http://i34.photobucket.com/albums/d133/lennowenoxie/P2170031.jpg)
All it needs now is a bit of burnishing and waxing.
Cheers,
Horse Pen
-
Horse Pen, nice holster!
man oh man, I know what she's holding!
-
Howdy HP,
Very very nice! Right out of the pages of "Packing Iron". Thank you for sharing this with us.
-
That really looks great, XP. Pure vintage for sure. Johnny M said it right. Thanks.
-
HorsePen
Man what you can do free hand, most of us couldn't do as well with a pattern, you're one heck of an artist Pard, this holster dyed up real nice, it's beautiful to say the least.
tEN wOLVES :D ;D
-
HP,
That sure is purdy!!
Get Job!!
ACE
-
HorsePen
All I can say is WOW!
Johnny McCrae and Ten Wolves said it....Out of the book andTalent....
Johnny Dingus
-
Thank ya gentlemen. I am glad ya enjoyed lookin' at it.
Horse Pen
-
Outstanding Horse Pen. Absolutely First Class.
-
Thanks Dave!
Art is a practice like doctorin' or lawyerin', only it ain't quite as critical when ya mess up.
I will endeavor ta keep on a practicin'. :D
Watchyerhair,
Horse Pen
-
Mighty fine HP, mighty fine. Free hand! Down right amazing! Thanks for the great pics, JD
-
Horse Pen,
I am totaly with JD on your new slim jim. THROW IT AWAY!
only send it to Texas not his way. He is better than me at this and i could use some quality work on my bench. Seriously though it is awesome
-
It is a down right dirty shame that I have to work for a living. Every time I do I get behind looking at all these great works of art.
You guys could maybe take up a collection and pay me to look ;)
I promise to work real cheap ;D ;D ::)
-
Howdy Pards, Ive been away a spell, but the hands have been busy and the mind needs exercisin too so here's the latest project,
just wanted somethin a little more comfortable to carry, should be good for the summer inside the waistband. Pardon the stiching
I'm still getting used to the walking foot machine!
Pokey Packrat
-
Oops don't know why but the other pic didn't come thru!
Pokey
-
Howdy P.P.,
Very nice job! need to get around and make me one, i just havn't felt good enough to get out in the shop! i like the way you did that, looks like it will be comfortable to were>
Thanks for sharing!
ACE
-
What do you mean by "Pardon the stitching?" I should do so poorly!
Everything about it looks good to me, very nice work.
Thanks for sharing, good quality pics by the way! JD
-
8) " LOOKS GREAT " Pokey nice neat job, that machine sure makes sewing quick, also those are neat little carry guns, you see a lot of these today, and the pards that carry them seem to really like them, especially with the Crimson Trace Lazar grips on them, light weight easy carry gun, back to your holster it looks well made and looks to hold this little revolver well, thanks for sharing. :D
tEN wOLVES ;)
-
Pokey, that is a really nice job on that little holster. Looks like it will work out really well.
-
You did a fine job on that holster, Pokey. That machine will make short work of a lot of projects. Lookin' good.
-
Howdy Pokey,
A very nice job with great workmanship! Many thanks for sharing this with us.
-
Thanks to all of you for you kind remarks and support, this forum does have the nicest and most helpful people anywhere, I believe I read another comment about this being a Family, well it sure seems that way to me also. It really feels good to help and
praise each other for a job well done. We should all feel Joy and give it our best, because I Believe we've been Blessed! Sorry there goes that soap box again. Best wishes to all.
Pokey
-
Howdy Pokey,
Nothing to br sorry for! It is a Big Family!! In my whole life, i have never meet a better bunch of pards in the world!!!
There is not one person on here that cares wheter you are a millonier or live out of a box!! The fellowship here is because we all have the desire to do leather work, and to improve! Very few start off as masters, but there is a lot of maters on here!
Later My Brother!
ACE
-
Hello in the camp!!
Howdy boys, any coffee left.
This is a great site, you boys do some great work!!!
After much cyphering...had ta take the boots off, I may just get some pics on.
Made this set for my son, he's more Injun than cowboy.
Been eyeballing yours fer a while...so here gos!!
Bad Hombre
-
Welcome aboard Bad Hombries,
mighty nice looking money belt and holsters, very nice, and thank you for sharing!
ACE
-
Welcome Bad Hombre, nice work Pard, I like the incised wolf on the holster
and the Indian influence on the moneybelt. Thanks for sharing and keep us
posted.
Pokey Packrat
-
Welcome to the forum Bad Hombre ;D it's good to have you join us
Seeing how I have a great love for the wolf, I really like what you have done with this rig, it looks quick and comfortable, I also like your use of the nickel spots, and like the way you adorned the belt and holster, it looks Indian. ::) :o 8) and your sketching of the wolf really works well 8)
Make yourself at home here Pard, we enjoy seeing others leather work here in the forum, so we will look forward to seeing your next project too. :D ;D
Regards
tEN wOLVES fIVE sHOOTER ;) :D ;D
-
Howdy Bad Hombre,
Welcome to CAS City.
Nifty way to make your first post.... with a beautiful Holster rig! I love the Indian look. Your son will be very proud to wear this wonderful gift from his Father.
Many thanks for sharing this. We look forward to seeing your future projects.
-
Nice rig, BH. Your son can wear that proudly. Nice frontiersman look. Welcome to the forum. Looking forward to seeing more of your posts.
-
Great job! Yeah, that belt is really original, too.
-
Well, thankee boys, the coffees good...think I'll stay awhile.
Thanks for the welcome, Ace, Pokey.
Been influenced by Injuns all my life, Granma was one!!
Ten Wolves, my son is a lover of Wolves also!!
The suede moneybelt, is very comfortable, really hugs the body and you can hardly feel the weight.
A real good thing fer my old hips!!
Kinda stretchy though, so I put a 2in web belt inside, end-cap to end-cap.
Sew the billets, cartridge loops, etc right thru the web material, lets it stay flexible and soft put strong.
Johnny, I had to find me a round-toit before I could post, Dang their hard to find!!
Marshall Will, I may have to wrestle them 58s back from my son...borrowed um don't ya know!!
Santee thanks for the complement.
Here's a look see at my old rig...getting a bit dinged up...that's antiquing!!
BH
-
How...(dy) BH...good looking rigs there...keep em coming...
I reallly liked that belt for your son, and the way the arrow concho was set over the stone look tooling...good job ;)
-
I really like your knife sheath! Welcome to our board.
-
Bad Hombre, I like everything I'm seeing Pard, well done on all, like Hank said keep them coming . :o ;D Those were good tips on the money belt, I belt one of mine that way too, and using a wider bullet loop will also stabilize the bullets better, like 1" works well for me. ;) :D
tEN wOLVES :D
-
Howdy Bad Hombre,
Very Very nice! Your work has a real distinctive and authentic look to it. You also have a neat way with words.
Please keep em' coming!
-
Very nice, BH. Another good rig. That Native American influence works nicely.
-
Hank, I like that stone look too!!
I just scaled that arrowhead up to billet size, cut it out and went ta womping it with a P-206 till it cried stop, stop!!
Dr. Bob, Thanks... and maybe you can help me!! Well I"m a..OK a...yes... I'm a knifeaholic!!
Can't seam to pass-up a knife, especially old ones, and I only live a mile from a Flea Market!!!
Ten Wolves, backatcha...good tip, now if i could only decide what size cartridge I'm gonna shoot!!
44-40s, 44 russian, 44colt,45lc...why why why can't cartridges be one length.
Thanks Johnny, for the kind words.
10 years of ROing...reading those cowpoke stories, n shootum-up bang bang scenarios, will give ya brainwash!!!
It's OK...my wife say's I got a dirty mind anyway!!
Marshall Will...Native American influence...really!! Hummmm
I think you could be right...I'm noticing a pattern here.
I made these about 10 year ago.
BH
-
Well my goodness BH, this is right out of the pages of "Packing Iron" Pretty neat stuff you do there.
-
Well Bad, ya'll mite be new to the fire but ya does seem to no yer way aroun them ol' hides. Beyoutifful plunder if I ever did see it. Gun Butcher ( what knos his way aroun the supper table bettern anywheres else.)
-
Very nice rig, BH. I like the spare cylinder holder. Good idea to make it with the slot so you can pull it out easily. Is there a spring inside that?
-
Well Johnny I done wore out by Packing Iron, eyeballing it so much!!
Gun Butcher, inside them old hides there is some pretty neat stuff, just gotta sneak up and grab it.
Kinda like snatching a biscuit from the chuck-wagon!!
Marshall Will, no spring, but its metal lined to keep its shape and the bottom is sewn to keep it nice and round.
The slot lets ya get the cylinder back in too!
The finger holding the cylinder, passes thru and there it is safe as can be.
I like using my 58 Remington and 2 R&D cylinders, switching for the second pistol...Pale Rider style.
I pull the empty cylinder, than with one finger and thump, bring the new loaded cylinder out and drop it in to the 58.
Place the empty back into the holder...I'm a shooting again!!
Ya can get pretty quick with it.
The most important part is the hole in the bottom, so ya can get your finger under it.
It's different and that makes it fun!!
Thanks for the words!!!
BH
-
Howdy Guys
Sorry I have not made too many comments on the fine work being shown.
Ribs just hurt too much bending over typing.
Keep up the fine work.
WC
-
Well Bad Hombre, it just gets better , nice rig, you have quit a talent Pard, keep them coming, we love looking ::) :o 8)
tEN wOLVES ;) :D ;D
-
Hey there Bad Hombre, welcome, and very nice work you have shared, you must have been diong this for a while. JD
-
Attached are pictures of a couple of projects I just finished for friends.
The person I made the Saddle Bag-Holster combination also wanted to be able carry a Walker Colt in addition an 1873 SAA. I made a Walker Colt Holster with a tongue on it. The tongue fits in between two tab's on the cross over strap and is held in place with three Concho's. By the way that Walker Colt is one heavy pistol. Here is a clip of Gus (Rorbert Duvall) whacking a surly bartender with his Walker Colt. http://www.youtube.com/watch?v=pVBjBClBSao
Also shown is a Holster and belt I made for a friend's Kimber.
-
Howdy Johnny,
All I can say is AWESOME :o :o, those look great, your friend will be super happy to have them!!!!!
If he isn't send them my way ;D ;D
They realy look good, and anyone would be proud to own them!! I am glad to see you putting out some more of your goodies!
i havn't been doing any leather work for a while been trying to get some guns put back toghter i have been working on, plus making a few tools! And watching a lot of carving video's, got the bug bad!! But I also need to improve on my stamping!
And good old mother nature, gives us one good day, and then 3 or4 bad ones, and my Uncle Arthur, does know when to leave, and I still don't have a Doctor???
Keep up that super good looking leather work!!
Thanks for Sharing!
ACE
-
Howdy Johnny
Nice work all around Pard, I like your design, this whole outfit looks like its right out of Packing Iron, you really are honing your art, Well Done. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Oooooooo, that's pretty neat. I like that Walker set up!
Horse Pen
-
Howdy WC, hope them ribs heal up!!
Know how ya feel, detached the muscle's from the ribs awhile back.
At least it only hurts when ya breath!!
Thanks Ten Wolves, let a lot of stuff get away without pictures, but I gots one of them digit photo boxes now!!
Now if can just get the darn thing to focus right...or stop shaking it...too much trigger pull!!
Thanks for the welcome JD...did a lot of wallets and purses, when I was a kid...ta help Ole Ma with the grocery bill.
Then SASS & CAS came along and I said... I can do that!!
Here's a pic of the first project...the Ole purse is 52 year old...why couldn't I have aged like that?
$24 each...back in 1957. darn I only took home $32 a week about 8 yrs later!!
Didn't know why back then, but the women folks always had more money to spend then the men did!!
Johnny, those are nice rigs...That walker rig would be great for carrying a back-up pistol at matches.
Something I seam to need...breaking pistols a lot lately!!
That Kimber rig is very unique...great protection!!
Nice work!!
BH
-
Hank, I like that stone look too!!
I just scaled that arrowhead up to billet size, cut it out and went ta womping it with a P-206 till it cried stop, stop!!
Dr. Bob, Thanks... and maybe you can help me!! Well I"m a..OK a...yes... I'm a knifeaholic!!
Can't seam to pass-up a knife, especially old ones, and I only live a mile from a Flea Market!!!
Ten Wolves, backatcha...good tip, now if i could only decide what size cartridge I'm gonna shoot!!
44-40s, 44 russian, 44colt,45lc...why why why can't cartridges be one length.
Thanks Johnny, for the kind words.
10 years of ROing...reading those cowpoke stories, n shootum-up bang bang scenarios, will give ya brainwash!!!
It's OK...my wife say's I got a dirty mind anyway!!
Marshall Will...Native American influence...really!! Hummmm
I think you could be right...I'm noticing a pattern here.
I made these about 10 year ago.
BH
That is a nice rig, Bad Ombree. It might be only ten years old but it looks like something out of Packing Iron that could be as old as a 125 years old or so. Nice piece a work.
I like the tooling on that purse too.
Nice early looking stuff.
Horse Pen
-
Bad Hombre, you're just full of surprises, this purse you made has really held up well, and has taken on a nice patina that is real pleasant to the eyes, and I like your lacing, I like the double loop myself, it always looks good kind of gives lacing a classy look to it.
tEN wOLVES ;) :D
-
B.H. AWESOME
That is something for your first and 52 years old!
Keep er coming!
ACE
-
Bad Hombre,
You've turned out some mighty fine work in your time. Hope your here to help all us youngsters. That purse looks great for it's age. And the carving shows very nice work.
Johnny your friend ought to be mighty proud to have those leather goods. If not there are a lot of people willing to bid on them right here.
Johnny Dingus
-
Howdy All, Many thanks for the kind words. I greatly appreciate the encouragement!
TW hit the nail on the head... Bad Hombre, you are full of surprise's. That is really cool to have something you made over fifty years ago. A beautiful piece of work also!
-
Attached are pictures of a couple of projects I just finished for friends.
The person I made the Saddle Bag-Holster combination also wanted to be able carry a Walker Colt in addition an 1873 SAA. I made a Walker Colt Holster with a tongue on it. The tongue fits in between two tab's on the cross over strap and is held in place with three Concho's. By the way that Walker Colt is one heavy pistol. Here is a clip of Gus (Rorbert Duvall) whacking a surly bartender with his Walker Colt. http://www.youtube.com/watch?v=pVBjBClBSao
Also shown is a Holster and belt I made for a friend's Kimber.
Those are some nice holsters. I want to get up to San Marcos to Texas State University (Used to be Southwest State) and see the Lonesome Dove Exhibit they got, They even got Gus's Dragoon and gun belt on display :o ;D ;D
(http://alkek.library.txstate.edu/swwc/ld/images/gusgun.jpeg)
-
I was out of phone service, as was most of four counties here, since yesterday evening. Deliberate sabatage, the news says. No long distance, no cell service, no credit card processing so lots of businesses were closed. Banks closed. It was like living on an island with no phone lines. We couldn't even make calls to neighboring towns. I come back online tonight and all this great stuff is posted.
Darn nice work, Johnny M. I like the way you used the conchos to make the holsters interchangable. That kimber looks happy, too. Good job(s).
That is a fine job you did on that purse, BH. Just the right amount of floral work. The braided edge makes it complete.
Good to see the rig Gus wore in the movie. Thanks for posting the pic.
Thanks for all the pics, pards.
-
I was out of phone service, as was most of four counties here, since yesterday evening. Deliberate sabatage, the news says. No long distance, no cell service, no credit card processing so lots of businesses were closed. Banks closed. It was like living on an island with no phone lines. We couldn't even make calls to neighboring towns. I come back online tonight and all this great stuff is posted.
Darn nice work, Johnny M. I like the way you used the conchos to make the holsters interchangable. That kimber looks happy, too. Good job(s).
That is a fine job you did on that purse, BH. Just the right amount of floral work. The braided edge makes it complete.
Good to see the rig Gus wore in the movie. Thanks for posting the pic.
Thanks for all the pics, pards.
Man if phone service went out around here.........I can't imagine all the stuff I could get done without someone bugging me every minute ;D
No prob posting Gus's rig, here's the link to the website the Library in San Marcos put up
http://alkek.library.txstate.edu/swwc/ld/ldexhibit.html
Pretty much it's what I do for the one shoot I've done and when I go Hog hunting, take my belt out of my belt loops and just slide a pistol and sticking knife on it and I'm good to go. Wish I could find that brass Lone Star buckle though...
-
Howdy All
Definitely some fine work being posted lately.
I managed to finish the belt for my Walker and D-guard. Just have to put a coat of Skidmores on tomorrow. It will be ready for the San Berdo fair.
WC
-
I guess the Vicodin has me a little fuzzy, forgot to add the pix.
WC
-
Howdy WC,
Beautiful job on the Walker Rig & Sheath! You have created a real work of art! Many thanks for sharing your talents and expertise with us.
-
Beautiful, WC. Does it come with matching carved and tooled leather suspenders?
Somethin' ta keep the belt up? ;D ;D ;D
Thanks for sharing the pictures. Real nice.
Horse Pen
-
WC,
Beautiful work. You nailed the spacing of your stamping. It looks completely balanced side to side at the buckle when you have it on.
Vicoden?....I would think it might have been a combination of that and the hour. Up a little late for a work night? ;D
Have a good show and enjoy.
Johnny Dingus
-
Man oh man, what nice looking carving. It doesn't seem possible to me that anyone could do work like that. WC, you are without a doubt amazing!i would love to watch that being done, but I know it would be a long DVD! I hope you are feeling better after your spill, JD
-
Superb, WC. Great looking outfit. A-No. 1.
-
Well Tricky Ol Russ...eyeball these!!
http://www.blockaderunner.com/Catalog/catpg20.htm
One place ta getum.
Thanks for the words boys, but lets get something straight...that's Ole Ma's purse!!!
I'm justta holding it for her until we meet again. ::)
Marshall Will...sabatage???...there's crazies out there!!
We sure don't know how dependent we are to today's technology, until we loose it!!
Like when your cable goes out during your favorite western!!!!!!! OOOH no can't go out during the news!!
WC...WOW!!!...Thats eye-candy for sure!! Beautiful piece of art!!!
BH
-
:o :o Howdy WC,
The word AWESOME doesn't do that rig Justice!!! It is so beautifull!! The design it self blows my socks of :o But the Carving, stamping, the color and period style is smoking!! I cannot imagine how many hours you have in that, but is has got to be a lot! As hard as it is to believe ??? i am lost for words!! I wish I could express how that wonderfull peice of 1800's art makes me feel. Question, do you lay this all out on paper before you start, or is it just done as you go?
Thank you so much for sharing the beauty of that rig, because that gives beginners like me something to shoot for years downn the line! but with out inspiration, it would be easy for me to just lay in bed!! Not only just your rig hear, but anything that you all share, keeps me going!
Thanks so much for sharing this for all to see!!
it is a knock out!
ACE
-
Beautiful, WC. Does it come with matching carved and tooled leather suspenders?
Somethin' ta keep the belt up? ;D ;D ;D
Thanks for sharing the pictures. Real nice.
Horse Pen
Howdy Pal
I was thinking it might need them when I was making it but it seems to stay up pretty well. But then again you never know :)
WC
-
WC,
Beautiful work. You nailed the spacing of your stamping. It looks completely balanced side to side at the buckle when you have it on.
Vicoden?....I would think it might have been a combination of that and the hour. Up a little late for a work night? ;D
That ain't late, that's my normal.
WC
-
Howdy All
Thank you all for the kind words. I had a lot of fun making this set. It's only taken me a year to finish from the time I go the knife.
I was not sure how that buckle set was going to work the way I did it but it's not too big a pain.....
Ace I normally do lay out all my carving patterns but since I pieced this together over a years time I just kinda winged it on this one.
WC
-
Howdy WC,
Beautiful work as usual, all I can say pards is , if you think these pictures are great, you haven't seen anything until you have seen his work up close and hands on, WELL DONE, it makes me proud to call myself a student of yours. :D ;D 8)
tEN wOLVES ;) :D ;D
-
W.C.
I'm New to this forum, I just had to comment on that rig !
Beautiful Craftmanship ! ! !
-
TW
Thank you for the kind words.
When you enjoy what you do the good stuff just starts happening.
Craftsman
Thank you and I hope to see some of your work soon.
WC
-
Beautiful work, Wayne. As usual, I'm really impressed. That border stamp really does make your fine tooling look good.
Marshall Will...sabatage???...there's crazies out there!!
It was the old union/company fight again.
-
Well Tricky Ol Russ...eyeball these!!
http://www.blockaderunner.com/Catalog/catpg20.htm
You da man Hombre!! Thank you, thank you thank you!!! ;D(http://www.phpbber.com/phpbb/images/smiles/notworthy.gif) ;D(http://www.phpbber.com/phpbb/images/smiles/notworthy.gif) ;D(http://www.phpbber.com/phpbb/images/smiles/notworthy.gif)
Ahhh, got a good info forum for Kayak fishing and now one for CAS ;D tons of good folks on here ;D
-
Man, that's nice, WC!
-
One of the boys brought me this knife and wanted a sheath to go with his outfit.
What a awesome little knife!!!
140 year old civil war... saw handle? I believe??
Anyone ever see one like this???
Finished his sheath today...here fer a looksee!!
BH
-
BH,
That is AWESOME, I realy like they way you did the sheath, it is very clean lines, but it has the flare of a officer's knife and shealth!! very well thought out!
Keep um coming the inspiration of you hot dog's work keep the blood flowing!
Later ACE
-
Howdy BH
Good lookin sheath. I like the knife too. It does look like a saw handle.
WC
-
Howdy Bad Hombre
I just knew you had more stuff to show us, that is a beautiful knife and sheath, they look period for sure, thanks for sharing, your lacing is top notch, the steel on the knife looks to be really old. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Thanks for the words boys!!
That knife is an original civil war, so says my pard.
Ya can feel the history in your hand!!
My hand don't want ta let it go, but I recon I'll have ta!! :'(
BH
-
Beautiful work BH, I can see where you wouldn't want to give it back...
Lovely lacing and the medalion sheild looks great the way you framed it with leather.
Johnny Dingus
-
Howdy BH,
Another beautiful piece from your workshop! Keep em' coming... your work is a pleasure to look at.
-
This one is for Rolling Thunder
hey pard heres your frogahyde with my cell phone case how the to got together to make this we may never wanna know LOL
but hope you pards like it enjoy
Cowboy316
-
Nice sheath, BH. I like the laced seams and the brass US on it. Good work.
That frogahyde looks good on a cell case. Nice job.
Thanks for the pics, pards.
-
Cowboy316,
That looks real cool!! great job!
Keep them coming!
ace
-
Howdy Pards,
This is not your standard "western" style holster, however it is gun leather. Just finished this "pancake style" CC holster for a fellow shooter. The pistol is a Ruger SP-101 .357 with a 3" barrel. I really like this gun and I think I will end up buying one of these as soon as I can locate one. The color is the mixture (saddle tan and medium brown) that Don 101 posted in here months back.
-
Nice pancake, Outrider. I really like the rich color. It's a clean, quality-looking item. Nice work. A friend of mine had one of those shooters and really liked it. I tried it and it was impressive.
-
Outrider,
Very nice Pancake holster, with some nice bording, that realy breaks it up from the norm!
I Like IT!
ACE
-
Howdy Outrider
Good lookin holster.
WC
-
Howdy Outrider
Well you did it again, what a sharp looking pancake holster, you have that nice grip forward cant that makes for an easy draw, the border trim is spot on perfect, and Dons recipe for the color works real well.
Those SP-100 are dandy little guns, they're well built , and you can always rely on it, not to mention they're easy to tot around because of there size. I have a Ruger Security Six, which was the model before the SP-100, IT HAS A 4" barrel and is blued, a Friend gave it to me, and it's never been fired, this is another nice little carry gun.
tEN wOLVES ;) :D ;D
-
Outrider,
Beautiful clean lines nicely sewed. Looks like you have a winner in my book.
Johnny Dingus
-
Well I previously posted pictures of these holsters without the belt.
So I have done the belt now and wanted to post it to see how you guys like it.
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma015.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma014.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma013.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma016.jpg)
(http://i26.photobucket.com/albums/c105/BlueViffer/310toyuma017.jpg)
Thats about it for now.
Johnny Dingus
-
Howdy Johnny
That's a good lookin rig. Well done.
WC
-
That looks really great, Johnny D. It looks balanced and the color is very sutiable for it. Very nice rig, pard.
-
Howdy Johnny
Hot dang you did a beautiful job on the belt/rig, you're really cooking now Pard, everything is nice and neat, your lines come together, and your border is right on line, did you use brown thread on your billets, it's so clean I can't even see any stitches, this really looks like the 310 to Yuma rig, all you need now is a cross on your grips.
WELL DONE JOHNNY ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Knocked it out of the park!!
-
WC thanks I would have had the belt done a little while back but the billets weren't even when buckled. This is my first belt like this so I wanted the billets even and had to make up new ones before putting it together.
Thanks Marshal Will I like a little bit of mis match when making a rig up. I think in the old days the local leatherworker would probably been fine with it and not to picky.
tENwOLVES still trying to come up to your level of work it takes time but each one is getting a little better. No stiches in the billets yet will be doing that tomorrow night. I spent most of today working on the belt and am just a little anxious about showing you guys how it came out. Going to put on a belt loop for the front tip of the belt to go in also. When I get a little ahead I hope to get some copys of those grips.
Thanks santee now for the other two with no drop. Hopefully they will look as good with this belt.
Johnny Dingus
-
Outrider, that is one pro looking holster. Everything about it is outstanding. I especially like the coloring and stamping, but it's all real good. Johnny D. great job on the belt for that holster set you made. It looks like a pro set up to me, nice work.
It has been a long week, but I am making small steps toward complete recovery.
-
JD, thanks for the compliments. Glad to hear you are making steps forward. Don't think of them as small steps added up they make a big move forward. We are all praying for you and if you need anything if it is in our power we will help with just about anything you need.
Johnny Dingus
-
Johnny, that is a very convincing job of aging you've done there. Congrats.
-
Howdy Johnny
Well Johnny, I feel better, I thought my eyes were playing tricks on me, I think you are making big improvements with every piece you make Pard, and I know you can see this too, that's what is so rewarding about working with leather, it just gets better with everything you do, show us a picture when you get the billets sewed and the keeper in, again I think you did an outstanding job on this one. :o 8)
tEN wOLVES ;) :D ;D
-
Howdy Outrider & Johnny D,
Very nice work Pards! A pleasure to look at! Many thanks for sharing your talents and idea's with us.
-
Thanks for the kind words.
Johnny D....good looking rig very well done my friend
-
Just got to get in line here and say great job guys... :)
That Ruger holster is top notch Outrider, very classy look. 8)
Johnny, you're in now aint ya....aint no stopping now...I like the look, good job!!!
keep em coming... :D :)
-
Wow, I feel like I have missed a bunch of great stuff!
WC, nice belt and Walker rig. Top notch as always.
Outrider, nice pancake for the SP101. They are a good revolver to have. Very tough, and still fun to shoot.
Bad Hombre, interesting handle on that knife. Nice sheath.
Johnny, nice work on your 310 rig. Looks good and old.
DM
-
Johnny D., :) :o
AWESOME, AAA plus job! This is getting bad, i am dreaming of working on leather (or was that some gal wearing leather that I was working on?) :o :o)
I just love this hobby, and there are no restrictions! You can work on it when you want, you can stop when you want, if you don't like the way something is looking you can just change it a little! The next best thing, is it is a never ending learning experence!! And you know whats funny, I have made 10 or so rigs, about half for me, and the rig I like the best, is the first one I made!! i was told to get Al's book, I had 8 tools, had no idea in the world of what i was doing, I use Ritz dye, to color it, I had a old worn out suede jacket, and I use it to line it! ::) ::)
And the Best Thing, Is you get to Share It With OUR GREAT BIG FAMILY!! :) :)
Later Pards
ACE
-
Cudos to Outrider on his slick pancake holster and Johnny D on his new rig.
Outrider, the color turned out great. As you may have guessed, that's within the hues that really strike a chord with me personally. Nicely done, pard.
Johnny: Nice job, there, pardner. Looks like a dandy. You're off and running now.
-
Dave..the color actually looks much richer than shown in the photo. Thanks to Don 101 for that mixture...1 part Fiebings Med. Brown to 3 parts Fiebings Saddle Tan. I have had alot of interest in this color since I started using it so, I mixed up a "ball jar" full of it... ::) ::) :D ;D.
-
This one is for for JD god bless my friend and hope your doing well
bible cover i started last night got all the floral carver kinda scared of the lettering but ill get it LOL
god bless and enjoy each and everyone of you
Cowboy316
-
Howdy CB316,
That sure is looking good!! JD will love, because I din't know anyone that wouldn't!
Maybe someday ::) ???
I did i knife sheath yesterday, it lacks a lot, but maybe the next one will be better?
Thanks for sharing!!
ACE
-
Howdy Cowboy
Good lookin pattern. Can't wait to see the finished cover.
WC
-
Very nice, C3. Great design. I also am looking forward to seeing it done.
-
Here is a purse that I'm making for my wife. It is in progress. I also posted one I made for my mother about 10 years ago.
-
Great job guys...just looking at those, made my hand cramp..... :D
thanks for sharing
-
Very good work, BB. The one you made 10 years ago is beautiful. The new one promises to be as good. It'll be nice to see the finished project. Thanks.
-
Howdy Big Bear,
Those are beautifull, many hours you have in them!! I just think they are top rate!!
Thanks for sharing!
ACE
-
Howdy Gents ;D
CB316 Nice work pard, and a very thoughtful thing to do , I look forward to seeing it finished.
Welcome to the forum Big Bear Johnson, it's good to have you join in with us, we can see you have been at this for a while now, beautiful work pard, bet your Mrs. really loves it too, feel free to share your work with us Pard, like Marshal Will says we love pictures. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Well, here we go again trying to play ketch-up. You all are doing some great work,Outrider, Johnny D. C316, BB. I wish I could get on here on a more regular schedule so I could keep up with it.
-
Cowboy316 it's going to be beautiful when done. Looking great right now.
Big Bear welcome and this aint your first rodeo. Purses look great. If your looking for someone to shoot with my club will have you.
Johnny Dingus
-
thanks for the nice compliments. I haven't made much in leather for a few years and have just started back again.
I made a holster rig for my son who just started shooting SASS. It's a bit rough but it works. I also made a small pick guard for my guitar also as a get back into it project.
Thanks for the offer to shoot. I've been shooting with the great gang "The Deadwood Boys" lately.
When you take 10 years off, you find most of the old posse has moved on from the clubs I used to shoot at.
It's fun to be back at both SASS and leather work.
-
Classy looking rig and guitar guard BBJ, subtle is just as good as fancy amigo ;) ;D ;D ;D
-
Howdy Big Bear
Very nice work.
Would that be the Deadwood Boys out of Piru ? If so you are local, my leather shop is in Reseda. Stop in and say Howdy sometime.
WC
-
Howdy All
Well it's done, finish is dry and the keepers are on. It goes to the fair Friday.
WC
-
Howdy Cowboy 316,
What a beautiful gift to give! I look forward to seeing the finished piece. It's always nice to see how a project will progress from start to finish.
Howdy Big Bear Johnson,
Welcome to the forum! As the Pard's have said, you are not new to Leather Working. Very nice work! Thank you for sharing this with us.
Howdy Cowboy WC,
Many thanks for showing us the finished project. You have created a real work of art! Best of luck to you at the Fair.
-
WC
very snazzy rig love the tooling pattern where do you get patterns like that the keepers on the belt are way cool
and the deco ccuts on the belt add a unique twist to it very cool
keep it up pard
wish i would have know my dad was going down that way i would have gone with him and dropped by but ill get there some day LOL
take care
COwboy316
-
Big Bear,
I think that is is AWESOME and don't see anything wrong with it my self!! You called it a little ruff, I would hate to read your thoughts on my work :o ???
Thanks for sharng, and your son needs to be proud to were that!!
WC,
YOU ARE KILLING ME :o :o :o :o What a rig 8) 8) A pure materpeice of Packing Iron Leather work like some rich Texas Cattle Baron would where when he went to town to show off!! Only in my dreams would I think I could create something so beautifull, and the color knocks it out of the Park!! Grand Slam!!!
WC, the greatest thing about dreams, create goals to work harded to keep the drive going, that maybe someday!! but even if a person never makes it to that level he or she will only get better!
I thank you for sharing that peice of art to all of use, I can only speak for one rookey leather craftsman, but it gives me hope, and the drive to get up out of this bed and get out there, and get after it!
My Hat it off to you!
ACE
-
hOWDY All :D
WC, the finish came out great , the keepers really put the finishing touch to it, it's definitely museum quality for sure. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Dang...WC...that's right purdy...good job...as always... ;D ;D 8)
-
Fine work, BB. That pick guard is a fine one, it balances the guitar nicely. Your rig is really nice, too. That's a good look. Are those your match holsters?
Beautiful, WC. I love that border stamp. It really does look good. The whole rig is balanced nicely. You''ll wow them at the fair.
Thanks for the pics, pards.
-
Howdy Big Bear
Very nice work.
Would that be the Deadwood Boys out of Piru ? If so you are local, my leather shop is in Reseda. Stop in and say Howdy sometime.
WC
WC, your work is great. Top notch. That is the Deadwood Boys of Piru. I'm in Burbank so we are neighbors. Where can I find the address to your place, I'd love to stop by.
I used to hang out at Al Shelton's shop years back. It's great to get to see master craftsmen like him and yourself.
best regards,
BBJ
-
WC,
WOW! That rig will drop a lot of jaws at the fair. Very impressive word!!
;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
-
WC
very snazzy rig love the tooling pattern where do you get patterns like that
take care
COwboy316
Howdy
The Sheridan pattern on the sheath & holster are a portion of a larger pattern I found in a pattern book. I am not an artist, I have drawn a few of my own patterns but the were not to good. I will find a section of a pattern that fits the area I am working on.
The overall design I just came up with.
WC
-
Only in my dreams would I think I could create something so beautifull, and the color knocks it out of the Park!! Grand Slam!!!
WC, the greatest thing about dreams, create goals to work harded to keep the drive going, that maybe someday!! but even if a person never makes it to that level he or she will only get better!
Howdy Ace
Working to get better is what it is all about. I have masters that I strive to be as good as. I started working it stages, I'd find someone who was a little better that I and worked to be that good. Then I would find another & another.
Someday I hope to be as good as Bob Beard, Barry King, Rick Bean and Peter Main. These are my heroes.
WC
-
WC, your work is great. Top notch. That is the Deadwood Boys of Piru. I'm in Burbank so we are neighbors. Where can I find the address to your place, I'd love to stop by.
I used to hang out at Al Shelton's shop years back. It's great to get to see master craftsmen like him and yourself.
best regards,
BBJ
Howdy BB
My shop is at 7624 Tampa Ave. Reseda.
I was just up to visit Al a couple weeks ago. If you come by I'll show you pix of Als last piece. I can not post them til after the company he made it for gets it to their museum.
WC
-
Wow, I don't know where to start. Cowboy 316, that is one heck of a carving job on the Biblecover. I am very impressed, and look forward to seeing it completed.
Big Bear, welcome to the Forum. There's a great group of guys here, as I'm sure you've figured out. YoU've done some very nice work, thanks for sharing..
WC, you knocked this one out of the park. I hope the people at the fair know what's involved in producing this kind of quality, functional art.
Outrider, did you use the dye at 100% ? The color is outstanding.
I went to physical therapy for the first time yesterday (Tuesday) That woman tried to kill me, and wants me to try to kill myself every day of the week. Man, I didn't realize how out of shape I am
I sure am looking forward to being able to do some leatherwork soon. God bless you guys, JD
-
JD,
First of all...how are you feeling...I hope you are progressing. The color was a 3 to 1 mixture that Don 101 came up with. 3 parts Saddle Tan to 1 part med.brown. I have had so much interest in this color that I just mixed a small "Ball Jar" full. After it dried and after casing it... I sealed it with Bag Kote and one application of neutral shoe polish
-
Big Bear ,you do some mighty nice work, I really like that pick guard. It gives me some ideas for my own guitars. Does it change the tone at all?
WC, that is some kinda rig man. Do you do a lot of work in your sleep, cause it seems like you post a lot in the wee hours of the morning quite a bit. However, whatever you do keep it up. It keeps the rest of us inspired to do better.
JD, its good to see you back on here. Sounds like that "no pain, no gain " thing has got you moving again. It won't be long till you are back. GB
-
Howdy GB
Thank you for the kind words.
I don't do in my sleep but I do think about it in when I sleep. Most nights I'm here til about 3am. But since I only get 3 hours a night I'm not thinking too much :)
WC
-
hey guys update on the bible cover the back cover part is all back grounded basket stamped i got a little off but sort of fixed it this new basket stamp is kinda tricky and the border is stamped now gonna do the beveling and finish stamping on the back today or try to LOL
Cowboy316
-
Beautiful....nothing else to say.... 8) :)
-
Hank just wait till i get the cover going my hand was cramped so bad it hurt for days after carving it LOL
Cowboy316
-
CB316, Like Hank said beautiful ;D ::) :o 8)
TW ;D
-
Howdy CB316 :),
Hey Bud, Like Hank and TW said, it is Beautiful, I can't wait untill it is do!! No doubt it will be a master peice :o :o
Thing like that keep me dreaming!!
Thank for keeping us up to date!
ACE
-
Cowboy, that is beautiful , like the rest of the bunch said, it truly looks inspired. GB
-
Big Bear ,you do some mighty nice work, I really like that pick guard. It gives me some ideas for my own guitars. Does it change the tone at all?
GB
The pick guard doesn't change the sound. I removed the old one which was the typical plastic with double sided tape. THis would have about the same amount of muting that the old one would have, maybe less. I wouldn't do it to a vintage CF Martin or something really nice though.
-
Howdy Cowboy
Lookin good. Nice depth on the background. Tri-weave came out good too. Can't wait to see it finished.
WC
-
Very good work, Cowboy. You did a nice, even job of the basket weave. Good progress.
-
Hey Cowboy,
Nice looking Bible cover! I've got one of those tri-cornered basket weave stamps. Really like the look of it and have used it many times. Good looking carving too. Waiting for the finished product to be posted.
Corkscrew Tom
-
Outrider, I was assuming (always dangerous) that you were using the dye full strength, it sure did come out nice.
Cowboy 316, that cover just gets better looking as you move forward with it. I bought a tri-weave stamp just before the stroke.
I hope my efforts look as good as yours do. Your carving has a great 3-D look to it. It's outstanding.
WC, 3 hours sleep a night? I thought I was bad with 5 or 6!
God bless, JD
-
thank you guys for the kinds word its you guys and the fact i have my leather wrok keeping my mind on what is most important to me and right now thats me and my health you guys keep me smiling and wanting to strive to do better and keep moving forward and thats all i know
Thank you guys
Cowboy316
PS heres an ok pic of the whole cover most carving is just back grounded will start the rest tomorrow seein how im not going any where cuz of the blasted snow we are gettin right now
hers a pattern i put together for another cover but not sure what i wanna do for the other side maybe a full floral in the same pattern but who knows
-
Cowboy 316, the Bible cover looks like you drew it with a brown pen (that's a compliment) Your lettering is first rate. Nice work. Sorry about the Snow. In NW Oreogn we have a lot of rain, but not too much snow. It's suppose to be close to 70 tomorrow, and I'm going to go watch my club shoot (not up to shooting yet) JD
-
JD, glad to hear your doing well enough to get out.
Here's some more projects I've working on lately. A couple of seat covers, and knife sheath.
Corkscrew Tom
(http://i722.photobucket.com/albums/ww226/corkscrewtom/KnifeSheath.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/Seat1.jpg)
(http://i722.photobucket.com/albums/ww226/corkscrewtom/Seat2.jpg)
-
Howdy Corkscrew Tom ;D
Nice work all around Pard, you're a real artist to say the least, thanks for sharing ::) :o 8) :D
tEN wOLVES ;)
-
howdy C.Tom, :)
Those are great looking seats! i dream of the day I could do something like that!
Thanks for sharing!!
ACE
-
That looks like numbers 2 & 3 of your seat set. Nice sheath, too. Good work.
-
Thanks Guys,
Yes it is #2&3 with a few more orders coming. I've dabbled in several medias over the years but leather is my favorite. It's rewarding to do something that will be functional, good looking and last.
Stamp at ya later CST
-
Howdy Cowboy 316,
The Bible cover is coming along great!. You have a real talent there.
Howdy Corkscrew,
Beautiful work! As TW said, you are a real artist. Many thanks for sharing this with us
-
Corkscrew, your carving is very inspirational. I would love to be able to do someting like that. One of these days.....JD
-
Well I'll be dipped in ... well ... I'll just be dipped. That looks really nice corkscrew! Very good work on those.
I'll have to go back and catch up now, but for the time being, here's a few pics of some of the stuff I've been working on of late.
Yes, this is the War Department, and no, she is not the same size as the person I made these for, so the fit will be much better when that lady wears them. Somehow, I forgot to ask her the length to her knee from her waist, so I haven't fringed them yet.
(http://forums.horsecity.com/uploads/1239845054/gallery_20846_883_54175.jpg)
(http://forums.horsecity.com/uploads/1239845054/gallery_20846_883_31923.jpg)
(http://forums.horsecity.com/uploads/1239845054/gallery_20846_883_30224.jpg)
(http://forums.horsecity.com/uploads/1239845054/gallery_20846_883_29942.jpg)
Hope you like them so far.
-
Howdy RT,
Very nice! Real professional looking with excellent workmanship! Look forward to seeing them with the fringe on.
-
Howdy RT
Those do look good. Nice job.
WC
-
RM,
Those are AWESOME!! I realy like the way you made those!! If you don't mind me asking, what kind of leather are the legs made out of and what weight? It is okay if you don't want to answer, that is okay! I understand that this is your living!
I thought about making a pair but just for fun, and I don't want to have a ton of money tied up!
Thanks So Much for Sharing!!
That are AWESOME!
ACE
-
The legs are made out of a standard Tandy deer-tanned cowhide. It's a tiny bit stretchier, so it makes for a good chap leather, IMO, because it doesn't bind up at the knees. It's 4 oz.
I bought a whole hide, which I got on sale half-price during a recent sale (got several of those coming up). The color is good because it's pretty neutral. Glad you like them.
Oh, and it's not my living. LOL. I'm just as leather-poor as most of the rest of us on here. LOL.
-
Corkscrew those seat's look very nice. Hadn't thought about seat stools. But those are very nice and would set off a country house.
RT those chaps look almost finished. Did you make those from a pattern or just off the top of your noggin? Another item to put on the to do list.
Thanks for posting and giving me more inspiration.
Johnny Dingus
-
Hey Johnny. The basic layout of the yoke is essentially all that I took from a pattern purchased at Tandy. I thinned the belt yoke dramatically, and the lady I did these for didn't want leg plates, hence the Vaquero-style buttons on the side (actually, they're D-Rings with blood knots with a heavy 5/8" latigo leather- Vaquero style on Armitas would be a leather roll button through a reinforced hole in the leg).
She wanted them to buckle back and front (normally, it's one or the other, not both), and wanted her name on the billet of the back belt. I had enough room for the initials. LOL.
I decided to lace in the billet and chape as well, because she mentioned that one day she might want to give these to one of her children. This way, they can have their own name on the billet, or just have a back strap looped in.
So, long way around the barn, but most of it was my imagination and her measurements. LOL. She did let me know, though, that she added "leather workers" to her very short list of men that a woman will give her actual measurements too. LOL.
-
Good-looking chaps, RT. Good contrast. Nice work.
-
Chaps fit real well. So do the jeans. ;D
-
Got one word to say RT
SWEEEEEEEEEEEEEET !!!!!!!!!!!!!
Cowboy316
-
Howdy RT, Very nice :o 8) ::) ;D
TW :D
-
They need a little emoticon for the blush. Now all I have to do is finish Bruce Camp's belt, and do my wife's batwings (batwing chaps ... no witch jokes, guys) and I'll have two more items off my list.
BTW -- Bruce splurged and got him one of Will Ghormley's OWC white brass buckles. Rectangular rose and wheat shock. And it's a very nice buckle, to say the least.
OK ya'll off to dreamland. I start my new job tomorrow! WOOOT. Wish me luck!
-
RT, Luck your way PARDNER :o ;D :D ;D
TW ;) :D ;D
-
Howdy boys!!
Had ta go out and shake the bushes, but I made er back!!
Johnny D...Great rig...love the colors...looks like ya walked right out of history!
Corkscrew Tom, Howdy...man those seat covers are way to purbutiful ta plop your butt on!! Cool idea!!
Big Bear...nice work...usta make them purses my own self!!!
RT... real nice looking chaps...I'm a thinking I need me some of them!!
Lots of good stuff ta eyeball!!!
Here's a couple more.
BH
-
Looking Good Bad Hombre!
That is a awesome rig!
Thanks for sharing!
ACE
-
Howdy BH, What Ace said goes foe me too, nice work Pard. ::) 8) ;D
TW ;) ;D
-
Bad Hombre, Nice looking holster and sheath. Tri-weave stamping looks good and the way you have the throat of the holster maybe it is called the recurve but anyway that looks old and different. I like it.
Johnny Dingus
-
That's a great holster, BH. I like the way it ties in with your sheath. What's the little doodad on the right of the holster that looks like a sheath for a jalapeno pepper?
-
What's the little doodad on the right of the holster that looks like a sheath for a jalapeno pepper?
Oooo, there's an idea for us chile heads.
Great work, BH!
-
BH, very nice work. I've not seen a design for a knife sheath like that before. Very cool, and the stamp work looks great. Like Marshall, I'm curious about the "pepper" JD
-
Howdy BH,
Beautiful work! Looks like you put a lot thought into making your designs very practical. Please keep em' coming.
-
WOW!! Boys, youse is quick!!
That's zackly was it is...I carry a big ole Jalapeno...one wiff and I'ma shooten twice as fast!!!
Them spotters eyeballs is a watering n they can't see no dang misses. He He He!!!!
Old age and treachery Boys!!!
Thanks for the complemento's
BH
PS It's also handy fer toting a little ole folder called a feather.
-
Thanks, BH. I like it. That's a cool little folder. Nice sheath for it. I don't have one of those, but I do have a jalapeno..... ;D
-
Just finished a practice Holster using a batch of home brewed Walnut dye. The holster was soaking in the dye for five days. Attached is a ninety second slide show that shows the dyeing and finishing process.
http://w278.photobucket.com/pbwidget.swf?pbwurl=http://w278.photobucket.com/albums/kk81/jvsaffran/Walnut%20Dye/1d9e6fa9.pbw
I'm not much of a photographer. I was trying different backgrounds to illustrate the changes in appearance.
On the next one I will experiment with shading and adding highlights.
Special thanks are due to Ten Wolves for the help and encouragement he gave me in learning this process.
-
Hey Pard,
Thats AWESOME!! I love it and the Rossette IS BEAUTIFULL !! I won't be carving everything, it is I want to be decent at it!
But Nice Stamping like that, is as good as carving!! What you did there, is useing your mind, where what I am doing is just copying something someone else drew out! Right now, since David C. gave me a lot of scraps, I might be making knife sheaths all year.
I am trying to get good enough, to make my dad A carved belt, he is 89, and it would put a smile on his face!
Great Job Bud!!
later
ACE
-
Johnny
my friend thats an awesome rig i just love that deep rich brown color i cant wait to get my hands on some walnuts and brew up some of my own but when the walnuts come into season ill have some i hope but all in all great rig wish i had some pistols to make holsters for but oh well
great work
Cowboy316
-
Cowboy 316,
If you can't come up with some, let me know, i sent walnuts al over last fall, and all I ask was shipping> I will look tomorrow, I might have enough strashed that you could make a couple 2 litre of dye! i will let you know tomowwor if you want?
ACE
-
Ace sounds good my friend im sure i can come up with the shipping somehow LOL
Cowboy316
-
;) :D ;D :o 8) Howdy Johnny
I'm real happy you like this walnut dye, your holster came out beautiful, nice rich/deep brown color, your stamping/sewing and design look great too, You make me proud for sure ;) :D
tEN wOLVES ;) :D ;D
-
Hey Johnny, really nice color on the holster, which by the way looks great, with or without color.
Well, I messed around a little today, tried my new (I think it''s called) Tri Stamp. Man, is that thing hard to line up straight. As you can see by the picture, I had a heck of a time figuring out how to get it started. If anyone has any advice on how to use that one, I would sure appreciate it.
I had the holster ready to wet mold when the stroke came visiting, so I did that today. I'm still trying to get a pattern I like for CAS, so this one still has some tweaking coming. I wasn't sure how I wanted the belt attached, so I just sewed a strap on. It's not a method I would recommend, but I was more interested in the shape/size of the holster than anything else. I'm going to dye these black. The sister to this one is done, just now sewing the strap on.
I lined these, for the experience. 3/4 oz veg tan on 8/9 oz leather for the holster. Now I have a new list of ways not to do things, a learning experience.
I don't know if the pictures will attach the way I want them to. It's been a while.
(http://i165.photobucket.com/albums/u51/HarleyPastor/09-04-23/Tristamptrial.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/09-04-23/Blackholstermod1.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/09-04-23/Blackholstermod2.jpg)
-
Cowboy316,
PM me you shipping info, I think i can get you enough for a good batch.
Later ACE
-
Johnny, that is a really nice looking rig you did. Thanks for the slide show its neat to see the whole process.
JD, its really great to hear you are hands on again!!!
-
Very nice holster, Johnny M. I like that rich color and, as already mentioned by Ace, that rosette is really great. I guess I'll have to brew up a batch of black walnut cye this year.
Glad to hear you're at it again, JD. There's nothing better than working with leather to relax and let your body take care of itself.
-
Many thanks to everyone for the kind words. I greatly appreciate your encouragement.
JD, It is really great to see you back at your work bench. I think you did a very neat job with the Tri-Samp. I also like great job you did with border stamping your Holster. That is one of my favorite stamps for borders.
-
JD my friend welcome back to the bench here have my seat LOL
that tri weave is a bugger its trickier than the regular basket but it sure looks cool
ive fought with mine since the day i got it but like they say PRACTICE PRACTICE lol
lookin good tho bud love the holster cant wait ti see it finished
tank care and God bless
Tim
-
Great work. That border is nice!
-
Been gone for awhile we are moving our shooting club the Tejas Caballeros from one ranch to another and it is a bunch O work clearing land and moving targets and stages, but when we get it done it is going to be a fine cowboy shooting place. Sure is some nice leather work being done. Johnny love that coloring very nice looking holster bud. Ace, pardner your carving is coming along really good nice looking knife sheath. JD sorry to hear about your stroke sure am glad to see you're back at the ole work bench, nice looking holster. I have a heck of a time trying to use that particular stamp JD I just put mine away!! I have some leather work close to being finished it has been a huge learning experience I'll share it with ya'll soon.
-
Johnny, nice looking holster with that walnut dye! Looks great!
JD, glad to see your back at it. Those will be some nice holsters when you get them done.
DM
-
Nice work all around, pards.
Well, thought I'd show you a recent project -- yeah, another shoulder rig. Seems like I'm doing a ton of them these days.
Anyway, not that different, but using a different edge stamping pattern. I kinda like it. Small, delicate etc...but curious about your all's take.
Much obliged.
(http://img.villagephotos.com/p/2005-5/1013589/Webversion4697.jpg)
(http://img.villagephotos.com/p/2005-5/1013589/webversion4711detail.jpg)
-
Dave
thats a really cool lookin bored if i may ask where did you get the stamps to come up with that
all in all pretty snazzy rig
Cowboy316
-
Howdy Dave :D
Awesome work Dave, I've always liked you choice of borders, " Very Classy " you must have the market cornered on those border stamps, I've never seen them before, very nice to say the least, and the color is nice and rich like your other holster.
WELL DONE PARD ::) :o 8) ;D
tEN wOLVES ;)
-
Irish Dave beautiful leather work! The construction is very good, the border stamping is precise and unique, the coloring is outstanding. It is obvious you take a lot of care in your work, any cowboy would be proud to own that rig.
Like everything about it !
Wiley
-
Thanks, pards.
The outer edge is a rolled-on embossed line-pattern tool. It's a very old hand tool I bought from an old harness maker/cobbler probably 25-30 years ago and it looked like an antique then.
Middle is just a regular small stamping tool (sorry, don't recall the number off the top of my head, but I'll look next time I get a chance). Main thing is that I used it sideways between two grooves spaced to fit it.
The inner, "funky P" kind of tool is a stamp an engraver friend of mine gave me that is actually intended for metal stamping. He had acquired it somewhere and wasn't using it, so he made me a gift of it.
Truth is, that I'm always on the lookout for interesting items that might make good, period-looking border stamps. Usually come up empty, but once in a while something turns up.
I enjoy all types of Old West holsters, but just keep getting requests for the shoulder rigs. Picked up several orders at the NCOWS Convention last month and am finally just about finished filling them.
Am in the last stages of one for a 5 1/2" Colt for my good friend St. George. I'll be proud to know he's wearing it (if I can ever get it finished).
Maybe I'll get a chance to make something different. Who knows.....
-
Here is my version of a Will Ghormley pattern. This is the shooter's single strap saddlebags. I left off the exterior holsters, thought they would be more versitile without them. I added the double loop Mexican lace. A lot of work, but a bunch of enjoyment also.
-
Those are dandy, Wiley. Definitely 1st Class in my book.
-
Outstanding work,Wiley. Outstanding!!!
-
Nice work all around, pards.
Well, thought I'd show you a recent project -- yeah, another shoulder rig. Seems like I'm doing a ton of them these days.
Anyway, not that different, but using a different edge stamping pattern. I kinda like it. Small, delicate etc...but curious about your all's take.
Much obliged.
(http://img.villagephotos.com/p/2005-5/1013589/Webversion4697.jpg)
(http://img.villagephotos.com/p/2005-5/1013589/webversion4711detail.jpg)
Well Dave, my take on it is,'Real nice a crisp lookin' rig". I like the right and left volutes you used on the border. Very different from anything I have seen in awhile. A bit better than the average bunkhouse stuff. It almost looks perfessional. ;D
Horse Pen
-
Wiley,
Them are awesome bags!! Great carving pard, I like a lot!! Thanks for sharing!
HP,
Nice looking should rig!
later ACE
-
Here is a purse I just finished yesterday. I made it for my wife, gotta keep her happy.
-
Irish Dave, HorsePen Henry, Ace, thanks for the kind remarks much appreciated.
Big Bear, really nice purse cowboy, your wife will enjoy that one for sure.
-
That rig looks really good, Dave. What did you use for the edge outside the stitching? I like that look.
Wow, Wiley. Those saddlebags look first rate. The dark background really makes a good look with the dark lacing.
Very cool purse, BB. Your style of carving has a nice look to it. It reminds me of some of the early Spanish work.
Holey shamoley, pards! I go to a match and get these treats to look at when I come home. What a pleasant way to kick back after a busy day in the Sun. Great work from all of you. Thanks.
-
Irish Dave, that tool doesnt happen to be a roller for pastry edges does it? I have an old pastry tool that makes an edge a lot like that, except its got wider spacing. I have played with it, but the spacing is too wide too look good in my eye. Yours looks great.
Wiley, Nice bags. I have mine cutout, but havent done anything much to them yet. Still trying to decide what I am going to do.
BB, thats a nice looking purse. Gotta keep the ladies happy, yes.
DM
-
Irish Dave, Big Bear, Wiley great looking work pards.
-
Howdy Irish Dave, Wiley & Big Bear,
It is a genuine pleasure to look at such beautiful work! Everything you guys do is top notch and first class!
Thank you for sharing your talents with us.
-
Wily & Big Bear, you pards are Rocken, nice work all around. ::) :o 8)
tEN wOLVES ;) :D ;D
-
I just finished a matching Cartridge Pouch for my new Rig.
Attached is a link to a short slide show that shows how I wet molded the pouch:
http://w278.photobucket.com/pbwidget.swf?pbwurl=http://w278.photobucket.com/albums/kk81/jvsaffran/Wet%20Molded%20Bullet%20Pouch/cb7104a7.pbw
I would like to put another coat of Skidmore's on the entire Rig and then put it into the sun for better pictures. Unfortunately we are in our monsoon season big time here in Wisconsin.
This one was sort of rushed as I was anxious to try out the design. I was concerned about the size but it looks like it will function OK. I'm going to make another pouch using Walnut dye and take my time.
-
That cartridge pouch does look good. I like the way it's molded. It suits the rig nicely. Good work.
-
Howdy Guys
I spend the day at the Cowboy Poetry Festival and see some half-**ed leatherwork and them come back here and see some real nice lookin stuff. Keep it up guys.
WC
-
Howdy Pards ;D
Johnny McCrae
Pard what a neat pouch, and the slide show is great , it will help others to understand the process, and that was very thoughtful of you to do this, the pouch looks fantastic on your new gun belt, very professional, I like the whole rig, and your spot placement is right on, Thanks a bunch for sharing all this with us, you were a big help in helping me when I made my butt cover for my Pedersoli Sharps Rifle, this method really works great, and wasn't nearly as hard as I thought it would be, thanks to you. ;) ;D
Keep them coming Johnny :D 8)
tEN wOLVES ;) :D ;D
-
Pretty sharp looking set up, good job... :)
-
Johnny
great lookin set up ya got there bud love everything bout it
great job keep it up
Cowboy316
-
That rig looks really good, Dave. What did you use for the edge outside the stitching? I like that look
Will: It's an old hand tool I bought from an old harness maker/cobbler probably close to 30 years ago who was going out of business. It rolls that pattern onto the leather similar to the hand-held embossing tools.
Irish Dave, that tool doesnt happen to be a roller for pastry edges does it?
Dalton: I don't think so, even though it's pretty similar. It has a very fine-lined, cone-shaped roller that is no doubt a leather tool of some kind given where it came from.
My best guess is that it was used years ago to put that kind of edge around the upper sole of dress shoes. I seem to recall seeing that style in the days of my youth. ;)
-
Howdy Big Bear,
Wow! That ought to do the job big time!! Gorgeous!
-
Johnny Mac,
You no it isn't nice for you to be turning out all this georgeos looking leather goods, when you know i havn't been feeling good enough to get out and make anything!!!!
Just Kiddan around great stuff pard!! Keep it up!!
Later
ACE
-
Thanks for all the nice comments guys much appreciated.
Johnny that pouch is top notch and so is the rig really nice leather work.
-
Will: It's an old hand tool I bought from an old harness maker/cobbler probably close to 30 years ago who was going out of business. It rolls that pattern onto the leather similar to the hand-held embossing tools.
Thanks. That's a nice look.
-
Here is my stuff
Josh
-
Very nice Josh, love those oak leaves, Welcome to the forum Pard, we'll be looking to see more from you.
Regards
tEN wOLVES ;) :D ;D
-
Jbird
love everything bout that rig the color is great
welcome
Cowboy316
-
Howdy JBird,
As TW said WELCOME!! That is one fine looking rig :o :o You can't bet Oak Leaves, great detail and excellent backgrounding!
I like everyone here like looking at others awsome work!
Can't wait to see some more of your stuff!
Thanks for sharing!
ACE
-
Thanks all I am glad you
Like it see you around pards
Josh
-
Hey JBird, very nice work. Is that your own design? I love Oak Leaves, and you've done a nice job with them. Overall a real nice holster design. Thanks for sharing this picture, and welcome to the forum! JD
-
Hay JD yes it is my own design and thank you pard
see you around
Josh
Hey JBird, very nice work. Is that your own design? I love Oak Leaves, and you've done a nice job with them. Overall a real nice holster design. Thanks for sharing this picture, and welcome to the forum! JD
-
Very nice work, jbird. You got nice 3-d on those leaves. Excellent. Thanks for the pic. Welcome, looking forward to seeing more of your work.
-
Howdy JBird
That's a good lookin rig.
WC
-
Not Cowboy but here is a Shoulder Holster Rig I just finished for a friend's 9mm.
The harness section is removable and this holster can be worn on the belt. The two straps with the buckles on them will pivot giving some extra adjustment. The "over the shoulder strap" can move on the chest belt allowing it to be worn over either shoulder. I might have to make a sheepskin sleeve if the "over the shoulder strap" digs in and is uncomfortable. Any comments and suggestions will be greatly appreciated as I now have to make one for another friend.
This was an enjoyable project to work on.
-
Howdy John
I think you did a DYNAMITE JOB, I like everything about it , your friend should be real happy to wear this rig, you did well in providing difference variances to wearing it, the sheep skin shoulder strap would be a good add on, just like you find on guitar straps.
Well done Pardner
tEN wOLVES ;) ;D
-
Nice job, Johnny. Looking good. That's an interesting design. Your own creation?
-
Howdy Pards,
Many thanks for the kind words!
Dave,
That is my own design I'll admit that I sort of made it up as I went along and I was just lucky it worked.
-
Johnny M, Ya done well. That looks really nice. Good design.
-
Real nice Johnny! I just love the color you get in these holsters. ;D
-
Howdy Johnny,
Man you been kicking out so AWESOME leather!! :o I got brain frezze ::) ::) I am getting ready to start on a Hollywood Rig, I am not for sure what guns I want to make it for!! And I am not good enough to do any carving on it, so I have some of the basic's layed out on art board, I got to get some leather!! It is allways something, I have been working so hard on my carving, I just can't focus onmaking rigs>
Keep up the good work pard!!
Later ACE
-
Johny. that is one cool looking rig. The fact that you designed it makes it all the more cool. I agree with Santee, the color you are getting on these rigs of yours is really nice. Thanks for sharing the pictures, JD
-
Johnnie, that is an outstanding rig. I love the way you made it so versital.
If you could post some more pics showing the back of the holster and how it mounts on the harness I would really appreciate it.
I think I know how you did it but a picture.......etc.
Again, that rig is just the berries. GB
-
Nice Job Johnny like the fact you can use the holster on a belt also.
Johnny Dingus
-
Howdy GB,
Here are some pictures of the back. I'll try to get a picture of my friend wearing it. Hope this helps.
-
Hey Johnny, JD again. I really like the stitching on this rig. You explained to me once how you were stitching, and it wasn't double needle. Are you still using the same technique? What about stitch spacing? How about the type of thread? My stitching still stinks, so I am looking to improve it. Thank you sir, JD
-
Howdy GB,
Here are some pictures of my friend wearing the Shoulder Holster Rig.
Howdy JD,
Yes I am still using the same method. I mark the holes in a stitch groove and then pre-drill them with a 1/16" dia. drill bit using a Dremmel Tool. The spacing I used here is 1/4". Sometimes I use 3/16" spacing. I use Tandy's pre-waxed thread. This method works for me but I still want to learn how to use the traditional method with an awl.
-
Johnny
that rig looks mighty comfy to wear you did a great job on the design
kepp up the great work
Cowboy316
-
Johnnie, I appreciate the extra pics. I am guessing that you used chicago screws to allow for the swivel.
Again, I think that is a super design and would work very nicely with some of the larger caliber handguns.
-
Thanks for the extra pics, Johnny. I was wondering what the back of it looked like.
-
Makign a sneak attack posting. Been very, very, very busy lately, but thought I would post pics of Cari's new batwing chaps.
(http://forums.horsecity.com/uploads/1241041400/gallery_20846_920_43539.jpg)
(http://forums.horsecity.com/uploads/1241041400/gallery_20846_920_27915.jpg)
(http://forums.horsecity.com/uploads/1241041400/gallery_20846_920_34623.jpg)
(http://forums.horsecity.com/uploads/1241041400/gallery_20846_920_5795.jpg)
Hope ya'll like. Now back to work. I have a gunbelt for Bruce Camp half-done and lots of other things working as well. When it got busy, it got biiiizzzzzaaaaaay. Hope to have Bruce's belt done and ready to ship Monday.
Hoka!
-
Fine chaps, RT. Clean and contrasting. Thanks for the pics.
-
By the way. I managed to pick up two Singer 29K treadle foot machines. A 51 and a 60. Also found a manual for them. Considering they were made in 1929 and 1940 respectively, and they're still smooth as glass, I'm pretty happy with that.
I also received in the mail, my FOID card finally. So ... now I needs me a shootin' iron.
So tell me pards ... what do ya'll recommend for a first pistol. I have a limited experience with firearms, and would like something relatively safe, inexpensive, and not to cumbersome on maintenance. You know, a good beginning pistol.
Of course, I really need to just ask the guys at the magazine office I work in now. We got Shootin' Times, Shotgun News, all the SIPs they do (special interest publications - Handguns - AR15, etc.).
Ya'lls thoughts?
-
Get yourself a 5.5" Ruger Vaquero or an Uberti clone. Thats my suggestion for a first one. The Ruger is built to last forever, and is easy to work on. The Uberti will probably need worked on to make it as nice as the Ruger.
DM (Nice chaps, btw)
-
I agree wth Dalton, a Ruger Vaquero 5.5 inches, blue or stainless can't be beat for a first handgun, or only handgun. They're like Timex watches, they take a licken, and keep on ticken. Nice chaps, real professional lookin, and sharp.
-
RT
first of all very sweet lookin pair of bat wings love the color combo the light really makes the yokes and belt pop
and all im gonna say bout the sewing machines is STOP THEIF marshal he went that way >>>>>>>>>
great job and keep up the wonderfull work
Tim
-
::) Very Nice RT, pretty Gal too :D
TW ;) :D ;D
-
Howdy RT,
Since I don't know FOID card is, I realy can't tell you what to buy?? If you want a Coxboy Gun,I do't think you cab beat the Uberti Homries, if you can stand the Matte finish! And if cash is low, you can do a tooth paste action job that will make it a lot nicer!
If you are looking for a conceal weapon, If you want a auto, I would go with the Kel Tec 9mm model P 11, safest Auto to pack with one in the pipe! If you want a well Gun Get a Judge.
I can't add anything else, and you did say you were on a budget!
ACE
-
Howdy RT,
Thats a great looking pair of Chaps! Very nice design and workmanship! Real professional looking.
-
Here is a rig I just finished for a fellow shooter. The belt will adjust from 38" to 50".
-
RT, good looking chaps you did a nice job on them.
Johnnie Mac, you keep it up and you are gonna lose your amatuer statis Pard. Great looking rig and i really like the loops being at the bottom of the holster. Gives it a very different look.
-
Johnny
love the work your doing there pard the star conchos add just enough bling to make the whole rig appealing to a cowboy like me but then again i like just about anything the guys here are making LOL
keep up the great work pard
Cowboy316
-
I agree Johnny! Those are some sharp pieces of leather you put together there!
-
Thanks for the advice, gents. I'll dig into the Vaquero and the Uberti and see if I can put a few pennies away here and there.
Oh, and Ace -- FOID=Firearm Owner Identification card. You have to have one to own one. LOL.
-
Howdy John
Beautiful Pard, you're putting out some professional looking leather these days, it seems every few weeks you take it to another level, I can tell you are really enjoying what you are doing Pal, you can see it in your work, Keep it up Pard. :o 8) ;D
tEN wOLVES ;) ;D
-
Many thanks for the kind words Pards. I'm sure that I would not be involved in Leather Working if it were not for this Forum and the wonderful people associated with it. The encouragement and inspiration I receive here on CAS City is greatly appreciated. The tips and advice a person gets here are priceless! I also want to say that it is always genuine pleasure to view the beautiful work posted here by everyone.
-
That's a good-looking rig, Johnny. The two-tone conchos are a nice accent on the dark finish. Nice work.
-
Hi Johnny, I love the new rig. The color is great, and I really like the design-cut of the holster, That's what I've been trying to accomplish, but haven't got there yet. How are you able to make such a wide adjustment on your belt? 12 inches is a lot. It looks pretty normal to me. Thanks, JD
-
Howdy JM
Good lookin rig.
WC
-
Howdy Johnny M,
That is real Purdy!! Man I have to get something made, you guys are killing me! :) :)
Not!! I love it, the more I see, the more I want to be out there doing it!!
Later, and thanks for sharing!
ACE
-
Howdy Johnny McCrae.
That's a great looking rig...love the color!!
Look of the old west!!!
Clip corner belt for a clip corner buckle...cool!!!
Nice work pard!!
BH
-
Here's the finals for Bruce Camp's belt. Hope ya'll like it.
And yes, Bruce sprung for a Ghormley buckle, and that buckle was well worth it! Made the whole belt look sharp!
(http://forums.horsecity.com/uploads/1241378016/gallery_20846_932_11304.jpg)
It has three crosses, for a Spanish/Catholic motif.
(http://forums.horsecity.com/uploads/1241378016/gallery_20846_932_31960.jpg)
(http://forums.horsecity.com/uploads/1241378016/gallery_20846_932_21330.jpg)
I have to finish polishing it still, but for most intents and purposes, it's done.
(http://forums.horsecity.com/uploads/1241378016/gallery_20846_932_2037.jpg)
Hoka!
-
Simply gorgeous! ;D ;D
-
::) :o 8) ;D Nice work as always RT, Thanks for the look see ::)
tEN wOLVES ;) :D ;D
-
Howdy RT,
Outstanding! The buckle really sets off your great workmanship. Thanks for sharing
-
Howdy RT.,
That is a very nice belt!! I like the spots and how you placed them!! You are also correct on the Buckle, WG. buckles are awesome, and they make anything look better, it is a complement to your work!
Thanks for sharing!!
ACE
-
Very striking, RT. The spots pull the buckle color all the way around the belt. Nice job.
-
Very striking, RT. The spots pull the buckle color all the way around the belt. Nice job.
+1 :D
-
That buckle looks great on a black belt! Good job.
-
Nice job, RT. Looks good.
-
Howdy Pards,
Well, another "pancake". This is the latest for a 3" brl. Bulldog .44. Olive oil finish with bag cote, then acrylic resolene top coat. I recently purchased a set of Master oblong punches from Weaver. A little pricy but they sure do make one neat and even belt slot. They sure make a neater slot than I could do by hand.
-
Very nice Outrider, that punch does a good job and a neat one too, but the holster looks good and I can tell it fits well also, I never owned one of these Charter Arms Bull Dogs, but I hear they are a pretty good revolver.
tEN wOLVES ;) :D ;D
-
Nice and clean, Outrider. Sometimes less is more. I like it. Thanks for the pics.
-
Howdy Outrider
Very Very nice.
WC
-
I agree Outrider! Bravo!
-
Tw,
I have not owned a bulldog either, but it seems to be well built. Unfortunately, this was the weapon of choice for that nut case in NY....Son-Of-Sam.
-
Howdy Outrider,
That is a very nice design coupled with your usual excellent workmanship! The slot punch does a great job. Thank you for sharing.
-
Very nice Outrider!!
I have yet to make a "successful" pancake. One of these days I will sit down and do a few.
DM
-
Dalton,
Thanks for the compliments
One thing I have found is to make the front portion of the pancake about 1/4" longer than the back section. This will give you a little pre-forming to the bocy curvature. The other thing to watch is slot alignment. I used to do the front slot first then the rear slot after I put the two pieces together. With these new slot punches being so uniform I now do both and then align as I am putting the two sections together. It seems to work out better for me. Another nice thing about pancakes is that you can do a basic design and then retro fit to many different guns by re-aligning the stitch lines.
-
Thanks for the tips Outrider! I started one for my Vaquero a year or two ago, and it got deep sixed quickly.
WIll have to try one for my 1911.
DM
-
Outrider, that is a very clean looking rig and thanks for the tips on putting one together.
-
Howdy Outrider, :)
That is a very clean neatly done pancake holster! I beleive, I have enough on my plate at this time, and maybe someday I will try my luck at it!
Thanks for sharing!
ACE
-
Dalton,
This is the one I was thinking of.
-
OOOOOOH! :o I like the looks of that!
Thanks, Outrider!
DM
-
Outrider, what a great looking holster for that auto. The basket stamping is great.
Dalton, thanks again for steering me to this forum last year, it sure has been a blessing. JD
-
Its been great having you here, JD! Glad you enjoy it.
DM
-
That black basketweave does look good, Outrider. The retainer is a good design to keep the hammer from falling when you don't want it to. Will that holster also allow it to be holstered with the hammer down as well?
-
Very nice Outrider, makes me want to run out and get a 1911, I think you have these pan cakes down to a science, Well Done Pal. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
Correct me if I'm wrong, but that 1911 is at full safety when it's cocked like that, isn't it?
-
The 1911 has two safties. one is in the grip frame and the other is a mechanical that loaks the hammer and the slide. That holster is designed to carry in the "cocked and locked" position. The strap going between the hammer and the firing pin is actually a third safety..
You can also use this design to carry with the hammer down on an empty chamber.
JD...how ya feeling there pardner? Hope all is getting back on track. Thanks for the compliments on the pancakes...actually I started making them 30 years ago....before I did western style holsters. Once I made a pancake for a friend who had a S&W Model 459 9mm with a trigger guard mounted laser sight...kind of bulky but it sure worked.
-
ok guys heres a little holster i whipped up today for a small semi auto i just pullt it off a picture i had not sure what exactly it will fit but its a cute little thing made to match my belt and knife sheath LOL
enjoy guys
Cowboy316
-
Thanks for the information, Outrider. that's a nice design.
Cowboy, that one looks really nice. It's a good match for the sheath.
-
Hody CB316,
That is a realy nice looking pancake holster!
Keep up the good work fellows!
ACE
-
Howdy Gents :D
Just finished the Slim Jim cross draw holster to go along with the Mexican one loop I made earlier, I dyed it the same as the other , in Cowboy Coffee ( cold of course) and adorned it with brass and nickel spots and a silver concho, and finished the same as the other, this is truely one comfortable rig to wear, I can't say enough for the comfort that you get from a money/gun belt.
Hope you pards like it
Regards
tEN wOLVES ;) :D ;D
-
More pictures
TW ;D
-
Boy that sure makes a beautiful rig, TW. Did you put any iron in the coffee to darken it? I didn't have that great success with mine. In fact, after 24 hours, the leather had hardly taken any of it at all. This color is outstanding. It's particularly suitable to this rig with the shiny accents. Good work. Thanks.
-
Boy that sure makes a beautiful rig, TW. Did you put any iron in the coffee to darken it? I didn't have that great success with mine. In fact, after 24 hours, the leather had hardly taken any of it at all. This color is outstanding. It's particularly suitable to this rig with the shiny accents. Good work. Thanks.
Howdy Will
Thanks for the compliments, and yes I added IRON to to the Coffee, in fact I add IRON to my Coffee/Walnut/Pecan, and of course there is the Vinegaroon which is Cider Vinegar and Iron, I found just like you , that I wasn't getting much color by just using coffee or walnuts/pecans without adding some iron, by adding Iron I was able to get the deeper colors I was after in all my natural dyes, Thanks for asking, this might help others that are looking for more color in there natural dyes, just a note, this Slim Jim was in the Coffee for 20 hours this time, which was 4 hours less than the other, but it's been hotter this time so I thought a little less time would be OK, and it was.
tEN wOLVES :D ;D
-
WOW!!! Ten Wolves great rig.
Love that color...thanks for the tips!!
The money-belt sure is comfortable...love mine!!
Soft, distributes the weight, after awhile you forget your wearing it.
Again Great looking rig!!
BH
-
TW,
You sly old dog you...what a great looking rig that is...I am sincerely jealous.. ;D
-
C316 - that's a sweet bit of work on that Pancake!
TW - Well, if you can't drink the coffee, you may as well make something perdy out of it, and you sho-nuff have!
Bravo!
-
Hey Pard,
AWESOME :o :o 8)
TW that is smokin bud!! realy looks good, and the spots realy set it off!!! I knew the next peice you made would be HOT!!
Thanks for sharing!
ACE
-
Howdy Pards
BH, Outrider,RT, and Ace
Thanks for the compliments, it's always very much appreciated, I guess you could say I really like my coffee ( LOL )
Thanks Guys
tEN wOLVES ;) :D ;D
-
Dang 10W, those look darn darn darn nice! Get some dirt on them, and they will look downright old!
Good job! DM
-
OK, thanks for the information, TW. I'll try it again with some iron in it this time. How much did you put in? Proportionate to what you would do for vinegaroon.
-
Will, Ace sent me some, and it is all ground up, I'd say 2 or 3 table spoons of iron, that should do it, and leave the grounds and iron in it when done, which makes it real easy, just put it in a container like Johnny McCrae showed you in his Video, after you use it for a few days , add 1/4 cup alcohol to every QT., When your done dyeing , wash your leather off in fresh water.
I made a large pot, maybe 7 or 8 qt. of water to a I# can of dark roast coffee, put it this way enough water to fill the container about 3/4 up, I use containers big enough so that I can submerge my pieces.
Thanks Dalton, for the kind words Pard :D
tEN wOLVES ;) :D ;D
-
Thanks, TW.
-
Ten Wolves, these are as sharp as holsters & belts come. Very nice work, thanks you for sharing the pictures and the coloring issues. Can I ask what the weight of the leather was that you made the belt with? Once again, very nice, very inspiring work, as always! JD
-
Hello JD, it's good to see you back with us. :D
For the money/gun belt I used 4/5 ounce Veg-Tan, and Thanks for the kind words Pal, I know it won't be long before we will be seeing your stuff again, hang in there Pard, you're doing great.
Regards
tEN wOLVES ;) :D ;D
-
Thanks 10 Wolves. I did a dumb thing today, I rode my Harley to church! I got a real wake up call on how much strenght I've lost. It's only a short distance, but I had a friend ride it home for me. I didn't want to take a chance of dumping it. Otherwise the day went well. I'm back speaking, but not singing or playing guitar. I try to remind myself, it's only been 5 weeks.
Thanks for the come back on the leather weight. I want to try making a money belt soon. JD
-
Thanks 10 Wolves. I did a dumb thing today, I rode my Harley to church! I got a real wake up call on how much strenght I've lost. It's only a short distance, but I had a friend ride it home for me. I didn't want to take a chance of dumping it. Otherwise the day went well. I'm back speaking, but not singing or playing guitar. I try to remind myself, it's only been 5 weeks.
Thanks for the come back on the leather weight. I want to try making a money belt soon. JD
Glad you're OK Pard, you're just going to have to back off a little bit, and give your body time to recoup, there's no hurry to do anything for you right now, again I'm glad you're OK, it will take time to get your strength back so take it easy JD and don't push it too hard,
Wishing you well
tEN wOLVES ;) :D ;D
-
Howdy Ten Wolves,
Your new Cross Draw Holster is simply outstanding. Great use of spots and stamping. Best of all, this Holster does look like one found on the pages of "Packing Iron". This is the look that I'm always trying to achieve. Many thanks for sharing your work and dyeing methods with us.
-
Howdy Johnny :D
Good to hear from you, and thanks for the kind words, the natural dyes have really consumed me, I'm really having fun fooling around with them and coming up with new and different colors, I'm glad you like the holster, the cross draw holster is an add on to the this holster, the one one I copied the other from that I saw in Texas, was just the wide skirt Mexican one loop, and adorned the way I did it at least as close as I can recollect , and didn't have a second holster, so I thought a cross draw Slim Jim would look good on it, and it seems to work OK, at least if need the second gun I'll be ready.
Thanks for taking a look see ::)
Regards
tEN wOLVES :D
-
TW
Dang Son, you make me proud.........
WC
-
TC,
Sometimes ya have to watch that ole TW...he tends to sneak up on ya every so often... ::) ;D
-
Howdy WC & Outrider
WC, your the cause of all this, and Thanks.
Outrider I guess I get that there sneaken stuff from the Wolf don't ya know LOL
Thanks Pards ;D
tEN wOLVES ;) :D ;D
-
JD,
Take your time on the recoup....you have lot's of time too ride the iron horse. Take it slow my friend.
-
Well Outrider, I'm finding that I don't have any other speed than slow at this point. The better I feel the more frustrating it gets. I can really identify with Ace, there's stuff I want and need to do that I just don't have the ump for. I'm closing in on six weeks, so I am hoping the energy returms soon. I tried shooting my shotgun Saturday, and found it's real hard to keep it up with the right arm to reload. Shooting it is fine, as long as I don't have to reload. Guess I need to shoot Western 3 Gun, and stuff the shotgun! I tried cutting out some leather, but it didn't go too good. I can practice stamping though, thank God.
Thanks for the encouragement. JD
-
hey guy me again with another knife sheath this one is done with an antique mahagany 2 coats hope you enjoy
Cowboy316
-
Howdy JD,
It's good to see you back on your Harley but as Outrider says "Take it slow". You are making great progress. Your strength and stamina will be back before you know it.
Howdy Cowboy 316,
Wow! Another beautiful sheath from your workshop. I love the 3-D effect you get with your tooling. Thanks for sharing.
-
Howdy CB316,
Now that is super sharp! I realy like that! I cannot even get out to do anything! This weather is KILLING ME! My bother in law picked me up a couple knifes for me to make sheaths and to practice my carving!
Sorry CB, that is very nice, If I was that good, i might make some money, but it takes practice!
Thanks for sharing that awesome knife sheath!
ACE
-
Very nice work on the sheath buddy! Bravo! You're gettin' them pancakes downer than doughnuts!
-
Take it easy still, JD. You don't want to lie around waiting for someone to pick the thing off you in a parking lot or anything. You'll be back on it soon enough. That doesn't mean you cn't go out and wax it, though. ;D
This is your best one yet, Cowboy. Looks good.
-
Howdy Pards,
One of my pards ordered a 1942 Tanker Holster from me and after many hours of studying photographs and finally finding an old beat up original in a antique shop (cost me $35.00) I was able to duplicate the holster. This one is the first prototype and is in black without the "US" stamp on it (as per customer request). I have finally located a supplier for the original style "Lift-A-Dot" type snaps which were used on the originals and will be ordering a supply of the snaps and the special punch that you need to get the hole pattern correct. I plan on doing variants to be used with the SAA and double action revolvers as well as the trusty ole 1911
-
Howdy Outrider,
Beautiful work! It has to be very satisfying to be able to duplicate an old Holster like that. Many thanks for sharing your talents with us.
-
Great job, Outrider!
-
Howdy Outrider,
Pard that is a good looking 1911 holster!! So Neatly designed and sew, they don't get no better than that!
Great Job and thank you so much for sharing!
ACE
-
That's darn nice, Outrider. You have a picture of the back? I really like that one. Very good job of making it look correct.
-
Outrider
Great job.
WC
-
Looking good Outrider, nice work Pard
tEN wOLVES ;) :D ;D
-
Hey outrider that is just like all the tankers I've seen, except I'm sure the workmanship and material are much better. I use the lift the dot snaps myself but never knew there was a special tool for it, if you don't mind could you let me know where I can get one.
Thanks
Robert
-
Outrider that is a very nicely done rig. You must have one heck of an antique store close to you. How do you keep finding originals to work from. Besides having some serious talent you are also the luckiest guy around ;D
-
Looks Good Outrider. Nice clean lines and sewing. Would look good in brown also.
Johnny Dingus
-
Marshal,
Here is a picture of the back of the Tanker Holster.
Johnny D...most of the originals I have seen were all in a brown or oil color. This customer wanted it black. Thanks for the compliments guys.
Gun Butcher...we have alot of antique stores around this area. In fact I was in an antique store today and found another antique stitching horse bench...wanted $175.00 for it ... but I passed it up since I just got one at the beginning of the year on my trip to Iowa. Maybe I should go back and get this one as well just for the heck of it
-
Outrider, i won't put a jinxs on ya by telling you to go buy that horse. The way my lucks been running lately I could lose money on gold. But, I still think yer luck is something else and your leatherwork is getting better in leaps and bounds.
-
Thanks for the back view, Outrider. It's nice to see how it was done. Many thanks.
-
My dad served in WWII, and went alll over Europe in a tank. I have a picture of him in uniform, taken by a pro, wearing a holster a just like that. He's with the Lord now, left us in 2005. Great job! Thanks for sharing your work with us. JD
-
Thats a good looking shoulder rig, Outrider! I got your envelope saturday. Thank you very much.
Heres my latest completed project. Its a holster made for a Sig Mosquito .22.
Cute little pistol, but its fat and blocky. Not near as sleek as an old Colt. Anyway, not mine to gripe about. :-\
The finish is EVO, 30 minutes in my coffee dye, EVO, sunshine, EVO, and Skidmores.
Heres some pics.
The last photo shows how much difference these fat little pistols make to a basic pattern. Makes it look like a guppy.
DM
-
Very nice, Dalton. I like that wild rose pattern a lot. The color is good and the workmanship is top notch.
-
Well Guys ive been away for too long, there is some great gear been posted over the last few months,
here is a couple of holsters that ive done recent, Don
-
Howdy Gents
Dalton these holsters are beautiful Pard, nice patterns, your tooling gets better and better every time you show new pieces, and the fit of these guns is right on, Well done.
TW ;) :D ;D
Don, good to have you back with us, your latest looks great, thanks for sharing
TW ;) :D ;D
-
Howdy Dalton & Don101,
Ten Wolves expressed my sentiments exactly. Beautiful work Pards! Many thanks for sharing this with us.
-
Dalton,
I like thiose holsters...well done my friend. Have fun with the pattern.
Don,
It's really good to have you back with us...excellent workmanship...as always...how are things in the Lunerburger Hieda????
-
Holy Cow, :o
I turn my computer off early last eve, and here are all the goodies show up :o :o Dalton & Don, super nice rigs!!
Dalton your Carving is super!!!
Thanks Pards for sharing that awesome leather work!!
ACE
-
Good to see you, Don. Those are beautiful. I like the clean lines on both. They really look historically correct. Very tastefully done.
-
hey guys was gonna make a left hand holster to match the one i did earlier got it all cut out and the border cut and beveled and then relized id cut another right hand one LOL go figure so i thought bout what i could do and this is what i came up with
and btw i did get a left one cut and stamped to match the first one and bout ready to stitch it and then gonna make a matching belt of some kind so if you guys could help me out with a belt pattern id be great full
Enjoy and thanks for all the encouragement
Cowboy316
-
Howdy C316
Very nice Pard, this is a AS pattern isn't it, I like what you did with your design, and those beader lines really stand out and look perfect, breaking up the basket weave adds a little SHANAZE to it, WELL DONE C316, I can see it won't be long before you are packing some iron in them, making a belt will be no problem for one with your talent.
Regards
tEN wOLVES ;D
-
Wow, so much cool work to look at! All the work shown really looks great.
Dalton, I don't even know what to say (a rare thing for a preacher!) Everything about those auto holsters is great. The color and carving really stand out to me as impressive.
Don, that bottom picture set up is really sharp. The curves on that top holster are so clean, downright amazing.
Cowboy, I've made very few holsters, but managed to do the same thing; meant to cut out a left, cut two rights. No regrets, 'cause I sure need the practice. That tri-weave stamp work (I think that's what it's called) is first rate. What little bit I've worked with that stamp let me know real quick I have a long ways to go. Your stitching is sure looking good. I remember you sharing the first holster you were working on just a short time ago. Man oh man have you made progress.
Well, I guess I did have a few things to say after al (Big surprise with my mouth!)
Thanks for sharing guys, I sure do appreciate admiring all your work. JDl
-
Nice, Don. Is that a Tranter in the slim jim?
-
Nice, Don. Is that a Tranter in the slim jim?
Skeeter it is an Adams, Don
-
Howdy
Dalton, Don & Cowboy316
Great work by all of you.
WC
-
Wow,
You guys sure make hay when the sun is shining. Nice work all of you.
Don that canteen, could you let me know where you got it?
Johnny Dingus
-
Dalton,
It's sure a guppy compared to the other two! ;) ;D
Don,
Glad you made it back. I looked at the Slim Jim and said, "Looks like an Adams grip." Boy was I tickled when I saw the caption under the picture. Good looking Cavalry holster too!
C316,
Looking real good there. A very striking pattern! ;D
Thanks y'all!!
Johnny D.,
Chenck out Fall Creek Sutlery at the link below. They are great to work with!
http://fcsutler.com/fctin.asp
-
Wow,
You guys sure make hay when the sun is shining. Nice work all of you.
Don that canteen, could you let me know where you got it?
Johnny Dingus
Johnny it was made by a reenactor over here in Germany hes in his 70s now so im nut sure if he still makes them, Don
-
Nice, Don. Is that a Tranter in the slim jim?
Okay. I'm dumb. I didn't see the caption. :'(
-
I guess the Vicodin has me a little fuzzy, forgot to add the pix.
WC
Howdy All
Went to the San Berdo Fair Sunday with the Leathercraft Guild to do demos all day. Great time.
My Walker rig got an Honorable Mention.
WC
-
Nice work, Cowboy. That's another good one.
Congrats, WC. Nice to get your work recognized. Great pic. Looks like you all had a fine time. I assume when anyone hauls out a maker's stamp, they warn the others at the table? ;)
-
That's good news WC, Congratulations, I guess the judges weren't into guns or holsters, they shouldn't be allowed to judge.... :'( :-\ :-X :-[ :P ??? :( >:(
TW ;) :D ;D
-
Congratulations WC,
There must of been something that blows me away, or the judging was into holsters! I have never seen anything that you have done that could be beat!! I, don't mean to be disrespect full to all the other great carvers and hoster makers that are on this forum!
ACE
-
Howdy Cowboy 316,
Beautiful work! Great design and workmanship. Neat job of stitching.
Howdy Cowboy WC,
Congratulations on your award! I sure wish I could have been there
-
WC, I agree with Ace. If you got an Honorable mention, what the heck was there that took first place? From my experience, you never know what you're going to find a a State or County fair. I don't want to dis someone else's work, but your work is just so good, we want to stick up for you!
-
I assume when anyone hauls out a maker's stamp, they warn the others at the table? ;)
Nice one, Marshal.
-
Howdy All
Thank you for the kind words.
The best we all could figure was that the judges liked laced items not sewn.
Some day the judges will get educated on leathercraft.
WC
-
Howdy Boys
Well WC, I can tell ya that lace work in a dang sight easier than the border/carving work you do!!
Your work is special!! That rig is beau-tee-ful.
Speakin of...I don't usually do somethin twice (can't remember that long)
Made a pard a sheath...like it, so I made my ownself one.
Made it so the knife gos in reversible...so it can be on left or right side.
Now I can have a bigger knife on my rig when I feelin red...ish!!
BH
-
hey there pards me again with 2 new holsters for ya to drool on LOL
the first one is for a .45 colt semi auto and the next one is another .38 colt
enjoy guys and thanks for all the help and encouragment
Cowboy316
PS these patterns are out of the Al Stohlman How to make holsters Book LOL
-
Howdy Gents ;D
BH, you really did a great job on this sheath Pard, and your gun rig looks great too, lacing always adds a nice touch the things.
TW ;) :D ;D
C316, your holsters came out Awesome, your tolling looks professional, welcome to the world of holster and gun belt? making. ;) :D ;D
TW ;) :D ;D
-
Hody BH,
Awesome leather work, get leather work!!
Cowboy316,
Man you got that 3D carving effect down to a T!
Thanks for sharing!
Later ACE
-
Howdy BH
Thank you for the kind words.
Good lookin sheath.
Cowboy316
Nice lookin holsters. Keep up the good work.
WC
-
Bad, that is one sharp rig, I love the color.
C316, man you need to slow down ,you are now gittin better by the minute. You could take a few years off and let the rest of us catch up ;) ;D
-
GB
i did take bout 10 years off cuz i didnt think i was doing very good and needed to make my wife a xmas present so i did here a purse and then i started doing it again and here i am LOL
Cowboy316
-
Very good work, both of you!
Love the style of that sheath.
Nice carving, cowboy!
DM
-
Very nice work, BH. I like making the one reversable. That's a good idea. The rig has a good look to it. Nice stuff.
Cowboy, you're getting the carving down nicely. I see you're getting into some multiple colors. You can have a lot of fun with that. That lower one is really good tooling.
-
316 - that's classic floral carving. Nice.
-
BH & CB 316, I sure do appreciate you sharing the work you are doing. It makes me want to make some holsters myself. Right now I really need the motivation to push past some of the hinderances and get working again
BH, the rig you've got there is very cool looking. Definitely not what you normally see on the range. I would imagine if you wore that to any CAS match, you'd have people asking you about making them a rig.
CB your carving & coloring skills have jumped way off the chart. The stitching is very nice. Are you doing two needle stitching?
Thanks guys, JD
-
Thanks for the words boys!!
CB 316...fine looking holsters, love the colors...how did you get that yellowish color?
JD, most all my personal rigs are abby-normal...never much liked being the "same"!!
Problem is, at shoots no one notices what I wear because of "her"!!
Yep the wife had a bad problem with her back and hip...two stages and she was hurting bad!
What to do??? We always shoot together and that's the way it is!!!!!
Eyeballing through her Cowgirlly books, I spided " the Bronc-Buster belt".... Aha!!
I actually said that...Aha!! So I turned one into "the Bronc-Buster B-Western special".
No more back-hip pain, no more having to leave her pistols in the cart, no more gimping around!!!!!!!!!
YeHa!! When she's Happy, I'm Happy..ya know what I mean!!
Life is good!!!!But no one notices what I wear!!!
BH
-
That's a fascinating rig, BH. What a good idea to use the belt for a solution. Very good idea. Thanks for sharing.
-
thanks pard for the kind word if it wasnt for you guys i wouldnt be doing as much as i am just for the simple fact that i love what everyone is doing here and the fact thati can show it off so people who are greatful of decent work
JD my friend hows it going doing ok here and as for your question bout my stitching i only use one needle cuz its just easier for me i stitch down one way then turn around and go back the same way using one thread
BH thanks for the kinda words your work is an encouragment to me to do differnt things also and as for the yellowish color ont the .45 semi auto holster all it is is Feibings Buckskin dye and thats it
thanks again guys for the encouragment
Cowboy316
-
CB316,
I am sorry I couldn't come up with enough walnuts to send to you! I thought I had some stashed back, but I must of realy stashed them, i can't find them ::) ??? ::) If I come acrossed them I will get a hold of you! I now that someone close by is a good carver, I just havn't found that person! I would realy like to take some lessons when I get a new Doctor and get back on some pain meds!
keep up the good work!!
ACE
-
Howdy BH,
Beautiful job on your Holster rig! Great color! That looks like a very well thought and practical design. Your wife's Belt is also very well thought out and practical. It reminds me of the Kidney Belts that the Harley Riders wore during the forties and fifties. Many thanks for sharing these innovative designs with us. Attached is a link showing some Kidney Belts at the Harley Museum.
http://i278.photobucket.com/albums/kk81/jvsaffran/HD%20Museum/100_0574.jpg
Howdy CB316,
Beautiful job on your Holsters! These are great examples of Carving and coloring. Many thanks for sharing this with us. Keep em' coming.
-
Great work, y'all. What is the purpose of a kidney belt? Back support?
-
Howdy Santee,
Prior to 1958 Harley's had no suspension at the rear wheel, just springs supporting the seat. Kidney Belts did give the rider some back support. On this particular motorcycle there is a spring in the frame. http://i278.photobucket.com/albums/kk81/jvsaffran/HD%20Museum/100_0525.jpg">
-
Howdy Johnny,
I lowered my 78 FLH with the shortest shocks, and then made heavy steal mount going back 3", realy got it low, but only had a 1 1/2" shock travel, it was ruff!
Later Bud!
ACE
-
Howdy Boys...Thanks for the kind words!!
Johnny, the Ladies Rodeo 1900 thru the Great Depression is were the photo, I used to make that belt, came from.
For the same reason the Harley riders wore them!
To protect their internal organs.
Weight lifters too.
The belt provides great back support and the weight distribution, removes any weight pressure on the hips.
Cinched up tight, it actually buts pressure on the lower back.
It works!!!
BH
-
I posted pictures of this rig while it was in the stamping stage and then I was out of town for a while. But, anyway here is the finished product.
Pattern is based on the holster shown on pg. 87 of Packin' Iron.
The stamp is one I made myself. I haven't got the hang of taking pictures like some of you do but here they are for (hopefully)your enjoyment. Gun Butcher ???
-
Looks good, GB. You really captured the essence of that holster. Good work. I like the stamping at the angle you did it, too.
-
Wow GB,
That is some beautiful work you have posted. Nifty design on the Holsters. Many thanks for sharing this with us
-
Howdy Santee,
Prior to 1958 Harley's had no suspension at the rear wheel, just springs supporting the seat. Kidney Belts did give the rider some back support. On this particular motorcycle there is a spring in the frame. http://i278.photobucket.com/albums/kk81/jvsaffran/HD%20Museum/100_0525.jpg">
My dad had a "kidney belt" in the late '20s up until WWII for anything done on a horse and used it when he was a lumberjack. It's made of saddle weight rough-out bull hide and has three belts/buckles to close it. I wish I knew what had become of it. It would just about fit around my thigh (Dad wasn't a very large man), but I'd like to have it anyhow.
-
That's a great looking rig GB !!!!!!
That billet hiding back there is cool !!!!
Great design, great stamping, Dang good picture too!!
BH
-
Howdy GB,
One word AWESOME :o :o I realy like that rig!! Nice lines on it!! keep it!!
And thanks for Sharing
ACE
-
Thanks to all for your kind comments ,now I have 4 rigs for one set of guns. I think I need some new Ideas or it's back to the rifle building for me.
-
CB 316, I'm doing real well. I got back to leading worship this week, with guitar, as well as preaching. It plum wore me out, but it felt good.
GB Very nice work. The solution is obvious, more guns! Oh well, there's the expense and all that.
BH, very nice rig for your wife., I hadn't thought of a built in back support. Kidney belts were standard equipment for riding dirt, at least in the 60's and 70's when I rode. We didn't have as much suspension as they do now. I have a back rest on my Harley, or I'd never ride, 'cause my back wouldn't take it.
I use a Gold's Gym leather weight lifting belt at the range between stages when my back is acting up, so now, thanks to BH, I have a new possibility.
I haven't noticed Horse Pen doing any posting lately. Anyone know how he's doing?
Thanks for sharing, JD
-
How do BH ;D
What a good idea for some one with a bad back, and smart of you to do it , I think we have all had back problems in our years, and know how painful it can be, for a lot of folks it's something they have to go through 24/7, and that can be rough, I know your wife must really appreciate the support this belt must give her.
Regards
tEN wOLVES ;) :D ;D
-
LOL, Padre!
I used to own a '69 Triumph 600 chopper. Hardtail rear, 42" spring front. 8.5' long. John Deere Construction Yellow.
Ex-wife made me sell it.
Should have traded her in on a new model right then and there.
Anywho -- most of ya'll have seen this one, but I thought I would put it on here for posterity.
(http://forums.horsecity.com/uploads/1242757693/gallery_20846_970_37191.jpg)
(http://forums.horsecity.com/uploads/1242757693/gallery_20846_970_73850.jpg)
(http://forums.horsecity.com/uploads/1242757693/gallery_20846_970_124608.jpg)
I got really lucky because the fat rolls on the cow were in this area, as was a big scrape (seen half-way down the barrel). I didn't mind the scrape, honestly, it's just a knockabout rig I did in a few hours. But the color and how it made the fat rolls turn out, well, I sorta like that look. Just kinda different.
Hoka ya'll!
-
The finish on that one is really nice, RT. It's a good holster. I made one recently that had a blemish across the middle but it was a knock-around holster, too, so I can identify with that. Thanks for the pics.
-
Heck, thats just character oozing out of it! Love it as it is!
DM
-
Howdy,
Nice work from everyone! I figured I'd get some of my latest up since I'm back to my tools now.
Hope ya like 'em. ;D
My new RV rig started:
(http://i176.photobucket.com/albums/w169/canelokid/CK%20Leather/RugerNMV-751.jpg)
My new Wild Bunch holster:
(http://i176.photobucket.com/albums/w169/canelokid/CK%20Leather/CKid-WB45Holster.jpg)
I guess I'd better go back and read how to insert images a tad smaller. Sorry. :o :-\
Safe trails,
CKid
-
Nice work, pard. I like your basketweave. It does well on those. That's a fine Wild Bunch rig, too. Thanks for the pics. Welcome to the forum. Looking forward to seeing more of your stuff.
-
Howdy
Those are good lookin holsters.
WC
-
I agree. Really nicely done. Like the Wild Bunch too1 :D
-
Howdy Kid,
Beautiful work! Very neat and professional looking!. Thanks for sharing this with us.
-
Welcome CK, :)
Glad to have you with us! Nice looking rigs!! No doubt you are not a rookie to leather work, because those are very nice holsters! Like MW. said, I like the basketweave stamp, I think I have one close to it, mine is a Midas and i have 2 sizes. I am very glad that you have shared with us, you won't ever find a better bunch of Pards than there is on this forum! I call these pards my family, they have all been so help full and the friendship you can make on here, is AWESOME!
Glad to have you aboard!
ACE
-
Thanks for the words boys!!
CB 316...fine looking holsters, love the colors...how did you get that yellowish color?
JD, most all my personal rigs are abby-normal...never much liked being the "same"!!
Problem is, at shoots no one notices what I wear because of "her"!!
Yep the wife had a bad problem with her back and hip...two stages and she was hurting bad!
What to do??? We always shoot together and that's the way it is!!!!!
Eyeballing through her Cowgirlly books, I spided " the Bronc-Buster belt".... Aha!!
I actually said that...Aha!! So I turned one into "the Bronc-Buster B-Western special".
No more back-hip pain, no more having to leave her pistols in the cart, no more gimping around!!!!!!!!!
YeHa!! When she's Happy, I'm Happy..ya know what I mean!!
Life is good!!!!But no one notices what I wear!!!
BH
Great idea brother! Nothing is more rewarding than making a beautiful, comfortable rig for your lady. Anything we boys can do to keep our girls shooting is well worth the time and effort! I'm about finished with my 2nd try at building the perfect gun-rig for my wife :) I'll throw pics up as soon as it's done.
-
Hey RT, great looking holster. I agree with Marsshall Will, great color, but then you seem to always have great color on your various projects. I enjoy looking at holsters that I have tools for. It gives me inspiration, even if I can't stamp as good!
Mr. Canelo Kid, fine looking holsters there. I'm a big fan of basket stamping, and you've done a great job of it with that first holster. The Wild Bunch holster is quite sharp. Is that your design? It looks very functional. Thanks for sharing your work, and welcome to the Forum. Like Ace said, there's a great group of guys here. JD
-
Howdy Pards, :)
i wanted to drop a note about what SS. said! you guys that have your gals shooting with you, don't know how lucky you are! I wished my wife would shoot, but she won't! She is a good shot to, but the guns don't mean anything to her. So when all you Pards that have your Honeys shooting with you, you all need to give them a big Kiss tonight and tell them talks for being a part of you Cowboy life.
See ya later on down the Trail!
ACE
-
Thanks All,
I appreciate your kind words. Yes, JD, the WB holster is my own design. The Vaquero sgl loop is a variation of Everyman's holster. When you come right down to it though, we all copy something to a degree. Been at this off and on for forty years since my Mom taught me to carve. Had to get my new bi-focals to start up again, couldn't hold the tools far enough away to see 'em. :o
As far as taking your better half out, Canelo kate has been my posse pard for ten years of CAS now and I couldn't be happier. I've had a lot of back issues and believe me when I say she will leave me at home to go to a shoot. I don't mind though as it sure makes it easier to get that new brace of pistols, or that sweet lil' double I had my eye on. ;D She says it's the best of both world, shopping and shooting! Got to get started soon on her Anniversary Rig as promised. I'll post when it's done as she wants full floral carving.
Safe trails,
CKid
-
hey pards
just finished up my first mexican loop holster from the Al Stohlman HOw to make holsters book
dyed with a feibings russet and the wide border is cot a coat of feibings dark brown
enjoy guys
Cowboy316
-
C316,
Looks great! Ya done good there. ;D ;D ;D
-
Howdy Cowboy
Very nice job.
WC
-
Howdy Cowboy,
Beautiful work! Great job of carving and stitching! Looking forward to seeing your next projects. Thanks for sharing.
-
Howdy CB316,
AWESOME, I am lost for words :o I know that is hard for you all to believe, but what more can I say!
Thanks for sharing, it is Beatifull!
ACE
-
You keep going like you are Cowboy, you're gonna start giving carving and holster making lessons. Nice work, JD
-
Cowboy, you done good pard.
Realy nice carving and color to this one. Your quality of craftmanship is top notch.
Johnny Dingus
-
Cowboy, your carving is outstanding. Nothing else can be said. Sent a PM to you.
-
got the making of good holster down now just need to find a market for them cuz the wife is bout to ring my neck if i dont start making some money with them LOL
Cowboy316
-
Guy, I hear you. I've got more holsters than a sane man needs.
-
CB316,
You and I are in the same boat! I think, I will start putting stuff on ebay and just take what I can get! CB, i didn't mean quality wise, I ment money wise! I have allways tried to get my hobbies to pay for them selfs! Never had enough extra money, to have stuff laying around! I figure, If I could just recover the cost of the leather, I would be happy! :)
There's no doubt in my mind that you will have any problems selling the stuff you make! but there is a lot of compition in selling leather goods, because there is so much of the Mexican Imported Cowboy gear!
Latter
ACE
-
Doggone, that looks really nice, Cowboy. Good work. I like the color you got on it.
-
hey pards you guys are gonna get sick of seeing all theses but i just enjoy making them and showing them off this one is for a .357 Smith & Wesson 3 1/2 inch barrel open toed but i stitched the bottom edge before i stitched the sides then did a coat of light brown let it dry then went to put another coat on and grabbed my dark brown by mistake :P but it worked out i dyed the back grounding with USMC black and made the carving really pop and buffed the tar out if it LOL
enjoy pards
Cowboy316
-
They just keep looking cooler and cooler! Bravo!
-
Really slick there Cowboy. I think you'd find a market on E-Bay, but you'll probably have to find someone with a good digital camera and some light. E-Bayers are a visual group, since that's all they have to go on.
Looking good! JD
-
Cowboy, you get more over the top on every piece. I love that color.
-
hey guys thanks for the kinds words i really enjoy the friendship here and all the encouragemnet you guys give
im gonna be trying a gun belt here soon so pull your hats down tight and pull up another notch on your gun belts LOL
Thanks again
Cowboy316
-
Good job Cowboy
-
Good call on the black background!
-
Looks good, Cowboy. Congrats.
-
howdy pard me again with a holster for a .38 colt 6 inch barrel base dyed buckskin the edge dyed dark brown and mahogany and the background is done in light brown
enjoy guys
Cowboy316
-
bEAUTIFUL c316, You're really knocking them out these days, I'd say you're hooked.. ;D
Regards
tEN wOLVES ;) :D ;D
-
Really looks nice Cowboy with the 3 tone almost looks like real nuts. ;D
Real nice carving also.
Johnny Dingus
-
Good job, pal. I am a sucker for basket stamping and oak leaves. Good color too. God bless, JD
-
Really nice two tone work, Cowboy. You've got those oak leaves down good, too.
-
Howdy Pards,
Well, my blue gun models are working out just great for casing holsters. Here is the latest pancake style for a S&W Sigma 9mm.
-
Very nice work, Outrider. I like the border stamped without a cut line to follow. It gives it a nice look.
-
Thanks Marshal...I usually don't cut my border stamp lines
-
Cowboy thats another great one pard.
Outrider you do come across with the cleanest looking rigs :o Wish they made more of those blue guns for cas
-
GB I think they only make the uberti in 5.5 and 7.5 (which I bought). But your right I wish they did also. Well at least they can get you a Colt SAA sized frame. I am expecting a delivery of four more of the blueguns...I buy them four at a time. I currently have an order for a pancake for a Beretta PX4 Storm...so I am awaiting the bluegun for it as well.
-
Howdy Outrider
I like everything about this pancake holster, nice design, just enough grip forward cant to make wearing a holster like this comfortable, that really is a great pattern, I'm going to have to see if I can come up with something as nice.
Regards
tEN wOLVES ;) :D ;D
-
TW
Ask and ye may receive :D :D :D ;D
-
TW
Ask and ye may receive :D :D :D ;D
me ask, and thanks for the offer
tEN wOLVES ;D
-
Howdy Outrider
Great lookin holster.
WC
-
Outrider, you sure do produce sharp looking holsters, with clean lines, great stamping, and good color. You are definitely a pro. Thanks for sharing, JD
-
Outrider
very slick holster wouldnt mind having that in my pattern collection LOL
keep up the great work love your work
Cowboy316
-
Just figured I'd pop up and pipe in and let you all know I'm still alive and working hard. So I finished my gunbelt for my '51 Colt Navy. Here's some pics! Not an exact match for my holster, but it'll be better than just my regular belt.
(http://forums.horsecity.com/uploads/1244148900/gallery_20846_992_52624.jpg)
You can see the difference in the dye work I did on the two pieces. One I did to make it look like it's brand new, and the other I added a little age to. I need to work on these techniques because they're not all that great. But they are progressing.
(http://forums.horsecity.com/uploads/1244148900/gallery_20846_992_46683.jpg)
Generally though, the holster has a coat of Fiebings Leather Shene, but the belt is hand-buffed and waxed. The buffing came along really well, and I finished it off with Blackrock and a good brush buffing. The back of the belt still needs to be dyed.
(http://forums.horsecity.com/uploads/1244148900/gallery_20846_992_21995.jpg)
Range marks and scuffs sort of fortuitously landed where there would be scuffs from sitting against a rough surface. Kinda gives it character, so the antiqued look sort of works here.
(http://forums.horsecity.com/uploads/1244148900/gallery_20846_992_71060.jpg)
And it hangs nice on the hip.
(http://forums.horsecity.com/uploads/1244148900/gallery_20846_992_7354.jpg)
Have a good night everyone! :D
-
It looks great! Nice work. JD
-
Howdy RT
Good lookin. Nice job.
WC
-
Howdy Outrider & RT,
That is some beautiful work you Gents have posted. Thanks for sharing this with us.
-
Great stuff bein' shown, fellas!
-
Howdy Rt
Very nice Pard, nice rich color, and the color/ tone and shade look good to me, like you said a slight aging, I really like your choice of border tooling, all in all this rig looks great, a BIG WELL DONE for sure. ::) :o 8) ;D
Regards
tEN wOLVES ;) ;D
-
I wanted something simple, and old-fashioned looking so I just did the shell up the sides, and the veiner and small flower. Reminded me of something I'd seen in Packing Iron. And besides, you guys are always doing these really sweet, tasteful rigs, so I had to see if I could do something similar. :D
-
RT
got one word for your rig "SWEEEEEEEEEEEEEEEEET"
Cowboy316
-
LOL. Thanks man. :D I need to get around these parts more often too.
-
hey guys me again with a version of the patter Slowhand Bob posted for us to print out and use i left the skirt off but thats all i did so the pattern
enjoy pards
Cowboy316
-
Really good work, Rt, Cowboy. I roll in from Colorado and such places and find this great stuff. Thanks for the posts.
-
Nice work 316, you're getting to be an old hand at this, well done pard ::) :o 8) ;D
Regards
tEN wOLVES ;) :D ;D
-
Love the scroll work on this! Very tastefully done!
-
Howdy CW 316,
Very very nice! you are becoming a true artist in leather. Many thanks for sharing this with us.
-
hey pards this is for you Will Ghormley Fan whiich im proud to say I AM TO after doing this Cheyenne Style holster the was in The 2001 10th Anniversary issue of The Leather Crafters & Saddlers Journal and the carving Pattern is one of Wills to that Mr Santee sent me awhile back for Colt & 1/2"Forty niner parrten
thanks every one for the help and encouragement
Cowboy316
-
Boy, Cowboy 316, you're just flat knockin'm out of the park! The last two have been great. I'm going to attempt to use Slowhand Bob's pattern as well this week. I will keep the skirt, because it seems to help stablize the holster when it's in use. I willl mock one up first, to make sure my NM Vaqueros fit like I want them to.
I cut out and glued a holster from one of Outrider's 1911 patterns yesterday (Thanks again Outrider!) I will stitch it up later today or tomorrow, (got to get to church, they're expecting me!) and hopefully it will fit the Para O. auto I'm making it for. I had to add a little to the pattern, because the Para is stouter than the Colt single stack I believe the pattern was intended for.
Good work, keep it up. I'm certain you should be able to find a market for such fine work
JD
-
Howdy Cowboy
Good lookin Holster. Nice job.
Keep um coming.
WC
-
That's very good incising, Cowboy. Nice work. 8)
-
Beautiful work Cowboy, I am going to try some of that incise work on my rifle sling. Got any words of wisdom before I get started ;)
-
Howdy Cowboy 316,
Like I said, you are artist in leather. Thank you for sharing your fine work.
-
thanks pards for all the kind words make me feel good and im enjoying what im doing
GB and for words of wisdom im short on them there idears but i got one word "PRACTICE" LOL
and i just got an outline for a pistol a long time family friend has a Colt .22 lr single action Frontier Scout
a Wyoming collecters edition cant remember what they called it but there were only lie 1500 made
so im gonna do a something special for it even tho it may never see the pistol in it LOLhe keeps it in the box un shot
well better get to the leather shop and get some fringe leather and some spots
thanks again pards for the help and encouragement
Cowboy316
-
Like others have said, 316, absolutely beautiful, I could only wish I had a steady hand like yours, you're a real talent to say the least, so keep them coming, you're an encouragement to all of us to do better.
Regards
tEN wOLVES ;) :D ;D
-
Awful lot of nice work gettin' posted these days.
My congrats to all. Gettin' hard for me to keep up with all the new leather being posted.
I guess just another example of how valuable this board is.
Well done, pards.
-
Howdy C316,
Now I gotta wipe the drool off of my 1950's tie. Wow, that is Beautiful!! ;D ;D ;D Thanks for sharing!!
-
Nice work! Is that an antique dye?
-
Thanks pards for all the kind words its taken to heart
Santee my friend believe it or not thats just evoo and Skidmores for the finish
thanks again pards ive got a cool one in the works now just need some buckskin for the fringe LOL
Cowboy316
-
Reproduction of Roy Rogers Saddle
Hey Folks,
Just over seven years ago, I became the only saddle maker in the world to be allowed to go behind the glass at the Roy Rogers & Dale Evens Museum in California, and make a replica of Roy's saddle, (and yes, I do intend on haveing that carved on my grave marker).
Well, all the photos I took of the saddle got lost in a computer hard drive crash. Just today, Dutch, (the director of Happy Trails Children's Foundation), had new photos sent to me. They were so much nicer than the ones I lost, I canged my whole Roy Rogers Saddle page. To see the photos, click this link:
http://www.willghormley-maker.com/RoysSaddle.html
Will
-
Will
Very SWEEEEEET looking have always loved the looks of that saddle great repo of it
love your holster patterns too
Cowboy316
-
That's beautiful, Will. You did an outstanding job on that one. I wouldn't be able to tell it from the original. Thanks for sharing.
-
June 18, 2009, now 300 pages of this topic full of beautiful work!! ;D
-
I agree with you Bob....there is alot of beautiful work in this forum......but sometimes it's hard to back track to try and find a specific item.
-
I've been perusing the early stuff and enjoying this thread all over. Some of the photobucket photos have disappeared but there are a lot more still showing. The ones that get loaded into the thread and have an icon to link to the photo will be there forever. Great stuff. I love looking at eveyone's work. :D
-
Hey Marshall ... is there a gallery section of the site? Might be a good place to round all these images up and submit them to for sort of an "ideas" gallery.
-
Good idea RT, A Pictures only Gallery, with maybe a caption of where they came from / thread and page, that sure would speed things up when trying to find something/picture / information, great idea, but it would take some work to put it all together.
Regards
tEN wOLVES ;) :D ;D
-
I made a butt cover for my '66 Yellow Boy today. It's the first one I've made. My wife sewed the strap on with her pretty heavy duty Janome. I switched over from another model rifle a few months ago, and found it hard to get use to the crescent butt. I'm wondering if there is a cool way to tie off the lacing. The pistol is from my dad's collection, passed on to me. It's been in the family a long time.
Now that I can do this again (Post stroke) I'm looking forward to making some holsters. JD
(http://i165.photobucket.com/albums/u51/HarleyPastor/Rifle%20Butt%20Cover/RifleButtCover007.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Rifle%20Butt%20Cover/RifleButtCover002.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Rifle%20Butt%20Cover/RifleButtCover003.jpg)
-
Perdy slick Padre! I'd only recommend that you lace it in the other direction, so that the knot is down on the other end. Other than that, I'd say that you covered your butt really well! ;D
-
Is that what Bass Ackwards is all about :o I laced it that way because all the pictures I've seen have them laced that way. I guess I haven't seen enough pictures! Now that you mention it, it makes sense.
Thanks! JD
-
Nice work JD, its good to be back isn't it. Most of the butt pads are laced like yours but I don't think its a rule.
-
Howdy JD,
Very nice! Its good to see you back in the saddle. Thanks for sharing this with us.
-
I'd imagine it depends on whether or not it interferes with the way you hold the rifle to your shoulder. To me, it makes more sense to have it to the back, but I'm not a rifleman either.
;)
-
We have a match today, so I will see how it works out. I rnay end up switching it around. I've done a little practicing, but this will be my first match since the stroke. I'm going to consider it a success if I complete all the stages, and don't drop a gun or shoot myself in the foot. :-\
Johnny, I watched your DVD yesterday, and I sure appreciate you making it, and sending me a copy. It is definitely helpful. JD
-
The idea of a Picture Gallery sounds good to me: it would be a terrific resource. Skeet.
-
Howdy JD
You did a nice job on your rifle but cover, you ask about the tying, I always start from the back and and lace to the front, after making a good square not, I pull the remaining rawhide lace back under all the way to the back, here are some pictures, you can do it anyway you want , this is just how I do it. hope this helps.
Regards
tEN wOLVES ;) :D ;D
-
The bead work is really a nice touch on that one Ten Wolves. Ads a bit of color to that Sharps!
Just got done with a West Texas holster for my neighbor. Enjoy!
(http://forums.horsecity.com/uploads/1245513245/gallery_20846_1021_45852.jpg)
(http://forums.horsecity.com/uploads/1245513245/gallery_20846_1021_62937.jpg)
(http://forums.horsecity.com/uploads/1245513245/gallery_20846_1021_44200.jpg)
(http://forums.horsecity.com/uploads/1245513245/gallery_20846_1021_35812.jpg)
(http://forums.horsecity.com/uploads/1245513245/gallery_20846_1021_22159.jpg)
-
Howdy RT
You did a great job on this West Texas Holster,I like the tooling and the way you adorned the loop with the spots and conchos's.
It has that old look to it, even your flower carving has that aged look to it, nice color too, well done Pard... ::) 8)
Regards
tEN wOLVES ;) :D ;D
-
Well, here's the real secret to making it look old, and don't ya'll go tellin' no one. I don't even think Chuck or David or OCB know this secret.
Alright. Everyone here? Pinky swear never to tell a soul!
OK. Here's the secret.
Use crappy leather and be a horrible leather carver. Works every time. ;D
-
Howdy RT
That is a good lookin holster, crappy leather or not.
WC
-
Howdy RT,
That is one outstanding Holster! Your neighbor will be very proud to wear it. Thank you for sharing this with us.
-
RT, you get the most awesome color on youir leather projects. I feel like sending you the things I put together for you to dye and finish them. Very nice work. JD
-
That's quite the compliment padre, but I'd be afraid I'd screw them up.
It does give me an idea, though. You know those quilts, where they send them here and there and everyone does a part? We should do something like that. But it has to be a piece that everyone can sign and put their name on. And if enough fellas want to do it, maybe we can do a few projects.
Then maybe we can auction them off or something, and send the money someplace it would help. Or simply give it to one of the members who is down and needs a little pick me up.
Sound like an idea? Who's in?
-
Is that what Bass Ackwards is all about :o I laced it that way because all the pictures I've seen have them laced that way. I guess I haven't seen enough pictures! Now that you mention it, it makes sense.
Nice butt cover, pard. Looks good. I lace mine the same way you did so I can get them on as tightly as possible. I make mine to fit snug. It's a stretch just to get them started.
Nice butt covers, 10W. I like the bottom one a lot.
Very good holster, RT. It really looks like a winner.
A photo gallery is a good idea. We may want to make a thread and when you post a good pic to a thread, run over and post a link to the pic you just posted.
-
I like the heart concho there Marshal, and that roughout gives you lots of grip I bet. Nice work!
-
Thanks, RT. That's on my wife's rifle. Her pistol rig has them, too.
-
Looks good Will, you were able to get it nice and tight too, which makes a big difference when putting to the shoulder, you don't want it loose or slipping around.
tEN wOLVES ;) :D ;D
-
Thanks, pard. It does work well.
-
howdy pards just finished buffing this slim jim holster dyed with feibings russet and a skidmores finish coat
the patterns are from me friend Ned hats off to him for all the patterns so here to Ned thank you pard
and every one else enjoy thanks for everything
Cowboy316
-
C316,
WOW!!! I really like the use of 2 different border stamps. I'd be proud to wear that to any shoot!! Ya done real good! ;D ;D ;D
-
Very nice Cowboy! Looks real good. 8)That's a design I came up with for Dennis Addler and it even appears in a couple of differant publications. Very low cut and an easy draw. Next time you make one try a toe plug in it, that's the way I did it.
Glad to see you're getting some use out of the patterns.
Ned
-
That holster is really nice 316, Ned did you good Pard
Regards
tEN wOLVES ;) :D ;D
-
Howdy Gents ;D
Well thanks to my friend Outrider in helping me with his pancake holster I made one and I really like it, you can vary the stitch line for different guns, I made this one for my Wife's cousin in Texas, I also made a shoulder holster for him too, both holster's were dyed in coffee, and finished the way I like to finish leather, both were wet molded to to a 1911.
Thanks for taking a look see
Regards
tEN wOLVES ;) :D ;D
-
thanks pards im greatful to Ned for the patterns
Ned
you say toe plug and i wanna run the other way im not sure
i can do it LOL
and on another note i got to take my work down to the local gun shop we had just open
and work a deal with him to buy holster from me talked to him today and he is interested in sell ing them
so i got my foot in another door and boy oh boy talk bout some sweet shootin irons made me drool LOL
thanks for all the kind words pards
Cowboy316
PS wasnt to sure on the belt loop so i made my own idea of how it should look and to my surprise it hangs good on a belt
so i got lucky
thanks
Cowboy316
-
C316,
Ya know, you brought up the only shortcoming with this here City. We NEED a drooling emoticon!! ::) ;D ;D ;D ;D
-
That's quite the compliment padre, but I'd be afraid I'd screw them up.
It does give me an idea, though. You know those quilts, where they send them here and there and everyone does a part? We should do something like that. But it has to be a piece that everyone can sign and put their name on. And if enough fellas want to do it, maybe we can do a few projects.
Then maybe we can auction them off or something, and send the money someplace it would help. Or simply give it to one of the members who is down and needs a little pick me up.
Sound like an idea? Who's in?
That's a good idea,i have always wanted a square piece of tooled leather with Will Ghormely's sig on it.Might have to get one from all the makers.A makers mark collection. ;DMy wife spends all my money,i cain't afford them fancy hollywood holsters.
-
Reproduction of Roy Rogers Saddle
Hey Folks,
Just over seven years ago, I became the only saddle maker in the world to be allowed to go behind the glass at the Roy Rogers & Dale Evens Museum in California, and make a replica of Roy's saddle, (and yes, I do intend on haveing that carved on my grave marker).
Well, all the photos I took of the saddle got lost in a computer hard drive crash. Just today, Dutch, (the director of Happy Trails Children's Foundation), had new photos sent to me. They were so much nicer than the ones I lost, I canged my whole Roy Rogers Saddle page. To see the photos, click this link:
Willl you must have hands of steel,i don't even want to know how many hours you got in that saddle.I was at Roy funeral service.My aunt and uncle knew him real well and an artist friend knew him also,i was goin to go meet him and show him my motorcycle,but the time i was goin he had passed,so i missed him by about 4 days so went to the services.They had the museum closed then,and moved it to Branson Missouri after.
[Dead link removed by moderator]
http://www.willghormley-maker.com/RoysSaddle.html
Will
-
Here's the way mine turned out.
Cowboy I'll be glad to answer some questions about the toe plug, just ask! ;D
Ned
-
Howdy Marshall Will,
Great Rifle Butt cover! I really like your choice of materials. Thank you for sharing your talents and expertise with us.
Howdy Cowboy 316,
Another beautiful job form your workshop! The double row of stitching looks cool. Many thanks for sharing.
Howdy Ten Wolves,
Outstanding! Those are great designs with a beautiful finish. Did you use Walnut dye or Coffe dye? Thank you for sharing your work with us.
Howdy Ned,
Excellent job on your Slim Jim rig! Great design and workmanship. Many thanks for sharing this with us.
-
Great work guys, thanks for sharing. It is an inspiration. JD
-
Howdy Johnny
Thanks for the kind words on my Shoulder holster and Pancake holster, these were first for me, and I was real happy with the way they came out, they were both dyed in coffee for 1 1/2 days, my post got passed up, I didn't think anyone was going to see these, thanks for taking a look see.
Ned your holster and gun belt look great, lowering the top of the bucket gives it that gun slinger look, Well Done Pard. ::)
Regards
tEN wOLVES ;) :D ;D
-
10 Wolves, the coffee dye job came out really nice. I haven't tried it, but that's gonna change today. Johnny McCrae sent me a sample of leather he dyed with coffee, if memory serves, that really looks great. Thanks for the inspiration.JD
-
Howdy TW
Great lookin.
You make me proud.
WC
-
Well Howdy boys!!
Some nice looking work going on here.
Cowboy316, you've got one nice string of holsters going on there!! Nice work!!
Ten Wloves its good to see ya found something good to do with coffee...how can something smell so good and taste so bad!!!
Great work on the pancake and shoulder rig...humm pancakes and coffee...do you do most of your work in the morning???
And I like those butt covers...most butts sure do need to be covered!!!
I do a few, and lever-wraps too.
BH
-
Howdy Pards
Thanks JD, I appreciate your comments Pard, give the coffee a try, I really like all these natural dyes, they just give a color nothing else can, or least that I've found.
Thanks WC, I'll bring this one and the others in for ya to see before I send them off, which reminds me I haven't posted them yet, Thanks for your help on all this.
BH, if ya haven't had pancakes and coffee on your shoulder yet, you ain't liven right, don't ya know. LOL, thanks for the kinds words on my work, you did a bang up job on your but cover and lever wrap, nice lacing too, thanks for letting us take a look see.
Regads
tEN wOLVES ;) :D ;D
-
Whew, I am having a hard time keeping up with you pards again. You are all turning out some great work. It is a priviledge to be able to see all of it.
Come to think of it, we probably see more fine leatherwork in one week than other people see in a month. And on top of that we get to keep it to look at whenever we want.
It don't get no better than this.
-
Howdy All
I almost forgot to post this,my wife's cousin in Oklahoma has a Walker 47 that was made in 1853, some of the family took pictures of it, thinking maybe I could make a holster for it, will I didn't have a gun to use as a pattern so I went to WC and he was able to help me out with this, the holster is also from the 1800's, the picture below is the new holster for it, it was dyed in natural walnut dye, and finished as I like to finish.
Thanks for stopping by
Regards
tEN wOLVES ;) :D ;D
-
Nice holster 10W, and very nice pistols
-
Darn, pards. I don't get a chance to look in for a day and there's a whole host of new stuff. You guys have been at it, for sure.
Nice holster, Cowboy. The color is just perfect for the piece. Nice border & stitching.
More nice holsters, 10W. I like the subtle two-tone look. Good work. That Walker holster is a good-looking one. The oldies are really interesting, too. Thanks for those pcs.
Very nice work, Ned. That pattern seems to do well in dark shades.
BH, good work on the butt cover and lever wrap. I haven't seen one laced up like that before. It really does have a nice, solid look to it. The contoured front edge of the cover is a nice touch.
-
Lots of nice things going on here folks........been trying to get caught up on orders after having pneumonia - got well - then got the flu >:( so haven't had much time to spend perusing the web other than a quick look see now and again...anyway enough jabber here's some pics of what I've been up to.......
A heavily aged belt with 1880's antique roller buckle ..........
(http://www.wrtcleather.com/1-ckd/1-2009/gunbelt-morin-2009-1-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/gunbelt-morin-2009-1-2.jpg)
Beaded Knifesheath.....
(http://www.wrtcleather.com/1-ckd/1-2009/knifesheath-jt-wilson-1.jpg)
Knife and Sheath - the knife handle is turquoise and beadwork....
(http://www.wrtcleather.com/1-ckd/1-2009/knife-sheath-morin-turq-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/knife-sheath-morin-turq-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/knife-sheath-morin-turq-3.jpg)
Carved Holster from Packing Iron - original was made in Montrose, Colo......
(http://www.wrtcleather.com/1-ckd/1-2009/holster-elswick-3.jpg)
-
Nice Walker holster, 10W!! Your pancake looks good too!
Chuck, nice work as always, but check your last pic. I think thats the same pic as the one before!
DM
-
Darn nice work, Chuck. I really like, well, all of them! I have to put a handle on a blade I got from Crazy Crow. I hope I can get even vaguely close to your quality. Thanks for sharing those.
-
I got me a Tom Stroh flintlock smoothbore ready to shoot and a flint Rocky Mtn rifle I'm building on, so after 36 years of packing the ole shooting bag and horn I figured it was time to retire the ole ones and build me a new set.........first thing I've made myself in a number of years ;D
The bag design, size, and decoration are based on the shot bags (one of the names used for such bags in the literature of the times) seen in the artwork of Alfred J. Miller who went to the 1837 Mtn Man Rendezvous.
The bag is 7 1/2" x 91/2" approximate........the body and strap are made from heavy brain tan that was not overly softened....the beadwork is typical Northern Plains style of the period - color choice and size was based on what was available per the trade lists and other documentation of the 1830's era.......bag is 7 1/2" x 91/2" approximate
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-pouch-1.jpg)
The horn is an original dated 1791 and later 1825 - I added the rawhide repairs to make it usable and added the beaded strap
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-pouch-2.jpg)
The back of the bag - the thong and buffalo bone toggle slip under the waist belt and keep the bag from swinging freely, yet allows the bag and horn to be easily removed without having to remove the belt..........You can also see the gusseted bottom which allows a bit more room for my big hands
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-pouch-4.jpg)
Inside - lined with bed/pillow ticking, also documented to time and place - it has a small inner pouch made from leather to hold greased patches, balls, or whatever....
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-pouch-3.jpg)
Some new and old accoutrements to go along with the new bag...
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-accoutrements-1.jpg)
Top row below the main horn - from left to right:
Cap horn for when I carry my caplock rifle, shotgun, or C & B revolvers - made it in 1973.....
Antelope horn powder measure re-enforced with buffalo rawhide (horn is the tip from the first goat I ever took back in 1973)
"Medicine" Bottle aka what one carries his beaver scent in - re willow covered with deer rawhide
Second Row
Original Ely Bros cap box circa 1840 - I carry a couple of spare flints in it!
An original powder/shot measurer circa 1840 - use it for my smoothbore
Bottom Row
Hand Forged turn screw out of late 1800's rake tine
"Bag" knife - re-shaped from an original Shear Steel table knife made by Robert F. Mosley, Sheffield (circa 1850-60's? - the style is older) - the bone handle is reinforced with buffalo rawhide
Hand Forged fire striker from a piece wagon spring found along the Oregon Trail near South Pass in 1974....
Anyway hope ya'll enjoy the look see and keep up the good work!!! cause I like looking too ;D ;) ;D
-
Thanks Dalton and I fixed it...
Will - which blade did you get? If you need any advice or?? give me a shout.......
PS - Got a bunch of Cowboy Gear coming up soon - big change from this type stuff - may have to relearn all over how to do things! :o
-
Howdy Bad Hombre,
Great job on your Holster and Lever Wrap. Very nice designs and workmanship! Many thanks for sharing.
Howdy Ten Wolves,
Another beautiful Holster from your workshop straight out of the pages of "Packing Iron". You have the dyeing and finishing process mastered. Thank you for sharing this with us and all of the help you have given me on dyeing.
Howdy Chuck,
Thank you sharing your talents and expertise with us. It is always a genuine pleasure to view your work. Its like taking a trip to a Western Art Museum.
-
Chuck, I am glad you fixed that pic! I love that holster!
Nice bag and horn too! Glad you made something for your self! I just made myself some saddlebags, and it was kind of enjoyable, although it took almost a year from the time I cut them out to getting them done.
Cant wait for your westerny stuff.
DM
-
Thanks Fellas for taking a look at my holsters, and the compliments and kind words are appreciated
Regards
tEN wOLVES ;) :D ;D
Chuck beautiful work as usual, thanks for the look see, I'm glad to hear you're feeling better :D
TW ;)
-
Sorry to hear about your health challenges Chuck, pneumonia can be a real bugger, nothing to mess with. Your work is nothing short of amazing, in a class all by itself. Thanks for letting us see your finished products.
10 Wolves, those are some cool looking holsters, and I agree with Marshall Will, really great color. It's nice to see the guns too!
JD
-
Howdy JD
Thanks, for the compliment, Pard, I'm really sold on natural dyes.
Regards
tEN wOLVES :D ;D
-
One of these days I'm gonna own me some Chuck leather. Gotta save up all my pennies now. LOL.
-
That bag is really beautiful, Chuck. I really like the beadwork on that one. Very, very nice.
I sent you an email about the knife, too. Thanks, pard.
-
Howdy All
TW brought the holsters in today, the pix don't even come close. They are much better in person.
WC
-
WOW, Thanks WC, I much appreciate your kind words,
I think I should post the other rig now, I made a holster and gun belt to go along with the holster I made for the Walker 47 Dragoon, and this one was for the Ruger Super Blackhawk in that same picture, I used my Ruger Flat Top 44 for making the pattern for it, I made it a right hand cross draw and a semi high ride, I put 10 bullet loops on the belt, I gave the back of the holster a higher backing, because the person that will be wearing this rig has a little tummy hang over, I thought the higher backing would be a lot more comfortable to wear, so here it is, hope you all like it.
Regards
tEN wOLVES ;) ;D
-
A COUPLE MORE
-
Very very very nice 10W!!! I like that one just as much!
Keep it up!
DM
-
Chuck, your stuff brings back memories of playin' the buckskinner game. I just don't remember any of us havin' anything as nice as the things you make . They are beautiful.
10W, that rig is just over the top. I love the way you get the subtle light and dark shading in your pieces. Also that border is superb, I really like the simple but elegant look.
-
TW
your work is top notch in my book love the color and style of the holster and the ammo belt looks wonderful me on the other hand still kinda gun shy bout trying an ammo belt but i think if i had a good pattern id be ok but to try to do it my self for my first one it might end up like my first holster in the trash bin LOL
thanks for sharing and keep up the great work pard
Cowboy316
-
Well, here is my latest project. Its almost done. Needs a coat of skidmores, and me to finish waxing the edges, but other than that, they are done.
Oh I need to find a nicer set of buckles, yet too. These are not riveted on yet, they are just there.
Finish is nothing but olive oil, olive oil, sunshine, a 20 minute dip in my coffee dye, and more olive oil, sunshine, and sunshine.
DM
-
Howdy DM
That's a good lookin set of saddle bags.
WC
-
Nice rig, 10W. Very good-looking. The color is really righ and does it justice.
Wow, beautiful saddlebags, Dalton. I like the border on it. Good work, pard.
-
Chuck, Thanks for the nice turquoise knife and beaded sheath. Wife said its the best piece of leather work shes ever gotten. Now I suppose she will want a rig by u also. Now she will leave my knives and sheaths alone . ;D The pict. doesnt do it justice. See u got my belt pict. up also, cant wait to get it.
-
Lots of beautiful work. Congrats to all. Skeet.
-
Howdy Ten Wolves,
Cowboy WC hit the nail on the head.... your work is Top Notch! It is always a genuine pleasure to look at what you do. Wish I could see it in person. Many thanks for sharing your talents with us.
-
Howdy Dalton,
Your Saddle Bags are outstanding! A great design with excellent workmanship. Looks like they are right out of "Packing Iron".
Thank you for sharing this beautiful piece of work with us.
-
Great stuff. Lovin' the colors you guys are gettin'! Keep it up.
-
!0 Wolves, I can say the same thing to you as to Rolling Thunder, I should send my leather to you guys for finishing. Actually, I could include Dalton, too. The workmanship on all of your leather is both first rate and inspiring; somehting to aim for.
Dalton, if you ever burn that wood you use for a backdrop, I'll have a difficult time recognizing your work! Seriously, your photos are always excellent.
Thanks for showing us how it's done. JD
-
JD, that is my too-big-to-fit pile of wood, and its slowly getting smaller. Its getting hard to figure out where just to lay things now. I need a new backdrop, lol.
Thanks. DM
-
The first 9 years we were in Oregon we heated exclusively with wood. It wasn't a big house, but it was old and not very well insulated. It usually took 7 to 9 cords of wood a year to heat it, depending on how cold it got. I cut every bit of it, hauled it off the mountains, split and stacked it.
Since moving to the city, I do not miss cutting wood, or getting up to a cold house! I do miss room for the horses and other lifestock, and having neighbors a few hundred yards away instead of a few feet.
-
Thanks GB, C316, Dalton, and Marshal Will,Skeeter, Johnny McCrae, Santee,and JD
Thanks pards, for your support and taking the time to look at my work, your kind words of approval is always appreciated and gives me an others the boost I/we need sometimes to keep going, I'm sure others feel the same way, we have a great family here, and I can only hope we stay this way.
Thanks
tEN wOLVES ;) :D ;D
Dalton
Your saddle bags are beautiful Pard, like I said once before, your work improves with leaps and bounds, I don't know how many levels there are, but your climbing the ladder real quick, and your photography looks great too, it makes looking a total pleasure. I've always liked your taste in border tooling your work looks classy and not over done, which is a look that I like.
Keep them coming Dalton
Regards
tEN wOLVES ;) :D ;D
-
10W, you said it perfectly, classy but not overdone, Dalton's stuff always appeals to me just like your stuff does. It's a look that I would like my own work to get to. So I will keep practicing.
-
10W, you said it perfectly, classy but not overdone, Dalton's stuff always appeals to me just like your stuff does. It's a look that I would like my own work to get to. So I will keep practicing.
Gun Butcher, thanks for the flowers Pard you made my day, and I hope Daltons too.
Regards Pard
;) :D ;D tEN wOLVES
-
Hey, thank you both for the flowers.
Everyone has their own style, and it helps to copy verbatim to learn another style. Just pic a piece out, and try to make it just like you see it.
The one I picked for the bag is in Packing Iron on page 59, but I changed the stamps a little, and didnt carve obviously. I really wanted to do more incised carving on this set of bags, but it looked good enough after the border, that I didnt want to overdo it.
DM
-
Wow, you cowboys are making some mighty fine looking leather work. My latest effort, the holsters are from a Will Ghormley pattern, the knife sheath and belt are my simple minded idea.
-
Howdy Wiley
Nice work on the new rig Pard, the way you did your carving it has that old look to it, very period, and how does the sheath attach, I can't see, it matches nicely with the gun belt and holster, Will Ghormely put out some great patterns, I always thought of myself as being lucky to have his patterns when I first got started in leather, but I still fine myself referring back to his patterns when making my own, they're hard to beat.
Regards
tEN wOLVES
And Wiley, thanks for the kind words on my work too Pard
-
Looks great Wiley!!!
I like that knife and sheath a bunch! Looks very westerny in my eye.
DM
-
Very nice work, Wiley. I really like that holster. 10w is right about it looking really good with the tooling you did. The whole rig has that historic appearance.
-
Very nice work Wiley, really impressive. Can I ask what you used to get the black, whch looks outstanding, as does the whole rig? JD
-
Howdy Wiley
Great job.
WC
-
Howdy Wiley,
Beautiful job! The Schofield looks right at home in this Rig. Thanks for sharing this with us.
-
Wiley, I have to agree with Johnnie, that breaktop looks like it was designed to go with the holster or vice versa ;) ;D
Great work.
-
Thanks everybody for the very nice comments, makes a cowboy feel good about his work, much appreciated. TW the sheath has a tang extending up behind the knife handle and then folded over and sewn down for the belt to fit through, you know pretty standard stuff. JD the color is just plain USMC black dye. Yeah ole Will Ghormley designed that holster for a 7" Schofield and I modified it to fit a 5.5 ", I also changed the straps didn't make it any better, you don't make Ghormley patterns any better in my opinion. . Thanks again guys, I need to get back here more often sure is a great group, just been kinda busy.
Wiley
-
OK guys if no one else is going to show anything I'll do one more and hope I don't wear out my welcome. This is a holster I made for a glock model 27, 40 cal. Very old style but still a good design I think.
-
Glocks never had it so good, Wiley. Looks like the lone star flag on it. Good holster, pard. Thanks for the pic.
-
Looks good Willey, nice design, even has a thumb break safety, well done Pard ::) 8)
Regards
tEN wOLVES ;) :D ;D
-
Things movin' a little slow around here today so take a look at this one I finished a couple of weeks ago.
Ned
-
Pretty slick Ned, good looking rig, nicely done, thanks for the look see ::) :o
Regards
tEN wOLVES ;) :D
-
Hey Wiley, nice looking pancake Glock. I just wish the picture was a little bigger so I could take in a little more detail. The eyes just aren'r as sharp as I'd like them to be, but it looks good.
Ned, sharp looking rig there. Can I ask what you used on the body of the holster to strenghten the stress points? Are those double cap rivets, or ??? I still know too little about this craft, so the more I can learn the better. Thanks JD
-
Howdy JD! ;D
Those are Chicago Screws with an "engraved" cap. I get them from Weaver Leather. I have them in both solid brass and nickle plate.
Ned
-
Sent You a E Mail JD. ;D
Ned
-
Ned, Wiley , those are some fine lookin' rigs. I like the three-tone on the pancake. I guess you can never go wrong with the Texas flag on there ;)
The matching buckles and concho look really good.
-
Wiley sweet lookin pancake holster i need to make some and get to the guy at our local gun shop he said he would be interested in buying from me
Ned my friend very nice rig love the belt design thats kinda what im looking for
great work guys keep it up
Cowboy316
-
That's a good-looking rig, Ned. The two-tone hardware works nicely with the black.
-
Thanks for all the kind remarks guys, I need to figure this photo posting thing out a little better, however on second thought, maybe I should just stick with the hard to see pictures if you know what I mean.
Ned, great job on that rig the color is very nice and the buckles and conchos are extremely good looking and well placed and balanced.
-
Howdy
That is one smart lookin rig.
WC
-
Howdy Wiley & Ned,
Ten Wolves comments echo my sentiments exactly. Beautiful work Pards. Many thanks for sharing.
-
Wiley and Ned you two are amazing nice rigs from both of you.
Thanks for sharing.
Johnny Dingus
-
ok pard here is my take on the Will Ghormley's Law Dog holster for the colt 71/2" barrel
i know ists definitley not Mr Ghormley's caliber of work but his pattern pack make it so easy
to do so check it out guys and let me know what ya think
thanks pards
Cowboy316
PS wonder if a 51 Navy Eig 36 cal will fit in here LOL
-
Nice, Cowboy, that should be a good one.
-
Yep, that should work out fine looking forward to seeing the finished product.
-
What do you make for a pard who wants a concealed carry right hand cross draw holster for a 5.5" Ruger NV in 45 LC. and he wants a western motif to it. Well... this is what I came up with old style without a thumb break, flared top with western floral carving, sure hope he likes it.
-
If he doesn't like it, I'll buy it! Send it my way. It makes sense to me if you are going to carry (In Oregon it's legal with a permit) you ought to carry that with which you are most comfortable using. That would be a NM Vaquero for me. I've put more rounds through a Vaquero than anything else the last couple of years.
Great job Wiley, it looks outstanding in every way. Thanks for the picture. JD
-
Wiley
only one word comes to mind for the set up AWESOME
keep up the great work
Cowboy316
-
WD,
Great job. I really like the colors!
-
JD, Dr. Bob, Cowboy, thanks for the kind remarks glad ya'll like the holster very much appreciated. JD if my bud doesn't like it I'll send it to you pard.
-
Howdy Cowboy 316,
Looks great! Be sure to show us the finished Holster. Thanks for sharing this with us.
Howdy Wiley,
Very nice! Your design shows a lot of thought and originality. You will have no problem finding a good home for this Holster. Thank you for sharing this.
-
Howdy Willey
Nice work, that's one fancy looking holster, your friend will be happy I'm sure.
Regards
tEN wOLVES ;) :D ;D
-
Cowboy that is going to be a great looking rig.
Wiley, you have got a winner there, I have never done a two-tone rig but I am starting to come around to the idea after seeing all of the great looking ones on here.
-
Gun Butcher, TW and Johnny, thanks for the kind remarks much appreciated. Johnny don't give me more credit than I deserve for originality the holster design comes from an old Tandy pattern I left off the thumb break.
-
Wiley, I think he'll be really pleased with that one. Nice work.
-
Howdy Wiley
Great job.
WC
-
ok pards here is my Will Ghormley 7 1/2 " Colt Law Dog holster with toe plug had a tuff time with the stitch line onbottom part but it will hold take a look and enjoy pards anf thanks again for all the help
Cowboy316
-
Very good, Cowboy. That's a nice-looking holster. That toe plug will do fine. After a few thousand, it'll be a breeze. LOL, just joking. You'll find the next one will go a lot easier.
-
Good job on the holster. Toe plugs seem to be a lot like sewing the welt on a boot sole and Marshall is right you will get the feel for where your awl is going to come out. It does get easier.
-
Howdy CB316,
That is a good looking Holster! Great carving & a nifty design! Many thanks for sharing your work with us.
-
CB316 nice work really like the carving and coloring on that holster toe plug looks good to me, now I guess I am going to have to try my hand at a toe plug soon.
WC and Marshal thanks for the kind remarks much appreciated.
-
Well I'm new to the site but what better way to get started than to don on yer boots hitch up the britches and pull down the hat and JUMP in. I bought a boot repair shop 3 yrs ago and was always asked to do this or that so I stared to do the custom stuff that people seemed to want so here it some of it. Don't have pics of the first but do after that. All criticism kindly accepted :o ;D Thanks, Preacher
-
Welcome Preacher. I'm a preacher myself, pastor at an Assembly of God church in Oregon the past 20 years or so. That's some nice looking work there. Thanks for sharing, and welcome to the Forum. You'll find a great group of Pards here, very helpful. JD
-
Howdy Preacher, welcome to the fire. I learned boot and shoe repair from ol Bob Ross at texas tech many moons ago. Haven't used those skills for about 28 years.
What exactly was it you wanted us to criticise. I just ask cause you must have left that picture out. I don't see anything in the ones you posted except some mighty fine lookin' work.
-
Howdy, Preacher. That's some mighty fine work you're doing. The tooling on both holsters looks very good. The little 25 rig is clean and nicely molded. Glad to see new pards in here. Looking forward to seeing more of your stuff.
-
You fellers are much to kind. But I'm not complaining. The 25 was just a real quick job. It's actually mine. I just dipped er in the bucket eyed it with the thumbs and walla an hr later. The 44 is a Jesse James money belt and holster .I hat to mod the pattern fron WG's patterns to fit this particular gun. The only thig that I don't like is that I got the belt loop to low which makes this gun rather top heavy. the other one pretty much turned out the way I wanted it. Thanks :-X
-
Howdy Preacher,
Welcome to the forum. That is some very nice looking leather work you have posted. We look forward to seeing your future projects. Keep em' coming.
-
With the recent discussion of carrying a large knife inside your boot on another post I thought I'd share this one I built many years ago. It's for a 9 1/2" blade Collins and Co. Bowie(more like a machette! ::)) Anyone know when this knife might have been made? I got it in a trade in the early 70's.
Ned
-
Now that would definitely keep at least one foot on the ground ;)
Very clean looking sheath and I like the color. Thanks for showing it to us.
-
That's really cool, Ned. I like the simple design with the straps. Thanks for the pic.
-
Well I just got a good education from St. George over at the "Cutting Edge Forum". here's his reply concerning my Collins and Co. Knife.
Ned
You have a Collins Survival Machete/Survival Knife - the V-44.
'V-44' has no relevance beyond being the identifier in a supply catalog.
First developed in 1934, for flying personnel in Panama and Hawaii, it was carried in a jungle bail-out kit attached to the parachute harness.
The Collins No. 18 was the first type, and remained standard until 1942, and they supplied 50,000 of them between 1934 and 1942.
They were also supplied by Case, Kinfolks and Western.
They were an ideal survival machete - the drawback for normal usage was their size - but for clearing brush and building shelters, they were handy.
Additionally, they were used in the Pacific by the Marines - but those are usually numbered, with 'U.S.M.C' - and most had a green horn handle - the black composition ones were of normal issue, procured through 'regular' channels, and yours would seem to fill that description.
The relatively thin blade makes it a poor choice for a fighting Bowie - the principal advantage being it's size being psychological - adding a 'dangerous' look.
They remained somewhat 'available' through supply channels for a long time, before they found their way onto the surplus market.
Some were even modified by individual SF guys who added 'sawteeth' for the added 'fiend appeal'.
Vaya,
Scouts Out
(Information from several sources - 'U.S. Military Knives' by Cole being predominant)
-
Here's a picture of the knife alone.
Ned
-
Thats neat Ned! I can see the resemblance in the handle shape to a regular issue machete.
Makes a cool and probably lighter weight bowie for our uses I bet.
DM
-
It's great fun to find out about it. ;D I've owned it for over 30 years and never knew a thing! ::)
Ned
-
That's a cool knife. I like those older issue ones. It's fun to make decent leather for them.
-
hey pards havent had enough leather to do any holsters so i decided to try my hand at bullet loops heres a belt loop with 5 bullet loops that can hold my 30-30 or my .270 bullets so there it my first try at bulltet loopets enjoy and feel free to give advice LOL
thanks pards
Cowboy316
-
They look real good! Nice and even, and most importantly, they hold the bullets where they are supposed to be.
DM
-
It looks like you did those loops fine. You may have already done this, but on the top stitch, I loop the thread through a second time so the stitch will be stronger ans less apt to come loose.
-
(http://)http://leatherworker.net/forum/index.php?act=attach&type=post&id=27771(http://)
(http://)http://leatherworker.net/forum/index.php?act=attach&type=post&id=27772(http://)
a knife I made
-
JBird, That is one fine lookin' piece of cutlery.
Bodie
-
Thank you
I should have said I made the sheath as well.
-
Howdy Pard
Say if you could post your pictures here we could all take a look, the link you gave takes you to another forum, where you have to be a member, I tried two times to register but they didn't like what I entered so I threw in the towel, that place will drive a pard nuts... ??? :-\ :-X :-[ :( >:( >:( ???
Regards
tEN wOLVES ;) :D ;D
-
Sorry pards
I don't know way happened I will try to fix it.
-
This is a right hand cross draw holster for a S&W 5 shot I designed and made for a friend with his cattle brand on it.
-
Very nice Willey, I'm sure your friend will love it ::)
tEN wOLVES ;) :D ;D
-
Thanks TW
-
It looks great Wiley. I especially like the color. Thanks for the pictures. JD
-
Looks great Wiley!!
DM
-
Nice work, Wiley. The Rocking 2 never had it better. ;)
-
Howdy Wiley,
Nice work! That's a pretty nifty design and a great look. Thanks for sharing this with us.
-
JD, Dalton, Marshal and Johnny thanks guys for the very nice comments much appreciated.
-
Howdy Wiley, :)
I realy think that new holster is AWESOME :o :o ! I like the use of a cowboy holster for a modern pistol, I have seen some done, I didn't like, but yours is very neatly done it looks great. The gun and the holster go good toghter!
Keep up the great work!
ACE
-
Wiley, beautiful job on that little holster. Very neat design.
Look who snuck in while our backs were turned. Glad to hear from you Ace.
-
OK, I finally got the Jaeger sling finished. Hope you like it, I ain't much of a photographer but here she is
-
G.B.,
I realy loke that sling! The scroll work is AWESOME :o, and it looks real nice on that rifle!
Thanks for sharing!!
Later ACE
-
Very nice, GB. I like the simple pattern down the length of it.
Good to see you back in business, Ace. Welcome back.
-
ACE,
Boy howdy, it sure is great to see you back here!! ;D ;D ;D ;D ;D ;D ;D
GB,
Fine looking sling! ;D
-
GB nice work Pard, looks right at home on that rifle
Regards
tEN wOLVES ;) ;D
I see my Pard is back, things are looking better :D ;D ;D 8)
-
Here is a Holster Rig I made for my ten year old Grandson. He wanted one something like Grandpa's. It sure felt different making a belt for a 25" waist. I also made him a facsimile of an old Colt pistol to go with the rig.
I used my new oscillating sander for the pistol and it worked pretty good. I also tried the sander on the sewn edges of a holster pouch. It took some getting used to but I like the results.
-
Johnny,
Great work!! That little pard will be 10 feet tall when he gets that! ;D ;D
-
That's really a cool thing to do for him. Very nice-looking rig. What is the other rig with all the spots? It looks good, too.
-
Johnny, he won't ever take it off.
-
+1 with Skeeter's comment. He's gonna want to sleep with them on. What a cool gift, even making the gun. You did a real nice job with those John, real nice. Thanks for the pictures, JD
-
Howdy Johnny
Well I think your going to make one little cowpoke happy as all get out, great work on both the rig and the gun, I'd of loved to of had something like this when I was growing up and playing Cowboys and Indians. WELL DONE Pal. ::) :o 8)
Regards
tEN wOLVES ;) :D
-
Johnny, that is just great,TW is right I would have felt like the King of the cowboys with that strapped on my jeans.
-
Many thanks for the kind words Pards. I'm now making a purse for his sister.
Marshall,
The Two gun rig shown is my personal rig that I use in matches.
-
What a great deed Johnny he'll never forget his Grandpa made him that rig he'll still be talking about it sixty years from now.
-
More nice work showing up every day. Nice rig Johnny! As soon as I get a grandson, he'll be outfitted proper too!
I finished this scabbard for my Pard Buckeye Pete today. He needed it to match his gunbelt and wanted a removable strap, which snaps to the back inside the belt loop.
-
very nicly done CK your pard will be proud to wear that on his waist i would be to
keep up the good work
Cowboy316
-
Verry nicely done basketweave Kid
-
That is a heck of a fine example of basket stamping. The color is very nice too. Thanks for sharing the pictures. JD
-
Very nice sheath. That basketweave is well done.
-
CK my thoughts echo the others, nice work
TW ;) :D ;D
-
Hi Johnny, :)
That is AWESOME :o :o !! I love the looks of that rig!! I will bet that Grandson thinks he is on top of the world!! I realy look up to you for doing that for your grandson, you have done something for him, that will last a lifetime, and he will never forget it!!!
The world would be a lot better place, if there were more Grandpa's like you!!
Thanks for sharing that Johnny!
Later Ace
-
The Two gun rig shown is my personal rig that I use in matches.
Thanks, Looks great. ;)
Nice work on that scabbard, Kid. Good design. You matched the belt nicely.
-
Howdy Canelo Kid,
Thank you for the kind words. Beautiful job on your Pard's scabbard. Great design and workmanship! It should last him a lifetime.
Howdy Ace,
It's great to hear from you! Many thanks for your very kind comments. This was a fun project for me.
-
Howdy Canelo Kid,
Man I didn't mean to skip your knife sheath, my head must still be fuzzy ??? ??? I didn't see it untill, I opened this thread just know!
I realy like basketweave and you did a killer job!!! :o I can't seem to get my basketweave as strait as you do! Great job!!! Keep up the good work!
Johnnny, it is nice to be back with my friends on here, I am still not super, It just got me down not being a part of this family, so I had to get back in the saddle. Man I wasn't given you kinds words, I meant every thing I sad!!! 8)
Life is so short, that the things you make for your family are so special, and to have people like you sharing that with us, means so much to me! I know one thing for sure, you grandson has a SUPER GRANDPA!!
Later ACE
-
Very nice leatherwork CK you did a great job matching the belt also.
-
Nice stuff, Kid!
Here are some dove wing spur straps I finished yesterday for the new spurs my wife got me. The photo makes the dye imperfections look blotchy and more red than they actually are. In person they look worn, brown and distressed (I wrinkled the leather like Chuck taught us, too).
-
Those look real good santee. I like the color and the authentic look they have. The spurs look great too. Nice gift! JD
-
Thanks, JD. The drop shank on them is gonna take a bit of getting used to.
-
Very nice Santee, I like the way the hook up is centered in the rosette, the color looks fine to me, I personally like the used look over the brand new store bought.
Regards
tEN wOLVES ;) :D ;D
-
Excellent job Santee! Ten Wolves comments hit the nail on the head. Many thanks for sharing this with us.
-
Hey Pard, :)
Those are AWESOME spur straps, I have to agree with the pards, they look great!!! Like TW said the Rosette came out perfect!!
Keep up the good work Bud!!
Later ACE
-
Santee, I didn't notice the drop shank until you mentioned it. I just wore spurs for the first time in my life this past Saturday. Our club hosted the 2009 West Coast Western 3 Gun Championship this weekend, and I managed to walk around in them without tripping, falling, or spuring myself. I just wish I had shot as good as I was able to walk with the spurs :-\
-
Thanks Ace,
I didn't feel the least bit slighted. ;D
Santee,
Nice spur straps. Just like most of the cowboys probably wore, simple yet functional, with just enough flair. Good work! :)
Safe trails,
CKid
-
Thanks fellas! JD, I saw the photo you posted in another thread, and your spurs will be fine. Mine are not very conducive to heel-toe walking.
-
Good leather work Santee also like the coloring.
-
Aw heck Santee they look rite pretty and you will get so use to that ring they make when you walk that you won't hardly be able to go without them ;) ;D
-
The workbench....
-
Couple of sheaths...
-
Few more sheaths...
-
Jesse James Holster for the new .45 Vaquero
-
Gun Belt
-
Welcome to the Shop!! Wow, all those bottles of booze and straight lines and excellent basket stamping. I might never get started with that set up!! :o ::) ;) :D
-
Howdy Camp Cook! Nice neat well stocked work bench, real nice leather work also. Thanks for sharing pard.
-
I was wonderin if you dyed some of your leather with the booze! Nice color, and nice work. Welcome to the Forum, and thanks for sharing the pictures. JD
-
Welcome C.C., :)
That is very nice leather goods you have made!! I am glad that you have joined our group. I think that you will realy enjoy group the pards on here!! I think they are the best in the world!!
Keep up the great work, and keep posting it!
Later ACE
-
Very nice CC, is that sheath at the bottom in Cognac
TW ;) :D ;D
-
Those straps really look great, Santee. Nice work.
CC, that workspace is nice. Very good work, too. Thanks for sharing the pics with us. It's always nice to see new pards' work.
-
Howdy Camp Cook,
Welcome to the Forum. You do beautiful work and have a great looking work area to boot! We look forward to seeing your future projects.
-
Thank you all for the warm welcome....
Spilling a little bourbon on my work just adds character.... ;D
-
Hey Fellers. Some where in this site i saw a thread with a formula on cartraige loops. Can any of you pard point me and my hoss up the right trail. Been on here so long my eyes feel like sand paper and my belly thinks my throats been cut. Thanks. Preach
-
Howdy Preacher,
You will find info under FAQ/HOW TO/SUPPLIERS thread under Cartridge Loops
-
OK. So here's the lastest. I'm making a set of holsters for my ferrier. I decided to give the leather the Marshal Will dunk and then work it. Seemed to go just fine. I was actually surprised at all the bubbles. First, no flash so you can see some of the detail.
(http://forums.horsecity.com/uploads/1248202667/gallery_20846_1072_35203.jpg)
Now with the flash so you can get a better idea of the color.
(http://forums.horsecity.com/uploads/1248202667/gallery_20846_1072_25407.jpg)
A close up on my really questionable stitching skills. And as uneven as it is, it's locked down tighter than Daisie Mae's chastity belt. So, pretty? No. Serviceable? Yes, and then some.
(http://forums.horsecity.com/uploads/1248202667/gallery_20846_1072_13655.jpg)
The finish on this is hand-rubbed, a very tiny bit of gel antique dye over EVOO. The shine? About an hour or so of hand-buffing with a soft cloth. Nothing else.
(http://forums.horsecity.com/uploads/1248202667/gallery_20846_1072_73336.jpg)
Hope ya'll liked it!
-
First knife sheath I ever made. For a 10 inch chef knife, first knife I ever owned.
Please excuse the poor picture quality....
-
Fine work on that holster RT. Nice simple pattern, excellent color.
-
Thunder my friend i think ya done did your farrier good love the color and the stitching looks fine to meand as for the Marshal dunk what color would that be ??? hes good at dunkin lots of thing but as for dunking im only good at dunkin doughnuts LOL
and hope with these 2 holster you pard can do your horses for free for a bit LOL
great word bud keep it up
Cowboy316
-
CC
a big welcome from Wyoming you will not find a better bunch of guys to help and get advicce from they are all top notch
great work bud kepp up the great work
Cowboy316
-
Cowboy, I could be wrong, but I think RT is referring to the amount of time Marshall Will puts his holsters in water for wet molding.
If I'm wrong, they will straighten me out :o
RT, that's one fine lookin holster. Did you receive that strip of leather in the mail I sent you? JD
-
Yes I did, Parson. Emailin' ya back right now.
And yeah, it was "Marshal Will's Water Dunk Technique" ... now, if I was over at Camp Cook's place, I'd dunk the leather in water and dunk some of that Crown into a shotglass. Don't know if that would be good or bad for my leather though.
C316 -- yeah, bartering off a bit of farrier work for leather sure don't hurt. I'm also repairing some front horse boots he has for him, and he was interested in some chinks. LOL. This leather workin' deal is pannin' out a little bit.
-
Howdy RT,
You did a beautiful job on your Holster. It has a great look to it. Many thanks for sharing this with us.
-
Nice work RT,
TW ;) :D ;D
-
That's a beautiful holster, RT. I like the color a lot. The Dodge City pattern is one of my favorites.
Very cool sheath, CC. The small basket weave looks good on it. It's always nice to have the first one you made. I don't have too many of my first items. You can always admire them and appreciate the excitement you felt then.
-
RT,
Very nice Dodge City rig!! I like the color and the stamping. I cut a Dodge city pattern out 3 months ago, but just havn't got inspired to do it yet!?
Thanks for sharing.
ACE
-
Well, Ace, it sounds to me like you need to get on that rig and get'r'done!
-
Wow,, you guys are doing some nice work. I can't believe how much I miss when I'm not on here for a few days :o
-
I know exactly what you mean!
-
RT real good looking holster the coloring is outstanding.
-
Thanks Wiley ... now, as with all things of this nature, I have to make it's mirror twin if it fits his pistol.
-
New project I just finished for my parents.....
Leather measures about 22". Pic looks smaller than real life.
-
CC, thats some really nice work. I love the presentation.
-
CC real nice leather work very creative of you pard they surely will enjoy having it.
-
That is really an outstanding sign, very creative. Thanks for sharing the picture of your work. I'm sure your folks appreciate it! JD
-
Cool, CC. The frame really sets off the leather. Good idea.
-
Howdy CC
That is very cool. Great job.
WC
-
Howdy CC,
Very nice! What a nifty way to make a sign! Many thanks for sharing this with us.
-
Nice work CC, good idea
TW :D ;D ;)
-
CC,
I realy like the name plate!! I like your design, I hope you don't mind but I think I might copy your idea ;D ;D
Keep up the GREAT work!!
ACE
-
Howdy all. Just lots and lots of work to be done. Spent the morning and most of the day yesterday working leather, and just got done with the stamping on a set of dove wing spur straps for a fella who simply cannot buy off-the-shelf stuff. Not because of his tastes, but because he has frickin' HUGE clod hoppers! Great guy though, and I was honored he chose me. Likes the color I get on leather, I guess.
Yes, that'd be you, parson!
Anyway, those are drying out on the tailgate of my truck in God's own microwave, and getting a tan to boot. Trying to get them done for you in time for the 3-Gun in Piru. At the same time, trying not to have them ruined by rushing them. We'll see how they're doing in about an hour.
And here's some roping cuffs I did for a friend of mine who rides in the rougher country. Her name is Denise, but we all call her Necey. Ya'll need to know how da Necey rolls. Usually about Mach 3 with lightning bolts shooting out her bum, and she rides in some of the rougher country. Well, she's been tearing up clothes like no one's business. Not a good thing to leave for a ride looking like Mrs. Robinson, and coming back looking like Robinson Crusoe. So I made her a set of roping cuffs to hopefully keep her from ripping up her sleeves much more.
Necey has very thin forearms, by the way, and I made these cuffs extra-long to cover as much of the forearm as possible. The hope is that she rides them all to heck and back, and can tell me how well they hold up.
(http://forums.horsecity.com/uploads/1249016747/gallery_20846_1093_5879.jpg)
Here's a detail of the billets and the pewter spots I used on these. Got them from Standard Rivet Company, and really liked them.
(http://forums.horsecity.com/uploads/1249016747/gallery_20846_1093_21648.jpg)
Here's the backsides and the lacing. I leave the lacing sticking out so you can pull them on a little easier, like having the pull-tabs on boots.
(http://forums.horsecity.com/uploads/1249016747/gallery_20846_1093_24008.jpg)
And of course, when a gal is riding out in the San Tans, ya gots ta have some authentic cowboy bling, right? So, more spots up top (pewter) and some very tasteful lace stamping.
(http://forums.horsecity.com/uploads/1249016747/gallery_20846_1093_13350.jpg)
And finally, my maker's mark. Considering I don't have a press for this badboy, I'm getting better at vise-applying it. LOL.
(http://forums.horsecity.com/uploads/1249016747/gallery_20846_1093_23406.jpg)
So, now I'm gonna spend the rest of the afternoon finishing a sent of chinks, those spur straps, starting a different set of custom straps, and a custom belt.
No rest for the wicked, right?
Right.
-
Howdy RT, :)
Realy nice looking cuffs!!! I have never made a nice set, and I wanr yo give it a shot one of these days! I don't think mine will be as nice as your's, but I am going to give it a try!
Thanks for Sharing!
ACE
-
Those look fantastic Roland. I like the pewter spots. Good news about the progress on the spur straps.
Maybe you could ship them to me at the hotel near Piru. The shoot doesn't start until Thursday with side matches, with the main match beginning Friday. That would give you a few more days to do whatever you needed to do. I leave Wednesday morning, and plan to visit WC's shop that afternoon. I can PM you with the info. Lookin forward to seein'm ! JD
-
Very cool cuffs, RT. Simple and classy. Nice job, she should get good use out of those.
-
Great job on those cuffs RT nice spots good color.
-
Well, it has been awhile since I posted here to show off what I've been doing, but today is the day. To begin with, my youngest graduated from High School and moved out to college, so the wife and I went on a diet. No junk food in the house helps. Been loosing inches which is great, but does upset the CAS leather fit. So I sold a couple of my proevious gunbelts, and took in a couple of my ammo belts. I've finally settled on 1875 Remingtons in 7 1/2" barrels as my main match guns, with my 1872 Open Tops as backups. Having kept the two burgundy holsters from my first holster building, I decided to try something different and make a Buscadero belt for them. I had a 3" belt blank laying around and some leftover shoulder material, so I came up with a two tone rig that is adorned in Stone Mountain Civil War Commerative Quarter Conchos I found on Ebay. Finished it about two weeks before my next match and enjoyed it, BUT --- by the time the match came, I was on the smallest hole. Decided I had to shorten it, so I cut two more inches out of the back of the belt and carved a Confederate Battle Flag patch to cover the seam. I wore it to my last match at the end of July and everyone thought it was designed that way.
We are having the Texas Regional NCOWS Match in Greenville, TX at the Ten Horns Club in November and I discovered that none of my holsters were NCOWS legal. So last week, I dug out some poster board, the pencils and my Remingtons and came up with my own design that would meet the regulations and be wearable over the top of a traditional gunbelt, rather than a Buscadero rig. They are 7 oz. leather, likewise lined in 7 oz. leather. I have shyed away from basketweave patterns on holsters in the past, because I thought they were sometimes too busy. Decided this time to give it a go, and also designed the Texas T-Strap (Jockstrap) with the carved LongHorn. Holsters are stained in Acorn Brown from Tandy and finished with EVOO for a very light and mild sheen. I really like the color and finish on these. I also changed my stiching from 5 stitches to 8 stiches per inch and in the contrasting stitch colors it looks much better. I believe these are my best efforts to date and appreciate any comments you may have.
-
Pictures of the New Holsters ;D ;D
-
Wow Preacher, those are fantastic. Love those jockstrap holsters. That Confederate patch is a really good idea.
bodie
-
Nice bit of alteration work there Preacher! Really like the new leather too! You can almost see yourself in the old leather ya got there! Wooo!
-
Howdy PC
That's a good lookin rig. Like the T Starp holsters too.
WC
-
Nice leather work Preacher Clint great design and like the coloring real well on the new holsters. Heck of a good idea covering the alteration on the belt. Thanks for sharing those pictures.
-
Here is the latest from Australia, hope you like it.
-
Another shot, I made the tree, it is a Wade style and the leather is Hermann Oak with Jeremiah Watt hardware.
-
Howdy All
Nice job on the holsters PC, keep up the good work ::) 8)
Ten Wolves :D ;D
TyG, That's one good looking saddle Pard, looks like you've been at this leather work for a while, thanks for sharing ::) :o 8)
TW ;) ;D
-
TyG
That is a good lookin saddle. Hope mine comes out half that good.
WC
-
Hey Ty,SHOWOFF,Feathers
-
Very nice work, PC. I like those TJ holsters a lot. They have a nice, balanced look. Very suitable for the late 1800's.
Whoa, TyG. What a nice sadle. I love the meandering tooling on it. Very tastefully done.
Thanks for the pic, pards. :D
-
Wow! TyG what a great looking saddle.
-
Apparently I'm the unlucky fella who gets to post after TyG's incredible saddle. Oh well. Can't all be as good as his, but we all do try our best, and that's what counts, right?
So here's the never-ending project (mainly because a whole mess of emergencies stuck it on the back burner here and there).
These are my friend Prairie Rose's chinks. Leather supplied by the one, the only, Jack Baumgartner (Saddletramp - my good friend, mentor, and just a good egg). Modeled by my neighbor's daughter, Sam. No, the chinks didn't fit her, but I had to get them on someone for these pics, and Sam was the only female available aside from Tori, and Tori is 9.
The photos aren't very good, but I'll upload some more later. This at least shows them off, so Michelle could see what is headed her way.
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_8748.jpg)
There are 3 separate flowers on these chinks. Two on the left hip, one on the right. The conchos are two-tone brass and nickel, and the billets, chapes, and straps are all sueded latigo splits. The back lacing is Dr. Jackson Black Latigo. All the stitching is hand-sewn. There is one concho of a "Prairie Rose" on the back of the billets.
The color is a mixture of Briar Brown highlight and EVOO. Tried not to get it too red, because if it was darker it might have looked a bit like ... well ... rodeo chaps. LOL.
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_19518.jpg)
The back panels are reinforced with the same 9 oz. leather as the hip and thigh plates, and held in place with sueded latigo splits hand-sewn to enclose chap snaps. The D-Rings are reinforced with double thickness body hide, and are bleed-knotted to the body of the chinks through 9 oz. leather thigh plates and 7 oz. leather conchos with natural-finish edges. All leather edges are hand-burnished with oil. The finish on all leather pieces is Eco-Flo Super Sheen.
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_2732.jpg)
Here's a close-up of the Rose between the two belt panels.
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_3252.jpg)
And here's a detail shot of the left-hand side's floral tooling. Be gentle, I'm not that good. LOL
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_64494.jpg)
Enjoy!
-
RT
very well done there pard love the tooling and the all around design one word comes to min SEXY
great job pard keep up the great work
Cowboy316
-
RT,
I sure pity the feller that has to follow you! WOW those chaps look great!! :o ;D ;)
-
Careful cowboy, that one's 17, and her daddy is handy with a shotgun. LOL. Not to mention she's like a niece to me.
Thanks for the kind words, both of ya. I appreciate it.
-
whoa there RT LOL im married and got a step son thats 18 not to mention i was refering to the chaps but reply does make a guy fell young again LOL
Cowboy316
-
Well, RT, you've outdone yourself on this one. Those look great. What a beautiful job. Thanks for sharing.
-
Howdy RT
That's a good lookin pair of Chinks. Nice work.
WC
-
Howdy RT
That's a good lookin pair of Chinks. Nice work.
WC
-
Howdy Everyone,
I'm on my annual Sturgis trip and this is the first time I've had computer access in many days. In the meantime there has been a lot of great leather work posted. My compliments to everyone for a job well done.
I took some pictures at the Custer Battlefield in Montana and the Buffalo Bill musuem in Cody, WY. I'll post some slide shows when I get back
-
Nice work RT, pretty model too
TW :D ;D
Howdy Johnny, sounds like you had a great trip, I'll be looking forward to seeing your pictures
TW ;) :D ;D
-
I agree Johnny! Can't wait to see them!
Don't sweat it 316! LOL.
-
I'm on my annual Sturgis trip and this is the first time I've had computer access in many days. In the meantime there has been a lot of great leather work posted. My compliments to everyone for a job well done.
I took some pictures at the Custer Battlefield in Montana and the Buffalo Bill musuem in Cody, WY. I'll post some slide shows when I get back
Glad to hear you're having a great time, pard. Looking forward to your photos. We'll see you when you get back.
-
RT, :)
Those chaps are AWESOME, I realy like the way the carving flows with the design of the chaps, just the right amount of carving to set them apart from the average!!
Thanks for Sharing!!!
Howdy Johhny, :)
I am glad that you got to go to Sturgis, It is Beautifull county up there, I like Spear Fish and Deadwood, I plan on going back up there one of these day!!
Have a good time and a safe ride Home!!!
ACE
-
Very cool chinks RT like every thing about them, never made any chaps or chinks but you give a fellow inspriation might give it a try one of these days.
-
Howdy All
Made this belt yesterday, finished it up a few minutes ago. Still have to go to the silversmith to get the tip off the old belt.
WC
-
Detail pix
-
Very nice looking chinks RT. I don't see anything that I don't approve of ;)
Wc, as always nice work pard, thats gettin to be your signature style of carving and it do look good on anything.
-
That's some fine belt work, Wayne. It'll be interesting to see how some of us do now with your influence. I know my work will be a little more interesting. Thanks for sharing.
-
G'Day RT,I really like those chinks & I love the way you used those concho's (I posted this pic a while back)these were my 1st effort with a pair of chaps for my daughter.Great job Feathers
-
Heck, Feathers. Those put mine to shame, and then some!
-
I got to see this belt up close and personal, and the picture doesn't do it Justus, WC's carving is totally top notch. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
G'Day RT,Not at all those have given me a geat idea for a pair of chinks for another daughter,I may use your design,if you don't mind.Feathers
-
I agree. WC has the scroll work and deco cuts down like nobody's business. I need to woodshed a lot more before I even remotely think I'm that good.
Here's some up close stuff of those chinks, the carving isn't great, but it's not bad. It's the reason why the design-side of my work is stronger than the carving side. But, once I actually get out of production mode, I'll be able to do some of that woodshedding.
And target practice. And riding.
Here's some closeups, Feathers, if that helps any. I free-handed the flowers based in part on the concho on the back.
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_1373.jpg)
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_7242.jpg)
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_3423.jpg)
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_24615.jpg)
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_15959.jpg)
(http://forums.horsecity.com/uploads/1249487840/gallery_20846_1100_4056.jpg)
Enjoy!
-
hey there RT i should have you design me some patterns i love those flowers id love to try my hand at carving those
Cowboy316
-
LOL. Well, all you have to do is think of what your typical floral tooling is, then draw it with your non-drawing hand, and you'll pretty much have it. ;D
-
WC your work is outstanding I wish I could do accent cuts with a swivel knife like you do really nicely done.
Feathers those are some fine chaps pard. You and RT need to get in the rodeo cowboy chap business.
-
RT & Feathers
Both of those are good lookin.
RT
Your carving is very good, don't hang your head for any reason.
WC
-
Howdy All,Altho it's not all leatherwork,I thought you might get a kick out of my horseshoe roper.LIke the chinks RT,any holster guys got a plan for his gun.Feathers
-
Now that is just plain awesome, Feathers! Love it! And hey, although this post says "Leathersmiths ... show us yer stuff" it doesn't exactly define "stuff" so that there fella is a welcome addition!
And Cowboy, regardless of what I just said, it don't mean THAT stuff. :o
;D
LOL. Kiddin' pard!
-
RT beautiful work Pard, you're an ARTIST in your on right, I always enjoy seeing your stuff ::) :D
TW ;) :D ;D
Feathers, that's pretty COOL Pard ::) :o 8)
TW ;) :D ;D
-
Those chinks are very beautiful, pards. Both pairs have their own character. I really like the look they have. Thanks for all the pics. they're enough to make a pard drool.
-
Here are my newest holsters. Both for 1907 Savage .32Acp. The left handed one is for a customer, and the right hand one is for me (finally).
The pics were taken before a coat of Skidmores, which evened out the look on the dyed holster. The right hander will get a little antique work to bring out the details of the stamping, but otherwise is done.
It also doesnt look quite that red. That is a result of the camera flash. Boy I wish it was daylight, so I could use my log pile.
DM
-
I know this is not exactly CAS style, but at this time it's the best I can do.It's my 7th holster and 1st gunbelt.Dave :)
Specs:
Belt- 4" x 56" Ranger style w/2" billets, double layer of 10 oz Edge tooled and around inlays
Holster-two inlays, Flap retention by rare earth magnets
belt loop,sheath,double mag pouch, and extra ammo pouch all inlayed
all inlays ,ten in all are croc,all handsewn
The knife is by Lowell Cobb of florida and the gun is a Wildey .45 winmag
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt13.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt12.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt11.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt10.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt9.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt8.jpg)
[Dead link removed by moderator]
-
Dalton, we were posting at the same time. Very nice holsters.Dave ;D
-
Dave, your work is very nice as well! I had a customer ask me about using magnets awhile back. Its something I need to explore more.
The rest of your rig just looks marvelous!
DM
-
Thanks DM, I used two 3/4" x 1/16" disc's because that was what I had in stock.I inlayed them and covered them with pigskin,and put them against a piece of 440C stainless.I got them here http://www.kjmagnetics.com/products.asp?cat=10 (http://www.kjmagnetics.com/products.asp?cat=10).Dave :)
-
Thank you for that tidbit!
DM
-
Dalton great looking holsters.
Dave what a beautiful rig that pistola looks like it would drive tacks and very quickly.
-
Holy Cow! I get away for a few days and the place explodes with quality work. I had to go back 5 or 6 pages to catch up from the last time I looked. Great work everyone, starting with Clint and moving forward. Like 10 Wolves, I got to see WC's belt in person, very sharp. The saddle is incredible, as are both pairs of chinks. Holsters & belts, my oh my, such quality.
Here in Piru I'm seeing many different rigs, from great quality to cheap stuff, lots to look at. The shoot's great.
Johnny, I visited Custer's battlefield & Bill's place in Cody on my last trip to Sturgis. They are very Cowboy, and well worth the trip, though the battlefield is sobering, as is the Military Cemetery, which I didn't know was there.
Nice work everyone, very inspirational, JD
-
Howdy All
Dalton & Dave, I echo what the others have said, you both did beautiful work, and thanks for the look see ::) :o 8)
And Dave Welcome to the forum, it's good to have you riding with us. ;D ;D
Regards
tEN wOLVES ;) :D ;D
-
Nice holsters, Dalton. I like the geometric stamping on yours. It suits it nicely.
Very good work, Dave. That rig is a pleasure to see. The insets give it a very balanced look. Black works well with it, too. Thanks for the pics.
-
DM & DC
Good lookin holsters both of you.
WC
-
Hey Pards beautifful work on all of your projects. I have to echo JD. It is gettin' real tough to keep up around here.
-
Dalton,
Those holsters are awesome, If I had to pick one over the other, I don't believe I could do that!!! :o Both those holsters have great lines and there own style!!
Great Job!!!!
David,
The rig you made looks perfect :o the detail and design flows so nicely toghter that there isn't anyway to improve it! It shows me that the sky is the limit, as far as your leather crafting ability goes!!!!!!!
Keep up the AWESOME work!
ACE
-
I gotta echo what JD and Gun Butcher said. I'm still getting back to reality after my trip and having a tough time keeping up with all of the great work being posted. Again, my compliments to everyone for their excellent work and a hearty welcome to our new visitors.
I'm working on a purse for my Grand daughter and another wall plaque with a "Coffee Dyed" Holster. I also picked up a Cimarron Richards Transition on the way back from out west. I need to make a Holster for it and order some reloading dies. Lee Precision is around 60 miles from my home so I'll take a ride there next week.
So much to do... So little time! Good thing I'm semi-retired.
-
Real fine work everyone, real fine. I too went on a little vacation for a few days, and was tickled to see all the great work posted in the last week. Got to see the Oregon coast, beautiful....
-
Hey All,
My first try at western leather. The crossdraw was actually a strong side that I made first, unlined 10oz. I was able to convert it to a crossdraw (good thing because I was coming off of shoulder surgery and couldn't do a whole lot of leather work. The strong side is a lined 9 oz with pigskin liner. Both work well. I'll use them until I get around to making two lined once I really know just how I want the guns to sit.
(http://i844.photobucket.com/albums/ab10/andym45/rig1.jpg)
(http://i844.photobucket.com/albums/ab10/andym45/rig2.jpg)
-
Howdy
Very nice work.
WC
-
Howdy WJ,
Welcome to the Forum.
You have done a great job on your first try at Western Leather! Very nice workmanship! We look forward to seeing your future projects.
Thank you for sharing this with us.
-
I agree! For a first time, they look terrific.
-
Looks like something your average Joe cowboy would have been proud to have. I like the realistic utilitarian look. Not everything back in the day was all fancy'd up. Nice work, and really good considering you had a bunged up shoulder.
-
Thanks all for the comments. I look forward to talkin to you all. I know I'll have questions as I get more into it.
Whiskey James
-
Howdy James, nice work. I'm especially impressed with the shotgun belt, becasue (at least for a newbie like me) they are not easy at all. Thanks for sharing your work with us, and welcome to the forum. JD
-
Howdy folks!
This is a holster I made for a SA Colt.
Used a 10 oz. black latigo from Wickett & Craig. The pattern started from the Forty-Niner pak that Will G. sells, and I added my own variation with the back skirt and band. Side welt built-in and hand burnished edge.
What do you think is the best way to attach the skirt to the pouch?.....I prefer the leather ties as it looks more traditional than Chicago screws. Any other suggestions for attaching?
Thanks for viewing!
-
Do it the froggie way! Ribbits, ribbits, ribbits! :o ::) :D
Sorry fellows, just couldn't pass that up! ;D ;) ;D
BTW, a fine looking holster. ;D
-
Thanks, Bob!....
I was thinking that rivets would be easier, but my concern was that the holster couldn't be hung on a drop- slotted belt since ya can't undo the skirt to thread it through the slot.
-
Howdy GW,
That is one sweet lookin' Holster. Very nice design and workmanship! Thank you for sharing it with us.
-
GW for the first time, you did very well, Welcome to the Leather Shop, we'll be looking for more of your work in the future, KEEP IT UP.
Regards
tEN wOLVES ;) :D ;D
-
WJ,
Great job!! I don't know how it could be any better for a firt timer!
GW,
Very nice holster, I like your border.
Glad to have both of you Pards on the forum!
Later
ACE
-
WJ & GW
Nice work both of you.
Good to have you here.
WC
-
Well, WJ, GW, you both put out some nice leather. I like the utility and function of your rig, WJ. It has a nice no-nonsense look. There's a lot to be said for keeping it clean. GW, The simple black with a simple border is effective with the accents on the keeper loop. That laced on skirt would make it easy to put on a drop loop belt. Traditionally, that is done when the holster is wet and before folding the pouch through the keeper. Your idea is sound. You could also sew it on but then, you'd have the same situation as with the rivets. What you have is sound. You can also replace the laces if they wear through in the future. Looking forward to seeing more stuff from you both.
-
Great work GW and WJ, I really hate it when new guys show up some of the rest of us ;) ;D
-
Thanks to all for your kind words! :D
Marshal Will- thanks for your input on the skirt, much appreciated! Although I have been doing leather for quite a while, holster making is pretty new to me. All my experience has been in the custom motorcycle end of the biz.
Always good to get an honest critique of my work so I can improve.
-
Hey there G W, that's a very nice looking holster. I learned something new from your post; I did not know you could stamp Latigo leather! You sure did, and it looks great. Thanks for sharing pictures of your work, and welcome to the forum, JD
-
Sorta opens the door to all manner of possibilities, including incise work ... hmmmm.
-
Latigo can be carved and stamped but it is hard to do. Takes a long time to get enough water in to it with all the oil and wax.
WC
-
But gouge and knife work would be a good for it, right?
-
WJ that is a great looking rig I really like the design and the coloring is great, to me it looks very "period correct" as they say, the shot gun belt is very well done as well.
GW very nice looking holster I really like the idea of using leather lace to fasten the keeper loop.
-
To follow up on RT's question about Latigo leather and carving, how do you "get enough" water in it to stamp it?
I'm hoping WC or someone can shed some light on that one. Thanks JD
-
Thanks for the latest comments!
JD- As for stamping the latigo, I don't use water. There is enough softness in the leather as is. Just whack it with the stamp! I have done plenty of basketweave inlays for some Harley stuff, and never had a problem with the stamping coming "undone"
Tooling latigo may be a different story, as I have not tried that
-
Howdy JD
GW is right, sharp stamps like good basketweaves and camo will work without wetting the leather. As far as carving it the amount of water depends on the latigo. It's trail and error.
WC
-
Ken Parker's dog training pouch. It's for carrying treats for his pups in training, as well as for his older dogs. The inside is waxed so the treats don't rot the leather.
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1116_108344.jpg)
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1116_23663.jpg)
It's also custom monogrammed. He originally wanted it to say "Parker's Dog Training" however that would have been a LOT of small words and would have been really tough to do in leather. LOL. Not impossible, but really would have been crammed. The monogram was much more tasteful.
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1116_62036.jpg)
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1116_59894.jpg)
The billet locks by passing through a keeper and the spots hold it in place. It has just enough slip to come back when you pull it, but holds when it's in there.
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1116_50792.jpg)
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1116_62687.jpg)
Might also work as a cylinder pouch for a cap and ball revolver.
-
Here's my latest, though. It's a belt for Jessica Colvin, aka Cutter123. She trains cutting horses out in Cali. The tooling should look familiar to WC, as I think it was on his site that I found the pattern -- or maybe not. LOL. Anyway, if it is yours, I'm sorry it's not a better representation of your work. LOL. I also had to bling it up a teensy bit because it's for a trophy buckle. Got some close ups so you guys can see it warts and all. EVOO and Gel Antique Tan with a teensy bit of Briar Brown highlight, with bright nickel spots.
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1115_18886.jpg)
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1115_12804.jpg)
Close up of the spots.
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1115_30193.jpg)
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1115_90339.jpg)
The tooling. It's slowly getting better. Not great by any means, but better.
(http://forums.horsecity.com/uploads/1250270026/gallery_20846_1115_90956.jpg)
So that's what I've been up to lately.
-
RT
your amazing with your use of spots and color wish my color would turn out like that
great job bud keep it up
Cowboy316
-
That's one fancy belt Pardner, like 316 said great use of spots and your tooling, and the color is Awesome. ::) :o :D
Regards
tEN wOLVES ;) :D ;D
-
Howdy RT,
I would echo TW's comments. Very nice work! That is a great idea to use spots as part of a keeper. Thank you for sharing this with us.
-
Howdy RT, :)
AWESOME Belt!!!!! I realy like the carving and the lay out of the spots! The design of the belt is perfect!! There is no doubt that the lady that is getting that will be very very pleased!! Great Job!
Thanks For Sharing!
Later
ACE
-
Well. this quality comes as no surprise to me, now that I own a picec of RT leather (Spur straps) Your ability to set spots and get cool color is realy amazing. These are great examples of your work, and they inspire me to get my butt out in the shop and practice setting spots. Thanks, JD
-
Thanks guys. The keeper is sewn into the main body. I put three spots onto it, sewed it on, then set the last two spots, prior to final assembly. The keepers on the back are the same way, because field pants are typically tougher cotton duck canvas, and would likely wear the thread after awhile. So the spots keep them from doing that.
Funny you should mention practice setting spots, Parson. Cause I had a couple of mis-placed spots on this one. Could use some practice myself. LOL.
All in all, thanks for the comments everyone!
-
Very nice work, RT. The pouch is well done using the spots to keep it closed. That's a clever ides. The belt is also a fine one. those spots offset the tooling nicely. Thanks for the pics.
-
RT as always your work is outstanding!!
-
Howdy Gents ;D
I just finished a gun rig for a customer for his new model Super BlackHawk, 44 mag, I used my Ruger Flat Top 44 for a model, I dyed my leather in my walnut dye, and then sewed in the liner, and finished as I always do, he only want a few bullet loops because this will be his carry gun, while he works his farm, and tends his land, his land borders the forest, and they have all the critters hang out there.
So here it is, I'll show this in two post
Regards
tEN wOLVES ;) :D ;D
-
Here's the rest, My gun has a 6 1/2" barrel, and his is a 5 1/2" so it should work just fine
-
TW by geebers youve done it again by managing to knock my boots and socks off with your use of that walnut dye i just love it some day ill get some nuts and make some and your satamping makes my stuff look like a beginer LOL
all in all great work there buddy keep it up id be proud to ride with that on my hip
Cowboy316
-
10W, that looks great! Love the color on it. Very professional look too.
DM
-
Just flat out brilliant work 10W!
-
10W, WOW, that is flat out beautiful, I love the coloring! the design and stamping are great also. Goodnight, you guys have all gotten to darn good. I feel like Ned in the first reader when it comes to leather work compared to what ya'll are turning out, but thats OK cause it motivates me to try and do better. Outstanding!!!
-
Howdy TW,
Outstanding! Very very professional! This is as good as it gets and is really too good to wear on the job. Your customer will be proud to wear this. Many thanks for sharing your talents with us.
-
Well, TW. The pards here have said it. You really did a good job on this one. Nice work.
-
+1 on what the Marshall said!!! ;D ;D
-
Excellent job 10 Wolves (It's really great to put a face / personality to the responses!) As others have said, the color is great, as is the stamping and all the craftsmanship. Sweet job all the way around. I'm sure your customer will be pleased. Thanks for the excellent pictures, JD
-
Howdy TW,
AWESOME :o :o :o :o When I saw that rig, I had to get out the Packing Iron book to make sure you didn't take pictures out of the book and claim you did the work, ;D but all though it looks like it came out of the book , it didn't!! :) Picture Perfect!! TW, when I ever get that good, I am going to quit doing leather work, because you can't get better than that!! Guess what, It looks like I will be doing leather work for a long time ;D ;D.
All kinda a side, that is a Super Deluxe Rig and anyone would be pround to wear it. as my Mentor you keep the fire burning inside of me! Thanks my Friend.
ACE
-
Beautiful, TW. Just absolutely beautiful.
bodie
-
Howdy All :D
Well I took a break from my PC, I can't tell you how nice it was to come back and find all these nice comments about my new rig, you Pards really know how to make a guy feel good, and I thank each and every one of you for taking the time to put your comments down, you're all a great bunch of Pards and support team to say the least, I hope my customer will like it, at least he will look the part when he gets in and out of his tractor, or just walking around his property, I put a John Wayne cant on the holster, so I guess now he's going to need a hat to go along with it.
Thanks again Pards :D ;) ;D
tEN wOLVES ;) :D ;D
-
Dang son, Boy do you make me proud!
WC
-
Dang son, Boy do you make me proud!
WC
Howdy WC, and thanks Pard, after all you're responsible for all this, and I'm forever Gtatfull. ;) :D
tEN wOLVES ;) :D ;D
-
Just thought I'd share this with you guys. I decided to go WAY overboard on the design of something, throw in the whole bloomin' kitchen sink. I figured, "why not on a set of Carrico Dove Wings?"
This is what I got.
(http://forums.horsecity.com/uploads/1250475117/gallery_20846_608_85039.jpg)
And then of course I got all WWPID. Or ... What Would Packing Iron Do? LOL. So I took it into photoshop and made a gritty old lith of it.
(http://forums.horsecity.com/uploads/1250475117/gallery_20846_608_78163.jpg)
With the flash, you can see the lining details, and the little double-seeder tap spots I used on the corner.
(http://forums.horsecity.com/uploads/1250475117/gallery_20846_608_45561.jpg)
And then I WWPID'd that one as well.
(http://forums.horsecity.com/uploads/1250475117/gallery_20846_608_6465.jpg)
Can you tell I'm getting a bit ... bored? LOL.
In all seriousness, I'm working on some tooling too. I keep noticing things that improve from one project to the next, so I'm hoping to officially be half-decent at tooling in ... say ... 10-15 years.
Hoka!
-
Oh, and because I know the parson might be interested, that's pure Neatsfoot oil for color, a tiny bit of Saddle Tan thrown in, and then some heavily reduced Cocoa Brown to tint.
-
Whoa, RT. Those are fantastic. I don't like to wear spurs, but those could change my mind.
bodie
-
:o well well RT ive now got to go across the street and get my boots you just knocked them clean out the house LOL now ya got me thinkin id better get some leather and break out Wil's spur leather pack i just bout and give a pair a shot LOL
wonderful work pard hope this wallet im workin on now turns out half as good
Cowboy316
-
Well, I think I used about every tool I owned on that set. Seems like I do really well if it's either A) brand new looking or B) 20-year old looking.
Just can't seem to make 10 year old looking stuff. LOL.
The worst part is, though, everyone that sees dove wings loves them, but no one wants to buy them. Can't figure it out? They're very comfortable style straps. Just don't get it. LOL.
-
Duh, you can't put fancy buckles on dove wing straps! ;D ;D
-
Very nice RT, I think you have to be our resident spur strap Pard, every one you do is beautiful, and no one is the same, and your blend of colors always looks great, I think your stuck on Spur straps like I am on natural dyes LOL, just let it be known , and I think I speak for all of us here, it's always a pleasure to feast our eyes on your work, you have your own style, and technique, and it shows with everything you do. WELL DONE Pard ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Ten Wolves and RT , really great work on those projects pards. Its killin me not being at home so I can get out to the shop and looking at the fine work youall are doing.
-
Howdy RT,
Beautiful work! Excellent design and stamping layout! Thank you for sharing this with us.
-
Very well done, RT. I like the whole boat treatment. The sepia pics were fun to look at, too. Thanks for sharing.
-
RT
Those are way too cool.
WC
-
RT those are very nice. ALMOST as nice as the ones you made me ;D
I think Dr Bob is on to something. I also like the big wide ones, like I've seen Chuck Burrows make, and they look sharp with a big, cool buckle..
Seriously, your work there is off the hook, just like with mine. I appreciate the info on the colors, but I have no idea how it is you do that. You are the Color King in my book! JD
-
Might be I'll have to do you a video there Parson! :D
-
Howdy RT, :)
I have to agree with TW, You have a very Talented style!! Which puts your work in it's own class and I think that is what everyone goal is!! You have taken your artist ability and applied to your own style, all of your spur straps are AWESOME!!
Thanks for sharing, I never get tried of looking!!
ACE
-
Ten Wolves and RT , really great work on those projects pards. Its killin me not being at home so I can get out to the shop and looking at the fine work youall are doing.
Howdy Gun Butcher
Thanks for the kind words, much appreciated Pard
Regards
tEN wOLVES ;) :D ;D
-
I have a good friend that makes nice knives and I get to make sheaths to match. Here is one of the latest.
Ty
-
Another shot of the knife and pouch, he makes his own Damascus Steel, nice work.
-
That is a great looking sheath. Love the incise work. That is a very nice design.
bodie
-
Nice all around Ty, thanks for sharing, you do real well with that swivel knife. ::) :o 8) :D
Regards
tEN wOLVES ;) :D ;D
-
Howdy TyG
Nice knife and even nicer sheath.
WC
-
I agree. What a great partnership you have going there! Nice work!
-
Howdy TyG,
Very nice job on the Sheath! I agree with RT, that is a great partnership you have going there. We look forward to seeing your future work.
-
That's what i want to do on my first try.Can i use a sheath i already have that is blank?I have no problem with unstiching it and tooling then stiching back.Would have to bleach it(?) to get what little shine there is on it off.
If i go from scratch i have no idea of what thickness of leather to use.Is yours lined or just from one piece of leather.
Nice job on that :)
-
Really nice, Ty. Good incising on it. Very suitable for a fine knife.
-
Howdy TYG, :)
Thats a AWESOME sheath!! Love the carving!! Thanks for sharing!
ACE
-
That is nice work TyG. Very impressive, and a cool set up with your knife making friend. He does good work as well. Thanks for the pictures, JD
-
That's what i want to do on my first try.Can i use a sheath i already have that is blank?I have no problem with unstiching it and tooling then stiching back.Would have to bleach it(?) to get what little shine there is on it off.
If i go from scratch i have no idea of what thickness of leather to use.Is yours lined or just from one piece of leather.
Nice job on that :)
You could use the sheath you have but depending on the finish it has, you need to get water into it to tool it. I would use the sheath as a pattern for your new one, when you open it you will see the thickness of leather needed and also the method of construction for the new sheath.
Yes the sheath I built was lined, pigskin is good or any light split leather
-
Here is another Wall Plaque I just finished. This Holster was made out of a piece of scrap 5-6 oz. leather and dyed with Coffee dye. The holster was immersed in the Coffee dye for sixty hours. After drying, It received two coats of Neet's Foot Oil and two coats of Skidmore's. I still need to learn how to vary the overall appearance with the oil applications. I really like working with both the Coffee Dye and the Walnut dye. The dyeing process takes longer but I think one gets a more uniform appearance. It's also not as messy and it is more economical.
I'm going to put this Wall Plaque up for sale in my neighbor's Antique shop. We are both curious if there is any market out there for this sort of thing.
Again, special thanks go to Ten Wolves for his help, guidance and inspiration in using home brewed dyes.
-
Howdy Johnny ;D
You make me proud Pard, you did a dandy job on this, and your hand made wooden gun looks real as all get out, I'm sure some one is going to grab this one up, it has a lot going for it. WELL DONE ::) :o 8) :D ;D And as far as the dye, I was glad to help, they have become my first choice for a dye also, the colors are limitless. ::) ;D
Best Regards Pard
tEN wOLVES ;) :D ;D
-
Howdy Johnny
That came out great.
I think there should be a market for them. They sell the shadow box sets with a gun and badge and picture, etc.
WC
-
Just make sure the bullet is a blank! :D
Nice rig pard. Anyone would be right proud to hang that in their home.
-
That color is fantastic, JM. Very nice effect. Good work, pard.
-
G'Day Johnny,Real,real nice.Hey Ten Wolves your homemade dyes remind me of a pair of moccasins I made for my daughter way back when she was 5 or 6.I showed her all the hide that I had & asked what color? She said PINK,I said no pink,just brown,dark brown or tan.She said PINK,so I had a look & found some chrome tanned made her moccasins then soaked them in Beetroot juice over nite.She loved her PINK moccs.Feathers
-
Howdy Johnny, :)
Man that sure turned out nice :o I don't think you will have any trouble selling it!! That deep color makes it look like it has been around for years!! :)
Let us know if it gets sold!
Later
ACE
-
Johnny, the whole thing looks great. Hand made wooden guns, wow! How long does it take you to carve one of those? JD
-
Many thanks for the kind words Pards.
JD,
I'm guessing I have less than an hour's time in the wood pistol. The wood pistol is in the holster permanently so I only need to concentrate on the part of the pistol that shows. I saw the outline of the pistol and grip with a band saw. I then shape everything with my oscillating sander. After that I do the final finishing with sand paper and steel wool. What makes the pistol look decent is the genuine walnut grip. I've been learning how to carve grips and use my practice grips for the plaques.
I get rusty when I don't have any leather working projects going on. These Wall Plaques give me something to make. They also use up scrap leather and my practice grips.
-
Excellent, Johnny. Love the coffee color.
-
Just finished this purse for my Grand Daughter.
-
Really nice, Johnny. That white with the blue lacing looks really good together.
bodie
-
That looks great Johnny, and if the granddaughter likes it, thats' a bonus! Kids her age are notoriously hard to please. Fashion is such a big part of their lives at younger and younger ages these days. Very nice work. JD
-
Howdy Johnny
Great job on this purse, you and your apprentice did well, I know she will treasure it for ever.
tEN wOLVES ;) ;D
-
Howdy Johnny
Good lookin purse. Nice job on the Buckstitch.
WC
-
Very, very nice, Johnny. That's a quality item. Thanks for the pics.
-
Howdy Johnny, :)
Man O Man, that purse looks like one of those HIGH DOLLAR ONES that my wife is allways wanting to buy >:(
I guess I am going to have to start going shopping with her and take my camera, then when she is not looking, I will take a pic of it and the label, have you make them, and pay you for making them and we will both be smiling ;D
I have never figured out, why wowen have to have so many shoes and purses ??? ??? If I had as many guns as my wife does shoes, I wouldn't get anything done but wiping them down!
Great Job My Friend!!
ACE
-
Johnny, great work on the plaque and the purse. The holster really looks right with that gun in it. Ought to be able to sell a few to some of the cas guys.
-
Hi Guys as usuall there has been some great gear posted, well i havent posted for a wile so its about time i got some pics up from a few of my latest projects, Don
(http://i118.photobucket.com/albums/o112/Don101_photos/Sheath1.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/Sheath2.jpg)
(http://i118.photobucket.com/albums/o112/Don101_photos/BuffaloHunter45-70.jpg)
-
AWESOME Don, :) :)
Don't know which I like better, both are awesome, and spark me!
Thanks for sharing!
ACE
-
Nice looking Don, always a pleasure to see your work
tEN wOLVES ;) :D ;D
-
And another 1881 Holster
(http://i118.photobucket.com/albums/o112/Don101_photos/IndianWars1881Holster.jpg)
-
Very impressive, Don. I really like the aging on the second belt. Great look, very convincing. Skeet
-
the second belt i didnt make its a repro from elpaso saddlery manny years ago and the aging is from years of usage, iam considering makeing them in the future as there is more and more interest from reenactors to do the IW period, Don
-
Howdy Don
Nice work.
WC
-
Howdy Don,
Wow! That is some great looking work. Very impressive! Many thanks for sharing this with us.
-
Good looking work, Don. It would be hard to choose which one is best since they're all nice.
-
I wouldn't call myself a leather smith, but I do enjoy making my own patterns and rigs. Here are a few I've made.
-
Those look great, 3W. Well made and nice looking leather. Thanks for sharing those with us.
Welcome to the Leather Shop, pard. Looking forward to more of your work.
-
Good lookin work there Don, thanks for sharing the pictures. JD
-
Those look great, 3W. Well made and nice looking leather. Thanks for sharing those with us.
Welcome to the Leather Shop, pard. Looking forward to more of your work.
Thanks for the welcome, I'm glad I found it. It's great to see others work. I've got a lot of pages to look at......Great stuff!! ;D
TW
-
Howdy Triple W
Good lookin work.
WC
-
Howdy Triple W, :)
So you are not a leather smith ??? Now I am lost for sure :o :o i think your work is excellent!!! And I don't claim to be a very good leather smith, but I do fancy myself as one!!
i am very glad that you are here!! The Greatest Forum in the World!!
Thanks for sharing, and keep them coming.
Later
ACE
-
Howdy Triple W,
Welcome to the Leather Forum. By golly I'd call you a Leathersmith. Great looking work you have posted! Thank you for sharing.
-
Thanks for the kind words everyone, I guess I'll have to call myself a novice leather smith now that I think about it. ::)..Any who, Thanks again pards, I'll post um when I can.
TW ;D
-
Howdy Triple W,
Welcome to the Leather Shop, it's good to have you join in with us, that's a nice collection of your work, very well done, thanks for the look see. ::) :o 8)
Regards
tEN wOLVES :D ;D
-
Not a leathersmith huh? I don't know about that! Your stuff looks mighty good to me. Welcome, TW, and thanks for sharing. JD
-
All the good lookin' stuff around here lately! Quite the treat to pop back in and see it!
Whipped together a rifle sling yesterday for my new SKS. Double rivets up top, and stitched as well.
(http://forums.horsecity.com/uploads/1252134551/gallery_20846_1164_1539.jpg)
Hand sewn and hand buffed to a shine. The thread is four-core right hand twist wax-coated poly. Very heavy duty stuff. Probably overkill, as this was more or less just a mock up. Hence the oversized snaps, which were all I had at the time.
(http://forums.horsecity.com/uploads/1252134551/gallery_20846_1164_76289.jpg)
Sueded latigo keeper with a tab sewn in to make it easier to pull, but stay snug.
(http://forums.horsecity.com/uploads/1252134551/gallery_20846_1164_9883.jpg)
(http://forums.horsecity.com/uploads/1252134551/gallery_20846_1164_16271.jpg)
Pretty large snaps, but all I had at the time, LOL.
(http://forums.horsecity.com/uploads/1252134551/gallery_20846_1164_13565.jpg)
Enjoy!
-
Howdy RT, :)
That is one mighty fine looking gun strap! I think a lot of times we get caught up in trying to make something fancy that we forget the beauty in the neatest of the simple items we use!
Thanks for sharing.
ACE
please check out my vintage leather stamps in the for sale area.
-
Been making more modern gun leather, and there's less fancy involved in that. So the fit, finish, form and function really have to be what is beautiful about this stuff. A nice reminder.
-
Good looking work there RT. I'm looking to stitch a gun belt very soon, and I'm planning to stitch it after dyeing, because I want the thread to stay white, to match the holster I'm making the belt for. Does this sound like the right order of things? Thanks, JD
-
Yessir it does. ;D
-
Thank you sir!
-
Nice work as usual RT, that strap should work well for you. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Howdy Gents :D
I just finished a belt that I messed up on an order, I was thinking left handed as I am , and put ten bullet loops on the right side of the belt, so I had to make another belt for him, I went back to this belt a couple weeks ago and decided to put full bullet loops on the belt just to make it work right. I dyed the front of the belt in my walnut dye for 7 days, then put in my liner, the finish is just two coats of Neatsfoot Oil, and three coats of Skidmores Leather Cream, I let it sit for a few days and then buffed it up, the liner was finished with two good coats of Neatsfoot, and when dry, a couple light coats of Tan- Kote, followed by Skidmores, then buffed clean, the holster is a Cheyenne holster, for a 5 1/2" barrel Colt SAA or clone, the Ruger new model or old model also fits well which is what you see in it now, I originally made this holster for a Ruger Super Blackhawk 44 mag, after adjusting my template, a little I came up with this style, which has a deeper opening at the hammer, and a wider skirt.
Thanks for taking a look see
Regards
tEN wOLVES ;) ;D
-
Hers a few more pictures
-
here's a few more pictures
-
TW ... really like that ... that walnust dye gives a really nice mellow brown. I need to cook the walnut hulls I got from the tree in my pasture and make me up some of that.
I also love the border work there. Really nice stuff.
-
Howdy RT, :D
Thanks for kind words Pard, this walnut dye is so easy to use, I think I'm spoiled, I'm still using the same batch I made over two years ago, although I've added to it twice, I've got maybe 10 or 12 gal. in one container and about 3 gal. in another container, the largest one is big and deep enough to handle larger projects.
Thanks again for for taking a look see of my latest gun rig
Regards
tEN wOLVES :D ;D
-
!0 Wolves, I just came into the house to send you a PM regarding that stitching chisel, and here ya went and posted a real nice looking rig, and added another question. I don't want to clog up this thread, so there's a Pm commin your way. Thanks, JD
-
That's a very nice sling, RT. I like the color a lot. The double stitching is a nice touch.
TW, that rig looks good. Very good finish for that type of holster & belt. I like the walnut dye. I still have some of the pecan dye I made from Ace's pecans. I have some black walnut hulls to boil up next time I need some darker brown.
-
Howdy TW
That is a good lookin rig. I hope you know how proud you make me.
WC
-
Gone for a week, and all this great stuff. Knife sheaths, rifle slings, belts and holsters.
Dang you gents do fine work!
Love it all.
DM
-
Howdy Rt,
Great job on your Sling! That is a good looking finish with excellent workmanship.
Howdy TW,
Absolutely outstanding! A first class professional design with excellent workmanship! As good as it gets!
Thank you for sharing this with us Pards.
-
Howdy All :D
JD thanks for the kind words pard, got your pm.
Marshal Will, thanks pard, I think you will like the results the black walnuts give you, I find leaving my piece in the dye for at least 7 days gives me what I'm looking for.
WC, I can only say thanks for being my mentor, you opened a whole new world to me.
Dalton, thanks for your kind comments pard, it's much appreciated, and it's good to have you safely back from your vacation.
Johnny McCrae, thank you for your friendship and kind words, as you know these natural dyes are a kick to work with.
Best Regards
tEN wOLVES ;) :D ;D
-
Howdy TW, :)
Sorry about the late reply. That rig is AWESOME very out standing quality of workman ship!!!!!! I have had Jello for a Brain for the last 3 days or so, can't sleep can't seem to get anything done!! Still working on getting that right color for that rig I am making!
TW, I think it is time for you to have a web page!
keep up that great work!!
ACE
-
Marshal Will, thanks pard, I think you will like the results the black walnuts give you, I find leaving my piece in the dye for at least 7 days gives me what I'm looking for.
Thanks. I'm looking forward to trying it.
-
Thanks Ace
I appreciate you taking the time to look at my latest gun rig, some times a goof up can turn into something good after all. and thaks for the flowers. :D ;D
Best Regards Pal
tEN wOLVES ;) :D ;D
-
TW, I really like belts with bullet loops that run the whole length. Great job.
-
Thanks Santee ;D ;D
TW ;) :D ;D
-
My youngest son (39 years old) will be shooting his first match tomorrow. We will be sharing guns for this one but I wanted him to have his own leather. I had to make him a belt and one Holster. This Holster will fit my Richards Transition and my 1873 SAA's. This rig was dyed with Feibings Dark Brown oil dye and the belt is nothing fancy as I was pressed for time. The final finish is Skidmores. I did miss using my Walnut and Coffee Dyes.
His alias will be Charley McCrae as his middle name is Charles.
Now its off to the Reloading bench for more ammo.
-
Rock and Roll Johnny, :)
I think it is great that your son wants to do that with you!! I hope he falls in love with it and wants to spend a lot more time with you doing this Sport!
You did a Super Job getting him ready to shoot!! :o :o :o :o
Have a Super fun time, and be safe!
Later
ACE
-
Hello Johnny
I echo the words Ace used, this will be something your son won't forget, this is what memory's are made off, you did a dandy job on this gun rig, especially with such a short time to get it ready. ::) :o 8)
I hope you and your son Charley McCrae have a great weekend shooting ;) :D
Regards
tEN wOLVES ;) ;D
-
Great work Johnny M! And for a great cause too!
DM
-
Great job John, I hope you have a great time. JD
-
Howdy John
That is very cool that you get to shoot with your son.
Good lookin rig also.
WC
-
That's outstanding, Johnny. Your son will really enjoy that rig. I have fond memories of a custom holster a guy made for me. Your son will always remember that with joy.
-
Many thanks tor the kind words Pards.
Charley McCrae shot his first match today and he made me proud. He is already talking of someday introducing his son to this great sport.
By the way. you do know you are getting old when your youngest son has some gray in his beard.
-
Dang Johnny, your son looks right at home in his duds, looks like he'll be a natural, good to hear you both had a great day, by the way you have a good looking kid, and I know you're proud. :D
Regards
tEN wOLVES :D ;D
-
+1 ;D
-
Howdy Johnny, :)
I am so happy that your Son had a good time :) What a great feeling of pride you must have :) I would give anything in this world if my son and I did things toghter!
:) :) :) :) for you my friend!!!
ACE
-
Johnny, if that's your son, then you should look much older than you do. Either way, you have a right to be right proud pard!
So back to the new leather - .357 S&W custom holster, right hand draw, with a slight cant forward. The holster doesn't need it, but the slip strap is tightly snugged into the leather cross-piece, and does not pull out without some SERIOUS effort. Can be snugged behind the backstrap, or the hammer, then slipped over the front and pulled down out of the way when you need to.
(http://forums.horsecity.com/uploads/1252616163/gallery_20846_608_3988.jpg)
(http://forums.horsecity.com/uploads/1252616163/gallery_20846_608_19216.jpg)
Haven't got a really good pic of the custom embossing ... but I'll get one soon pards!
-
That's very slick RT. Nice work
-
hey there RT
thats one slick lookin rig hope if im ever on the business end of that one the guy has i snugged up good and tight so i have a bit of a head start LOL
Cowboy316
-
Howdy Rt,
Many thanks for the kind words.
That's a very nice job you did there on your .357 S & W Holster. A clean & neat design with excellent workmanship. Thank you for sharing it with us.
-
Howdy RT
That is a really nice holster, I like your stitch work, and your safety strap is very unique, looks like it fits your gun well. :D
Regards
tEN wOLVES ;) :D ;D
-
Charley McCrae shot his first match today and he made me proud. He is already talking of someday introducing his son to this great sport.
That's really great. How fun it has to be to share CAS with your son. Congrats. ;)
That holster is pretty cool, RT. Nice work. Thanks for sharing.
-
Howdy Rick, :)
SUPER HOLSTER, very nice lines and a very neatly made!!!
Thanks for sharing!
Later
ACE
-
(http://)
-
(http://)
One of these days Ill put my collection of The 7 knives and sheaths Chuck Burrows made for me and rigs ;D.I sent G@J Leathers a gator hide and he made me this one . Didnt want to sew it by hand.
-
(http://)
-
Wow, that's great! Every aspect of the rig; use of conchos, design, color, workmanship, even the photography. I take it you've been doing this a while. Thanks for sharing your work, JD
-
That's really nice! A lot of work there. Did you stamp the leather on the board thats behind the holster and belt? I like that border!
-
Ahhhh, stringray! That's stuff is hot right now! I've heard it's hard to cut??
-
Most of it I cut with a scissors . Some I had to cut with a tin snips.
-
I only started doing leather work 3 years ago in my garage. Just doing it for fun. Have a lot to learn. Never took a class or watched a c d but little by little I'll get the hang of it. Hand sewing is getting the best of me.
-
YOWZZZA :o SHHHWEEET!!
-
Well if ya need practice you can meke me one just for fun :D :D Very awsome stuff,man how do you all come up with thewm designs.. :-[
-
I am with JD on this one WOW is the correct term. If any aspect of the craft is whupping you I cant see it and that includes sewing. I'll bet you get more than a few fokes asking for a look see at the matches?
-
That is absolutely beautiful!!!! ;D
Ned
-
If these are your original designs, they indicate that you have the eye of a true artist. I have been playing with leather for over forty years, off and on, and do not have this sort of imagination. Keep it up pard for you show some true artistic talent.
-
Howdy Kid Terico
WOW is right, beautiful work pard, I can tell you put a lot of thought and heart into your work, it really shows, thanks for sharing, and letting us take a look see, keep them coming.
And welcome to the Leather Shop ;D
Regards
tEN wOLVES ;) :D ;D
-
Howdy Kid
I have to agree with Slowhand, you really have some talent, beautiful rig.
Regards
tEN wOLVES ;) :D ;D
-
Kid you're on a roll, Fantastic work pard thanks for the look see ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Thanks to al of you.
-
Howdy Kid
That is a good lookin rig. Keep up the nice work.
WC
-
Howdy Kid,
Beautiful!
Look forward to seeing more of your work. Many thanks for sharing this with us
-
Howdy Kid,
Beautiful!
Look forward to seeing more of your work. Many thanks for sharing this with us
-
Howdy KT, :)
That is a awesome rig!! great layout, nice border and well placed concohs. That is great work for only 3 years of leather working! I can only hope I am 1/2 that good when I have been doing it for 3 years!
Thanks for sharing!
ACE
-
Howdy Kid,
Beautiful! One is as pretty as the next!
Look forward to seeing more of your work. Many thanks for sharing this with us.
-
(http://)
-
(http://)
-
Howdy Kid, very nice pard, I'd say your hooked on leather, you have the FEVER, I can see why this would be one of your favorites, I love this old style too, the older it looks the better for me. I had to look twice, I thought it was one of Chuck Burrows rigs, Thanks for sharing :D
Regards
tEN wOLVES ;) :D ;D
-
It is one of Chucks rig. Thats why I said it was made by the MAN himself for me. Sorry for the misunderstanding. Thanks Kid Terico
-
Sorry Kid I guess I didn't catch that, Chuck does beautiful work, and you can just about pick out his work anywhere, he did you well with this rig, and sheath, you're lucky to have some of his pieces.
Regards
tEN wOLVES ;) :D ;D
-
Digging the grips, too!
-
That is so interesting. Really a masterpiece.
-
(http://)
-
Howdy Kid
That's a real fancy rig there, I know that took you some time to make, you have a very nice collection of rigs, the conchos on the bullet loops are different, is it hard to get the bullets in and out, did you use a rivet back and sink the rivet? I like all the conchos, I like using them too when I can, this rig has a real Hollywood look to it, Roy and Gene would have loved to have one like it. ::) 8)
Regards
tEN wOLVES ;) :D ;D
-
Hi tEN wOLVES, The belt and holster are lined on this rig as I do on all Hollywood rigs so setting the rivets is no problem since they are hidden. The loops on this rig are sewen rather than woven like I do on older style rigs. Once I have them sewn I take a pice of ss rod the size of the bullet the loop is ment for and next I wet the loops good and put the rod in each loop . Now I set my spots into the leather with ths rod still in place. It will crimp the spot at the same time recessing it into the wet leather to stop bulllet from catching. I let dry over nite with rod in each loop to keep the shape needed and then oil to get life back to the leather. Hope this helps. Kid Terico Thanks for lookings. I will post more of my collection as I go along. As I said before I do this as a hobbie for my self and family. I retired 11 years ago After 9 years of getting bored I thougt I would like to be a old cowboy. I started collecting from others but its not the same doing it your self. Started doing for kids, grandkids, wife ect. I recently sent a nice old rig to my granddaughter in the Marines in Japan. Driving her buddies nuts. Wish I would have started earlier in life 64 is a little late to start . So all u pards keep doing what makes u happy. What got me started was my { HERO} Chuck Burrows. He is a TRUE ARTIST. THANK U Chuck for all the rigs u have made for me. I have spent many a great hour looking at the items u were nice enough to make for me.
-
Thanks for the info. Kid, you did a nice job on the holster and belt as a whole, but that is the first time I've ever seen the use of spots right on the bullet loop itself, pretty nifty. ::) :o :D 8)
Regards
tEN wOLVES ;) :D ;D
-
Another beutiful rig there Kid T. You have quick a bit of dust invested in this rigs, what with the abundance of Conchos, not to metnion the labor. I'm sure whoever is on the receiving end of one of your rigs, gifting wise, feels truly blessed. Thanks for sharing the pictures, they are inspiring. JD
-
Thanks for the kind words J D. Its all family. I have previously said I have about 50 to 60 rigs hanging around the house. I have sold about 22 rigs over ebay in the last year but they wernt very good. They were from when I first started learning. BAD News ;D
-
(http://)
-
(http://)(http://)
-
Way nice,when ya get to the one i want,i tell ya where to send it ;D
-
Cool!! ;D
-
(http://)
-
Yea Kid , your hooked OK, keep them coming ::) :o 8)
TW ;D
-
very nice :)
-
(http://)
-
Sweet work there Kid T, sweet work.
-
Hey Kid, since you're making rigs for the family, are you interested in adoption :o
-
He's already been there a couple of times for me!
-
That's my brother for ya ;) ;D ;) he is good at everything.You still got my address brother???? ;D ;D
-
Ok if you insist,send me that one. :)
-
Family is growing fast.LOL :D
-
There's an old indian saying,"we are all related" ;D
Oh blats,bleen slobobering on my kleybloard agbaglin :P
-
Fancy.
Slim
-
Holy Smokes :o :o :o :o
K.T. That is a AWESOME rig!! Some people don't go nuts on the Hollywood Rigs but I realy like to look at Bling!!! You have to have a ton of hours in that rig! Lots of planning went into they layout of that rig! I like the way everything flows toghter on it!
Thanks for sharing!!
ACE
-
Thanks for the nice feed back.
-
(http://)
-
(http://)
-
I share Ace's feelings about the Hollywood rigs. I realize they're not everyone's cup of tea, though I'm sure everyone appreciates the workmanship.
I have a ton of questions, but I’ll hold it to two. If you don’t mind the inquiries, what kind of leather did you use to the line the holster with? It looks great.
Second, how did you apply the darker outline on that rig? Did you use a brush or spray it, or perhaps some other method? It’s really an exceptional feature.
Thanks very much. Still learning here, JD
-
J D I,m probley not the person to ask since I,m just a beginner my self but will try to help.All my leather is Wicket and Cragg. Standard best they have I usually line with 4-5 oz. Main leather is 7-8 oz. Unlined is 10oz. I tried something different on this. I used some 4oz. elk hide for the linning.. I mix all my own colors. Cant make 2 the same because I dont keep track of mixture. Alot of my 2 tone or 3 tone is straight oiling with no color added The rig with the darkened ends is put on with a 1/8 or 1/4 brush.KT
-
Kid, they are are really nice looking rigs. Some of them look like they might weigh as much as a good stock saddle ;) but they sure do look nice.
-
G B thats another one of my secrets. If I ever desideded to make a rig for sale I would have the market cornered. I would charge by the pound. ;D ;D ???
-
Durn, now see thats why I will never be rich ::) I would never have thought of charging by the pound ;D ;D
-
(http://)
-
Hey Kid, thanks for the response, I do appreciate it. JD
-
Howdy Kid Terico,
That's beautiful work you have been posting. Many thanks for sharing it with us.
-
(http://)couple bags I made
-
Howdy Kid
Those are beautiful bags Pard, I like the look and color, they have a classy look about them and the concho adds a little razz ma tas.
Thanks for sharing Pard
Regards
tEN wOLVES ;) :D ;D
-
KT,
Very AWESOME stuff!. I like how you have transfered some CB's style into your leather work!! Like TW said great color, and perfect design!
Thanks for sharing!
ACE
-
(http://) Something a little different. Bottom pict. is left side if belt.
-
Howdy Kid, :)
Man I wished I had 1/3 of your talent!! You sure make some AWESOME gear!! You have a very creative eye and I think that is what attracks me to your work!
Thanks so much for sharing!
Later
ACE
-
Lacing is something I haven't tried yet, I'm still trying to nail down good stitching! After seeing your lacing efforts, especially that lacing in the middle of the belt, I think I'm going to have to give it a try
-
JD dont be afraid to try. It is very easy to do.KT
-
Beautiful work KT, I like the lace work you did, and the silver knight, old Palidin would of really liked this one, and again the leather looks rich and supple, Thanks for sharing Pard
Regards
Rod Klomp ;) :D ;D
-
Wow, I take off for a few days and look at what I find when I get back. What a great welcome back. That's some beautiful stuff, Kid T. I don't know which one to compliment you on first so I'll just say that all of it is very, very nice work. Thanks for sharing with us. I'm looking forward to seeing more. Welcome to the forum, pard. As you have already seen, this is a great bunch to ride with.
Lessee, where shall I go next?.......... ;D
-
Thanks Marshall. Means a lot comming from u. I been a member for about 3 years but until now didnt have any rigs I wanted my name tied too. Still learning and everyones been so kind with there remarks.KT
-
(http://) Idea came from Packing Iron
-
(http://)
-
Howdy Kid, once again, outstanding work. On the holster you’ve pictured here, it appears the keeper runs through slots cut in the back flap. Is that correct? No matter how you did it, it looks great, but I’m wondering what the back looks like. Do you have the two ends of the strap butted up flush with each other, and how do you have it attached back there? I’ve seen keepers laced, stapled, riveted and screwed down. Thanks very much, your work is inspiring. JD
-
JD Theres a copper rivet on each end holding the loops and then I sewed the billet over it for a finished look.KT Sorry answered the wrong ? The strap is butted and laced. ???
-
Thanks Kid, that's what I wanted to know.
-
Howdy Kid
Well again you have brought out another beautiful piece of work, your belt and holster really do look like they just walked out of
"Packing Iron " spreading the bullet loops out this way also gave the belt better balance, and enabled the maker to dress up their belt with carving and as you too, adorning the belt loops with spots or conchos, this practice seemed to be quit popular in the period. You did a great job of creating and old style gun rig, Thanks for the look see ::) 8) :D
Regards
tEN wOLVES ;) :D ;D
-
That looks really nice, Kid. The design on the belt is pleasing with the bullet loops spread out like that. The holster carries the same look, too. Nice. Thanks for the pics.
-
(http://) Wifes south pa rig
-
Howdy Kid :D
No one can say that you don't think outside the box, you just keep them coming, and they're all beautiful, I'm glad you decided to ride the trail with us, after seeing your work, I'd feel bad if you hadn't posted all of these pieces, it's an eye full to say the least. ::) 8)
Keep them coming Pard
Regards
tEN wOLVES ;) :D ;D
-
tEN wOLVES Thank You. The silver dollar on the belt Is old. 47 years ago I had a jewler silver solder a small chain on it and I gave it to my wife as a gift. Couldnt afford much back then. Now I took it and put it on the back of one of her rigs. Her idea. With so many good leather artists on this site its hard to show items that are different. I have a spaghetti western rig that I want every one to look at it with one eye in case u go blind. Made it for my 21 year old daughter. :o KT
-
One more real sharp rig there Kid. That lacing (like on the brown belt in the picture) really fascinates me. Do you punch a double row of holes, then crisscross the laced back and forth between the holes? Very cool, and very different. Like 10 Wolves said, you sure do think outside the box, and that’s awesome. JD
-
Thanks JD, Its more like doing a figure 8 on each cross. Just enlarge the pic and u can see how I back track on every cross over. KT
-
(http://) Little fun remember 1 eye only
-
Kid,
All I can say is WOW!!! Each rig is different and great.
Old Top
-
Howdy Kid
You do some really nice work.
WC
-
Howdy Kid,
Kid,
All I can say is WOW!!! Each rig is different and great.
Old Top
Old top expressed my sentiments exactly!
Many thanks for sharing your talents with us.
-
Hey Kid, you must really like lacing ;D All your rigs are top drawer and are giving the rest of us some really good ideas. we appreciate you taking the time to show them off.
-
Howdy Kid,
I have to agree with the rest of the gang on what has been said :o :o :o :o Totaly AWESOME!!!!!!! I would of liked to off seen the bottom rig you just posted, but when I go to open it only opens about 1/4th??? ???
Great Stuff, keep it coming!!
Later
ACE
-
ACE what does rhe rig look like? KT
-
(http://) I see I didnt post all of this rig. Sorry
-
Kid, I think you are the "King of Cowboy Bling" with all that fancy work. Thanks for sharing, and I agree with GB, you're giving us some good ideas. Thanks, JD
-
JD ,remember I,m not responceable if u go blind. ;D ;D
-
Howdy Kid,
It was the two toned rig, might be Black and white? I sure like your stuff!! Sorry for being a pain, I just hate it when something I want to look at won't download for me!
Thanks
ACE
-
Ace, it should download . Its works for me. Its 3 layers of leather. Back linning is7-8 oz. The lite color is very very lite tan. It is Elk. The top scalloped is 3-4 oz blk leather. It is one full piece of leather made to the exact measurements of the back linning. It took a lot of work to get it to fit perfect.KT
-
(http://) Ace try down loading this one. KT
-
KT,
I did get the first one downloaded! It is AWESOME!!!!! :o :o :o :o I can't imagine the time and money you have in that rig!! I realy like making the Hollywood Rigs, but I just can't afford to make them and have them sitting around! Up untill this year I could garage sale and buy guns and reloading stuff and make my play money!! This year was a no go!! No Doctor, No Pain pills, No money!! But things have to turn around sometime (I hope)!! I realy like your work! You are very talented!! And I thank you for showing those AWESOME rigs!!
I cut out the Holsters for a Hollywood Rig that is going out west, I have been working on getting the right color for 2 weeks! I have allways used 100% 1800's dyes! I have never used the store bought ones. I have seen Pards that use those, and they tend to look streaky!! If my customer picks one of those, I am going to get out the Snap On HVLP spray gun, and I know I won't have any streaks!! I feel that if he picks one of those dyes, I also need to wioe down all the leather with Lemon Juice, hopeing to prevent any blocks!
Thanks so much for sharing those AWESOME Rigs, and keep them coming!
Later
ACE
-
(http://) I designed this rig and G@j put it together for me. Knives were made for me by the MAN CB KT
-
(http://) copied after a Croft rig
-
Very Nice KT!!
Later
ACE
-
Howdy KT,
Well I think I have to echo what the others have said about your work, when you said you had 40 to 50 gun rigs in the house, I knew we were in for good show, and you haven't let us down yet, beautiful work KT, Thanks for sharing with all of us. ;) :D
Regards
tEN wOLVES ;) :D ;D
-
(http://)More of my collection
-
Well Kid, I think it's time you fessed up :o Just how many rigs do you have around the bunckhouse?
-
At any given time 40 on the lite side. Maybe 50. I keep makeing them and when I come up with a new idea I like better I get rid of the old ones.I,m making a gator and sting ray now . Will be done next week. KT
-
(http://) Holsters is all I collect. Got carried away but its fun. Lucky I didnt start 20 years ago or we might have run out of cows. ;) ;D
-
(http://)
-
Kid, I think you are the "King of Cowboy Bling" with all that fancy work.
I couldn't have said it better. Nice work, pard. You really do each one with a different look and they all work. Thanks.
-
Howdy Kid,
Your Holster rigs are beautiful! Great design's coupled with excellent workmanship. A genuine pleasure to look at. Many thanks for sharing this with us.
-
(http://)
-
(http://) The knife and sheath were made by the MAN. Chuck B. For me. KT
-
(http://)
-
Howdy Kid Terico
Well Kid I'm never disappointed when you post new pieces, beautiful work Pard, you have a good sense of design, and are very creative to say the least, some of the things you have posted , look to be in the footsteps of Chuck Burrows, and you can never go wrong there, I owe a lot to Chuck for all I've learned just from him. Well done Pard, keep them coming, and thanks for sharing your work with us. ::) :D
Regards
tEN wOLVES ;) :D ;D
-
TW Some ideas are Chucks and a lot of Packin Iron. I look at a lot of old picts to get ideas. If anyone wants a Chuck B rig all I can say is to buy one of his. No one can copy his work. His dying, leather ageing and lay out is in a world by it self. He is the BEST. All the rest of us can do is try and have fun. KT With luck some day I hope to meet him.
-
Some ideas are Chucks and a lot of Packinf Iron.
Kid you can't go wrong with either one, two great sources of information and history, my Granddad had a money belt just like one of the belts in Packing Iron, that book brings back memories for me.
tEN wOLVES ;) ;D ;D Darn near couldn't finish this, our cat laid down on my mouse, she'll keep bugging me until I give her a treat, my mouse is covered up right now
-
TW what a excuse, I,ll have to try that the next time the wife wants me to take the garbage out. ;D KT
-
(http://)
Okay, now THOSE conchos on the top strap of the holsters are what I've been looking for. (Your first post today, top picture.) My source out here vanished and I need to know where to get more.
Thanks.
-
More niced work, Kid. I really like the rig in the pic with the very cool knife & sheath. It looks really good.
-
Forty Rod , are you asking about the slotted conchos? KT
-
KT, I got your email. Thanks. Just what I was looking for.
-
(http://) Another one Chuck made for me. And sort of a neat rig I put together.
-
(http://) Grips are sort of nice.
-
gator
-
(http://)
-
Hey Kid, thanks for sharing more great rigs with us. Is that tan color coming from the leather, or is it dyed? ? Either way it looks great. Where do you get your leather? Thanks, JD
-
JD just coats of oil. Get standard from Wickett@ Craig. Its the bestl they sell.base I only buy russet and at times I will ad oil base dyes to do blk or darker browns. I never use straight dyes. Mostly oil with a tint of dye. I use 4-5 oz for linning and when doing inlaid. &-8 oz on outside and10-12 oz on unlined rigs. Useing oil works well. The more u rub it the darker it gets and u can shade it nicely. Takes a lot of time and is hard on the fingers, but at my age what else do I have to do. :P KT PS all my leather is skirting. , You can probley guess I will run out of ideas before I run out of leather. Now the hardest thing is trying to make rigs that dont look alike. Often when i get done I get rid of it for next to nothing because it looks to much like one I have.
,
-
Thanks for that answer KT. I have a Tandy store locally, and Oregon Leather, which stocks Herman Oak. I know Chuck B recommends Wickett and Craig, so I guess I'm going to have to give that a try.
I don't know a whole lot about leather, but I thought skirting had something to do with the weight of the leather. I just looked at the Wickett & Craig web site, but I'm still not clear if Russet is dyed leather or not.
Can you tell me why you use skirting instead of their tooling/holster leather? Do you know what the difference is?
So, to build holsters and gun belts, you use the Russet skirting in 8-10oz ? Where do you get the lighter weight for lining? It looks like they will split it for you, is that what you do?
Thanks KT, like so many others on this forum, you've been a big help to a new guy, JD. PS, I'm not far behind you at 60!
-
Hi JD They will split it for you . I use 7-8 oz only when lining it with 4-5 oz.otherwise I use a heaver grade for non lined rigs. Give them a call and they will send u a stack of samples in different colors, skirting,belting,harness, bridle and diffferent weights so u can see what your buying.I like working with skirting. Try it , so will u. KT 1 800 826 6379 ext 222 Glen
-
Thanks KT, I'll give them a call. JD
-
(http://) Couple fancy rigs
-
More cool stuff, Kid. I find that braided rosette very nice. Thanks.
-
(http://) my elk skins
-
(http://)
-
(http://)
-
(http://)
-
Very nice Kid Terico
Good looking rig, and nice style,your placement of spots is a nice touch also, thanks for the look see
Regards
tEN wOLVES ;) :D
-
Howdy Kid,
Awesome rigs you have been posting! Thank you for sharing your beautiful collection with us.
-
Those are some fine rigs, Kid. I'm with Tw on the spot placement. Nice work.
I think we need a picture of you wearing all of them at the same time. ;D It would probably be some kind of record.
-
One would cover me. I,m a runt. 5'-3" 155lbs
-
(http://)
-
(http://)
-
Howdy Kid
great lookin stuff you keep up the great work
Cowboy316
-
(http://)
-
(http://)
-
More good rigs, Kid. Nice work. Thanks.
-
::) More nice work Kid, keep them coming Pard ;D
Regards
tEN wOLVES ;) :D ;D
-
Some new stuff.....
(http://www.wrtcleather.com/1-ckd/1-2009/holster-tejano-09-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/knifesheath-frontier-cales.jpg)
-
and a complete rig........
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-walton-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-walton-3.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-walton-4.jpg)
-
Howdy Chuck
i dont have the words to explain the beauty of you work im just in awwwwwwww ove your work its always a pleasureso look at your work
keep up the beautiful work
Cowboy316
-
(http://) Last inlaid I,ve made. Little more fancy than the rest.
-
(http://)
-
Chuck as usual OUTSTANDING. When u look close I did find a problem with it. You didnt make it fot me. :-\ >:( ;) Thanks for showing .Your a true artist KT
-
Howdy Kid Terico
Slick looking rig pard, like your inlays, nice design all around, and that WG buckle puts the finishing touch on it, thanks for the look see.
Regards
tEN wOLVES ;) :D ;D
-
TW if u look close a the buckle you will see I had it chromed for this rig , other wise it didnt match. He has great buckles but not in chrome. KT
-
KT,
I thought you might have polished out the white bronze, it does look nice chromed, you know WG, also does these in Silver, one of the pards here polished out one of the white bronze ones and WOW it came out looking great, almost like like silver. anyway yours looks great, thanks for the look see.
tEN wOLVES ;) :D ;D
-
TW Thanks for the info. I have about 6 more of his buckles. I,ll have to try that. KT
-
Wow, Chuck. More of your outstanding work. I really like the knife & sheath. Also, the half skirt holster looks almost like it was made by H. Keller. Thanks for the pics.
-
Nice work Chuck, not bad on the photo dept. either, it's always a pleasure to see your work, thanks for the look see ::) :D
Regards
tEN wOLVES ;) :D ;D
-
Chuck & TK
2 thumbs up.
WC
-
Very nice inlay, Kid. I like the grey and black with the white accent. Good work.
-
Thanks to all of you. KT
-
Sorry to you guys, for not repling earlier, but CB,and KT, AWESOME!!!! The Back has kept me a little silent! I know that is hard to believe, but it is true!! Both you guys, those are out standing rigs!! I have a lot of stuff I would like to make, but don't know if I will get to! Looks like early cool temps arn't good for me, so I am going to have to rethink my plans. KT and I have been working on a couple of inlay rigs, and thaks KT!!
I figured that I would be indoors most of the winter, but had hoped to be able to play a little longer than I have! Got to finish the big rig and it has to be the best I have ever done!
Sorry that was talking out of place!!
CB, I am allways impressed with you gear, your style is like no other!! KT, you also have a very diffent style of your own!! I commind both of you on your Talents!! I greatly appreciate the fact that you pards share your work, (and that is to all pards on the forum) the inspiration that every one puts into this forum is AWESOME!! With out this forum, I wouldn't be doing leather work, and i love doing it!!
Keep all the leather work coming!!
AWESOME STUFF!!!
ACE
-
Hi Ace good to hear from u. The remark about the rig your working being the best u ever did. is the way to think. Thats what makes us better and gives us something to work toward. Lets hope u start feeling better. KT
-
Well, after all the cool holsters from Kid Terico and Chuck Burrows, I hesitate to post anything, but here goes. These are holsters number 7 & 8 for me. The sewing is coming along, hand sewn.
I have several other holsters in various stages of completion, and these are not entirely done. I still need to apply some Gum Trag to the inside-backside areas, but I assembled them to take them to church to share with my shootin buds, along with my new Arkansas toothpick.
These are a slight modification of one of Slowhand Bob’s patterns (Thanks for all your efforts Bob). I’m going to make the next set a little bigger, and probably do some carving. I’ve also got some cut out using a modified version of Will Ghormley’s Cattleman holster.
Thanks for looking guys, JD
(http://i165.photobucket.com/albums/u51/HarleyPastor/Oct09holsters.jpg)
-
JD With out even being finished I can tell u they are some beautiful holsters. They have a great shape and I love the color. Most of my rigs are all hand sewen. I dont even use a awl. I would be PROUD to wear a rig like that and u should be too.What type belt u making for them? Please show when finished . Show more of your work.. KT Also knife doesnt look very good with those holsters.. Why dont u send it to me. I bet if I try I can find a rig it will go with. ;D ;D ;D ???
-
JD, JOB WELL DONE PARD, you did a bang up job on these holsters, I like your choice of border tooling, I might use this combination my ownself if you wouldn't mind, it shows good taste, just the right amount of tooling, and the rosette, is very unique and shows style, excellent choice of stamping tools, and the color is beautiful, it looks rich and antique, your sewing is right on and looks good, one thing I might suggest is at the top of your bucket at the seam line, instead of going across with your stitching, go off to the side like a^ but not quit this angle, usually about 1/4" away from the main seam, this will strengthen your seam line, going at a 90 degree across allows too much stress on the last stitch, I like to sew starting at the last stitch on the main seam, down ^ about a 1/4" away from the main seam, and about 1/2" long, this stitch line will reinforce your seam line at the top of the bucket where the stress is, you can think about trying this on you next holster, Slowhand Bobs pattern worked out great, and like KT said will look good in a new gun belt, Thanks for sharing Pard, you did good. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Thanks 10 Wolves, I noticed that line, and what other people were doing After I'd done the stitching line. The next ones will reflect that angle.
KT, I'm going to start on the belt early this week, and I will most likely design it after the pattern on the holsters. It will be unlined, and I'll try to get as close to the color other the holsters as possible. I don't know what they call the style of belt I'm going to do, but it's not a ranger belt, just cut down on each end with a buckle. It's the type of belt you see on Long Hunter rigs.
I've got a guitar strap I've got to work on, and a few other things I've promised. Chen Geer is coming to Portland, and I'm taking the classes he's offering, from this coming Thursday through Sunday.
-
JD, you are being to modest those are beautiful holsters and you matched the color perfectly. You know by now that I am a sucker for simple and classy and you nailed it with those two. I am sure that the belt will look just as good. Can't wait to see it
GB
-
JD those holsters are really great. I love the color. The stamping is simple, understated and quite appealing. I think they are fantastic and can't wait to see them teamed with the matching belt.
bodie
-
You guys are way too kind. Blind, but way too kind ::)
Of couse I see every flaw, and vow to do a better job on the next set.
-
The Kennedy rig is very nice, Kid. Thanks for the pics. Having enough of them is subjective and lasts a few days, at best. ;D
JD, those hosters look really nice. The border is very balanced and appropriate for the style and look. Nice work. Flaws? Naw. Remember, we see the good stuff and the maker sees the rest. Very nice, for sure.
-
Howdy JD,
Those Holsters are AWESOME!! I have to agree with the rest of the gang, the color and the stamping is just great!! I don't know how anyone could of done them any better!! I can't wait to see the finished rig!!
Later
ACE
-
Good job JD! I think your stitching looks good! On occasion, I still do the top of the holster like you did, to help reinforce a welt if I put one in. I will usually come down a little as well, so that it is 3 sides of a square, instead of just 2 like you did. I dont do it very often, and dont even think I have any around right now to show a pic of.
GOod job tho!
DM
-
Howdy Kid,
More outstanding work from your workshop! Thanks for sharing this with us.
Howdy JD,
You did a beautiful job on your holsters! Everything about them is first class! We are all very proud of you.
-
G'Day JD,Your holsters turned out mighty fine,as a newbie as well I really enjoy seeing the projects & picking up a few tricks.One tip I picked up from a leatherworker here is before I do my edging,I run over the flesh side with a disposable razor,gets rid of all the fuzzies.Feathers.
-
(http://)
-
(http://)
-
Thanks Feathers, I'll have to give that a try. Slowhand Bob talked about using a foam sanding sponge, and I have a couple of those (real common in the states) It really works well.
Kid Terico, thanks for the phone call today. It was great getting to know you, and I appreciate all the good tips. JD
You slipped that last one in while I was writing this. What do you call that style of belt, besides a normal cowboy belt. I tried to find a name for it, because it's the style I'm using for the holsters I just posted. Thanks. Great looking "Spaghetti" rig, must be rich Italians ;D
-
Same here JD. Keep up the good work.The name for a belt like that is ridiculous. ;D ;D I know yours will be a lot nicer if u match the holsters. KT
-
Howdy KT,
That is just another AWESOME rig!! That is one of the great things about leather, you can make any style you want!!!!
Keep those AWESOME rigs coming!
Later
ACE
-
Hi Ace your package went out today . You should get it in 2-3 days. Thanks for every thing. KT
-
Howdy KT
That rig is Dynamite, I can just see some bad guy wearing it, those conchos are wild and really look good, you might even call this a BBQ rig, it just looks great . Thanks for the look see.
Regards
tEN wOLVES ;) :D ;D
-
Thanks to all of u. KT
-
That rig is really interesting, Kid. More nice work. I really like that eagle with the four feather border. That's outstanding work. The dark background really sets it off. Thanks for the pics.
-
Well, after all the cool holsters from Kid Terico and Chuck Burrows, I hesitate to post anything
JD - IMO NEVER feel that way - we are all on the journey together and as that old ARMY commercial said "Be allll YOU can be!"
As for your holster you did a fine job - I especially like the color - two thumbs way up!
1) Seam reinforcement - as and alternative to TW's suggestiion - when doing seams I start four holes down sew up and then back down, effectively backstitching the beginning of the stitch line
2) Did you groove the line? If so I;d suggest to go a bit deeper if not do a groove which helps "set" the stitch line.
3) After stitching lightly dampne the leather and then go over the sitches with your over stitch wheel - thei will also set the stitch line and even it out
4) The only other suggestion is to add a decorative line about an 1/8-3/16" inside the stitch line - look at most of my work and you can see what I mean. It's traditional for one and adds a bit of visual impact - use the stitch groover or a set of calipers to make the line.....
FWIW - Kid T and I talk frequently so he knows what I think of his work.
For the other folks - again two thumbs up and keep it up! ;D
-
Part two - first glad ya'll enjoyed the look see at the cowboy gear and thanks!
Noe for some Indian gear......a bear jawbone knife and sheath....
(http://www.wrtcleather.com/1-ckd/1-2009/WildGoo-018-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/WildGoo-018-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/WildGoo-018-3.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/WildGoo-018-4.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/WildGoo-018-5.jpg)
now back to the proverbial grindstone....... ;D ;) ;D
-
Thanks for that advice Chuck. The funny, dumb, call it what you will thing is I knew that stuff from watching your holster DVD numerous times. I doubled back on the stitching on both ends, but probably did not get the stitch groove deep enough, and I remember the rest of the advice, but after the fact. I will write this stuff down, and try to follow it like a recipie.
You last post's work is incredible, very inspirational. Thanks
-
(http://)Pict. of complete rig.
-
Howdy KT,
I love all different types of rigs, and that is a True B Movie Holster!!! Realy looks great!
Later
ACE
-
Beautiful work Chuck, you just seem to get better and better with time, the bead work alone is just awesome, thanks for sharing Pard.
KT, another fancy gun rig, those Hollywood pards wouldn't know how to act with one of these rigs on, you're definitely the King of Bling.
Thanks to both of you for sharing
Regards
tEN wOLVES ;) ;D
-
Howdy All
Here's a couple of pieces I just finished for a Pard, it's a holster for a S&W Lemon Squeezer, and a matching sheath for his dagger, the knife is his, and gun is mine, hope you like it.
Regards
tEN wOLVES ;) :D ;D
-
(http://) TW its about time you show some of your work. Now thats a VERY nice sheath and holster. I really like the color. Great stamp design on holster. Thanks for letting us see. There sure are a lot of great leather workers on this site and your one of them KT
-
Howdy TW,
AWESOME :o :o :o :o very nice design, and a very beatifull color, AWESOME Roseettes!!!!
Thanks for sharing Pard!!
Later
ACE
-
That knife and sheath is great. I like the combination of floral and geometric beadwork. Beautiful.
Kid, that rig looks good with the two-tone finish. TW's right, king of bling. Well done.
Tw, Those look great together. Nice simple design carried out to make a nice set. The FJ floral stamps look really fine on both. Nice work.
Thanks for sharing, pards. That's what keeps us going around here.
-
CB, TW, and KT, great looking rigs. You guys are the reason I keep trying. I mean even a blind dog will find a bone once in a while so I keep stumbling along hoping my next project will be the one. Thanks for showing use your work and keeping use inspired.
-
Hi GB, dont go knocking your work. Everyones work is good on this site, only we all approach it different and have a different style..Thats what makes it interesting. :) KT
-
You are right Kid, The different styles and ways of doing things are what keeps use all looking. It seems like we all pickup little bits and pieces of everything we see and that is where our own style eventually comes from. Some just get there faster than others.
-
Here's the belt for the holsters I recently made.
(http://i165.photobucket.com/albums/u51/HarleyPastor/Oct709holsterbelt2.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Oct709holsterbelt1.jpg)
-
JD now thats what I call first class. VERY NICE. Sorry JD the reply was not supposed to be with this pict. KT
-
(http://)
-
Howdy Gents
I'd like to thank Kid Terico,Ace, Marshal Will, and Gun Butcher, for your kind remarks, GB, you have a lot of heart, and that will get you where you want to go, just hang in there, what's nice about sharing is we can all get fresh ideas, every one has a different style and thoughts as to design and color and finish, just another reason why I like working with leather.
Thanks Pards
tEN wOLVES ;) :D ;D
Howdy JD
Well pard, your rig is beautiful, you've done a great job on your stamping and finish, love the color, JD you can be very proud of your work pard, thanks for the look see, keep it up, you're getting better with every piece you post. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
JD, that rig is downright beyootiful! The color is great and the holsters and belt are just right. That is a good style and you should right nice wearing it.
bodie
-
Howdy JD,
AWESOME, AWESOME, :o :o :o :o Holy Smokes Pard, that is totaly a outstanding rig!! After looking at that, I have to ask my self, If I have wasted my time ::) No I don't feel that I way, I am proud to be a member of this great forum, where all of us put our pants on the same way, and share and help others!!
You my friend have went over the top!! You can hang your head HIGH for that rig is AWESOME, the design, the lines, and your stamping is out of this world!! I can't wait to see some new work, after you have taken classes!!!!!!
Thanks for sharing, and as soon as you get back from school, please give us a up date on how you think the class will help you!!
Later
ACE
-
JD, now you've done it. we are all going to start asking you the questions from now on.
First rate rig Pard, you have done yourself proud. The look, the color, and the execution are great.
-
Howdy Kid Terico
Beautiful work again, that is a really cool looking holster and sheath, I everything about it, real period look to it, and you your table top is awesome, your quit a hand at carving yourself, this really came out nice, carving is still something I need too sharpen my skills on, and I sure appreciate others skills when it comes to the beautiful carving you pards do.
Thanks for sharing all your pieces with us, I know every one looks forward to your next post. ::)
Regards
tEN wOLVES ;) :D ;D
-
Howdy KT,
I just took the time to look at that last rig you posted, it is way cool!!! I love the way to laid out the spots! Are those spots on the holster or are they a small concho? They realy set it off!! Makes the whole rig come togther!! I love all the news rigs coming on here, sure makes a person think outside the box!! Thanks again for the inlay hides, I want to get the Big Rig done, so I can start drawing up my first inlay!!
Keep them Coming Pards!!
Later
ACE
-
Thanks for everything guys. Ace those are small lead conchos from Buffalo Bros. They are rivet back. KT
-
JD, that belt really looks good. It makes a good rig with those holsters. Nice work.
Kid, more cool examples of your work. That framed cowboy looks very good. The horse is well done, you can almost hear it snort as it pulls it's head up.
-
howdy Pards here is some of my newest work the knife sheath is for the bowie knife i trade a chunk of antler for and this is the sheath i came up with and the little holster is for a Smith & Wessson 2 1/2 inch snub nose and the last holster is for a .45 semi auto
enjoys pards and thanks for all the support
Cowboy316
-
Howdy C316
I was wondering where you disappeared to, guess you've been busy, it was worth it, these pieces are beautiful, well done Pard, and thanks for sharing. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Heh Cowboy. Nice pieces of art work. U sure do some nice carving. I really like the small holster. Very compact and great color. My type of rig. Thanks for showing. Gives us more good ideas Thanks KT
-
Cowboy 316 & Kid T, nice work!
Thanks for the kind comments gents
Tomorrow is Chan Geer!
-
Howdy Everyone,
Been travelin' a bit and have not access to my home computer for the last five days. It's always a genuine pleasure to come back and view the beautiful Leather Work posted recently. My compliments to everyone for the great job you are all doing. I'm proud of you all and happy to be a part of this forum.
-
Hey Cowboy, good lookin' work . I really like that small holster. The pattern fits it to a tee,almost like you planned it ::)
-
Hey Cowboy, Was that a shot from GB? KT ;D ;D
-
LOL
-
Those really look good, Cowboy. The tooling on the holsters is really fine. I particularly like the wild rose pattern on the 1911 holster. Darn good work.
-
This morning I went back and took a closer look at K.T. and Cowboy 316’s work. I was sort of on the fly yesterday.
Terry, that carving is downright exceptional! I agree with Marshall Will, you can almost hear that horse snort. That kind of carving must take quite some time developing your natural skills. You have a great eye for detail.
Cowboy 316, once again I must agree with the Marshall, I really like the Wild Rose pattern and carving on that Wild Bunch holster. The other work looks good too. I still remember the first holster you posted, and man oh man have you come “A right smart piece” as my grandmother would say.
Thanks guys for sharing your inspiring work. JD
-
CB316,
I will agree with the other pards, great work!! Keep them coming!
Later
ACE
-
well thank you pards for the kind words and yes i know my work is few right now but im still workin on them still having camera problems but i manage to get pics taken but im alway here to put in my 2 cents worth and help out in any way i can your a great bunch of pareds to ride trail with
thanks for the support
Cowboy316
-
Another one bites the dust - this one is heavily aged (doesn't quite show in the pics) including a couple of rawhide "repairs"......
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-sickey-09-2-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-sickey-09-2-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-sickey-09-2-3.jpg)
-
Howdy chuck,
Always a genuine pleasure to view your works of art! Thank you for sharing your talents with us.
-
Wow Chuck, that's awesome! What's the orgins of that buckle? Way cool.
-
Well done CB, I like that patch, that really aged it, very nicely done,you have this aging thing down to a science, thanks for sharing.
Regards
tEN wOLVES ;) :D ;D
-
Wow, Chuck. You out did yourself this time. Those "repairs" really make it look great. Very nice.
-
Chuck, looking good as usual. KT
-
(http://)
-
Very nice, Kid. That laced edge really looks great. I like the color contrast, too. Very nice.
-
Howdy KT,
Another great looking rig, nice lacing, and color, those jock strap holsters have some nice lines, your carving looks good too.
Thanks for sharing Pard
Regards
tEN wOLVES ;) :D ;D
-
Howdy KT, :)
I have to agree with MW and TW, very nicely done! I would like to see some more pics of that rig!! Looking at the constuction of it, it looks as if a man was wearing that rig, he would never wear it out!! I am not much on the laceing, but that laceing is AWESOME!! That just might inspire me to lace my next rig!!
Thanks for sharing that very AWESOME rig!!
I will be looking forward to seeing more pic's!
Later
ACE
-
Howdy Gents
With Kid Terico down right now I didn't feel much like posting my latest work, But I figured he would want me too, so Kid this posting is for you, but you have to let me know what you think, and you have to get back with us real soon.
This is a Law Dog style holster with miner changes, it was left in my natural walnut dye for seven and a half days, the holster is lined, and hand sewed, the finish is Neatsfoot oil and then Skidmores Leather Cream, I got some nice color with this hide, which I was happy about, I installed a belt lock and hammer thong, and a holster to skirt tie down, the holster is very secured to the belt and won't ride up or change position.the main stamping was done with a tri-weave stamp, and then a small border stamp to accent. The slotted concho was added to the loop on the holster, and I used a bleed knot for the first time to secure it.
Thanks for taking a look
tEN wOLVES ;) :D ;D
-
more pictures
-
I'm glad you posted these pics, TW. It's a very nice rig. I haven't used a tri-weave stamp but that looks good. If course, if I HAD a tri-weave stamp, I may be more tempted to use it. ;D It's a nice effect. The bleed knot is nicly done, it really adds to the holster. The color is really nice, too. I like the tone it came out. Thanks for the pics.
-
TW keep up the tridition. Wouldnt have any other . Your work is out standing . Great set of holsters and belt.Is this the rig you promised me before I got sick? :o :P :PThanks for. Your a true friend. Terry
-
10 Wolves, I LOVE this holster-belt rig! I was just staring at the Law Dog pattern at Tandy today. It's been out of stock for quite a while, and I flip flopped about buying it, but I spent too much on Barry King tools, so it will have to wait. Chan was offering 20% off Barry’s tools, with no shipping to contend with; too good a deal to pass up.
I’ve read questions concerning how stamping holds up to moisture when wet molding. After looking at your stamping I don’t think that should be a concern, unless you dyed the leather before you stamped and sewed it.
You’ve got great attention to detail, and the bleed knot is first rate. I’m practicing those, and hope to use one soon.
All the way around a great job. Thanks for sharing such great pictures and details.
-
Howdy All
Thanks pards, your comments are appreciated, Marshal Will, those tri-weaves come in two sizes, and they're not to hard to work with, give it a TRI, LOL
Kid, it's good to see you're still just as ornery, as before, we can talk about that rig, only I know what you do with other folks leather, scars the bejebers out of me, listen take care of yourself Pard, and do what they tell you, and you'll be back in your shop in no time. Thanks for the kind words Kid.
JD, good to hear you're enjoying that class, getting 20% off on BK tools is a bargain, and no S&H, you can't beat that,
I do all my sewing tooling /stamping and edge beveling before I put my gun leather in my natural dyes, then after the amount of days I'm dyeing, I'll take it and do any wet molding that needs to be done, then I let my leather thoroughly dry, after it is compleatly dry, all my tooling/stamping is set,then it's time to do my burnishing, then I do the conditioning and finishing, but the tooling /stamping all holds great, and doesn't fade away.
This was the first time I used the bleed knot, and it was fun, and I like the look, give it a try, I think you'll like it too. I like this Law Dog Design, and I'm glad I picked it up.
Thanks for the flowers Pards
Best Regards
tEN wOLVES ;) :D ;D
-
Great looking rig, 10 wolves.Very nice tooling and everything else.Dave :)
-
Every now and then I get a call for something out of the ordinary.I think this one qualifies.It's for twin 1911's.The three main belt is lined with suede and the holsters and mag pouches are lined and laced.It's certainly not subtle.Dave :)
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/chad5.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/chad2.jpg)
-
Dave,
That is something out of the ordinary, and appropiate for the end of the month. ;D ;D ;D
Old Top
-
Beautiful, TW, and a heck of a lot of sewing. Skeet
-
Dave, bein a preacher, that's not my style, but I sure can appreciate the quality of the workmanship and design. Nice work.
-
Howdy Dave,
Thanks for the kind words Pards, it's much appreciated, making gun leather seems to be my thing theses days, that holster you made is real sharp, and would have a lot of appeal to certain crowds out there, you did a great job on design and putting it together.
Regards
tEN wOLVES ;) :D ;D
Howdy Skeeter
Thanks for the flowers Pard, I'm glad you liked it, and you're right , it took bo-coo time to sew, but I don't mine doing it, sewing is something I used to dread, but after you've done enough of it, it doesn't seem so bad, and is kind of relaxing, I use a sewing mule that Ace Lunger made me a couple years ago, and that really takes the stress out of it.
Thanks for taking a look
Regards
tEN wOLVES
-
TW Your rig is awesome ,dont knock it. Dave I like your work .Really different. Is your Boot Hill Rig? :D ??? KT
-
Howdy TW,
Another beautiful piece of Leather Work from your workshop. Many thanks for sharing your talents and expertise with us. Your help on this forum is greatly appreciated.
Howdy Dave,
That is a cool looking rig. Neat design and excellent workmanship. Thanks for sharing this with us.
-
Very good workmanship, Dave. I can't say it's my style at all, but you did a fantastic job on it. Thanks for the pics.
-
Thanks everyone.It's not my normal style, I would have prefered a nice standard rig with a pair of Vaquero's, but when leather pays the bills, I was game.At least the customer was very happy.Dave ;D
-
Howdy TW,
I realy like the stamping, it gives that rig a very nice appeal! YW you did a great job on that stamping, looks like if you make one little mistakes it would be all over!! :o But I can see you made no mistakes!
Thanks for sharing , and I like the color!!
Howdy Dave,
Differnt strokes for differnt folks!! Great job, and I am sure that your customer will be 100% happy with it! Great job and thanks for sharing!
Later
ACE
-
Thanks Ace for the flowers pard, this holster was fun to make, lots of sewing, but thanks to that Mule you made me, is a pleasant thing to do now, I have found sewing my leather to relax me, I couldn't say that before, so Thanks again Pard.
Regards
tEN wOLVES ;) :D ;D
-
TW and Dave, I'm a little late getting in here but I just wanted to add my congrats to both of you. Those are some really great rigs you made. Its always a pleasure to see great work no matter what the style.
-
Howdy Gun Butcher
It's never too late Pard, and thanks for the kind words, they're much appreciated, this holster came out better than I expected it to, because of the holster being lined the color was different, because there wasn't any dye on the fresh side, which will usually make the leather darker. Glad you liked it.
Regards
tEN wOLVES ;) :D ;D
-
(http://)
-
Beautiful Kid, your tooling and color are outstanding, that nice thick lacing give the holster a beefy look, thanks for the look see, pard ::) :o 8)
We all hope you are doing better
Regards
tEN wOLVES ;) :D ;D
-
TW thanks for the call today KT
-
Thats really some great work KT.Dave ;D
-
Dave I have to try harder to keep up with the rest of yous. Your all great. KT
-
That rig looks great, Kid. I like the lacing, too. It is a nice touch. The color is a perfect match for the grips on that pistol. Outstanding look with the colors so similar.
-
Howdy KT,
I have to agree with the other pards, I realy like that rig, I like that 2 tone look and I hope one of these days when i get this new doctor that i can get to work on the inlay rig you have been helping me with! Then I might try one of those 2 tone rigs! I hope you are feeling better, and get better everyday!
Later
ACE
-
Howdy Everyone,
It's been quite a while since I've had a chance to check in. Been tied up with family health issues, but I've got to say there sure a lot of very talented folks on here and it sure makes a guy want to get back to the work bench! :o Keep e'm come'n and keep up the great work!!
Woody ;D
-
(http://) Pure Hollywood
-
Kid, you are the man from :o BLING, ::) I'm convinced of that, on this rig you even added a drop down from the belt, and put in a mussel forward cant for the holster, as always you are designer, well done Pard.
Regards
tEN wOLVES ;) :D ;D
-
TW you have good eye for detail. Most would not have caught it. If you look at the rig I put on 364 it is the same only fancier . KT
-
Very nice, Kid. When I want to make a B-Western rig, I'll study yours. Thanks for the pics.
-
Thanks to u all.KT
-
Howdy KT,
I have to agree with the other pards, that is a KILLER rig!! I like the way you placed the spots, the lay out is awesome!!
Thanks for sharing, pard!!
Later
ACE
-
Howdy KT,
Wow! Another masterpiece from your workshop. I wouldn't even try to guess how many hours you put into this one. Many thanks for sharing your work with us.
-
(http://) Marshall this ones more your style. KT
-
Howdy Kid
Will's buckle looks right at home on this beautiful gun rig, very nice taste, and nice color tones and color, you made good use of your tooling, which gives this rig a rich and classy look, Well Done Pard ::) :o 8) :D
Regards
tEN wOLVES ;) :D ;D
-
Kid, as always you keep showing us some beautiful rigs and we keep enjoying looking at them.
-
;DHad to show I do something beside BLING ;D ;D KT
-
KT,
Great looking rig!! ;D ;D ;D
-
Howdy Kid
great lookin stuff youve been posting i like this last rig i see a Ghormley buckel and it looks to me to be his law dog holster style and his ranger belt if im wrong my bad but thats what it looks like to be but what ever its top notch work in my book may some day ill be that good
keep up the great work
Cowboy316
-
Cowboy the buckle is his rest all my design,100% belt and holster. Thanks to u all for comments.KT
-
WOW :o :o
Howdy TK,
That is a real nice looking period style holster. I knew that you could make any style of rig you want to make! That is what is nice about cowboy rigs, they can be just about any way you want to make them. No 2 rigs should ever look the same that is the pleasure of making something yourself.
Thanks for sharing!!
ACE
-
My biggest problem is to try to make somethig different.I have probley done 100 rigs and they start to run together. Thats why I have gotten rid of about half of them. ???KT
-
Well, Kid. That one is definitely a fine rig. I like the color variance on it. Those floral stamps really accent things nicely. Nice touch with the buckle, too. Nice work.
-
Howdy Pards,
Can believe I got it done!! :) :) It seems as if this rig has taken forever!! ::) Got one little thing to do and get shipped, then it is play time!!!!!! :) :) I just don't know why that this rig has taken me so long??? I have been fighting with the back, but still it just seems like i have worked on it, and worked on it, and worked on it! It is no where near perfect, but I think it turned out okay!!
I will let you all look and tell me what you think!
Thanks, and feel free to tell me what you like or dislike!! A person can never grow if his friends don't let him know about his faults!
Later
ACE
-
Hi Ace, that is one fine looking rig. It reminds me somewhat of Will G's Law Dog pattern like Johnny McCrae made recently. It looks real good to me. Thanks for sharing the picture.
-
Ace That is one darn nice rig. Great workmenship. Good design. The reason it took so long is you used about 3 cows up to make the belt. ;D ;DThe guy thats getting it should be very proud of it. KT
-
Well done Ace, that color turned out looking good, I'm sure your friend will really like it, your tooling and spot setting is right on, I might suggest that on your next belt, where you have sewed you billet and chaff, instead of going across with your sewing, use a rivet, this will make it stronger, sewing doesn't seem to hold up as well when you go across like this, and makes this area a little weaker, this is a high stress area, if you place your rivet just a little out in front of the stitching on both sides, this will make it a stronger billet and chaff.
You did well Ace , and you can be proud of yourself
tEN wOLVES ;) :D ;D
-
Howdy Ace,
You did a great job! I know that it's not the easiest job to make something according to a person's exact specifications. You did real well and you can be very proud of your work.
-
Ace,
Looks mighty fine to me!! ;D ;D I'm sure he will be very happy when he gets it.
-
Ace if the guy dont like it you can cut the belt in half and I,ll BUY IT. ;)KT
-
Ace
sweet lookin rig ya did there pard great color what color is that i might have to try it an my little 1911 western rig is dry and out of the walnut dye so as soon as i can get a pic loaded ill post it
great job as always id be proud to wear and famous Ace creation
Cowboy316
-
Good work, Ace!! You have come a long way!!
DM
-
Ace, the only thing I see wrong with it,and please take this the right way, is that it ain't mine >:( ;D
You did great Pard.
-
Ace, that rig is great! Like TW said, the spot setting is very good. The color is also right for this rig. The holsters and belt are a very good match and definitely look like they belong together. Well done.
-
Awesome, Ace! You is gooood!
-
Howdy Pards,
Thanks to every one for the kind words! TW you are right and i never gave that a thought untill you brung that up! Thanks :) :)
I am going to work on the edges some more today. CW 316, that color was realy hard to come up with and don't think I could make it again! It is a combo of oil dyes and the walnut dye, I spent more time on the color than I did putting it toghter! I will allways like the natural dyes, and won't do any other leather unless it is a color that I can get with natural home made dyes. Again, I want to thank you guys, but you are way to kind!! I have a long way to go to be a decent leather worker, but I feel that I am gaining with every peice I work on.
Later
ACE
-
howdy Gang just thought i post my attempt at walnut dye on a 1911 western style holster that Slowhand Bob so kindly posted for our use i didnt have do much fancey so i just did some deco scroll cuts and called it good
enjoy pards
Cowboy316
-
Cowboy nice color and scroll work is a nice touch. Just enough to give it charcter . Thanks for showing KT
-
Looks good, Cowboy. The color is vibrant and the scroll work is just enough. It's very balanced looking. Nice holster.
-
Howdy Cowboy,
Very nice job! Clean, neat and tastefully done! Isn't that Walnut dye great to work with? I just brewed up a fresh batch and can't wait to use it. Many thanks for sharing this with us.
-
Howdy 316
I'm glad your happy with the walnut dye, your holster really looks nice, like others have said it is just enough tooling to look classy, and Slowhand Bobs design really is a good one, I think I'm going to have to talk to Bob about this, well done Pard. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
howdy pards just finished these one piece Will Ghormley spur leathers today with antique tan and skidmores
enjoy pards
Cowboy316
-
Now those are durned pretty Cowboy!
I love the color.
Ned
-
Howdy Cowboy,
Those spur straps are beautiful! Great job of carving along with excellent workmanship! Thanks for sharing this with us.
-
Cowboy your getting pretty darn good at the carving. GREAT workmenship. KT
-
(http://) Here is a pair of holsters I just finished them Belt not done. I stole JD,S last rig. I liked the holsters so well I had to have one for my self. Thanks JD. and DM for stamps. KT
-
Hey, you got your stamps! They look good!
DM
-
DM thanks for all the help. I ordered 8 more but didnt get them yet. I order the clam shell with the insert. I think it will make a nice design. I have a lot of the weaver stamps but this is as good a quality as I have seen. I have gotten almost all the stamps made by kelly.I like them also. ;)Thanks again. KT
-
Howdy Cowboy 316
Nice work on the spur straps pards your carving is always tops, and the color and finish looks great, thanks for the look see
Regards
tEN wOLVES ;) :D ;D
How Do Kid Terico
Looks like the pards steered you in the right direction, these Dalton Masterson knock offs came out real well, that is a great looking stamp, and you mastered it real well, nice design on the holster too, thanks for sharing.
tEN wOLVES ;) ;D
-
Cowboy, the holster looks good, but those spur straps are outstanding. Love the color and the carving just hurts my eyes, Wow ;) ;) ;D
Kid, those holsters are great ,really like the stamping. It must be a bear to keep them straight.
-
Cowboy, the holster and scroll work look great, and also the spur straps. What did you use for the background stamping on the straps? Whatever you used, you handled it really well.
Kid T, nice work, but I "borrowed" the pattrern from Slowhand Bob; I can't take any credit. The stamping and color are outstanding.
I must have missed something along the way, is Dalton making or selling stamps?
-
Then my thanks to SlowHand I know I stole it from somebody ;D JD, Dalton told me where I could buy the stamp. KT
-
Kid, is that the larger of the two Barry King Crescent Shell stamps, that stamp looks like it would be fun to work with, you and Dalton both did a great job on laying it out, some of these geometric stamps are cool. let me know the size, think I'll order one.
Regards
tEN wOLVES
-
TW there are three sizes. It is no. 3 KT
-
Thanks Kid for getting back, those stamps really do produce a nice look, and BK, does a excellent work on his tools.
Regards
tEN wOLVES ;) :D ;D
-
Those straps look great, CB. Nice color, great work. You've really got the tooling down, pard.
Kid, those holsters look really good. I like the rich dark brown on them. Nice, even stamping. Really good job.
-
(http://)Well here it is with the belt finished. Thanks again to Slowhand for his holster. KT
-
Just BEAUTIFUL Kid!
I wish I had just a little of your talent.
Ned
-
I like the use of that on the belt! Looks very nice. Wouldnt have thought of that on my own.
DM
-
THanks guys. DM couldnt have made it with out u. KT
-
(http://)Couple picts of one of my western rooms.KT
-
Kid, that's a very dressy looking rig, that rig would be right at home with a suit, real snazzy, I like the way you think outside to box, this crescent shell stamp has a nice look to it. Well done Pard ::) :o 8) ;D
Regard
tEN wOLVES ;) :D ;D
-
Kid I think I posted the same time you did, your western room looks great, all us pards would be right at home in this room.
Thanks for the look see ::) :o 8)
tEN wOLVES ;) :D ;D
-
TW. Sorty of cute. You know this person knows me. Got a get well card today saying" Get well and back to normsl what ever the hell that might be for you." ;D ;D ;D KT
-
That belt really does work the two holsters into a balanced rig. Very nice job with that stamp, pard. Nice.
-
Kid, the other Pards done said it all. You definitely have another winner there.
-
GB, Marshall,TW, Ned ect. thanks to all of you.KT
-
Howdy Kid,
It's always a genuine pleasure to view your work. Seeing your Western rooms is an extra treat. Many thanks for sharing this with us.
-
Boy Howdy Kid, that's a great set up! Everything about the rig looks good, but for me, the color, and how well it's applied is just over the top. Great pictures of your western collection as well. Thanks for sharing those. I pray you're feeling better through the healiing process. God bless, JD
-
Howdy Pards, :)
Looks like some SUPER leather work being shown!! CW316 great work, love the walnut dye!! KT, very nice stamping!! I realy like that stamp!! Realy gives a great look, simple put with great detail!! looks to be the best of 2 worilds!!
Thank both of you pards for sharing your get work!
ACE
-
(http://)Few more
-
(http://) Shotgun stock. Sorry about pict. KT
-
(http://)
-
(http://)Floral rig
-
Terry, you've got this stuff nailed! That's really good carving on a really sharp rig!
-
Oh, that does look good, Kid. I like the tooling. Outstanding. The gold accent is a nice touch, too. Very fine work.
-
I recently had an elderly gent come to me wanting a single holster rig for his new 44 mag New Model Blackhawk. He is partially handicapped in that he cannot lift his right arm more than a few inches...so after a few minutes of measuring and testing with another rig...we finally decided that a crossdraw was in order. Just a plain "no frills" rig. Well, he picked it up last night and he can use it perfectly with his bad arm...no lifting is required...another happy camper. I got to thniking though...what happens when he fires that thing with that bad arm????????????
-
Saw something today that made me wish I had a camera. Down at Jersey Lilly was a fella with a gun cart...fully enclosed compartment for 4 long guns, storage box under a seat, 2cup holders, all the niceties...COMPLETELY COVERED IN TOOLED LEATHER.
I mean completely covered. The inside was faced with tooled leather, every flat surface, the wells for the butts, the barrel rest, the inside of the doors, the floor, all of it.
The outside was totally covered, too, except for the axles and tires, and a few places on the frame where it wouldn't be practical. Even the wheel disks up to the very edges of the rims, and the entire handle.
He had a few places where he'd put EOT badges and the like in places tooled to frame them and show them off.
A lot of this was stamped, but a lot was very nicely carved and hand tooled. It was all artfully done and went together like a fine painting. The guy is a master at this craft...and I couldn't lay my hands on a camera.
I was also so dumbfounded I didn't get his name.I suggested he post pictures here. Maybe he will. I sure hope so.
-
Howdy Outrider
Nice clean work pard, your craftsmanship is always a pleasure to feast the eyes on, like the color too ::) :o 8) ;D
Regards
tEN wOLVES ;) :D ;D
-
Outrider nice work, Simple but very useable. He should like it. KT
-
That rig is very beautiful in the siimple, clean lines and dark color, Outrider. Very tastefully done. I like it.
40R, that sounds like a cool cart. A lot of work, but it must look nice. If you ever see it again, get his email and have him send a pic.
-
(http://)
-
(http://)
-
(http://)
-
KT,
Now thats a neat room....I hope you have those steer horns secured...would make one heck of a bump on your head...I like that room
-
Outrider thank you. I have 2 of them and I have spent many hours just sitting and looking at my collection wondering what the heck have I done. ;D ;D ;D KT
-
Howdy Outrider,
That is a very clean professional and looking rig! As always your excellent workmanship shines through. Many thanks for sharing your work with us.
Howdy Kid,
Great pictures! Always a pleasure to view your collections and displays. Please keep em' coming.
-
Outrider, you are a real pro. That is such a clean rig, a well designed and executed holster and gun belt if I ever saw one. I appreciate all the fancy rigs we'be seen lately, but I also really appreciate a nice, straight forward set up as well.
KT, what a nice set up you have there. Thanks for all the awesome pictures. If we can't be there in person, it's nice to have the opportunity to visit on line.
-
Very nice work Outrider!!
Nice room KT.
DM
-
(http://)Rig I made this weekend . Just finished except need to sew belt. Brindle inlaid. Belt buckles on left hip with bullet loops in front and back of the holster. Got carried away on holster shape. Belt and holster fully lined. KT
-
Nice rig KT, the color is nice, nice design, and classic gun fighter style.
Regards
tEN wOLVES ;) :D ;D
-
Outrider and KT, Beautiful rigs from both ends of the spectrum. It always amazes me how two such different styles can evoke the same strong feelings when you look at them. Great work pards
-
Thanks Pards. KT
-
Hi Terry, I don't see any stitching on that belt. Is it lined without sewing it?
-
Hi Jeff, You missed on my post I said I had to sew the belt yet. You have good eyes for catching it . Thanks KT
-
That's an interesting rig, Kid. Very different. It looks good.
-
Well KT, my eyes work for the pictures better than the type. I'm too much of a speed reader, and it's a bad habit :-X
-
Thanks for the invite Folks,
As soon as I figger out how to post a pik I'll get right on it.
I have for many years done leather crafting for a hobby, my first project was a gunbelt and holster for my Dad.
I think My Brother has it now since our Dad passed away.
Tawk atcha later,
M. Slick
-
Howdy MontanaSlick
Welcome to the forum pard, we'll look forward to seeing some of your work.
Regards
tEN wOLVES ;) :D ;D
-
Hi Montanaslick. Glad your here to join the crew. Best bunch of Pards you could hope for. Show you rigs an soon as you can. KT
-
Howdy all yall leather poundin Pards,
Thought I'd hangs some pics of my latest knife sheath an pick your brains for some feedback. She's 8-9 oz laced in the mexican basketweave style and tooled with a basic relief scroll pattern. Oh and lined with black pigskin lining leather of course.
What do yall think ?
(http://i570.photobucket.com/albums/ss147/joshdabney/scrollsheathlaced014.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/scrollsheathlaced015.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/scrollsheathlaced017.jpg)
-
The rest of the pics
(http://i570.photobucket.com/albums/ss147/joshdabney/scrollsheathlaced021.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/scrollsheathlaced023.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/Picture026.jpg)
-
Josh thats some excellent work. That sheath is great as is the knife. They go well together. Keep it up.KT
-
howdy Josh
welcome to the wild bunch and great work on the knife and sheath love the inlayed brass in the handle
and just to give ya a heads up Gun glick Rick will try to talk you out of that knife so for safe keep just send the bad boy my way ill keep it safe from the Rickster LOL (all in fun Rick )
great work Josh
and a big Wyoming welcome to you to MontanaSlick lookin forward to seeing your work
Cowboy316
-
Fantastic work Josh, I like everything about the sheath and the knife, and thanks for explaining how the wire is inlaid into the wood handle, you really have talent pard, and the sheath ,the tooling is beautiful, and the lacing too, I'm going to have to learn that Mexican braid, that is really sharp looking, I see you put a nice welt in at heavy end of the blade, that should make for an easier pull out of the knife, and the same for putting it back. Thanks for the look see. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Howdy to all
It would take me a month of Sundays to comment on all the wonderful work that was done while I was away.
Awesome work guys.
WC
-
Here it goes.....
http://i120.photobucket.com/albums/o187/JakeHarlow/Blackbeauty.jpg
Here is the Black Beauty I made a few years ago, I use it at all of my matches.
MS
-
Howdy MontanaSlick
Very nice pard, your rig has a classy look to it and is classic SASS looking with the star conchos, it look great, and I can see why you're proud of it, I hope you will pick up where you left off, and will have more to show us down the trail.
Thanks for the look see Pard ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
:) Thanks Ten Wolves for the compliment and thanks for the warm welcome.
I'm in the process of constructing a new craft room, both for my guns and leather. Hope to get it up and running here soon.
I left the Hell on Wheels Country I was there for 8 yrs. in Deadwood DT,and relocated in Washington State. I may be from Montana but consider Wa. my home.
M.Slick,
Historian and Old West Re- enactor. 8)
-
MS nice rig. Good workmenship. I have always been partial to blk. with silver conchos. I am waiting to see your next one. KT
-
Josh, that one is very nice work. I like the lacing and the dark background.
Slick, Nice rig. The two-tone conchos look good with the black. Good work. Welcome to the forum. Looking forward to more of your stuff.
Here's a link on how to do photos. http://www.cascity.com/forumhall/index.php/topic,15416.0.html (http://www.cascity.com/forumhall/index.php/topic,15416.0.html)
Our FAQ thread for more good information. http://www.cascity.com/forumhall/index.php/topic,13207.0.html (http://www.cascity.com/forumhall/index.php/topic,13207.0.html)
Thanks, pards. At's a pleasure to see your stuff.
-
Howdy Josh,
Your Knife and sheath are simply outstanding! You have created a true work of art. Many thanks for sharing this with us.
Howdy Slick,
Thank you for sharing that beautiful Rig with us. Great design and workmanship! I'm sure you get lots of compliments from your fellow shooters.
-
Thanks Will for the info fer posting those Piks, I'll give it a try.
Thank you Johnny McCrea, I'd like to see yer leather crafts on the thread.
Ya gotta be a Scotsman with the name like McCrea.
-
Montana! Glad to see you made it here from the Sass Wire! Nice rig, and am ready to see more!
Josh, very beautiful work on that knife and sheath!
DM
-
Montana,
Very nice work...and welcome aboard..great folks in this room
-
Thanks Dalton for the comp.
Tell Ms. Freeda Darlin hello
Just never got over to Hell on Wheels and I was so close too.
Thanks to you Outrider for making me welcome and those encouraging words, kinda like "Home in the Leather?
Still in limbo on the leather crafting with re-modeling the craft room. Gotta getter done.
Post a pik later taday,I think I have it all fiigered out.
MS
-
Just finished these two holsters. They are from two different hides and were dyed with a freshly brewed batch of Walnut Dye. Both were in the dye for around 15 hours. The Mexican Loop has three coats of Neet's and the Slim Jim has one. Both have one coat of Skidmores so far.
-
Johnny Mc since u made two does that mean ones for me? ;D Nice spoting and great color. I sure like them. Good job. KT
-
Howdy Johnny
Nice work pard, the color came out real well, it's also nice to be able to vary the color by just adding a little oil, the holsters them selves look great too, nice border tooling, just the right amount , and your placement of your spots is right on the money, they look like they just stepped out of the 1800's, thanks for the look see. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Great holsters Johnny!
-
Montana, that's a sweet looking rig. When you get done with your room you can give me some pointers on getting mine done ;) ;D
Johnnie, now thats a pair to draw to. That natural dye is the berries.
-
Gun Butcher, be glad to share some piks on the craft room when it's done.
The tooling room is gonna be in the gun room and the table for layouts is in the HO scale Railroad room.
Now figure that one out. Space availability? :)
Does anyone have a special dye you like to use? I need one that doesn't bleed off on the clothes.
My black rig is fine, it's my light brown one I have a problem with.
I use a vegetable dye.
MS
-
Nice pair of holsters Johnny! I really like those!
Nice to see a mismatched pair once in awhile!
DM
-
Nice leather Johnny, and the guns, what about the guns, they caught my eye. ;)
-
Many thanks for the kind words Pards. Without the help and encouragement received on this forum, I'd never be doing Leather Working like this.
The Slim Jim contains a Cimarron .44 Colt Richards Transition. The Mexican Loop contains a USFA .45 Colt 1873 SAA. Both have grips I've made out of Corian installed.
-
Way to go..Johnny. nice work there...I especially like the slim jim...
-
(http://)Rig I finished late last night. KT
-
(http://)
-
Hi Guys,
Sure has been a lot of nice looking leather posted in last couple of weeks! Seems we have some new pards on here, welcome! Keep the good work up!! It is realy nice to come on here and see all the super leather that is posted.
Later
ACE
-
Boy Kid, you really bang those things out! I guess speed comes from experience. This rig looks great. I really like the keeper design, it's quite eunique. Thanks for posting the pics
-
Okay KT, those are just flash! If you want to hide them for you so Rick can't get 'em let me know ;D
Bodie
-
Howdy Johnny
Johnny, all I can say pard, is that you really are a talent, there isn't much you haven't tackled that you haven't done well at, and your last work is proof of that.
Regards
tEN wOLVES ;) :D ;D
-
It's nice to see some real leather crafters doing what they do best.
I see some of the best of the best here on the forum
KT, ya did a good style on that leather, I like it..But, kin ya shoot? :) Fine work Pard.
M.S.
-
Bodie u got a deal. MS DID YOU SAY can I shoot? What a dumb ? I got a old Sherman tank with a 105 mounted on it and u ask can I shoot? ;D ;D ;D KT
-
hey Kid sweet lookin rigs and man you kick them out you must have all the right tools
great work pard keep it up hope some day im that good
Cowboy316
-
Cowboy you and every one else doing leather work are great on this site. Its just we all have different styles which makes it more interesting KT
-
KT, Alright. I want to see the Patton Rig you have made to go with the Sherman!?!
Or just pics of the Sherman doing its thing!
DM
-
DM wheres your house? I,ll point it in that direction and give u a close up ;D ;D KT
-
Here's my Montana Sunset Rig....
-
MS , now thats a nice rig. Just enough tooling to give it character. Good color, nice work. KT
-
Montana...I like that rig.
-
Very nice Montana!
KT, just a little to the left, and I say "cheese"!
DM
-
DM I see your from NEBR. but for a second I though you were from Wisc. with that cheese. ;) ??? ;D KT
-
Thanks Fellow LeatherCrafters, I kin see we love leather.
Montana Sunset may be headed off to Florida soon, it was my SideKicks Birthday here awhile back.
If he likes it, it's his. Happy Birthday Pard. "Florida Sunshine"? :D
Dalton is a true blue Neb. "Huskers Fan. 8)
-
Very nice MS, like KT said just enough tooling to be classy, the color looks good too, this rig kind of reminds me of one that El PASO Saddlery makes, I always liked that one too, thanks for sharing, and have a good trip and a safe one ta boot.
Regards
tEN wOLVES ;) :D ;D
-
man MS very slick lookin rig there pard love that coloring im gonna have to get going and make a belt to match a pair of holsters ive got tooled up but not dont yet lol
great work
Cowboy316
-
Nice looking rig.Us Florida guys love the sunshine ;D. Dave
-
Howdy Kid & Montana Slick,
Wow! Those are some beautiful rigs you fellows have posted. Very professional and a real pleasure to look at. Many thanks for sharing this with us.
-
Now if I keep posting my leather, I'm gonna run out here soon.
Better get busy and create some more rigs. :)
Y'all do mighty fine work on yer leathers, I like to see handcrafted, it comes from the heart, not the store.
M.Slick
-
Montana and KT, beautiful rigs, and like you said KT different styles for different tastes and they all look great. From the guy just starting out , to the one trying to regain lost skills, to the Master leathersmith, they all have something that appeals to me. Montana said it, from the heart not the store.
-
C316,
Were waiting to see yer gunbelt, take yer time, but, in a hurry and do yer best as you always do.
Got a note from my SideKick in Florida. He wants the Montana Sunset rig, hez gonna change the name to "Florida Sunshine.
Sending it off on Friday along with the matching knife sheath.
These rigs are like yer Children, ya hate to see em leave home.
M.Slick
-
Howdy Pards
Good lookin rigs.
WC
-
howdy MS
heres a repete post of a holster and belt i did for my reproduction 1851 navy 44 cal this was my very first belt
Cowboy316
-
First one C316? What a nice rig, just the right color and designs.
Ya done good Pard, I like it.
Camp fire is flaming warm and that good ol Wyoming Cawfee is a brewing, pull up a sagebrush and sit a spell.
Got plenty of brew.
M.Slick
-
Good lookin belt Cowboy
-
Cowboy if thats your first rig its great .Its really good if it wasnt your first rig. My first rigs were so bad that when I went to get rid of them they wouldnt even burn. ;) ;D KT
-
Kid that holster isnt my first rig just a first try at a belt have attached a pic of my first holster ever done bout a year ago
go ahead and laugh i look at it an then look at the work i do now and laugh my backside off LOL
Cowboy316
-
Cowboy ,mine were so bad that if I made one that good I would have kept it. ;D ;)KT
-
Nothing wrong with that one Cowboy, looks like it fits like a glove, made to measure.
MS
-
Howdy Montana Slick,
I see where I called you Montana Slim a few posts back. Sorry about that. Never did like to get a man's name wrong. I fired my proof reader.
-
Nice work on those two holsters, Johnny. I like the color on them. It looks like you made a hammer cutout on the right one, much like the Frank James holster only planned into the design. That's a nice touch.
That black rig is good, Kid. The outside rivets on the keepers is a good look. Nice.
I agree with the pards here, MS. that rig is just the right color and looks to have a good amount of design on it. Thanks for the
pics.
Nice rig, Cowboy. The belt is very good. Just right for the design on the holster. You've come a long ways in a year, pard. Lookin' good.
-
It's okay Johnny, M.Slim and I are used to being called one another. Hez my Sidekick and has a sinse of humor too.
I like yer leather Johnny, ya do good work.
M.Slick, I think ::)
ps, Thanks for the compliment Marshal, it means a lot to all of us when someone appreciates our crafts.
-
Boy Howdy Pards :)
The superb leather work just keeps comeing!! :o :o I want to tell everyone of you all that the leather creations that you all are doing is AWESOME!! And i enjoy looking at it all!!
keep it coming!
ACE
-
Here's one I just finished. And before I send it off to what I hope is a happy customer, I thought I would give you guys a look see.
The color is two coats of Pecan applied witha dauber and one coat of Lexol. I put a snap on this one because the man its going to stomps around in the mountains quite a bit and I figured the knife needed a little extra security.
Thanks , Gun Butcher
-
GB ,now thats one fine knive and sheath. Like the color and stamping. Seems short. How long is it? Like the larger dia. of the handle.KT
-
Kid, thanks for the compliments. That is a knife I made about 5yrs ago out of 01 tool steel. The blade is about 4 3/4" long ,overall it is 9"
-
GB, I really like ye knife and sheath, the color is awsome and the stamping gives the sheath a oak leaf effect.
Good craftsmanship ..
I have some leather just waiting for the leather tools. :)
-
GB I really like that knive. U have real talent for knife making. Thanks for the reply. KT
-
That's a Beauty GB, love the color and the border tooling, this was a good look see, thanks pard :o 8) :D
Regards
tEN wOLVES ;) ;D
-
Thanks Montana, and hurry up and get to work ;) ;D
Kid, I get lucky every now and then. You should see the box of " maybe I will figure out a way to fix it someday" stuff ::)
Much appreciated TW ,I kind of figured I should get better at stamping and stay away from the carving for awhile.
-
GB when all of you knife makers started showing your work I desided to keep doing what I know best. Cleaning chickens. ;D KT
-
Aw heck Kid, You just send me the next thing you make outa them chicken skins and I will be happier than an ol maid at the YMCA ;D ;D ;)
-
GB,
That's a real beaut ! That blade is a great design for a hunter and the stag looks to be extra comfy in the hand. A Fine sheath to match, Great work ;D
-
Hey Josh, I appreciate your kindness. Just wish I could spend a little time in your shop to smooth out some of my 'almost worked ideas'. The blade was copied from one that Track of the wolf sells and it works great on a deer.
-
Lookin' good, GB. That sheath really goes nicely with the knife. Good work on both. :D
-
GB got one thing to say WHY YOU DIRTY RAT lol
looks great hope that customer likes ia a lot ;D ;D ;D ;D
Cowboy316
-
Howdy GB,
Wow! That's one heck of a job on the Sheath and the Knife. Nifty designs on the Sheath and Knife! I know your customer will be very pleased. Many thanks for sharing this with us.
-
GB,
My doors always open to a fellow knife nut Pard. I'd be happy to help in anyway a'tall. This here online stuff can be purty helpfull an my shop is always open so if'n ya find yer way to central florida, look me up.
-Josh
-
Josh, I would be happy to do that. I live up here in Alabama just a shade north of Montgomery and I been known to drift off south every now and then. I will let you know the next time I do.
-
well pards heres a first for me i got an order for a filligreed cell case the guy wanted a blue background and the rest of the design was up to me and heres what i came up with (oh and by the way this is my first fillligee project)
enjoy amd thanks for everything pards
Cowboy316
-
Cowboy 316, did you forget something ??? :-\ ::) :o
TW ;) :D ;D
-
ya got excited with how this turned out a hit the wrong button LOL
Cowboy316
-
As always Cowboy your carving is fantastic. Wish I had the touch like you do.
-
Cowboy thats a nice job. That blue is a real eye catcher. . KT
-
WOW 316, That is really sharp, your carving is always top notch :D ;D
tEN wOLVES ;) :D ;D
-
Very nice, Cowboy. Your tooling is definitely up to speed these days. I like the MW on it, too.
MW
;D
-
Awsome Cowboy.
How is the snow situation? Good time to stay home and do some leather projects.
Nice Fall weather here, no complaints.
MS
-
GB
I like the knife and sheath.
316
Nice cel case.
WC
-
Haven't seen any leather on here I didn't like, there all awsome.
My Sidekick down in Florida got the gunbelt and holsters I made for him. I sent it off last Friday and he got on Monday.
Thats coast to coast in three days, try that Wells Fargo.
To make a long story short, he aint taken that rig off since he got em. ::)
-
That's Great Slick!
I've always felt that was the best part of doing leather. Seeing or hearing the customers reaction after delivery!!!
I probably wouldn't be donig leather without that!
Ned
-
MS, like I said on a earlier post. That was a great rig. If he didnt like it I would have SHOCKED. He should be proud of it. KT
-
There's a lot of fine leather crossing my screen, Y'all did some exelent Leathercrafting.
KC, I really like the brown, want to share the source?
Thanks for the compliments Pards, yer getting me geared up for some more projects. :)
M.Slick
-
Howdy Cowboy,
Great job! Another fine example of your carving skills. Many thanks for sharing this with us.
-
I dug this pic out of the old leather shoppe...I made this rig for my sidekick up in Calgary, Alberta a few years back.
Now, I wanna make one fer myself this winter...
Hope ya like it.
M. Slick
-
(http://)Finished this rig this afternoon.KT
-
Montana Slick, and Kid Terico, nice looking gun leather pards, I like all that tooling, it really stands out.
Thanks for the look see
Regards
tEN wOLVES ;) :D ;D
-
KT,
Lookin good & great colour!! ;D ;D
-
TW and DR B I dont know if u noticed that the belt is very short. Only 28",but with the extended billets it will fit 40 " waist. Its lined but very light. KT
-
KT, That is a great lookin rig, I really love the stamping and color. Great job.....
AZ Cattleman
-
Howdy TK,
That is one mighty fine looking rig!! Like AZ said great color and nice stamping :o :o :o :o That rig just flows so nice toghter!!! Kt where did you get those grips???? Those look like something I would have!!
Later
ACE
-
TW and DR B I dont know if u noticed that the belt is very short. Only 28",but with the extended billets it will fit 40 " waist. Its lined but very light. KT
I saw that Kid, nice design, gets that thick leather away from the mid section, LOL ;D
tEN wOLVES ;) :D ;D
-
Ace old buddy. Good to see your on site. Miss your posts. Hope your feeling better. Grips are made by Buffale Bros.
-
Kid, I don't think I have ever seen a rig as beautiful as your new one. That just does it for me. The rich deep color and the flow of the stamping, along with the style is just a TOTAL package. You have just given me new inspiration. I need a picture that I can have made into a poster of that rig to put on the wall of my shop so that all I have to do is sit there and look at it when I need to remember where I want to be with my leatherwork. Thank you sir for allowing use to share. It is the apex of our craft.
You are truly a master.
-
GB I dont really know what to say. except THANK YOU very much. KT
-
Nice work KT, I like the tooling and the color. I'm leaning towards brown for my next rig.
MS
-
Kid, I meant every word of it. There are different styles that appeal to different people. I guess that one is mine and the workmanship just accents every inch of it.
-
This is a Slowhand Bob pattern (thanks Bob!) that I made a little larger, so I could line it. The buddy I'm making it for wanted it lined. As you can see it's not done yet. I still need to do some finish. I haven't rivited the keeper strap on yet, waiting to get the finish on. The other holes are for a belt keeper.
I see some changes needed on the basket stamping, and several other areas, but it's better than the previous one, so I guess that counts for something!
I put a finish on my guitar strap I didn't like, so I'm going to make another one.
(http://i165.photobucket.com/albums/u51/HarleyPastor/slowhand19111.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/slowhand19112.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/slowhand19113.jpg)
-
Looking good JD, nice color. Good compact piece. It should more than do the job. KT
-
JD, I see you have been busy. That one is going to look great and you did a real good job on the basket weave. Is that one of those high dollar stamps you used along the border?
-
Howdy All, :)
KT,
Thanks for the heads up on the grips, and i love the holster you made for the guns with the Aces grips! Great job!!
JD,
Super looking wild bunch holster!! I have not made one for one of my 1911's, but i hope to someday!! I didn't see the flaw in the basket weave, but I think that we are our worst cridets?(Bad spelling) You are doing a great job!!
Later
ACE
-
Howdy Kid,
Kid, I don't think I have ever seen a rig as beautiful as your new one. That just does it for me. The rich deep color and the flow of the stamping, along with the style is just a TOTAL package. You have just given me new inspiration. I need a picture that I can have made into a poster of that rig to put on the wall of my shop so that all I have to do is sit there and look at it when I need to remember where I want to be with my leatherwork. Thank you sir for allowing use to share. It is the apex of our craft.
You are truly a master.
Gun Butcher expressed what I wanted to say far better than I could.
Howdy JD,
Very nice job on the 1911 Holster! You are turning out some great looking work. Thanks for sharing this with us,
-
Howdy Jeff
Pard you did a great job on this Wild Bunch holster, I think your friend is going to be blown away with it, I wouldn't be too hard on yourself, I think your stamping looks fine, and when it's finished it will look even better, Slowhand Bobs design is a dandy, I ll have to try this myself, as soon as I get a 1911, I like this one with the ambi safety, for lefty's like me.
Regards
tEN wOLVES ;) :D ;D
-
Thanks for the positive comments guys. The important thing for me is to recognize my mistakes so as to correct them next time. The border stamp is a Craftool D 607, but the basket stamp is a Barry King I picked up last year at a leather trade show, the only one I’ve been to. I spread the basket stamp out too much, and didn't hook the legs.
I used Bag Kote cut with water for a resist, then used Eco Flo tan antique gel on the outside. It’s got a coat of Bee Natural saddle oil on it now, then I will use Skidmores. The lining is just oiled, but I’ll put Skidmores on it too.
I used a machine to sew the liner, and hand stitched the main seam. The problem with using Photo Bucket for pictures is the quality is so good you can really see the flaws!
(http://i165.photobucket.com/albums/u51/HarleyPastor/1911stained.jpg)
-
JD,
Ease up on yourself there pard! Looks great up close to. Remember, we see what you did, not what you had in your mind to start with. Great looking holster!! ;D
-
JD, I think that looks great!! Yes, the basketweave is a little long in the tooth, but it still looks even and straight. Wouldnt worry about it until you do the next one!
Stitching looks good too!
DM
-
JD, I think it looks great pard.Dave ;D
-
Thought I would put up one of my recent knives and sheath.It's for one of my old style friction folders.Dave :)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/axisFF1.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/axisFF2.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/axisFF3.jpg)
-
Very Cool Dave!
I love the knife, I'm gonna have to give one of those a go soon.
Ned
-
Howdy Dave :D
Awesome sheath pard, I like everything about it, great color/ inlay/ lacing and design, that knife is neat too, a real period folder ::) 8), what type inlay, real or artificial, it really looks good with that dark brown ::)
Thanks for sharing
tEN wOLVES ;) :D ;D
-
Howdy
You guys are doing some great work.
WC
-
TW, that's the real thing, Eastern Diamondback rattlesnake from right here in Florida.Thanks for the nice comments, pards.Dave ;D
-
Howdy Dave, :)
Super looking knife and knife sheath!!!! :o :o I like that damus blade!!! Are you buying your blanks or do you make them?
Very nice looking rig!
Thanks for sharing!
ACE
-
Hi Ace and thank you. I buy raw Damascus billets from several damascus makers and then cut and shape my own blades, and do my own heat treat.I even tanned the snakeskins.Dave ;D
-
JD, what are you using to make the holes for the main stitching?
Flaws? Never look fer em myself,is ther flaws in the Mona Lisa? :)
-
Montana, I keep reminding a friend of mine who builds bunk beds to support his family since being laid off work that he's not building a frame for the Mona Lisa! I guess I need to listen to my own advice.
To punch holes, I use an Osborne Hammer awl, an idea from Chuck Burrows. I use a Dremel with a small drill bit to punch through the welt, an idea from several guys here on the Forum.
Here it is pretty much finished. It’s for a hefty guy, so having the holster tilt out some is real handy. This is my first 1911, and I sure do appreciate Slowhand Bob’s pattern and tutorial.
(http://i165.photobucket.com/albums/u51/HarleyPastor/1911finished1.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/1911finished2.jpg)
-
JD the finished product is very nice. I like the contrast in color. KT
-
Howdy JD,
That's a real good looking Holster! A very neat and professional job! You can be very proud of your work. Many thanks for sharing this with us.
-
JD that is one fine rig. The US concho is a nice touch compared to a stamped holster.
-
Dave, that's a very cool knife and sheath. I've never seen anything like the knife before. Thanks for sharing the pics.
-
JD, friction folders were pretty common in that era.I use to make them in the old style then started modernizing them a bit, but I miss the older styles.Dave
here's a couple I did many years ago
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/frf03.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/frfl01.jpg)
-
JD, like Johnny said, neat and professional, you've come a long ways pard, and everything you have been turning out has been beautiful, I can see where you have taken your time to do it right, WELL DONE Pard ::) :o 8)
Dave, great looking folders, I've also enjoyed visiting your web site, you do beautiful work, on both knives and leather, thanks for the look see. ::) :o 8) ;D
Regards Pards
tEN wOLVES ;) :D ;D
-
MY first attempt !! One holster is a straight hang crossdraw; the other is straight hang strongside. The belt has alternating Buffalo skull, Crossed Rifles & Snake stamp; the border is barbed wire !! The other belt is also straight crossdraw & straight Strong; the belt itself is beveled on either side of the dark center strip so that the strip appears to stand out from the belt but really does not !!
-
DD,
Great looking rigs there, DD! ;D Thanks for sharing.
-
Great rigs, like the two toned rig. Keep them comin...
AZ Cattleman
-
Well Len, you did good pard, for a first gun rig it came out fine, I see you're a lefty like me, keep up the good work pard, we'll be looking for more nice pieces from you in the future, and thanks for sharing with us, you have a great start in your leather crafting.
Regards
tEN wOLVES ;) :D ;D
-
DD nice leather work. Nice to see some thing different. KT
-
WOW JD, you couldnt have gotten very much of that from me pard as I never do anything that looks anywhere near that good. I just do not think that little holster coud be done any finer than you did it, congratulations. Robby
-
Dave those folders and sheaths take me back to my buckskinnin' days, they look great.
DD, you are well and truly bit my friend. That is a great job for a first try. It won't be long until you are laying awake at night trying to decide what your next project is going to be ;)
JD, you ol dog that rig finished out great. Are you the same guy who started doing leatherwork just a short time ago ??? ;) ;D
-
Howdy, pards. I see some very good work happened while I was gone. Slick, Kid, those are very nice rigs. I like them both.
JD, that holster is fine. The basketweave is good. Nice work.
Those old time folders and sheaths are really good looking items, DC. Nice work and nice idea to resurrect the old designs.
Very nice work, DD. Good to see another pard popping in with some nice stuff. Thanks for the pics and welcome to the forum.
OK, I have to go catch up on the other threads here. Good work, all of you.
-
Thanks M. Will,,have a nice trip? Glad yer back.
Thanks JD for the pik of yer holster, mighty fine craftmanship there. It's very similar to the one I made for a Friend in N.Dak , he has a Glock 9mm and sure likes it. I got the measurements off of his gun and it turned out okay,
I will get one of those awls and continue using my smalll drill and bit for my stitching.I like the holes a bit big as it is kinder to my needles. No problem with the stitches , nice and tight.
Worked all day on my new leather and gun shop, Y'all got me excited and had to get things set up.
Thingss are looking good so far.
Thanks Pards
MS
-
Howdy Pards,
There's no shoes fer this one yet but I wanted to put'er here and ask yall's advice about it. I finished this one up last night and I'm havin a bit of trouble tryin to decide what type of sheath to make fer her. Figured who better to ask than the good folks right here in The Leather Shop. I was thinkin about tryin out the mexican loop style but just not sure if thats gonna be the right fit. If yall wanna read a bit more about this knife you can check out this thread
http://www.cascity.com/forumhall/index.php/topic,29196.0.html
(http://i570.photobucket.com/albums/ss147/joshdabney/cowboy1001.jpg)
I sure do appreciate yall's help in figurin out the best way to go with this sheath
Thanks alot Pards, Josh ;D
-
Thanks M. Will,,have a nice trip? Glad yer back.
Thanks. It's good to be back, even though it was a fine jaunt.
Josh, the double rows of pins really looks good. That knife has a time-worn quality to it. I'd be tempted to do do rawhide and buckskin with fringe. Possibly a twisted leather belt loop on it.
-
Howdy Dave,
Wow! Those are some beautiful Knives and Sheath's you are turning out. Great designs coupled with excellent workmanship! Many thanks for sharing your talents with us.
Howdy Dutch,
Great job especially for your first project. There is a lot of satisfaction out of making one's own leather. We look forward to seeing your future work.
Howdy Josh,
Beautiful Knife! It looks like a fine museum piece, That's a great design along with some excellent workmanship. Thank you for sharing this with us.
Howdy Montana Slick,
Sorry I missed the Rig you made for your sidekick in Calgary. It looks great and I'll bet your friend was was well pleased with it.
I sure do look forward to seeing what you make for yourself this winter.
-
Robby, thanks for the vote of confidence; it means a lot to me!
DD, that's a fine first build for your holsters and belts. Lacing is not something I've tried yet, but I do plan to get to it one of these days. As you've probably discovered, this can be addictive! After you build one, you want to improve on your work, so you begin planning the next one.
Josh that is a really fine looking knife! You guys that build knives impress the heck out of me. I’ve got a fine looking knife that Ned Buckshot made for me, but I’ve not gotten around to making a sheath for it yet; too many projects, not enough free time.
I wonder what a twisted belt loop looks like? It sounds interesting. That is definitely an ole time looking knife, and a sheath like Marshall mentioned would really compliment it.
-
Josh, thats a fine looking knife. It sure looks aged. There so many things u could do on a sheaf, but I like Marshals idea. Think it would look good. KT
-
JD, here's what a twisted belt loop looks like. It looks like it wouldn't work too well, but it hangs straight. This is on a knife that was made for me by a knife maker in Finland. It was a gift, I had nothing to do with making it. It's a really fine knife. Here's also a picture of the whole thing.
-
Howdy Pards,
There's no shoes fer this one yet but I wanted to put'er here and ask yall's advice about it. I finished this one up last night and I'm havin a bit of trouble tryin to decide what type of sheath to make fer her. Figured who better to ask than the good folks right here in The Leather Shop. I was thinkin about tryin out the mexican loop style but just not sure if thats gonna be the right fit. If yall wanna read a bit more about this knife you can check out this thread
http://www.cascity.com/forumhall/index.php/topic,29196.0.html
(http://i570.photobucket.com/albums/ss147/joshdabney/cowboy1001.jpg)
I sure do appreciate yall's help in figurin out the best way to go with this sheath
Thanks alot Pards, Josh ;D
S'cool looking knife. Again, the workmanship is right on the money.
-
Howdy Josh
This knife is Awesome, it has the look of old yet perfectly kept, I like the style and your your choice of scales and pins really make this knife stand out, the blade looks like you could shave with it. I think your idea of a Mexican loop would look good, and like Marshal Wills suggested maybe some fringe on the seam line or even the mouth would look good, but what ever you choose will look good holding this neat looking knife. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Josh, definitely a South of the border style sheath would be great.
Nice knife
MS
-
I know I should be able to figure this out myself, but what's to keep the twist in the loop?
-
The leather is twisted when wet. When tied to the sheath, a little extra twist will hold the loop in it.
-
Now thats something I have never seen before thanks for showing us Marshal. And I can see that the knife and sheath are pretty special.
-
JD, here's what a twisted belt loop looks like. It looks like it wouldn't work too well, but it hangs straight. This is on a knife that was made for me by a knife maker in Finland. It was a gift, I had nothing to do with making it. It's a really fine knife. Here's also a picture of the whole thing.
Interesting effect Will, first time I've seen this as well, that's a good looking knife there, is that a wooden sheath wrapped in leather, nice looking and unusual look, almost Asian in design.
tEN wOLVES ;) :D ;D
-
Marshal Thanks for pict. Never seen that befor. Knife and sheath are nice but different. Takes some to get used to it. KT
-
That knife is a traditional Finnish knife. The lower part of the sheath is wood and the upper is leather. The leather holds the knife in without binding. The handle bottoms against the wooden part of the sheath. It's a part of the Finnish traditional outfit, much like our western holsters and knives are.
-
Will, I sure like that knife and sheath and the wood is awsome too.
Got my new leather shop finished, just getting it arranged and stocked up then it's Project time. :)
MS
-
Very nice Puuko (sp) Marshal Will! That loop is interesting. May have to try that one of these sheaths coming up!
Josh, your knife is georgeous, and I agree that a nice Chuck Burrows type sheath would look great on it!
DM
-
Thanks, pards.
Josh, have you come up with a plan on what you will be doing yet?
-
That knife is a traditional Finnish knife. The lower part of the sheath is wood and the upper is leather. The leather holds the knife in without binding. The handle bottoms against the wooden part of the sheath. It's a part of the Finnish traditional outfit, much like our western holsters and knives are.
Howdy Will
I guess I was way off with this knife and sheaths origin, but your right, it does have that look to it .
Thanks for the heads up on this
tEN wOLVES ;) :D ;D
-
MWW,
Thats a fine example of a Puukko. I've never used one but those who have seem to fall in love with'em.
I got a variety of suggestions as to the style of sheath for this knife and I do know that many Pards just might prefer to make their own sheath fer it. So I decided to go ahead and post'er in the classifieds an see how it goes over.
I'm not opposed to any particular style and would embrace the customers request as best of my ability. I have been thinking that perhaps a rawhide covered sheath may be the way to go with this one but I do kinda dislike perhaps alienating a potential customer with the design of the sheath. These are just my thoughts out loud and there is the chance I'm totally off base with this line of thought.
I'm figurin perhaps a poll may be the order of the day to assist in figurin things out here.
Lets assume your in the market fer a fine handmade knife. Would you rather... ?
1. Have some input on the design or opt to bend yer own sheath.
2. See the complete package ready to go out of the box as I designed it too my own liking.
The only problem I fersee with including customer input in the design of the sheath is the thinking "What if say I'll take it and request a sheath of XYZ type and I'm not happy with the sheath once it's completed."
This would be a valid concern but from my point of view I'll still be offering a guarentee and also if the sheath looked like the south bound side of a north bound mule I'd understand and have no ill reguards toward a decision not to take it at that point.
I feel perty confident that any sheath I might make would more than meet the expectations of said customer though.
Pards, Yalls help, thoughts, an opinions are doin me a great service in assisting me in findin my place in the custom knife arena and I thank ya fer lendin a hand
-Josh ;D
-
Josh - as one in the business of both IMO offer and either or when taking orders than do some spec pieces where you do the whole nine yards to please yourself.
If you want to talk about the business of period knives give me a call sometime 970-259-8396. If you get the machine leave a message and I'll call back (I've got unlimited calling)..
-
Chuck,
Thanks alot for offering your opinion ! I'll GLADLY take you up on the offer to give a call and surely do appreciate it !
-Josh ;D
-
Howdy Pards im back with a few new works the first is a filligree wallet that ive made to match the cell case i posted earlier
enjoy and thanks for all the encouragement
Cowboy316
-
here is also a pocket watch case i whipped up for the mail man He asked me saturday if i could make one to replace his old worn out one and then lastly a pair of one piece spur straps dyed in vinergroon
enjoy and happy tooling
Cowboy316
-
Cowboy that sure is some nice pieces of leather work. Sure like how colorful they are. Its nice to see some thing different. Keep them comming. KT
-
Nice work, Cowboy. Those pieces are very good. Your work is refreshing. Thanks for the pics.
-
Howdy c316
Nice work pard on the wallet and the watch and spur straps, how do you like that Vinegaroon, sure looks dark and rich, anyway your carving is top notch all the way, you're mail man should be a happy pard.
Regards
tEN wOLVES ;) :D ;D
-
TW
thanks for the kind words and i just love that vinegroon nice and easy but one draw back IT STINKS LOL
but its a nice black
Cowboy316
-
Howdy Cowboy316
Good work.
WC
-
TW
thanks for the kind words and i just love that vinegroon nice and easy but one draw back IT STINKS LOL
but its a nice black
Cowboy316
316, the smell will go away after a while
tEN ;) :D ;D
-
MW, Very nice looking knife and sheath!! Cowboy316, might fine looking carving!
I finialy got my boot knife done!! I started of with a cheap spoon, and then a plated spoon, and then one that had a little more silver in it. Because I wanted to make one of these just to see if i could do it, the stamping is just off the wall playing.
Later
ACE
-
Howdy Cowboy,
Those are some beautiful Wallets you are turning out! Very artistic! You should have a happy mailman also. Many thanks for sharing this with us.
Howdy Ace,
Very nice job on your Boot sheath! You did an excellent job of stamping. Pretty nifty for "off the wall playing". Thank you for sharing this with us
-
Howdy Ace,
I gotta agree with Johnny, a very fine looking sheath. Keep them coming!! ;D
-
Ace thats a very nice sheath. Like the designs. Spoon seems to have worked out really good. Good work but I dont want to hear that you dont have any spoons left to eat with. :D :P KT
-
Howdy Ace ;D
I see you got er done, it looks great, hows it feel in your boot, it's good to see you're feeling better, nothing like a good project to fix a pard up. Thanks for the look see Ace, keep up the good work ::) :o 8)
tEN wOLVES ;) :D ;D
-
Cowboy, that is some mighty fine work pard. I love that vingeroon, it shore does give a nice rich color and that watch case is great I am going to have to do one for myself. Been carrying a pocket watch for at least 30 yrs.
Ace, if that was just foolin around then we are all gonna be in trouble when you get serious. That looks just fine. Does it seem like the spoon will have enough spring to it ?
-
316 knows art work, Nice.
MS
-
Nice Wallets, 316!! Lookin good!
Ace, very nice stamping, and nice spoon work!
DM
-
It looks like you did a fine job on that sheath, Ace. That spoon looks like it should work nicely. Good stamping, too.
-
Nice dang wath pocket :) I get the feelin you sweated over that wallet coloring,make me nervous just lookin at it..Nice vintage look to it..
-
(http://) My latest rig. Sort of plain but GB the one I,m finishing up will knock your eyes out. KT
-
That looks great Terry. What are you using to get that color?
-
Kid , I haven't seen anything you have done that is "plain". That looks fantastic. I really like all the different things you did with one stamp. Can't wait for the next one.
-
KT, that looks great.Super tooling.Dave ;D
-
KT, I like yer rig, kinda reminds me of an Armidillo, leaning towards brown fer my next rig
Ya did good
MS
-
Thanks for the call Terry, I appreciate it
-
Kid Terico, you nailed it, that is one beautiful rig, I like everything about it , and I loves that buckle, what a classy bundle of gun leather this is. Well Done Pard ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Thanks TW and every one else KT
-
(http://) Just finished. Gun Butcher this ones for YOU. Hope u like it. KT
-
(http://)
-
Howdy Kid, :D
Boy howdy pard you're just like that energizer bunny, the way you are turning out rigs, I'm jealous,LOL, this rig is also beautiful, I love your thoughts on tooling, and your use of border stamping, you seem to be able to see ahead in your design, which can be a task for a lot of us, but you're able to pull it off with great results, WELL DONE Kid. ::) :o 8)
Regards
tEN wOLVES ;) ;D
-
TW I made it because GB likes this this type. I think I can use a new arm after this rig. Probley do a old one next. Had to give 4 rigs away this week to make room for the new ones. Wife wont let me expand into any more of the house or I wont make my 49th. anniv. in Jan. :P KT
-
That's a fine looking rig KT. I don't see any stitching on the belt. It may just be the picture though. Is that end stitched on? No matter what it is a heck of a rig!
-
JD belt and holster are fully lined and stiched. I recessed the stiching so it wouldnt stand out so much and distract from the rest of the rig. The ends are stitched on. I also dyed the thread to match. KT
-
TW I made it because GB likes this this type. I think I can use a new arm after this rig. Probley do a old one next. Had to give 4 rigs away this week to make room for the new ones. Wife wont let me expand into any more of the house or I wont make my 49th. anniv. in Jan. :P KT
Well in that case Kid you better listen to her, I can see how the arm would be tired, GOOD GRIEF that's a lot of hand and mallet work, by the way I enjoyed our talk the other day, and I'm happy to hear you are doing much better, you'll be back to your old self in no time.
Best Regards Pard
tEN wOLVES ;) :D ;D
-
TW Ditto and if any body figures out what my old self was PLEASE let me know. ??? >:( ;D KT
-
Kid, that rig may be plain in your eyes, but for me it looks just right. Nice work. The brown rig is a great color. The design looks nice with that. More nice work. The sheath is very cool. Even more nice work. :D
-
Thanks Marshal KT
-
You hid those stitches real well. Did you did a particularly deep stitch line? Is there anything else you did to hide the stitches?
-
JD normal stitch line. Antiqued the line and dyed the thread to match . Used shoe hammer to flatten the thread. Hope this helps. KT
-
Howdy Kid,
Just looked at the last two rigs you have posted. Simply outstanding! You mentioned that one of them was "plain". Well I'll tell you Kid, I'd love to have the skills to make a rig that "plain". As I've said before, your work is a genuine pleasure to look at. Please keep em' coming.
-
Hey Kid, you ol dog, you did it again. You just keep impressing me. That is one Sweet looking rig no doubt about it.Do you dream your stamping patterns? And I love the full width billets. You just never cease to amaze me.
Tell me about the sheath is it covered? what weight of leather etc....
I am honored beyond words that you would sort of dedicate a beautiful piece of work like this to me. Thank you, GB
-
GB Cant help you. It was made for me by Chuck B. IT is very heavy. All I know is he said it was made of Beaver. KT
-
Well Howdy Boy's
Been a while!!
All I can say is AWESOME!!!!!!!!!!
Lots of really great work here!!!!
Kid Terico, I thought I was a leatheraholic...thanks for making me feel better!
You have and make some great leather...wonderful collection!!
Finally talked the wife into wearing Cowgirl Cuffs.
Coarse then had to make her a pair to match her B-western back-brace rig.
Keep up the good work boys.
See ya on the trail
BH
-
Howdy TK and BH, :)
Terry, both of those rigs are AWESOME!! I have to admit I realy like the stamping pattern on the first rig :o :o Is that stamp a Barry King Crescent Shell? If so, is that a # 1,2,or #3? Man that is a nice stamp!! Thanks for sharing!
BH, Very nice arm cuffs!! I plan on making me a pair latter this winter! Thanks for sharing!
Later
ACE
-
Howdy Bad Hombre
Nice cuffs pard, I'm sure the wife will like them, thanks for sharing
Regards
tEN wOLVES ;) :D ;D
-
Hey Bad, good to hear from you. Those cuffs are very well executed. Spot placement and the dye job are perfect.Great job, that ought to score you some points ;)
-
BH nice cuffs. Its great to see more people showing there leather.Good work. KT
-
BH, those cuffs are really nice. Those are beautiful and the conchos really dress them up nicely. Thanks for the pics.
-
Howdy BH,
Excellent job on your wife's Cuffs! I'll bet she is real proud to wear them. Many thanks for sharing this with us.
-
I sure enjoy the leather on this here thread, got me motivated fer sure.
Finally got my new Man Room done up and organized, time now for some leather projects.My knife needs a new sheath, recon I'll start there.
Happy tooling Pards,
MS
-
Here a fringed rid that I no longer have Made for my leathers but I decided the fringe was not long enough. Made another one that I liked but my grand son wanted it so now I have to make another. KT
-
Howdy KT, :)
That is a AWESOME looking outfit!! And the cuff's are out of this world!!
Thanks for sharing!
Later
ACE
-
That is a beautiful setup Kid. I like the less is more style of the carving you did on the rig.Amd Like Ace said the cuffs are first rate. I can honestly say I haven' seen anything that you have done that I didn't like.
-
Supper job Kid, making clothes is a whole different game, looks like you aced it, your gun leather and those beautiful cuffs really finish it off nicely, thanks for sharing Pard
Regards
tEN wOLVES ;) :D ;D
-
TW I didnt make the cloths. One of the indians of the same tribe as me made it. She is no longer around else I was going to have her make one foe my wife.KT
-
KT & BH
Good lookin work.
WC
-
Thanks pards for the nice words. KT
-
(http://)Frend of mine wanted something for his wife.This is what I came up with. Just finished it. KT
-
Beautiful work KT as usual.Dave ;D
-
Thanks Dave. KT
-
KT, you keep outdoing yourself, this is another beautiful rig, it's rich and classy rolled into one, your use of stamps and beader lines is really nice, and those star spots in brass finish it off , ::) :o 8) WELL DONE Pard. ;D
Regards
tEN wOLVES ;) :D ;D
-
I'll tell you what Terry, I think I need to fly back to Minnesota and take some lessons from you! I really like your stuff
-
TW JD thanks. JD if you come , bring your better half and I,ll wine and dine you. ;)KT
-
Well here we go again. WOW, You just keep coming up with beautiful rigs. I can only echo what TW said. Your style shows thru on every rig you make and its one of a kind everytime. I would hate to answer the question of which one I like the best as they are always my favorite. I only hope I can keep progressing to the point where my work has a style of its own like yours.
-
GB thanks. You already have a style of your own. Dont push it just let it happen and be happy with your work because its really good. My work might be different but not better than the rest of the guys. Thanks again. KT
-
Howdy Kid,
Wow! More beautiful Leather from your workshop. The rig you made for your friend's wife looks straight out of the pages of "Packing Iron". Many thanks for sharing your work with us.
-
Very cool, Kid. I like the big rosette with the center spot. Nice work. Good color on it, too.
-
Howdy KT
That is a good lookin rig.
WC
-
Thanks to all of you. KT
-
Howdy Boys
Thanks for the kind words boys!!!!
Kid, that is another fine rig...you have a great emagination!!!
Here is another idea ta throw around...I do a lot of these!!!!
Fancy lever-wraps...of coarse there made right on the lever.
I use EVOO (a good amount on the inside) and veg-tan leather.
I've removed these after 8 yrs and no rust or damage to bluing.
BH
-
Nice looking wraps BH, and the guns aren't bad either.
Regards
tEN wOLVES ;) :D ;D
-
Howdy KT & BH,
KT, realy a super job on the stamping of that rig, truely a nice looking period rig!!
BH, That is the nicest lever wrap I have ever seen!!! Only a leather worker can realy appreciate the work that you did on it!!
Thanks to both of you for sharing!!
Keep the leather work coming, Pards!!
Later
ACE
-
Those wraps are the cleanest looking ones I've seen. Very nice design. Thanks for the pics.
-
I agree, some of the nicest wraps I have seen.Dave ;D
-
BH ,outstanding work , nicest wraps I,ve ever seen KT
-
Those wraps are outstanding!
-
(http://) Here are a couple pictures of a rig I,m making to go with my fringed elk skin leathers. Its a strong right side drop with a RH cross draw. Full contoured belt. This holster is done with belt and other holster in the making. KT
-
Kid , that is going to be another winner. You are like that little energizer bunny ;) ;D
-
GB I think my batteries are a lot older. ;D KT
-
Howdy Kid Terico
Boy howdy, you just aren't going to slow down for nothing, LOL, KT like GB said, you're like a little ENERGIZER , this is another great looking rig, looks like you were thinking outside the box on this one too, you really have a gift for design, I've gotten so I can't wait to see what you will come up with next, keep up the great work pard. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
GB, I think he uses Nicads and he has that recharger cooking all the time.
-
TW YOUR a HOOT. :o KT
-
Well, another very nice rig, Kid. The inset is most interesting. I wouldn't have thought to carry that into the belt. Innovative, to say the least. Good work.
-
MW THANKS KT
-
Howdy TK, :)
I would have to agree with the other pards that have posted! I realy like the design and all around layout, the inlays and the spot design just go hand in hand!
Great Job!! Keep up the good work!
Later
ACE
-
Thank Ace get better so u can make one. KTs
-
TW, I think you are right about the KID's batteries being Nicad. He says they are really old batteries but if they are then they must have been built when things were made to last ;) ;D
-
A couple of new pieces:
Frontiersman holster heavily aged with a rawhide fix-it and beadwork...
(http://www.wrtcleather.com/1-ckd/1-2009/holster-frontiersman-091116.jpg)
Muzzleloader shooting pouch...along with a couple of new knives which still need their sheaths...
(http://www.wrtcleather.com/1-ckd/1-2009/Pouch-hunting-wilson.jpg)
-
Dang Chuck! Where did you dig up the fossil holster?!?! That thing almost looks rotten, with all those cracks. Very good job of replicating age.
Beautiful work on both the holster and the bag. Knives look good too.
DM
-
D M the holsters mine. Chuck sent it yesterday. Here is a pict. of the belt that goes with it. I already have it. Chuck made it also. Aged also. KT
-
TW, I think you are right about the KID's batteries being Nicad. He says they are really old batteries but if they are then they must have been built when things were made to last ;) ;D
GB, I think you're right them batteries had to have been made yesteryear ;D ;D ;D
tEN wOLVES
Chuck more awesome work from you and your shop, they really have that aged look to them, and that's a cool possibles bag, is that Elk ? the leather on the holster looks old and cracked, you're the man when it comes to aging leather, it really looks authentic, and those knives are hum dinger's too, thanks for the look see. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
G B and T W was that a shot? I think I heard it zing BY. KT ;D :P
-
KT, you really have a diverse taste in Gun Leather! That holster is really an amazing piece. Personally not my style, but I sure do appreciate the workmanship involved.
Chuck, the knives are downright incredible, as is the bag and the holster.
-
JD I wanted a holster and belt that looked as old and beat up as me. >: :'( KT
-
Hey Chuck, so that my comment is not misconstrued, I meant rotten in a really good way! ;)
KT, that is a nice addition to your belt. Will look really good together!
DM
-
Chuck that is some absolutely beautiful work on the leather and the blades. You have a very unique style that I really appreciate.
Kid, congrats on adding another winner to your stable.
Well here is my next offering, and Chuck is a tough act to follow, but here it is anyway.
the blade is 6 3/4" long and overall is 11"
The sheath is 8-9 oz covered with buckskin and beaded then dipped in pecan dye. It is still a little wet so I am hoping the sun will shine tomorrow and lighten it up some.
-
Chuck, great work as usual,GB, nice looking knife and sheath.Dave
-
GB nice knife and sheath. Great color on sheath. Like it. Keep them comming. GB u noticed I had no problem following Chuck I showed one of his own. Smart Huh? ;D ;D KT
-
Gun Butcher, beautiful work pard, the knife and the sheath are awesome, I didn't know you could do bead work, and you did a great job of it, really nice design, the center reminds me of a snake, the knife looks top notch, thanks for the look see, and keep them coming.
Regards
tEN wOLVES ;) :D ;D
-
Doggone, Chuck, that aging you do is really something. Very nice. I like the knives and that beautiful bag, too. Fine work.
Kid, that belt he did for you is reallly nice. He done ya good. ;)
GB, I like that sheath. The beadwork is really nice. Very suitable for that knife. Looks good.
-
Howdy KT,
I'm just amazed at the wide variety of looks and styles that come out of your workshop. They are all different and extremely well done. Everything I make seems to look the same. Many thanks for sharing and please keep em' coming.
Howdy Chuck,
Thank you for sharing another work of art and museum piece with us.
Howdy GB,
Beautiful job on your Knife and Sheath! It has a great look to it. You can be very proud of your work. Thanks for sharing it with us.
-
Thanks Pards, I really enjoy beadwork. It will really teach you patience especially after you stick yourself a few times :o ;) ;D
-
GB,
Great job on your knife and sheath Pard . I really like that you chose a hand filling piece of stag and tapered the sides in the front for good looks an erogonimics
Chuck, Your work is 100% pure inspiration ! Thats about the best compliment I can give a fella. Only a few makers hit the nail on the head every single time an yer one, IMHO. Haven't given a call to chat period knives but I put your number in my phone so I wouldn't lose track of it. I never know when a good time to call is without interupting work, supper, or sleep, LOL.
KT, I'm gonna have something post worthy very soon ;) probably this evenin . Let me know if you want me to get pics up or wait for a suprize ?
-Josh ;D
-
Howdy GB,
Very nice looking knife and sheath!! You realy make some nice knifes!!! The bead work looks awesome, no way could I ever do that type of work, keep up the great job.
Later
ACE
-
Howdy Pards,
Finally got the shoes fer this'in done. Glad I waited fer some customer input on the style fer this sheath because I prolly never would've went for it, bein my first attemp at a rawhide sheath an all. Kid Terico wanted Rawhide so here she is . Please let me know what yall think...
(http://i570.photobucket.com/albums/ss147/joshdabney/Rawhidesheath001.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/Rawhidesheath005.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/Rawhidesheath006.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/Rawhidesheath008.jpg)
Appreciate all comments, Josh ;D
-
Josh I think it absoutely Great. The sheath is just what I wanted , couldnt ask for more. Same goes for the knife. Thank you. So every one knows Josh made this for me. :) :D ;D KT
-
Josh, that sheath is the perfect compliment to the knife, they both look great.
Kid, If you keep this up you're gonna need another room. ;) ;D
-
GB pretty soon I,m going to do what TW did and show my knife collection with a story on each on. You know like Had to cut out wifes beer to get this one and moved to motel for 6 days for this and took out second morgage on house for this one. ECT ;D ;D ;D KT
-
Now I know you are from Minnestoa. You didn't say anything about cutting out your beer ;D ;D 8)
-
I saw the knife as he was progressing with it , but tonight Josh came over and I saw the sheath.He did an awesome on it.Dave ;D
-
Josh, that sheath is perfect for that knife. The color really looks right with the handle. The brass spots carry it further. The buckskin & fringe really set it off. thanks for the pic.
-
I love that knife, and was hoping the sheath would look something like that. Great job.
-
Howdy Josh,
Beautiful job on your Knife and Sheath! It has a real authentic period look to it. Many thanks for sharing it with us.
-
Well Josh, you did a great job here, and I know Kid Terico will love it, for your first attempt at this style sheath, you really aced it, thanks for the look see. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Howdy Josh, :)
Great job on the knife and it sheath!! I like the way they compliment each other!! Great design work!!
Thanks for sharing.
ACE
-
Thanks alot fer all the compliments Pards ! ;D
I'm pretty pleased with how it turned out and it seems to pull off the period look successfully which was my main goal. She's in the Pony Express's hands now on her way to KT.
KT- I fer one would love ya to do a "Show my collection" post in the fashion of TW with a bit of a yarn splainin each gals history.
Thanks once again Pards ;D
-
Josh I would love to but could NEVER follow TW. His stories were just GREAT. Great history. All I can say is I,m very lucky to have a collection Made by ALL of of you Great knife and leather artists.Thanks to all of you. My Next one will be in a CLASS of its own . Will be made by Dave Cole and joint venture on the sheath by Dave and Josh. KT
-
Howdy All
KT, thanks for the kind words pard, but I'm sure you could tell a story or two, but either way you're going to have one fine collection, of all these wonderful knife smith's, can't wait to see the next one, and that sheath by Dave and Josh should be a site to see, can't wait to see that either, there is something special about a one of a kind leather sheath made by folks you know.
Regards
tEN wOLVES ;) :D ;D
-
Nice Work Josh! I have always wanted to make a knife. I have a bunch of hoof rasps laying around I want to play with. ;D
I was finally able to find some pic's of my earlier work.
-
Howdy CK,
Beautiful work! That is a great look you have created. I sure look forward to seeing more of your leather projects. Many thanks for sharing this with us
-
Howdy CK,
WOW!!! AWESOME leather work!! :o :o Your work is right on!! Just like Johnny said, great job!!!
Keep those nice looking leather goods coming!
Later
ACE
-
CK sure like your leather wok. Those belts sure are something and the holster is great. KT
-
Howdy CK,
I like your holster, I guess you could call me a spot man, nice color too, the two belts are beautiful, the gals look like they wear them with pride too, thanks for the look see. ::)
Regards
tEN wOLVES ;) ;D
-
Thanks Pards!
It's my take on the Ladies bronc buster belt. I call them Prairie Belts.
The turquoise stone is in a rawhide set I made then sewed to the insert. I looked it over to decide how I wanted to mount it and noticed the black in the stone formed a "T". With the Gals' alias being Turquoise Tess, it worked out perfectly. ;D I make a narrower belt for the Ladies that are , shall we say, a bit more height challenged so it doesn't look like WWF trophy belt on them. :o ::)
Canelo Kate is after me for a carved belt, I suppose with Christmas and her birthday coming up next month........ ;) 8)
Ten Wolves, I like spot work too.
Safe trails,
CKid
-
CK, that holster is nicely balanced looking. Good job. I like those belts, too. Especially the one with the turquoise inset.
-
CK, that spotted holster has nice color to it, what did you use if you don't mind me asking. ???
tEN wOLVES ;)
-
10 W,
I'd bet that all of us on this board "don't mind"! Just ask their wives. :o ::) ;) ;D
-
;D ;D ;D ;D
-
Ten Wolves,
I don't mind, at all. Ask Canelo Kate. I'm her 30 year "work in progress". :o ;D
Oil, then Fieibing's med brown spirit. I dunk both oil and dye. Nice 'ol timey look that way.
Safe trails,
CKid
-
CK, great looking belts and holster. You do some mighty fine work.
-
I have to agree, Nice work CK. Dave ;D
-
First time ever, I have a Sidekick who wants me to create a 12ga ammo belt for him. He liked the MontanaSunset rig I made and he wants a match to it. :o
A 100ert years doing leather, I've never made a shot shell ammo belt...Need a reseepee fer the spacing of the loops.
I have the 44-45's, just need the 12ga.
I sure like the leather on this web site. Just plain Awsome.
Thank you,
M.Slick
-
CK, the oil and dye work well together, I do this myself at times, you can as you say get a nice ol timy look that way, thanks for your reply pard.
Regards
tEN wOLVES ;) :D ;D
-
First time ever, I have a Sidekick who wants me to create a 12ga ammo belt for him. He liked the MontanaSunset rig I made and he wants a match to it. :o
A 100ert years doing leather, I've never made a shot shell ammo belt...Need a reseepee fer the spacing of the loops.
I have the 44-45's, just need the 12ga.
I sure like the leather on this web site. Just plain Awsome.
Thank you,
M.Slick
Howdy MS, here is the link to our Fac/and how too's section, you will find everything your looking for here,
http://www.cascity.com/forumhall/index.php/topic,9631.0.html
Regards
tEN wOLVES ;) :D ;D
-
Thank you Ten Wolves, I'm getting the picture now.
Even saw my old Frin Brazos Jack on here, what a surprise.
M. Slick
-
Hi pards, well I finally got KT's Bowie done and Josh is finishing up the sheath, which I'll show later.The knife has an 11" Damascus blade ands is 16 1/2" long.The guard spacer and buttcap are also damascus and I added a stipled copper spacer in front of the antler.This one was alot of fun and it was a blast collaborating with Josh.I'm sure you'll see more collaborations.Dave
Enjoy it KT
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/terrybowie1.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/terrybowie2.jpg)
-
Dave, Beautiful work pard, that is one Nasty looking bowie, the cap is so rich looking, it looks like it's surrounded by walnuts, and the crown is a perfect touch to tie it all in, Now we'll be waiting on pins and nails for Josh to show us the sheath for this beauty, that Kid Terico is one lucky pard, thanks for letting us have a peek. ::) :o 8)
Regards
tEN wOLVES ;) ;D
-
Thank YOU Dave for a outstanding job. This is the knife I said would be in a Class by it self and I wasn,t wrong. I,m not going to say anythig about the knife because it speaks for itself. Cant wait to see the finished sheath. Thanks again. Now u can think on the next one. :) :D ;D KT
-
(http://) Well everyone I finally got my hides. The batteries are charged. ;D This is a rig I just finished 5 min. ago. I am donating it to the church for a raffle. Last years got $650.00 . I think this one will do better. Enloy. KT
-
Howdy Kid Terico
Man O Man, your are the ENERGIZER, this new rig is down right BEAUTIFUL, your tooling and lacing are top knotch, even the color looks good, so what are you going to do tomorrow,? I don't think they will have any problem getting even more this year on this rig, none of the Churches around here would think of using a holster in a raffle, just a difference in where we live.
Thanks for sharing KT, can't wait to see whats next
Regards
tEN wOLVES ;) :D ;D
-
Thanks TW. The reason I think we will do better is a lot of the men asked me to make something they could get for there wives. We had shotgun and rifles raffled off, anything to make money. KT
-
Love that rig KT, man you can knock them out.Dave ;D
-
Thanks Dave, sorry about the post under knives and sheaths. My fault. I set it right. Thanks Terry
-
Howdy Dave,
My compliments to you on creating a fine work of art! You have a real talent there. Thank you for sharing it with us.
Howdy Kid,
Another beautiful Rig from your workshop. Your designs and workmanship are fantastic! I'm sure the lucky raffle winner will be very proud to wear it.
-
David, That knife is AWESOME!!!! :o :o Man O Man, You did a KILLER JOB on KT knife!! I think that is one of the nicest Damaus knife I have ever seen!!!!! I hope next year some time I will have you make me one like that.
KT, David did you right on that knife!!!
That rig is AWESOME, great detail in your stamping!!!!! Is the church doing a raffle?? If so I bet them will sell a ton of tickets for that baby!!!!
I need to get my butt in gear and make something!! You guys are doing some great work, Keep it up!!
Later
ACE
-
Ok pards, I said I would post the pics of the knife and sheath together when Josh completed it.He finished it up today here and we were able to get some pics.I couldn't be happier myself and its a blast working with Josh.Enjoy.Dave
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/joshdave1.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/joshdave2.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/joshdave3.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/joshdave4.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/joshdave5.jpg)
-
Josh and Dave I,m not going to say how much I like it because the price might go up on the next one. ;D ;D It is absolutely fantastic. Josh u did a GREAT job. I couldnt be happier. It is so much fun working with the 2 of yous. Cant wait to get the next one started. THANK YOU. KT
-
Very impressive work guys on both the knife and sheath!!
-
Howdy Dave & Josh
You fellas are doing some Awesome work, I've already told Dave what I think of his knife, and Josh your sheath is Fantastic, you really are an artist, beautiful design on this sheath, and the way you adorned it with fringe and beads really put this sheath over the top , your lacing looks period too, WELL DONE Pard. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
(http://) Well I finally got this rig finished.KT
-
Well, I can see I'm in pre-school when it comes to leather work, and that sheath is PHD work for sure!
TKid, that is another great looking rig. How wide is that belt?
-
Beautiful work there KT.Dave
-
JD 3-1/4 with a 5-1/2 in. counture to the belt. Takes a lot of leather. KT
-
Very nice Kid, you're really cranking them out ::) :o
tEN ;D
-
That knife is really striking (no pun intended), Dave. Very nice work. Josh did a really good job on that sheath. Very suitable for that knife.
Kid, that donated rig is also a beautiful one. Someone will surely enjoy that. Be sure to tell us how much it brings at the raffle. The other one is really nice now that it's had the finishing touch. Darn good work.
-
Very nice knife and sheath. The Buscadero rig is cool too, but at half a cow apiece I don't think I'd make many of them. ::) ;D
The donated rig is very nice too and I imagine your church will benefit a good deal from your donation.
I really enjoy seeing everyone's work! :)
All of you have a safe and happy family Thanksgiving tomorrow!
Safe trails,
CKid
-
To all of you have a nice Thanksgiving and drive save. Thanks for all the nice comments. KT
-
Howdy TK,
That is another AWESOME rig!!! :o :o You sure have a very creative eye!! The fringe and the inlay colors realy do set that a rig apart from others, you did a great job and who ever gets it will love it!!
Thanks for sharing!!
ACE
-
(http://) Heres one I made to day for my 1911.
-
Wow, Kid. That one has nice lines. Beautiful work. The strap wrapping at an angle looks good.
-
A mighty fine looking holster!! ;D
-
G'Day Marshall,Thought you might like this one.Feathers
-
Here's a couple of new shooting bags - same basic pattern, but each with a "difference":
(http://www.wrtcleather.com/1-ckd/1-2009/Pouch-hunting-wilson.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/pouch-pepper-0912.jpg)
Since I had the second bag all setup to photo I figured I'd shoot a couple more new knives - both with coyote jawbone handles - along with the two knives in the first pic above I've got four to put clothes on.....
(http://www.wrtcleather.com/1-ckd/1-2009/cr-35-coyote-knife-0912.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/knife-morin-coyote2-0912.jpg)
and last but not least a new smoak axe.........
(http://www.wrtcleather.com/1-ckd/1-2009/cr-33-pipehawk-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/cr-33-pipehawk-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/cr-33-pipehawk-3.jpg)
Tomorrow is back to beating on a couple of gun rigs, a belt bag, and those new "clothes".........
Hope ya'll had a Happy Thanksgiving and keep up the good work I keep seeing here.........
-
Cool rig, feathers. It looks like the straps are cut to be parallel to the belt. That's an interesting touch. Nice work.
Chuck, those bags are really nice. Those knives and hawk are cool, too. Thanks for the great pics.
-
Chuck,
Beatiful work as usual ! You must have the patience of Jobe to do all that beading, but boy is it ever worth it !
Thanks alot for sharing.
-Josh
-
Howdy Fella's, :)
Man sure is a lot of nice stuff being posted!!
TK, Super looking 1911 holster!!! Feathers, the rig that you posted shows people it doesn't have to be stamped or carved to display classic lines. Your rig looks Great!!!!
Chuck, as per the norm, you work is totaly AWESOME, your work is outstanding it shows your deep artistic ability to create period correct memobilla from the 1800's. I only wish I had the vision as you do! Thanks for showing your goods.
Keep up the good work Pards!!!!!!
ACE
-
KT, very cool ,like the angled strap as well.
feathers very classic clean rg.
Chuck ,awesome work as always.Dave :D
-
WOW, where do I begin,
Howdy All
I hope every one had a wonderful Thanksgiving, Kid Terico, your 1911 holster is Dynamite, I may have to make one like that, if you wouldn't mind, nice lines and design, ans as always your stamping is perfect, and the color is beautiful, WELL DONE Pard, ::) :o 8)
Feathers, you did a really great job on this rig, the leather looks rich and supple, and your stitching really stands out nicely, nice color too, your guns look like they fit perfectly, you even did a nice roll out on the top of the bucket, WELL DONE to you too. ::) :o 8)
Chuck Burrows what can I say, your work is beyond words, it's always a pleasure to see, thanks for sharing
Best Regards All
tEN wOLVES ;) :D ;D
-
Feathers, nice looking rif. Like the angled holster straps. Great design.
TW I would be honored if u made one like it. Shows u really like it. KT
-
Feathers, nice looking rif. Like the angled holster straps. Great design.
TW I would be honored if u made one like it. Shows u really like it. KT
It's a deal Terry, I'll see what I can come up with, Thanks
tEN ;D
-
Chuck. I like how the beadwork on the pipe looks like Indian corn. Cooool.
-
(http://) Well Pards heres something a little different for a different revolver. Wife just bought another conceiled permit piece. Its a Tarus titanum .357 magnum with heavy loads. It has a vented barrell 3 1/2 in. Also it is a seven shot revolver. She wanted something different for a holster. This is what I came up with. What do you think? KT
-
That looks like a pocket or purse holster. It looks like it will do the job really well. I like the way you worked around the stitch line to have the skirt a separate entity from the pouch. Nice.
-
If that's her carry gun, you'd better behave yourself! Nice job on the holster
-
If that's her carry gun, you'd better behave yourself! Nice job on the holster
AMEN on that :o
Nice looking Kid and it is definitely different, but like JD said if she start to pull it you better be fast. :D ;D
Regards
tEN wOLVES ;) :D ;D
-
G'Day Marshall,Thought you might like this one.Feathers
Howdy Feathers
That is a very clean rig.
WC
-
TW and JD I,m not that stupid. I,ve got her believing your the bad guys. ;D ;D Thanks Marshall and the rest of you . KT
-
TW and JD I,m not that stupid. I,ve got her believing your the bad guys. ;D ;D Thanks Marshall and the rest of you . KT
If I should ever come for a visit, make sure your take ALL THE BULLETS OUT OF HER GUN.......... ::) ???
tEN ;D
-
Hey KT,Is your last name Calahan? Dirty HARRIETT ;D ;D ;D
-
Feathers your close. It starts with C CHICKEN. ;D KT
-
I split off some posts with AC's pics of the stuff that was his dad's and moved them to the "Great Stuff to show ......" thread.
http://www.cascity.com/forumhall/index.php/topic,29614.0.html (http://www.cascity.com/forumhall/index.php/topic,29614.0.html)
-
Dave and Josh, you guys are going to be a tough team to beat, beautiful work on the knife and the sheath.
Kid, you just keep cranking them out and every new one gives me more inspiration.
Chuck, I am sure you have heard every word of praise that there is in the english language but just like Dave , Josh, and the Kid, you continue to raise my aspirations and give me new Ideas.
Feathers, that rig would appeal to anyone who likes the true look of the Old West. Very, very nice work.
I had no Idea that I could be drawn to so many different styles until I started seeing the work of true masters.
-
Howdy Fellas,
Sure has been some ral nice leather showed here lately!! Here a while back my friend JM showed me a holster that he had just made, I told him how much I liked it, and that I would like to have that pattern. Saturday was a nice day and I didn't feel to bad, so I went out to the shop and got the pattern out that JM had sent me, I dug around and found a peice of leather that was big enough to lay out this pattern, i finished it late Saturday. I don't know what I did but, I guess I pulled a muscle under my left arm because it hurts every breath I take >:( >:(
Thanks Johnny for the pattern!!
Se what you all think?
Later
ACE
-
GB, thanks for the kind words.Ace, you did a wonderful job on that holster.Dave ;D
-
Nice work Ace, nice design it has good balance and the extra drop from the belt will make drawing the gun out much more easy, you did a dandy job with the spots and conchos, and that new stamp adds a good looking and different border, I can see you used the natural dyes to get your color, and it looks great, that was nice of Johnny to send you his pattern, Johnny has been a helping hand to a lot of us, and a pard to ride the trail with.
Regards
tEN wOLVES ;) :D ;D
-
Just got back from Thanksgiving in Minnesota with the grand kids and I see some great leather posted. My compliments to everyone.
Ace,
You did an outstanding job! You are very creative and your work shows it. We are all very proud of you and your fine work. Many thanks for sharing this with us.
-
Ace great job. I like very much. Keep em comming pard KT
-
Thanks everyone! Johnny I realy like that pattern. I think I will make a modifacation to it and make a cross draw to go with it ::) ??? ::) maybe?? I find that if I feel good enough to do something I realy don't have anything to make other than a set of saddle bags, and I don't think I will be able to work on them unless the holsters I have on ebay bring enough to get some leather. I might make a knife sheath or I have been wanting to carve a belt, but I am uncertain what style to make?? I am going to post a pic of a holster that is on ebay, that I realy like, tell me what you think of it??
Later
ACE
-
(http://) Heres one I started 5 weeks ago and lost interest in. Today I decided to finish it. KT
-
Ace, that holster is looking great . Everyone you do gets better. You keep it up and you will be giving the rest of us pointers on how to do it.
Kid, as always that is a first rate rig.Your stamping always intrigues me. I keep looking at the picture to try and figure out how many tools you used and get a feel for how you put them together. It really seems to be helping my projects.
-
Howdy Kid Terico
Well you did it again, I like it, and that rosette is fantastic, you had to have put some thought into that, and again your use of stamps and design, really shin through, Well Done Pard, keep them coming. ::) ;D
Regards
tEN wOLVES ;) :D ;D
-
Ace where on ebay is that rig listed? Thanks KT
-
I looked for it under Western Holster, but couldn't find it. I still working on carving roses, so I'll take every opportunity to look at some
-
Howdy KT,
Another beautiful rig from your workshop! The stamping itself along with the layout and design of the stamping are first class. Many thanks for sharing your talents with us
-
Many thanks to all of you for coments. JD I,m one up on you. I have Dave Coles wife making ten of her leather roses for my wife. The ones he posted. They are beautiful. Dont have to carve. KT :) :D ;D :)
-
Like the holster, Ace. Did you line it?
-
Very cool Terry, that's a great idea. Those leather roses look great. I finished the guitar strap with the carved roses, but I didn't like the final result, so I'm making another one. By the way, that last holster looks great. Man, you are a stamping machine!
-
Howdy to All, :)
KT,
AWESOME Rig!!!! :o :o Excellent job on the stamping!!! Great design!!! What else can I say??? Keep them coming! KT, I think that rig has sold, I tried to look at it again last night, and it was gone!
GB, Thanks for the kind words.It is getting harder to make new stuff, I have all the leather goods I need.
Santee, I didn't line that holster, I was bored out of my mind, and just grabbed the pattern that Johnny sent me and before I new it I had cut it out and was working on it. Have you made anything lately??
Later
ACE
-
(http://) Heres one I started 5 weeks ago and lost interest in. Today I decided to finish it. KT
Okay, here you have a beautiful new gun rig, expertly done and with a great design, but I have to ask: why the beat up old brass buckle? It detracts from the wonderful job you did on the leather.
-
Couldnt afford ant thing else. :( :o :-[KT
-
An honest man. Diogenes can put his lantern away at last. ;D
I got an oval white bronze Will Ghormley buckle looking for a home. If you haven't bought me anything for Christmas yet................!
(HEY! I can dream, too.)
-
Forty Rod I will probley change it just for u. >:( KT
-
(http://) Forty Rod I hope your happy. I was going to give it to you for xmas but since you dont like it. :) :D ;D :-\KT
-
(http://) Forty Rod I hope your happy. I was going to give it to you for xmas but since you dont like it. :) :D ;D :-\KT
I reckon it's too late to apologize, huh? Damn, when will I ever learn to keep my mouth shut. :-\
Looks great with the new buckle.
-
Let me know what size box that has to go in,i got a small tree this year,but i got prunin shears too :)
-
This is one I did just to see if I could.
The knife is 8 1/2" overall with a blade of 4 1/4". Made from a file that was annealed and rehardened following the tips that Josh Dabney gave me. Thanks again Josh.
The sheath is 7/8 oz with cutouts and sporting my new, made by me, Makers Mark. The Broken Diamond T.
Hope youall like it and if you don't I hope you will tell me why. It really does help.
-
GB now that I like. Good design,nice color Very different. I REALLY like it.. Great knife also. My type of knife and sheath. KT
-
GB, nicely done on both pard.Interesting design on the sheath and I like it alot.Keep up the good work.Dave ;D
-
Howdy Gun Butcher :D
That is one Narley looking knife with a capital N, I love it, and that is also A a very different looking but cool sheath, I likes one of kinders.
Well done pard ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Thank you all for the compliments. I just wanted to try the cutouts on the sheath and fitting the guard to the sheath the way Dave and Josh did on that damascus knife. It ain't as easy as it looks. Once I decided on the guard I thought it would look good to carry that shape thru to the cutouts.
Guess this is one that worked :o
-
GP I really like the look of the knife and the sheath, and it doesn't appear easy to me at all!
-
KT, Ace, GB
Good lookin work all of you.
WC
-
Thanks cowboy KT
-
Howdy All
Finally finished the Black Rig for the Ebony Set
WC
-
WOW , WC that is really fine you did a beautiful job on that rig. Your carving is just exquiste.
-
C...I like that one...nice job compadre
-
GB,
Thats a fine lookin skinner ya got there Pard. I'm lovin the guard shape and how you carried the design into the sheath. I will admit that I'm still not sure about seeing the blade through the front of the sheath but I do like the cutouts and I'm thinking your ready to go for an inlay on the next one ;D
Here's a tip for fitting the sheath to the guard. When assembling the knife you should have the front side of the guard already to the shape ya want'er. Before assembling the knife trace the guard on a manila folder. Finish knife. Carefully cut the folder out and fit the folder to the guard, Now you got yer'self a pattern fer the top of that there sheath.
Glad I could be of assistance to a fellow knifemaker ;D ;D ;D with the file advice. I'm always open to share any knowledge I may have with others. Jus figure some other Pard gave it to me so I might as well give to another if'n I can.
Cowboy, B-E-A-U-T-F-U-L carving Pard ! Clappin and droolin in the peanut gallery ;)
KT, Haven't commented on your last few holsters. I'm WOW-ed as is always the case with yer work. You seem to have no trouble designing amazing tooling patterns and meticulously carrying them out. Dye job.... Out of the park. Let's face it, it's just durn fine work that gives the rest of us a goal to shoot for with our own work.
-Josh
-
WC great job. I can appricate all the time you put into that rig. Great lay out and design. KT
Thanks Josh
-
Howdy GB & WC,
Beautiful work you have posted! A genuine pleasure to look at for sure. Many thanks for sharing this with us.
-
Howdy GB & WC, :)
GB, that is a killer knife!!! :o That knife looks like it would be something a Buffalo hunter would wear!!! Very period looking!!!!!That knife would make anyone proud to have it on there belt!!!
WC, OUT OF THE PARK!!!! :o :o :) :) Just another fine example of the type of work that you do!!!!!! I only dream that some day I can come close to that type of work!! ( I better keep dreaming)The detail is mind blowing, it make me proud that I am your friend and have had the pleasure of getting a personal lesson from you!!! I know for fact that the person that gets that will be showing it to every one they know!!!
Thanks for sharing fella's!!
ACE
-
Howdy WC, :D
Your new rig turned out great, after seeing the holster and sheath in person, I can really appreciate the belt holster and sheath all together, and that buckle really brings it all together, you're going to be one sharp looking Cowboy wearing this, OH, and you make me proud pard.
tEN wOLVES ;) :D ;D
-
That design is cool, Ace. I like the spots on it. The drop and cant are nice. Good job on that one.
I am going to post a pic of a holster that is on ebay, that I realy like, tell me what you think of it??
This rig is very balanced looking. The floral pattern is a good look on it. You'd do well to make something like this.
(http://) Heres one I started 5 weeks ago and lost interest in. Today I decided to finish it. KT
This one is great. I really like the rosette on the strap. Very beautiful.
Hope youall like it and if you don't I hope you will tell me why. It really does help.
Nice sheath for a nice knife. You carry the line of the guard down the front nicely. The knife itself is most interesting and very functional looking, much like a skinner. The thing I like most about your sheath is that it carries the personality of the knife through the whole thing. Yep. I like it.
Finally finished the Black Rig for the Ebony Set
Wayne, your tooling is just beautiful. It makes a good look. The black works well with that pistol. I really like the three-tone logo buckle. It becomes the final tie-in for the pistol and the leather. Your leather is outstanding, anyway, and the whole rig is totally balanced. Outstanding work, pard.
Thanks for all your great works, pards. I miss a day here and everyone goes wild. Outstanding. What's it going to be like after I return from Tombstone next week? I'll be drooling for a couple days going over the posts and pics. Adtually, I'll have my laptop along so I can look in as long as I have WIFI.
-
Howdy Pards, :)
I know you all are getting tired of me posting my carving peieces, but the only way i think that I am going to get better is to try and make stuff. I finished these the other day.
Thanks for looking!
ACE
-
Ace looking good. You are right. You are getting better and practice will do it . Keep them comming. KT
-
Very nice Ace, you're knocking them out like crazy now, keep it up, your cuffs look great and your carving is coming right along, I know you have to be enjoying that, you make WC and me proud.
tEN ;) :D ;D
-
Great carving Ace !
Eventually I'd like to try my hand at some Sheridan style sheath carvings. Thanks for the inspiration.
-Josh
-
Thanks everyone!! I love to carve, maybe it is because I am not very good!!! But I hope to get E for effort!! :) I have made up my mind to do a belt, and I know it will take me a long time to do, but I feel that it is time to make the effort. If I don't try I will never be able to carve, so I must make lots of mistakes before I will ever be half decent.
Josh,
I can tell you for a fact, that if I can carve, I know you can!!!!!! The only thing I have going for me is, it doesn't matter how crappy I carve, I will allways try to be better. I have had the best teachers a person can have, (my friends on this forum) and now it is up to me.
Later
ACE
-
Howdy Pards, :)
I know you all are getting tired of me posting my carving peieces, but the only way i think that I am going to get better is to try and make stuff. I finished these the other day.
Thanks for looking!
ACE
Howdy Pal
I never get tired of looking at leather work.
Those cuff have a great period look to them. Keep up the good work.
WC
-
Those cuffs look great Ace.Dave :)
-
Ace, ol buddy, you are really gettin the hang of things. I agree with WC those cuffs have a really great period look to them. Mostly, I am glad to see you are able to do a little bit everynow and then. Keep it up Pard.
Thanks to everyone for the comments on the knife and sheath. I only have one problem... I am fresh out of files so I guess I need to start haunting the yard sells again ;D
-
Howdy Ace,
Beautiful job on you Cuffs! You are getting pretty good at carving. These have a great look to them. Keep em' coming Pard.
-
Thanks Pards!!!!!
I have a new project in mind, and most likely will take a lot of time to finish! I enjoy seeing everyone's work, it seems to keep the fire burning in me!! It has got cold here so that will slow me down a lot!! But I hope to keep going!
Later
ACE
-
WOW Ace, those cuffs look GREAT!! You're getting there!! ;D
-
Nice work on the cuffs Ace! ;D I never tire of looking at everyone's stuff. That's where some of the best ideas are plagiarized. ;)
Safe trails,
CKid
-
Nice job, Ace. Those cuffs are cool. That tooling is good. You've really advanced your skills a lot in a short time. Keep 'em coming.
-
I just finished this one for Kid Terico. It's a fancy one ;D
(http://i243.photobucket.com/albums/ff240/johnmcohea/DSC03297.jpg)
(http://i243.photobucket.com/albums/ff240/johnmcohea/DSC03298.jpg)
-
Thanks for all the kind words on my cuffs. I know that they could of turned out better, but the only way I know to get better is by doing.
John,
AWESOME job!!! I only wish I had a little of your talnent!!!!!! I have sit and thought days apon days of making something that looks like that, but I never get started!! I guess I just don't have it in me to create leather goods that have that 1800's look!! You guys that make the early period leather goods have a insite that I just don't have????
John, Keep up the Awesome work, I enjoy looking at it so much!!!
Later
ACE
-
John, that is a great looking piece of work. I know the Kid will be proud of that one.
-
Howdy javascript:void(0); ;) :DJMC :D
Nice work John, like Ace said you pards really have talent, I know Kid Terico will be happy as all get out with this one too.
Thanks for the look see
Regards
tEN wOLVES ;) :D ;D
-
Howdy John,
Beautiful work! You have created a Museum piece and a true work of art. Many thanks for sharing your talents with us.
-
Beautiful work. Thanks for sharing this one.
-
That is a great piece of wrok Jon, I'm sure Terry will really appreciate it. Thanks for sharing pics of your work, JD
-
Hey John,
How about a pic of the knife beside the sheath. I would like to see the blade! Glad that I was sitting back from the keyboard and just drooled on my coat! :o ;D
-
John,
Durn it man ! Now KT is gonna know what there supposed to look like , LOL.
Kidding of course ! Your stuff is always fantastic and continues to inspire. Mrs. Shook aint got nothin on you Pard !
-Josh
-
John been gone all day and just got to see your post. It it absolutly FANTASTIC.. Great workmen ship. Cant wait to get it. Maybe now Josh will make something not so plain for me. OOO Hi Josh ;D Josh is in the process of making me a really different sheath right now and Dave and him are making a one of a kind knife also. A while ago GB had a knife showing that I had to have , so he was kind enough to sell it to me. Thats the knife in the sheath.I,m starting to get a nice collection thanks to all the pards on CAS. Thanks to all of you. Neds making me some nice pieces also. KT
-
I finally found the time to make a Sim Jim holster for my 1860 conversions. I made it to mate up with my knife scabbard....Now for a belt! ;)
(http://i98.photobucket.com/albums/l264/dasfritz/Thanksgiving2009006.jpg)
[Dead link removed by moderator]
-
Triple ,nice looking holster. Great match to the scabbart. when u get the belt done u will have one heck of a nice rig. Like the rich color. Waiting to see the whole rig. KT
-
Thanks fella's for the comments on Kid's sheath.Had to scratch my noggin and do some thinkin' on how to set this one apart from the rest, and i'm very pleased with the results!
-
Howdy TripleW :D
That's some good looking hardware there, and your leather work work well for both of them, nice looking all around, thanks for the look see. ::) :o 8) :D
Regards
tEN wOLVES ;) :D ;D
-
Triple W,
Great job!!!! Very clean lines, your design is great!! Thanks for sharing!
ACE
-
Triple W, that is a great looking set. I really like the simple but very classy lines on the holster and the sheath. First rate, Pard.
-
Triple W, +1 to what everyone else has said, and a double + for the color, I really like it. JD
-
I finally found the time to make a Sim Jim holster for my 1860 conversions. I made it to mate up with my knife scabbard....Now for a belt! ;)
(http://i98.photobucket.com/albums/l264/dasfritz/Thanksgiving2009006.jpg)
[Dead link removed by moderator]
Very nice work WWW.
Very much my style preference on both peices.
Tell me about your Bowie. I had an Edge Mark 8" blade that was a ringer for that one. I bought it at one of the last Great Western gun shows before they moved from Commerce to Pomona 'long about 1980.
I gave it to man who was going to fit some new scales and a better guard to it for me and haven't seen him (or the knife) since. That was about 1996.
Good all-around working knife for the $40.00 or so I paid for it.
BTW, I see you prefer the cutting edge to the rear on the left side (or forward on the right) , too. ;D
-
Howdy Triple W,
Great job! Clean and neat designs with very nice workmanship. Many thanks for sharing this with us
-
(http://) Got a new 2 part stamp in from Barry King this week and this is what I came up with. KT
-
Thanks everyone.
Forty Rod, you nailed it! It is a Edge Brand. I picked this one up in a trade back in 1981. I guess they were quite common in the 60's & 70's. Mine is 13 inches overall. Always was my favorite knife. I just wish they had made them without the "Original Bowie" marking, then they would be perfect in my eyes. :D
TW
[Dead links removed by moderator]
-
Howdy Terico Kid :D
This is one snazzy looking rig, the BK stamps are beautiful, but I also like you holster design, it's nice clean looking, and using a separate strip of leather for your bullet loops adds a nice touch, WELL DONE PARD :D ;D ::) :o 8)
tEN wOLVES ;) :D ;D
-
An awful lot of English Bowies in those days bore that or a similar marking. It's "period correct" if you're into that.
If you ever decide to sell it, let me know.
My 4 yer old Linder is almost identical, but has a much heavier guard of stainless steel (or heavy nickel or chrome plate). The blade is SS, too, and it drives me nuts that it looks so shiny and perfect all the time.
-
Aw Kid , you did it again. You've gone and knocked my socks off one more time, and its to durn cold to be doing that.
That is an absolutely geeorgous rig. You really have an eye for combining stamps and laying out a beautiful design.
-
That holster is a great match for your sheath, WWW. The rich color and simple lines really look good. Nice work. That knife is a very good design. It's really a fine companion to an 1860 conversion.
Very nice rig, Kid. That's a really nice effect you got on those holsters. The whole thing has a grace to it. Beautiful.
-
Howdy Kid,
Another outstanding rig from your workshop! First class in every way! Thanks for keeping em' coming.
-
Wow KT, you sure got the max out of the new stamps!!
Forty Rod,
How much gas do ya use to drive yerself some place you already are?? I don't use none, 'cause I live at nuts!! ??? :P ;D
-
Terry, you da Man! I agree with GB, you've got a good eye for combining stamps, along with a great flair for design.
-
Thanks to all of you for the compliments. Comming from fellow leather artists ,all of whom put out fantistic rigs themselfs makes it just that much more meaningful. Thanks again. KT
-
Outstanding KT! What a beautiful set, and I love that color. I can just imagine the time it took you to do these.....you are indeed a true artisan Sir.
TW
-
KT, TOTALY AWESOME! :o :o :o :o :o :o :o I have a Barry King wish book my self, and those stamp you used is one that I have been eyeing!!!! Those 2 stamps and the other Barry King stamp you have used are KILLER :o :o I just love the way there look, you done a SUPER job with them, I am afraid if I had those i coul;dn't do as good of job that you did!!! In my opion the stamping makes those rigs look old, maybe they are not a period stamping but I think they make the rigs look very period???
I guess that would be in the eye of the beholder?? ???
Great Job, anyone would be proud to wear those!!
Keep them coming.
ACE
-
Howdy Gents, some of your post have been getting way off topic, and I've had to delete these, please try to stay on topic.
Use the BUNKHOUSE RAMBLINGS for off topic material and things unrelated to leather.
Thanks
tEN wOLVES
-
Well Pards here's my latest in leather
Let me know what yall think. I gladly take both comments and critisism with pride so don't yall hold out on me now ;D
This here the Koyote Ken boot sheath is 8-9 oz veg tanned custom tooled and lined with black pigskin lining leather. I do appologize fer my picture takin abilities or lack there-of , LOL ;)
Here she is fellers
(http://i570.photobucket.com/albums/ss147/joshdabney/KoyoteKenDagger004.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/KoyoteKenDagger006.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/KoyoteKenDagger007.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/KoyoteKenDagger026.jpg)
Check fer more info and pics in the Cutting Edge- Thanks fer any input Pards, Josh
-
Howdy Josh, :)
Totaly Awesome!!!! :o :o That is a great combo!! The knife and the sheath just go together!! Great look spring system, is that something you make?? I might be a little parcel to the sheath, because of trhe card marking!!
Keep up the great work.
ACE
-
Josh thats what I call first class. Nice sheath design but what I really like is the knife. Great job. KT
-
Howdy Josh :D
I like it Josh, a gamblers dagger, very well done, and on the back side, the clip looks to be strong enough to last, is it spring steel? the size is perfect for a hide out knife or boot knife, your carving tells what type gent would wear your knife, and the color is rich and classy. The knife is killer, it really looks great, Keep them coming Josh, I always look forward to seeing your work.
Best Regards
tEN wOLVES ;) :D ;D
-
Josh, That is class right down to the last stitch. Great job on the sheath and the kinfe. Don't think I've ever seen better. I love the way you always finish the back to compliment the front.
-
Well Josh..You really did it!!!
I had a vague idea in my head but never expected to get everything in one package.
Seems like you hit on every point I made and the read between the lines and made it even better.
I am so glad we actually talked on the phone before proceeding!!!
By the way guys,.. that KK is from a sketch I made in about 1954. Josh was able to take it and do his magic
Thanks again;
KK~!~
-
Howdy Josh,
Beautiful job on the Sheath & Knife! It all goes together quite well. The workmanship is first class. Many thanks for sharing your work with us. As TW said please keep em' coming.
-
Here a are a couple of projects I just finished.
The Black Holsters are a matched set. They are fully lined and were dyed with Fiebing's Professional Black Oil Dye followed by three coats of Neets and one coat of Skidmores Leather Creme.
In regards to the Tan Rig, I've been shooting Duelist for the past three years and wearing a cross draw holster on my left side. For next season I want to try a right hand/left hand strong side rig so I made this one to practice with. It is a basic "Plain Jane" rig but I'm happy the way the color turned out. The rig was immersed in my latest batch of Walnut dye for approximately one half hour. After letting it dry thoroughly, I applied three coat of Neets Foot Oil followed by one coat of Skidmores. This is one of the looks that I try to get and I hit this one by chance.
I started taking Carving lessons at our local Tandy Store last week. I want to be able to add a little bit more to my work. It a;ways seem to look the same.
-
Plain, simple and looking good. The brown rig looks like could have just come off some cowboys hips after a trip to town. they look great, Johnny. I wish My local Tandy would have some classes but they don't seem interested. I am sure you will get alot out of it.
-
Johnny those are some nice looking holsters and rig.I really like the spotted one.I LIKE THE SHOWY ONES. KT
-
Howdy Johnny
Pretty fancy, love the spots, and your double rig looks like it will get you going in the strong side, nice work pard. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Josh & Johnny
Good Lookin work both of you.
WC
-
Very nice combo, Josh. The knife and sheath are really nice. Good work.
Good rigs, JM. I like the spots on black. That will go nicely with a black hat. The brown one is more conservative and traditional cowboy. Both are good work. I agree on the double strong side for duelist. Was that crossdraw you've been using a leftie or did you do the triple-jointed-backward-spaz-grab to pull your pistol with your left hand?
-
Many thanks for all of the kind words Pards.
Marshall,
I wore the crossdraw holster on my left side, did the crossdraw dance and drew the pistol with my right hand.
-
(http://) Heres one I made off of page 50 in Packing Iron. Just finished it to go with the knife sheath John made for me. Dont know what I,ll do on the belt yet. The second one is for a rig for the knife and sheath Dave and Josh made for me. Belt is in the works now.KT
-
Howdy Johnny and KT, :)
Johnny AWESOME job, great looking rigs. Very nice looking period rigs!!Your lines and design are perfect, and great detail on the spots!!!
KT, Another pair of super sharp holsters.Great detail and design, you did a great job on the spots looking just like the one in Packing Iron, and also a super job on the fringe rig!
thanks to both of you guys for sharing those with us.
Keep it up!
ACE
-
Howdy KT,
You have outdone yourself and created true works of art that could be museum pieces. Thank you for sharing your work with us.
-
Thanks for all the positive re-enforcment Pards.
Boot Clip. I did not make the boot clip it is a manufactured item. Unfortunatly these are no longer in production but I was lucky enough to get to use a couple of them. They are a little stouter than your typical stamped clip available from Tandy's and the like and yes they are spring steel.
Gun Butcher- I do try to always do something on the back side of the sheath. I just feel it shows attension to detail and care fer the product yer makin and the materials yer usin. The Devil's in the details ya know and stuff like that helps to set handmade items apart from mass produced items.
It sure is a pleasure gettin to view everyone wares here in the show yer stuff forum. thanks fer the inspiration and feedback Pards !
-Josh
-
Well done KT, the top one does look a lot like the one in Packing Iron, and the other one is way out, and has that Terico Kid touch to it, they should all make good mates to the knives and sheaths you just got,
Regards
tEN wOLVES ;) :D ;D
-
Hey Josh,
Do you have one of the clips that you could take a pic of and post it here???????
Later
ACE
-
Ace,
I dont have any others :( Perhaps Dave will chime in. Really though a pic isn't needed.
There is the part that you see on the sheath and the side that goes between the body and lining. That side is just straight and flat and goes just past the rivet hole.
-Josh
-
Howdy
You guys are puttin out some really great work.
WC
-
Josh you are right about the details. I always loved looking at the better kentucky rifles and finding all of the little things that you don't see unless you look real close.
KT, that rig ought to fit perfect with your knife sheath, I'm really starting to like spots. The second one is great also very good job on the decorating. But, what really caught my eye is the grips on that there pistola.... Very nice.
-
Kid, it's good to see you doing some old-time stuff as well as the movie rigs. The one from page 50 of Packing Iron is terrific. Skeet
-
(http://) Pict. of my snake rig. KT
-
Great looking rig KT.You must own stock in the spot company lol.Dave
-
Howdy KT,
Another beautiful Rig from your Leather Shop that is a genuine pleasure to look at! Thanks for sharing and keep em' coming
-
Again great work Kid, nice placement of your spots and and your tooling came out really sharp, WELL DONE, Pard ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
KT, your definitely the King of Bling!! ;D ;) ;D
-
As Dave said they should give me the spots just for advertising. ;D KT
-
Thats very Cool KT!! :) :) I realy enjoy looking at your rigs. I think it is great, you have to think outside the box to ever get in the box!
Keep it up!!
ACE
-
KT, that's another excellent rig you've cranked out in a hurry. Are you possibly related to this guy?
(http://i165.photobucket.com/albums/u51/HarleyPastor/speedyG.jpg)
-
JD now thats FUNNY. You should know hes so slow I have to kick him out of the to let me by. :) :D ;DKT
-
Kid, that looks like it was fun to make. Great looking rig as always.
-
Thanks to everyone for all the comments. :) KT
-
After getting frustrated with standard cigar cases not fitting into my vest pockets at events, I decided to try my hand at making one. Not hard to do. Kind of shocked that it came out to a tight fit since I was sorta guestimating. It is designed for the smaller cigars, but expands to accommodate larger ones as well.
-
Now thats a neat little accoutrement, Santee. Very nicely done and very useful.
-
Santee nice job and great fit..Good idea. KT
-
Howdy Santee, :)
Great job there pard! I call that thinking outside the box!! That is were I have had a mental block here lately?? I wnt to make something different put my mind goes black when I get to thinking about what I want to make!!
Keep making those cool things.
ACE
-
Good idea Santee, and you did a nice job making them, thanks for the look see ::) :o 8)
tEN wOLVES ;) :D ;D
-
Santee...very nice job on that cigar case...well done.
JD, you better be careful...some goofball will say that mouse is not politically correct 8) ;D but it's funny for sure...and I for one like it
-
Many of those old cartoons were Majorly NOT PC :-X I'm just amazed at KT's work; he does excellent work, very much the style I like. And the fact that he pumps them out so quickly is also amazing. It's not like he sits around with nothing else to do; he has a lot of knives in the fire. He's a very interesting guy to talk to. If he lived closer, we'd spend some time together.
-
Howdy Santee,
Very nice! A nifty design for a useful item. Thanks for sharing this with us.
-
Thanks guys!
-
JD I wish a lot of us lived closer together, and dont put Speedy down. Hes about my size. ;) ;D KT
-
Just NOT as fast as you are! ??? Right?? ;D ;) :D
-
OK here is my first attempt at making a gunbelt, knife sheath and holsters. I recently got married so I left lots of room for growth on the belt for that gooood "Southern Cookin"!!! Need was the reason I attempted it. I started shooting NCOWS and couldn't use my dropped holster belt and open trigger guard holsters. 8)
-
Johnny Thundergun,
Seems a durn fine rig to me pard, great work !
I would like to question the high ridin sheath though. Is that just a personal preference ? I don't reckon I've ever seen on quite like that before.
Nice rig Pard, Josh
-
Thank you Josh! The reasoning behind the sheath is in the behind... It is in the middle of my back and when I sat down I would sit on the knife. The belt loop has enough slack to swivel to either side slightly, in order to use right handed or left handed. HAHA and I don't have to think before I sit!!!
-
Johnny,
I did kinda figure that was it but sometime my thinker ain't always spot on so I though I'd ask the feller that knew the answer.
I do a'preciate the reply pard.
-Josh
-
Howdy Johnny Thundergun :D
Welcome to the Leather Shop, I think you did very well for a first attempt at making gun leather, this stuff is addicting, the more you do , the you want to do, is your knife sheath attached or do you wear it that high, Johnny you did good pard, and we'll be looking forward to seeing more from you. We have a great bunch of pards hear that go out of there way to help and answer question, so don't be a stranger. Thanks for the look see. ::) :o 8) I just caught your last post before I posted, LOL, I guess I was wondering as was Josh, that's a good answer. ;D
Regards
tEN wOLVES :D ;D
-
JT nice to see another pard doing leather . It is as TW said, very addicting but fun Great job for just starting. You can learn a lot by asking ?s. There are a lot of good leather makers on this site. Luck and keep posting. KT
-
Well, while I've been out of circulation a bit, I see there have been many cows dying a glorious death and going on to be immortalized with some of the more amazing pieces of gunleather I have seen in some time.
Hope to have a piece or two to add up here in the near future. Been busy with paintings, work and what not. We had an art director quit for Petersen's Hunting, and I stepped in for an issue, and now we're finishing up a Gun & Ammo that's hanging out while the AD takes some personal time.
He and his family could use your prayers, pards. More on that over on the Bunkhouse.
-
Howdy JT
Nice lookin rig for your first one.
WC
-
Howdy JT,
That's quite a nice looking Rig especially for your first one! It looks like you have put a lot thought into the design. That one of the great things about making one's own gear... you can incorporate your own idea's and get exactly what you want. Welcome to the Forum and we look forward to seeing your future projects.
-
Howdy JT, welcome to the Forum and congrats on the recent wedding. I do hope it works out well. I'm still tryin to get the hang of this married thing. It's only been 33 years, & I don't have it figured out yet!
That's a great job for your first rig, just jumpin in with both feet! Doing the belt, holsters, sheath & shell loops right off the bat. I'm more convinced than ever that everyone has more natural talent than I EVER hope to have.
Thanks for sharing your work. JD
-
Johnny T, great looking first rig man. That ought to work well for you.
JD, if you're smart enough to know that you ain't smart enough to know them you gotter figgered out Pard. ;) ;D
-
WOW!! Thank y'all for the compliments. I am a transplanted Northerner so I hope y'all came out right! The part about getting the hang of this marriage bit... HAHA I am blessed with a sweet Texas Belle. She is the one with the work cut out for her!
I learned following my first NCOWS match using it, that dual shotgun shell loops were a no-no and changed that to single loops and made some minor changes to the buckel system. It is a fun learning process. I also have several projects going in different dirrections. Lets see.. Building a computer for the wife for Christmas, makeing a model railroad for the Grandson, set up a reloading system for my blackpowder shotgun shells and somewhere in there fix my Jeep to get to the next shoot. HMMM prioritiies.. I thought I was retired!!!! 8)
-
"I thought I was retired!!!!"
Don't you know that " Retiired" means you are Tired twice as much. :)
WC
-
G'Day All,I just got an email from Tandy Leather that may help anyone new to carving.The email is a catalog of specials & you can download free videos by George Hurst.Not sure of the link but someone here will be able to help with that.Feathers
-
Howdy folks
That G.Hurst link is
http://www.tandyleatherfactory.com/Leathercraft-Videos.aspx?tcd=9M11TEM-H-TC
WBC
-
Thanks White Buffalo,I'm not too computer savvy.Feathers
-
Thanks Feathers and WBC for bringing this to our attention and suppling the link. I haven't watched all of them yet but they seem to be very good and very helpful.
-
Cowboy I seem to remember hearing that.. Dang must be the "Oldtimers Disease" I forgot.. Thank you for the info on tooling. 8)
-
Howdy all,
This is my first post and pictures of my first tooling attempt.. Hope you find it pleasing?? Any comments would be appreciated.. Thanks
I hope the picture attached??
-
Howdy Kretzer,
Welcome to the CAS City and the Leather Forum. You will meet a lot of good Pards here who are more than willing to help and answer your questions.
That's very neat and precise work especially for a first attempt.
-
That's some nice clean stamping there Kretzer, and welcome to the forum. You'll find this is a great group of helpful guys. JD
-
Hey Kretzer, great first attempt. Welcome to the fire. We are always glad to see new people.
-
Howdy Kretzer! ;D
You did an awsome job for a first attempt, much better than mine I think if I can remember that far back. :o
There is a wealth of knowledge in this forum so ask away when you have questions, sometimes you might even get the same answer twice!!!! :P :P
Ned
-
Howdy K,
I wish i could stamp that evenly, but i keep getting
in a hurry and flummox it somewhere along the line.
Nice work. :)
WBC
-
Howdy Kretzer :D
Welcome to the Leather Shop Forum, we're happy to have you join us, like others have said, we're a sharing bunch of pards here, I think you did a dandy job on your first attempts at stamping borders on these belts, much better than I did when first starting out, which means you are probably a natural at this craft, keep up the nice work, and we'll be looking forward to seeing more of your work in the future, thanks for the look see Pard.
Regards
tEN wOLVES ;) :D ;D
-
Kretzer welcome aboard. Nice job. Keep it up and keep posting. KT
-
Great job Kretzer! Hay guys I have a question... When I made my holsters shown previously; I soaked the holster, put the pistol in it and laid it on the wifes dashboard sitting outside on a 100+ degree day. Now winters in Texas are warm but 50 and 60 degree days just don't bake and tighten the leather as well to form to the pistol. What do y'all do to form fit holsters? :-\
-
Great job Kretzer! Hay guys I have a question... When I made my holsters shown previously; I soaked the holster, put the pistol in it and laid it on the wifes dashboard sitting outside on a 100+ degree day. Now winters in Texas are warm but 50 and 60 degree days just don't bake and tighten the leather as well to form to the pistol. What do y'all do to form fit holsters? :-\
Johnny we have a Fac/How Too's that you can go to anytime to look up answers to you question, but if you don't find what you're looking for then go ahead and post your question. here's the link http://www.cascity.com/forumhall/index.php/topic,5106.0.html
tEN wOLVES ;) :D ;D
-
Howdy
Very nice clean stamp work.
WC
-
G'Day All,Just finished this wall plaque for my brother (he studies British Royalty).Like I said to Ace it's a good way to use up scrap leather.I am going to do one for myself with all the old western stars,hope you like it & thanks to WC for his input on the timber grain.Feathers 8)
-
Feathers, that is very cool and very nicely done. You are going to be his favorite brother.
-
Feathers,
Way COOL!! He'll drool every time he walks past it! ;D
-
Dang Feathers , that's Beautiful, your Brother is going to flip, your wood planks came out great, that WC, really knows how to do it, what blows me away is your art work, it takes a pretty steady hand to do what you've done, Feathers, My Hats Off to Ya Pard. ::) :o 8) :D ;D
Regards
tEN wOLVES ;) :D ;D
-
Feathers thats a fine piece of art. You should be proud of your work. KT
-
Thanks for the comments guys,had a lot of fun doing this project,TW I like to do the fine work & I bought a 1/4 in ceramic blade($60 thank you very much) that just seems to flow around those tight curves.Feathers
-
Holy cow, pards. I disappear for a couple days and all this great work shows up. It's all great stuff.
Kid, that Heiser holster with the spots is outstanding. It carries the look of the original very well. I've eyed that holster several times thinking "someday.....". You definitely did it right. Good work. Fine looking snake rig, too. Very nice.
Cool cigar case, Santee. It looks like a good solution to the need. Very well done. ;)
OK here is my first attempt at making a gunbelt, knife sheath and holsters.
Very nice. First rig, eh? That's a very well made set. Thanks for sharing. Welcome to the forum. Looking forward to more of your work.
Kretzer, that border work is just right. The spacing and alinement is perfect. If that's your first, I want to see more. Welcome to the forum.
Beautiful work, Feathers. You did a bang-up job on that plank background. The piece is really interesting. It keeps your eye moving. Your brother will be very pleased with that.
-
Howdy Feathers,
Beautiful job! You have created a true work of art for your brother. Many thanks for sharing this with us.
-
Thanks Marshall & Johnny,I've come up with an idea for the one I'm doing for myself,I was thinking of doing an old western town street scene & insert some old black & white pics of say the Duke,Gary Cooper,Jimmy Stewart & the like.Feathers
-
Be sure to post pics when you get it done!! Can hardly wait!! ;D
-
Thanks Marshal, its sure different trying to make the old look. KT
-
Howdy Feathers
Very cool. Great job.
WC
-
Thanks WC,It means alot coming from you,your input & help with the timber grain got this plaque to the finish I wanted.Feathers
-
Great work Feathers! Ten Wolves thank you for directing me to the FAQ's and sorry for the misspost..
-
Great work Feathers! Ten Wolves thank you for directing me to the FAQ's and sorry for the misspost..
Howdy Johnny, you didn't miss post pard, I just wanted you to know how to find a lot of information that we have available in the
FAC/HOW TOO's, being new to the forum, we like to point this out, we look forward to seeing more nice pieces from you in the furure.
Regards
tEN wOLVES ;) :D ;D
-
(http://) Finally got the belt done to go with the holster. The knife and sheath came 5 minutes ago from Chuck B so now I can post pictures. Hope u like it. KT
-
Well, my pard Josh and I got finished with the Arkansas Toothpick project for our other pard Kid Terrico.It's a big'un with a 12" blade.Dave ;D
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/toothpick3.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/toothpick4.jpg)
-
Dave and Josh. Thank you for a outstanding knife and sheath .I just might keep this one. The only way it could be better is if it was FREE. :D ;D ;) KT
-
If anyone's interested
134 strands of fringe
66 sinew wraps
22 red thread wraps
19 antiqued brass tacks
14 beads
3 brass cones with horshair tassels
And yes.... It took quite awhile to complete, LOL ;D Glad you like it Kid, Josh
-
(http://) Back of sheath. Of all of 8 of Chucks knifes and sheaths I have I think I like this one best . Of course I paid the most for this one. He charged me by the bead I think. :) :D ;D
-
Thanks Josh, my feeble old mind couldn't remember all that,I just knew it was alot.You'll have to give me a list next time,lol.Dave ;D
Glad you like it KT
-
Dave , Josh, and Chuck, beautiful work. Those knives an sheaths are the epitome of leatherwork.
Kid , I will say it again, You are one lucky man
-
GB its your lucky day. To day only if you send them lots of money they will make u one. :D ;D KT
-
Howdy Josh, Dave & Chuck,
GB echo's my sentiments exactly. Many thanks for sharing this fine work with us.
-
Kid, if I had lots of money I would do the same thing you are doing. If more people supported craftsmen we wouldn't have so much throwaway junk in the world.
My idea for going green ;D
-
Well Kid, this is a nice way to round out the year, your holster and belt look fantastic, and CB's knife and sheath compliment your rig very well, Dave and Josh are over the top with this new knife and sheath, and thanks Josh for breaking it down for us, both you and Dave are masters when it comes to design and execution, WELL DONE TO ALL YOU Pards, and thanks for the look see. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
KT's coyote knife with clothes - I promised to have this for him for today so after a mess up on the sheath I re-started it last Thursday at 10:30 AM and 25 hours later et voila....
(http://www.wrtcleather.com/1-ckd/1-2009/knife-morin-coyote2-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/knife-morin-coyote2-2.jpg)
The Texarkana Toothpick all dressed up - I hand forged the cross out of 99% pure silver ingot - used an old beat up hammer to get the texture.........
(http://www.wrtcleather.com/1-ckd/1-2009/cactusrose-34-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/cactusrose-34-2.jpg)
Last but not least - some VERY nice work from others here.........and Josh word of advice - quit counting! ;) it'll will just drive you KNUTZ! ;D ;) ;D
Now back at it - got four more things to get done by Friday........anybody know how to clone oneself!!!!
-
Chuck,
Great stuff as always ! I believe I'd lose count on all those beads, LOL. Looks fantastic fer sure though and well worth the 25 hrs. invested.
The end product seems to keep me going through the tedious times. Good luck with the Fri. deadline fer the other projects. I got a knife to get done by then but should pull through ok, LOL
I'd clone myself if'n I wasn't so skeered a what he may do ;)
-Josh
-
Thanks for the kind words pards.My pard Josh outdid himself again.Great work as always Chuck.Dave ;D
-
Holy COW!!
You all have been mighty busy!! :) Sure are some purdy stuff you all have been making! I think everyone has stated all that could be said!
Thanks for sharing.
ACE
-
(http://) Knife sheath I just finished making. KT
-
WOW Kid, :D
This sheath is Fantastic, again great design and execution, your spot work is top notch, as is the antiquing, and adding the beads and horse hair really puts the finishing touch to this great looking sheath. kid as fast as you do your work, you'd think you had a crew of Elves working for you. :D ;D :D
Thanks for the look see Pard ::)
Regards
tEN wOLVES ;) :D ;D
-
Terry, before I expanded the picture to take a good look I thought "Wow he's a brave man to show a knife sheath right after Chuck displays one of his creations", then I took a look. Great job my friend, great job!
Chuck, I am speechless when it comes to your work, it is always beyond incredible.
-
TW and JD Thanks to u both. Terry
-
Kid, that one is right up my alley. That would look great next to my powderhorn and possibles bag. Very nice work. Ron
-
KT,
That is simply AWSOME, to steal Ace's thunder. :o :D You are definitely the King of Spots!! ;D
-
Howdy KT.
Awesome Sheath! Your design talent and workmanship are incredible! When you start a project, do you make a drawing or sketch first?
Many thanks for sharing this with us.
-
Howdy All
Started this one yesterday.
WC
-
Here is a little closer shot of the stamping.
WC
-
Beautiful, WC. What is that stamp?
-
Wow, I love that one WC. Very ,very nice work
-
KT- Beautiful sheath Pard !
I'm not at all suprized given your obvious and unbelievable talent with pistola rigs and such.
Cowbywc- Where did ya git the machine that did that stampin fer ya ? LOL. I strained my eyebulbs lookin fer a flaw on the sheath but there just ain't one there to find ! That, IMHO, is truly amazing work so I had to give ya a jab about usin a machine, LOL.
In all seriousness though that is truly fine craftmanship and an ispiration, thanks fer postin it !
-Josh
-
WC, I have to agree with the others on this one, that stamping is perfect, nice choice of stamp too, and the two tone looks good also.
You make me Proud Pal
tEN ;) :D ;D
-
Johnny M, No I just start and let it all come together. WC nice sheath and great stamping.Great worhmen ship. KT
-
WC, that’s a very impressive sheath. I don’t recognize that stamp, but it’s a good looking one
Josh, looking for flaws in WC's work is a lost cause. When I was in his shop earlier this year I had an opportunity to handle a lot of the leather goods he has made. I'll tell you what, there was not a single flaw on anything I looked at. I wish he would post some of his stuff, like his luggage, complete with a space on the outside for cowboy boots, way cool. He made a pair of saddle bags that are mind blowing.
10 Wolves, being a friend of WC's and frequent visitor to the shop-retail leather store can back up what I'm saying; I met him while at the shop too. Visiting WC’s shop and meeting WC, 10 Wolves, and Sandi was the highlight of my trip to LA this summer.
-
Howdy All
Thank you for the kind words.
JD
I think it's time to have those glasses rechecked. :) My work has lots of flaws but that is what handmade is all about. I am not perfect. That stamp is hard to run and it did start out running off to he right but I managed to pull it back half way up.
I am looking at getting the new version of the stamp, the inside curves are scalloped to match the top so you don't cut off the top scallops.
The stamp is a shell stamp from Hackbarth.
WC
-
Another one bites the dust.......
(http://www.wrtcleather.com/1-ckd/1-2009/gunrig-jajo-0912.jpg)
-
Simply gorgeous!! Boy howdy would I like to have that one!! ;D
-
G'Day Chuck,I really like your holster,what jumps out for me,I have a book on the story of leather carving,the book states that carving is a version of the engraving that was done on the Spanish Conquistidores armour,& in the examples in the book you can see how they relate to the carvings on holsters & saddles & such.Feathers
-
I stand by my assessment of your work WC, although I'm sure that you, being the maker, know where the "flaws" are, and I respect that. The stamp is very cool. Is it kosher on the forum to ask what, if any stamps you might carry in your shop, Standing Bear's Trading Post besides the current crop of Craftools?
-
Chuck my friend you have outdone yourself again!!! Fellas I am the lucky owner of that rig. I asked Chuck to make a close copy of one that was featured in Dennis Adlers book Metallic Cartridge Conversions. Chuck got VERY close to the original. We had a few changes in mind before he started. He incorporated those into the design beautifully. Thank you again Chuck I can't wait for it to get here. ;D ;D ;D ;D ;D
Shotgun Steve
-
Kid, love the sheath and the Spots ;D, WC nice bit of stamping there. Chuck beautiful as always, Steve you should be happy with that one.Dave :)
-
A lot of the old west ideas I have seen on this site and a few others, I have seen on Chuck Burrows website years ago.
I know Chucks website has been an inspiration for many of us and I appreciate him sharing his ideas and techniques.
Thanks again Chuck.
Shotgun Steve
-
Looks like CB made you a nice rig Steve, it's a dandy for sure.
Regards
tEN wOLVES ;) :D ;D
-
Steve you were on the right track when you picked that rig to be made. You should really like it. KT
-
Chuck, that is a beautiful rig. I don't know how else to describe it. You have finally drawn me over to the aged look with that one. That is definitely museum quality.
Steve, I don't know Pard I might be afraid to use that one ;)
-
Kid, WC, and Chuck, absolutely stunning work on all yer parts!!!
-
Howdy WC,
Great job of stamping on your sheath! I'd sure call that perfect in my book. Thank you for sharing your talents and expertise with us
-
I'm taking classes in Carving. Our first class was how to use a Swivel Knife. Here is a practice Holster I just finished. It was immersed in my latest batch of Walnut dye for approx. seven hours. It has two coats of Neet's and one coat of Skidmore's.
-
I stand by my assessment of your work WC, although I'm sure that you, being the maker, know where the "flaws" are, and I respect that. The stamp is very cool. Is it kosher on the forum to ask what, if any stamps you might carry in your shop, Standing Bear's Trading Post besides the current crop of Craftools?
Howdy JD
Thank you very much.
As Standing Bear taught when beading there was only one perfect person, doesn't matter if you call him "The Great Spirit" or whatever.
I only stock Craftool and a small amount of Barry King's tools.
WC
-
Johnny M Thats pretty durn nice for a practice piece. I sure do like the color. Keep it up/ :)KT
-
Howdy Johnny :D
Your first carving looks great, much better than my first try, the holster looks great and that natural walnut dye came out real sharp, it's a nice shade, keep up the great work Pard, and thanks for the look see. ::) :o 8)
tEN wOLVES ;) :D ;D
-
Johnny M.,
That is a great first carved holster!! I'd be proud to wear it. :o ;) ;D
-
Nice rig, Kid. I like that belt. It looks like it would be very comfortable. That sheath with all the spots is a classy one. It's really one to be proud of.
Dave, that knive and sheath are really something. Very good work, there. Thanks for sharing.
More beautiful work, Chuck. I really like the first sheath. The beadwork on that one is spectacular.
That sheath is beautiful, WC. I really love that stamp. That makes a very pleasant pattern.
Another one bites the dust.......
Outstanding Dust, pard. One of your finest.
Very nice carving, Johnny. I like that style of carving. It has a real clean look to it. Very well done.
-
Hey Johnny, great carving. It looks like something from Packing Iron, Will Ghormley or Chuck Burrow's Holster DVD (and I mean that as the highest of compliments)
WC, thanks for the info on your shop. I remember something I heard in Bible school years ago: There are only two truths; #1, there is a God, #2, you’re not Him!” I try to keep that in mind. I don’t mean to overdo it with my comments on your carving and leatherwork, but Dude! You are an inspiration to lots of people, and it’s great that you pass on your skills by teaching. I only wish I was close enough to take advantage of your classes.
-
Johnny, that is a great looking rig, but, it doesn't look like practice to me. It looks more like you nailed it. ;) :D
-
Howdy Pards,
I greatly appreciate the kind words. I gotta say that without the encouragement and help from everyone on this forum, I doubt if I would be doing any Leather Working at all. Many thanks Pards.
-
Howdy John, :)
I don't know what I could ad that JD hasn't allready said!! Yes there is: AWESOME :o :o :o :o
You are cooking now Bud!!!!!
Howdt WC, :)
Hey Bud, Love the sheath :o :o You my friend are the KING of Stamping, if I ever just once stamp something half as perfect as you do, I think I will quit!!! I keep that scrap piece of leather and the spur stramp right by my stamping area, just to remind me that it can be done perfect if a person works hard at it like you do!!!!!! Love that Stamp!!!!!!!!
Thanks for sharing!
ACE
-
You all are producing some great looking stuff. After looking at all the
nice work posted lately, you all have inspired me to give leather working another try!!
Hopefully I will at least be able to turn out something usefull!! ;D
Shotgun Steve
-
You all are producing some great looking stuff. After looking at all the
nice work posted lately, you all have inspired me to give leather working another try!!
Hopefully I will at least be able to turn out something usefull!! ;D
Shotgun Steve
Steve go ahead and jump in, you won't be sorry, I have to say working with leather has been one of the most rewarding things I have done in my life, and I'll always be grateful to CowboyWC for pushing me to give it a try, so come on in Steve and join us, I know you won't have any regrets, and you'll be making you own gun leather in no time. By the way, just want to say I enjoy your web site/ forum. :D
Regards
tEN wOLVES ;) :D ;D
-
Well, Steve. I'm glad you're jumping in. That's what we all did at one time. I'm really looking forward to seeing what you come up with. This is a wonderful
addiction thing to do.
-
(http://) Heres a pict. of a knife sheath I put up a couple days ago. I put a small knife in it . Now it has the right knife in it. It was made by Ned and sheath was made to fit his knife. I also have the belt and holster for it. He has posted a pict. on cutting edge of it but the pict. does not do it justice. I tried to show the brass engraved medallion inlaid in the rosette on the handle but cant get a good pict. I can say beyond any doubt that NED is a OUTSTANDING ARTIST. KT
-
(http://) I just got the knife and sheath of Dave and Joshs, another true work of art. These items are looking so good I might buy more. ;D Heres the rig I made for this sheath. Hope u all like. Also Dave made the concho on the holster to match the sheath.KT
-
Great looking rig Kid. What I want to know is are you going to need suspenders to haul all that iron around ;) ;D
-
GB if u look closely u can see a small wheel on the bottom of the knife sheaths. :) :D ;D KT
-
KT,
Great to see it all come together ! You did a fantastic job of making a rig complimentary to the sheath !
Durn hard to stump yer creative abilities ! Guess I'll have to try a bit harder next time, LOL ;) :D
Sure hope the Boss approves :)
-Josh
-
Josh the wife couldnt be happier with it. You pards are just GREAT and dont try harder your giving me a headache. ;) ;D KT
-
Great look Terry, it's nice to see it all together, they all compliment each other, Dave Josh and Terry you Pards all did a fantastic job here, and my Hats off to all you guys. ::) :D ;D
Regards
tEN wOLVES ;) :D ;D
-
;D ;D Durn Kid, I had to get out my spyglass but yer right Their is a wheel ;)
-
JM, I think your carving is coming along great, nice looking holster.Ned pard you did a great job on that knife,looks good with KT's sheath.
Kid ,that rig you built is fantastic,,love it.Dave ;D
-
Man, that's some mighty fine riggin' ya got goin' on there KT!!!!!
-
Thanks to everyone. KT
-
Great looking stuff fellas. There sure is a lot of talent on this board. ;D
Shotgun Steve
-
Shotgun, remember your part of it. KT
-
I just happen to have a knife that needs a sheath like that and i do like that use of copper :) :)
-
My sentiments exactly!
Great looking stuff fellas. There sure is a lot of talent on this board. ;D
-
(http://) Heres a rig I made special to go with the sheath John Cohea made for me. I,m having a hard time keeping up with these pards. Got one more to make for my other Dave and Josh rig and dont know what to do.KT
-
Another beautiful piece of work Kid, I like the looks of this one, everything goes well together, thanks for the look see
tEN wOLVES ;) ;D
-
Howdy KT,
Outstanding! Looks like its right out of the pages of "Packing Iron". As I've said, your range and diversity of designs are incredible. It's always a genuine pleasure to view your work.
-
Howdy KT
Very nice rig. I like your work a lot.
WC
-
Here is another sheath I did today.
-
That's a nice pattern too WC, the sheath looks great, interesting stamp,looks good, as I look closer, I have that stamp, but have never used it this way, that's pretty cool.
tEN ;) :D ;D
-
WC I like that very much. If u dont mind my asking what is that design? Never mind , I enlarged it and figured it out. Is different. Nice job.KT
-
Those are some mighty nice works, Kid. That knife really goes in that sheath nicely. The rig is a great match for the knife. The second rig is just as good. Nice work. Thanks for the pics.
WC, I like that sheath. The stamping on it is very good. It has a nice texture to it. Good job.
-
Kid, that is another nice rig you have put together. That brass buckle really goes well with the rawhide in the sheath and handle.
-
Here are a couple of Christmas gifts I have been working on...
AZ Cattleman
-
One more....
AZ Cattleman
-
Very nice AC, the belt is beautiful, nice carving too, and that leash is probably the only one around with a meander stamp on it, which by the way looks great, you did a great job of centering it. thanks for the look see Pard.
Regards
tEN wOLVES ;) :D ;D
-
Howdy AC
Great work.
I hate to correct TW but I've been makin leashes with meanders for years. :)
WC
-
AC you have been busy. Very nice work. KT
-
Nice work AC, especially that meander stamp, which I've found to be a tedious bugger to use!
-
Howdy WC,
Another beautiful piece of Leather from your workshop. Thank you for sharing your talents and expertise with us.
Howdy AC,
Great work on those Christmas gifts! Someone will be very happy to find those under the tree.
-
AC, those gifts are really cool. I like the meander on the leash. Nice and even. Good work.
-
AC, very nice work on the belt and leash. I would never have thought of decorating a dog leash but you did a really good job with that stamp.
-
Thanks a heap pards, everything I make has a lesson in it, also mistakes,but that give them the hand made look.
Happy Hollidays
AZ Cattleman
-
Howdy Pards :)
WC, as allways I love your stamping!!!!!
AC, Great job on the carving and the use of the meander stamp!!
Keep up the good work!!
ACE
-
That meander can be a little tough..looks like you have it figured out. ;) Is that a comercial stamp or one you made??
-
It is a Tandy D447S stamp.
AC
-
Always nice to get back to this forum. I have been doing a little leather work. I made this pistol pouch and it has turned out to be very handy. Hope you like it.
Wiley
-
I have been playing around with Tandy's new Eco Flo dyes trying to get a little more of an older look to my gun leather. I would be interested in your comments about the coloring of this holster. Of course you recognize this as a Cheyenne holster from one of Will's patterns. This pattern is one of my all time favorites.
Wiley
-
Wiley,its good to have you back with us. That holster looks great .I really like the color,it gives it an old but really well cared for look.
The pouch looks real good also. you did a fine job on that basketweave. But i can't figure out what that shape is in the middle.
Is that New Jersey ;) ;D 8)
-
I really like that dye job pard,very nice lookin age to it.Now that other holster is a dandy,but why you would stamp the state of Texas on it is beyond me :(.Of course i'm a little ticked off at Texas right now fer stealin my duaghter ;) ;) She is in the Paerland area,works in Houston.
I call her a CaliTexafornian :P
-
Nice job on the pouch and the holster Wiley.I haven't heard many good things about the Eco-flow dyes with most saying they will never use them again, but yours looks good.Did you have any trouble applying it?Dave :)
-
Howdy Willy :D
Your gun pouch's look good, and your Cheyenne came out nice also, let us know how the dye holds up, and if any peels off, I'd like to try it, just not sold on it yet, but yours looks good Pard.
Regards
tEN wOLVES ;) :D ;D
-
GunClick Rick, Well pard I understand how you feel I have a daughter in California. Look at it this way it gives you a place to go visit. Thanks for the compliments on the leatherwork I'm real pleased you like it.
Gun Butcher, Thanks for your comments on the pouch and holster. The old but cared for look is just what I was hoping to achieve. NEW JERSEY!! Get a rope boys.
Dave and TW, Thanks for your compliments pards. No, I didn't have any problems applying the Eco Flo dye. This is only the second time I have tried the stuff. They sure have a lot of colors to choose from. We'll see how it holds up I'll let you know if there is a problem.
wiley
-
;D :D :) Last Christmas Gift to my Grandaughter.....
AZ Cattleman
-
Wiley. great job on that holster. One to be PROUD of. KT
-
AC, thats just pretty. She's gonna love it.
-
Another nice belt, AC you're on a roll, keep it up, beautiful pard
tEN ;) :D ;D
-
Howdy Wiley,
Good to see you! That's some beautiful work you have posted. Thank you for sharing it with us.
Howdy AC,
Great gift! It sure is fun to make things for Grandkid's. She will love it.
-
Hey Wiley, it's good to see you back on the Forum. Both the gun pouch and your holster look great. I like the color of the holster very much. I guess I'm going to have to give that Eco Flo a try one of these days. Thanks for sharing your work, JD
-
:) Thanks Pards, She is a cutie, and she requested a pink belt. She will love it.
AC
-
Way ta go Santa AC :)Gotta love stuff that grandpa makes :)
-
Beautiful work, Wiley. The pistol pouch is really nice with the basket weave. You ndid a bang up job on getting that right. The Cheyenne holster has a nicely used look to it. Very efffective.
Cool belt, Ac. The dolor is really rich. Nice job.
-
AC I forgot to mention the nice belt you made your grandaughter. You've really stepped into this game with a bang. Nice work; I'm sure she will love it, JD
-
KT, Johnny, JD and Marshall, thanks for the kind remarks on the leatherwork, I'll post the rig when it is finished. Always nice to get back to this group of cowboys and sit by the fire and chat about leather. I was scaning through the posts sure has been some mighty fine leatherwork displayed.
AC sure is some good lookin belts you have posted they're going to be some happy campers when they open those gifts and they will treasure them forever. I really like that leash very custom well done.
Wiley
-
Here are a couple I have recently done. Its been a while since I have posted.
(http://i573.photobucket.com/albums/ss171/troopers_01/th_DSCF2086-1.jpg) (http://s573.photobucket.com/albums/ss171/troopers_01/?action=view¤t=DSCF2086-1.jpg)(http://i573.photobucket.com/albums/ss171/troopers_01/th_DSCF2097-1.jpg) (http://s573.photobucket.com/albums/ss171/troopers_01/?action=view¤t=DSCF2097-1.jpg)
-
CQMD, those are really fine looking holsters. I went ahead and looked at the rest of your work on the photo site, really fantastic stuff. Thanks for the pics and inspiration, JD
-
Like JD said, beautiful workCQMD, thanks for sharing, I'm one for making my gun leather look old too, great job, and welcome back.
Regards
tEN wOLVES ;) :D ;D
-
Howdy, CQMD. Those holsters are very nice. The border stamping on the light one is great. The spots look good with the dark color on the other one. Good seeing you again.
-
Howdy CQMD,
I'd sure echo everyone else's comments. That is some beautiful work you have posted. Many thanks for sharing this with us.
-
CQMD,
+1 on the rest! ;D
-
Here is another practice Holster just finished. This one was in the Walnut dye for twenty minutes followed by three coats of Neet's amd one coat of Skidmore's. I learned not to let the Holster dry with the pouch left in the loops. Got a some uneven color on the pouch.
Special thanks go to Cowboy WC for sending me his excellent instructions on the use of the meander stamp. It is very generous of WC to share his talent and expertise.
Special thanks also go to Ten Wolves for his continued help and encouragement.
-
Howdy Johnny McCrae :D ;D :D
Wow this one came out great, nice color too, you did a bang up job on your meander work, that and the rest of your choice in stamping tools , the border and the loops look great, and tha USFA SAA looks right at home sitting in it. :o 8) You make me proud Pard, keep up the great work. :D
Best Regards
tEN wOLVES ;) :D ;D
-
CQMD Thats some fine leather u put together. I really like the dark rig. KT
Johnny that a nice color but I really think you out did your self with your stamping. Keep it up. You know by looking at my rigs I,m a stamp NUT. ;) :D ;D KT
-
howdy pards here are 2 pics of the 1851 Jesse James holster
im yet to decide a color for it but here it is
enjoy gang
Cowboy316
-
Very nice C316, as always your carving is beautiful ::)
tEN wOLVES ;) :D ;D
-
Good job there Cowboy. How is your website coming along?
-
Howdy Pards,
CQMD,JM, cw316,
You guys are kickin out some SUPER AWESOME leather!!!! :o :o :o :o
Keep up the good work!!!!!!
Later
ACE
-
Cqmd, very nice work on your rigs
Johnny, I like your stamping it came out real good. I also really like the shape that you chose for the holster. You did a very nice job on it.
Cowboy, very nice job on the incise carving. I am starting to really loike that style.
-
Many thanks for the kind words Pard's.
Howdy CW316,
Outstanding job on the Jesse James Holster! Look forward to seeing the finished product. Thanks for sharing this with us.
-
Here is a pair for my 1860's.
Very form fitted. But they slide in and out real smooth.
[Dead links removed by moderator]
Doc
-
Now thats what I call not wasting leather ;) They look great Doc, I really like a simple classy border.
-
Thanks GB.
I also made a simple 2" belt to match along with a cap pouch.
Not real happy with the cap pouch my rework that. The pouch needs to be a little heavier
leather.
Doc
-
Classy looking holsters Doc, you did a nice job on these. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
C316,
WOW, that is just gorgeous!!
Doc.,
Great pair of holsters! I sure like the Slim Jim style.
-
Howdy JM
Very nice job on the holster.
316
Another nice piece you've put out.
Doc
Great pair of Slim Jims.
WC
-
Cowboy that will a nice looking holster when its finished. Looks great now. KT
-
316. I like the carving. Looks good.
I've GOT to learn how to carve.
Doc
-
Howdy Doc O,
Great looking set of Slim Jim's! My favorite style of Holster. Thank you for showing them to us.
-
Howdy CQMD, mighty fine leather work nice over all balance.
Johnny M, I have been following your work for awhile now and you are very talented my friend.
316, Isn't that a fun carving pattern? You nailed it cowboy.
Howdy Doc O, The molding and coloring of those slim jims are really nice I like those holsters a lot.
Thanks for sharing
Wiley
-
That holster is really nice, Johnny. The meander is definitely done right and looks good with the small floral stamp at the ends. The spots add to the overall look. Nice work.
Cowboy, that JJ holster is really nice. Very smooth work on the tooling. That'll look good with any finish you choose. Very good.
Those holsters are clean and lean. That's a good look, especially with the color you have. The molding is done well. Very nice work.
-
Heres something I just finished. Friend of the wife wanted the holster to be wraped with stainless like the back of her saddle. Not real happy with it . Cant regulate the curves for spacing like you can wirh leather. I sent her a pict. and told her we could throw it and do a braided one but she likes this. KT
-
Overall the holster looks great. While the wrapping my not be my (or your) cup of tea, A+ for giving it a try. I can't even imagine what it took to wrap that. Amazing, JD
-
I've worked with stainless a lot. Not with leather, but building machinery. How many band-aids did the job take? ;D It's an interesting holster. You certainly did tackle a different project. The finished item even looks fine. I agree you get an A+ for doing it.
-
Marshall the inlaid is easy next to the stainless. I wore tight deer skin leather gloves and used needle nose pliers and still raised heck with the glovers. No cuts Thanks JD and Marshall. Not the best looking. Now I have to make a belt and wrap the whole thing. It should be easier with out the square corners. Projects like this sort of takes the fun out of it. KT
-
I'm like the Marshall, I only did it building machinery.Looks good.How you liking that way of doing inlays pard?Dave
-
Howdy KT,
That is a nifty looking holster! Well executed! Your workshop produces the largest array of designs and looks I've ever seen. I don't believe you have ever met a material you couldn't work with. Thank you for sharing this talent with us.
-
Nice work Ace,hope yer shoulder gets better.
I'm just finishing up a holster today, like Ace I use natural dyes and hand stitch all of my projects.
My new Mancave is working out just fine, I can stretch out those long belts out and getter done. ;)
Slick
-
Kid, its a great looking holster, you did a very good job on it. Bet you don,t want to make another one ;) ;D
-
Kid, I think this holster looks great, the angles look right for an easy draw, your inlay is perfect, just the right amount of bling, I know you wanted to put more bling on it, but it looks nice the way it is, WELL DONE Pard ::) :o 8) and those people in the parking lot were just doing what anyone would do to stay warm. :P ::) 8) ;D
MERRY CHRISTMAS
tEN Wolves ;) :D ;D
-
KT, now that's a one of a kind! Very nicely done.
Wiley
-
Just finished a Slim Jim in a period look. Lined it also and wet moulded to the pistola. The stain is Eco-Flo Java Brown.
AZ Cattleman
-
Excellent work there AZ Cattleman. I really like the color. I've not tried a Slim Jim yet, but one of these days!
Thanks for sharing, JD
-
Very nice, AC. The clean lines really look good. That finish is very suitable. Nice work.
-
Howdy AC
Good Lookin Slim Jim. Keep up the good work.
WC
-
AC, very nice simple clean lines and the color is great. You did a fine job Pard
-
Thanks Pards, I am going for the old cowpoke that during the winter makes his own rig to wile away the long hours in the bunk house...... I don't know if any did this, but maybe....
AC
-
AC, take it from one who spent a few winters around a bunkhouse they did alot of making and repairing of their gear.
-
Nicely done AC, it looks good Pard
tEN ;) :D ;D
-
Howdy AC,
Great job on the Slim Jim. It will look real good and right at home with your new Yellowboy. Many thanks for sharing this with us.
-
Thanks to everyone for the nice words.
AC nice job. Great color. KT
-
Heres my picture album . Now I have to start getting some picts. for it. KT
-
Very nice album, Kid. Mending the barbed wire fence is a good theme idea. You carried that out nicely.
-
I love it Kid. I spent many days fixin' fence and I "ve got the scars to prove it. You did a beautiful job of capturing the moment.
-
Howdy all! Seems like such a long time since I darkened the door of this heer bunkhouse. Been fairly busy, so don't hold it against a pard. I miss all of ya'll!
This was a project I just finished, and I shot some pics of it while I was adjusting it. It was not slicked or final-oiled, so please overlook those issues. :D The pistol is a S&W Combat Masterpiece owned by Payton Miller. Not sure if you guys know who he is or not. He's the editor of Guns & Ammo.
(http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20375_103101949715204_100000461974144_79743_859206_n.jpg)
(http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20375_103101953048537_100000461974144_79744_7873953_n.jpg)
(http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20375_103101956381870_100000461974144_79745_1375538_n.jpg)
(http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20375_103101963048536_100000461974144_79747_8136203_n.jpg)
(http://hphotos-snc3.fbcdn.net/hs176.snc3/20375_103101966381869_100000461974144_79748_3925176_n.jpg)
(http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20375_103101969715202_100000461974144_79749_6458884_n.jpg)
(http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20375_103101973048535_100000461974144_79750_2308104_n.jpg)
-
Different ,very different , but I like it. Is that a snap on the back strap for quick release?
-
Yeah. It's a thumb break.
-
Howdy KT,
That is beautiful! Another great work of art from your busy workshop. Thanks for showing it to us.
Howdy RT,
Now that's a good looking, rugged Holster! Nifty design for the belt loop! I sure like your maker's stamp. Thanks for sharing this with us
-
Howdy ALL :D ;D
KT, that is a neat looking photo album, the carved front with cowboy and horse really came out great. The barbed wire fence theme is a good one too, and you carried it out real well. ::)
RT, nice but different design on this holster, but I can see where it would work out real well, I think we're all use to seeing softer curve lines, this is one of those holster that would grow on you, the adjustable safety strap isn't a bad idea, along with the thumb break safety, you put in a nice grip forward cant that will also work well for this type revolver, you did good pard, and it's good to have you back with us, we'll look forward to seeing this one finished.
Regards
tEN wOLVES ;) :D ;D
-
Howdy
KT wonderful job on the album.
RT good lookin holster.
WC
-
RT nice job on the holster. KT
-
RT, that is a fine looking holster. I'm not up on this type of deal, though I recognize the term thumb break. I assume when needed quickly with the flick of a thumb it breaks open?
Can you tell us how your friend's wife is doing? If you posted anything about it I missed it.
Thanks, JD
-
That holster is a fine one. Nice clean lines and it's a little different. Very cool.
-
Would that style work for an old Luger?
-
Hi JD. Mike Ulrich's wife passed. I thought I sent off an email, although some of my emails have been getting either bounced or dropped in the junk mail folders lately. Something to do with the ISPs and beign sent out in bulk, I suppose. They didn't honestly expect her to live much longer, as she was pretty beat down by the blood infection. So while it is very unfortunate for him, she's in a much better place now, and is feeling no pain. As an aside, she and Mike are born again christians, so one day they will reunite, and that is undoubtedly a comfort to him.
As for the lines and design, I more or less approached this one from what your typical service-style revolver would need. It'd need a thumbreak, and a covered trigger and lines that would look good on a policeman's uniform. The thumb-break makes it a little tougher to remove or fire accidentally, should the law enforcement officer using this holster get hung up in something, or should a bad-guy attempt to try to remove it from the holster. In the third picture down, you can see where my thumb is resting on the 10 oz. leather sewn to the back of the holster pouch. Pressing against that will pop the snap, releasing the break, allowing the pistol to be drawn and aimed. The forward cant allows it to clear leather faster, and the whole holster sits with the hammer spur facing out away from the body slightly due to the placement of the belt loop strap. This is so that it doesn't catch up in a shirt as easily. The trigger guard is covered as well, for safety's sake, but instead of sitting in the pouch deep enough to contact the grips, it sits a bit higher, giving the hand enough purchase on the grip to draw, and leave the index finger sitting in a safe position.
I'm no fast draw, but I tried seeing how fast I could unsnap the break and clear leather and draw down on someone, and it's suprisingly easy for a holster this snug. Sometimes you get really lucky with the fit :) .
As for the lines being a little less flowing and graceful, I was working from the old Civil War military holsters, and the flap-style service holsters that law enforcement and military personnel used to wear. No real swoopy lines there, just common sense, crisp straight edges that worked well with the lines of a uniform. Underneath the buckle billet, there is a second scallop, so it's not totally devoid of grace. Hehehe. And speaking of the buckle, most of these are fitted for a specific pistol, but some that I have seen are adjustable like this one is, in the off chance you want to house a different pistol in there. That's also why it has a more generous pouch to it, and a little longer length to the barrel. You guys are gun guys. You know how some gun guys swap pistols like the swap socks.
So that's the nickel tour.
And yes, Rick, I think this would work with a Luger, but most Lugers I have seen have been in flap style holsters, but you could strap the break across the top at the same place you would on a 1911.
Now ... on to say that Kid, that carving on fixing the fence is perdy doggoned awesome. My mom did a painting of myself and my daughter fixing fence called, "Take your daughter to work day" ... I don't know if it's quite as cool as that one though. Very nice work!
Still snowing here in Illinois, so I've got another holster to work on for my ferrier (long overdue, too) and I think it'll be just warm enough in the workshop to spend a few hours and a pot of coffee sitting there working on it. Hope the rest of ya'll are staying warm.
-
RT, your holster finished up real nice Pard, your friend will be proud to wear it.
Regards
tEN wOLVES ;) :D ;D
-
Terry, what a GREATjob on that album. You nailed that baby, a perfect picture. I would not know whre to start doing that, since I'm still trying to finish a decent holster.
Good job Pard, JDl
-
I agree withJD ... I can do a decent stamped design, but carving is like writing in Chinese to me. That's some skill there!
-
Just finished two more slim jims. I will do a new cartridge belt next week. The first one I did I lined but found that I should have allowed for that in the pattern, so the front site is pretty tight. I think I can work it out but these two are a smother draw. Does any one wax the interiors of the holster and if so what do you use?
AZ Cattleman
-
Hey AC, those finished out great Pard. You did a mighty fine job of matching the color on them and they have really nice lines. You got a real good handle on this leatherwork.
-
Thanks GB, I wonder if everyone that fits a slim jim to an SAA has the same fitting problems....
AC
-
AC Great set of holsters. Really like the color. KT
-
Those look good, too, AC. Nice job.
I never wax my holsters. I just mold them to a friction-free slip fit.
-
AC, your holsters look great, you did a fine job Pard, I don't use anything on the inside of my holsters in the way of wax, on Slim Jims, I choose not to line my holsters, I just like the way they feel without lining, all my fitting is done when I do my wet molding, I work the
gun in and out until it goes in and out with ease, just remember if you line your holster, you want to add about 1/4" on the sides of the bucket, adding a 1/4" on sides works well if you stay between 8 and 10 ounces of combined thickness of your liner and the front side of your leathers, if the two pieces of leather are going to be over that, you will have to add a little more than the 1/4" on the sides, IMHO, :D keep up the great work Pard, we'll all look forward to seeing the belt you're making for these holsters.
Regards
tEN wOLVES ;) :D ;D
-
Howdy AC
Very nice job on the Slim Jims. I've only lined one and that was for the big Walker.
WC
-
Howdy AC,
Great job on the slim Jim's! Those Holsters have a very elegant look to them. Slim Jim's are my favorite style to make. Many thanks for showing them to us.
-
Hi Pards, First off I hope everyone had a good holiday so far and hope all of you have a great upcoming 2010... :)
Here are some pictures of a knife sheath I just finished for one of my shooting pards. This is the first time I am attempting to use the "braid stamp" that I got from Bob Beard several months ago...this is the stamp that our good friend WC uses alot on his holsters and sheaths. When WC, first posted a picture of a holster with this stamp I knew I had to have one of those stamps. Has a little learning curve to get the alignment but once you figure it out the process goes quickly.
-
Howdy Outrider
Very nice job with the braid stamp. Looks good.
WC
-
WC, Appreciate the comments..after all you are the one who got me interested in that stamp....I will definately use it again
-
Outrider thats a good looking sheath. He should be happy.KT
-
Heres a old style I just finished up on. KT
-
Outrider, thats a good looking sheath! I like that stamp too!
DM
-
Outrider, that is a fine looking sheath. That stamp is the bomb! Barry King and Chan Geer both have similar stamps, but I wasn’t enamored with them, partly because of the dots or spots if you will that they make. This stamp from Bob beard really makes a nice impression and design.
Kid Terico, another great looking project. I am amazed at the speed that you do this, along with the quality and design of your rigs.
Thanks guys for sharing your work, JD
-
Outrider, nice job on that sheath Pard, and that stamp looks like the ticket. ;D
Kid, as always cool stuff.Dave ;D
-
Very nice sheath and knife. :)
-
Outrider, this sheath is a beauty, I've been trying to get that stamp for two years now, I can see it was worth your wait, nice work pard. ::) :o 8)
KT, beautiful holster, great color and the placement of spots is outside the box, I like the whole rig, just my game. :D 8)
Thanks pards for the look see.
Regards
tEN wOLVES ;) :D ;D
-
That braid stamp looks realy good, Outrider. Nice job. Looks particularly good in black, too.
Kid, that rig is a fine one. TW said it about the spot placement. It's original and effective. Great color on it, too.
-
howdy gang
just wanted to p[ost saying how you pards have been very busy and every thing looks good
hope to get back to the bench after i get my new one put together will have pics as soon
as i get it set up
great work guys keep it up
Cowboy316
-
C316,
Hope it goes together real easy!! ;D
-
Outrider, beautiful work. I really like that style and as Marshal said it does look good in black. You must have practiced enough cause that stamping looks fine.
Kid, good looking rig. Very subtle contrast to your colors it looks great.
-
Howdy Outrider & KT,
That's some beautiful work you gentlemen have posted! A genuine pleasure to look at! Many thanks for sharing your talents with us
-
Thanks to all of you. KT
-
Hey Terry, you don't sleep do you? :o Another sharp rig
-
Great job guys! Terico, where did you find that cool buckle?
-
Hi Santee, ebay KT
-
Here's one I just finished for the Great Western 44.Dave :)
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/holster30.jpg)
-
Great lob Dave, looks good. You should really do one with inlaid. :) ;) :D ;D ;DKT
-
Very sharp Dave, VERY Sharp!
-
Nice work Dave, those brass spots compliment the snakeskin real well, that is one snazzy inlay pard, thanks for the look see. ::) 8) ;D
tEN wOLVES ;) :D ;D
-
Really good work, Dave. You centered that skin in the spade beautifully. Very nice.
-
Howdy Dave
That is a good lookin holster.
WC
-
WOW, I thought I had been on here regular lately. How'd I miss all this very fine leather work??
KT, The album and gun rig are absolutely ART work.
AC, mighty fine leatherwork on those Slim Jim's.
RT, that holster shape is different and different is good. Very well done.
Outrider, The kinfe sheath is very well balanced, wish I could get perfect spacing on my stamping like that. Mighty purdy.
Dave, I agree you should try inlaying bet you'd be good at it. Good job cowboy!
Wiley
-
A FINE looking holster there Dave! ;D
-
Howdy Dave,
Beautiful work! That insert really compliments the grips on the pistol. Thank you for sharing it with us.
-
Snakes, gambling and gunleather ... does it get any better? Sure it does. Dave Cole added spots just to prove it does! Awesome work pard!
-
Beautiful inlay work, Dave!!
DM
-
You outta see the snake huh Dave :D Nothin new but this brand new tatoo ???
Nice holster,i gotta stop lookin at this stuff,i can't afford it.. :'(
-
Thanks pards for the nice comments.Now if I find the time between orders maybe I can start a belt.Dave ;D
-
I wear a size 38-40 :P
-
If I could afford to pard, I would.Being unemployed ain't fun.Dave ;D
-
Hey Dave , got in here kind of late but I would say if you are trying for perfection you can stop now. ;) Beautiful work Pard.
-
Dave, Outstanding.......and you gave me some ideas ::) ::) :D ;D
-
Whoa! with all the fine leather put on the table lately dare I show this rig. However, like they say if you're gonna run with the big dogs ya can't just sit on the porch. This is my Christmas present to myself for my 1875's.
Wiley
-
Beautiful color Wiley!!! They look great!
DM
-
Very nice Christmas present, they look great.Dave ;D
-
How do Wiley :D
Those 1875 Remi's look right hansom sitting in that beautiful rig you made, well done pard, it really looks nice, I like the color too.
Thanks for the look see
tEN wOLVES ;) :D ;D
-
Howdy Wiley,
Excellentl job! I'd say you are certainly running with the big dogs. I know a lot of people who would love to see that beautiful rig under their Christmas tree. Many thanks for sharing this with us.
-
Howdy WD
That is a good lookin rig. Something to be proud of.
Not only are you runnin with the big dogs your up front.
WC
-
WD nice rig. Your getting very good at your carving. KT
-
Wiley, i wear a size 38-40 put harmonica loops on mine :D :D ;D
-
WD,
Lookin mighty fine!! Be proud of your work. ;D
-
Wiley. it looks to like your gonna give them big dogs a run for their money. Great job pard
-
That new rig looks really great, Wiley. That could be right out of a saddle shop in the late 1800's. Nice. Very nice.
-
Dalton, Dave, TW, Johnny,WC, KT, GunClick Rick, Dr. Bob, Gun Butcher, Marshall. Thanks all you good cowboys for the kind remarks ya made my day gald ya'll liked the rig. Happy New Year!!
Wiley
-
Son of a gun Wiley, those are first rate holsters. The color is really amazing and the carving looks great too. All the way around a killer rig! JD
-
This is a practice holster on a number of levels. Thanks to the Canelo Kid for this pattern. I made the back a little wider than the pattern called for so I could practice putting on some spots. I realized after the fact that the stitching should have gone up higher, so that’s another learning experience. I’m going to put a few stitches in between the first two spots to tighten up the pouch.
This is my first attempt at spots, and I learned a lot about it, with several mistakes. I’m not real pleased with the look; the size of the spots seem a little too big for the size of the holster, and they look too close together to me.
This holster spent a couple of days in a walnut dye bath, and now it’s dry enough for some oil. This is the first time I’ve tried the walnut dye, so I don’t know what to expect. I know I need to oil it and apply some Lexol or something like it. It is darker than the picture would lead you to believe.
If someone reading this with experience in Walnut dye wants to give me some advice I would appreciate it. I’m going for an older looking finish, so I’m not concerned about the bleed around the spots, but for future reference, would it make sense to put the spots on after the dye?
Believe me I recognize that this one is a little rough; I didn’t spend the time to be real careful. Most guys don’t post on this thread unless the project is done, but I’m looking for some suggestions, so I posted early. I didn’t feel it warrant a thread of it’s own. Any suggestions to help me improve are most welcome. I JD
A Special thanks to 40 Rod for this 1911 Model gun. Thanks Kid Terico for calling me with your excellent advice after seeing this post.
(http://i165.photobucket.com/albums/u51/HarleyPastor/spot1911.jpg)
-
Howdy JD
I think you did a great job.
What size belt will it fit?
WC
-
Thanks WC. A 2 1/2 inch belt works fine. I've still got some work to go in finish & burnishing the edges. Hopefully it will improve the look.
-
Looks good to me JD, you did a nice job, spots are what ever you want them to be, that goes for size too, I do the spots first, then sew, then dye, then finish and burnish, depending on how strong your dye is, you can leave your leather in as long as you want depending on how much pigment you want in the leather, this can be as little as a few hours to several days as I do mine, once you take the holster out of the dye, you want to wet mold and then let dry thoroughly, apply some Lexoil conditioner and let sit for a couple hours, then do your oil and finish depending on what type finish you want. this is just my opinion and how I do it.
tEN wOLVES ;) :D ;D
-
I appreciate you sharing the way you do things. In talking to people about spots, it seems some guys apply them before dying the holster, while others wait until they've dyed the work. Evidently both methods work.
So 10 Wolves, if you put the spots on before you dye the holster, do you have problems with bleeding like I see on mine at this point? If so, what do you do about it?
Thanks very much, JD
-
JD, Ten Wolves is right spots are relative to the man that puts them on. Yours don't look bad at all and I have seen bigger ones on small rigs alot closer together than yours. You did good Parson. I actually like that style for the 1911 better than any I have seen.
-
I appreciate you sharing the way you do things. In talking to people about spots, it seems some guys apply them before dying the holster, while others wait until they've dyed the work. Evidently both methods work.
So 10 Wolves, if you put the spots on before you dye the holster, do you have problems with bleeding like I see on mine at this point? If so, what do you do about it?
Thanks very much, JD
Most of the time when I do spots on the bucket its self, I do a lining, if you do this on an unlined holster you still want to do the top of the bucket because it's way to hard to put spots at the top of the bucket when the holster has already been sewed, the tines need to be punched down so that they don't lie above the surface of the leather, this helps in keeping the scratching down. I don't worry about bleeding, the natural dyes for me make the leather look old and used, which is what I'm after, I like this look and that's what I go after, as far as bleeding goes, after you do your oiling the leather will take on a whole different look, you just need to get your feet wet with this method, and I think you will learn to really like it, you can always add some Fiebing Walnut Stain and add some Neatsfoot oil to it to deepen the color where you want, the possibility's are endless for color. here is a couple holsters of Johnny McCrae, both done in natural dye.
Hope this helped
tEN wOLVES ;) :D ;D
-
Thanks for the nice comments JD. I think your holster looks fine pard. The spots look to be a good size and the spacing is great. I really like the style it will look real good when you get it all finished. Remember there is only one rule in leathercrafting and that is there are no rules. I very seldom do anything the same way twice, hmmmm now I know my problem!! YEEEEHAAAA
Wiley
-
I like spots,i'd be proud to own that JD,glad to know a Pistol Packin Preacher too.The first thing i want god to say when i get to heaven is "45s isle 10-----------> ;D
-
That holster looks fine, JD. A little dye and it'll really take on a patina. Those spots will add to the overall appearance. Good job.
-
Howdy JD,
You did a great job on the 1911 Holster. I really like the design and how you positioned the spots.
TW is right on the money. Once you start applying the Neet's or EVO or Lexol you will be amazed how the appearance will change. Usually when I use Walnut dye I'll throw in a few scrap pieces of leather from the same hide as the unit I'm dyeing. I use the scraps to experiment with.
Attached is a picture of one that I used Neet's around the stamping to high light it.
-
Johnny M.,
That is one fine looking Slim Jim!! Ya done real good there! I like it a whole lot!! ;D
-
Johnny, I like that one ,nice simple well thought out design on your stamping. It looks great
-
JM nice job of oiling for contrast. I use it all the time. KT
-
Johnny, just right well balanced good coloring very nicely done. Thanks for sharing.
Wiley
-
JD, nice 1911 rig!! The spots look great too! A little bit of color and that thing will pop!
DM
-
Johnny, that looks nice with the oil just around the border. How long does the neetsfoot oil stay at the border without migrating into the rest of the leather?
-
Howdy Marshall,
On that one I put the accent oil on with a Q-tip just in the area I wanted to accent. I left it sit for a few minutes then wiped the excess off. To be honest, I never seem to get exactly the same results. I'm finishing another one now and I'll be posting it.
-
WOW :o :o :o :o
You Pards are doing some AWESOME leather work!!!!
Keep it up!
ACE
-
Ace good to see u post. KT
-
(http://)http://i995.photobucket.com/albums/af79/countrytoby2/GUNBELTWITHEXTENTION0022.jpg(http://)http://i995.photobucket.com/albums/af79/countrytoby2/GUNBELTWITHEXTENTION0012.jpg(http://)http://i995.photobucket.com/albums/af79/countrytoby2/TOBYSHOLSTERS.jpg
Well it's like this, I gained alot of weight. I just didn't feel up to making a complete new gunbelt, so I got to thankin about one time when I got one of my older horses in out of the pasture. This hoss hadn't been used in quite sometime. So when I saddled him up the rear girth wasn't long enough. So, me being the cowboy that I was and knowing I must improvise. So I made an extention for each billet for the rear girth. Had to make 2 so the girth would be centered. Anyway my gunbelt got too short so, I made an extention for it on the same basics as the girth extentions. I hope you can open these pics. I wanted to post this just in case someone else had the same problem that I have. I should have my back surgery pretty soon and should be able to lose some weight and maybe not need the extention. Thanks for reading this, Texas Toby
-
TT looks good, quick easy fix. Thanks for info. KT
-
Toby thats what I call A good idea, and that whole rig looks pretty nice. Very clean lines. Good to have you with use and looking forward to seeing more of your work
-
Howdy Toby
This is something that should help us well nourished pards, beats making a whole new belt, good luck with the back surgery, seems we have so many pard suffering with back pain these days, I hope it will be a better year for you all.
Regards
tEN wOLVES ;) :D ;D
-
UH OH,after they did my surgery i couldn't go tinkle no more :-[
-
::) :o Ricky, that's WAY too much information!! :D
-
Thanks for the information, Johnny. I was just wondering if you have had any experience with this technique over time.
Toby, that's a good solution to a shrinking belt. Good idea. Thanks for the post on that.
-
New Knife sheath for my slim jim rig, still need a belt.
AZ Cattleman
-
Very nice work AC. I really like the color and your stamping looks nice and even. Good lookin knife also.
-
Howdy AC
Good lookin sheathe for that knife.
WC
-
AC good looking sheath. KT
-
Thanks Pards, still have to put a finish on it, just waiting for it to dry. When I bought the knife I should have looked at it a little closer, as it appears to be a lefty. The handle tilts out when carried on the left side, but in on the right side. May need to buy a different knife and sell this one. The life of the cowboy, like buying new guns when ya can't hit the targets anymore....
AC
-
Texas Toby, good thinking cowboy and good leather work.
AC, good lookin sheath.
Wiley
-
Hey Ac, I got an idea for ya. Use that as your crossdraw and that great big pigsticker you got for the strong side :o ;) ;D
-
That be fine, until someone draws on me. Blade VS Lead..... I think I'd lose that one. ;D
Thanks Wiley....
AC
-
AC "Just like a dumb -------- bringing a knife to a gunfight."
Sean Connery in Elliot Ness ;D ;D KT
-
Texas Toby,
That's a pretty Nifty idea!
AC,
Beautiful job on your Sheath!
Thanks for sharing your work with us.
-
Very nice AC, us lefty's love them lefty knives ::)
tEN wOLVES ;) :D ;D
-
For the past three years I've been using a cross-draw setup with .38 special 1873 SAA pistols in a 7-1/2" barrel length. I've purchased a USFA and a Great Western II 1873 SAA's in .45 Colt in 5-1/2" barrel lengths. I want to switch over to a right hand/left hand strong side rig.
I’m in the process of developing a rig that will be easy to draw and holster the pistols with and yet be period correct. Right now I'm making a series of practice holsters and trying different designs. This one is a Mexican Loop with the pouch dropped a bit and a slight barrel forward cant. I have found some Holsters in Packing Iron with slight barrel forward cant’s. Attached are some pictures. One shows the holster before dyeing. The second shows the holster after soaking in the dye for twelve hours and the first coat of Neet's. The last picture is of the completed Holster with two coats of Neet's and two coats of Skidmore’s. One of the things I really like about this method of dyeing is the ease of use and the evenness of the color one gets. I must say that the Holster does not start to look good until you get to the final finishes.
I ‘m not sure yet if I’ll end up with a Mexican Loop style or Slim Jim style.
Ten Wolves has been a big help to me on the use of Walnut Dye’s and we have had many conversations on this subject. Each particular hide seem to take on it’s own appearance after dyeing. This used to be an issue with me. Ten Wolves and I have talked about how appearances can change from holster to holster. We agree the "no two holsters looking the same concept" is the charm and uniqueness of the custom hand made leather work we all do.
As I’ve mentioned, one big advantage and benefit from making one’s own Leather is the ability to design and experiment. You can get a rig tailored to your own taste and requirements.
-
Johnny, that looks great. Working with natural dyes has made me nervous more than once but you are right about not knowing what you have until you are finished. The outcome is usually worth the trouble and it looks like that is the case with yours. I really like that color you ended up with and your design and stamping is first rate.
Thanks for showing use a little bit of the process. It really helps.
-
Johnny M I think your definately on the right track. Thay color is great. nice job. KT ;)
-
Howdy Johnny
Nice explanation of the process , and the photos show the different steps involved, keep us up to date on your progress with developing a new rig for yourself. Johnny, this is information a lot of pards will appreciate, the beauty of using natural dyes is as you said, the color is uniform and has a beauty you just can't get from a bottle, you can make new gun leather and still have the look of old, I fine I'm using this type dye for almost all my work today, unless some one request something different, and like you said each hide is a little different, varying the amount of hours the leather is in the dye, and the amount of coats of Neatsfoot oil or EVOO, you can really create your tone/shade/color, if you wanted to do some deepening of the color, you can mix a little Fiebings Walnut stain with either oils and use this in areas that you want a little darker, the oil will darken too, but the stain will also add something nice too, and of course you're not limited to these things, you can also high light with reg. dyes too, but the best part with the natural dyes is you really don't need anything else, just oil and finish.
We'll look forward to seeing your new rig when finished, I know it will be a nice one.
Regards
tEN wOLVES ;) :D ;D
-
Howdy JM
That is good lookin.
Coloring leather can be one of the biggest pains there is. I tell all my students it is one big crapshoot. I wish I had the time to play with the natural dyes but from a business standpoint I can't waste that much time.
I've been very lucky when making custom items for customers that require many pieces of leather that the colors have come out a close as possible.
Keep up the great work.
WC
-
The knife sheath looks good, AC. That'll look good with the rig. Good work.
Very nice dye job, JM. I like that color with the spots. I like the color without 'em, too. Those natural dyes just look good. No getting around that. I kind of like the crap shoot. The natural dyes have a luster that looks fine no matter what the final color is. That rig will be outstanding when you get it done.
-
Awesome Johnny. Really liking that color, too.
-
Johnny, the design of that holster is very good looking forward to seeing the whole rig. Knowing your work that rig is going to be a beauty. One of these days I am going to have to try a natural dye, from what I've seen you and other do, it really turns out purdy.
Here is the knife sheath for that rig I showed a few days ago.
Wiley
-
Wiley, I'm sad that I don't live close enough the give you the highest flattery! The highest form is flattery is theft! :o ::) :o Looks GREAT!! Ya done real good there! ;D
-
Wiley, your sheath is beautiful, it will look great with that new rig, and the color is nice too,
Regards
tEN wOLVES ;) :D ;D
-
Wiley nice sheath. You done yourself proud. KT
-
Wiley, great looking sheath, especially the color.
WC, I understand what you are saying, but if color is a Crap Shoot, then your sure know how to throw the dice!
-
Nice sheath pard.Dave ;D
-
Howdy Wiley
That is a mighty fine sheath.
WC
-
Wiley, great looking sheath, especially the color.
WC, I understand what you are saying, but if color is a Crap Shoot, then your sure know how to throw the dice!
Howdy JD
After all these years the one thing I know for fact about coloring leather is don't count on it.
WC
-
Boy have I learned that one!
-
Howdy Wiley,
Outstanding job job on your sheath! That's a nifty design and it gives the Sheath a great look. Many thanks for sharing it with us.
Just a note on the last Holster I posted... I tried it out and it did not turn out or function the way I wanted it to. The pattern was made for a barrel forward cant but actual Holster turned out to be vertical. It's back to the drawing board. I'm going to make a pair of Slim Jim's next with a barrel forward cant and a longer belt loop. This is the beauty of doing one's own Leather. You can keep trying until you get it right.
-
Wiley thats a great looking sheath. The color came out real good.
-
Hey all you good cowboys thanks so much for the nice comments on the sheath. Dr. Bob if theft is the highest form of flattery, then the thought of theft is a great compliment and I appreciate it pard. I certainly agree with everything that is being said about coloring leather. I hold my breath everytime I start to dye something wondering whats going to happen.
Wiley
-
I posted a picture of this spotted holster last week before any finish, it that's what it could called was applied. If you like a funky finish, then this is your holster!. I did this one to try to improve on spot setting, preparing for a 1911 holster I've got plans for soon.
The black one is another test, to see how a friend's STI 1911 would fit, and how he likes the cut of the holster. It fit like he wanted, so I'm going to build one that will go on his Mernickle buscadero rig. I'm going to try to make the 1911 holster look as close as I can to the existing SAA holster, complete with 5/16 spots.
I discovered I could not buy a 5/16 spot setter locally, so I ordered one from Standard rivet Co. along with some of their spots. They should be here by Friday.
I'm not at all happy with the look of "Spotty" but the black one is not too bad. I did learn some things from the spotted one, so I'm glad I made it.
(http://i165.photobucket.com/albums/u51/HarleyPastor/21911scropped1.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/21911scropped2.jpg)
-
JD,
They both look good to me. Glad that you learned a bunch on the brown one. The black one is smooth!! :o
-
JD, I really like Spotty a lot. It has a sort of rustic look. The black holster is really good, but just doesn't have the personality of Spotty.
bodie
-
ok pards heres a nother version of a 1911 holster i just finished up
its a wild rose pattern that i dyed with feibings yellow and green for the
flowers and leaves i dyed the back ground black then the rest is feibings chocolate
after a coat of tan coat i used an antique medium brown then Skidmores over the top
of that
enjoy and thaks pards
Cowboy316
-
JD, if anyone had asked me I would have said that 1911 would never fit in that black holster :-[ And I agree with bodie 'Ol spotty' definitely has personality and I like the look. The black one appeals to me because it has good clean lines and its a good honest no frills holster.
Cowboy, as always your carving is first rate. That dye job you did does nothing but compliment it. Great work.
-
Howdy Cowboy,
You are a true artist! Great design and beautiful job of carving! Many thanks for sharing this with us.
-
Cowboy beautiful job. Keep it up.KT
-
Usually I throw the scraps away but I thought I would see how it would work on a rig. 2 1/4 " belt. Flat piece of leather for skirt with a 2 " strap sewed on back. Holster is front half of a holster only sewed to skirt to completethe holster. Small pieces only. Very light holster with only half the leather used. .KT
-
Cowboy 316,that's damn nice,really like the color.Keep it up man your makin a nitch fer yourself,it's not over done.I may have to get a 911 now :-[
-
Kid, you continue to amaze me. You can do more with a few scraps than I could with a whole cow. That is a VERY nice rig. And it flat works ;D ;D
-
JD, both of those holsters are well done. Personally, I agree with a few others, I really like the brown one it has character. Nice leatherwork Preacher.
316, I have been an admirer of leather caving ever since I was a kid on the Texas/Mexico border where there are some mighty good leather carvers. You my friend have natural talent when it comes to carving leather. That is a beauty of a holster.
KT, Absolute art! You definitly have a creative side.
WD
-
Cowboy 316, nice work pard, the carving design and colors look good, your seam looks really nice and you burnished it well.
Ten Wolves ;) :D ;D
TK, keep them coming Pal, this one is mighty fine looking, again your use of stamps and your design are over the top.
tEN wOLVES ;) :D ;D
-
KT, that is a great design, I like the look very much. With your permission I would like to try that one soon.
AZ Cattleman
-
AC pound away old pard. ;D ;D KT
-
Cowboy 316, great job on that holster. The carving looks good, and the backgrounding really looks smooth.
Terry, you continue to amaze me with your skills, including real imaginative designs. I think that is a great looking set up.
Gun Butcher, I understand what you mean about "Blackie" being able to hold a 1911, but I'm working to match an existing holster. If you've seen one of the Evil Roy Wild Bunch holsters, they're pretty darn small, and that's what my friend is looking for.
-
Howdy KT,
WOW! Another beautiful work of art from your busy workshop. The variety of designs you produce is incredible. Would it be possible to get a picture of the back of the Holster? I'd really like to see how you did the belt loop. Many thanks for sharing this with us.
-
Johnny hope this helps. KT
-
KT, thanks for that back angle picture. I've seen that done in person, but I don't recall seeing it on this forum in the last 15 months I've been around here.
-
Howdy KT,
Thanks for the picture. This will be very helpful to me.
-
Howdy Yall !
Here's my latest attempt at leather bendin. Thought I'd throw it up here and get some critique from the talented Pards here in the leather forum.
-This'n is 8-9 oz veg-tanned leather lined with 3-4 oz veg-tan.
-Dyed with Eco-Flo Antique gel and sealed with Satin Sheen inside and out.
-Hand forged 1095 blacksmith style boot clip riveted with copper washers and a mild steel pin. Also heat treated and spring tempered the clip for flexability and durability so she'll maintain good tension without deforming or breaking.
-Stitched up with Black waxed thread.
The clip was Shotgun Steves request to keep with period correct materials and I really feel it gives that little extra sumpthin to this one here.
There are more pics in The Cutting Edge if yall wanna look.
Don't be bashfull now Pard's let me know what yall think, - Josh ;D
(http://i570.photobucket.com/albums/ss147/joshdabney/shotgunStevedagger024.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/shotgunStevedagger025.jpg)
(http://i570.photobucket.com/albums/ss147/joshdabney/shotgunStevedagger029.jpg)
-
Josh, I gotta say that that knife is darn good looking. I really like the look of your maker mark too. Very professional, easy to read, and looks vintage to boot.
The sheath looks just right with that twisted iron clip!
DM
-
Josh Nice job. I really like that knife. Nice clip on sheath.
Everyone thanks for the nice remarks. KT
-
Talked to Ace this afternoon and he sorta talked me into making another old style holster. Got one done, need to make another and belt.KT
-
That's a really nice sheath, Wiley. It matches the knife perfectly. Good work on that one.
I'm not at all happy with the look of "Spotty" but the black one is not too bad. I did learn some things from the spotted one, so I'm glad I made it.
I like both of them. They have their own appeal and spotty has real character. Nice work.
Cowboy, that two-tone wild rose holster is great. Nice job on the tooling and execution of the whole thing.
Kid, that holster with the diagonal loop is really fine. Just the right amount of bling for my blood. I like this one a lot. Very nice. The other one is good, too. Ace talked you into another good one. Good work on both.
Josh, that sheath goes nicely with the knife (very cool, I must say). The iron boot clip is a nice touch. Great stuff.
-
Thanks marshall. I desided to detune it. ;) KT
-
That is a great looking sheath Josh. Oughta keep shotgun happy. I really like that clip.
Kid, you need to give us a how you did it lecture with that one. I love the look of it . Very nice. Be looking forward to the rest of the rig.
-
Thanks GB. I sarted with 8-10 oz. wicket and craig leather. The diagonal leather I sewed over the top is 4 oz . deer hide that I dyed and the 1 in. strip on the bottom is rawhide formed and dyed and drilled for tacks. KT
-
Josh, nice sheath pard, talk about period looking, you aced this one. ??? :o ;D 8)
KT, this holster is cool, I like that fancy stitching, and the layered look you gave it, it's an original for sure. ::) ;D
Regards Pards
tEN wOLVES ;) :D ;D
-
Awesome sheath Josh, and killer holster Terry. You holster makin fellers is drivin' me in the direction of givin' holsters a shot! I's got a few ideas a brewin' ;D
-
How about an idea for a open top for a Luger ;D Without all that flap stuff..
-
Howdy Josh,
Great job on the Sheath! The clip gives it a real authentic period look. Thanks for showing it to us.
Howdy KT,
Beautiful! I know I sound like broken record but your range of design and the different looks you present are incredible. Please keep em' coming.
-
Howdy Josh,
Super nice sheath it goes well with the knife you made.
Howdy KT,
Just like Johnny said you have a very wide range of artistic abiliaty!!
The talnet that is on this forum is AWESOME. I feel previlaged to be a part of it!
keep them coming!
ACE
-
Howdy Josh, Great looking sheath and knife very nicely done.
KT, cowboy you have some kind of creativity your leather work great.
Wiley
-
You holster makin fellers is drivin' me in the direction of givin' holsters a shot! I's got a few ideas a brewin' ;D
Looking forward to seeing what you come up with, pard.
-
Awesome sheath Josh, and killer holster Terry. You holster makin fellers is drivin' me in the direction of givin' holsters a shot! I's got a few ideas a brewin' ;D
WELL John, I Triple Dog Dare Ya, >>>>>>>>> What ya think about that, anyhow if that doesn't do it, we'd love to have you join in here with your leather work, I know you will come up with something special in a holster or two. ::) :o 8)
Regards
tEN wOLVES ;) :D ;D
-
Howdy Pards,
Thanks for all the nice comments fellas. Sure do A'preciate it !
Add me to the list of folks who can't wait to see a John Cohea holster !!!! ;D
-Josh
-
Howdy Josh, I don't believe we've talked before. Your knife and sheath are first rate. I really appreciate the close up pictures. I don't know about you, but when I post pictures that clear it's kinda like runnin around in your underwear outside, everyone gets to examine your work up close :o Now if you are Chuck Burrows, no problem, but if you are like me, well that's another story.
That clip and how you set it up really looks sharp. The stiching is real straight too. Thanks for sharing your work, JD
-
Just finished my new rig for my 22Cal Colt Frontier Scout. Used the method that KT used to keep the leather to a min by sewing half of a holster to a back.
AC
-
That's a great looking rig,love the color.Dave :)
-
Here's two sheaths I just finished for two of my Bowies.One more period and one dressy.Dave
1080 steel
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/sheath112.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/knifesheath112.jpg)
Damascus and Prarie Rattler
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/sheath111.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/knifesheath111.jpg)
-
Great lookin sheaths, do you have a pic of the back of the one with the brass spots? Is the slot part of or the only belt loop?
AC
-
AC, you made a very nice KT holster there, I'm sure KT will be happy to see what you did, and that bleed knot looks good too, those 22's should be real happy.
Dave, thanks for the look see, your work is always very impressive, the inlays are really cool, they're both beautiful sheaths.
Keep up the good work pards
Regards
tEN wOLVES ;) :D ;D
-
Just finished my new rig for my 22Cal Colt Frontier Scout. Used the method that KT used to keep the leather to a min by sewing half of a holster to a back.
AC
Wonderful!
I don't suppose you'd sell the gun and holster and make a belt to match?
-
Sorry Forty Rod, thats my favorite gun, its a 1962 Colt Frontier Scout, and it shoots to point of aim like no other I have. The hammer is a bit stiff, but trigger pull is clean and crisp. Hard to find holsters for it so I made this one.
AC
-
AC, that is a great little holster. I really like the contrast of the two colors and your stamping and spot placement is picture perfect. Nice job.
Dave good looking sheaths. You do like that inlay work don't ya.
-
Howdy AC
That is a good lookin little holster.
Dave
Nice sheaths.
WC
-
Sorry Forty Rod, thats my favorite gun, its a 1962 Colt Frontier Scout, and it shoots to point of aim like no other I have. The hammer is a bit stiff, but trigger pull is clean and crisp. Hard to find holsters for it so I made this one.
AC
'
I bought one for my son in '66-'68period...a .22 magnum...and it was stolen from him in '88. If I can find another one I'll keep it until he gets older, like about 60. ::)
-
Great lookin sheaths, do you have a pic of the back of the one with the brass spots? Is the slot part of or the only belt loop?
AC
AC, no I didn't get a pic of the back but that slot is the only belt loop.I tried to reproduce one of the sheaths in the "Plains Indians Knife Sheaths" book. Thanks for the nice comments pards.Dave :)
-
Thanks, Dave
AC
-
AC great job on the holster. Nice color . Makes for a light rig. Really like your design.
Dave nice job on the sheaths. Like the one with the spots best.Wouldnt u know. ;) ;D KT
-
Thanks KT, still not your quality but gettin there. It did take a little rethinking as too the process, but I like the way the holster comes out. Thanks for letting me copy the technique.
AC ;D
-
'
I bought one for my son in '66-'68period...a .22 magnum...and it was stolen from him in '88. If I can find another one I'll keep it until he gets older, like about 60. ::)
:D :D :D
-
AC my pleasure. KT
-
Howdy AC,
That a mighty fine looking Holster you made there! Very nice design and a pleasure to look at! Thank for sharing this with us.
Howdy Dave,
Great job on your Sheaths! They really compliment those good looking Bowie Knife's. Many thanks for sharing this with us.
-
I made this Rig for my youngest son's .357 Magnum. He is going to use it for deer hunting next season. He went hunting with me for the first time when he was 12 years old. That was 27 years ago. It won't be long and he will be taking his son hunting with him.
I used 1-1/2" wide Black Nylon Webbing for the Harness assembly along with Plastic Quick Release Snap Clips and Adjusting Sliders. This gives him a lot of adjustment. The Harness assembly is attached to a removable leather insert so it can be removed quickly and used as a Belt Holster.
The finish is several coats of Neet's and a final coat of Skidmore's.
-
Johnny thats a nice looking rig. It should function very well.KT
-
Nice holster, AC. It has a good look to it. Nice color and design.
Those are good-looking sheaths, Dave. It's hard to choose which looks better. That means they're both good ones.Nice holster, AC. It has a good look to it. Nice color and design.
Those are good-looking sheaths, Dave. It's hard to choose which looks better. That means they're both good ones.
JM, that rig is really cool. I like the versatility of it. Nice work.
Thanks for all the pics, pards.
-
Howdy Johnny McCrae
This shoulder rig is really nice, and would be perfect for a large revolver, it would make a great over the coat or jacket rig, using the webbing is also a good method, and we see this used more and more in modern shoulder harness's, it's light and the width should aid in comfort on the shoulder, I know your son will treasure this, not only because it's nice, but because you made it, WELL DONE Pard. and thanks for the look see. ::) :o 8) :D
tEN wOLVES ;) :D ;D
-
Very nice design Johnny. Y ou did a great job on that one.
-
Cattleman, you are really doing good work, and especially so considering what a short time you’ve been doing this, relative to many of the other Pards on this forum. I really admire how you’ve jumped in with both feet. I remember you making that pair of chaps and saying to myself “Holy Cow, this guy is really going after it” You've inspired me to quit being so hesitant and get on with it
Johnny my friend that is a great design and a good looking set up. I believe your son will value that for the rest of his life, and pass it on to his son with pride.
Dave Cole, you are an artist, no doubt. I admire your work a lot
I made this guitar strap last night. She wanted roses, so I’ve practiced carving them to the point where I realized this is as good as I’m going to get, at least at this time. I sent her these pictures and she’s happy with it, so I guess that’s all that counts.
I’m getting some help with the color and finish, which I will talk about when it’s complete. For now I’m glad to be done with it so I can move on to something besides roses!
(http://i165.photobucket.com/albums/u51/HarleyPastor/heathersstrapcrop2.jpg)
-
Looks good JD!!!
Johnny, nice design for that shoulder rig. Looks comfy too.
DM
-
JD nice job, you are doing a nice job on the roses. KT
-
JD, that is beautiful. You have a good feel for those roses. They look great.
-
JD, Just look at yourself. That carving looks pretty durn good to me and I like the way you did your stamp placement on the rest of the strap. Great job,now just keep it up.
-
Howdy JD,
Gun Butcher expressed my sentiment's exactly. Beautiful job on your Guitar strap! Nifty design and great carving of the roses.
JD, please don't be so hard on yourself. We all are our own worst critics. I don't think I've ever made a single thing in leather that I was completely satisfied with. I always seem to find something that could have been done better in the design or workmanship of the item. Now I don't think there is anything wrong with being critical of one's own work as long as we don't take things too seriously and stop having fun. The encouragement I receive from this forum is one of the big things that keeps me enthused about this great hobby.
-
Amen Bro. Johnny.
-
Very nice JD, it should look even better when finished, your friend will be happy I'm sure, nothing nicer than a hand made guitar strap.
tEN wOLVES ;) :D ;D
-
Thanks for the kind words JD, that rose carving really jumps out at ya. Cant wait to see it stained and finished.
AC
-
Howdy JD
Hold your head up high. You did a great job.
If I get a chance I will do a short video on how I do the rose leaves. I think you will like it and will be easier to do in the future.
WC
-
Thanks for the positive feedback guys. Johnny I'm sure you are correct, I doubt I will ever do something in leather that I am entirely satisfied with.
WC I would love to see a video of how you carve those dudes.
I know I need improvement in all areas of carving, but the biggest challenge for me with the roses is the pear shading. It's not something I've done much of, so that's the main thing I'm not happy with. I need to so some research on how to use those babies better.
-
JD pard, I echo what the others have said, your work is looking fine.I look at my mentors work and say to myself I will never get that good, but he reminds me he has been at for almost 60 years, and then he says practice,practice and more practice.
Well finished another sheath for my last bowie.This style was taught to me my mentor Sandy, where the main sheath body is notched for the collar, slimming it up a bit. I also made the concho arrowhead out of Ivory.The quilt pattern tooling was inspired by my friend Paul Long.Dave ;D
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/newsheathknife1.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/newsheath1.jpg)
-
Dave as usual beautiful work. Keep it up. Why dont u put up a pict of the knive u just finished for me. Its a dandy. Every one should see it. Thanks KT
-
Thanks and no problem Kid.This one is for KT's grand daughter, and he is doing the sheath.Made from 1095 steel ,with Nickel silver bolsters and pins.Kid sent me the Redwood burl.Dave ;D
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/terrys.jpg?t=1263250072)
-
Nice work Dave, on both the knife and the sheath, and ivory arrow head concho is a nifty touch, thanks for the look see.
Regards
tEN wOLVES ;) :D ;D
-
Those look great Dave. It makes me want to have KT adopt me so I can get a knife too ;D.
Seriously the skill level it takes to make something like that absolutely amazes me. I enjoy looking at the pictures, so thanks for taking time to post them, JD
-
As usual Dave did a outstanding job. Shes in the Marines and I will be sending it to Japan for her. Thanks Dave.Cant thank u enough. ., KT
-
I'd like to see her face when she gets that Kid,bet the marine cries.. ;) Nice touch Kid..
-
AC, nice job on that holster everything about it is good.
Dave, you really know how to design a knife sheath and a knife. Beautiful work as always.
KT, being an old Marine myself I assure you she will absolutely be over the top happy when she opens the package. She will show that knife and sheath off to every other Marine she knows and some she don't know. OUTSTANDING!!
Johnny, That shoulder holster will do the job.
JD, Your leather work is good. Looking forward to seeing that guitar strap when it is all finished.
Wiley
-
Dave, I really like that bowie and sheath. Good honest lines and very clean workmanship. The one you made for Kid's granddaughter is absolutly Bodacious. She is going to flip when she gets that. Kid, You did real good when you got dave to turn on the talent for that one. WOW :o
And now for me. This is whats been keeping me busy for the past few days.
Done for a Pard from the forum and hopefully my design will make him happy.
-
GB thats a awesome job. Great design. If he doesnt like it call me. ;) KT
-
Heres one I made for my 48 year old son. He wanted snake inlaid. KT
-
One more. KT
-
Now that one is sweet Kid. Great job!!!!!
-
Thanks for the kind words pards. GB, I really like that sheath,very cool design and great execution.Kid as always pard, great and you know I love inlays.Dave ;D
-
Dave you do a lot of inlaid. How do u get the snake to hold still while you skin it? That was the hard part. ;D KT
-
Kid, he's on a one man crusade to rid Florida of them ugly snake critters ;) ;D
-
Gun Butcher ;D
That's a dandy of a knife sheath, just right amount of everything to make it believable, my hat's off to ya pard. :o :D 8)
tEN ;) :D ;D
Kid Terico, I see you've been at it again, beautiful rig, your Son will love it, and that knife for your Daughter WOW, what a beauty, Dave is an Artist in his own right, well done Dave. :D
Regards
tEN wOLVES ;) :D ;D
-
Hey Kid, just gotta offer'em a beer pard ;D
GB, I'm trying pard
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/Snakeskin1.jpg)
Thanks for the kind words TW
-
Hey KT, that looks like a rig Hopalong Cassidy would have been proud to strap on. WoW!!!!
AC
-
Beautiful sheath, Dave. I really like the quilt pattern. I've used it myself and it has a real quality look. The knife is also outstanding.
Another outstanding one, GB. The belt loop is unique. No question how that'll hang. Very nice.
Kid, that inlay work is really striking. Nice touch to put it in the initials, too. Fascinating work.
What kind of beer do you offer 'em, Dave? They ignore mine. Must not like micro brews. ;D
-
Wow Terry, Bling Bling Bling! That is a great looking rig!
-
Dave, GB, KT
Great work all of you.
WC
-
Howdy Dave,
Beautiful work! Your Knife's look like fine jewelry and the your Sheaths compliment them.
Howdy GB,
You have created a work of art for your Pard. He will be proud to wear it.
Howdy KT,
Your son will treasure this very fine looking rig. It sure is great to make leather that will stay in the family.
Many thanks to all of you gentlemen for sharing your talents and expertise with us.
-
Thanks to every one for the nice comments. KT
-
GB, wow where do you get these fantastic ideas? I guess I need to change the brand of beer I drink. What a beautiful knife sheath.
KT, You also what imagination. That inlay design is great and the whole rig is super well done.
Wiley :o
-
For the past three years I've been using a cross-draw setup with .38 special 1873 SAA pistols in a 7-1/2" barrel length. I've purchased a USFA and a Great Western II 1873 SAA's in .45 Colt in 5-1/2" barrel lengths. I want to switch over to a right hand/left hand strong side rig.
Here is the third try. These are Slim-Jim styles with the pouch dropped down 1" from the top of the belt loop and a 10 degree barrel forward cant. I tried them out and I'm getting closer. I don't like the way the pouch looks with the bottom sewn shut so it's back to the drawing board.
Attached is a picture of a Holster I made a while back. I'm going to try for more of this look on my next set. Good thing I'm not paying for the research & development costs on this project!
-
Johnny very nice work and I really like the Blk. one. U know me and spots. ;D KT
-
Johnny if you don't like the sewn through toe maybe try a toe plug, very authentic for the style.
Ned
Here's one I did for Rick some time back.
-
I wouldn't take a million dollars for it either ;) I hope to have grandkids someday..
-
Howdy Ned,
That's a great suggestion! Don't know why I never thought of a toe plug before. It would certainly look good and also help hold the shape. Thank you Sir.
-
Kind of a tedious job but the end result is worth the trip.
I don't do them often but once in a while a certain design just calls out for one.
Like this.
Ned
-
Howdy Ned,
That's a mighty fine looking rig. The pistol really looks right at home in there. Thanks for showing it to us.
-
Kind of a tedious job but the end result is worth the trip.
I don't do them often but once in a while a certain design just calls out for one.
Like this.
Ned
I agree Ned, the toe plugs really puts the period correctness into them too, once you've done a couple it really isn't that hard to do, and it does help keep the holster intact, especially if lighter leather is used, I personally don't care for them, I like a open end, so any junk can just fall out, but for wearing in snow or muddy parts of the country, it can be a life saver, by keeping the bore open and unplugged in case of a fall.
Johnny McCrae, beautiful holsters Pal, you're really knocking them out, that new work shop is paying dividends .
tEN wOLVES ;) :D ;D
-
Johnny and Ned , thats some nice work.Dave :)
-
I like "em" all :)
-
I like "em" all :)
+1 on what Rick said. And thank you all for the nice comments.
Wiley, it ain't the beer old friend its them dadblasted kerosene fumes from the heater in my shop ::) ;) ;D
-
Ned thats some pretty nice work there pard. KT
-
Finally got this rig finished. Second holster and belt. KT
-
Kid, you must punch holes in your sleep ;) Again you have built a rig that just calls to me. Simply stated, I love it. I have got a bunch of questions to ask about that rig.
I wish I still had that side of buffalo that I wasted on other things . The grain in it would have made a really pretty rig like that one. Maybe one of these days I will get my hands on another one. Great work Pard that is a beautiful rig.
-
That would make a great indian rig,it looks a patchy :D
-
Howdy KT,
You are the King of Versatility! Your range of different and unique looks, all well executed, are incredible! Please keep em' coming. They are a pleasure to view.
-
Very nice Kid, this must be the one you were talking about, it's a beauty, one thing is for sure, you really know how to think outside the box, and always tastefully, your limited use of spots is really right on for this rig, I know you were probably were biting your tongue and having convulsions with wanting to put more bling on this rig, but I think you made the right choice, it looks great pard. ::) :o 8)
tEN wOLVES ;) :D ;D
-
GCR great little pun. ;D ;D TW I still have the shakes but this is not the one with the distressed leather. Thats another one I,m working on KT
-
Johnny, I personally like the rounded closed toe on your holster. The toe plug would also look good, either way it's going to be a beauty.
Ned, very nicely done rig pard. One of these days I'm gonig to try that toe plug thing...maybe. I do think that toe plugs are done with smoke and mirrors.
KT, do you sleep now and then? Cowboy that is a master piece of a rig.
Wiley
-
GB- GCR - Johnny-TW Wiley Thanks KT
-
I think we should all put our name in a hat and have a monthly drawing,whoevers name gets drawn KT has to make them a holster.The name that gets drawn is tossed away,then ya pick another the next month ;D ;D He needs somethin to do dontcha think? ;)
-
GCR I like that idea and we,ii start with my name. ;) :D ;D KT
-
Monthly? I was thinking weekly.... Seriously, nice work KT.
DM
-
I'm good with that :)
-
Johnny, those holsters look good. You're going to have fun with the toe plugs, too. They really make a holster look good.
Ned, that is a fine example of one with the toe plug. Very nice work, there.
Nice finish-up on the rig, Kid. That looks goood.
-
Johnny and Ned, good work guys, even if it's back to the darwing board for johnny
KT, Gun Butcher isn't the only one wanting to know how you did that. You're going to have to talk about the belt on that rig. I like it but I'm sure criouis as to how you did that.
GB, I don't think the guy sleeps or eats, he just punches out leather 24/7 ;D
-
Dalton, Marshall, JD thanks. JD we will be talking. KT
-
Thanks for all the kind comments pards! ;D
That rig looks fairly simple but alot of planning went into it.
I designed and built it for Dennis Adler, Writer for Guns of the Old West Magazine and Author of several books. I believe Doug Turnbull built the conversion.
Imagine my surprise when the rig showed up in the magazine! ;D ;D
Ned
-
I just got the knife Dave made for my granddaughter in the Marines and it is a lot better than the picture shows it to be. Thanks Dave.. KT
-
JD,
The roses look great!
Boy Howdy, gone for a week and 8 pages of purties to look at! :o ;D
-
howdy pards
heres a look see at what GCR's luger holster is gonna look like but i made a boo boo on it
he wanted a left side right hand cross draw and me be left handed made it just the oppisite
LOL go figure but here is the basic lay out for ya Rick hope you like it
Cowboy316
-
WOW!
Rick's gonna be squirmin with delight over this.
Now Ricky, sit still or you're gonna have to go to your room!! :o :o ;D ;D ;D ;D
Ned
-
Howdy Cowboy 316,
It's always a pleasure to view your carving skills. GCR will be proud to wear this Holster. Thank you for sharing it with us
-
Beautiful work c316, Rick will be jumping up and down for sure
tEN wOLVES ;) :D ;D
-
C316, Well done my friend....
-
316, nicely done cowboy as always your carving is outstanding.
Wiley
-
HUH? what ,who, where,but huh? ??? Yea but,guess i better get that rifle sold...Crimeny that is so COOL!!! You bird dog~~~ :P
-
C316 beautiful job.. Work to be PROUD of. KT
-
316,
Gotta agree with the pards!! Your carving just gets better & better!! ;D
-
Howdy 316
Good lookin holster.
Can I ask why you made the belt loop so dark?
WC
-
thanks pards for all the kind words im greatful for all the help and support rom you guys
and im just doing what i love to do and thats work with my hands
WC i dont know why i really did it that way on he one just thought it might be a little different
but like i said this was a boo boo and am in the process of making the one that was suposed
to be made first i just had the template backwards lol
Cowboy316
-
you know pards its been bout a year noe since i hook up to your string and if you think back and look back at my work its strated out good but with me doing it every day now and im learning little tricks here and there and with your support i see my work getting better my self so i just wanna give everyone here a big hats off and thank you
Cowboy316
-
Had to look again.That carving is really lookin good.Can't believe you did that so fast.
-
Great looking work Cowboy
-
Good looking carving there Cowboy 316. Now you've got to get yourself a Maker's Stamp so you don't have to carve your name on the back like on a tree! I'm sure Rick will enjoy the holster, nice work. JD
-
Oh yea i will,we did a little copying too as you can see... ;)
-
I finished up this 1911 holster this morning. I made it to match, as closely as possible the SAA holster on the left. My friend Dawg Leg Don has a really fancy Buscadero rig, and he wanted a holster for his 1911 that he could use in place of the SAA holster.
Once again I learned a lot by making this rig, and I will do some things differently next time, but I’m fairly happy with how this one came out. I highly recommend Standard Rivet’s spot setters. They made setting this many spots a breeze. The back is attached to the holster body with 3 Chicago screws, so it can easily be swapped out for the other holster when needed
I had to come to the forum a couple of times to figure things out, so thanks to all of you helped out.
(http://i165.photobucket.com/albums/u51/HarleyPastor/Dawgprojectcrop1.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Dawgholstersfull.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Dawgholstersempty.jpg)
-
WELL DONE JD, I see you like the Standard Rivet Spot Setter, they're hard to beat, your placement of them is spot on, you did a great job on this he can wear this one with the same gun belt and look cool, it just looks super all around pard, Thanks for the look see ::)
tEN wOLVES ;) :D ;D
-
Dog gun JD you did yourself proud on this one . I LIKE . You really got the hang of it on this one. Great job. KT
-
Heres a picture of the knive sheath I made for the knive Dave Cole made for my granddaughter in the Marines. Shipping out tomorrow. KT
-
JD, that one came out Aces Bud. Very nice job. You got that one perfect.
Kid , thats a great looking sheath. She is going to be proud of that.
-
G'Day Parson,Terrific job on the holsters,they will go well with your bad guy black hat :P Feathers
-
JD! That turned out great!!! Good job and hold your head high!
KT, very nice sheath!
DM
-
Howdy JD,
You can be very proud of these Holsters. This is an all around great job. Thank you for sharing this with us.
Howdy KT,
Beautiful Sheath! That is a pretty nifty design coupled with your usual First Class workmanship. Many thanks for showing it to us.
-
That's a doozie of a knife sheat Kid Terico, that snake inlay looks great, your Daughter will love it, it has a classy look to it, and the contrasting color really brings out the inlay, Well done pard. ::)
tEN wOLVES ;) :D ;D
-
Howdy JD
Great job on the holster. I hate setting spots. :)
KT good lookin sheath.
WC
-
That really looks beautiful, Cowboy. The tooling is great and that color sets it off nicely.
Very nice job of making a matching holster, JD. Your work is getting very good.
Kid, the two tone leather looks really good with the snakeskin inset. Very nice work.
-
Thanks to everyone for the comments. KT
-
Thanks for the kind comments guys. Just to be clear I only made the 1911 holster. The SAA holster came from a well known maker; I was asked to try to make a 1911 holster to match it as close as possible. There is some stamping on the SAA holster we elected not to include on the 1911 version.
WC, I can see where a guy with as much experience as you could come to hate spot setting. I had a terrible time with it until I bought a couple of setters from Standard Rivet. I'll never use the Tandy spot setters again. Even Standard’s rivets are superior to Tandy’s. I need to buy a couple more setters, then I'll be set ::)
Kid Terico that is one fine looking sheath. Your granddaughter is going to have a great time showing that off to her Marine buddies. She will tell them with great pride that it was custom made for her by her granddad. I'm sure she will value that for the rest of her life.
If you get a chance, please tell her that you have some leather working friends that really appreciate her service to our country.
Thanks again guys, JD
-
JD, you did real good on that 1911 holster great leatherwork a very impresive duplication of the SAA holster. Very cool 8)!!
KT, very nicely done to say the least. Your grand daughter is going to be over joyed with the knife and sheath what a neat gift idea. ;D
Wiley
-
JD that turned out fantastic. You did a great job on design and your spot setting is right on. I guess I'll have to break down and buy one of those spot setters. Got to be easier than the way I do it.
AC
-
I don't recall what Tandy charges for a set of spot setters, but you have to buy them individually from Standard Rivet, and of course you need one for every size spot you're going to use. AT $18.00 a piece they aren’t' t cheap, but my experience with the Tandy setter and all the different methods I read about wasn’t working for me, so I bit the bullet. I’ve got to say it’s been one of the better tool purchases I’ve made
After a close review of this holster by someone I consider a friend and far better leather worker than I am, I’ve got a few more things to work on to get it just a little better looking. There are some things I can’t fix, like deeper stamping, but some things, like the edge of the welt I can and do plan to deal with before I deliver it on Saturday.
Thanks again for all the positive feedback, but I really appreciate the comments that help me improve!
-
It sure looked good from here JD, I know up close and personal can change the look abit, but your doing fine work.
Kid, ya did my knife proud pard,not that I would expect anything less from you.Just hope she loves it.Dave :)
-
Heres one I made out of distressed leather. No sealing or oiling or staining. It was fairly oily already. I didnt put much BLING on this one. :) :D ;D KT
-
Most excellant KT I love it.
Looks like it just travelled from south Texas to Dodge City!!
Ned
-
Thanks NED , thats the effect I was trying to get. KT
-
That's a dandy Terry, like the way it looks ol old and used like, well done.
tEN ;) :D ;D
-
Well if that's what you were after then you NAILED it in my book. I'd ride with anybody wearin' that rig.! ;D
It shows alot of experiance and more stories around the campfire than could ever be told!
Ned
-
Ned Thats why we will take TW with. he can spin a good yarn or two for us. ;) KT
-
Great look on that one Kid. I like it!!!
-
Howdy KT,
Very nice! That's my favorite style... "the old look". Thank you for showing it to us.
-
KT,
WOW!! Love it! Ya done real good!! ;D ;D ;D
-
KT, thats a little different from your norm, but it still has that classy KT touch.Dave ;D
-
Nicely done KT has a rode the river look to it.
Wiley
-
Another great rig Terry, but you ought to think about getting a hobby with all your spare time :P
Are they piling up on you yet?
JD
ps Thanks for the great advice over the phone, I'll send you a picture as soon as the dye is dry
-
I like to do some thing out in left field once in awhile. ;D ;D JD I ,ll try to work on it but most of all cant thank the lot of all you great leather makers enough for the nice words.KT
-
Kid, I really like the distressed leather on that. It has that time-made-comfortable feel. That's definitely is a fine look.
-
Marshal Thank you, I was afraid it might have a little to much Bling for you. ;D ;D ;D KT
-
LOL, Kid. ;D
-
Hey pards here is a 1911 holster and clip pouch. I made this for a young Texas lawman. The holster is lined with veg tan and polished and has a strong forward cant, very fast draw. The clip or magazine pouch depending on what you like to call it is a pattern from the July 2008 issue of The Leather Crafters & Saddlers Journal. The pattern was contributed by Dick Sherer of Dick Sherer Custom Saddles. I always like to give credit to whoseever stuff I use.
Wiley
-
Lawdsogs get everthang :( Fancy smancy there olebuddy..
-
Howdy Wiley,
Beautiful job! This matching set has a classic look to it. I really like the finish you put on it. That youngster will be very proud to wear this. Thank you for sharing it with us.
-
Howdy Willy
This 1911 holster and mag. case is beautiful, I really like the antique looking color, it's a good design, I'll bet the young pard you made it for really likes it, your carving looks top notch too, I like a high rise with a grip forward cant, they're very user friendly that way.
Thanks for the look see
tEN wOLVES
-
Wiley beautiful job all the way around. Nice carving and design. I might have to hire you so I can slow down. ;) KT
-
Wiley, you ole dog, still got a few tricks up yer sleeve don't ya. Beautiful job, I really like the color and the carving looks great. Anyone would be proud to own that rig.
-
Johnny, GCR, TW, KT, GB, thanks for the kind comments very much appreciated.
WD
-
Very good work Wiley! I like that pouch! Will need to look up that back issue.
DM
-
Howdy Wiley
That is a good lookin set.
WC
-
Whow looking at what some of thise guys are doing with leather just reminds me of how much of a ameture i am i thinkm your rigs are great and it gives me ideas of some stuff i can do because my carving is not that great yet. keep up the good work and post mor picts
missouri Half Breed .
ho yea love the indian beading.
-
Hey Wiley, most excellent job on the 1911 holster & mag holders. Everything about them is first rate. The color & finsih are good lookin. The mag pouch looks like two separate pouches joined together with the belt loop, but that's probably not the case. Did you wet mold the mag pouch? Thanks for sharing the pix, JD
-
DM,WC,Missouri,JD thanks for the kind remarks much appreciated. JD, the mag pouch is one pouch swen down the middle. If you make one of these becareful to get the middle swen up before you put the belt loop in place I made that mistake and had to take it apart...man I hate it when that happens. Probably the next one I do I will not use the rivets on the mag belt loop I will probably sew it, I don't think it needs that much support. JD I did wet mold the mag pouch.
Wiley
-
Thanks for the explaination and warning Willey, I appreciate it. JD
-
My latest 1911 holster KT
-
WOOOOZERS, that is a beautiful holster Terry, it looks like the loop snaps in the front, as always the inlay is icing on the cake, I guess I'll have to give this one the HUMDINGER award, well done Pard. ::) really nice design all around. :D
tEN wOLVES ;) :D ;D
-
Thanks TW nice to hear a compliment like that from a pro like you. Glad u like it. KT
-
Nice inlay work! The filigree showing up here is beautiful too. I haven't done any of that in years, may have to try it again. I just finished up this pair last week. Not real fancy.
Safe trails,
CKid
-
C Kid nice pair of holsters. KT
-
Wiley, you ole dog, still got a few tricks up yer sleeve don't ya.
Dogs got sleeves?
Right fine looking work, Wiley.
-
KT & CK
Good lookin holsters guys.
WC
-
Howdy Conelo Kid
Nice holsters, good design, and classy border tooling, I like the color, and different shades and tones, it makes them look very rich, Well done pard, it's good to have you back with us, we missed having you here.
tEN wOLVES
-
Howdy
Here is a sheath I did last night for a friends son. The knife is made from a leaf spring.
WC
-
Detail shot
WC
-
Finished.
WC
-
:D ;D :oDetail shot
WC
You know it's funny cause the first thing that came to my mind here is...."that's sick"...LOL that just ain't right!! The perfection of detail and timeing that went into this piece is... well, that's Darn good!! Thank you for sharing, WC :D ;) :P
-
Forty Rod thanks for the compliment pard. Ya know that's a good question hmmmm do dogs have sleeves? Heck I guess they might if they get all dressed up. :-\
KT, man you've got more imagination, and talent...very purdy holster. Try and get alittle rest now and then ol pard. You keep up this pace and we gonna run out of cows. :o
Howdy Conelo Kid, good lookin holster there cowboy.
Wiley ;D
-
I've got some leather tools for sale now, 'cause I think I'm gonna quit!!! ???
You guys are SOOOOOOOOOOOOOOOOOOO stinkin talented
Terry, that snap off strap is a great design and the inlay is outstanding
Canelo Kid, more great work there, I love the color
WC, I don't even know what to say, except to agree with Freedom regarding the precision and detail.
-
Gonna try and post a pik of my new Slim Jim,aka Jessie james rig
-
KT,CK,WC,WD,GB,NB,TW and the list goes on. You all are really raising the bar as to quality work. I only hope to achieve this level someday.
WC I have to say that sheath is as close to perfect as a human can get. Who makes that meander stamp? This forum and the Pards that post the fine quality work here make this hobby the greatest way to express yourself that I have ever been involved with. Keep up the great work.
AC
-
WC great job Pure talent. KT
-
Who makes that meander stamp?
AC
[/quote]
Howdy
That stamp was made by Robert Beard Pro-Series Tools.
WC
-
WC, your sheath in one word, " PERFECTION " I must have set here for ten minutes just staring at what you've done here with this sheath, you're unbelievable at what you can do with leather.......
tEN ;) ;D
Montana Slim, your holster came out great, nice color too.
tEN :D ;D
-
That's really nice, Wiley. Good job on the tooling and choice of color.
Another nice inlay, Kid. That snakeskin with the black is very striking. Looks good.
CK, that's a nice pair. The dark brown really makes them look right. Nice work.
That sheath really looks good, WC. I like the basketweave with the meander. It has a very celtic look. Fine stuff, there.
Slick, that holster is very nice. The dark shade really goes well with that design. Very nice.
Welcome to the forum, MHB. Looking forward to seeing some of your work.
-
KT,
Beautiful! Another excellent example of your versatility and design talent.
CT,
Great job! This Holster has a real classic look. I love the color and finish.
WC,
Wow! I did the same thing TW did... just stared at this fine example of perfection. The workmanship and design are awesome.
Montana,
Very nice! Another Holster with a real classic look coupled with a beautiful finish. Welcome back.
Many thanks to everyone for for showing your work and sharing your talents with us.
-
All right ,,all right,I guess I should have said under his hat ::) ::) ;D
KT, CT the rigs you guys built are at opposite ends of the design spectrum and I like them both. Great job, they are beautiful.
WC, you are just gettin spooky with your stamping. I have to agree with JD,except I love what I'm doing so much.So, I will keep on trying to get at least close to where you guys are with all the talent.
Montana, good looking slim jim. If you ain't careful yer gonna be right up there with the rest of this bunch. Great color.
-
WC, beautiful sheath wish I could get over to your shop for some lessons my friend.
Howdy Montana very nice lookin holster I like everything about it. Thanks for showing it.
Wiley ;D
-
Here is a little case that I made for my wife. She has been carrying her ID and some other things in a plastic foldup sleeve for many years and it finally bite the dust so I came up with this for her.
-
Very nice GB, making those swirls on the back must have been fun, your handy work is beautiful. I have an ID case my wife gave me, one that you can carry credit cards in the back too, and I use this more than I do my wallet, it is on the scale of your card case here, as I get older , I find less is more. :-\ ??? ::) anyway for me ;D
tEN wOLVES ;) :D ;D
-
GB very nice job. I like how compact it is. KT
-
GB
That is a good lookin I.D. Case.
WC
-
Thanks Pards, I tried to freehand the back but, I think I need some more practice ??? WC just makes things look to easy ;)
-
Howdy GB,
Very nice! I'm sure your wife gets a lot of compliments on her ID case. Thank you for sharing this with us.
-
Thanks Pards, I tried to freehand the back but, I think I need some more practice ??? WC just makes things look to easy ;)
GB
AL Gould, Chuck Smith, Jim Jackson, Chan Geer. They make it look easy. I have to work for it.
WC
-
GB, very good job on that ID case ol pard your wife will enjoy having it. I don't know where to buy that plastic window stuff for a case like that could you help an ol pard out and lead me in the right direction. ;) :) :D ;D
Wiley ;D
-
Wiley, I picked some up at office depot. They are full page size sleeves for documents. You should be able to get them there or at a hobby and craft store. Hope that will help. And thank you for the kind words.
Durn WC, if you ain't at the top then I ain't even found the bottom yet ;) ;D
-
Thank you for the info Gun Butcher right under my nose...office depot hmmmm who'da thunk it.
Wiley ::)
-
Great job GB, I will have to start using up some of my scraps and do some of thoes things, maybe a wallet, mine has about hade it.
AC :)
-
GB, good work man, keep on carving. I watched Chan Geer work and I watched WC do some swivel knife work. They BOTH make it look easy, I'm sure as a result of lots of hours of practice-work.
-
JD, you have just named the biggest hurdle in my life. I hate practicing no matter what it is. If I could get over that I might be able to do anything :-[ ::) ;D
AC, a wallet is on my list one of these days when its raining ;) ;D
Hey Wiley, they also have the folders with the clear plastic covers that are alittle heavier if thats what you are looking for.
-
A buddy of mine came over yesterday afternoon . He had just bought his wife her first revolver. It was a Uberti with the blued frame and Pearl grips. He wanted me to make a rig for her so this is what I came up with to donate to the cause. :) KT
-
Howdy KT.
Awesome!
-
Just amazing KT, what a artizen you are. I know she will ware it with pride, an original Terico........
AC
-
Thanks Johnny and AC. He wanted something fancy to go with the revolver. I just called him and told him it was done and could pick it up tomorrow and hes on his way now. ;D ;D ;D KT
-
You knocked another one out of the park there KT. This rig truly is everything you said it would be. Outstanding!
-
You guys are knocking them out of the park.Kid, love the stingray pard,beautiful.I dug out some python for ya and the studs we talked about,I send them whne you get out of the hospital if you want.Dave ;D
-
Very cool case, GB. Good looking tooling. Nice warm color. Your wife should like that one.
Very nice ray rig, KT. Your buddy is fortunate to know you. Nice work.
-
Marshall I think the reason he likes my rigs is because there free. ;D ;D KT
-
KT
Another great rig.
WC
-
Beautiful Kid
-
nice work up there!
Here's what I've been up to,
(http://gunleather.t35.com/holster22new.JPG)
(http://gunleather.t35.com/gunhol.JPG)
(http://gunleather.t35.com/MainGunbelt.JPG)
(http://gunleather.t35.com/shotsleve2.JPG)
(http://gunleather.t35.com/22large.JPG)
-
Howdy Farmer
I was wondering what happened to you, looks like you have been busy, I don't know what to say, except WOW, you have really been honing your craft, your holsters and belt are Awesome, the guns a dandy too, thanks for the look see, and it's good to have you back with us..
tEN wOLVES ;) :D ;D
Terry, beautiful work pard, as usual, you work always stands out, your friends wife should be happy as all get out.
tEN wOLVES ;)
-
Howdy Farmer
I was wondering what happened to you, looks like you have been busy, I don't know what to say, except WOW, you have really been honing your craft, your holsters and belt are Awesome, the guns a dandy too, thanks for the look see, and it's good to have you back with us..
tEN wOLVES ;) :D ;D
Terry, beautiful work pard, as usual, you work always stands out, your friends wife should be happy as all get out.
tEN wOLVES ;)
thanks!
yep been busy as heck,....I'd been lurking because I had forgot my login info ;D ;D
Good to see everybody's still around! I know it's late, but I hope everybody had some blessed holidays!
-
Farmer, I'm glad you found your way back, I went through this a few years ago when I was learning how to use this confuser, What I do now is keep a file of all my user names and pass words for all the different forums and web sites I frequent, it really helps a lot.
Thanks for the holiday wishes, I hope you had a good one too. Keep up the great work pard, nice to have you back.
tEN wOLVES ;) :D ;D
-
WC GB TW everybody Thanks. Farmer nice work. KT
-
Nice stock wrap,i need to get one for my 92. Nice work all around.. :) :)
-
Howdy Farmer
Good lookin work. Glad your back.
WC
-
Howdy, Farmer. Good to see you back. Nice work, there. The double loop one is particularly interesting. I like the concho on it, too. Thanks for the pics.
-
Nice leather and guns too Farmer, looks like hand stitching straight and true.
Thank Y'all for the compliments on my Slim holster,
Gonna try the pik thing again on my latest rig
-
STOP THAT! :o :'( :P :-*
-
Thanks guys! :)
-
Farmer, I really like that double loop rig. Good, old-fashioned styles still work best for my taste.
-
Nice leather and guns too Farmer, looks like hand stitching straight and true.
Thank Y'all for the compliments on my Slim holster,
Gonna try the pik thing again on my latest rig
sweeet! I'm diggin that buckle! ;)
-
Farmer, I really like that double loop rig. Good, old-fashioned styles still work best for my taste.
My personal rig is very similar,....I'm going to try a 3 loop rig,..but with the 10 oz leather,...the two loop is a pain trying to fold over and get thru the loops,..dunno how the 3 loop will work. I butchered a few pieces of leather before I finally got a 2 loop pattern I liked,...lol,..but I got it now.
-
Whoa! Howdy Farmer holy smoke that is a dandy of a rig really nice leatherwork all around on everything.
Montana what a beautiful rig.
Wiley ;D
-
OK KT you went and did it "off the chart" is where that rig went. :) ;) ;D :o ::) 8)
Wiley ;D
-
Thanks a HEAP Wiley. KT
-
Thanks Pards :D
I wanted an Eagle theme for the rig and those Morgan conchos match up fine with the real thing on the buckle.
I'm out of projects untill my leather gets off of the back order list.
Sure do like the leather thats posted here, mighty fine craftsman out there.
Thanks
MS
-
Montana Slick, nice rig, and beautiful design and execution, and I'm a push over for Strawberry Concho's
tEN wOLVES ;) :D ;D
-
MS
Very nice rig.
WC
-
;) Farmer, MS great lookin rigs. Farmer glad to have you back, I really like the butt cover. Keep up the great work and the pics especially the star burst on the bling, real classy.
AC
-
Ten Sleep, something about strawberries, kinda parcial to em me self.
I really like the butt cover Farmer, I need to make one for my SXS Stoeger with some padding.
I dunt do heavy loads but my shoulder bruises easly.
Any hints out there as to what kind of padding I shouild use. Also where to get a good pattern.
MS
-
Ten Sleep, something about strawberries, kinda parcial to em me self.
I really like the butt cover Farmer, I need to make one for my SXS Stoeger with some padding.
I dunt do heavy loads but my shoulder bruises easly.
Any hints out there as to what kind of padding I shouild use. Also where to get a good pattern.
MS
This is the second time I've been called Ten Sleep, guess I've been called worse, just want to know who this Ten Sleep pard is LOL ::) ;) :D ;D As for but pads, I like to use high density foam rubber, like what they use on flip flops, I have a long pull, so I usually cement two pieces together to get the length I need, stuffed inside the butt cover , you never know it's there.
Regards
tEN wOLVES ;) :D ;D
-
Montana Slick nice rig. Great work. Keep them comming. KT
-
Howdy Farmer & Montana Slick,
Great work you Gents have posted! Many thanks for sharing it with us.
-
Montana, Farmer, beautiful rigs Pards.
Montana, I made my own pattern for my butt cover and I use a closed-cell foam for padding. If I can find it I will psot the pattern.
-
Ten Sleep, something about strawberries, kinda parcial to em me self.
I really like the butt cover Farmer, I need to make one for my SXS Stoeger with some padding.
I dunt do heavy loads but my shoulder bruises easly.
Any hints out there as to what kind of padding I shouild use. Also where to get a good pattern.
MS
You shouldn't really need a pattern if you have the gun there, That particular one is on my 870. I just wrapped a piece of 5-6 oz around the stock,...and cut where it needed,......the cap on the end- I just wet a piece and laid it over the butt and started pushing and stretching and molding until It dired and took shape-then cut off the excess. The sewing to get the stitch inside is a major pain in the butt!!! ;D ....and ditto on the closed cell foam here too.
-
Howdy everyone,
Just trying to get caught up on all the great leather work that has been posted!! I sure missed seeing and doing leather work, but I havn't felt like even getting on and posting.
Wholy Smokes JD, Those are awesome!! There is no doubt in my mind that you have become a master leather smith!! TK, I like the looks of that distress leather, looks real period!!!! AWESOME WD, Your Wild bunch holster and mag pouch is Right On!!
TK, WOW!!!!!!!!!!!!! Your Wild Bunch Holster with the snake skin and all that GREAT STAMPING just takes my breath away! CK, That is a great pair of period holsters!!! WC, As allways that is a AWESOME sheath!! Montana, that is a great looking holster, I would have liked to seen a better pic, great Job!! GB, Very Cool looking Card case, nice carving!!
Farmer,WOW WOW!!!!!!! Super Job, nice use of the star filter in the pic, realy make that holster snap out!!!!!!!!!!
Montana, That Rig looks like it jumped out of Packing Iron, you are SMOKIN!!!!!
Later
ACE
-
Ace,
Great to see you on the board again!! ;D
-
Howdy, Ace. Happy to see you're back. How are you getting along?
-
Ace old buddy, its only bears that stay shut up all winter.Its about time you show your face ;D ;D OOO its KT not TK ;) KT
-
!!!!!!!! HEEEEY ACE !!!!!!!!!!!!!!! :) :) :)
-
This is the second time I've been called Ten Sleep, guess I've been called worse, just want to know who this Ten Sleep pard is LOL ::) ;) :D ;D As for but pads, I like to use high density foam rubber, like what they use on flip flops, I have a long pull, so I usually cement two pieces together to get the length I need, stuffed inside the butt cover , you never know it's there.
Regards
tEN wOLVES ;) :D ;D
:-[ What kin I say Ten Wolves, would just a plain sorry do?
Many call me Montana Slim, but I dunt mind, he gets called Montana Slick
He's my shootin Pard
Couldn't get the slim jim sized up right Ace, maybe this will work.
http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0147.jpg
Thanks Pards
MS
-
:-[ What kin I say Ten Wolves, would just a plain sorry do?
Many call me Montana Slim, but I dunt mind, he gets called Montana Slick
He's my shootin Pard
Couldn't get the slim jim sized up right Ace, maybe this will work.
http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0147.jpg
Thanks Pards
MS
Hell, boys, I've called both of you guys worse than that. Didn't get caught tho.....ah, CRAP! Me 'n' my big mouth.
Is it too late to apologize?
-
Hell, boys, I've called both of you guys worse than that. Didn't get caught tho.....ah, CRAP! Me 'n' my big mouth.
Is it too late to apologize?
Many of those old Westerns had a part in there where "Sorry is a Sign of Weakness"
Fill yer hand Forty Rod.
MS
ps, Kant ferget to mention leather or it aint a leather thread.
-
Montana Slick is right, lets try to keep it on topic pards, this is The Show Your Stuff thread.
and Forty Rod I heard that
tEN wOLVES
-
Yea by golly and show stuff made by Ned Buckshot ;D And don't forget Ned Buckshot! Cuase Ned Buckshot made this.Ain't it a bueaty???! And Ned Buckshot did it... :D (i got your back Ned-A-Roo ;)
[Dead links removed by moderator]
-
My first time designing a rig for a automatic
-
Slick, that rig looks really good. Those conchos suit it very well.
Rick, Ned sure did you well with that one. I love the wood in the handle. Outstanding, for sure.
My first time designing a rig for a automatic
I'd say you did that one very well. It looks like a decent design. Nice accents on it, too.
Good seeing you back in town, Ace. Hope things are doing well with you.
-
Howdy Gents
MHB, Welcome to the forum, you've made some nice gun leather there, thanks for the look see
tEN wOLVES
-
Howdy Rick, Ned done you GOOD!! That is a AWESOME boot knife!!!!!!!!!!
MH, Very nice design for your auto.
Later
ACE
-
That is a nice little holster,Missouri Half Breed :)
-
This will be the last one I will post for a little while unless I can take my leather with to the hospital and teach one of the nurses to make one. This one is also made with distressed leather. ;) :D ;D KT
-
Nice looking Kid, as always
tEN ;D
-
Looks great Kid, I like the design and I love that leather. Oh, and its got just enough Bling ;) ;D
I know you will be back soon ,they can,t keep you down for long. I will be waiting to hear from you. Ron
-
Heeey,that would be a great design fer a scabbard for my Golden Palimino 22 rifle... :) :)
Maybe you should make a bunch of nurse give away key fobs ;) OH Nuoise :-*
-
Tip #1,don't have them remove the cathider too soon ??? : :-X :-\ :-X :-[ :o
-
GCR like the way u think. ;) :D KT
-
Nurses, leather....could be a good combo ;D ;D ;D
-
NWG I was wondering when someone would catch that one. ;D ;D ;D KT
-
Kid,
Sounds like you are prepared! Must have been a boy scout! ::) :o ;)
-
Oh, thats nice MHB, very nice.
MS
-
KT, I like that distressed leather look sure looks like something a workin cowboy would have been wearin back in the 1870s ridin herd on long horns up from Texas to Kansas. YEEEEEEEEEEEHAAAAAAAA :) ;) :D ;D
Wiley ;D
-
KT, I think you've invented "soft bling". That's the best way to describe your latest. It's pleasing to the eye and the accents set it off nicely.
-
Howdy KT,
Another beautiful rig from your creative workshop! Many thanks for sharing this with us.
-
Marshall the one thing wrong with the distressed leather is you CAN not burnish the edges and u cant groove it for a sew line but it still looks ok. Everyone thanks for the nice words. KT
-
Where'd ya get them horsey heads? :-\
-
From his Godfather perhaps?
-
GCR they were the old brass door knockers. They were surrunded by large horse shoes and I cut them out and lightly heated them to form them to the holster. KT
-
Heres a pic of my first holster after I made it I took it on a long camping, and hunting trip. Yes I borrowed the idea from Bob Mernickle, three slots offer strongside and cross draw carry. I like it, and I feel good about making it myself. Hopefully Ill just get better. Also there is a picture of a bowie sheath I made (made the bowie too).......and a shell carrier
(http://i201.photobucket.com/albums/aa170/badasp/ruger1.jpg)
(http://i201.photobucket.com/albums/aa170/badasp/bowie.jpg)
(http://i201.photobucket.com/albums/aa170/badasp/DSC01825.jpg)
Marshal Cy Clone
-
MCC prudy darn good for starting out. Keep up the good work. KT
-
MCC, nice work pard, good design on all, those pancake holsters are nice to wear, and comfortable too, your knives and sheaths are beautiful, again good design, and that is a real good looking butt cover, Thanks for the look see, don't be a stranger, we're happy to have you join in with us.
tEN wOLVES ;) ;D
-
:-X 8)
-
Howdy MCC,
Welcome to the forum. You have made a great start! The CAS City Leather Shop is a tremendous source of information, help and encouragement. We look forward to seeing your future projects.
-
Howdy MCC
Really nice work.
WC
-
Horse knockers,who'ed a thought :-\
-
Nice stuff MCC
-
:-[ Ol big shot me, thought I had the bull by the tail,I goofed up.
Took in my gunbelt by a few inches, aint bragging ya know.
Too short by an inch on the center hole. ::)
Who uses the gel dyes? Any luck with it?
MS
-
That's some very nice work, Cy. The leatherwork is very good. The knifework is also fine. Thanks for sharing with us. Welcome to the forum. This is a good bunch to ride with. Looking forward to more of your stuff.
-
Cy, that is some good looking knife work and the leather work is even better. Good to have you with us.
Gun Butcher
-
Marshal was Sky King one of your heros to??
MHB
-
:-[ Ol big shot me, thought I had the bull by the tail,I goofed up.
Took in my gunbelt by a few inches, aint bragging ya know.
Too short by an inch on the center hole. ::)
Who uses the gel dyes? Any luck with it?
MS
Do you mean the Gel Antique Stain from Tandy? It is ok but I like the liquid antique stain from Fiebings better.
WC
-
Do you mean the Gel Antique Stain from Tandy? It is ok but I like the liquid antique stain from Fiebings better.
WC
WC, I've used Fiebings however it's the fumes I'm bothered with.
Right now I'm using Eco-Flo from Tandy and it works okay but kind of messy.
All caught up on my projects, now for something to do. :)
-
Howdy MS
I know the fiebings Dyes have an odor but the liquid antique stains don't seem to,they are water based.
WC
-
Thanks WC, I'll check up on it, I think my sidekick Jerry uses it in his shop.
Here's a link:
http://www.westliveson.com/artists/croft/croft.html
-
Howdy MCC, that is some mighty nice leather work and the knife is real good also. Like the others have said welcome to the Leather forum. This is a real friendly bunch here drag up a chair by the fire how bout some hot coffee?
Wiley ;D
-
Hi Cy ,nice work and welcome.Dave ;D
-
Howdy cowboys, this spur strap shape was inspired by a boot picture in the Cowboy Chornicle, I'll let you figure out which one. Because I don't want to insult anyone..."what the heck is that does he really think that looks anything like our spur strap" ::) ::) ::). Hope ya like it.
Wiley ;D
-
Pretty snazzy there Willy, thanks for preview pard. ::)
tEN wOLVES :D ;D
-
Howdy Wiley,
Nice work! I like the look. Thank you for sharing this with us.
-
Howdy Wiley
Them's some snazzy straps pard.
WC
-
TW, Johnny, WC, thanks for the kind remarks pards much appreciated.
Wiley
-
Howdy Wiley, those are some mighty fine spur straps ya built! They look great, JD
-
Great looking straps Wiley. You might want to switch boots to keep the buckles away from rubbing on the horse. Just my 2 cents, and I may be wrong, but I remember reading that somewhere.
Great job
AC
-
+1 on the spur straps! ;D
-
Wiley, them are some mighty fine looking straps Pard. I like the color.
Heres what I been doing all weekend..Another file knife and sheath. Ned suggested the mexican loop sheath and I think it looks just right with this style of knife.
-
JD, AC, Gun Butcher, Dr. Bob thanks for the kind remarks pards much appreciated.
Gun Butcher, that is a beauty of a knife cowboy and the sheath is prefect for the knife you did real good.
Wiley
-
hey GB
thats amighty fine knife there pard that would look awful nice hangin next to the other one i got from ya LOL
keep up the good work
Cowboy316
-
GB that's a great looking sheath. I especially like the meander stamp, which I've not spent enough time on to make look decent at all. Nice job.
-
Very nice straps, Wiley. Those are a good look. Thanks for the pics.
GB, I also like the meander on that sheath. Both the knife and sheath are great. Good work. A file never had it better.
-
Howdy Gun Butcher
I agree with Ned, you couldn't have picked a better style for this type knife, it compliments it real well, and the clean lines along with the use of your meander gives it a classy look, the way you put the lines on the keeper strap/loop,and the two spots, is simple but elegant, I'd say you spent your day well pard. ::) :D ;D
tEN wOLVES ;) :D ;D
-
Thankee kindly Wiley and Cowboy.
Cowboy, I think I finally made one that suits me. Reckon thatun you got will remain and only child for awhile ;) ;D
Thanks, JD. I just got that stamp so I had to giver a try. I kinda like it but I think it would go better on a little larger format.
Marshall,I appreciate it. The only thing that file could ask for is someone who really knows what they are doing ::) ;) ;D
Kind words TW, any day in the shop can only be beat by a day on the range ;)
-
Nice straps, I like the color, it's my favorite. ;D
-
Howdy GB
That is one fine lookin knife and sheath. Good job on the Meander.
WC
-
Thanks WC
-
Howdy GB,
Beautiful job on the Knife and Sheath! The Sheath really compliments the Knife. Your Meander stamping is excellent. Thank you for sharing this with us.
-
Marshal and Montana, thanks for the kind remarks on the spur straps very much appreciated.
Wiley
-
Great work there Wiley. Great job on the knife and sheath GB.Dave :)
-
Thanks Dave much appreciated.
Wiley ;D
-
Wiley and GB nice leather work. Nothing I like better than good work made by your friends when your on the mend. Thanks KT :)
-
Wiley is one of the best of the best, keep up the good work Pard. :)
-
Hey Wes, here's some more pics of the B wester rig, (Black Canyon pattern by Will G), they are still with cell camera but closer up.
My son got to pick the color scheme, conchos, and he really likes the horsehari tassels on the holsters!
He also did all the basketweave stamping on the rig
This is the ony project other than a wallet that I have laced, and man did it take alot of lace!
He has worn this rig to quite a few cowboy shoots and it works well for him and is holding up well.
Now if dad would quit procrastinating and get the real leg straps made instead of the "temporary" lace leg ties that
have been on there for over a year. ::)
-
Larrupin, that's some very nice work. Your floral tooling is outstanding. Be sure to post a picture of that Dodge City holster when it's finished. Nice work. Looking forward to more of your stuff.
-
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0570.jpg)
I hope this works.
I'm new to this forum, so I hope y'all don't mind if I post some pics. of my leather.
This is a new rig I'm workin' on.
~EE Taft~
-
Wow, I'm gonna have to work on thumbnailing my pics.
That big pic. shows off my flattering mistakes. ;D
~EE Taft~
-
Howdy EE,
Welcome to the Leather shop. Well I'll tell ya... That is some pretty nice work. I sure don't see any mistakes. Look forward to seeing more of your work.
-
EET tHATS SOME DARN NICE WORK YOU DID, LIKE THE DESIGN kEEP THEM COMMING. KT
-
Thank ya fellers.
I'm kinda like my old man when it comes to things like this.
I could find mistakes in my own work that most can't see............
Guess I'm kinda hard on myself. ::)
~EE Taft~
-
EE, Welcome to the forum pard, your holster looks great, nice use of your border tools and the seeder stamp, your spot placement is right on, well done for sure, we look forward to seeing more of your work in the future.
Regards
tEN wOLVES ;) :D ;D
-
I'll be sure and post pics when I get that rig completed.
I'll have double strong side holsters, belt, knife sheath, and matching cuffs and spur straps.
~EE Taft~
-
Nice work!!
I think all of us leather workers (is it work?) feel the same way as you do, and see our own mistakes more than the other guy. I think its part of the craft.
DM
-
Well, as I said before.. For most of y'all, it's ART, for me it's work!
I gotta work hard to be half as talented as some of you guys. Man, some of the stuff on here is just amazing!!
I'd be proud to be part of the ranks.
~EE Taft~
-
Nice work EE and welcome to the gang.Dave ;D
-
Howdy EE
That is one mighty fine lookin holster.
WC
-
Thanks fellers!
If y'all are like me, ya strive to do better with every project ya do.
I love doing this stuff, it is calming and very enjoyable.
Been doing leather work for several years now and still enjoy it as when I first started.
~EE Taft~
-
EE,
That is one mighty fine looking holster! I'm not much into bling, but I could see myself wearing that rig!! :o Gotta go wipe the drool off my new shirt! :P ;) ;D
-
Dr. Bob,
I kinda feel the same way. I don't like too much bling, but this is more suited to me for a fancy rig.
Anything more and I'da probably found a new home for it. ;)
But I like.......I think I'll keep.
Thanks for the compliment Pard.
~EE Taft~
-
Chill out EE, yer as bad as I am looking for mistakes that no one else kin find.
Only the maker knows fer sure.
I like that holster, looks like hand stitching to me.
How did ya get such a nice big picture? I've tried the recomened 400x246 pix..96 dpi and it comes out small.
I like to see detailed piks so I kin ooooh and awwww, like yer Holster. :)
M.Slick
-
Nice rig Larrupin, I kin see this was well planned out, nice work.
Thinking of a B-Western for myself, I have the pattern but when it comes to working on my projects, I do it my way.
Ferget the pattern eh. I just wanted to see what it looks like. ;D
MS
-
EE, that's a very nice looking holster. Mistakes? None I can see. It'll be nice to see the completed rig. Glad to see your work. Looking forward to seeing more of it. Welcome to the forum.
-
Chill out EE, yer as bad as I am looking for mistakes that no one else kin find.
Only the maker knows fer sure.
I like that holster, looks like hand stitching to me.
How did ya get such a nice big picture? I've tried the recomened 400x246 pix..96 dpi and it comes out small.
I like to see detailed piks so I kin ooooh and awwww, like yer Holster. :)
M.Slick
I Just posted what I had on photobucket directly to this forum. Not real sure what it takes to do one that big other that what I did.
Yup, Hand stitched. I don't own a sewing machine. Would like to get one sometime though, for bigger jobs ya know.
~EE Taft~
-
EE, that's a very nice looking holster. Mistakes? None I can see. It'll be nice to see the completed rig. Glad to see your work. Looking forward to seeing more of it. Welcome to the forum.
I will try both here and on the wire to document my build as I finish the different parts and post a pic. of all when I'm done.
It may take a while as I have other jobs that I'm doing. I'm just workin' on my rig around the others.
I thought that might be an interesting way of doing it.
Thank all for the compliments. Mama Taft (the wife) said fer y'all to quit bein' so nice or my head won't fit through the door.
;D
~EE Taft~
-
ok pards
heres a blocky little holster i did for my dads new taurus pt 111 9mm
that is definitally a hard pistol to design for LOL
Cowboy316
-
EE Great lookin rig, like the bling. Now lets get to the buckle behind it. WoW!!!! Thats a biggin. Really like that
AC
-
Sorry Pard, That's not a buckle.
I had another Pard that I sent it to on an email that asked me the same thing.
It's a picture frame. I thought it would be a nice looking way to prop it up for the pic.
I'm gonna have everyone askin' where to get a big buckle like that now. ;D
~EE Taft~
-
Thought I was in Heaven.... Oh Well, maybe there is one out there............
AC
-
CB, looks good. Actually that Taurus isnt much different than a Glock for fitting purposes.On a Glock holster though you should definately cover the trigger as there is no safety.Dave :)
Here's a design I use on the Glocks( the two on the left) and the one on the right is for a 1911.Inlays are shark, and alligator for the Glocks and Stingray for the 1911.
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/holsters-1.jpg)
-
CB, looks good. Actually that Taurus isnt much different than a Glock for fitting purposes.On a Glock holster though you should definately cover the trigger as there is no safety.Dave :)
Here's a design I use on the Glocks( the two on the left) and the one on the right is for a 1911.Inlays are shark, and alligator for the Glocks and Stingray for the 1911.
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/holsters-1.jpg)
I like the fish and alligator skins. I've been wantin' to try some snake skin inlays but havn't gotten around to it yet.
Very nice!! ;D
~EE Taft~
-
This is a rattlesnake sheath I made for a knife I own.
-
These are three rigs I finished about a week ago.
-
This is my rig from last year. It's a little dirty and roughed up but it passes (I guess ;D)
It's a little simpler design and not quite as flashy.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0319.jpg)
-
These are three rigs I finished about a week ago.
That's some good lookin' stuff, pard.
~EE Taft~
-
Man, a guy sure has to stay on his toes around here, with all the fine leatherwork coming down the pike or he's likely to miss it.
EE Taft, those are some real fine looking holsters and belts I can't say which I'm more partial too, 'cause they all look good. The black one is a real killer for quality.
Cowboy 316, I use to own a gun just like that; it was a stubby little due. You've done a real nice job on that one.
Mr. Dave Cole, could you possibly show a picture of the backsides of those holsters? I sure would like to see how you make'm to hand on belts!!
Ibaize3, you've done some right nice work yourself. I like the looks of all of it.
I've got to shake a leg here'n get somthin done!
-
Those are some great lookin holster guys. If I could find some Oklahoma State Cowboy conchos Mr Taft :o I will need some close up pictures of your rig. The KT sent me a picture of a rig he built in orange & black.. I have to make one in orange & black with Oklahoma State Cowboy Pistol Petes on them. Go pokes. 8) Sorry lost my head. :P
Rev
-
JD said it right, if you're away for a few minutes things can start popping around here, Ibraize your holsters look great, nice use of the basket weave, and that rattle snake skin inlay knife sheath is cool, thanks for the look see, and Welcome to the forum.
tEN wOLVES ;) :D ;D
EE Taft, your handy work is very well done pard, the double stitching is an extra nice touch, and your two tone look is also nice, you've been at this leather stuff for a while, I mean this isn't your first rodeo, so to speak, we're looking forward to seeing more from you, thanks for the look see. ::) :o 8) ;D
tEN wOLVES ;) :D ;D
-
JD, my most popular attachment for new guns is a snap-on.Dave :)
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/sharkskinholster2.jpg)
-
First Montana and KT thanks for the kind remarks much appreciated.
Whoa!! who called this rodeo? goodness what fine leatherwork!! Let me see... Howdy EE Taft welcome to the leather forum. Mighty nice leatherwork there cowboy like TW said this isn't your first rodeo.
316, pard I like that holster very well done. Those little square guns are kinda hard to build a holster for aren't they? Oh, and congratulations on that gun store gig...sweet!!
Dave, what can I say pard, beautiful leatherwork, I certainly agree with what you said about Glock holsters, cover the triger. I've got a little inside the pants conceal carry holster I made for my Glock model 27 I have used for several years I am going to post it nothing fancy but it works real good.
Howdy Ibaize3, nice sheath man that rattlesnake stuff scares me but it sure is purdy. Those holsters are real good pard. All of your leatherwork is really well done.
Hope I didn't leave anyone out. WOW, this site is smokin with leatherwork!!!
Wiley :) ;) :D ;D
-
Nope, ain't my first rodeo all.
Thanks all for the kind words and thanks Cowboy 316, Dave, and Ibaize3 for posting in with their beautiful leather art. Some folks 'round my part say "how much do you think the demand is for leather?"
I just tell 'em that I've found the demand from the greatest bunch of Pards in the world.
I've heard the art of leather crafting is dying out, well I'm here ta tell ya, IT AIN'T!
A little surprize for those that don't already know, I'm only 29 years old and have been doing this for about 18 years.
I wouldn't do it if I didn't LOVE it.
Hey Reverend, Did you say you needed more pics. of something I posted? I'd be happy to help ya out.
Here is a closer shot of the two tone, mind you it has seen a year's rough use.
Not a real flattering pic. of that one but it gets you closer to see what it consists of.
It's a pretty simple design as far as the tooling and cut goes, but it's a fast rig.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0323.jpg)
-
EE Taft
very sweet work pard and as for leather dying out it will never die if us young pups keep it alive and helpteach other the art
oh and did I mention im 37 and been doing this fine craft off and on for 20 + years LOL
Cowboy316
-
JD, my most popular attachment for new guns is a snap-on.Dave :)
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/sharkskinholster2.jpg)
Very nice!! Keeps you from having to take the belt off to get the holster off.
As I said, Very nice
~EE Taft~
-
EE Taft
very sweet work pard and as for leather dying out it will never die if us young pups keep it alive and helpteach other the art
oh and did I mention im 37 and been doing this fine craft off and on for 20 + years LOL
Cowboy316
Egg~zac~lee!!
It's nice to be able to talk back and forth like we do now. And nice to be able help each other out when we can.
Keep the fire burnin' Pard
~EE Taft~
-
No cabin fever on this forum, it's all about the hobbies we enjoy, how kin one be stressed out while having so much fun..
Keep em posted Pards, we like piks.
(http://i120.photobucket.com/albums/o187/JakeHarlow/650_birdshead_deadwood_leat.jpg)
-
MS nice holster, great color. Keep tkem commig. KT
-
No cabin fever on this forum, it's all about the hobbies we enjoy, how kin one be stressed out while having so much fun..
Keep em posted Pards, we like piks.
(http://i120.photobucket.com/albums/o187/JakeHarlow/650_birdshead_deadwood_leat.jpg)
I like that design on that belt. Slick little holster ta boot!!
Keep it up fellers, I'm gonna try to get more up in the next day or two.
-
Thanks KT, it's my first MT. Slim, not named after the MT Slim.
I like to give my leather names, makes em feel special. No Makers Mark either.
Here's my Sunset holsters, should have kept em.
(http://i120.photobucket.com/albums/o187/JakeHarlow/TBholsters.jpg)
-
Thanks EET, I like the Celtic designs, being a Scotsman, well what kin I say. ;D
-
Thanks KT, it's my first MT. Slim, not named after the MT Slim.
I like to give my leather names, makes em feel special. No Makers Mark either.
Here's my Sunset holsters, should have kept em.
(http://i120.photobucket.com/albums/o187/JakeHarlow/TBholsters.jpg)
Nice lookin' pair there MS
~EE Taft~
-
Thanks EET, it has a ranger belt to match and a knife sheath. Sent it to Florida fer my Sidekick, he needed a rig.
Recon I'll just have to make another on eh. :)
-
That's the way I do it.......... That way I always have an excuse to make another rig.
;D
~EE Taft~
-
EET, yer right, another one fer sure.
Just got the backorder in for my leather, took 3 weeks as I recall.
Toook and spruced up my blackbeauty, it's 5 yrs. old and all ready for the summer shoots.
In case ya aint seen her here a pik
(http://i120.photobucket.com/albums/o187/JakeHarlow/Blackbeauty.jpg)
-
Back order whew!! You must be way out in the wilds.
I get my leather orders in next day, and that's regular shipping.
Good lookin' set up there Pard. Makes me wish I had my rig done, but then I'da missed the fun of makin' it.
~EE Taft~
-
You Pards are sure puttin out some good lookin leather.
WC
-
Yeah, The only problem is I ran outta stuff to post so I gotta get to work on some more.
If my old computer hadn't crashed I'd have alot more pics. to post.
Sure is alot of nice stuff poppin' up, ain't there!
~EE Taft~ ;D
-
Wow, I'm gone for one day and youall let these younguns just run wild. That is some mighty fine leatherwork by all of you. Its good to have you young guns showing your stuff.
Keeps us old farts on our toes ;) ;D
-
Man, a guy sure has to stay on his toes around here, with all the fine leatherwork coming down the pike or he's likely to miss it.
JD hit the nail on the head here!
Howdy CW316, Dave Cole, Iblaze3, EE Taft, Montana Slick,
Wow! You Gents have all posted some great examples of creativity and quality in Leather Working. The Pard's on this forum have said it all. I just want to say thank you for sharing and keep em' coming.
-
Wow, I'm gone for one day and youall let these younguns just run wild. That is some mighty fine leatherwork by all of you. Its good to have you young guns showing your stuff.
Keeps us old farts on our toes ;) ;D
Yup, it's funny how the world can go astray when ya stop to take a breather. ;D
Thanks for the welcome pard. I'm gonna try to get some more stuff lined up to post in the next couple of days.
I just wonder why I didn't get on here sooner. I been on the Wire for 2 or 3 years now.
Just weren't on the ball I guess.
~EE Taft~ 8)
-
JD hit the nail on the head here!
Howdy CW316, Dave Cole, Iblaze3, EE Taft, Montana Slick,
Wow! You Gents have all posted some great examples of creativity and quality in Leather Working. The Pard's on this forum have said it all. I just want to say thank you for sharing and keep em' coming.
Howdy JM, Thanks for the welcome.
-
Larrupin, those are all very fine rigs. +1 on everything the other pards said.
I can see that your son would be very proud of that rig of his. That is some beautiful work
-
EE Taft, I'm lookin at that brown holster you posted, trying to figure out how it's attached to the belt! I think it's really great that you are as young as you are and have been doing this as long as you have. I'm gonna turn 61 in a couple of months, and I'm not quite 2 years into this stuff, with a whole lot to learn, so I ask a lot of questions!
That brown and black dye job is really sharp! The stamping is real good looking too.
Thanks a lot, JD
-
Holy Cow, is that a lot of lacing or what? You did an excellent job on that rig. I've got that pattern but have not felt brave enough to try it yet. Thanks for sharing the pics, JD
-
Montana Slick is that a Thunder i see ?? i just love that gun i have one with the 3 1/2 barrell 357 cal and i use it for my c&c carry that dud everywhere. im trying to make a Sholder holster one strap like the one cimmiron calls the doc but takes time and getting the botom u bult into thr holster ant as easy as it looks any suggestions. how bout you EET or ten wovles how do you get the right angle on the bottom of the sholder strap if im not explaing it right go to the cimmiron site pull up the doc thunder combo and you will see what im talking about the holster and the bottom u are all part of the holster pattern i have a pattern for around the chest rig but i just love the doc.Mt that rig you got your thunder in is real slick no pun intended(ha) and EET your work is what im striving to be able to produce you can teach an old dog new tricks it just takes longer and im short on patience i want to be able to do it NOW but i only been doing lether work for 2 to 3 months so life gos on the guys on this fourm are the best as far as moral suport they cant be beat. i tryied to two tone one last night and about 3am i got disgusted an did it all in chocolate.
MHB.
-
MHB, Thanks for the comp.
Yup it's a Thunder and a fine shooting one at that, but I keep it super clean. ;D
I make 5 1/2 " holster for my not too 5" irons, keeps the end of the barrels out of harms way
EET, I got in on the tail end of the year end sale on the leather, gone but for 1/2 price I kin wait it out.
I like to hand pick out my leather, like ya say, picky, picky, well I need to chill out too, I'm trying.
I must be in dyer need of some projects, so I cleaned up my last place on the bottom scores boots, all oiled up and ready fer some action here soon.
MS
-
I aint done lacing like that in ages, like 50 yrs. ago. How bout a refresher course Pard.
-
You pards are looking good this morning, and the picture taking has improved a lot, nice work all around, keep them coming.
Regards
tEN wOLVES ;D
-
Better piks, I got the idea from EET, works fer me as I aint no puter geek.
But I'm learning, fer an old MT. cowboy I kin stiil watch the rodeos ;D
-
EE Taft, I'm lookin at that brown holster you posted, trying to figure out how it's attached to the belt! I think it's really great that you are as young as you are and have been doing this as long as you have. I'm gonna turn 61 in a couple of months, and I'm not quite 2 years into this stuff, with a whole lot to learn, so I ask a lot of questions!
That brown and black dye job is really sharp! The stamping is real good looking too.
Thanks a lot, JD
It's just a really thin skirt. I've got a meeting to go to today and when I get back I get a pic of it for ya. ;)
~EE Taft~
-
WOW! 500 pages of beautiful leather!
-
Well all u gents are sure making some nice leather. It seems I cant even have a operation. I wont get time see all the great postings and I dont want miss aything.Keep them commig. KT
-
Kid, just get done what needs to be done and get healed up.
The piks will always be here for you, even if we Have to E-mule ys Pard.
-
This is a guitar strap I made for a member of our church worship team, Heather, who loves it. She requested roses, since her middle name is Rose. I want to thank WC, who took this strap and added color and a finish to it. My wife took the picture by the way ;D
(http://i165.photobucket.com/albums/u51/HarleyPastor/HeathersStrap.jpg)
-
Howdy JD, WC showed this to me when I stopped in, you did a nice job pard, and with WC's special touch it looks great, you can see how happy Rose is, you did good pard, it feels good when you can bring happiness to some one like this.
tEN wOLVES ;D
-
Amen,
MS
-
Nice strap...Reckon we outta hear some pickin,ya spose? ;)
-
JD
Her smile just made my day.
WC
-
JD great job. She should be very happy with it.Your gettingit down pat. :) ;) :D KT
-
Howdy JD,
Beautiful work! A genuine pleasure to look at! Many thanks for sharing.
-
Hey JD, That's a beautiful guitar strap. I been needin' to make one for myself and havn't gotten around to it yet.
And JD, sorry I ain't got back with you til now on the skirt on that holster. I got plum tuckered out last night and went to bed at 8;30. First time in months I went to bed before midnight. guess I was just worn out. ;D
The first pic. is the two tone. It is a pretty simple design, almost too simple as it doesn't have a tension screw.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0573.jpg)
This is some detail on the black one that I did. I like the design on this one a bit better as it has the tension scwew and a screw at the bottom of the skirt. Have a look........
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0574.jpg)
A shot from the edge....
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0575.jpg)
As you can see, The black one is for a short barrel pistol.
Hope these are helpful to any one interested.
~EE Taft~
-
Thanks guys, I appreciate the kind words. WC, she is really stoked about it; she did not stop smiling the whole time we were rehearsing. Chris (my wife) took several pictures with the strap in use, but they did not come out as good as this one did. She does not realize what it would have looked like if I had done the color instead of you, but I do ;D She does know you did it though.
Her appreciation makes all the frustration of trying to carve a rose go away. It's great to make something for someone who appreciates it so much. The challenge now is the other half dozen giuitar players will want straps too :o
-
Thanks for those pictures EE Taft. Are you embedding Chicago screws between the leather layers, or are you using something like T nuts?
Though I appreciate the views of that black holster, the one I had questions about is your Birdseye holster shown below. I saw that piece behind the grip, and I was curious as to what’s going on there. I realize now looking at it again it's the belt billet I see back there. So I assume you have a keeper sewn or riveted on the back of the holster, sort of like a Slim Jim. I especially like the color. Very nice work. Thanks, JD
(http://i165.photobucket.com/albums/u51/HarleyPastor/BirdsheadEETaft.jpg)
-
Sorry Pard, but I can't take credit for that one. That beauty belongs to Montana Slick
I would assume though that he uses a loop sewn to the back of it simalar to the loops I use on my Slim Jim holster design.
That's probably gonna be my next build after I get my rig done. I'll be sure and post pics when I do.
BTW, MS that's a beauty of a holster!!
The backs of my holsters are chicago screws embedded in between the face leather and the lining leather.
It's an easy process, just remember to install them before you line. As funny as that sounds, I still do that from time to time and have to correct it.
That only happens on those late nights when I should be asleep instead of setting at my leather bench. ;D
~EE Taft~
-
JD, WC, that smile really is a fine reward for the work done.
That strap must make her thirsty, though. ;D
-
I agree, Slick's holster is a good one.
EE, thanks for the pics of the back of those holsters, especially the black one.
-
Don't mention it Sir.
I like the ones with the tension screw for the belt, as it helps keep it in one place instead of riding around the belt as you move and run.
It's even a simple design. Just make sure you follow the proper steps while building it. Not that I've ever been accused of having the proper steps. ;D
Anything I can do to help out.
~EE Taft~
-
Marshall, she just happened to be handing out water to the various members of the worship team (We're a thirsty bunch!) Well hydrated people sing better. We usually have 10 people or so doing music every Sunday morning.
EE Taft, my mistake, and I'm sure Montana Slick will weigh in on this at some point :P
-
JD, that whats so nice about this thread.
Fellowship,craftsmanship, new ideas, nice leather and cabin fever is never a problem. :)
MS
Da Law
-
Nice job, JD.
-
Here is the back of the slim Jim ya saw a few posts ago, will take car of the ??'s
Lets see if I kin get the pik to work here.
(http://i120.photobucket.com/albums/o187/JakeHarlow/crossdraw2.jpg)
Sized for a 2 1/2 belt.
MS
-
Santee, thanks very much.
MS, thanks a bunch for the backside shot of the Birdseye holster. It looks real good, but it looks like you could use a larger belt that 2 1/2, but not seeing it in person it's difficult to say for sure (and you of all people would know for sure!)
-
JD,
Yer right, I stitched this one for a 2 1/2 " belt or, you can make it for up to 3" or more.
I like the 2 1/2" as it is more comfortable for bending over and great for back support.
The belts I've made for my Sidekicks say that the back problem has gone.
Pictured on the right is the BH right hand crossdraw and the left holster is for a Schofield, that I made for my Frin up in Calgary Alberta.
He calls it the Josey Wales rig.
(http://i120.photobucket.com/albums/o187/JakeHarlow/Tetonsrig2.jpg)
Slick
-
Slick, thanks for posting those pictures. As I've said, I sure do like the color you get on your rigs.
-
Slick great job keep them comming. :) KT
-
Great looking rig there MS. ;D
This is Kid Terrico's new pushdagger.It has a 1095 blade, Premium Desert ironwood and ivory.I also made the mosaic pin.The sheath has a Prarie Rattler inlay and two color Basketweave lacing.I have one more trick to add to the sheath, but I'll post that later.Dave ;D
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/daggerandsheath1.jpg)
(http://i43.photobucket.com/albums/e359/DCK954/KNIVES/daggerandsheath2.jpg)
I tried to do my version of one on saw on Flayderman's site of an 1860"s Gambler's pushdagger
-
Ooh! EE Like!!!!!!
:o
I might have to give you a call Dave.
-
Thanks Pards for the compliments,
Dave that is awsome, iron wood is a tough, hard as, well, maybe thats why they call it iron wood eh.
I have a buffalo carved out of it, had it for years, got it over here in Montana.
More piks Artists,
MS
T
JD, I use the Eco-flo Timber Brown dye applied with a dauber for the effects I get. Thanks
MS
-
Dave like other knife makers on this site are true artists. Dave will give you a real custom item if asked for. I am very pleased with this knife and sheath. It Looks good in my collection. One more pict. Thanks Dave.. ;) KT
-
Montana Slick, that is a beautiful rig pard, I like Slim Jim's anyway, and the belt ties both holster together for a great look.
Thanks for the look see, I bet you're enjoying that new shop.
tEN wOLVES ;D
Dave Cole, the knife and sheath are real cool pard, nice job all around, I know the Kid will treasure it.
tEN wOLVES :D
-
Slick that last rig you posted is a good'n pard. I like the color also and thanks for telling us what you use.
Dave, that is really pretty. Love the scales and the sheath is great. Kid is a lucky man.
-
Thanks TW,
The new shop is the first time ever organized play area. The reloading equipment is all boxed up and the leather is in.
Thinkin' bout making a slim jim holster rig like the one in the pik I made for my Sidekick Longfellow.
He's the krazy Canadian who likes to rubb elbows with the Open Range Gang.
He sent me a 100% beaver hat like Duval's, he calls it the Boss Spearman. No pik as this is the wrong thread
Have to keep on the leather subject.
Daves knife sheath is awsome, I like the basket weave and his new one he posted is just real art.
MS
-
GB, thanks, I call the color my Montana Sunset and the black beauty is just,Black
MS
-
Nice work, Slick. That Josey Wales rig looks good.
Dave, the push dager & sheath are really something. Very nice work.
-
Montana, That is a beauty of a gun rig pard, I like the coloring real well. I can visualize ole Clint Eastwood sportin that rig with no problem. :) ;) :D
Dave that knife is plumb awsome pard...pushdagger just sounds scary. :o The sheath is art work.
Wiley ;D
-
Thanks Will and Wiley,
Ya got me a wishin' here and I have the leather.....another Josey Wales fer ol Slick?
Right hand cross draw and a strong right? Iz gotta learn how ya know ;D
Been a half fast draw for many years now :)
-
Howdy Montana,
Great looking Josey Wales Rig! Beautiful color!
HowdyDave,
Beautiful work on the Knife & Sheath! They are both works of art. Love the lacing!
Thank you gents for sharing this with us.
-
WEll i just finished this one for my Thunder 3 1/2 tried it this time not dying the lining did not turn out to bad as far as that went , im trying to make the photos larget but might have to get EET or MT to tell me how to do that being i see slick has it down,
-
I have notice that duble clicking in the photo makes it biger
-
MHB nice job. great color. Your really getting the hang of it. Keep showing. KT
-
Missouri HB, there is a "How to" for posting pictures on the FAO thread, along with a whole host of great information. I use Photobucket for my pictures, and my wife's good quality SLR camera. The problem is the pictures are too clear, and show every little mistake you make.
I sure would like to see a picture of the back of that last holster you made. I'm curious as to how you attached the keeper strap to the back flap. There seems to be lots of ways to do it (tied, riveted, screwed, stapled) and I'm always looking for a better way to do it, one that makes the holster more secure.
Thanks for your posts, JD
-
hear ya go JD i just used one chigao screw and cut the back of the strap to make it tight coverd the in side of screw so not to scratch holster
-
Great holster MHB. Looks real good. You did a fine job on that one.
-
Nice work Missouri, that's one good looking holster
tEN wOLVES ;D
-
MHB, thanks very much for the pictures. I'm going to assume that it's a pretty tight fit, and that the keeper strap doesn't twist or move around, even with just a single screw in the middle.
That's just what I needed to see, so thanks again!
-
MBH, nice work and good ideas, want more piks.
JD, Dunt be afraid those imperfections after all, was the moanin' Lisa Perfect? ;D
Yer too hard on yerself.....me too, :)
MS
-
Great work MHB. .....and you said you just started?????? Looks like ya been at it for a while. ;D
If your in Missouri, we should get together and do some colaborating.
Nice clean looking work.
Hey JD, My wife is a pro photographer and used her SLR to do my pic (the back pics I did) so mistakes not only show, but jump out and wave a flag.
Your right on the money on that one.
I got some loading strips and shotgun belts done that I'm gonna try to post tonight.
~EE Taft~
-
Howdy MHB,
Great work you are doing there! Look forward to seeing your future projects.
-
This ol Dog is gonna learn some new tricks.
Attending a carving class next Saturday and the instructor brings the doughnuts from his bakery.
Till then I see the new Mancave is in need of some company so, looks like it's time to start on those Montana Slims.
Takes about 3 days to get one completed, lots of drying time.
Gotta have the rig done by June as I hit the road again for those summer matches. :)
Lots of nice leather on this thread and else where, need more piks Pards
MS
-
MHB, good lookin holster I like it. Looks to me like you are doing well in all areas, design, carving, stamping, coloring, sewing all look good to me. Just keep on doing it. :) ;) :D ;D
Wiley
-
Nice work, HB. That holster is nicely balanced looking. Good job on it.
-
HB has a way with his art work, fine craftsmanship.
Thanks for the pik HB, more?
-
Ahhhh,..I been looking at some nice work guys!
Watched the superbowl yesterday! WOOT! Had it on in the shop while I tinkered around with a gun rig,..then a really gaudy knife sheath,....lol.....guess I was in a bling mood ;D
(http://i144.photobucket.com/albums/r169/jamiecarrrocks/P1010013.jpg)
(http://i144.photobucket.com/albums/r169/jamiecarrrocks/bigholster.jpg)
Geaux Saints!!! :-*
-
that belt has 18-22magnum bullet loops,.....can I tell how much I HATE sewing lil 22 loops,.....
-
Farmer some nice looking leather work your showing.Knife and sheath pretty fancy.. The belt and holster tie it all together. Thanks for showing. KT
-
thanks,..they really don't go with each other,....just seperate items I was messing with. ;D
the sheath is black,...looks lighter in the pic,..but its really black.
-
WOW Farmer, your work is beautiful pard, that sheath is awesome, and so is the gun rig, you have really honed your craft well, thanks for the look see, and keep them coming.
Regards
tEN wOLVES ;D
-
thanks tenwolves,...
I guess it's reverse antiquing? ??? lol
-
Farmer
Man, those are good lookin.
WC
-
Nice job Farmer, I like 'em!
Nice old Buck Knife ya got there to!
Ned
-
Farmer, that's some mighty fine lookin leatherwork... I mean really purdy pardner!! :) ;) :D ;D
Wiley ;D
-
Howdy Farmer,
Beautiful job on the Holster rig and sheath! Thank you for sharing your work with us.
-
Here is a California style slim jim holster I made for a 1851 Navy, pretty standard style for the 1850's. The carving pattern is my goofy idea ( I did see some of it on the cover of a magazine, it wasn't on a holster) I am working on my non-artistic abilities ::). This is the first time I made a toe plug and sewed it in place, not as big a deal as I had thought it would be. :-\ I kind of like them now. ;)
Wiley :) ;) :D ;D
-
Howdy Wiley,
Beautiful job! The carving pattern is not a goofy idea. I really like it. This Holster looks right out of the pages of "Packing Iron". That 51' Navy will look right at home in this one. Many thanks for showing it to us.
-
Lookin good there Wiley!! Like the color! ;D :D ;D
-
Howdy WD
Great job.
WC
-
Wiley D, i like the look and color of that 51 holster verry nice
MHB
-
Nice work Wiley, it's beautiful, and your design Rocks.
tEN wOLVES ;D
-
Farmer and Wiley, you've both done some great work, and I sure appreciate you guys takin time to post pictures! JD
-
Farmer ya did it again, nice work and the sheath is Black. Looks kinda pink, But as you say it's black. :)
Nice leather
MS
-
Johnny, Dr. Bob,WC,MHB,TW,JD thanks a bunch for the compliments very much appreciated.
Wiley ;D
-
Wiley
great holster pard i love the carving design and that cail slim jim style is great to ill have to do one up for my 1851
but what im wanting to do is a Doc Holiday shoulder holster rig with the hidden knife sheath in it like in the latest issue
of guns of the old west
some day ill find a pattern i can modifiy to make it work LOL
Cowboy316
-
Hi Wiley nice job on the holster. Great color and its a biggun ;) KT
-
Holy Cow :o :o :o :o :o :o :o :o
There sure has been a lot of nice leather posted since I was on!!!!!!! Looks like there has been a lot of new Talent come a boad.
Welcome to all you new pards!!!! :) :) I am glad to allways see new blood! :) :) FE,Larrupin,I3,MS/MB,Farmer, you pards been doing some AWESOME leatherwork. I hope I didn't miss anyone name if I did i am sorry!! There was just so much to look at!! :o :o
Maybe winter will be over some day, and i will be back in the saddle again!!
Thanks to all for showing your goods!!
Later
ACE
-
Wiley, yer one of the best of the best, I like yer leather, top notch job.
316, break out yer mic and ruler and getter done, yer kin do it Pard.
MS
ps. oh, and a compass too :)
-
Here is a California style slim jim holster I made for a 1851 Navy, pretty standard style for the 1850's. The carving pattern is my goofy idea ( I did see some of it on the cover of a magazine, it wasn't on a holster) I am working on my non-artistic abilities ::). This is the first time I made a toe plug and sewed it in place, not as big a deal as I had thought it would be. :-\ I kind of like them now. ;)
Wiley :) ;) :D ;D
Wiley, I just have to get his back on top, it's awsome.
MS
ps. I use the 49ers patterns, wish me luck at the leather toolin' school on Sat. :)
-
I been takin' a break the past couple of days. My Dad is having some problems with emphysema and looking at a pretty rough road ahead.
Been spending some time with him and Mom trying to help out as much as I can. I'll probably be doing some more stuff over the next couple of day and posting. Like a dummy I sent out the SG belts and other stuff before I got pics. of them so I have none of those to post right now.
I'll be back with more in a couple of days.
Keep up the good work Pards. Love the looks of the leather bein' cranked out here. :)
~EE Taft~
-
I been takin' a break the past couple of days. My Dad is having some problems with emphysema and looking at a pretty rough road ahead.
Been spending some time with him and Mom trying to help out as much as I can. I'll probably be doing some more stuff over the next couple of day and posting. Like a dummy I sent out the SG belts and other stuff before I got pics. of them so I have none of those to post right now.
I'll be back with more in a couple of days.
Keep up the good work Pards. Love the looks of the leather bein' cranked out here. :)
~EE Taft~
Prayers up for yer Dad EET,
May the Lord richly bless you and yer Family in this time of need
Dads and Moms are special.
Takin' the day off, workin in the garage. Just dinkin'.
MS
-
KT, Ace, Montana, 316, thanks pards for the very nice comments it's much appreciated.
EE Taft, best to you and your family during these trying times with your dads illness prayers up for your dad young pard.
Wiley
-
Thanks fellers.
Don't turn off couse of the topic for me. It's good to take a break from troubles and look at some beautiful leatherwork.
Keep'um coming!
~EE Taft~
-
Some great work being posted here pards.Keep it up.EE, feel for ya pard,I have severe COPD so I know what your talking about.Dave :)
-
Well been busy got som stuff done hear is a auto holster i did for a a youn man at work its my twist to a wild bunch holster for a auto hope you all like it no carving but kind of got carrried away with the border stamping but o well.
-
Excellent :)
-
Over board MHB? Never too much, great holster Pard, yer giving me some ideas fer sure.
MS
-
Thanks MT you allways give support hears a cuple more if i can git them to post
-
MHB, I like em both, nice work, and the hand stitching, now thats craftmanship. :)
MS
-
Nice work Missouri, and the border looks good, it almost looks like it was laced until you look closer, keep up the good work, and thanks for sharing with us.
Regards
tEN wOLVES ;D
-
Thanks to all , hear is one that my 12 year old daughter did all by her self i desined the holster for a iver jhondon left hand and cut it out. she did all the rest by her self this was her first time doining leather work i think i found me a partner, (note) she also shoots with me and was taught with my 357 thunder and richard masion 38 with a 5 1/2 barel she shoots beter than most men i know i am very proud of her, yea i know im 55 with a 12 yr old and my oldsest is 37 who would have thought
-
Iver Jhonson is what i ment
-
That border stamping is GREAT!! Your daughter did a top notch job! Must get her talent from he old man! ::) ;D ;D
-
MHB, yer Daughter is off to a good start, she did darn good....A+
She has an Alias?
I got my start at the same age, my Cousin Vint, a PRCA all round Cowboy got me started.
Thanks fer the pik Pard and Pardette.
MS
-
She's on the right path, Missouri. If she keeps up like that one day she'll be better than all of us.
~EE Taft~
-
MHB
Nice work on the holsters.
Your daughter did great.
WC
-
Howdy Taft & MHB,
Beautiful work you Pard's have posted!
Many thanks for sharing it with us. Please keep em' coming.
MHB, you have a great partner!
-
Sorry to get in here so late .
MHB. those are some great looking holsters. You are doing some good work Pard. That daughter of yours must have been watching you work she did a great job on hers also. It sure is nice to be able to enjoy something with someone you love.
Wiley, that slim jim is fine. I really like the pattern you used and you did a great job of carving it.
-
Missouri, your work and now your Daughters, you have a talented household, at your Daughters age, I can't wait to see what she will be doing and a few more years, keep her going on this, and thanks for sharing.
Regards
tEN wOLVES ;D
-
MHB nice to have your daughter working along side u on a project u both like. Keep it up and show more picts. KT
-
MHB, I really like that first black one you made for your pard at work all of them are really well done. Your daughter has got the touch very good leatherwork on her holster, what a great age to get started in leathercrafting. :) ;) :D ;D
Wiley
Thanks GB for the kind remarks on the slim jim pard much appreciated.
WD ;D
-
Yer right Wiley, get started young but as ya get older ya kinda loose the fine touch in carving.
Shakey Slick :D
-
I'm gonna do my dangest to get the rest of my rig done this weekend. If I do I'll post some new pics.
We been busy for the week so ain't had much time to post. Hope all are well.
~EE Taft~
-
BTW, I thought I might show off the irons that are going to ride in my new rig this year. Just got 'em in yesterday.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0646.jpg)
-
Nice work EET,
What kind of dye and sealer do you use.
MS
-
Really nice work, Farmer. The sheath is very cool. The rig works nicely, too. I like that look.
That's a fine slimjim. Nice work on that tooling.
HB, that black holster with the border stamping looks great. I like the busy border with the simple lines. Looks good. Those other holsters look fine, too. Very nice work.
EE, that rig will look very good with those shootin irons in it. Well done.
Nice work, pards. I miss a day and look at all the eye candy that shows up. Thanks for the posts and pics.
-
Well generally I use Fiebing's Pro oil dye. As for sealer I've used it all and even some wax based home mixes, however as of lately I've been using Fiebing's Leather sheen or Saddle Lac spray.
~EE Taft~
-
Very nice EET, I like the look, and I also like stainless guns, you'll be looking good wearing this set up.
Regards
tEN wOLVES ;D
-
EET thats some nice holsters and revolvers you got there . Good Job. KT
-
EET,
Thanks, I'll check into the leather sheen, dunt want it too sheeny tho, I like the soft semi-gloss effect.
Slick.
Glad yer back M.Will, carefull of too many sweets Pard. :D
-
Well I've been asleep at the wheel here with so many posting so much nice work.
I'll likely miss someone, but MHB, Not only great work, but to have your daughter working leather and shooting with you is awesome! I was 40 when my son was born, which certainly wasn't planned! He's about to turn 20, which makes me 39 if I calculate correctly ;D
My grandson from my daughter is five, and he would love to go shoot with me. He hangs out with me in the shop and works on leather, so I have high hopes for him!
Mr Taft, nice Irons and nice holster. I made one similar to that for a friend lately; the first holster I've made that I thought wasn’t too bad.
-
Thanks, Slick. No such thing as too many sweets, though. ;D
-
Hey MS,
If your lookin' for semi gloss or satin look, I'd go with either Eco-flo Satin Shene orfor more gloss Eco-flo Super Shene.
I've also used Fiebing's Acrylic Resolene. I haven't used it much or recently, but from what I remember it worked pretty well
and has what they call a mellow gloss to it.
Hope this helps,
~EE Taft~
-
Some Ideas look real good on paper and some still look good when they are done but, some ideas just don't fly when it comes to function.
Thought I would try a pancake since I had never made one and I chose a little Sterling .22 that I have. Well the holster turned out OK but its not very functional when you are wearing it.
What did I do wrong, besides using that little 'no grip' ,22 for a pattern.
Oh the handle was broken when I got it and it is in the process of being fixed :-[
-
Howdy GB
Your behind the back holster looks fine, you did a nice job on it.
tEN wOLVES ;D
-
Thanks TW, I like the way it looks but that short grip on the pistol makes it a bear to get ahold of when its on your belt.
-
That holster looks like a good one, GB. I suspect that a little shorty grip like that will be difficult to grab in a hurry no matter what holster you put it in. Is there a magazine grip extension you can put on it to help that?
-
Thanks TW, I like the way it looks but that short grip on the pistol makes it a bear to get ahold of when its on your belt.
I know what you mean, I never could use little guns like that because off my big hands.
Ten ;D
-
No mag extensions that I know of but I did find out that once its on your belt, just behind your hip you can get ahold of it. I just wouldn't want to try a speed draw , might hit someone next to me in the head ::) ;D
-
Hey MS,
If your lookin' for semi gloss or satin look, I'd go with either Eco-flo Satin Shene orfor more gloss Eco-flo Super Shene.
I've also used Fiebing's Acrylic Resolene. I haven't used it much or recently, but from what I remember it worked pretty well
and has what they call a mellow gloss to it.
Hope this helps,
~EE Taft~
Thanks EET,
I use Eco-Flow Timber Brown dye and I', m not having mush luck sealing it with the Eco- Flow semi gloss sealer.
Black is the worst, rubbs off on yer clothing.
I miss the Neat Lac, cant get it anymore at Tandy. It's shiney tho
Black Beauty was done in Neat-lac, hung up out in the shed fer a week till the fumes died out. ;D
Here she is, I've posted her before but how she shines. 8)
(http://i120.photobucket.com/albums/o187/JakeHarlow/Blackbeauty.jpg)
-
Well GB, I don't know about all that behind the back draw thing :-\ ::)but the holster sure looks good nice leatherwork pard. :D
Wiley ;D
-
What we have here, as requested by the customer is a Plain Jane 1911 holster in brown. He did not want any stamping or lines of any sort, so that's what I did. The color is Fiebings oil Dark Brown, two coats, with a light coat of Neatsfoot in between, followed by a coat of Skidmores. I’m going to put a coat or two of some sealer, but I don’t know what yet.
The Fiebings produced more red than I would have liked. If someone could give me an idea of how I could have made it a little more brown and less red I would appreciate that.
I posted a picture of the back of the welt a few days ago, but for the most part I’ve managed to work out the problem. As with each holster I’ve learned something from building it. I believe the pattern comes from a combination of Outrider and Slowhand Bob, both of whom very generously shared their work with me. It might be one or the other, but they both gave me advice.
As always, constructive criticism is welcomed. Thanks, JD
(http://i165.photobucket.com/albums/u51/HarleyPastor/Harley19112.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Harley19115.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Harley19118.jpg)
-
Howdy JD
Very nice job.
To darken brown dye: I wet the project real good and let dye before I put any finish on.
WC
-
Very nice JD, you did a nice job.
tEN wOLVES :D
-
JD,
Just plain Awsome and the stitching is the best I've seen in a long time.
Yer giving lessons? ;D
-
Okay, heres the results of my carving and beveling class today, also did a coaster wid a flower on it .
Gave the flower to my Wife fer Valintines day. ::) Cheap? heck no, took me 2 hrs. to get it done. ;D
Here's the sample I made up for a slim jim holster, havent dyed it yet, what color do Y'all think? ::)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0175.jpg)
Slick :)
Here's an update on my practice pattern. I reworked the beveling and added some, learned how to walk, no excuses.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0180.jpg)
-
Slick,
Ya done REAL good!! Must be a quick learner!! ;D
-
Slick, it looks good to me, but I imagine you will hear someone say to make the swivel knife cuts deeper. Making those puppies deep enough is a real challenge as far as I'm concerned.
WC, let me make sure I understand you ('Cause I'm guessing I don't)
Do I wet the leather real good then dye it, or dye it, then wet it down real good and let it dry before doing anyting else to it.
Or, none of the above? Thanks very much, JD
-
MS,
Very nice carving, beautiful work. I like the band around the middle of the design. Very sharp!!
JD,
Very nice, simple to-the-point, good quality work. That's one of those holsters that says "I don't have to be beautiful, I just gotta be dangerous!"
Very impressive stuff. I gotta get some work done, but I've been tied up over the past couple of weeks and haven't got squat done. I'm gonna have to kick myself in the butt and get to work to catch up.
~EE Taft~
-
Slick great job. Will look outstanding when done.. KT
-
Hey slick when your done lerning you can give me lessons MHB i like it ill bet you got your wife a new chain saw fer xmass to hu,
-
Howdy JD,
Great job on the 1911 Holster! The workmanship, stitching and color are very nice.
Howdy MS,
Your carving looks very nice. Looks like your class is really paying off.
-
MS your gettin it on the carving, a class was what I needed to get started carving. The holster will look great.
JD, wow, that holster looks fantastic. You have done a great job. Your customer will be really lucky to get that one.
AC
-
Howdy MS, that practice piece looks great, you have a steady hand.
tEN wOLVES :D
-
Thanks Pards for yer encouragement and support and the class was full of experts and lots of help.
I had a scrap of leather for the project, was thin so I went as deep as I dared.Strapped the new blade and what a difference from the old ruby blade...WOW ::)
Next month were doing a horses head, now that will make my Sister happy. :)
Thanks,
MS
Never too old to learn new tricks
-
JD, that holster is really nice. Very good work on it. That should make him happy.
Slick, nice carving. That'll look really good no matter what color you choose. Good job.
-
Finally got the Scabbard done. I will have to post several times as my compression program has changed and can only get the pic size down to 88K.
AC
-
More Pics,
AC
-
Last Pic,
AC
-
AC, yer did good, nice from one end to the other, you have talent.
Thanks M.Will,
I dyed the leather piece and tried a new way of applying the dye.
Someone mentioned mixing the dye with EEVO, I mixed my Timber Brown with it and it came out fantastic.
I'll seal it with some Skidmores like JD mentioned and Johnny sent me the web site.
Hey I'm in the groove ::)
MS
-
Good job Slick.
AC, that is really something. Taking your time really paid off Pard.
-
Thanks MS and JB, I really enjoyed this project. Starting a floral carved 1911 Holster today. Just received my Blue Gun and Magazines. No time like the present to jump right in.
AC
-
AC, it came out beautiful, you really did a bang up job on this, you can be proud of your achievements.
tEN wOLVES ;D
-
Good lord AC why dont' ya just make a museum piece :o That dye mix is the cats meow ain't it! :) :) :) You better get registered :-\
-
Howdy All
I thought I would share a knife sheath I made for a customer, to his specifications,
tEN wOLVES
-
MORE PICTURES
-
Good lord AC why dont' ya just make a museum piece :o That dye mix is the cats meow ain't it! :) :) :) You better get registered :-\
Hay GCR, are you the one who posted the Cats Meow method?
Dang, that dye went on so smooth and filled in every nook and kranny. Didn't use much either.
Copyrite 2010
MS
-
TW great lookin knife sheath, thats an unusual lookin knife. I am glad I took my time on the rifle scabbard. I am really pleased with the way it turned out. Thanks for the nice words.
GCR, I don't think I can be included with museum quality yet, but it did turn out great. Thanks for the comment.
AC
-
HeyTW, that is a great looking sheath. I love the color and your lacing looks perfect. Very,very nice job.
-
Montana, looks like you've got a good grip on that leather carving really nice work ;) :D. Mighty good of ya to give your wife a carved rose... man that just about choked me up bud ::).
JD, you did a first class job on that 1911 holster very well done prad.
TW, very nice leatherwork on that sheath amigo.
Now JD and TW, what is this customer thing y'all both mentioned ??? Heck, I can't hardly give my leatherwork away as a door prize. Hmmmm I must be doing somethin wrong :-\,
Wiley ;D
-
AC thats a out standing all around job, color workmenship, carving ect. You out did your self.. KT
-
TW you have to show more of your work. Its great. I couldnt figure the shape of the sheath till saw the knife. :) Thats what I call CUSTOM. Thanks for showing.. KT
-
Howdy AC,
That is one beautiful Scabbard you have made! Everything about it is first class especially the carving. It looks right out of the pages of "Packing Iron".
Howdy TW,
Another outstanding piece of leather work from your shop. The carving and design are excellent. This sheath really compliments the knife in every way.
Many thanks to you Pards for sharing your work with us.
-
Wow, AC. That scabbard came out really great. The color is rich and shows off that tooling perfectly. Niced work.
TW, I like the slheath. It's different and totally correct for the piece. The triangles look good, for sure. Very good work.
-
WC, let me make sure I understand you ('Cause I'm guessing I don't)
Do I wet the leather real good then dye it, or dye it, then wet it down real good and let it dry before doing anyting else to it.
Or, none of the above? Thanks very much, JD
Howdy JD
When I have dyed something brown and it's not dark enough after it has dried, I will wet it real good and normally it will dry much darker.
Hope this helps.
WC
-
Howdy MS
Nice job on the carving.
The only thing I can see that needs a little more work is walking out the beveling tool marks. You get that down and you'll be on your way.
WC
-
Howdy AC
Nice job on the scabbard. I really like the tooling pattern. A little less background area would help to keep your eye on the pattern.
Pattern for the 1911 is very cool. Can't wait to see it finished.
WC
-
TW
Great job on the knife sheath.
WC
-
Thanks WC for the comeback, I agree on the background, got carried away I think. As far as the 1911 holster, I have it stained and tooled am in the process of lacing the holster with double loop lacing. I may have bit off more than I expected. Lacing is very time consuming. I also lined it. Will put up pics soon.
AC
-
Thanks AC,GB, Wiley, KT, Johnny, Marshall Will, and WC, your kind words are much appreciated, this was a different type sheath for me to do, that knife is really nice, and the way the maker wrapped the cord is pretty amazing, I made this sheath to my customers exact specifications, I hope he will be happy with it.
Thanks again for taking a look
tEN wOLVES ;D
-
WC, that is Exactly what I wanted to know. Thanks for that, I will know now for the next time
For all you guys who weighed in on my last holster, thanks very much. Besides Outrider and Slowhand Bob sending me patterns, Kid Terico also sent me a pattern that he developed for the 1911, and his advice has been most helpful and appreciated.
10 Wolves, that is an awesome looking knife and sheath, really off the hook stuff!
AC, you are doing amazing work! That scabbard turned out to look fantastic, and you should be very proud of that piece. The holster you are working on now looks great. I have managed to misplace my Stohlman holster book (How I did that with something so big I do not know!) but your design looks familiar. Is that where you got the idea?
Wiley, I use the term “Customer” loosely. I’ve got a group of guys I shoot with who are asking me to make things for them. At this point I’m giving them away or asking for whatever they think is fair to help cover costs. I haven’t felt my work was worthy of asking money for to be completely honest!
Slick, I’m sorry I didn’t back quick enough to tell you about Skidmores, but I knew someone would give you some good info. I read about it on this forum, and after using it, I haven’t found anything I would want to replace it with.
-
Mr. Wiley glad ya liked the leather, there's a lot of it going around.
The Misses got all choked up too, glad she liked it.
Looking for the next project, gonna do some tooling on a set of holsters, I'm like you, I end up giving it away sometimes.
Pards in need etc.
Good night all,
MS
-
No problem JD, I just need to find a local source for the Skidmore or have it shipped.
I'd like to try it.
Thanks
MS
-
JD, your on your game. That is exactly where I got the pattern, Stohlman's Holster Book.
AC
-
AC, I believe Dalton has used that pattern very sucessfully, and maybe the carving design as well. I'm looking forward to seeing what your carving looks like. You've been doing such a great job on everything you do I'm sure this project will look great too.
Slick, I had my Skidmores shipped direct. They were real good to work with. It's been a while since I ordered their product, but I seem to remember it was a small family company. I've used Montana Pitch Blend too, but I like Skidmores better, just a personal opinion.
-
Thanks Cowboy,
Yer right, I need to do more walking on the beveling, I have a lot of scraps I kin practice on :)
JD, looks like that Skidmore's only comes in one size, I'll order a can and give it a try.
If it's good enough fer you it's good enough fer me. ;D
MS
-
Thanks Cowboy,
Yer right, I need to do more walking on the beveling, I have a lot of scraps I kin practice on :)
JD, looks like that Skidmore's only comes in one size, I'll order a can and give it a try.
If it's good enough fer you it's good enough fer me. ;D
MS
Skidmore's comes in 1 1/2 & 6oz cans. We carry the "Cowboy Edition"
The company is really good to deal with. Vince Skidmore is a really good guy. I've a lot of time with him at the Sheridan Trade Shows over the years.
WC
-
Slick, IMO once you try Skidmores, you will not want to use anything else. I dyed a long strap of leather, then I divided it up in multiple sections. I applied every top coat I could lay my hands on. I bought small quantities of everything except Skidmores. I’d read so many positive things about it I went ahead about bought the 6oz container.
I still have that strip of leather, and the Skidmores went on the easiest, looked as good as any and better than most of the other products I tried, and it leaves the leather feeling really good; not greasy, but it doesn’t make it mushy. I think you will like it.
-
Thank you JD, I think my prayers have been answered ;D
6oz, how long does that last ya Pard? Seems ya dunt need to use too much. :)
MS
Walkin the bevel 8)
-
As the pros around here always say LIGHT COATS :D Be it EVOO Neatsfoot or much of anything else, light coats.
I guess it depends on how much you do, but so far this 6oz jar is working out fine. I'm no where near needing another one yet
-
TW, I'm sending for some, gotta try this stuff out.
MS
-
Thanks for the kind words JD, this was a different type knife sheath for me to do, but it was exactly the way he wanted it, so I hope he will be happy.
ten Wolves ;D
-
howdy Pards just finished these and posted themin the classifides heresmy cowboy cuffs i just finished
neats foot oiled and sunned and 2 coats of Skidores and sunned some more
thanks again for the support
Cowboy316
-
Nice Cowboy, Great leather ya got there and I like the color, my favorite.
Thanks for the formula.
Medium rare? ;D Just kidding Pard.
MS
Walikin the Beveler. ::)
-
Cowboy316 neat cuffs i like em havent tryed maken them yet nor spur straps but ill get to it one of thes days like i said i relly like em
-
Progress on my 1911 Holster todate........
AC
-
AC nice i like the pattern carving on that one looking good
-
Thanks, MHB for the kind words. That lacing is a bear, been dragin 16 feet of lace through all those little holes for two days.
AC
-
Ill bet thats a bear i havent lerened to do lacing yet been trying just to get the hand stiching down first , now will you habd stitch the holster now that the lacing is done?
-
No I'll lace the holster together after I sew the flap into a belt loop.
AC
-
AC, you have come a long way . Beautiful carving, beautiful color. You got the whole package in that one. Great job.
-
Fine cuffs, Cowboy. They look good with that finish.
AC, that's a really good-loooking holster. It's coming along nicely. Thanks for the preview.
-
AC Pard, you've taken to this leather work like a duck does to water, WOW, this holster isn't even finished and it's beautiful already, I love the look , the color is rich and antique, your carving just pops out on you, and the lacing is perfect, Heck I like everything about, it and it isn't even done yet, WELL DONE PARD...... ::) :o 8) ;D
tEN wOLVES ;D
-
Thanks GB, Marshal and TW, your opinions mean a lot.
AC
-
Well Snap Cattleman! What great work. I wish I lived closer to you (and WC, 10 Wolves, Kid Terico, Dalton, RT, the list goes on) I sure do like the look of that lacing, not to mention the excellent stamping and carving on the holster. You are doing awesome work!
-
Howdy Cowboy
Cuffs came out good.
WC
-
Howdy Cowboy,
Great job on your cuffs! Beautiful color! Sure wish I could get some sun to work with.
Howdy AC,
Very very nice! Beautiful job of carving! Look forward to seeing the finished product.
Thank you Gents for sharing your work with us.
-
Awsome AC, just plain Awsome.
The boarder caught my eye and the continuation of it all around is a great idea.
I'm not a gammer, but in leather ya gotta keep practicing. Thats me, practice, practice
Back to the beveling, Tied a rope to it fer a leach so I kin walk the bevel ::) ;D Just joshing. :)
ps:AC what is the belt gonna look like? Need piks when ya get done.
MS
Da Law 8)
-
Okay, heres the results of my carving and beveling class today, also did a coaster wid a flower on it .
Gave the flower to my Wife fer Valintines day. ::) Cheap? heck no, took me 2 hrs. to get it done. ;D
Here's the sample I made up for a slim jim holster, havent dyed it yet, what color do Y'all think? ::)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0175.jpg)
Slick :)
Here's an update on my practice pattern. I reworked the beveling and added some, learned how to walk, no excuses.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0180.jpg)
Trying to forward this with the info and piks.
-
Yer gettin her Slick, I knew that hoss wouldn't put an ole bronc stomper like you to walkin. Lookin good Pard. Keep it up.
-
Your practice is paying off Slick, it looks beautiful, keep up the great work pard
tEN wOLVES :D
-
Got the 1911 Holster done. Not real satisfied with the lacing on the seam. May try to do it over..Her are a couple of pics.
AC :-\
-
Montana, like they say around these parts "ain't no step for a stepper" good job on the leather carving pard. :) ;) :D ;D
Wiley
-
AC, great looking 1911 holster I like everthing about it. You do mighty good leatherwork. :) ;) :D ;D
Wiley
-
Thanks Wiley, like I said I may do the lacing over on the seam. I am happy with the upper portion. Still have to give it a few more coats of Skidmores. Again Thanks,
AC
-
AC, it finished up beautiful, and the lace looks fine to me, I think you did a great job on this. ::) :o 8)
tEN wOLVES :D
-
Thanks TW :)
AC
-
Thank you all for yer help and encouragment, this ol Bronc rider is very gratefull I didn't have to walk too far. ;D
AC, I must say, thats a lot of lacing, 16 footer eh. Mighty fine holster, you have talent. :)
-
Thanks MS, I do enjoy the craft and the satisfaction of a finished project. Plus the leather will outlive me and become something for my grandchildren.
AC
-
Howdy Montana,
Your carving is looking good! I can't wait to see it on a Holster.
Howdy AC,
That is a mighty fine look looking Holster! It is an all around great job especially the carving. I agree with TW... the lacing looks fine.
Thank you Gents for sharing your work with us.
-
Hey, I know its a few days late, but the cans of Skidmores I have are 1 pint cans. I got mine from the Leather Guy when he sat up at our State Rendezvous last year. They should last me a long time.
Montana, I would just oil it and give it some sun. Looks good.
DM
-
MS, the carving looks real professional!! Ya done good! ;D ;D ;D
AC, that is one fine looking holster. The lacing looks great to me! ;D ;D ;D
-
Here's a hand full I've been working on. The one on the far right is one I've had on here before and I'm going through it and cleaning it up.
The one right center is a rig I built a few years back for a guy. I'm going to be making a third holster for his rig in left strong side.
He has a right strong and a right cross draw now.
The one left center is my new rig. Left strong side. The right strong side will soon follow as well as the belt and other items.
The one far left is an addition to a ladies rig. Right cross draw. She already has dual strong sides. Her belt is contoured and has adjustable billets for fit.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0676.jpg)
A close up view of the ladies holster.....
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0674.jpg)
Once again, flattering mistakes. I've got some cleaning up to do on the ladies holster. I will be taking it back apart to do some final finish work.
So, what do ya think?
~EE Taft~
-
This thread is the best thing since peanut-butter. lots of talent out there, beautifull leather.
Glad ya got home okay Dalton, my Cuzzin is a Neb. Trooper in the Omaha area, watch out. ;D
Nice leather EET, nice work.
MS
-
Howdy
That's some good lookin work being posted.
Keep it up.
WC
-
KT i dont know what part of MO, your in but you sure put out some good work this old dog is working 3 days a week trying to learn how to do as goo as what the pards on this sight are putting out i still cant get that two tone dying down after you posted that one two tone rig i tried one and runed a holster well it dident work i went back and re dyed it black but the two tone is a nice touch i just cant seem to get the hang of it the dye keeps bleading over to places i dont want it but you sure got a fine bunch of holsters ther pard
MHB
-
KT is from Minnesota, not MO! ;D
Pretty much dead center in the state NW of Minneapolis.
Ned
-
Thanks ned i dont know what i was thinging i was sending that to ee taft but ive been thinking about kt a lot latley we have had several prayer circles for kt latley
-
Howdy Mr. Taft,
Those are some great looking Holster's you have posted there! A nice variety of looks and finishes, very well done. Many thanks for sharing your work with us. Please keep em' coming.
-
EE, those are some nice looking holsters.Dave :)
-
EE Taft, when Dave Cole says nice lookin holsters, he must be comparin them to his. His holsters are really good lookin and so are yours.
I've tried some two tone practice myself, and have not met with success. So like Missouri Half Breed I'm wondering what advice an accomplished guy like yourself would give to those wanting to improve on their two tone efforts.
Thanks a whole bunch for sharing those pictures, and any advice you can give is also greatly appreciated. JD
-
EE, those are some mighty fine looking holsters. I really like the design. The basket weave on that close up shot is very well done. Good job on the coloring also. :) ;) :D ;D
Wiley
-
Thank y'all for the compliments.
Oh, MHB, on the two tone jobs I got a letter and a word for ya.........
Q~TIPS!!!! I had a job come in some years back and the guy said " if ya can't two tone it, I don't want it!"
Now, mind you, I've done the "sunburst" look on some before where it is light in the middle faded out to dark,
but this guy wanted it to match his truck!! two tone brown.
After some trys and fails my wife said "Here honey, try a Q~tip."
I figured two things out that day.
1. Q~tips work!!
2. Wives is smart!!!!!!!!!!!!!!
Give that a shot and go slow, it'll work for ya.
~EE Taft~
-
EE Taft, when Dave Cole says nice lookin holsters, he must be comparin them to his. His holsters are really good lookin and so are yours.
I hope he ain't comparin' his to mine. Mine are just functional, his are art!
There's certainly some beautiful work on here. Hard fer this old cowboy ta keep up!
;D
~EE Taft~
-
One other bit of advice on the two tone.
If you notice around the area that I two tone there is a swivel knife line that marks the tooling area.
Make that line nice and deep. The deeper the line the better protection you have against bleeding over.
Hope this is of some help.
~EE Taft~
-
EE Taft, thanks for that tip on a deep line around the work. Thant's not something I would have noticed.
I think your work and Dave Cole's are both outstanding!
I'm posting a picture of this mag pouch, still damp from dye by the way for two reasons. One, because I told Marshall Will I would. I got the pattern from him, and though it looks nowhere near like the one he made he was still kind enough to take the time to talk it out with me.
The second reason I am posting a picutre now, is so I will have something to compare it with when we hand out "The Most Improved" award this year. The winner gets to spend a week taking lessons at WC's place, at their own expense of course ;D
I'd not tried something like this before and went about it all wrong. Now that I've made one the wrong way I'm going to see if I can improve on it; not the design, but my execution of it. The sewing is terrible, and trying to get things to line up and punch holes working with wet leather is something else. Cutting straight lines is really critical for something as linier as this piece. I didn't take time to finish any edges or anything like intentionally.. It is a practice piece.
A 1911 holster is no good without a mag holder or two so I need to work something out to make a half way decent one for my friends.
If someone wants to discuss how to go about this on a PM with me I'm all ears (and thumbs it appears)
(http://i165.photobucket.com/albums/u51/HarleyPastor/Harley1911mag1.jpg)
-
Looks good to me Pard.
Mag pouches with those pocket type pouches ain't easy to do, but you've pulled it off nicely.
Great work!
-
EE T, if you have some other method of building mag holders I sure would like to hear about it. I figure the more ways to do things the more ways I have to foul things up!
-
Howdy EE Taft
That is some good information pard, you do beautiful work and these holsters show it, thanks for sharing with all of us.
Regards
tEN wOLVES :D
-
Thatis pretty much the same way I do it. I have sometimes wrapped the bottom around to the back of the pouch for stitching, but it is much easier to stitch.
Sorry for the sloppy post, I'm holding my six month old girl and typing at the same time.
~EE Taft~
-
Well, I'm happy to share what little bit of smarts I have, if it can be of help.
Thank you for the compliment Sir.
~EE Taft~
-
JD,I have done mag holders like those before and those are probably more period correct than my other methods.Here's a couple of more ways to do it.Dave :)
This style was flapped and built up like a knife sheath with welts and then sewn to the belt per the customer.
(http://i43.photobucket.com/albums/e359/DCK954/LEATHER/wildeybelt3.jpg)
This is the style on use on most modern day guns.
(http://i43.photobucket.com/albums/e359/DCK954/Guns%20and%20gun%20leather/holster22.jpg)
-
I wannna be just like Dave Cole when I grow up............ ;D
Beautiful......just beautiful.
~EE Taft~
-
Just started a project on a set of holsters, thinking I'll give the tool job a try, just have to select a pattern I kin work with.
We have a Stohlmans pattern and how to book at the store we can use. I tried a duck but turned out more like a allegator.
Speaking of allegators, that a mighty fine 1911 holster Dave, period correct or not.
I like the ranger type belt, fact is, the whole rig is great.
MS
-
Heres the way I was talking of JD.
DM
-
That looks great Dalton, but now I'm trying to wrap my pea brain around how you accomplished that in the light of our PM conversations. So it looks like that top piece of leather you talked about folding over is just one piece, not with tabs cut in it. So you didn't sew that bottom piece but used snaps to hold it on?
I'm guessing you have a back piece folded over, and have sewn the lighter piece on the front. Did you wet that front piece to get the placement of the magazines correct?
It's a really good looking mag holder, and doable for me I think. When I look at Dave Cole's work I think "Not in a million years"
Dave, your stuff is flat outrageous
Thanks Dalton and Dave for sharing your thoughts and skills, JD
-
Ok. The back piece is all 1 piece that folds over the belt and is held with snaps. No cutting involved in it, other than making a rectangle and poking snap holes in it.
The magazine loop portion is the same as yours, with the tail on the inside, not the outside. Sew the tail first, then flip the rest of it up into position, and sew the sides, wet mold, and viola. Easy to take off and put on, and allows different widths of belts to be accomodated by changing the size of the back piece.
DM
-
Thanks pards ,but I see work here alot better than mine all the time.There is some real talent here.Dave :-[
-
Howdy JD
Here are a couple more ideas for you.
WC
-
Howdy All
Got this cool BBQ lighter but needed something to keep it in.
WC
-
That lighter and scabbard are great.Dave ;D
-
Now that lighter and scabbard is just cool!
I'll have my butt wrap for my new TTN done here in a bit, then I gotta get back to the real work.
Los of beautiful stuff, fellers. keep 'em comin'
~EE Taft~
-
Cool stuff WC,
tEN :D
-
OK, I'm satisfied now, re laced the seam an like the way it looks. Now to make ammo clip holders.
AC
-
AC, you have talent beyond words.
MS
-
Thank You MS, your comments are appreciated. You do great work also.
AC
-
Got a pic of the butt wrap I did today for my TTN.
Nothin' fancy, but itwill look good along with my new rig I'm doin'
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0679.jpg)
;D
Gotta cut some new lace and re do the laces, but I'm happy with it.
-
EE Taft, Great lookin butt wrap. I need to try that. How do you protect the stock as you lace to keep from scratching it?
AC
-
Anymore I just punch the holes just big enough to push the lacing through without a needle.
I was more worried about the pins on the spots rubbing the stock so I lined it with suede.
It's not stitched, just glued and the laces run through it
~EE Taft~
-
AC, it looks great, what size/type lace did you use, and is this a double loop? the lace almost looks like suede.
tEN wOLVES :)
-
AC, EE, and WC great looking work guys.
AC, I really like the look of that rig. The color is very nice.
-
TW, it is 1/8 " leather roughout on both sides about 1/16 ' thick. Yes it is double loop stich.
AC
-
Single mag pouch anyone?
WD ;D
-
Molded, fits like a glove, made to match. Why would anyone want more than one.
Yer did a superb job on it Wiley, ya put some time on this one, looks great. :)
MS
-
Dog gone, I've been away a few hours and everyone's in a posting mood. Where to start.
Dalton I will PM you tomorrow with some more questions on this mag pouch if you don’t mind.
WC that’s great looking 1911 leather. I really like the staggered mag holders, but after my experience of molding and sewing that looks like it is above my pay grade, to quote a certain president. Truthfully I’d love to know how to make that. I’ve seen those BBQ lighters around, but never with scabbard that cool!
Wiley, that is a real cool single mag pouch. I like the idea of single pouches because you can space them any way you want. Is it held on with a spring clip? That’s another one I would like to know how to make, so now I pictures of five different mag holders, and at this point I need to figure out how to make at least one of them, and make it look decent!
Dave Cole, you must be seeing different pictures than I am, because I’d be hard pressed to point out any work I’ve seen here better than yours. As good as yours? Sure, because we have some awesome leather guys here. Better? Not IMO. You Rock!
AC, you’ve made an outstanding Wild Bunch holster. You’ve gone ballistic in the talent department lately. BTW you’ve got a package coming your way. I know it shipped direct, but they use snail mail, so it may be next week before it arrives.
EE Taft, sharp looking butt cover!
Is this a great board or what!
-
Well, ya know, we all gotta cover our butts from time to time.
;D ;D :o ;D
~EE Taft~
-
Wiley, thats a fine looking pouch. Nice work Pard
-
Well pards there has been so much beautiful work posted in the last few days I would feel terrible if I accidently left someone out by name so I'll just say YEEEEEEEEEEHAAAAAAAAAAA!!! Y'all do mighty purdy leatherwork!!! :) ;) :D ;D
Oh, and thanks for the kind remarks on the single mag pouch sure do appreciated it.
Wiley ;D
-
TW, it is 1/8 " leather roughout on both sides about 1/16 ' thick. Yes it is double loop stich.
AC
AC, I really like the look of the double loop lace method, and use it all the time, I think it just adds more beauty to your piece, I've never used the rough out lace, but will give that a try in the future.
EE Taft, nice butt cover.
You pards are posting some very nice work, keep up the great work .
tEN Wolves ;D
-
Here's a slim jim I started working on last night.
Now, I'm not the best at carving, but I kinda got a wild hair and just went goofy.
Let me know what y'all think. Good and bad.
I'll try and post a pic. of it when I get it done too.
~EE Taft~
;D
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0684.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0683.jpg)
-
EET, I looked it over real close and looks like ya got all of the bases covered.
The seeds all the way across the top and the horizontal line on the left shows a steady hand.
I use a ruler myself,too shakey fer straight lines, but then thats old age fer ya. ;D
Nice pattern and ya dunn great EET.
RH cross draw? or, are you left handed like me? ::)
MS
-
Well Sir, This one here is gonna be a pair when I get around to doin' the other one.
This is a pattern for a Hickok style holster with the trigger flange removed to increase draw time.
They can be worn in a strong side (some call it crotch rocket) set up or reverse (calvary twist) draw,
or double cross draw. What ever one's pleasure.
These won't be mine personally, I'm just making them to have around in case someone else has a need for them.
Oh, and uh, I'm a righty. For some reason I just keep doin' the left one first here lately. ;D
~EE Taft~ Who shoots 'em gunfighter style ;D not very good but he does! ;)
-
Whal EET, yer doing it the Cowboyway, Code of the West :)
I taped up the back of the holster with that post office packaging roll of tape. Nice and thin light weight and comes off easily..Lernt that in class last Saturday.
Piks? Were gonna flood this thread with em as soon as we swivel along. ;D
MS
Sir? ::)
-
Howdy
The carving looks good on the Slim Jim. Keep it up.
WC
-
Nice looking EE, that will look good when finished
tEN wOLVES :D
-
Slick, you're getting the feel of tooling. Your stuff is looking nice.
AC, that 1911 holster came out really good. The tooling is clean and the lacing adds to it. Nice work.
EE, that handful is an eyeful. Very nice work on all of them.
JD, that mag holder came out fine. Your stitching is good and it'll work just fine. I'm looking forward to the next version you make.
Dave, Dalton, WC, Wiley, those are some very nice holsters. Good designs, great work carrying them out. Some beautiful work, there. Look out, though, JD is going to be a force to reckon with on the next one.
Nice Butt Cover, EE. That dark brown will be easy to touch up if you happen to drag it across one of your pistol hammers (I've done that a time or two). Be sure to post a pic if you make any changes. The tooling is looking good on that holster. It'll be a beautiful one when it's done.
I suppose we should have another pic of my mag holder so we have all the designs in one place. I love all the variety you pards have been posting. Very nice stuff.
-
Yup, that's the main reason I put butt wraps on my long guns, that and for puttin' 'em in the cart. I hate to try to slide 'em down in the cart and draggin' 'em along the edges. Makes a nice little scratch.
~EE Taft~
-
I like my butt covers to go up high enough to protect the stocks when holding them at port arms, too.
-
Nice but cover Will, EE Taft yours is spiffy too, here's one I did over a year ago for my Sharps, I also added about 1 1/2" of condensed rubber foam, to bring the length of pull to 15 1/2" I have long arms, and most rifle stocks are way too short, for me this is an easy way to build them up.
tEN wOLVES :)
-
EE, that one is gonna look good Pard. Be looking forward to the rest of the story ;) ;D
Marshal, yours and TW's butt covers where the inspiration for mine. I really like the longer style and I used some closed cell to lengthen and cushion. Works out great.
-
Man, you pards are knocking out some nice stuff.Dave :)
-
EE, TW, Marshal, those butt covers are great.
Marshal, that 1911 holster and mag pouch are just to good.
Wiley ;D
-
Thanks pards.
TW, I remember that cover. It really looks good and with the closed cell foam, it should be a very comfortable one to use. I always put a thin strip of foam in mine, but only enough to fill the butt piece out flat between the stitches. I hadn't considered padding it with a little extra. That's a good idea.
-
Nice leather on here today, this art is the best thing going.
I've decided not to make a butt cover fer my Stoeger. Gonna brand a stagecoach on it, saw one here on the thread and hope he dunt mind if I use his idea.
Gonna have a shock absorber on it tho as my shoulder sure gets bruised.
Thanks M Will, started tooling a pattern from Will G. That new swivel blade made all the difference in the world.
MS
-
Slick, I knew there was something goofy about you, and you let the cat out of the bag. SXS :o
-
I don't know what it is about butt covers. I've done alot of covers that have the cap on the end that cover the butt plate, but for some reason I don't like to cover the butt plate up on mine.
I like to leave my butt (plate) hangin' out. ;D
I've just always liked the looks of a steal butt plate, but also like the looks and protection of the wrap.
Those are some nice looking butt wraps fellers. I like these busy days too, lots of goodies to look at.
~EE Taft~
-
Lots of beautiful work posted by everyone. Some excellent examples of Butt Covers and carving.
Many thanks to all of you Gents for sharing your work with us.
-
JD yer right, I'm kinda goofy, dunn fergot bout the stage on the butt till I got on here this morning.
Tawk bout goofy JD, here's proof ;D
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0147.jpg)
Headed out yer way in June, just thought I'd give ya a heads up type warning. ::)
MS
-
EET,
Here's the A101 border you requested, I hope it shows up for you.
Close yer eyes Pards,.....okay, yer kin peek now.
MS
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0181.jpg)
-
Dang Pard!! there alot going on in that carving..... I'm gonna quit while I'm ahead!!
Good lookin' stuff.
~EE Taft~
-
;D Busy little feller aint it. ::)
Thanks Pard
MS
-
To all u pards out there it sure has been a pleasure to look at all the GREAT leather work while I am laid up. Thanks to u all and keep them comming. :) ;) KT
-
Have to agree with my pard Kid, great work and keep it coming. Dave :)
-
Kid, you get better and We'll entertain ya, might even make ya laugh. :)
Get better eh. 8)
Slick
-
Here is the completed Rig I've been practicing for. The RH Holster will hold my USFA .45 SAA 5-1/2" barrel. The LH Holster will hold my GWII .45 SAA 5-1/2" barrel. The Cross Draw Holster will hold my RM Transition .44 Colt. I made these Holsters long enough so they will accommodate my .38 Special SAA's with 7-1/2" barrels.
The RH and LH Holsters have a 15 degree barrel forward cant. This compensates for the slant the Holsters take due to my lack of six pack abs.
It is finished as follows: 11 hours in the Walnut dye, 1 coat of Lexol, 3 coats of Neets and 2 coats of Skidmores.
The workmanship is not perfect by any means but that probably adds to the "Hand Made Old Look". This was the look I was trying to get. I tried it on on with my guns and it feels good. It should work just fine for my new style (RH/LH strong side) of shooting.
Many thanks to Ten Wolves for all of his help and suggestions especially with the "Money Belt" style of Belt.
-
JM, that's some very nice work. Dave :)
-
Here is a insulated bottle canteen holder I made.
It hangs from the saddle horn and cinch holders.
-
JM
Those just plain beautiful. nice tooling style.
If you were goin' for old fashion, you hit the nail on the head.
~EE Taft~
-
Biscuit Joe,
I like it!!
Very nice lookin' Work pard.
~EE Taft~
-
Here is the completed Rig I've been practicing for. The RH Holster will hold my USFA .45 SAA 5-1/2" barrel. The LH Holster will hold my GWII .45 SAA 5-1/2" barrel. The Cross Draw Holster will hold my RM Transition .44 Colt. I made these Holsters long enough so they will accommodate my .38 Special SAA's with 7-1/2" barrels.
The RH and LH Holsters have a 15 degree barrel forward cant. This compensates for the slant the Holsters take due to my lack of six pack abs.
It is finished as follows: 11 hours in the Walnut dye, 1 coat of Lexol, 3 coats of Neets and 2 coats of Skidmores.
The workmanship is not perfect by any means but that probably adds to the "Hand Made Old Look". This was the look I was trying to get. I tried it on on with my guns and it feels good. It should work just fine for my new style (RH/LH strong side) of shooting.
Many thanks to Ten Wolves for all of his help and suggestions especially with the "Money Belt" style of Belt.
Johnny, you really really got it right, this rig looks like it did walk out of Packing Iron, your design, tooling and color make it look like it has been worn in many a skirmish, and lived to tell about it, it's hard to get this look out of a bottle, the natural walnut dye really shines through here, and the natural finish of oil and Skidmores put the finishing touch on this rig, making it versatile so you can also use this rig with your other guns, is just icing on cake, when you have 5 1/2" guns along with 7 1/2" guns, making your holsters for the long tube makes your holsters work for both, and for me I like the longer length in a holster, it allows you more carving / tooling room, and just plain looks good IMHO. Thanks for the kind words Johnny, I was happy to help, you did a great job, this is a work well done for sure. ::) :o 8)
tEN wOLVES
Biscuit Joe, you did a nice job on that canteen holder, good idea, being insulated will help too, thanks for the look see ;D
tEN wOLVES
-
Johnny,
Now I have to wipe the drool off of my Bomber Jacket!! Man oh man, that rig looks so fine!! Ya done real good!! ;D ;D ;D
-
Joe, that canteen is a ( pardon the pun) cool idea and you made it look real good. Nice work.
Johnny, that is one mighty fine looking rig my friend. Beautiful color and great carving with just enough bling. That one is a winner Pard
-
Johnny, The rig is beautifull, great job. Like the placement of the conchos.
EET, The bottle holder is first class, great tooling.
Just did a 1911 clip holder to get the feel for it. Will make a double to go with the holster I just made. This one I tried to lace like the holster, but it kept breaking about a third of the way around. So I ended up sewing it. Oh well....
AC
-
Heey like that shading :)It does give it that,I been practicing alot look so don't mess wid me!
-
Wow Johnny, you nailed that olde timey look perfectly. I agree with the other commentators in liking the longer look. I am curious though about using Lexol and Skidmores; I guess I thought they were essential for the same thing. No matter what the rig looks great
Bisquit Joe, that is a good looking canteen holder, and a great idea..
AC, you just keep on don’t you! The mag holder looks great. What are you doing to keep that dude on the belt? How about the weight of the front piece of leather? I’m inspired.
Thanks for sharing your work, JD
-
Johnny, ya took my breath away Pard with those fine lookin holster and belt.
The color is awsome, anteek, I like that.
I have 3 49ers on the drawing board, will have them done by mid May I hope.
Mean while here is a pik of my new holster in the making.Just finished up the toolin tanite. It gets it's liner glued on tomorrow.
I'm thinking of a second boarder on it tho as it is kinda wide.
Input gladly okay.
MS
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0185.jpg)
-
Looks good MS!
As for your border, take your dividers/compass, and poke 1 end into your current border, then scribe a narrow line around the current border. Then cut and bevel that to make a narrow bead. It will give you a raised bead around your carving, and will help fill that space.
DM
-
Thanks Dalton, just didn't want to take away from the tooling.
The beveled boarder will bring out the pattern. Got it Pard, Thanks
MS
-
Howdy JM
You did a wonderful job on the rig. Congrats.
AC
Mag holder looks good.
MS
You're doing good, keep it up.
WC
-
A feller asked me to build a second strong side for him. The original is about 3 years old and is sitting here with the new one.
A hot cup of joe for the first person to tell me which is the old and which is the new. ;D
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0687.jpg)
Once again, flattering mistakes. I know I say that too much, but it's true.
-
The one on the right. Nice match up, either way.
Good job, EET.
DM
-
Many thanks for all of the kind words Pards.
Howdy AC,
Very nice! That is a real clean and elegant carving design!
Howdy Montana,
Beautiful job of carving! Great looking color! Look for ward to seeing the finished product.
Howdy EE,
Those are some great looking Holsters. You did a fantastic job of matching everything especially the color.
Thank you Gents for sharing your work with us.
-
And DM is the winner of the cup of joe.
I figured it woundn't be long before the keen eyes of the pros would figure it out.
And if lookin' real close don't do it for ya, go back and look at my other pics. ;D
Thanks for a compliment DM. That's not my favorite design, but that feller sure liked it.
~EE Taft~
-
Well, I'm sure that your customer will be delighted! His opinion is the only one that counts. ::) ;D
-
Thanks Pards, I glued the liner on tanight, will know more tomorrow how that went.
Then it's stitch and sew. no machine, only these hands. Some day I get machine, maybe.
Definetly the one on the right EET, good color match.
-
Thanks pards, JD here is a pic of the back. This was just a test, the next will be two duals with some matching carving.
AC
Oops, here it is.
-
Montana thats gonna be a mighty fine rig, yer doin good.
EET, great job matching those up. That to me is one of the toughest things to do.
-
I've found over the years that two of the greatest tools in leather working is a good memory, and a good note book.
Ya never know when an old job is gonna come back and bite ya in the butt.
That right one is gonna need to wear a bit more to match, and putting natural wear on a holster is something
that can't be done by hand. Sure you can anteek a holster, but wear is another story.
Got a meeting today with the minds of the local shooting club, so I'll be out for a while.
Chat with y'all in a bit.
~EE Taft~
-
I wouldn't bet money tryin to guess which is new and which is used. :-\
-
I was just guessin the one on the right as really, they both look the same. Nice match.
Thanks GB, it was a toss up weither ta do it er not, wasn't that bad really as it is a large pattern.
Takin taday off tho, the Cave needs cleand and tools put away.
MS
-
Johnny, that rig looks really great. The finish is perfect for it. You wanted an authentic look and nailed it. That's a first rate job. It was worth all the planning you put into it.
BJ, that canteen holder is cool. I like the canvass top. Nice touch. The design is simple and attractive. Nice work.
AC, that's a mighty nice mag holder. The simple design on it looks elegant. Good work.
Slick, your holster is coming along fine. Dalton has a good suggestion with the border. That can offset the tooling nicely. A beader can be used to do the same thing, too. Looking forward to the finished pics.
EE, that's a perfect match job. My compliments on that. Good work.
-
AC, nice magazine holder pard
MS, that belt's going to match up real well with the holster.
EE, Great job of matching them up, I really couldn't tell by the pictures which one was the oldest, well done, that's a hard task to pull off.
My Best Regards to All
tEN Wolves ;D ;D
-
Thanks Will n' TW, yer input is a real inspiration to me, can't get tooo excited here tho, I'll run out of leather and ideas.
MS
-
Here is my Sunday with nothing to do project. Thought they would be nice little practice pieces and they were.
They only have one coat of EVOO on them and the sun left town before I got that far so maybe I can find a little sun tomorrow and then one more coat of oil.
-
Thanks for the kind replies guys. I don't have any old guns to make holsters for Just new ones. One day maybe I'll get some. I've been looking into mounted shooting, but the clubs keep getting kicked out of the arena they shoot in.
-
Very nice GB, I like the darker colors mixed in, when it's finish with the oil and sun it will really look great, I also like the lacing you did, very well done pard, thanks for the look see.
tEN wOLVES :D
-
Hey GB, Nice cuffs. Very slick.
This is a little project I slapped together for a pard of mine tonight.
I'm gonna have to go buy me one of these little derringers.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0692.jpg)
Gonna trim the little burs off, and finish it up here in a minute.
-
That's really cool EE Taft, it looks secure too, except for the trigger, otherwise nice design all around, those little derringers are neat, just too small for my hands LOL
tEN wOLVES :D
-
GB, yer Sunday do nuttin' projects are really nice.
Up to my elbows in glue today, fell on the floor and couldn't get up. ::) ;D
EET done it again. :D
-
Cattleman, thanks for taking a picture of the back of your mag holder. I really do appreciate it.
Gun Butcher, nice work on those cuffs buddy.
EE Taft, cool holster, dangerous looking gun. That exposed triger with no guard is a little on the scary side.
Be sure to check out my thread on the Boot Knife I received from Ned Buckshot. I couldn't post it here, because it's not something I did.
-
GB very nice cuffs. Here are a set of mine that are different. I put a knife sheath on one of the cuffs and a friend made a knife with my brand on the handle.KT
-
Forgot other pict.
-
Beautiful cuffs Kid, it's good see you feeling a little better, I really like that knife in the cuff idea,
tEN wOLVES :D
-
KT, it's good to see you post. I pray all is well, or getting well with you. That is an awesome set of cowboys cuffs you've got there. The whole thing is great, but I really like the color, JD
-
GB, those cuffs are really nice. I like the oiled look. Nice work on this project.
KT, that knife sheath is an interesting touch. Looks good. Good to see you posting.
EE, that holster is cool. I guess he won't be carrying it cocked, eh? Nice job.
-
I'd hope not!!
That little guy has a trick up it's sleeve. It's kind of a pop out holster, in that even if the strap is undone it will not come out
without a good pull sideways, so ya kinda gotta rock it, or pop it out.
It has a set of Chicago screws on the back to fasten it nice and snug to a pair of suspenders.
Had it on mine a while ago, and seemed pretty snug and comfortable.
When the guy asked for this type of design I was a little worried about safety, but it is a pretty solid little holster.
~EE Taft~
-
Howdy GB,
Great job on your Cuff's! That's a nice clean design and the natural color compliments the look.
Howdy EE,
Very cool! That is a real nifty design you have come up with for a Derringer. Great execution!
Howdy KT,
Good to see you posting. Beautiful set of Cuff's. That is a great idea putting a Sheath on a Cuff.
Many thanks to all of you Gent's for sharing your work with us.
-
Thanks to all of you for your comments.
EE, that is a great little holster very nicely done.
Kid, leave it to you to come up with the knife sheath idea. I love it. That color on your cuffs is great and I like the design.
-
Great looking stuff there pards.Dave ;D
-
Kt, hope this morning finds you well and in good spirits.
Sure like yer cuffs and the tooling is really great, nice back ground too.
Have a great day Pard. :)
MS
-
OK pards, it is time to show off your talents. I would like to see pictures of holsters, belts, sheaths, etc.... that you have made yourself. Let's see what ya got!!!!
__________________________
framed art boys room (http://pictureyourwalls.com/eshop/products.asp?mcid=11&mctgy=Baby's%20Room&scid=58&sctgy=Boys+Room)
contemporary furniture (http://www.instylelife.com)
Howdy nittinchabbra
Welcome to the forum, you will find all the pictures you want in this topic," Show Your Stuff ", which is where you are now, we have 532 pages of pictures of our work, so make yourself at home, and start at page one.
Regards
tEN wOLVES :D
-
KT, I love them cuffs. Beautiful and multi~functional. I hope this morning finds you well and on your way to gettin' back to what you love doin', Pard.
I musta been in a hurry last night and skipped right over your pics.
In a hurry or really sleepy.
Great work! To all of y'all.
~EE Taft~
-
Thanks to y'all for the comments on the little holster. I'm gonna try to finish up on my rig finally today, if I don't get too tuckered out.
I gotta say, Y'all have inspired me to jump in and get alot done, and I thank you kindly for that, all of ya.
And to the feller lookin' for pics. I think you'll find all the pics ya want here pard. These folks are true artists.
~EE Taft~
-
Thanks to all of u for the nice words. It was just awesome seeing all the great leather work when I was laid up. The best treatment I could get. I,m starting to feel a lot better and will have to start slowly to do my rigs. You will be sorry that I had all this time to think of some outlandish rigs to make. ;D ;D Thanks to all of u for helping get me through this. I couldnt have done it with out you. NOW lets show some leather. ;) ;)KT EET nice little holster, I have to try to make one some day. My wive has the guns but no holster.
-
Lots of nice looking work! :o
guess I'll throw one in,....
a rig I'm doing for a guy per his specs,.....he wanted a lot of bling...lol
(http://i144.photobucket.com/albums/r169/jamiecarrrocks/newg1.jpg)
-
Farmer thats a darn nice rig. Good design and color. KT
-
Farmer,
I'm sure he'll be tickled pink a very MANLY red!! ::) ;D
-
Farmer,
I'm sure he'll be tickled pink a very MANLY red!! ::) ;D
lol,..I thought it was kind of "busy" myself,...but heck,..whatever floats yer boat!
-
I like the thong idea on the belt :)
KT i wish i had your artistic view~~
-
Nice one Farmer. Good color and design.
8)
-
Nice one Farmer. Good color and design.
8)
Thanks,.....;.the color,.....I apply a slathering of acrylic mahogany,..the wipe just about most of it off using tan cote,....then it ends up with the dark staying in the cracks and cravacies,.....makes for a neat look....sorta aged,..almost "dirty" ;D
-
Nice rig Farmer, it turned out well, good color too
tEN wOLVES
-
Howdy Farmer,
Very nice work! Great workmanship! The Gentleman should be very pleased. Thank you for showing it to us.
-
Nice rig Farmer, and how do you take such beautifull photo's of your work?
Glad to hear KT your back to a little leather, good sign......
AC
-
Nice looking rig Farmer. I not a bling man myself but around here the Kid will make you like it ;) ;D
-
Easy on the eyes Farmer, and do I see some hand stitching? :)
The color is Awsome, I like it, good work Pard
Been Farming long? ::)
MS
-
Farmer, that rig looks goood. Nice color. I like the clean yet flashy look. Nice work.
-
That's some quality work there Farmer. As long as the guy payin the freight is happy it's all good.
I agree with Rick on the thong on the belt and with AC on the photo work
-
Finished the 1911 dual clip holder. Here is are pics with the holster.
AC
-
Wow! Just knocked my eyes out with them AC!! :o :D ;D
-
Thanks DB,
AC
-
That's a beautiful set up AC. You gonna do a matching belt too?
I'm like Dr. Bob, I gotta go put my eyes back in now.
oop.....there's one....... ;)
~EE Taft~
-
Howdy AC,
That is some awesome work! Great job especially the carving & lacing. Many thanks for sharing it with us.
-
Dang nice AC, beautiful all around.
tEN ;D
-
AC thats what I call nice work, design ect. Thanks for showing. KT
-
AC good looking rig real nice
-
AC, very nice!
DM
-
That looks great, AC. They make a nice set. Very good work.
-
Dang, I miss a day and you guys go crazy with the work.
Great stuff all of you.
WC
-
AC, that rig is just smokin! Beautiful work pard.
-
AC you are doing such awesome work. I really appreciate seeing the backside picture as well. You are knocking them out of the park. I love the mag holder, but the whole set up looks sharp. I can just imagine a laced belt to with that set up. I would think some dude with bucks galore would snap that kind of a rig up a whatever price you set, because it is so unique and classy. Just my opinion.
-
Time for you to open shop AC~~
-
Nice rig Farmer, and how do you take such beautifull photo's of your work?
Glad to hear KT your back to a little leather, good sign......
AC
one word,........NIKON ;D
I setup on a tripod,..and I have a dedicated area for taking pics of stuff. Then nikon digital cams come with some nice editing software. It definitely helps "sell" your work,..when they can see a nice kinda glamorous looking pic of a rig. ;D- marketing strategies-101
-
WOW :o :o :o
Yall sure do some nice work..
AC and Farmer very nice work
-
TW, Johnny M, EET, MHB, WC, DM, MWW, GB, JD, GCR, Kid & Knucklehead thanks for the kind words. I hope I didn't leave anybody out. My how our family is growing. You are all abunch of great Pards and I would like to meet you all in person someday. The talent we have here and the connection to each other is unequaled. Thanks again.
AC
-
;D It's okay AC, I understand, no hard feelings. :'(
MS from Home Alone :( ;D
-
I'm sooooooooo sorry MS ;D that wasn't a list of talented Pards, just the ones who had recent comments. Everyone here is talented beyond words and all are my Pards........Your never Home Alone as long as you can log on to CAS-City, hey hey.
AC
-
AC now that I,ve had my 2nd. operation and am starting to heal I just noticed you dont look at all like the DUKE. Dont know what was wrong with me.. ??? ;D ;D ;D KT
-
:o AC dunt look like the Duke? Oh, no. :o
Gonna post me new holster tamorrow, till then...it's intermission time. Pop-corn any one?
Like I say AC, yer leather makes mine look like kindergarten stuff. ;D
Ms,
aka, Latigo aka, aka, etc.
Quick recovery KT, it's leather slappin' time. :)
-
Got the other holster done tonight. I put it on an older belt that I'm thinkin' about redoing for this rig rather than building a new one. With the work load I've got for the spring it'll save me some time. There's a pic. of my SG belt in there too.
Lots of beautiful work on here. I'm tryin' ta keep up!! ;D
~EE Taft~
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0704.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0702.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0701.jpg)
-
EE, alittle redye job and some buffing and you are gonna have one fine looking rig there my friend.
Oh, and by the way, I quit trying to keep up with this bunch. Some of these boys don't ever sleep :o ::) ;D
-
Yeah, I don't sleep here lately. It started when I acually thought I could keep up. ;D
-
Good mornin' EE,
Well done! Very nice design with great workmanship! Many thanks for sharing this with us.
-
Red dye GB? Heck EET has a start on it all ready with his Red goat-T n' stinger.
Fine leather EET, just had to let the squirrel outa da bag. ;D
Yea, hes the Red Squirrel :P
-
EE, you've done a great job on that fancy black rig alright, but I would like to know about that shotgun belt.
It appears you have some single and double loops on that puppy. How does that work out, and how do you lay it out? Doubles on one side, singles on the other?
Inquiring minds would like to know!
-
EE looking good, keep it up. KT
-
EE
Good lookin work. Keep it up.
WC
-
That EET sure puts out some nice leather, he has talent beyond words..
Just finished up my Marshal J. Harlow holster, got back into carving n' toolin aint as bad as I thought it would be.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0189.jpg)
MS
-
Very nice EE Taft, that's one sharp looking rig, and that SG belt is a dandy too, thanks for sharing with us, and keep them coming as you can pard. :D
Slick, that holster came out nice pard, it also looks like your gun fits well too.
Regards
tEN wOLVES :)
-
Slick good job on the holster. KT
-
Thanks Ten and Kid, only took me a week ta gidder done.
Fits liike a glove TW, a fast draw rig fer sure.
I haven't decided what finish to put on it yet.Any suggestions? :)
MS
-
Howdy MS
Good job.
WC
-
Great lookin holster MS!! :o ;D
-
Mighty fine lookin holster there Slick; that's one you can really be proud of.
-
Well ant been on to much latley been working but i did find time to put this little stub nose together was good pratice for my carving if i keep it up fo 10 or 15 more yrs i might get the hang of it
-
Howdy Montana & Missouri,
That's some nice looking work you Gents have posted. Many thanks for sharing it with us.
-
MHB,
Your carving looks mighty fine there!! ;D ;D
-
Montana, that turned out mighty fine my friend.
Missouri, yours did also.
Ain't this leatherworking great ;D
-
Yea i like the color of slicks holster its a mighty fine holster
-
Here is some that I´ve done, have been working with leather for 3 years..
-
Missouri Half Breed, I like the design and color of the "Snubbie" That carving thing takes time bro. What they keep tellin me is to make deeper cuts with the swivel knife, like half the thickness of the leather. It's a good carving design. Keep it up Pard, keep it up. JD
-
Good job MHB! What JD said about the deeper cuts, is right on.
Boothill Bob, Welcome to CasCity, and very nice set of Cheyennes! Thats my personal favorite (right now) style of holster.
DM
-
Mighty fine work there bob thanks for sharing
-
Howdy Boothill Bob, I see this is your first post here, so let me be the first to welcome you to this fine fourm! This is a great place with a lot of great, helpful guys.
That is a real nice looking rig Bob, real nice indeed. The color is really outstanding; in fact everything about it looks professional to me. Thanks for sharing your work; you will be getting lots of welcomes and positive comments on your work, JD
Well shoot, while I was writing this two other Pards jumped in there to welcome you, so that makes me third, unless someone's writing something right this second!
-
EE, you've done a great job on that fancy black rig alright, but I would like to know about that shotgun belt.
It appears you have some single and double loops on that puppy. How does that work out, and how do you lay it out? Doubles on one side, singles on the other?
Inquiring minds would like to know!
Sorry to take so long gettin' back to you. Had a family thing goin' on last night that just plum tuckered me out.
The SG belt is set up with 4 doubles on the weak (left) side for loading my TTN, then there are 6 singles on the strong side spread apart to grab 2 for the 97, one between the index finger and middle finger, and one between the ring finger and little finger.
That way, when running my 97 I grab two from the double side and load over the top and then load strong hand with the singles.
I hope that makes sense to you.
I'll try to post a pic soon showing how I do it.
~EE Taft~
-
Boothill, thats a great looking rig. Very nice work and welcome to the forum. Always a pleasure to see new folks and their work.
-
Missouri, fine job, keep it up pard
Ten :D
Boothill Bob, Welcome to the forum, you did some fine work on this rig, and it looks great, Thanks for the look see, and make yourself at home.
tEN wOLVES :D ;D
-
Hey folks, this is the first time I've posted leather. Here's a pair of chaps I finished recently.
-
Boy I'm dumb posting that twice. I've been struggling like a dog with this technology. Skeet
-
Great lookin work Slick, MHB nice holster, and welcom Boothill Bob, Great rig, love the color. Welcome Skeeter, great Chaps
AC
-
Thanks Pards, fer the responce to my new holster, one more and a belt and it's off to the shoots this summer.
Great holster HB, I do like yer hand stitching and the overall looks of fine craftmanship.
Welcome to the fire Skeeter, checking out yer chaps as soon as I get in there.
MS
-
Here's some close-ups.
-
Boot Hill Bob, welcome Pard and great rig, you have talent..more piks?
Thanks AC, glad ya liked my holster, one more and a belt and I have a new rig fer the summer.
MS
-
Another...
-
Morning slick.JD AZ, bob, skeeter,and any body i misset every body is posting some fine stuff on hear
-
Here's the pocket...
-
Skeeter, it looks like you got the posting pictures thing figured out, your chaps came out great pard, you did a nice job on them, it's nice to finally see your work. ::) :o 8) keep it up pard, and thanks for the look see.
tEN wOLVES ;D
-
Here is a closeup on the holster for my rig, i love the cheyenne pattern.
The outher holster is a SlimJim, I´ve found the tolingpattern in my Bible
"Packing Iron" enjoy
BR//Boothill Bob
-
Now thats what i call some fancy carving looking good bob
-
Beautiful work, Bob.
Here's a rig...
-
I have the Cowboy Cawffee on, hows bout a mugg of it while we look over some of these Awsome Great Leathers.
I think I've found a home here on the "Leathersmiths"
Hope I was of some help Skeeter, it works fer me as I aint too litterit in the puter dept. ::)
No cabin fever here, thats fer sure. ;D
Bob's leather is AWSOME and Tawk bout Chaps, got me a thinking.
MS :)
JD, that GWII goes in n' out of that holster faster then ya kin kiss a duck. Smooth, watch out ;D
Yer might find out in June Pard
-
A werry nice rig Skeeter, I like the color and the plaines. Keep it up cowboy :)
-
Thanks Bob and everyone for the response. Leatherwork is sure keeping me out of trouble.
Slick, your answer didn't get through...
-
You pards are turning out some nice leather, Skeeter I'm glad you got your pictures posted, and Boothill Bob Welcome to the forum pard, you do some nice work, thanks pards for sharing your art.
Regards
tEN wOLVES :D
-
Boothill welcome aboard . Very nice work on the holsters. Keep posting . KT
-
Dang!!!
-
Skeeter & Bob
Great work both of you.
WC
-
Goofed again Skeeter, sent it to Boot Hill Bob.
Hey Bob, sorry :-[
MS
-
Just a pik of BB brother,
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0156.jpg)
-
Howdy Boot Hill bob, Skeeter & Montana,
That's some very nice looking work you Gents have posted. Lots of talent shining through. Many thanks for sharing it with us.
-
Thanks a lot, Slick. It came through. That sorts it out for me.
Nice leather, too, Slick.
Darn, but you're a friendly bunch around this camp fire.
-
Here is a complete equipment I made for a new cowboy. What do I have to pay for it
in the states?? I took $560 for it, it´s lined holsters and belt..
:)Boothill Bob :)
-
Nice work.
-
A set like that would be close to 1,000.00 would it not? The first set i got i paid 325.00 and that was two holsters and belt no loops. 4 years ago now~~
-
A grand fer sure Rick, nice leather Bob, we need to take care of the new shooters and if we kin help,well, why not eh.
I remember those days when I first started out, Pay back time.
Sl;ick
ps. Skeeter, we aint friendly really, it's "Just the Cowboy Way" n' Code of the West ;D
-
Well you boys are gettin ahead of me again.
Bob, Skeeter,and Montana that is some great lookin work you all have posted. All of it is top shelf, just outatanding.
-
Here are a couple holsters I,m working on. I,m slow at this point of my recovery. I want them to look aged when I,m done. Not sure of color but it will come to me. No idea on the belt and no idea when I,ll be done. I dont know much at all. ??? ??? ;D Here they are.. KT
-
Howdy Kid Terico
Your design on these holsters are different, and I like it, some times simplicity can be elegant, it a nice clean look, and I also like your border tooling, can't wait to see these finished.
tEN wOLVES :D
-
WELL KT, ya sure haven't lost yer touch!! ;D Glad to see you back in the Shop!!
-
Glad to see yoyu are back KT, take it slow.
AC ;D
-
Kid, it does my heart good to see you back at it. Doesn't look like you have lost a step. I love that design it is very unusual and your carving looks great.
Sometimes going slow is a good thing.
-
Project for my Boss, small electronic device holder.
AC
-
OK, my head is offically spinning trying to keep up with the postings here.
Bob from Sweden, you have got this stuff nailed, very nice work for sure.
EE T, thanks for that explaination on the why for the shotgun belt. I do understand where you are coming from
Skeeter, super job on the chaps and the holster-belt combo. You did a great job with that money belt, and the color rocks!
KT, good to see you at it again, and I don't recall seeing you do that kind of a rig before, but it looks good.
Sorry if memory failed anywhere in between
Hey Slick, the Pine State Biscuit in June works for me; lookin forward to meeting ya face to face!
-
Well here is the bottom line. I looked at all the beautiful leatherwork posted since my last visit, which is a bunch, and I like every bit of it ;D ;D ;D. I would like to say KT nice to see ya back pard good looking holsters they will be beautiful when you're finished. Howdy Boothill Bob very nice leatherwork pard. :) ;) :D ;D
Wiley
-
JD time to make some thing besides bling. ;) KT
-
Ahhh,the King of Bling returns,i knew you were fiddlin at the leather table ;D A huge thank you to KT also..You'll have to wait to see it. :)Lets just say KT is a very nice person!!! Thanks very much KT..
KT you are a true visionary,how did you come up with that design?
-
BRAIN DEAD ;D ;D ;D KT
-
Hey Kid, that is an AWSOME piece of art.WOW :o
AC did it again, bet his Boss is a happy camper. ;D
JD, yer on Pard,it's the PSB fer sure, maybe The Oaks Amusement Prk will be open by then eh.
And to think I passed up a good job in Portland fer one in Seattle.But really, I like my R&R in Oregon.
Started tooling on the second holster tanight, so far so good. :) Perfect match, never, impossible.
MS
-
This is the second of this design I have made. The first one was for a Law Enforcement Officer made to fit a 1.5 inch belt. I made this one to fit a cowboy gun belt 2.5 inches. I think this design is "legal" for Wild Bunch"? ( I don't shoot Wild Bunch"). What I am not sure about is the exposed trigger. If anyone knows please respond.
Thank you
Wiley
-
Thanks to everyone .for the nice words I,m sort of excited to see how I finish it myself. ;D KT
Wiley nice job on the holster. KT
-
Man some very nice carving and leather work showin up again..Thanks for sharing your stuff... :)
Just a side note,have you guys seen that knife that Josh has been doin for Wad Watkins,whew man!
-
Wiley, ya did it again, a fine work of art, love the color, looks like the brown I just used on my holster.
Second holster is all tooled up, got it done tanight. Now fer some hand stitching OOOOps, gotta make a liner fer it, dye and stitch.
Got carried away there fer a second.. ::) ;D
-
Verry nice holsters KT, like the tooling a lot ;D
-
Wiley Desperado here is your answer regarding the trigger guard
http://www.sassnet.com/Downloads/RO/SASSWBHandbook_Jan2010_final.pdf
:) Boothill Bob :)
-
KT, good to see you back in the saddle.
Wiley - good job. I've just done my first carved holster. But I ain't showin' it ;D
AZ - I might do the same for my digital camera. Neat.
Here's a basket-weave 1890s holster. (My photography needs improvement, I know)
-
This is my hyper-authentic, beat-up, three-loop, slow draw holster. A lot of old time holsters were like this. Nowadays we use the term 'carry holster' but in the nineteenth century all holsters were carry holsters. Still, I wouldn't like to be in a gunfight with this one.
-
Nice. ;)
-
This is becoming a full time job, just trying to keep up with you guys, but it is a labor of love. The only thing better than looking at all these fine rigs is trying to improve my own skills.
Great work Pards. Keep them coming.
-
Mornin' Boot Hill, KT, AC, Wiley & Skeeter,
Beautiful work you Gents have posted! A genuine pleasure to look at! Many thanks for sharing it with us.
Kt, it is great to see you back in the saddle again.
a
-
Every bodys new work looks awsome.
Kid good to see you around a little more, glad you're feeling some better! ;D
Ned
-
Another slow-draw holster from Packing Iron. A south-western style, I think. Skeet.
-
Doggone!! y'all been busy over the past couple of days.
I ain't gonna name names cause I'm sure I'll miss someone, but there is some right purty stuff poppin' up on here.
I got some stuff in the workin's that I'll post soon. I just can't keep up with y'all.
Great work Pards!!
~EE Taft~ ;D
-
Wiley, that's a good looking holster, and from what I've heard it's perfectly legal. They talk about the slide and ejection port, not the trigger guard.
Skeeter, your holsters may (or may not) be slow for CAS but they sure do look nice. I would like to make a money style belt, and you've done a real nice job with the ones you've shown us. What weight leather are you using for those?
Gun Butcher, same here about the full time job lookin at new work, but it's great to see as I'm sure you agree ;D
-
Johnny M thank you. Its slow but little by little.. KT
-
Skeet,
I really like both of your "slow draw" holsters and belts!! The second one is simple & elegant! ;D ;D ;D ;D ;D
KT,
I'll echo Johnny, great to see you posting and putting up some pics!!
-
Thanks guys for the kind words.
JD, I'm using 4-5 ounce veg-tan leather. I think some leather workers use 3-4. I wanted to use pebble-grain calf-skin but I couldn't find any. But they used whatever was available way back.
-
Howdy Gents, and good morning :D
You're all getting a great start today, AC, that's a nice case, the boss should be very happy :o :D
Wiley, that holster is beautiful pard, I suppose as long as there isn't one in the chamber it would be as safe as pie.
Skeeter, it really is nice to see your work after all this time, and it's beautiful pard, keep it up.
Best regards to all you pards
tEN wOLVES :D
-
Skeeter, nuttin wrong with the Pik, tawk about nice, this rig is awsome. I like the way ya did the belt, telll us yer secrete.
I wanna make one here one day for my 49ers.
Please post yer carved creations,,dunt want to pick it apart, we just want to see it.
MS
ps. Morning Y'all Cawffee is on, get yer mugg over here. Gots plenty. ;D
-
Nice work Wiley and Skeeter!
Wiley, the exposed trigger is legal for WB, BUT, it is not legal for some other types of action shooting, at least on our range. We have an Action Pistol club that shoots on our range, and they require the trigger to be covered, I presume mainly due to being cocked and locked on some of their stages. I dont know about IPSC, and all those different groups.
DM
-
Howdy...
I have a problem. I´m not happy with my sewed in toeplugs. Have just finisched a holster
that I´m going to trow away >:( . I handstitch all my holsters and belts, does someone have pics
how to saw a toeplug at the right way??
:) BhB :)
-
See Ned Buckshot,i'll post a pic of a holster he done for me here in a bit.
-
Here is the s$%# holster >:(
-
Here is the darn toeplug
-
Bob, I recommend the CD produced by Chuck Burrows called 'Frontier Holsters with Chuck Burrows'. He is a top western leatherworker. The CD is available from Center Cross Instructional Videos at www.ccinstructionalvideos.com
The carving on that holster is great.
Slick, thanks. I'll post that holster.
-
Thans Skeeter, I will get that video...
-
Boothill, no need to chuck such a beautiful holster, remove the plug and restich the toe without. A lot of the fellows don't use toe plugs because they can trap dirt and moisture. If your doing a replica I see your problem, but the holster can be sold without the plug and you can do another.
AC
-
Bob, toe plugs are hard. Looking at your picture, it appears that the plug has sunk down slightly in the middle. That's happened to me. One way to stop that is to insert a shaped stick in the holster that stops the plug from sinking when you pull on the thread.
Also, I glue together two pieces of leather to form the plug so it's fairly thick. Then I glue it in and leave overnight so it's as firm as possible before sewing.
-
Tanx guys for the tip... Will try that.. The holster may live some more days 8)
-
Here is my free space ;D
Du u folks have pics on yours??
-
Howdy Skeeter
Those are good lookin holsters.
Keep it up.
WC
-
Here is the darn toeplug
Howdy
You can wet the plug and shove a piece of dowel down in the holster and flatten out the plug.
WC
-
Thanks to all you cowboys for the kind remarks about the 1911 holster much appreciated. Boothill Bob what a novel idea, the SASS Wild Bunch handbook, wow!! thanks very much pard. Now why didn't I think of that :-\? TW, DM and JD really appreciate your opinions also.
Skeeter, I really like the authentic old holster styles much more than the speed rigs, and my friend the ones you made are beauties.
Boothill Bob I like your free space. Good luck on the toe plug you did a great job of sewing it in place and the holster is very nicely done.
Wiley ;D
-
Does anyone have instructions how I can make a metal lined holster, like an
Evil Roy rig?? I will try to make one, why stop now ;D
-
Tanx Wiley... I´m adout to make a WB holster myself, pic is coming when it finished :)
-
Nice holster BHB, I like the swivel work ya did, my next 3 49ers are gonna have that pattern on them.
I dunt bother with the plugs, I leave my holsters open ended, gives the fuzzy bunnies a way to get out.
MS
-
Howdy all,
As usual, I miss a week or three ??? and have to spend an entire evening catching up on all the beautiful work happening here. What can I say, y'all are arteeesions..... uh, artisticles...... oh heck, real good leather do'ers! ;D ::) ;D
Boothill Bob,
Your workspace is toooooooo neat, you're a sick, sick man! Set's a bad example for me to try to follow. ;)
Keep up the pretty stuff, I'm not working on anything right now and don't know when I'll be able to get back to my bench. I actually can't even see it right now for all the crap piled on it! 8)
Safe trails,
CKid
-
As always, you all have done some great stuff. I've missed a couple days and there are way too many to comment on individually. Thanks for the pics and explanations.
Welcome to the forum, Boothill Bob. Looking forward to more of your posts.
Glad to see you back in the fire, Kid. We missed your regular posts.
Doggone beautiful work, pards.
-
Heres a new holster I just started thanks to a pattern by Johnny McCrae sent me. Thanks Johnny.
AC
-
That'll be nice, AC. Those oak leaves look really good.
-
Thanks Marshal, never done Oak Leaves before, like the way they look....
AC
-
AC should make for nice looking holsters. KT
-
Thanks KT, How ya doing? Hope your recovery is coming along...
AC
-
Toe Plugs? We don't need no stinkin Toe Plugs ! Sorry, I couldn't help myself. Bob, if you have any other seemingly impossible situations to fix, don't dump anything until you consult WC. I knew he would have a solution for you!
AC, looks like you've got a good start on those Oak Leaves. I'm looking forward to seeing them finished.
-
I like oak leaves :) Nice AC :)
-
Yeah, yeah, this is a bit artsy.
The chaps don't have buckles or zips. The legs are held together the old-fashioned way, by leather lacing fixed in place top and bottom by copper rivets.
I don't know if rootin' tootin' cowboys had man-bags but listen guys - I'm in touch with my feelings.
The holster is from page 98 of Packing Iron.
My dad got the half-hunter watch in India way back.
I'm not really making a rig every day like Kid Terico; it's just that I've got a backlog of work I've never posted.
[Dead link removed by moderator]
-
Hey, man bags are okay if'n your holdin' bullets or a hideout gun in them.
Nice work.
-
AC, thats goona be a real nice holster. I like that pattern and I know you will do a nice job on it.
Skeeter, good looking stuff. That rig looks great as do the other items in the pic
-
Thanks guys. Yeah, I've got a deringer and a toad-stabber in that man-bag - so I can hold my head high.
-
Howdy AC,
I like the way you have placed the carving pattern to fit the Holster. I'm really looking forward to seeing the finished Holster. Your work is top notch!
Howdy Skeeter,
Beautiful work! The Holster has a real elegant look to it. Many thanks for sharing your talents with us.
-
Thanks JD, GCR, GB and Johnny, just gettin up and having my first cup. Can't wait to get started on the carving, stamping.
;D AC
-
Thanks Wiley, Johnny, GB, Santee.
AC, good luck with that carving. I've put off that aspect of leather work until recently. Now I'm hooked.
-
Skeeter, I always wondered why you never posted any pictures, I guess you were just too busy making all this beautiful stuff, you really have done well, and it's nice to finally be able to see it, you're an artist for sure, thanks for the look see Pard, it was worth the wait. ::) :o 8) ;D
tEN wOLVES ;D
-
Thanks, 10W, it does my heart good to hear these kind words. Skeet
-
Got the skirt stamped,
AC
-
Verry nice border AC, have to remember thar one, looking forward to see the holster..
And Skeeter, love that holstermodel, I should have the pattern for it..
Now I have a 1911 Norinco in my hand, will be fun to make a WB holster for it..
-
Great border AC. I may have to borrow that one.
-
Go right ahead, it is these two tools, D447S &N900
AC
-
Carving is done, here are some pics....
AC
-
Onemore...
AC
-
Nice result, AC! And speedy, too!
-
AC, you have seen carving and made it yours. That looks great Pard. Oh, thanks for the tool # for that border.
-
All thats left is couple coats of EVOO and Skidmores.
AC
-
AC, that is one beautiful holster, your carving skills have improved leaps and bounds, although even your early work look good to me, I like the color on this holster too, nice border, just really nice all around. Thanks for the look see pard. ::) :o 8) :D
tEN wOLVES ;D
-
Thanks TW, I made this one out of very heavy skirting leather (12 to 13oz). I really liked the tooling properties of this weight of leather. The color matches an old saddle I have, I wanted it to look very old. I think it turned out great. (The color does hide my mistakes, ha ha) Thanks again.
AC
-
AC, that turned out very, very nice. Beautiful job.
-
Thanks GB,
AC
-
AC,
Simply gorgeous!!! I'm sitting here drooling big time! WOW!!!!! ;D ;) ;D
-
Thanks Dr. Bob, I have darkened the two straps since the last pics. Looks even better now. Just waiting for the leather to dry so I can put the finish on. Then maybe a belt and a cross draw.... For next weekend...
AC
-
Be sure to show the whole rig when you're done!! ;D
-
Great looking holster AC you are doing some real nice leather carving.
WD
-
Thanks Wiley, so do you!
AC
-
AC, yer the Master, I do like Oak. Nice art-work.
MS
-
Thanks Montana This was my first Oak carving. Used a Stohlman pattern modified to fit the holster.
Here is the pic after darkening the straps.
AC
-
AC
Great job.
WC
-
AC, I agree, it looks even better darker.
tEN :D
-
AC ya outdone yer self man, that really looks great!
-
Thanks WC, your opinion means alot to me. Thanks JD an TW .
AC
-
AC, an all around A+
I see you double stitched the stress point, I lke that and the hand stitiching is great..
You picked a great pattern and the color is easy on the eyes..
I just finished glueing the liner on the holster and I'll let it dry fer a day er two. Picked up a 1/16 tube for my punch, will do up the holes tomorrow and start up the long proscess....good music and rythem will getter done.
Slick,
Dances with Leather. ;D
-
Great work, AC.
-
AC!!! nice holster :o
-
Howdy AC,
That is an awesome Holster! Everything about is first class. Many thanks for sharing it with us.
-
;D Thanks Johnny, Montana, Skeeter and Boothill.
AC
-
Here is a pair of Dodge city holsters I made for my first CAS rig
-
Nicely done Bob, and I like the softer finish.
tEN wOLVES :D
-
Howdy Boothill.
Great looking Holsters. Nifty design and neat job of stamping. Thanks for showing em' to us.
-
Good lookin set of holsters, BB
AC
-
I made this holster yesterday. Dyed it in coffee. Dragged it behind the car, gave it to to my beagle to play with, jumped up and down on it. Suddenly it's an antique.
-
No that's my style Skeeter! ;D
Love it!
Ned
-
Nice Skeeter.. If I would drag it after my car i sould be wet, we have a meter of snow here ;)
-
Bob, Great looking set of holsters. Love that color and the workmanship is first class.
Skeeter, I like it man. It speaks of trials and tribulations ;D
-
Instant Antique ! Nice work
-
Bob, if you do as weel in CAS as ya doin making holsters ewel have it made.
Nice match.
-
That's some very beautiful leatherwork, Skeeter. The holster is clean, crisp and very well done. The simple lines say a lot. That new "antique" really does look the part. That's some fine workmanship.
AC, that oak leaf holster came out great. I like the dark color on it. Nice job.
BH, those Dodge City holsters are really nice. The color really sets off the border design. Good work.
-
Nice work Skeeter,
AC
-
AC great leatherwork as I said before.
Boothill Bob, those are a very well done pair of holsters cowboy, I like everything about them.
Skeeter, that holster is a beauty it looks like you found it in Wyatt Earps ole trunk.
This holster will be part of a wild bunch rig once I make the mag pouch and belt.
Wiley ;D
-
Lotta sewin on that one Wiley. looks real good and I like the color.
-
Very nice Wiley, good clean lines and just the right amount of tooling, well done pard, this will make you a great WB holster.
tEN wOLVES :D
-
Looks great Wiley!!
-
Verry nice holster Wiley, like the color. I just made a pattern for
my WB holster, pics are coming up soon ;)
-
Howdy
BB, Skeeter & Wiley
Nice work guys. Keep it up.
WC
-
Thanks, everyone. It was fun aging that holster. I was gonna make a belt to go with it but I can't bring myself to abuse that much good leather.
Great job, Wiley.
-
Howdy Skeeter,
I can find some coffee and a car but could I rent your Beagle? Seriously, that is a great look! You did a very nice job of antiquing.
Howdy Wiley,
Beautiful job on the 1911 Holster! As TW said, good clean lines and just the right amount of tooling.
Many thanks to you Gents for sharing your work with us
-
Thanks, Johnny.
Hey, Boothill, you showed a Dodge holster. This is my stab at it - the R. E. Rice holster on page 101 of Packing Iron. Skeet
[Dead link removed by moderator]
-
Skeeter, it looks real good. The simple deocration and the clean lines really appeal to me.
-
Thanks, GB. I copied the decoration on the original. But it's time for me to try carving now. I've carved one holster. I've gotta try another.
-
Very nice Skeeter, I agree with Gun Butcher, good clean lines and it has an authentic look to it.
tEN wOLVES :D
-
Work of art Wiley, my favorite color as well, cant wait to see the rest of yer wild bunch creations.
Might be able to post a pik of my new almost perfect matched holsters this weekend.
Are any 2 ever alike? :)
Boot Hill and Skeeter did it again, mighty fine leather there Pards...??? is, kin ya shoot?? ;D
MS
-
I can shoot MS, second place in the swedish championship and second place in the nordic championship. If I hade the money I would came to the states and beat u guys ;-)
Nice holster there Skeeter, is it water moulded?
-
Hey Slick, you dun drug me down to earth - but Bob, I'm mighty impressed. Swedish top gun!
No, it isn't water-molded. I only do that as a last resort if the holster is too tight. I'm not sure it's old-time authentic to water-mold. It's authenticity that does it for me, though I love to see the fabulous speed-rigs, B-movie rigs and bling that pards show on this site.
Wiley, that's a terrific WB holster. William Holden would be proud to wear it. Can't wait to see the rest...
Thanks 10W. For me, half the fun is designing the pattern and trying to get clean lines like the old-timers.
-
You have to have a gun is Sweden don't ya? Do they support you cowboy shooting pretty much?
-
Rick, CAS is a growing sport over here, we have only 350-400 active cowboys/girls in sweden but we
have fun when we meet. Muddflat Mike was shooting here last sommer, it was verry nice to
meet him..
Here I have made a pattern for my wild bunch holster, I stole the model from Mernickel, but I dont
think its going to be as nice as his holster ;)
-
Nice work guys!
Skeeter, the Plum Creek that is stamped on that holster, is now Lexington, NE, where I live now. I have wanted to make that holster, with the name and give it to the museum, but havent done it yet.
DM
EDIT! OOPS. I didnt have my book in front of me, and didnt realize there were two Rice holsters in the book. The one I was thinking of is on page 106 and is marked WF Rice.
DM
-
Mr. Bob, yer welcome over here any time, and, we have plenty of Lutifisk so leave yers at home. :)
Yer a Champion Bob, but I get the last place on the bottom ;D
Nice leather ya did up, very nice.
MS
-
Thanks to all you good cowboys for the kind remarks on the Wild Bunch 1911 holster much appreciated, I'll post the rig when it is finished.
Skeeter, another gear looking holster. Don't you just love that book Packing Iron? What a resource.
Boothill Bob, we are looking forward to seeing that WB holster pard.
Wiley
-
Wiley, tawkin bout Packin' Iron, my instructor recommended it, learnin a lot from those classes.
One holster complete, the second one is in the clamps all glued up. Looks like GranMa in the beauty salon. ::)
MS
-
:o Wow Wiley, that 1911 rig is awesome. You are very talented. Can't wait to see the belt and mag holders.
AC
-
M Slick,
Better not let Grandam hear you say that!! ::) ::) ;) ;D :D
-
Dalton, thanks for the edit. You had me all confused with the Plum Creek stuff. ??? ;D
-
I was kinda confused too, when looking at yours. I rememberd it was a looped holster, but also remembered all the holes punched into it. Had to dig the book out last night and look!
Yours is still a very nice holster. Good job!
DM
-
;D Dr, Bob, woodn't be the first time I got my mouth washed out wid soap.. ::)
Took the clamps offa the holster, glue worked good...thanks EET aka SS :)
-
Bro. Slick, I am anxious to see the finished rig that you are working on.
-
Meeee 2 :D
-
Hey M slick im just starting a black cayon holster from will gh, got it cut out and will be posting later the trick is im going to also be doing one in cross draw wish me luck i know you like this style i just sold the black cayon rig i made so im starting anouther Half breed
-
The hoslster is coming along just fine, it wunt be done berfore it's Time. Soon I hope.
HB, hers a pair of Black Canyons I made for my Brother, didn't have the conchos on yet.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0156.jpg)
Here' a pik of Black Beauty and the Sunset rig
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0173.jpg)
I like Will G's patterns, he's one of the best of the best.
MS
ps. I'll have the Harlow rig posted by this weekend
-
MT your quite welcome for the glue tip. I hope it works out good for ya.
Can't wait to see the end result of your hard work, Pard.
Speakin' of work, I need to get back to the cave.
I'm gonna hold off a bit til my new bunch of tools get here.
~EE Taft~
-
Very nice WB holster, Wiley. That will look great with a matching belt and mag holder. Looks good.
Nice dodge City rig, Skeeter. VEry authentic looking. Nice work.
Looking forward to seeing the holster you make from that pattern, BH. Looks like the strap will be laced in the center. Cool.
Slick, nice looking double rig. The conchos really work on them. Nice work, there.
-
Howdy Pards
I just had to split several post off our Show your Stuff thread, and send it too BUNKHOUSE RAMBLINGS, we're ending up with way to much conversation that is off topic and has nothing to do with the intent of this thread, so please try to stay on topic, for off topic conversations and subject matter, post it on the BUNKHOUSE RAMBLINGs thread.
Thanks for your cooperation
tEN wOLVES
-
Sorry TW. will do better in the future. I havent even been able to figure out how to blame this on my wife. ;D KT
-
Thank you M.Will
TW, I just knew this was gonna happen, would just a plain sorry do?
Here's a pik, my very first CAS rig
(http://i120.photobucket.com/albums/o187/JakeHarlow/SlicksHolsteronGuncart.jpg)
MS :)
-
Montana, the rigs you have posted the last few days look great. Nice clean lines and just enough bling, also very nice coloring.
-
Montana, Good looking gun rig pardner.
WD
-
MS some good looking leather your a posting. KT
-
Thanks pards, I still have that rig, I use it as a loaner fer the new kids who wanna be a CAS
New Kids, heck Y'all are a lot younger than I am.
Thanks again, glad ya liked it.
MS
-
Nice work, Slick.
-
Purty! Nice edges, too.
-
Howdy Montana,
Nice looking rig! Clean and neat with good workmanship! Many thanks for showing it to us.
-
Handsome rig, Mr. Slick.
Boothill, I like your 'Komplett Rigg' on your excellent website.
-
Tanx Skeeter. Now I have made a wild bunch holster and a mag holder, pics is coming soon :o
-
Slick, nice work Pard, very nice.
Boothill Bob, you've got an excellent website with a whole lot of great looking leather. I saw the pattern you posted of the WB rig, so I'm looking forward to seeing that one as well.
-
Thanks Pards, yer encouragement keeps me going, I do like leather.
Still working on the 2nd. holster, I'll gitter done yet. :)
MS
-
Here is my Wild Bunch holster, better pic is coming.. :)
-
Boothill Bob, That is a very nice looking 1911 holster and mag pouch, the design,construction, sewing and coloring are all very well done. You are a skilled leatherworker.
Wiley
-
Tanx Wiley, it was fun do do that, it my first pistol holster.
;D
-
Boothill thats some nice looking leather work your showing.. keep it up. KT
-
Howdy Boothill Bob
That's a beautiful Wild Bunch rig, as others have said , your a talented young pard, keep up the great work, and thanks for the look see. ::) :o 8)
Regards
tEN wOLVES :D
-
Nice WB rig, Bob.
-
Howdy BB
That's a good lookin set. Nice work.
WC
-
I've shown the holster, here is the rig. The cartridge belt is a Will Ghromley pattern. I made it with bullet loops for when you don't feel like carrying a mag pouch but you want some extra ammo. I call it the South Texas Rancher. Hope you like it.
WD
-
Beautiful color Wiley!!
Good job on that!
DM
-
Howdy Wiley
Pard, your rig looks fantastic, it's just the right amount of everything, and a beautiful color too, I like the style, it keeps with the western theme, and you can always add a mag pouch too, Wiley what kind of a 1911 do you have holstered there, I still haven't got mine yet, I'm strongly looking at the Springfield Armory TRP, but haven't moved on it yet, anyway great work pard, and thanks for sharing.
tEN wOLVES :D
-
DM and TW thanks so much for the kind remarks real glad you like the 1911 rig.
WD
-
That's not a rig,it's a holster riggin ;D
-
Good work, Wiley. Seriously cool.
-
Wiley you havnt lost your touch. Great rig. KT
-
Boothill and Wiley, both great looking rigs Pards. Two completely different styles and colors and they both appeal to me. Keep up the good work .
-
Verry nice rig Wiley, I like the color and model. Super :o
-
Bob did it again, Hez good.
MS
-
MS, I'm not good, I'm the best, in Sweden anyway ;D
I think there is 3 or 4 guys making holsters iver here,
that I now of :)
-
Howdy Wiley
Mighty nice lookin.
WC
-
Thanks to all you good pards for the compliments on the 1911 rig very much appreciated.
Wiley
-
Wiley is the best of the best Bob, over here anyway. ;)
I come in last, 1st. place on the bottom. ;D
Ya dun good Wiley, I'm just glad I'm yer Frin. ::)
I'll have the holster dunn tanight, might be late before I kin get it posted...sorry. :-[
MS
-
Think im going to get my hip waders on
-
Nice first rig, Slick. Save that one so you can admire it in years to come.
Cool WB rig, BH. I like the color with that simple border work. Nice.
Wiley, that rig looks great. The bullet loops is a good idea. Very professional.
-
Whew, Just finished my holster a mate to the first one.. My first real tooling job since 1975
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0193.jpg)
Now I have to do the ranger belt to match.
MS
-
Good job, Slick. You matched that one nicely. Thanks for the pics. The ranger belt will look good with those.
-
Thank you M.Will, and thanks for yer support and ideas, now fer more projects. Knife Sheath. ;D
MS
-
Howdy Wiley, Boothill & Montana,
That is some real quality work you Gents have posted. A genuine pleasure to look at. Many thanks for sharing it with us.
-
Slick, ya did real good! That’s a powerful lot of carvin between them two gun buckets. Doin a belt for guys our size, well, now that’s a lot of work, but I’m sure yer up to it :D
Thanks for sharing the pics you have lately. Keep on Preachin! JD
-
Hey Slick, you did good pard, my first carving scared me, I didn't want to goof anything up, then after getting the feel of things it was very enjoyable, your holsters look great, and you did a nice job of the carving, I agree with Marshal Will, that the holsters would look good on a Ranger Belt, thanks for the look see.
tEN wOLVES :D
-
Slick
Great job.
WC
-
Montana, you did real good my friend. When you get started on that belt its gonna look like a mile of leather to tool but don't let it buffalo ya. I know you will do as good or better than you did with the holsters.
-
Good lookin' w*rk Slick. Very nice carving and nicely matched.
Here's some pics of a rig I started on today. This one is a donation to the St. Jude's Charity Shoot in Monmouth, Ill
It's just a start, I plan on doin' loops that are black and maybe spots. Not sure yet.
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0730.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0729.jpg)
-
EET nice work. Keep it up. KT
-
Very nice EE Taft, your work is always easy on the eye, I like that basket weave stamp, and the way you did your border tooling, and the all around good looking two tone effect.
tEN wOLVES
-
Very nice EE Taft, your work is always easy on the eye, I like that basket weave stamp, and the way you did your border tooling, and the all around good looking two tone effect.
tEN wOLVES
+1 from me. I do like the two-tone
-
I seem to get lots of comments on my Two Tone rigs.
They are fun to make and they are very eye catching and fun to wear.
~EE Taft~
-
Howdy EE
Very nice job. Good straight basketweave.
WC
-
EE, that's a fine-looking holster. It'll really look good when it's finished. Thanks for the pics.
-
That's outstand EE Taft. I'm looking forward to seeing that baby put together!
-
Need som help where can a find a duble sholder holster rig like the one jessey james wore pattern perferd have on of you al done one my son wants to carry 3 guns so i figured that and a strong side would do the trick
MHB
-
http://www.cascity.com/forumhall/index.php/topic,31441.0.html
-
Howdy EE,
Very nice! Look forward to seeing the finished Holster. Many thanks for sharing this with us.
-
Thanks all! I have some more stuff in the works that will be posted soon.
~EE Taft~
-
;D Thanks to all of my Frins who took time to look at my leather projects, yer a Great bunch of Pards.
Leather class next Saturday, gonna take a lesson on a horses head and if it turns out okay, I'll make it into a check book for my Sister.
She's been waiting now fer 32 yrs....patient Little gal eh. :)
MS
EET...ya did it again, yer one of the best of the best and fer a good cause too.
I'm proud of ya Pard....fer a squirrel that is. ;D
-
Been so busy doing projects I got behind on checkin out the work you Pards are doing.
MS, your Black Canyon Rig and the first Cas Rig are top notch, and your current rig is lookin great, like the color and carving.
Boothill, great Wild Bunch rig.
Wiley, you have also out done yourself on that Wild Bunch setup. Really like the color.
EE Taft, That two toned rig your workin on is WOW!!! How do you do the two toned, I always seem to get it muddled.
AC
-
I'll give ya some details on the two tone here in a bit. I'm gettin' ready to cook the first T~bone I've had in three years
Mmmmmmm T bone....... My mouth is waterin' already.
Be back with details for you Pard.
~EE Taft~ ;D
-
Thanks AC, now I'm ready fer some more projects.
EET, helps to get a paycheck in order to get those T-bones eh.
Waiting fer yer process.
MS
-
Well, as I said hiccup...... (boy that was a good T bone) as I've said before, the first thing to hit the leather after tooling is the dye, at which point I do the delicate stuff first. QTIPS WORK GREAT!!!! use a Q tip in the color of dye that you want and apply to the area that you want colored.
Ya might want to meditate or something first. Make sure your steady and don't get the color on anything it ain't 'spose to be on.
That's it! not hard, just take your time and when you are done seal 'er up with your choice of finish. (note, if you think it looks good before you finish it, It will look GREAT after it's finished.
I have also used small art brushes to do this but really, the Qtips work better and hold enough dye to work with.
Before you apply, make sure you don't have too much dye in the Qtip. use a scrap and roll the Qtip on it to take off the extra dye. Then use just like a pen on the leather.
I hope this don't sound too dumb to try, but it works great for me.
~EE Taft~
-
Thanks again to you cowboys for the kind remarks means a whole lot when it comes from this talented gathering of leatherworkers.
Montana, You did mighty good with the leather carving on those holsters and the coloring is great. Looking forward to seeing that ranger belt pard.
EE Taft, That two tone holster is looking good very nice basket weave. We'll be looking forward to the finished product.
WD
-
It's been a while since I've posted anything. I recently took a holster class at our local Tandy put on by Bobby Rose of Cattail Creek Leather and Saddlery. I know Bobby checks in here from time to time, though I don’t recall seeing him post here.
He did an excellent job putting on a basic holster making class. I brought two of my friends from church, and they both learned a lot. I’ve not made a Slim Jim before, and I have to say it’s not my favorite style of holster, but I’m glad I got a chance to make one, or two
Because of all of you guys, I have a pretty good grip on the basics, and had enough time to start two holsters. I decided I wanted to put spots on one, so I had to line it. Because we were doing things as a group, I didn’t have time to stamp the holsters as much as I would normally have so I used an E-294 stamp to cover the front. I put the spots on at home and finished up both holsters.
I’m still having an issue with a clean look on the outside of the main seam stitch line, but I’m working on it. Because of Bobby’s class I’ve finally made the switch to two needle one thread sewing.
(http://i165.photobucket.com/albums/u51/HarleyPastor/Tandyclassholsters.jpg)
-
Howdy JD
Great job. You're gettin the hang of this.
WC
-
JD, I gotta say, those are nice. Simple yet very very elegant.
I love seein people make there way in this hobby. It shows with every project that they do, the increase in knowlege and moving forward. It is impressive to see.
I think we all remember our very first leather projects. Look back at them, and then look at your latest and you'll see a time line of success that you created. No one can take credit for it but you.
Great work Pard. Keep 'em comin'
~EE Taft~
-
JD you have come a long way. Nice Keep it up. KT
-
JD I love those holsters, now I have to do a spotted holster my self :o
I like the color and the finich.. Keep it up my friend :D
-
Great slim jims, JD. Skeet
-
Great looking slim jims, JD, muy bueno.
WBC
-
JD, great job. Those slim jims are very period lookin, like the collor and spots.
AC
-
Howdy JD,
They look great! Nice job of placing the spots! Many thanks for sharing them with us
-
JD, those are great. Nice clean lines and just enough decoration. You did a very nice job on those. I like the color and your use of the spots. Good Job.
-
Thanks for all of the kind comments. I've found that using Standard Rivet's spot setter makes setting spots very easy.
You guys on the forum are the reason I've been able to do any of this, and I sure appreciate all the help. JD
-
Howdy JD
Nice work all around pard, I'm glad you are giving the saddle stitch a try, and those Standard Rivet Spot Setters are the best, I've been using them for a few years noW, it really makes setting spots easy and precise, your Slim Jims came out fine, and the stitching looks good too, thanks for the look see. ::) :o 8)
tEN wOLVES :D
-
JD!!! Very good work! I am so glad you are getting the hang of that stitching!
PS, your envelope is still sitting here, and hopefully I will get it off today. Been a little hectic..
DM
-
Thank you Wiley and thanks fer those hints and suggestions ya gave to me.
JD, Yer did it again Pard, those holsters are Awesome,ya out did yerself.
EET, yer okay Squirrel, you have talent and we like yer leather, keep it up.
MS
Back to carving class again on Saturday, doing a horses head this time. :)
-
Nice work on them Slim Jims JD! ;D
Safe trails,
CKid
-
Got the other St Jude's holster cut and tooled. Gotta get the belt goin' now.
I'll post some pics of it all when I'm done with 'er.
Keep pluggin' away Pards.
Oh, BTW, Got my ugly mug up on here for the whole world to see too. ;D
~EE Taft~
-
Nice texture :)
-
JD, I like those slim jim's you made pard they look real good.
WD
-
EE Taft I should have know you're a red head :o I use to be one once upon a time (a long time ago) I said something about my grey hair recently and my daughter let me know "Dad, it's not grey, it's white" She's been disinherited :P
Once again thanks for the kind words, coming you guys it means a lot.
Hey CKid, it’s good to hear from you. It’s been a while.
-
Yup, we're a dyin' breed.........or so I've heard. ;D
Those are indeed some beautiful holsters JD. Keep up the good work.
~EE Taft~
-
:o Oh my gawd EET, watcha stairing at? The Stars????
Thanks Pard fer the piks, I really like yer projects and fer worthy causes as well.
-
Just gotter done, here it is, hope Y'all like it...
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0196.jpg)
Yer know, I'm running out of projects. :o
MS
-
Nice Montana :D, like the pattern and the color... Do u guys make many holsters on a year?
Here in Sweden we are 3 or for holstermakers and I´m making about 9-10 holsters /year.
I can´t make a living on it. But it´s a great hobby and thats the main thing ;D
-
Howdy
MS
That is sweet.
WC
-
MS, that some mighty fine leather carving.
WD
-
Howdy Montana,
Very nice! Great job of carving! This Sheath really compliments the knife. Thank you for sharing it with us.
-
Well, with the good lookin' woman behind the camera I was seein' stars and seein' doubles too.
have a look......
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0743.jpg)
Got a bit more finishin' to do on the one on the right.
-
MS, that sheath is a dandy, it looks great ::) you did a nice job of it. :D
EE Taft, Your holsters are looking great, can't wait to see them finished
tEN wOLVES :D
-
E E T your holsters are looking good i hope one of these days i cand do as good of work the two tone sets it off i still ant got that down even tried Q tips like you said. M slick my will GH Black cayon holster is comming along good fixen to start the hand stichen boy thats a long pice of thread to do it all in one pice, the next thing is that the guy im doing this for wants a right hand cross draw that matches it i think youn seen the strong side i did for my cayon rig i used the standing libirty half and he wants it the same this will be my first attemt a a cross draw so lord knows how many pices of leather ill rune befor getting it right to all of you on this forum id like to say you are a good bunch of pards the info and suport that you guys give keep a old cowpolk like me trying. i would also like to put a specal thanks to Will GH for being one of the nisiest pards ive ever had the pleser of chating with it seams that me and him are both old partatroopers. i was with the 82 airborne and the 1st inf 2bd ranger bat back in the 70s so to all thanks
-
M slick this is one i did for myself
-
Steady, Steady. That's the way ya gotta do it. Make sure you get some practice before you start on the job.
Give 'er another shot. I'm sure you can do it. If I can, anyone can.
Good luck,
~EE Taft~
-
Wow MHB, You got one heck of a nice shine on that one. Looks great!
~EE Taft~
-
Thank you Johnny, Cpt. Wiley, WC, BHBob, TW, EETaka S.Squirrle, and MHB for taking yer time to gander at my new project.
Many thanks toy Y'all for sharing yer Talents and fine leather, I've learned a lot from all of you.
Yer right MHB, Will G's b.canyon I think is the best fitting holster you kin get along with the 49ers, I like em all.
Thanks Will G for making this all possible, yes I know, you say were full of it, but then, I'm a story teller by trade. ;D
Belt time, ranger style, will post Jakes Rig when I get it done, gonna do a John Wiley rig one day :)
I like naming my gun rigs, they have a special story behind em.
Yer did a great job on that holster MHB, ewel have ta fill me in on the black dye job, I like it.
MS
-
Slick, that sheath looks good. You are gettin the hang of this leather thing no doubt about it.
EE, that is going to be a pair to draw to my friend. great work.
MHB, very nice looking holster. It almost looks like patent leather.
-
EE, those are turning out real purdy.
MHB, nice looking holster pard you should certainly be proud of your leatherwork.
WD
-
Looks like the ranger belt is on hold fer awhile, has a Lawdawg in need, it's Slick to the rescue..Back up time. 8)
Here's the whole set in one pik, minus the belt.Oh heck, I'll getter done before ya know it. :)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0198.jpg)
Slicker than slick and lighting fast....It's Slick that's slow....but, draws in a hurry ;D
First place on the bottom is a hard one to get, believe me, I know.
Yer right Wiley, that EET has a way with leather, now if I kin get him to slow down a bit, I kin catch up.
MS 8)
-
Slick, I think you might get the hang of this leather stuff! Real good there Pard, Holsters and sheath.
EE Taft, that is some real good stamping and some excellent dye work. I love that two two look; Kid Terico has also done some real nice "Eye Candy" holsters
All of you guys are inspiring! JD
-
Those holsters really look good, JD. Very nice use of that stamp. Very nice work on the stitching. The spots work nicely. Both look good so I wouldn't be able to choose a favorite.
That sheath looks very good, Slick. The tooling is good. very suitable for the holsters. Nice.
EE, those holsters are going to be very nice. Looking forward to the finished pics.
Good looking holster, HB. Very nice, finished work.
-
Thanks for the kind words y'all.
Can't slow down none, Slick.
I'll get all the sleep I need when I'm dead. ;D
Good lookin' set there, Pard.
~EE Taft~
-
Good lookin stuff guys! You need to get Helda over here now, so I cant just say "guys" ;)
DM
-
MHB I failed to mention that your black holster looked real good. JD
-
Thanks M.Will, I'm on tract,full of energy and trying to keep up with EET.
I have a sheath on the drawing board,glad I took Mech. drawing in school, sure helps.
Now where did I put my glasses. 8) oh, here on my face. ;D
MS
-
JD, yer did some serious creations on that project, looks Great.
Kinda quiet on here...maybe this will wake y'all up.
Made this fer me Sidekick 3 yrs. ago, he wanted a home fer his new knife, after all, hes my sidekick.
http://gallery.photo.net/photo/6951224-md.jpg
click to get pik, sorry bout that...left finger click once, on the mouse. Yup, right there, one click only. ;D
MS 8)
-
Slick, Great work on that sheath.
Very nice!!! ;D
~EE Taft~
-
Boy howdy, I missed a whole bunch of great looking work! Gotta go rest my eyes. ::) :o :D ;)
-
Slick, that sidekick special is very nice. The concho is quite interesting. Good work.
-
Thanks EET, Bob and M.Will, many thanks.
Seems our Frins. and Sidekicks come first,it's the Cowboy way and "Code of the West."
I like doing things fer the Kids and Folks in need, makes me feel good ya know.
MS :)
-
Very nice sheath there Slick; ya definitely knew what you were doin with that one
-
Thank you JD, June is coming up awfull fast here, air ya ready?
MS
-
Slick, that is one mighty fine sheath. Very nice work.
-
Thank you GB, I took my time on it as it was a special order for the knife.
My sidekick gave me the measurements, said it fit perfectly when He got it.
I like the handle, I ferget what kind of wood it is, I'll ask him.
MS
-
Montana Slick made me a beauty black double rig with Lone Star conchos on the holsters. I wish I was smart enough to take pictures and post them.
-
You bet Slick. You ought to bring your irons & shoot with us. You also need to come out to the house and give me some tips on leatherworkin, seein as you're doin such nice workl
You can PM me with a response; don't want to clog up this thread :P
-
Boy that's purty! I always did like those sheaths with the loop on them,nice set right there..
-
Here it is Bro. Tex, just for you and the gang, yers is just like this one, but, yers is better.
(http://i120.photobucket.com/albums/o187/JakeHarlow/Blackbeauty.jpg)
Got the template made taday Tex, I think ya might like it. The tempplate of course. ::)
Leather fer thought
MS
-
Hey Slick hear is my verson of the black cayon rig added a cross draw photos arnt to good but hope you can make it out
-
MHB, that is a mighty fine rig. I like the conchos and especialy the winged star very nice touch.
Montana, I see why the Lawdog is braging. He's got good reason to. mighty nice rig.
-
Thanks Rick, glad ya like our sheaths, I have a 7 1/2 "er on the drawing board, not sure what I'm gonna do with it yet.
MHB, down right thinkin' there with the cross draw and the double eagles look great, I like those and the morgan s.dollars are a real compliment.
Yer did good there MBH, ol Will G. would be proud of ya too. ;)
MS
-
Verry nice work there oldtimers ;D
Here I´ve made someting useful for us leathersmiths, a visit/creditcard holder.
-
Boothill Bob thats some very nice work your putting out. Keep it up. KT
-
Nice job BhB. Can I ask what you used to mold that inside piece that holds the cards?
-
JD, its 1.2mm oiled leather.
-
Very nice BHB, yer tooling is awesome, nice design too.
I'm still a hand stitcher, belt liners? Off to the shoe shop. ;D
MS
-
I'm a hand stitcher to MS, its about a 1000 stitches on a belt. I'm gettin elephantskin on my hands soon ;D
-
Howdy BHB
Nice card case.
WC
-
MS, I thinkin' about having you come to Missouri to help me stitch up some belts. ;D
It takes lot of time, but it worth it.
~EE Taft~
-
Boy that's pretty sneaky there...We'll have to change your alias to the Sneaky Swede :D Dang nice card holder....i want one now.. ;D
-
Boothill, that is some mighty fine work on that card case. Did you spend as much time as I think you did with a little fine paintbrush ;D
-
I like to brag on my Brother, Montana Slick. I am very proud of the work he did on my gunrig. My pistols are shiny stainless and they really set the rig off.
-
On a separate thread I asked about a simple Mexican loop pattern. I got a lot of helpful responses for which I am grateful. Needing a holster right away I took Will G’s Cattleman pattern, modified and enlarged it just a bit and slammed this out last night (that qualifies as slamming for me, Kid Terico would have made two of them plus a belt, lined and stamped at a minimum)
It’s not completely dry, and I will make several modifications on any further ones I might make. I needed a holster for the range tomorrow to give someone, but I was really short on time, so I did the least I could get away with on this one. Chuck Burrow’s DVD sure comes in handy as a refresher!
This will likely be the least fancy holster we see here for quite a while, but I believe it will be functional, which is what I needed.
(http://i165.photobucket.com/albums/u51/HarleyPastor/CroppedFirstMexicanLoop.jpg)
-
Looks dang nice to me JD, I think we forget just how nice a plain leather holster that's been built well can look, this one looks great in my book of looks. ::) ;D
tEN wOLVES :D
-
JD, I really like all the fancy rigs and they are truly works of art, but, that in my opinion is a first quality,truly cowboy holster.
Very nice sewing, very clean lines and very well executed work.
140 years ago you would have seen probably 200 of those and maybe one real fancy rig. That type of work is what this craft is all about. A wellmade and very functional tool. Not to be confused with a richmans toys, that holster is exactly what everyman would have wanted.
The examples that we have today are predominately the fancy rigs because no one used them very much. The rigs they used, the ones they counted on for their lives, were the ones like you have made.
I personally think that the beauty of an item has a lot more than just the outward appearance to stand up to. You have made a "tool" in its finest form.
-
Gun Butcher, you hit the nail on the head I think.
JD, great work in a short time!! Stitching looks good, design looks good. A+ in my book.
DM
-
JD, that is one fine looking holster. Like everyone says this is a working cowboy holster, great job. Just got the Chuck Burrows Frontier Holster DVD's and they are great.
AC
-
JD,
That is one mighty fine looking holster there!! Really well made and I like it a lot! ;D
-
JD thats a darn nice holster . You dont have to have it full of bells and whistles to make it nice nice piece of work. Very proud of you JD .. Terry
-
That'll work :)
-
Slick did you well, Tex. That's a nice lookin' rig. Good job, Slick.
HB, the cross draw looks good. Nice work.
Nice case, BB. It looks like it'll hold a decent number of cards. Cool.
JD, I agree fully with what GB said. That's a very fine holster that is meant to be used. It looks well made.
-
A++++JD A+
Here, have a corn dog, I'll share.
MSJr
-
Thanks Gentlemen, I appreciate the thumbs up. The main reason I built this was to do a Mexican loop for the first time, and to see how it fit for CAS. I learned a lot from this one, so I expect to see improvement on the next one.
I should have done that 2 needle one thread saddle stitch a long time ago! Once you get the hang of it, no problem, and the stitches look better than the method I was using, as least for how I was doing it. I've seen other guys work with different types of stitching that looks fine.
-
JD, I do the old saddle stitch, watch it tho,yer kind get yer seatmeat stitiched to the saddle very easily.
Here's a pik of me Cave, where great things are supposed to happen.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0114.jpg)
-
Good looking cave ther Slick. I wouldn't feel too comfortable there! Too neat and clean. :o ::) ;D
-
Howdy JD
You did a great job. Do not hang your head.
MS
That is a nice looking place to work, but it is way too clean.......
WC
-
;D Wasn't clean fer very long, ran outa room and had to expand to the next room. Has to share with my Wife tho she even keeps my cawffee mugg fulll.
Whata gal.
MS
ps, Anyone use hemp thread?
-
Cowboy Caves Rule!
Until ya have to dust the dang thiong,then ya shake your head and think~~~what in the hell is wrong with me~~~ ??? :o
-
Howdy Pards,
Here are some pictures of a single holster rig I just finished. The holster is a "Duke" style crossdraw with an oil finish (pigskin lined). The drop loop is attached with "T" nuts and screws and is moaca color to coordinate with the oil finsh. The belt is a tapered 2 1/2" wide belt as opposed to the standard money belt style normally associated with the Duke. The bullet loops are also color coordinated with the moaca color. Customer has not seen this yet so I hope he likes it.
-
As always Outridder your work is beautiful pard, and this is no exception, ::) :o 8)
tEN wOLVES :D
-
Howdy Outrider
That is one good lookin rig.
WC
-
Outridder great looking rig.. KT
-
Outrider, your work is the epitome of clean lines and workmanship. That rig is a real inspiration; thanks for posting the pictures.
-
Nice rig Outrider, easy on the eyes, :)
MS
-
Thanks for the kind words. I have kind of slacked off posting many of the projects that I have recently done....kind of redundant...from former work.
Hey WC,
I think I am going to do that 3 day shoot in Iowa in June...maybe you will be in Iowa then.
-
Hey Outrider, +1 for what JD said, that is a mightyfine looking rig
-
That rig looks great, Outrider. The contrast really sets it off. Nice work. That one should be really appreciated.
-
Outrider how slow I ve been recoperating why dont you take me with for target practice. I,m sure I,d feel better. ;D ;D ;D KT
-
Thanks for the kind words. I have kind of slacked off posting many of the projects that I have recently done....kind of redundant...from former work.
Hey WC,
I think I am going to do that 3 day shoot in Iowa in June...maybe you will be in Iowa then.
Howdy
I'm going to give it my best to be there. Just found out my folks are moving to Des Moines. That sucks.
WC
-
BHB you did a fine job on that case really good carving.
Montana, That is a mighty nice cave ya got there pard.
JD, ol GB said it all +1 for me pard very well done.
Outrider, you're a pro pard your craftmanship sets the bar high.
Here is my latest offering using a Will G pattern hope ya like them.
Wiley
-
Wiley, those are flat awesome!
-
Got a lot of catching up to do....
Howdy EE,
Beautiful job of stamping! Look forward to seeing the finished project.
Howdy Montana,
Great looking Rig! Beautiful job of carving! I sure like your Man Cave.
Howdy MHB,
Cool Black Canyon Rig! That black finish sure looks good!
Howdy BHB,
Excellent job on your Credit Card Holder! Beautiful job of carving!
Howdy JD,
Great job on the Mexican Loop Holster! It has a simple but classic look. My favorite style.
Howdy Outrider,
Beautiful job on the "Duke" rig! Mr. Wayne himself would be proud to wear it.
Howdy Wiley,
Excellent job on your Spur Straps! Nicely finished and decorated!
Many thanks to all of you Gents for sharing your fine work with us. Hope I didn't forget anyone. I'm in the mountains of Colorado skiing and have limited internet access.
-
Wiley...those straps are the cat's meow for sure...well done ...and yes I LIKE THEM
-
Wiley, them are some mighty fine straps they look great. That sombrero sets them off just right. Beautiful work Pard.
-
Thanks Johnny,glad ta see ya back on the thread again.
Wiley, I'm speechless, yes fer once in my life, speechless.
That is an Awesome, breath taking piece of art. I'm serious here, you did a great job on those straps.
My Brother, Evil Earl told me not to wear a sombreo in San Antonio, I'd look like a tourist.
You have good taste in color fer a hat.
Cawffee is on, fresh and ~~HOT~~ I share. :)
MS
-
Pards thanks so much for the kind remarks on the spur straps very much appreciated. Montana you get to San Antonio call me and we'll go eat some Mexican food but please don't wear a sombreo! ;D
Wiley
-
Wiley, Outrider,
Beautiful Work Pards!!
I seem to have many projects started but none completed.
I gotta get to work!! ;D
~EE Taft~
-
Wiley, I'll be coming to San Antonio this summer for the PBR and I plan on eatin' my share of Mexican food.
-
Boy Slick, I wasn't even awake this morning. That Evil Earl shot flew right over my head.
;D
TO THE CAVE!!!
-
Wiley, beautiful work pard, thems be good as BBQ straps. ::) :o 8)
tEN wOLVES ;D
-
I posted this holster a few days ago. Now I've made an equally beat-up belt. It's supposed to be one of the earlier, narrower belts from the 1870s. I aged the buckle with Birchwood Casey super blue and bleach. (Though the aging isn't very evident in the image.) I used a continuous thread for the loops as can just be seen in the back view. Skeet
-
Howdy Skeeter
Very nice pard, it looks great, and has the old but well kept look to it.
tEN wOLVES :D
-
Wiley, I love those spurstraps, U are a skilful leathersmith ;D
Skeeter, Is that the coffee holster??? It looks verry nice and authentic :o
-
Wiley,
WOW!! ;D GREAT spur straps! Totally awesome!! So much bling that I think you have been infected with a KT gene! ;D ;D ;D
Skeeter,
Excellent work on the belt. Wonderful looking rig!! ;D ;D ;D
-
WOW
Those are some good lookin straps.
WC
-
Willey and Skeeter, both are great. ;D
Just finished this Gamblers pushdagger.For the sheath, I made some simulated dice out of ivory and inlaid them.Dave
-
Dave thats what I call a great gamblers rig.Put that with the snake inlaid ace holster andu have it all. KT
-
Dave , HOW COOL is that, what a neat idea, the sheath and the knife are top notch. ::) :D ;D
tEN wOLVES :D
-
Howdy Dave
That is really nice lookin.
WC
-
Hey Skeet, nice job all the way around. I went back to see what else you posted lately, and the last holster was a double loop with the holster way past the flap; definitely not this holster. I made one and posted it last week, but I was in a big hurry. I'm gonna try it again and take a little more time and make a few mods from the first one.
Thanks for taking time to post some pics, I always appreciate the extra effort!
JD
-
;D GCR, here is some pics of your case, just PM me your address, and it will be on the way.
AC
-
Nice case AC, Rick should really like this.
tEN wOLVES :D
-
AC that is way cool ! :) :) It will work perfect...Initial and everything,thank you..
AC made this for my little video recorder,it's called a flip HD video recorder and is made like a cellphone..
I still need some practice with it.
http://sharing.theflip.com/session/29a5c3217a35cb688ecfd5f64d5399ca/video/11637150
-
;D ;D ;D Rick, your very talented, nice video, your right it takes great video.
Glad you like the case,
AC
-
Howdy AC
Nice case. Good Job.
WC
-
Thanks TW and WC, it was a learning project and I was able to help Rick out with something he needed. Gettin some old indian beads in exchange. Can't wait.
AC
-
Nice AC and the flute and dance was very good on tha video recorder that Rick did.
Just finished up on the most part of my Sisters Check book.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0203.jpg)
-
AC great job on Ricks case.Nice as usual..KT
-
Montana, thats a real good job on that gift for your sister. She oughta be pleased with that.
Skeeter, that is a fine looking rig. it looks exactly right.
AC, good job on the case, that kind ain't easy to do at all.
-
Slim, real nice gift there Pard. When someone takes the time to make something instead of dropping a few bucks at a store it's always appreciated and valued a lot more. That is something she will keep and show off to her friends.
AC, once again you impress the heck out of me. It's just too bad you didn't start doing this years ago, 'cause you might have been a household name in the leather world by now!
JD
-
MS, you're turning out some nice pieces pard, your sister should really like that cover.
GCR, you really get down on that Flute pard, my better half and I enjoyed listening and watching.
tEN wOLVES :D
-
Thanks TW,JD, and GB, glad y'all liked it, form what yer say, my Sis will too.
Yer right, it has to be a gift but for her other half....It's deep wallet time. ;D ::)
MS
-
Okay, I know its another pair of spur straps, but they don't take much leather and I am getting more practice out of a side that way. I got the conchos and spots from the King of Bling so I want to say thanks to the Kid.
Tell me what ya think. Is there hope for me or should I stick to butchering guns ??? ;) ;D
-
Very nice, GB. How did you cut the scallop shapes on the round strap-end? If with a punch, which one?
-
Those are awsome GB,very awsome..Never seen a pair with steerheads like that. Money makers right there..
-
Rick, thanks friend, I was hoping someone would be able to recognize what kind of animal it was ;) ;D
Skeeter, the scallops were made with a regular punch with one side ground off. Got the idea from one of the Pards on here, can't remember which one. And thanks for the kind words.
-
GB, I really like those! Good original idea..
MS, nice work on that money spender!
DM
-
Well shoot, GB! I don't wear spurs, have only owned one pair in my life (cheap toy spurs with Gene Autry's name on 'em, 'bout 1947-'48 or before), and wouldn't consider using them on a horse.
I've never had a need for spur straps and usually thought folks were foolish to dandy them up as much as they do, but these? These I could get into as a regular thing. They just really caught my eye.
You done good on those.
-
GB, those straps look fantastic, good design, well done pard. ::)
tEN wOLVES :D
-
Dalton, Ten wolves, thanks a buch for your comments Pards. They mean a lot.
Forty Rod, I don't know what to say, you have left me speechless. Thank you.
-
Thanks for the kind words KT, JD, MS and GB. It was fun to make a gift for a friend. WOW! GB, The spur straps are top notch. I really like the design, and they look great on boots.
AZ
-
Dang i'm gonna have to start a collection of spur straps after seeing those.I have an old Hoppy scarf and the slide is like the steer on those straps.
-
GB,
Keep on doing leather! Please!!! ;D Great lookin straps! Ought to be a Univ. of Texas alum. who would spend BIG bucks for those!! ::) :o ;D
-
How many duckets for a pair in black,but leaving the steer head the original color??? ;D ;D i could get my own conchos. :)
-
Nice straps GB, I kaint wer em cuzz I walk pegeon toaded.
Long Horn eh, my Brothers favorite.
MS
-
GB, those are really fine spur straps. Nice job man, nice job.
-
How many duckets for a pair in black,but leaving the steer head the original color??? ;D ;D i could get my own conchos. :)
I'm curious also...except exactly as you have them there. How much would something like that run me?
-
First of all thanks for all the kind remarks about those spur straps I showed about five pages back much appreciated pards.
Skeeter great lookin gun rig you put just the right amount of aging on that one. I would like to know more about how you aged that buckle.
AC, good job on that case pard.
Montana, your wife will enjoy that check book cover well done pard nice carving.
GB, beautiful design pard. I agree with Dr. Bob there should be a whole slew of folks over here at the UT campus that would part with some bucks for those spur straps.
WD
-
Howdy GB
Man those are sharp lookin.
WC
-
GB now thats FIRST class , great layout and design. I,m very proud of what u did with the spots and conchos. Thank You KT
-
Well, another learning experience here. I'm posting this for two reasons. #1 just to indicate I'm actually doing something leather wise, and #2 for an honest critique. The stamping is too busy IMO, but until you do something, it’s hard to know for sure, and I don’t mind the practice on all aspects of holster making.
I debated on what to do about attaching the body to the flap. I thought about a separate keeper strap, but for some reason that escapes me now decided against it. I laid a pre-cut strap down to get an idea of the shape I wanted for the loop. It looked good lying flat, but now so good now. It looks off centered to me; not a great deal, but a little.
On a positive note I'm fairly happy with the stitching and the main seam line, both of which have caused me problems in the past.
I was short on dye, so I mixed some dark brown with light brown and got mud! In this picture there is no oil or anything else. I dyed it last night.
Fire away!
(http://i165.photobucket.com/albums/u51/HarleyPastor/stampoedsingleloopcropped.jpg)
-
WOW!! thats All I can say.. There are some very talented folks here! I will figure out how to post a pic and put something of mine on here!!
It will take me all day to look thorugh 577 pages of your stuff! I do love those spur straps!! bEooootiuful!!!
-
Helda!!! Ya made it!
JD, I personally think that stamping is great. Not busy at all. Just looks like a little bit of lace.
Color wise, oil it up, and it will look good.
Strap wise, I agree. It seems a little offcenter. Maybe if the point was a little more aligned towards the barrel?
Good work!
DM
-
Thanks Dalton!!
http://i91.photobucket.com/albums/k282/Nihla/leather/nihlasbag2001.jpg
See if this works.. I couldn't figure out any other way..
-
Ms. Helda Darlin' has found us..YEEEEHHHAAAA welcome Darlin'. :-*
Yer out did yerself JD, kin I get some lessons from Ya Pard?
MS
Heldas moovie star. 8)
-
Wow Helda, that is fantastic work! Let's see some more :D
Dalton, I'm not exactly sure how to line one of thse out so it looks right once the gun is in it. I guess I will mess with another one, a lefty to to make a pair see if I can get it right next time.
Dalton & Slick, thanks for the comments, JD
-
JD, IMHO the stamping looks just right. You have good clean lines on the holster and it looks like it was well thought out. As far as he color goes I like it. Now if you want to see mud ya oughta see some of mine that I am to ashamed to even throw away :o :-[ :-X I gotta be honest with you centering that type of strap is what has kept me from making that style.
Miss Helda, I would go blind trying to lay down that pattern :o ;) ;D Beautiful work
Thanks to you all for you comments on the straps. I do appreciate them.
-
Howdy JD
Nice job, the stamping is not too busy.
Helda
Very nice job. Good stamping and filigree work.
WC
-
Howdy All
Just finished this for a customer. Still working on his saddle scabbard.
WC
-
Another shot
WC
-
Nice work on the holster JD, Your holsters are looking great.
Helda, Welcome our forum, we're happy to have you join in with us, you have done some beautiful work, the bag is beautiful, that had to have taken hours to do, thanks for sharing.
Nice work WC, as always
Regards
tEN wOLVES :D
-
Helda, Ya made it Gal!!!!
Now yer gonna be on the computer all the time instead of half the time.
Beautiful work on the purse.
GB beautiful straps.
WC great gun belt.
JD, Don't doubt yourself. Your doing some fantastic work!
~EE Taft~
-
JD, thets a fantastic holster, lover the color and the style.. Keep it up 8)
Welcome Helda, it´s nice to meet U :D
-
WC, neat clean sewing, good honest lines and it sets that pistol off perfectly. Great work.
-
WC, that rig is SCARY Clean!
That is a level of cutting, sewing & dying I can’t even imagine being at.
Thanks for sharing those great photos.
Can you tell me how that strap is attached in the back? I'm still trying to work out the best way to do that aspect of building a holster. I like that look. Would it be considered a "Spaghetti Western" ?
Thanks,JD
-
Howdy Helda beautiful leatherwork.
JD, Good job pard. 100 years from now those little things you think are mistakes will make it a priceless hierloom. Stay with it pard you got it going your way.
WC, you the man pard, great leatherwork.
Wiley
-
WC, that rig is SCARY Clean!
That is a level of cutting, sewing & dying I can’t even imagine being at.
Thanks for sharing those great photos.
Can you tell me how that strap is attached in the back? I'm still trying to work out the best way to do that aspect of building a holster. I like that look. Would it be considered a "Spaghetti Western" ?
Thanks,JD
Howdy JD
Thank you for the kind words.
I di not dye it. I use a black dbl shoulder from Tandy. Nice hide.
The strap is just run through 2 bag punch slots in the skirt. One on each side of the holster.
WC
-
Howdy All
Thank you for the kind words on the black rig. I normally don't like to do plain rigs but I like this one.
WC
-
I learn so much from this forum, and so much from you WC, it is so cool. I did not know Tandy had such things, and it is indeed a nice piece of leather. Since you make the strap, I assume you just pull it through to where to you it, then cut and punch accordingly I am going to have to give that a try. Thanks for that explaination. JD
-
That's how I did it JD
WC
-
Theres some mighty fine leather appearing on my screen.
Nice work WC and Ms. Helda Darlin'. Thanks fer the piks, y'all do us proud.
MS
-
For a no frills no carving holster, that looks darn good!
DM
-
Here I´ve made a Wes Hardin holster in crossdraw model, but I think its a little to slim..
It was fun to make.. ;D
-
Very nice BHB, it looks good
tEN wOLVES
-
Howdy BHB
That looks just perfict.
WC
-
Boothill that don't look to slim to me. I really like the slim clean look of that one. My favorite style.
-
Well Bob, if the gun fits in the holster, it's not too slim, in my opinion. I love the look and the bullet loops are a great idea.
-
BHB.
I agree! Looks good to me! ;D
-
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_101_0807.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=101_0807.jpg)
This is supposed to be belt.. And a clickable thumbnail.
-
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_100_1092-1.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=100_1092-1.jpg)
Another gunbelt.. A wide back belt...
-
(http://i91.photobucket.com/albums/k282/Nihla/th_102_1361.jpg) (http://s91.photobucket.com/albums/k282/Nihla/?action=view¤t=102_1361.jpg)
And a framable buckle background.
-
Nice holster Bob, nice and clean and easy on the eyes.
Ms.. Helda Darlin, yer kin do roses fer me anytime. AWESOME
MS
PS, just caught yer belt, I better get busy and lern the trade, I'm way behind the times.
Yer kin post faster then I kin kiss a duck. 8)
-
I love that belt style in the leather!!!
:o :o What the!! :-* :-* :-* :-* :-*----------Wack wack wack wack----------->
-
Helda, I found me specks and saw yer sunrise beveling and the buckle frame is out of this world.
Thanks Darlin', yer taught this rookie a lot here .
MS
-
HH some beautiful work on the items your showing. KT
-
Wow Helda, beautiful work. Your coloring is outstanding. Thanks for sharing those great pictures, JD
-
Howdy Helda
That is a beautiful belt, and that rose is a knock out, you'll have JD drooling, on this one, thanks for the look see.
tEN wOLVES ;D
-
I wasn't even going to bring up the roses I carved for that guitar strap! Between Helda and Sandi, I need to crawl in a corner!
-
Thanks Guys.. That was my first rose and the first coloring I ever did. I also antiqued it after I colored it ... so it took some of the color off of it.. I think it was a good accident! :-*
-
My compliments to everyone for all of the fine work posted in the last week. A genuine pleasure to view!
Many thanks to you Ladies and Gents for sharing with us.
I'm still in the mountains of Colorado skiing.
-
Johnny you lucky pard you, lets see some pictures of you on the slopes, that's the least you can do for us, post them in BUNK HOUSE RAMBLINGS.
tEN wOLVES ;D
-
Howdy Helda
You do wonderful work.
WC
-
Helda, I like the soft color of yer rose, easy on the eyes. Thanks for sharing.
Yer MS
-
Howdy All
Here is the scabbard to go witht he black rig I just finished.
WC
-
Close up
-
Very nice work as usual, WC.
DM
-
I sure like that vinageroon black. :)Nice scabbard~
-
Howdy GCR
Not vinageroon. Drum dyed from the factory.
WC
-
Nice work WC, that pard is going in style. ::) 8)
tEN wOLVES :D
-
Rifle scabbard looks great WC! Hope to get to see it in person!
-
WC, that is some top shelf work right there. Mighty fine.
-
Outstanding WC, You inspired me to get some of that leather today. Bought a double shoulder from Tandy. I haven't got any vinagroon made and want to do a Black Buskadero bling rig soon. Seems to tool OK if you get it real wet first then let it case. Some day I hope to take a trip to your part of the woods and see your shop.
Ladies and gents, some fine work going on out there, keep it up.
AC
-
Sure looked like that black holster you did.
-
Nice WC, I hasta try that drum dyed leather on my next black project.
MS
-
Outstanding WC, You inspired me to get some of that leather today. Bought a double shoulder from Tandy. I haven't got any vinagroon made and want to do a Black Buskadero bling rig soon. Seems to tool OK if you get it real wet first then let it case. Some day I hope to take a trip to your part of the woods and see your shop.
Ladies and gents, some fine work going on out there, keep it up.
AC
Howdy AC
Thanks for the kind words.
I hope you can get over this way too. Would like to meet you.
WC
-
Sure looked like that black holster you did.
Howdy GCR
The rig was made from the same hide.
WC
-
Howdy All
Thank you for all the kind words.
On to the next project.
I have a little time before the next job has to be done so maybe I can get some work done on the filigree gunbelt.
WC
-
Congratulations to all for the talented work.
Helda, nice frameable buckle. What backgrounder did you use? It's a nice stipple effect.
-
That customer of yours ought to be one happy camper when he sees that scabbard matching the excellent six gun rig. I don’t think it gets any better than that. Thanks for sharing the pics WC
-
WC, what a great combination of beautiful leatherwork the gun rig and the rifle scabbard, very nice pard.
Well, I pluged my newly acquired Chuck Burrow's DVD in the TV in the ol leather shop and while I was watching it I made this rig. The holsters are my design using "Packing Iron" as a reference. The gun belt is a Will Ghromley pattern. I hope you can see the Chuck Burrow's influence here. ;D
Wiley
-
Wiley Chuck will be proud of you I'm sure, beautiful job pard, I like your border work, the color looks great, and those holsters are really nice, well done pard,
tEN wOLVES ;D
-
Great work, Wiley. Keep it up. Skeet
-
Howdy Wiley
That is real nice work. Keep it up.
WC
-
TW, Skeeter and WC thanks for the kind remarks much appreciated pards.
WD ;D
-
:o Wiley, dang, ya made me spill my Cawffe, fell outa me chair and almost fainted. ;D
That rig is the best I''ve seen in many moons and the color is my favorite, not only easy on the eyes, but AWESOME
Yer needs to take that pik and frame it on yer Wall of Fame.
Thanks fer sharing,
MS
-
Wiley, once in a while you Texas boys really do have something to blow your horn about ::) ;) ;D
And this is one of those times. Great looking rig Pard.
-
Wiley thats some pretty nice leather work your showing.. Keep it up. KT
-
Great job Wiley, the rig is top notch.
AC
-
Hey you cowboys really know how to make an ol fella feel good about their leather work thanks for all the kind remark very much appreciated. ;D
Wiley
-
Wiley, I'll add my name to the list of admirers of your work. I like that a whole bunch, color and everything. The belt does look like one of Will's, which surely is a compliment.
Are those loops sewn or woven, or???
Thanks for sharing your work, JD
-
JD, thanks pard, those loops are woven.
WD
-
I agree Wiley those are very authentic looking.
Here is a pair of cross draws I made last winter for Rico Star. they are very plain so he can add conchos to it .. the belt matches them but you can't see the belt in the pict.
[Dead link deleted by moderator]
-
Howdy Helda
Those are some dandy holsters, and I can see how they would work well for mounted shooting. Thanks for the look see, I take it you're a mounted shooter too, that must be a ton of fun. ;D
tEN wOLVES :D
-
Howdy Helda
Very nice work.
WC
-
Well, I pluged my newly acquired Chuck Burrow's DVD in the TV in the ol leather shop and while I was watching it I made this rig. The holsters are my design using "Packing Iron" as a reference. The gun belt is a Will Ghromley pattern. I hope you can see the Chuck Burrow's influence here. ;D
Wiley
YOU'RE HIRED!!!! ;D ;D ;D
-
I was gonna post a pik, but I kant take my eyes off of Helda's holsters and saddle.
Nice, very nice Helda.
MS
-
Helda, those are my idea of great CAS holtsers, mounted or otherwise. I like the shape, drop color, lacing, well, everything actually!
-
Howdy Pardners, First time postin here so please be kind. I have been workin my way through the pages here and only have about 300 more to go. The work and quality is amazing. I just finished my first SAS holster, visited a local club and lookin to sign-up. Don't have an alias yet, workin on it. Too much to do, too little time to do it. Anyway, here is my first holster, believe it or not, was supposed to be light tan, too much dye I guess. Anyway, I think I like it better. Now just 1 more holster, gun belt, ammo belt, cuffs etc... Gonna be at it a while.
Up to now, Thanks for all the pics and tips.
This holster is from the How-To by Brazos Jack.
Rat
-
Welcome to the fire Rat, hey, nice looking holsters, yer did great.
Holsters in review here...
Her's my first try at a 1858 a few years ago, aint got much better but I try.
(http://i120.photobucket.com/albums/o187/JakeHarlow/Hals1858nholster.jpg)
MS
from MT
-
http://s91.photobucket.com/albums/k282/Nihla/?action=view¤t=102_1367.jpg
This one is for you MS Mooovie Star!
This is a Keystone saddlery saddle made by a William Haas who apprenticed there and at Bohlin.
-
:o It's an eye catcher Ms. Helda Darlin, Thanks fer the pik of an awesome saddle.
It looks like it would fit Ol Bill, he's my horsey ya know, a Red Dunn
By the way, I noticed the chaps, I like em, but up here in Montana we dunt wear em, but I'm gonna make em up one day.
Just fer show.
Thanks Helda, yer a Gem of a Lady.
Yer MS
-
Howdy Rat
Looks like you got skipped over, Welcome to the Leather Shop, were happy to have you join in with us, for a first holster , you did dang good, and your next two projects will be even more fun now that you've got your feet wet, with everything you make you will hone your skills, this leather crafting is addictive to say the least, don't forget to post your pictures.
Here's my first holster, I made it in 1956 or 57, a long time ago when I was a kid, it's not near as nice as yours, but it has good memories for me, so make sure you keep the first rig you make, it will be special as time goes by.
Regards
tEN wOLVES :D
-
OOPs Sorry Rat.. Hey thats a great First Holster!! I like your borders.. and MS I love the black one too!! Very Nice.
Ten Wolves, Thanks for the compliments, and you are soooooo right.. leather crafting is addictive!
-
Helda it sure is, leather seems to get under your skin real easy, and by the way it's nice having you with us, if I haven't already said that, and Slick your first Slim Jim is beautiful, you did a great job, thanks for the look see. ::)
tEN wOLVES :D
-
Thanks Ten Wolves. I am having a great time here. I love seeing all the projects and picts.. I am sill looking through the pages like Rat is.
-
TW you had a knack for it way back then. ;) KT
-
Helda and Rat great work
-
MontanaSlick
dont be so hard on yourself. your first holsters looks great and the gun fits in it well.
my first holster was terrible. tried to make one for my secuirty six 357 and wouldn't fit. i couldn't even get my dad's ruger single six 22 revolver in the darn holster. got upset and tossed it in the fire. was so mad at it. looking back i wish i wouldave tossed it into the oops box instead.. :'( :'(
its good to keep the first holster. ;D
and everyone here sure has improved on their projects to some degree since i have seen so many made.
we all share info and some of it does get into my brain so i can adjust fire when needed and drive on.
thanks to all on here that shares info
-
Good lookin stuff folks!
Rat, very nice first try! My first is on here somewhere, but I aint gonna point it out..... :-[
And welcome to CASCity and the Leather Shop! Feel free to chime in if ya gots questions?
DM
-
Thanks KH, it's compliments like yer that makes it all worth while.
My old knife sheath, it's here somewhere.
(http://i120.photobucket.com/albums/o187/JakeHarlow/TBsheath.jpg)
I loose more sheaths, must be in a box somewhere.
MS
-
Howdy All
Some nice looking work being put out by new and old.
Keep it up.
WC
-
Wow! Thanks for all the kind words, can't wait, laying out the next holster now.
Hope in a few years to start gettin good at this, it is fun.
Rat
-
There is no way that I could name all the AWESOME leather that has been posted on here, so I just wanted to let you all know Keep Up The AWESOME Work!
Later
ACE
-
Ace, ya dunt do so bad yerself, good ta see ya back Pard.
MS
Somewhere in the middle of nowhere. 8)
-
Rat, very good looking first holster. And welcome.
Miss Helda, your work is always easy to look at.
Montana, yer doing great Pard.
Ace good to hear from you.
-
Thanks GB, gonna run out of things to do here soon.
Found my lost knife n' sheath, Sassy found it right where I left it. She's so smart. :-*
-
Hi folks....Dalton Masterson just sent me finished pics of the rig he made for me and it is BEOOTIFUL!!!! I will let him put the pics up since its his creation but I am very very happy based of the photos he sent me......your up DM!!!
-
I havent been able to keep up so thank u all for the great leather work your showing . Keep it up. KT
-
Thanks NW Grizz. I will get the final details done, then post the complete critter.
I am glad you like it!
DM
-
I've got a rig I'm workin' on but not done yet. I hope to have it done in the next couple of days to post.
Lots of nice lookin' stuff on here lately.
Lots of new talent, too. Certainly a good thing for the craft.
~EE Taft~
-
Whoa! Let me catch up pards! First of all thanks Chuck.
Helda mighty fine cross draws!
Montana ya ol cowboy that black slim jim is a beauty pard.
Howdy Rat and welcome to the leathershop. Pard you did real good with that first time holster really nice leatherwork. Now we want to see more!
TW, you had talent comin out of the gate!
Hey would it be fun to start a post with everyones first holster? ;D
Wiley
-
A few more pics just for you ;D
[Dead link deleted by moderator]
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1372-1.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1372-1.jpg)
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1371-1.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1371-1.jpg)
These are hair on chinks and a woolie set of saddle bags.
If you were at EOT a couple of years ago you would of heard of little ho peep and her lost sheep.
hee hee.
-
:o I'm speechless Helda.
Yer MS 8)
-
Whoa! Let me catch up pards! First of all thanks Chuck.
Helda mighty fine cross draws!
Montana ya ol cowboy that black slim jim is a beauty pard.
Howdy Rat and welcome to the leathershop. Pard you did real good with that first time holster really nice leatherwork. Now we want to see more!
TW, you had talent comin out of the gate!
Hey would it be fun to start a post with everyones first holster? ;D
Wiley
Wiley, we have a thread around here some place, Ill have to see if I can dig it up. :-\ ::) ???
-
Helda girl, you are quite an artist, beautiful work, thanks for sharing. ::) :o 8)
tEN wOLVES :D
-
Helda, thats some verry nice work u have done there :-)
-
Helda,
Those are beautiful!
~EE Taft~ ;D
-
Dang Helda, I have always been a bit scared to try carvin on leather, looking at your work sure don't make it any easier! Beautiful work!! Keep em commin!
Rat
-
Aww shucks... ::), You guys are the best and I am learning stuff right and left in here. Lets just say I have a tendency to jump in with both mule feet. ;D
-
You've shown us some very nice work Helda. This is an area I've not ventured into, but I can see from the pics that you've jumped in with both feet. Thanks for the pictures, JD
-
Nice work!!! My wife wants wooly chaps, but I cant find a good wild wooly around these parts. I suppose I will have to get a domestic wooly sometime.
10W, I think I started that thread awhile back, if your still looking.
DM
-
Finally got some thing done . KT
-
Nice work KT, Love the color. Does they fit 5 1/5" or is it 7 1/2?
-
WOW, very nice KT! I like 'em alot.
Course my favorite style of holsters is the Slim Jim.
Ned
-
Thanks Boothill Bob and Ned. They fit a 71/2 KT
-
If I could make this computer whistle, I would. Those look great!
DM
-
Here is my newest work, its a dayplanner cover for my Wife, I wonder what she will give me :D
-
BB very nice job and I hear she is going to give u cold shoulder and hot tongue. ;) :D ;D ;D KT
-
That's a nice wide belt on that rig KT,i love the design!
-
Howdy KT,
This rig is beautiful, what a classy look it has, your tooling is always great, and this is no exception, the limited use of spots makes it really look period, and antiqued, the wider belt will also accommodate two large revolvers very well, the color you chose is nice and rich looking, this is a rig that could have been worn by a famous Marshal or Lawman, or wealthy Rancher.
Just as a side note, I was told years ago by an old timer that spots were used back in the day to protect the leather from getting scuffed and tore up, and they did a good job of that, and then the use of spots became useful not only as protection, but ornamental too. I thought you would get a kick out of this Kid. ;D
Ten Wolves :D ;D
Boothill Bob,
Nice day planner, your wife should be very happy, and if your lucky she might make you dinner..... ;D :D ;D :D ;D ;D ;D
tEN wOLVES :D ;D ;D ;D ;D
-
KT, which brown dye is that? Med.? Or is it a natural dye?
-
I'll be darn TW~I knew them spots were for somethin usefull,that splanes it... :)
-
Well, well, well.
Been a long time since I was able to spend any time over here. Been a lot of super work posted since then. Congrats to all.
Thought I'd share a couple of Slim Jims (8" Remmies) I just finished up for a pard. Been the first work I've had time to do for darn near all winter.
Anyway:
(http://img.villagephotos.com/p/2005-5/1013589/Small%20copy%20for%20web.jpg)
-
Good to see you back Dave!
Those look really classy.
Bob, thats a very nice dayplanner too.
DM
-
Beoootiful KT and I love those slim Jims Irish! I love the color of the leather.. :D
BB.. I bet you are "penciled" in here and there in the new day planner :-* very nice!
-
KT
Good lookin rig as always. Glad you're feeling better.
BHB
Great job.
Dave
Good lookin Holster.
WC
-
TW thanks for the info. I am not very big so I put lots of spots on so the wind dont blow me over. ;D ;D ;D KT
-
Santee the dye is a mixture of Dk. Brown, Lite brown, Chocolate and black with a little red KT
-
Well, well, well.
Been a long time since I was able to spend any time over here. Been a lot of super work posted since then. Congrats to all.
Thought I'd share a couple of Slim Jims (8" Remmies) I just finished up for a pard. Been the first work I've had time to do for darn near all winter.
Anyway:
(http://img.villagephotos.com/p/2005-5/1013589/Small%20copy%20for%20web.jpg)
Ssssssswwwweeeeeeeeeet!
-
KT, I hope you are feeling better!!! That rig is SWEET!! I like it!!!!!
BB, Super nice looking carving, I hope to get back to practice on my carving this summer!
Irish Dave, Killer Slim Jim, I realy like that pattern!
Keep up the AWESOME work!!
ACE
-
Irish, I always like the leather you post. They look authentic. Skeet
-
Thanks to everyone for the nice comments. KT
-
Kid, As always that is some beautiful work. You continue to impress me.
Boothill Bob, that si some really nice carving. that oughta get you a few attaboys. ;)
Irish Dave very clean looking rigs. I love the lines.
-
Irish Dave, top of the evening to ya.
As always your work is beautiful, and these are too, thanks for the look see, and be a stranger, we miss you around here.
tEN wOLVES :D
-
Much obliged, pards (and pardettes) for the kind words. Haven't meant to be a stranger, just had my hands full with lots of stuff that's kept me away from the workbench.
Hopefully, I'll have more time 'afore long and can post regularly again one of these days.
As I said earlier, lots of outstanding work been posted here since I visited last. Hats off to all you folks.
I do miss this place. Damn fine buch of talented folks hereabouts.
-
KT, what a great looking rig! If I remember correctly it's a bit rare for you to do an unlined rig. I think it's a good idea for you NOT to line one considering how much sewing it requires, and what all you've been through. That color Rocks, along with the stamping and and other embellishments makes for a very cool set up. I'm really glad you're feeling up to doing anything at all. Like I said on another post, you're a tough old bird, and we can argue the old part ;D
BhB, what a nice gift for the wife. Your carving looks great.
Irish Dave, them's some sweet lookin holsters for sure. That's a pro job if I've ever seen one. Good to see you posting again.
Nice work everyone, JD
-
Let's see if I can get all these straight..... :D
Wiley, great spur straps. Just the right amount of glitz.
Skeet, that's a mighty fine belt you made to go with the holster. It makes a fine rig.
Dave, nice work on the push dagger and sheath. The inlaid dice is a very good look.
AC, that's a really good-looking case you made for Rick. Great color and workmanship.
Slick, beautiful checkbook. Your sister will be proud to pull that one out.
GB, those spur straps are beyond cool. The longhorns on them are great!
JD, that holster is very good. The stamping on it looks balanced and appropriate. Nice work.
WC, that black rig is really good. I like the little bit of decoration on the buckle. It's a nice accent.
BH, that holster with the bullet loops on it looks just fine. I like the looong look.
Helda, that rose belt is truly beautiful. Very nice coloring job. The other pieces are also very fine work. Welcome to the forum.
Wow, ten more pages to go. This is great fun!
WC, the scabbard came out great. The guy should be very happy with those.
Wiley, that rig is beautiful. It looks historically accurate. You do Chuck proud with that one.
Cool crossdraws, Helda. The two-tone with spots is a good look.
Welcome, Rat. That holster is really nice. Good work on it. Looking forward to more of your stuff. Welcome.
Slick, that black Slim Jim is a good one. Nice work, just the right border on it.
TW, it's cool to see your first rig. I don't have mine, it walked off one night. I may have the 3rd or 4th but there's only one 1st.
Slick, it's fun to see some of your first stuff, too. Thanks.
More cool stuff, Helda. Those wooly saddlebags are most interesting.
KT, that rig is beautiful. I love the dark brown. Good choice for it.
Nice daytimer, BH. Your wife is a lucky one. Great finish.
Beautiful Slim Jims, Dave. Those really look like they came down the time line.
Well, I made it. There is some very wonderful work showing. Ace says it right: Awsome!.
-
My first pair of Chaps. All hand sewn including the zippers. WC helped me with them. Although it was probably not what I was saying at the time, if I make another pair, oops when I make another pair I will probably hand sew them also.
-
Nice chaps, it's refreshing to see some hand stitching
Thanks M. Will
MS.
-
KT, that rig is a bit of a departure for you but I love it, looks very period.Annie ,those chaps are awesome ,great job.Dave :)
-
Goodtime Annie you do absolutely great work. ;) KT
-
Annie, your chaps look great, there's a lot of hand work in this one, but it paid off, thanks for the look see, and it's wonderful to have you joining in with us, and becoming part of our family here in the Leather Shop.
tEN wOLVES ;D
-
Those chaps are really nice, Annie. The handwork was certainly worth the effort. Thanks for the pics. It's good to see you with us, for sure.
-
Howdy
You worked hard on those chaps Annie. It paid off.
WC
-
Annie, I see alot of sore fingers in that job but well worth the effort. You did real good on those. Do the legs close with zippers?
-
Annie,
I have to agree with the other pards on here, Super Nice looking Chaps!
You have a great teacher!
Keep the AWESOME work!
ACE
-
Helda, absolutely beautiful leatherwork. Those saddle bags are great! I have never made a pair of chaps they look a little intimidating to me...might try it someday.
KT, pard I am going to frame a picture of that rig you just posted right over my work bench and if I can ever get my carving to look that good...well I'll consider I have arrived.
BHB, looks like your scored some points with that day planner, very nicely done pard.
Annie, you are one of my new hero's looks like none of this leatherwork stuff scares you. very good job on those chaps.
Irish Dave, been wondering where you got off to ol pard. Those are some mighty fine lookin slim jims...class act for sure.
Wiley
-
Yes the chaps have zippers in them. I put the first one in wrong, had to take it out and change that so that was like hand sewing in 3 zippers! Mistakes will teach you!
-
Wow Annie, those chaps are really something. You did a great job, and I love the color. It's so true that experience is the best teacher.
I made a second Mexican loop holster (left handed) to go with the first one. I made them about three weeks apart, and had to use different leather, because I'm burning up the scraps more or less. The second one came out darker even using the exact same dye mix. The second piece of leather was not nearly as nice as the first, especially the back.
I still didn’t get the loop portion adjusted to center and that aggravates me. I centered it when the leather was flat, so I will have to mess more with than, or just make them straight!
I will make a belt to match and give them to one of the new guys at the range to use until they can afford a nicer rig. After that they will be used a loaners for our monthly range orientation.
(http://i165.photobucket.com/albums/u51/HarleyPastor/2mexicanloopholsterscropped.jpg) (http://s165.photobucket.com/albums/u51/HarleyPastor/?action=view¤t=2mexicanloopholsterscropped.jpg)
-
Looking good JD,I'm sure they will get a lot of use.
-
Pretty Annie!! I can't imagine hand sewing all of that!!
JD. Those look Maaaaaveloous!! :o
-
JD, That's a good lookin' set of holsters, Pard.
Nice look with the tooling and I like the color.
~EE Taft~
-
Nice chaps Annie!
JD, very good work on the holsters. Give them a few years, and the mismatch of color wont be noticable.
They look good!
DM
-
Dunt mess with them JD, I didn't notice it till ya mentioned it.
If anything put a couple of conchos on the straps, might fine look holsters and the color is a great match.
Leather will do that fer ya,they have their own personality.
Keep up the good work Pards, love yer leather.
MS
-
Howdy JD,
I think your Mexican loop holsters LOOK AWESOME!!!! I my self will never make any more! I am going to stay making the holsters i like, and do some other leather goods when I can! I still can't figure out how to get that rich aged look that C.B. get with his leather ??? ??? I have a few more things to try, and maybe and then maybe not!!
Your Holsters look Great!
Later
ACE
-
hear is the Will Gh holster i been worken on i havent made strap for fornt yet but hear it is
-
MHB,
It's a beaut! Love the color. ;D ;D ;D
-
J.D Really like the holsters,they came out great,Annie love those chaps,great job. :o Feathers
-
Howdy MHB
Good lookin holster.
WC
-
Nice MHB, nice work.
Bro. Dr. Bob, My Brother :oTexas Lawdog got his knife sheath today, haven't posted it till he got it.
It's a Surprise.
Here it is.
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0211.jpg) (http://s120.photobucket.com/albums/o187/JakeHarlow/?action=view¤t=DSCF0211.jpg)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0206.jpg) (http://s120.photobucket.com/albums/o187/JakeHarlow/?action=view¤t=DSCF0206.jpg)
No bone fer Victoria. Shes gonna bite me fer sure. :o
-
Howdy MS
That is a sweet lookin sheath.
WC
-
+1 I'm sure he's tickled PINK!!!
-
Y'all are postin' faster that I can look!
Nice work all around pards...holsters, chaps, sheaths ...all daisies in my book.
-
Thank you WC, Dr. Bob , MHB and Irish Dave
Bro. Tex got his leather today....Hez a Grinnin'.
Started on my gun belt to day, all carved and tooled is my goal.
MS
-
Kewel stuff :)
-
Grat work on that sheath Montana. Can't wait to see your new gun belt.
-
Thanks for the positive comments everyone, I do appreciate it.
Slick, I agree that conchos would have worked good, but I can't go backwards on these. You did a good job on that sheath pard.
MHB, good job on that holster; I really like the color.
-
Hey Folks,
Don't have time to stop and chat, but I figured I'd shout out as I ran by. My second oldest daughter and her new South African husband are flyin' in this afternoon. Anita has been a missionary in SA for the last five years and this marks the first time we will have seen her in three. The couple will stay with us for two years, earning money to head back to their mission field. So, I've spent the last three weeks gettin' a room ready for 'em. I've been busier than a one-legged man in a politician kickin' contest.
Anyway, I just finished a Main and Winchester inspired holster for a guy's '51 Navy. I took some photos, and I liked the looks of my own '51 so much, I figured I'd post a photo. Only, I couldn't get the photo small enough for the site to take it, so here is a link to a web page: http://www.willghormley-maker.com/Photos.html
Also, I finally got the first shipment of the new Jesse James/Hand of God buckles. I ordered 'em in brass, white bronze, nickeled, and silver. Haven't had a chance to really sit down and look at 'em closely, but a quick inspection looked real good. When I have a little time in the next week, I'll sit down and price 'em out and post photos.
Take care, the countryside is crawlin' with rouges and rascals, stealing our liberties and helpin' themselves to our hard earned wages. Tend to your own defenses.
Will
-
Nice work Montans.... ;D
Here I´ve made my first Inverted Carving, it was fun :)
-
You are the king of the kings Will, love the color of that holster.. I´m looking forward to bye the hand of god pattern
when its out for sale..
Best Regards//Boothill Bob
-
Hello Will, it's good to hear from you. Those newest pictures do a great job of illustrating your skills as a designer and leather worker. As always your work is inspiring.
I know how I would feel if I hadn't seen my daughter in three years, and it's great that you are providing space for them to live while they work towards their ultimate goal of returning to the mission field. Colossians 3:17 comes to mind.
God bless, JD
-
Howdy Will love the 51 holster its funny i just posted one of your 51 holsters i just finished up your the master of lether love your stuff let us know when you get the Charley Prince rig in pattern form it will be first on my list when it comes out
Missouri Half Breed
-
Howdy BB, Montanaslick, and Mr. Will,
Mighty fine looking leather gear you all have made!!!!!! AWESOME!! Mr. Will you know how I feel about your work!!
Later
ACE
-
Well now, Will, that would look just great with my 1860 Colts. Maybe I'll get off my duff and do something about it.
Thanks for a wonderful picture and for sharing your skills and talents. You're an inspiration to so many of us.
-
Howdy All
Great work all around, Slick, good looking sheath pard, and Will it's always good to see you posting, I'm happy for you, as I know the others are too that you will be seeing your daughter soon, that will be a great moment, that new Rig is awesome, and we'll look forwar to seeing those new buckles. BHB, nice Ruger carving pard, well done.
Regards
tEN wOLVES
-
Thanks for the up date and good news Will G.
B.Bob, Nice, real good werk there Pard, seems ya have a steady hand.
I'm w*rking on my gunbelt, will post the complete rig as soon as I get it all together.
MS
-
Bro. Slick did a fantastic job on the knife sheaths and my black 2 gun rig that he made for me. I am anxious to see his newest creation.
-
Bob, you really nailed the Ruger logo. Excellent work!!! ;D ;D ;D
-
Great looking holster Will. Your work always is!! Must have taken days to set all those spots on that belt! :o ::) ;D ;D
-
Came out real nice, Will.
Good job on the carving, Bob.
keep 'em coming guys!!
OOOOOOO new buckles!!! Can't wait.
-
Well been worken on one for my self after doing it i think a cross draw to match is in order this patterm was made by my brother Missouri Marshal, and a snip hear atuck there by me cant never leve nothen the way i get it so hear is what i came up with hope yall like it
-
MHB
Lookin Good.
WC
-
Fine work as always, Will. Authentic and clean.
Missouri, you're coming right along. Lookin' good.
-
Boothill Bob, I forgot to mention your EXCELLENT rendering of that Ruger Logo. That was good work!
MHB Excellent work as well. Man there are lots of guys crankin out good work here, it's hard to stay caught up!
-
Cant remeber if I posted Bro. Tex's knife sheath.
Thanks Tex, glad you like em, heres a pik
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0211.jpg)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0206.jpg)
Again Bro. Tex, thanks
Doc Slick
-
Nice holster, HB. Looks cool.
Beautiful sheath, Slick. Nice job.
Beautiful work, Will. That one looks great.
Very nice inverted carving, BH.
Good holster, HB. Lookin' good.
-
MHB, I sure enjoy lookin at those holsters, mighty fine
Ace of Spades, just my style.
MS,
Mt. Gambler, thats why the call me Slick :D
-
OOps, seems I missed a couple of pics.
Will, that is a beautiful rig and I know it will be great to see your daughter.
Bob, you did a really nice job on that inverted carving.
MHB,great looking rig. Your work is really coming along.
-
MSand HB some nice work.. KT
-
Half Breed,
Super Job, I Like The ACES ;D ;D
Keep up the good work
ACE
-
Thanks KT, how yer doing these days? Better we hope.
Aces hi MHB. ;D
-
This doesn't need any explanation as to what it is, but the basic design is from Slowhand Bob. I chose to use woven rather than sewn bullet loops. This is my first one, so once again there is a learning curve to get past, and once again I was in a hurry.
I made a badge holder for his dad, then he asked if I could make him one with bullet loops. I promised this to him by Saturday (always a bad idea) so I pushed it a little bit. It’s still drying from an app of EVOO, and I will apply some Skidmores this afternoon.
He has a 3 inch gun belt, so this will work out good. Anything less than that will produce a loser fit. I can’t make it any smaller and still get the badge and bullets on, unless I go with just two loops, or have one hang over the badge.
Thanks Bob for the great idea!
(http://i165.photobucket.com/albums/u51/HarleyPastor/bulletBadgecropped.jpg)
-
great badgeholder JD, like the loops on it. What is Skidmore? Think i'm lost in translation here :-\
-
Hers the web Bob
http://www.skidmores.com/
Nice JD, Gives me an idea.
I made a knife pouch fer my ...well here's a pik
(http://i120.photobucket.com/albums/o187/JakeHarlow/Blackbeauty.jpg)
-
Very nice JD :D
-
Tanx MS, now I´m on track again ;D Nice work by the way..
-
Howdy JD
Great job.
MS
Good lookin knife pouch.
WC
-
Thanks B.Bob and WC, that JD sure did a nice job on the badge holder.
What makes my leather smell like it just came out of the Army supply, kinda like moth balls?
I may have to switch suppliers fer my leather.
MS
-
WOW! a cowboy has gotta stay in the game here!
OK, JD... pard those are some mighty fine holsters you showed a few pages back. Hey, it's leather it don't always color the same shade...so, beautiful leather work. The badge holder with cartridge loops...who'da thunk it? novel idea ;D.
MHB, pard keep it comin great leatherwork!!
BHB, I love that Ruger emblem mighty fine.
Will G, WOW! what to say? Beautiful!! There's a few of you cowboys on this forum in your own league.
Montana, my man you nailed that sheath mighty good leather work pard.
Wiley ;D
-
nice job jd.
you can squeese the bullet loops together a little more if you dont use a rivet in between the loops.
just need a rivet or sewing on the outside edges of the bullet loops they wont loosen up doing it this way.
just a thought.
-
Thanks Wiley, I'm so glad that Bro. Tex like it and did him good.
He had the right measurements and it worked out great.
My g-belt is almost half way done, lots of carving n' tooling on that puppy. Whew. ::)
-
That's true Knucklehead, but this particular fella only wanted two, 'cause he wanted space between the bullets so he could grab one fast. Most of the reloads under the clock are one, maybe two, if you do one handgun and long long gun, like we did at our last shoot. I suggested a third one just in case.
I've watched guys with a full row of bullets close together struggle to pull one out when there's a bunch.
-
Looks good, JD. Nice work.
-
Thanks for the positive comments everyone. It's a good design thanks to Slowhand Bob, but I'm not too excited about my execution; very sloppy due to time constraints. I will offer to make him another one after this Saturday's shoot.
Slick you did a nice job on that sheath!
-
JD, that badge holder is the berries man. Very nice job.
-
My heartiest compliments to everyone for all of the beautiful work posted here recently. It's always a genuine pleasure to view everyone's fine work.
Many thanks to you Ladies and Gents for sharing your talents and expertise with us.
We arrived back in Wisconsin last night from our ski trip. Internet access was unavailable at times in the mountains. Now it's time to get back to work in my Leather Shop. I hope I didn't forget too much.
-
Thanks pardsfor all the kind words been doing this for about 9 months now and i have learned more than i can tell all of you from this forum you pards are all aces in my book (no pun intended) but any body thats just geting into leather work this site should be a must in the 101 of lether work so much talent hear and all are willing to share you cant buy that kind of schooling, THANKS,
MHB
-
JD and Montana:
Lookin' good pards. Nice job.
-
JD I,m agona give u a BLUE Ribbon for the badge holder. KT ;)
-
Thanks KT. I'm slowly creeping up on the items that have eluded me, like bullet loops. I still have to try sewing some instead of weaving, but I'm getting there. I haven't done any figure or animal carving yet either, but I'm in no hurry for that one :-\
-
JD, AWESOME :o :o :o :o I LOVE IT! I never thought of making a badge holder ??? See How Brian dead I am!!
Montana, AWESOME RIG :o :o :o :o Is that the rig you where most of the time?? I love the Stars and the layout is SUPER!!
Keep Up The great work!!
ACE
-
Here I´ve done a pattern for belts, hade nothing to do so I tryed someting new..
Want to shere it with you pards..
-
That looks good, BH. It'll make a fine belt pattern, just a little different than the norm and more interesting.
-
Bob, get busy thats a great idea for a belt or a holster. I really like that one.
-
BHB,
Great pattern! ;D
-
howdy Pards,
Here is another rig that I had started before Turkey Day, I finished it today, wasn't much left to do to it, I am sorry the pictures are very good. I am kinda proud of this rig! It os a double strong side holsters that I designed, it also has 12 bullet loops. I spent a lot of time on this rig because I am sending it to a friend over in Wales UK.
See What You Think!
ACE
-
Howdy Pal
That is absolutly first rate.
WC
-
Ace,
I gotta say it!! ::) AWSOME!! :o ;D ;D :o ;D ;D
-
WOW, Ace ol friend that is a mighty pretty rig. I can see why you are proud of it. Great work.
-
Howdy Ace :D ;D :D ;D
Well now Pal, looks like you're feeling a little better, this rig is beautiful, and I see you used that great barbed wire stamp, nice touch, your friend in Wales will go crazy for sure, Well done, and it's good to see your work back in the forum, keep up the great work pard. ::) :o 8)
tEN wOLVES :D
-
Howdy Ace,
You have every right to be proud of this fine Rig. It is first class! You friend will be very happy. Many thanks for sharing it with us.
-
That's what ya call the dog catchin the frisbee..YEEEHAAAW! That's what i holler when my dog catches his.Great job Ace.
-
ACE, WOW!!! What a great job on the rig. Glad your gettin back to some work. Has it warmed up some there?
AC
-
That's really good work, Ace. Beautiful.
-
looking good ace like the spots
-
BhB, I'm a fan of the tri stamps, so I think it's cool, and like Marshall Will says, it's different than the norm, but that's ok.
ACE, that is a Sweet set up pal, you did a nice job with it. That is my kind of rig; more modern than old time.
-
Nice, Ace!! You mean you ain't gonna keep that? Dang. Just make yourself a duplicate. :D
-
Very nice work Ace!! It looks very well laid out, the spots are dead on, and the time you took shows in the finished product!
Keep it up!
DM
-
Howdy Pards,
It does my heart good to hear all the kind words from my friends!! I put a lot of hoyrs in on that rig, but I wasn't in any hurry! I realy like making the Hollywood rigs but they are not my favorite! Someday I play on making a rig like the first one Curley Cole posted! But I feel that is a project that will take a ton of time and right now isn't the right time, maybe this summer???
Thanks so much for the kind words!!
ACE
P.S., AC it is warming up a little, tomorrow is going to be 73 degrees, and i will try and make it in the shop!
-
Boothill Bob:
I like it. Interesting, out of the ordinary and clean. I was thinking what a nice dress belt pattern that would be.
Ace:
Good work, pard. Man, it doesn't see like that long ago that you were just getting interested in this stuff. Sure come a long way since then.....
-
Ace old buddy, sorry Im so late but I just saw your rig and its a dandy. You know the old saying, youve come a long way BABY ;D ;D and all for the good. Good to see your doing some leather work. KT
-
Nice work BHB, looks complicated.
Thanks Ace, looks like we have the same taste in leather designs, nice rig Pard.
Yes,I wear that rig at all of the matches, it's my MS da lawman.
I'm currently werkin on a brown rig, carved and tooled, so far so good.
-
Well hey slick lets see some progress picts know your doing this one up extra good what with the carven and all lets see what ya been up to saw a bit of the belt i reckon or did we
-
Not yet MHB, I'm almost half way done with the belt, takes fer ever to carve n' tool the pattern.
Dooin the whole belt, would like to take it out at the next match here in a couple of weeks.
Will post it soon,
MS
-
Wow ACE. Black with shiney spots are a great combo! I'd wear that rig with a lot of pride. I bet your friend will too!
(http://www.cascity.com/forumhall/index.php?action=dlattach;topic=228.0;attach=27508;image)
-
I re-visited a pattern from last year, to see if I could improve it a bit. This time I had a better quality leather, and more experience. Luckily, it matched well with the already existing cartridge belt. Gotta love this stuff, eh?
-
Howdy Santee,
That is one fine rig you have made there! It has a great period look to it. Many thanks for sharing it with us.
-
Sante, you nailed that one. It looks like a pro built it in the 1800's. I love the color and the overall final look.
-
Howdy Santee,
It Is AWESOME :o :o :o :o It tirned out perfect!!! Doesn't feel good when you make something that turns out the way you what it!!!!!!
Super Job!!
ACE
-
Santee great job and nice color. KT
-
Santee and BJ, verry nice rigs there :D
-
Santee,
Ya done real good!! ;D
-
Santee rig looks like it just came off the rack 100 yrs ago it be a Fine rig fo sure
-
Nice job, Santee. Well done.
-
Santee old pard, beautiful work, this holster has a nice neat look to it, with just the right amount of tooling, and the color matched real well with the belt, well done for sure. ::) :o 8)
tEN wOLVES :D
-
Hey Folks,
Again, runnin' through camp! Postin' a pic of a Jesse James rig I made for a recognizable patriot, but can't say who just yet. Photo link show the new Jesse James buckle, this one in silver. http://www.willghormley-maker.com/Photos.html
I've got the JJ/HOG buckles on the bottom of my buckle page now: http://www.willghormley-maker.com/OWCBuckles.html
Update on missionary daughter comin' home: South African husband stopped at the border in Chicago and sent back to S.A. Everyone here is heart-broken. Workin' on gettin' him a visa that will allow him to come back to the States as married to an American Citizen. But, the good news is my daughter is safely out of S.A. and workin' to re-unite the family. Keep the kids in your prayers. It is tough on 'em, especially Rocky.
Will
-
Links aren't workin Will..Best of luck..
-
Santee, whay kin I say, I like it, looks period correct and down right Awesome.
MS
-
Santee
That is a good lookin rig. I like the color.
WC
-
Howdy Will
I hope everything works out for the family.
WC
-
Will, I agree with WC!!!! I know that you are busy, hope that all goes well!
Later
ACE
-
Will, I'm happy to hear your Daughter is home safely, and hope things work out for her husband, but at least she is home, your new rig looks great, and so are the buckles.
tEN wOLVES :D
-
Will are prayers are with you will at this camp allso.
MHB
-
Will, my prayers are with you and the family.
And thanks all for the kudos. :)
-
Will lots of luck with the family. Nothing more near and dear than the children. KT
-
We will be praying Will. I've been hearing about people having this sort of problem in and out of the US.
-
Gettin in here kinda late. Santee that is a very nice rig,especially the color.
Will, I hope everything works out for the family.
-
Thanks Boys.
Your prayers are payin' off. We are cuttin' our way through the red tape. The kids got Skype set up on the computer so they can see each other while they talk for free. It was nice bein' able to interact with Rocky and see his big smilin' face. Rocky is 6' 8", his real name is Petrus Jacobus Maartens, but since Petrus is South African for Peter, and Peter is Greek for "rock", I gave him the American name of Rocky. It fits and he likes it.
I got to meet Rocky's mom and talk with her for the first time. That was nice. There have been some good things to come out of this very bad situation. Like the Good Book says, "All things work together for good for those who love God and are called according to His purposes." With your prayers and support, we'll keep pressin' on.
Thanks,
Will
-
Will thank god , you know as well as the rest of us payer works, and weve been prayen hard you are still my hero no mater what an humble people god lissins to he has a soft spot for cowboys and i beleve hes got a soft spot for those in your camp , you give and give and its what in you hart that matters. i know should have been dead many times but yet i m still hear i thank i can speak for every body in wishing you all the best, keep up the faith and never let your gaurd down you know its comming when we will have to make a stand and i would be honord to stand with all my frends i have meet on this fourm they are all patroits and 100 % American,
This country Will not be taken easy
Missouri Half Breed Brother in arms
-
Here is very rough prototype of a Shotgun Shell & Cartridge Combo Slide. It will hold (6) 12 Ga. shells, (5) .38 special rounds and (4) .45 Colt rounds.
I made a layout on paper first and it did not turn out as expected. There will be some refinements and adjustments made on the final version. I really got rusty after a three week vacation from leather working.
-
Johnny M looks darn good to me. If thats rusty you better go on another vacation. :D ;D KT
-
Johnny, you did a dandy job on this slide, well done pard ::) :o 8)
tEN wOLVES :D
-
This says it all
-
Johnny i think it looks good practal and all around darn usefull need to get around to maken somthing like that for myself thanks for sharing it gives me ideias
MHB
-
Santee, very nice holster. You did a great job of matching the belt. That gets a thumbs up.
Will, glad your daughter is home and you're all working to get the rest of it straightened out. Sounds like a great kid.
That rig looks good with the buckle. Nice to see those available.
Johnny, that looks like a good design. Very well thought out. Nice work.
-
Howdy John
That is a cool slide.
WC
-
Look how Jack Houston from Lone Dog leather does his shotshell holders.Just wondering if it works well.Saw these posted on the sass wire..
[Dead link deleted by moderator]
Nice work John.
-
Pretty fancy slide, there, Johnny. That should work nicely.
-
Looks good Johny, but a couple of questions (Big surprise ::))
Are the shotgun loops woven, using a bag punch? How it is working not sewing the entire strip underneath the shotgun shells? It that something you plan to incorproate in future slides?
Thanks John, very inspiring!
-
Many thanks for the kind words.
JD,
These are woven loops. I don't use a bag punch... just punch two round holes and complete the slot with a utility knife. I lock the loops in place with Barge. Not sewing the strip underneath the shells all the way was a goof on the prototype. I'm going to make a final slide and I'll take some pictures.
-
Howdy Johnny,
I realy like the cartridge belt!!!!
I can't wait to see the improved one!
Later
ACE
-
Thanks Johnny, I do appreciate the information
-
Another "stingray" holster. This is a modified western style with a belt loop. Main body is mahogony in color with a black stingray insert. The gun is a Uberti 3 1/2" with a birds haed grip....45 Colt cal. The holster is for an old guy who used to have a gunstore and leather shop, and is no longer able to make any of his own leather..
-
Beautiful holster Outrider, as always your work is top notch.
tEN wOLVES :D
-
Howdy Outrider.
That is a very sharp holster. I'm gonna have to try that sometime.
WC
-
Outrider, that is a beauty!
-
Outrider those are just beutafull ya out did yourself this time pard
-
Howdy Outrider,
Beautiful work! A real eye pleaser. Thank you for sharing it with us.
-
Thanks for the kind comments. I was considering doing a set with inlaid Caimen (small croc from South America) until I found out what the cost would be...$12.00 to $14.00 per CENTIMETER...wow that's $ 30.00 to $35.00 per inch....ouch...those amazon fellers have a good business going there for sure....
Maybe I should go on a hunt in the sewers of NYC..I hear tell there are lots of alligators in there....NOT
-
Outrider I sent my wife the pic of you in front of the sewing MONSTER and she was clearly impressed. She's a pro with clothing, quilting & all sorts of domestic sewing stuff. She won her first sewing competition at age 12. She operates the industrial singer I was given when the need arises.
-
Outrideer, beautiful job on that stingray. Your work always shows a lot of quaility and attention to detail.
-
Outrider I do a lot of inlay so I can appricate the job u did. Very nice KT
-
Kt can you tell me how to use photo bucket to post a photo over 150 kb cant get two to post says they are to big and i cant semed to resize them
MHB
-
MHB read your email. KT
-
Thanks KT uill try that
-
That's a handsom holster, Outrider. As usual, you make those ray inserts look great.
-
Very nice inlay work Outrider,real nice!I like that dang stingray alot. Kt is gonna want these back now,these are ones he did...I just can't remember where i put them ;D ::) Actually the first stingray i ever seen in hand thanks to KT.
[Dead link deleted by moderator]
-
Rick,
Nice rig....and of course...STINGRAY.....KT you did a nice job there.
Hey I still like that hat ::) ::) :D ;D
-
That's a real nice rig Rick, you are blessed to have one of Terry's rigs. He puts a lot of heart in the things he makes.
-
I know this is really elementary leather work but I needed a pair.
As the last ones I made 18 years ago, yes that's 18 and still to this day wear every day they have definatly seen better times! ::)
I found enough Elk so this was a no cost project which is also important, very VERY slow around here.
Any way here they are.
Ned
-
Ned thats some nice work, Should last u a long time. KT
-
Howdy Pards,
Outrider awesome inlay job, makes for a sweet holster!!
Rick, that sure is a super nice rig KT made for you!!!!
Ned, Awesome slippers!!
Thanks all for sharing!
ACE
-
I know this is really elementary leather work but I needed a pair.
As the last ones I made 18 years ago, yes that's 18 and still to this day wear every day they have definatly seen better times! ::)
I found enough Elk so this was a no cost project which is also important, very VERY slow around here.
Any way here they are.
Ned
Very nice, Ned. Where do you get the soles?
-
It's called sole saver made by Cats Paw. I bought a bunch of it from a cobbler supply place that was going out of business.
It comes in sheets about 2 feet square, I've got way more than I'll ever use do you want some?
Let me know.
Ned
-
Those are very comfortable looking, Ned. Nice job on 'em.
-
Howdy Ned
That's very cool.
WC
-
How about a pair in size 8 ;D
-
well got the cross draw done so hears the set
-
Sure is easy to get way behind here.
BHB, I've got that tri weave stamp but it confuses me never have crafted anything with it, I like what you've done.
Ace, very nice looking gun rig pard good to see you back at it.
Santee, just right pard nice leather work.
Outrider, beautifully done as always .
Johnny, always good to view your work nicely done pard.
MHB, good leather work pard well done.
Ned, those look comfortable.
Hope I didn't leave anybody out mighty fine leather work being shown as always.
Wiley ;D
-
I'll second, that, Wiley. Congrats to all for wonderful work.
-
Wiley. There kinda' ain't instructions for it. Basically you treat it like a triangle. Pick one point and think of it as the top with the other 2 as the right and left bases. If you want to put your pattern straight up the middle of something then draw a faint line and center the topmost point. If you whack it and get a good 3 point basketweave impression then move it up until the bottom (center) of the stamp fits over the top of the first impression. Work your way up and when done, keep it vertical and start again. The next row will fit into the first row like a jigsaw puzzle..
//Boothill Bob
-
Nicely made spade.
-
Thank you Santee
-
Howdy Ned,
Your Slippers look pretty professional to me. Very nice job! Sometime I'll have to make a pair for the wife and I.
Howdy MHB,
Beautiful looking Holsters! Great job of finishing and decorating! The Ace looks cool.
Many thanks to you Gents for sharing your work with us.
-
Ned, good lookin foot wear.
MHB, good job on your holsters. Very clean lines on the holsters and the spades. Good attention to detail, something I really need to work on.
-
Nice holsters MHB, keep up the good work
-
MHB, COOL looking holsters, and nice Spades. ::)
tEN wOLVES :D
-
MHB Just saw your holsters. There very nice looking. Good job. KT
-
MHB,
Good looking set of holsters..
-
Hey guys, youall are getting ahead of me again and doing some very nice work to boot. Great looking stuff.
-
Had the belt and holster done for a while, but just finished the knife sheath tonight...
-
Finished this one yesterday...
-
These have been done for a bit, wasn't sure if I posted em yet.
-
CC thats some nice looking leather work your showing. KT
-
Howdy Camp Cook
That is some good lookin work.
WC
-
CC, I don't think I have ever said howdy. Welcome to the forum amd those are some fine looking items you have posted.
-
Thanks fer sharing yer fine leathers, Mighty fine craftsmanship.
MS
-
Howdy Camp Cook,
Welcome to the Leather Shop.
That's some fine work you have posted! We look forward to seeing your future projects.
-
Howdy Camp Cook, let me say welcome to the forum and introduce myself. I'm JD, the Nosey One around here :P I'm always asking questions, to try to learn more about this thing called leatherworking.
All of your work looks good, and I appreciate you sharing pictures. The scabbard especially interests me. Are those snaps on the bottom or Conchos? Either way it looks real good. What kind of leather did you use? I’m not real good at identifying leather yet.
Thanks a lot.
-
Welcome Camp Cook
We're happy to have you join in and share with us, you have made some nice trappings pard, they all look great, have you been into leather for a while, your work shows you have the know how.
Thanks for the look see, we will be looking to see more from you ::)
tEN wOLVES :D ;D
-
HB, that'a a fine pair of holsters. The spades work nicely.
CC, that's some very nice work. Nice rig in the first photo. The rest are all good. Thanks for sharing those with us. Looking forward to more of your stuff.
-
Welcome Camp Cook, mighty fine work. Would you be a chef?
AC
-
BHB, thanks pard for the info on that tri-weave stamp I am going to try your method.
Whoa! Camp Cook that is some mighty fine looking leather crafting pard. Please don't tell us you just started doing leather work. Thanks for showing your work.
:) ;) :D ;D
Wiley
-
WOW its hard to keep up around here. Nice work everyone. :-*
Here is a couple of my projects I have been working on.(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1471.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1471.jpg)
This is a credit card ID card holder and this is what I call the Egnar Purse.
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1467.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1467.jpg)
-
WOW! That is some nice carving on that purse! :o
-
Beautiful work Helda, you put out some nice things, my wife would like that purse, and the card holder, thanks for sharing.
tEN wOLVES :D
-
Aw shucks.. thanks.. That is a huge compliment coming from you two!!
I appreciate it! I am now starting on another purse with more FILLAGREE> :o. Oh Geez I think I have started something.
-
Helga you do, do some nice work. I cant wait to see your purse. I always like looking at good leather work. KT
-
Howdy Helda
Very nice work on the card case and the purse.
WC
-
Good morning Helga,
That is some beautiful work you are turning out. Thank you for sharing your talents with us.
-
Good morning!! I am waiting on leather .. it seems I can't order it fast enough.. those purses take up a lot. I did get more lace from Tandy. Thanks for the comments, Johnny McCrae and WC and Kidterico.. if you have suggestions please feel free! I am just winging it! ;D
-
Helga my suggestion is keep doing what your doing. It looks great. KT
-
Howdy
If you're just winging it, we're all in trouble........
WC
-
Helga, beautiful work!!
I have been making some patterns lately inspired from pictures in Packing Iron.
Wiley
-
That is a super holster >> I have been thinking about the meander stamp and getting one..but I am not sure which one I like best.
Oh and Wiley.. Its Hel DUH ... Like Hell ta Huginkisss, My Sisteers are Aneeda... Like, I need a Huginkiss, Lenda ... Like, Lend A huginkiss..
and Amanduh.. Like she needs, a man ta huginkiss.... and We used to have a sister named Kenya CAN YA huginkiss??? Don't ask we were drinkin Margeritas!!!
-
I have been making some patterns lately inspired from pictures in Packing Iron.
Wiley
Marvelous color, great variations in tone.
-
Nice use of the meander, and the color looks good too, you're putting out some nice stuff Wiley
tEN wOLVES :D
-
My apologies Helda on misspelling your name and thanks for the compliment on the holster very much appreciated. ;D
Forty Rod and TW thanks pards for the kind remarks very much appreciated.
Wiley ;D
-
Howdy Wiley
Nice holster.
I love meander stamps.
WC
-
Howdy Wiley,
Beautiful work! Excellent job with the Meander stamp! It ain't the easiest stamp to use. Thanks for sharing.
-
Miss Helda, That is some great carving on that purse. Like WC said if you are just winging it we are all in trouble.
Wiley, ol pard, looks like you have done twisted the knot outa that ol bronc's tail. Mighty pretty work my friend.
-
WC, Johnny, GB thanks pards I appreciate the compliments like we say around here "all y'all" know how to make an ol pard feel good about his leather work. . ;D
Wiley
-
Helda, good work on both items. The colors on the purse are really great. Nice work on the tooling, too.
Wiley, that holster is really good looking. the meander works very well and the finish is impressive. Looks like it should be IN Packing Iron.
-
Thanks for the welcome Gents.
Yes, I am a Chef. Currently teaching Culinary Arts at a Utah Job Corps Center.
I have been doing leather as a hobby for a year or two. Wish I had more time to work on projects.
JD, the scabbard is made with a nice piece of upholstery leather I picked up at a local Utah store by the name of Smith and Edwards for $14 bucks. Those are conchos on the bottom, I just wanted something to anchor my sewing a bit. Sewing that sucker by hand was a definite learning experience!
-
Howdy Wiley
Far be it for me to tell anyone how to use a stamp or lay out a pattern. When I looked at yours up close my eyes caught the corners.
Here is something to think about for other ones.
I stamp my inside row first starting in my corners and working to the middle. That way I don't have a stamp kinda hanging out there on the end.
Just a thought.
WC
-
WC thanks for the info. KT
-
Cowboywc now i like that,i been going about it all rong i draw out the holster pattern first then cut it out and then try to figure out hoe to get my border stamps to go on right im going to try your way next
-
Howdy KT how ya been doing hope ya feeling better
Regards MHB
-
Howdy WC,
Great tip! Thank you for posting it.
-
Just finished a remake of my prototype slide. It was immersed in the Walnut dye for two hours followed by two coats of Neets and two coats of Skidmores.
-
Howdy
I know this was posted a long time ago but here it is again.
A tutorial on Meanders.
http://s394.photobucket.com/albums/pp25/cowboywc/Meanders/
WC
-
Johnny M this turned out fantistic. Love the color. KT
-
Johnny, the finished product turned out great, your customer should be very happy with this set up, thanks for sharing with us.
tEN wOLVES :D
WC, thanks for bringing up this meander link, it should be very helpful to all that want to give it a try.
tEN wOLVES :D
-
Johnny those are terriffic! Wc Thanks for the Link and the tip.. I am going to get me one of those stamps :D
-
I love the meander stamps. Thanks for re-posting that tutorial, WC.
-
Marshall, thanks for the compliment on the holster.
WC, thanks for the great tip on using that meander stamp I'll certainly make use of that information pard.
Johnny, very good design pard that should work very well.
Wiley
-
WC, thanks for the pik and how to do yer pattern, yer a genieous.
Hers a pik of me new gun belt, more piks later :)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0232.jpg)
(http://i120.photobucket.com/albums/o187/JakeHarlow/DSCF0230.jpg)
-
Ok slick it was worth waiting to see ya did a real good job and the color is great. i hope i get that good one of thes days,
MHB
-
Nice work Slick, taking your time always pats dividends. ::) :o 8) ;D
tEN wOLVES :D
-
Great carving & color Slick! ;D
-
http://s169.photobucket.com/albums/u229/Fortyrod/Gun%20stuff/
-
Okay, got the whole dang album. How do I select certain pictures (Or remove the rifles without taking them off of other posts), post the pics here instead of the link, and add captions?
-
Johnny, I love the slide, it looks great
WC I look forward to having some time to check out your teaching.I stay away from meander stamps at this point, maybe this will change that.
Slick, way to go!
-
Forty, don't worry about it, it is nice to see all the guns and trappings in one spot, your rifles are great, what a nice collection, and I really like your rifle cover, you might need to put me in your well with all that good stuff ;) ::) ;D
tEN wOLVES :D
-
Thanks MHB, and TW, took me time aw right, just finished up in time fer the Windy Plains shoot on Saturday.
I ran outa leather so looks like re-loading fer awhile. ;D
-
Johnny, great looking slide. It looks like it will get the job done.
Montana, very nice work. you need to get you some more leather before you lose your edge ;) ;D
-
Forty, don't worry about it, it is nice to see all the guns and trappings in one spot, your rifles are great, what a nice collection, and I really like your rifle cover, you might need to put me in your well with all that good stuff ;) ::) ;D
tEN wOLVES :D
I would but I don't plan on dying.....ever! v ::)
-
Forty Rod, I've met a number of people with that belief; well actually I met their loved ones while planning their funerals.
So good luck with that :D
-
Howdy Slick
You carving is coming along fine.
Remember your deco cuts should flow with the pattern. Start heavy and lift out of the cut at the end of the stroke.
WC
-
Montana, You did good pard nice carving on that belt the color is great.
Wiley ;D
-
As usual, these holsters have a story. I only set out to make one as a test of a pattern and the weight of leather. These are made from Tandy saddle skirting, about 12 oz. and unlined.
I had a plan for the back with a bigger skirt and "wings" behind the belt, like Longhunter and at least one Evil Roy WB holster I've seen, but my measurements didn't work out. That’s one reason I didn’t do any stamping. Once I cut it down, I decided what the heck, might as well make two.
Now I guess I’ll make a belt to match it.
(http://i165.photobucket.com/albums/u51/HarleyPastor/Bleedknotholsters1.jpg)
-
JD they look pretty nice plain and two toned. KT
-
Howdy JD,
That color combo looks great with those
black handled pistolas. Niiiiice work.Can't
wait to see the belt.
WBC :D
-
Hey KT, what do you think of those stitch lines? That's your influence dude!
-
Nice work, JD! I love the color!
DM
-
Thanks Dalton, coming from you that means a lot. I did two coats of straight pro dark brown, with a coat of EVOO in between. Then I applied a coat of Fiebings Sheridan Brown antique paste, which gave it a richness it didn’t have without it.
I applied two coats of EVOO to the straps, then a coat of Eco-Flo all in one Desert Tan. This is the first time I’ve tried this type of dye, and I only used it because the leather was too pasty color wise for me. Finally I put a coat of Lexol on the straps.
-
Fine looking holsters JD! ;D
-
Howdy JD
Those are mighty good lookin.
WC
-
Good lookiin holsters JD like the two tone a lot
MHB
-
Good looking, JD. Great work!
-
Verry nice work JD, I like the model ;D
-
JD,
Nice looking set of holsters...now...onto the belt ::) ::) ;D
-
Howdy Montana,
Beautiful work on your Belt! The carving and design are excellent. Great color and finish!
Howdy JD,
Those are some beautiful Holsters! The contrasting finish gives them a great look. Nice job of dyeing and finishing!
Many thanks to you Gents for sharing your work with us.
-
Thank you gentlemen, I appreciate the positive feedback. Overall I'm happy with how they came out. I think the next set with be a little narrower towards the bottom, with more of a curve. These are a little too straight up and down for my taste, something I didn’t realize until it was too late on this pair.
I think I’m going to make a ranger belt and carry on the two tone look with the belt dark and the billets the same color as the straps. I’ve not made a belt with a sewn on billet yet, so I need to get to it.
-
Well JD, they look good, nice blood knot too in your concho.
tEN wOLVES :D
-
Howdy Pards
I finished up a new rig this week, I thought you might like to see, I call it a Classic Lawman's gun leather, the holster is lined, and you can see a little buck shot hole at the front of the skirt, I didn't realize it was there until after I did my cutting, it looks like an injection hole or insect bite, but I'm going to call it a buck shot hole, just cause it sounds better, this is one of those cases where you make a flaw work for you, which I like doing anyway, the tooling I made simple, and didn't add any bling, the holster is on my lock system to help keep it where I want on the belt, it also has a hammer thong, the belt is a money gun belt, with twelve bullet loops sewed in, the loops are on the right side for easy loading as is the buckle, this is the way I like building a left handed rig. The whole rig was dyed in my extra dark roast coffee dye, and finished the way I like finishing.
Thanks for stopping by and taking a look see
tEN wOLVES
-
more pictures
-
Howdy TW,
That is one fine looking Rig! The color and finishing are awesome coupled with your usual first class workmanship! This has a great classic look to it. The buckshot hole certainly adds character to the Rig. Many thanks for sharing your talents and expertise with us.
-
JD, I know that the belt will look as good as the holsters and they look great.
TW, very nice looking rig. It does have that classic lawman look to it and I really like that money belt.
-
Digging that color, man! Really nice work.
-
TW that is an Awesome rig! Look for a PM
-
JD, you are really getting good.... Those holsters are top notch. Can't wait to see the belt. Bullet loops ain't that hard, after you do a couple the rest fall into place.
TW, again you have nailed it. Great lookin rig.
I wish I was retired so I would have the energy to work on leather every day. OH well, only three years max left.
AC
-
TW,
That is a down right sinister looking rig! ::) ;D :o ;D ::)
-
JD, you are dialed in on those holsters my friend real good leather work! The two tone coloring has got a great contrast to it. Talent plenty of talent. Looking forward to seeing that ranger belt knowing it will be good.
TW, out of the ball park over the center field fence and into the parking lot...you slamed it...beautiful!!!
Wiley ;D
-
Nice work, Slick. That belt is a fine one. I like the floral design. Well done, pard.
Very nice contrasting holsters, JD. Yep, a belt is in order, now. The ranger in two-tone is a good idea. Looking forward to seeing the complete rig.
TW, that rig is very nice. That California Roasting Company brown really looks good. The holster and money belt really are a nice combination. Good work.
-
Howdy Pards
Thanks everyone for your kind words, Johnny McCrae, Gun Butcher, Santee, JD, Arizona Cattleman, Dr. Bob, Wiley Desperado, and Marshal Will Wingam, I really do appreciate your input, this was another fun rig for me to make, seems like every piece of leather I start a relationship with turns into another learning experience, I really love my leather, and don't seem to be able to get enough of it.
Thanks again for stopping by and taking a look see
tEN wOLVES :D
-
Hey now :),i like that money belt too and the color TW.
Dang nice two tone JD.
-
TW thats a very nice rig. Its plain yet has just enough design to give it lots of character. Money belt gives it a nice finished look Your not a south paw , are you? ;D ;D ;D Grerat job, cant wait to get well enough to start again. Thanks for showing.. KT
-
TW, what can I say.... BEUTIFUL.. That is one of the patterns I dont have... Love the color :)
-
Very very very very nice 10W!! Inspirational to say the least!
DM
-
Ten wolves.. I have tried and tried to get that color.. The whole rig is awesome!! :-*
Hugs Helda
-
Thanks Gun click Rick, Kid Terico,Boot Hill Bob, Dalton, and Helda, your comments and kind words are appreciated, Helda using natural dyes you can get colors that you can't get out of a bottle, and you can control the depth and tone also. Kid some times I like doing a plainer looking rig, it will highlight your gun better, LOL. ;D
Thanks all for stopping by and taking a look see ::)
tEN wOLVES :D
-
Man, my coffee I just tried didn't have the same effect. I did it per instructions, but it seemed much lighter than yours. Maybe I shouldn't have added cream... (little joke).
-
Man, my coffee I just tried didn't have the same effect. I did it per instructions, but it seemed much lighter than yours. Maybe I shouldn't have added cream... (little joke).
Santee, I add some iron to a one pound can of Extra Dark coffee , I use the whole can, I use about two heaping table spoons of broken /crumbled up iron, or you could use a dozen iron nails, while it is cooking and I leave it in. After cooking for three or so hours, when cool I pour the whole thing into a container grounds and all, without the iron you will get a much lighter color, which is what some like or prefer, for me I like the darker color, and the adding of iron gives that to me, when I cook the coffee, I cook it in a 20 QT. pot , filled about 3/4 full of water, after I bring it to a boil , I put the lid on and turn it down to a simmer, I know there are other ways of doing this, but this is how I do mine, and I'm happy with the results, give it a try with the iron.
tEN wOLVES :D
-
TW
That is a good lookin rig.
You make me very proud.
WC
-
TW
That is a good lookin rig.
You make me very proud.
WC
Thanks WC,you're a big part of everything I do. :D ;D
tEN ;D
-
Thanks WC,you're a big part of everything I do. :D ;D
tEN ;D
WC that goes for me too! Thanks for everything!
-
Man if you guys seen the coffee i drink,them holsters would be black :o :o :o :o :D :o :o :o 4 scoops Dark French one cup water :P :-X
-
Man, that 'splains a lot!!! :o ;) :D ;) :o
-
I've added a belt to this set of holsters. As you can see it's two toned. I'm working on a second belt that is the color of the billets on this belt, with brass spots to tie in with the brass Conchos. I’ll dye the billets the same color as the holsters
This is my first ranger or billet belt. I've done straight and tapered before. If you see anything I ought to change, or maybe a better way to do something please let me know. I’ve intentionally used an extra long billet, since I’m going to use this rig myself and it’s a personal preference.
(http://i165.photobucket.com/albums/u51/HarleyPastor/twotonerigcrop.jpg)
-
All looks good to me JD!
-
Lookin good JD.....
WC
-
Howdy JD,
The entire Rig looks great. I wouldn't change a thing.
-
Nice clean lines, great color and well executed. That one is a winner JD. Couldn't ask for better than that
-
JD turned out really good. Nice combation of color. KT
-
JD the combo lookes great! i wouldent chang a thing eather was thinking about you last knight i watched Pale Rider you know gun toten preacher, keep up the good work and god bless parson
-
Absoultly outstanding JD, Great rig. :) :)
AC
-
Very nicely done JD the two tones work good together.
WD
-
JD, you aced it, it looks great, nice clean work, you can be proud of your self. ::) :o 8) ;D
tEN wOLVES :D
-
Came out great!
-
Santee, I add some iron to my coffee, while it is cooking and I leave it in. After cooking for three or so hours, when cool I pour the whole thing into a container grounds and all, without the iron you will get a much lighter color, which is what some like or prefer, for me I like the darker color, and the adding of iron gives that to me, when I cook the coffee, I cook it in a 20 QT. pot , filled about 3/4 full of water, after I bring it to a boil , I put the lid on and turn it down to a simmer, I know there are other ways of doing this, but this is how I do mine, and I'm happy with the results, give it a try with the iron.
How much coffee and how much iron? I may have to make some of this stuff. If it doesn't dye things the way I want, I can always drink it. ::)
JD, that two-tone belt is perfect!. You really did a fine job on the whole thing. We don't have an icon for thumbs-up, but I'd use one here. 8)
(http://icons3.iconfinder.netdna-cdn.com/data/icons/freeapplication/png/24x24/Thumbs%20up.png) There. ;D
-
Thanks guys for your kind comments. I used this rig today, and it worked out pretty well. The next holsters will be a tad smaller in diameter. What I didn’t take into account was the leather stretching with use. Now the guns are dropping down a little too far for my preference. It’s not enough to stop using them, but I will take the next ones in a little, and make the body a little slimmer.
-
OK, I needed something to do today so I finished up a little knife that was almost a throwaway and made a sheath to go with it.
Knife is only 8" overall.
Gotta keep yer hands busy I reckon.
-
That's cool, GB. I like the way the sheath wraps around the handle. Nice touch.
-
Thanks Marshall, the sheath is only made of 5-6 Oz stock. More of a try it kind of thing with the wetmolding around the handle.
Gonna see how it works and maybe use it on a larger sheath with heavier leather.
-
Very nice GB, like Will said cool design, is there a belt loop on this one or do you just place it between your belt and pants? great way to keep yourself busy, and this turned out great
tEN wOLVES :D
-
Thanks TW, it does have a belt loop. Just a real simple slip on loop. Dyed it with my pecan dye and forgot to shake it up real good before dipping the sheath, so you probably noticed the spots :-[
The jar now has a large "Shake well " sign on it now. ::) ;D
-
GB thats very different,, I like it. Great job. KT
-
How much coffee and how much iron? I may have to make some of this stuff. If it doesn't dye things the way I want, I can always drink it. ::)
Will, I use a one pound can of the DARK ROAST coffee, and about two heaping tablespoons of broken or crush iron, or you could use a dozen or so iron nails, I pour this into a 20 qt. pot filled 3/4 of the way up with water, bring to a boil, then reduce heat to a simmer, and simmer for about three or so hours, let cool over night, and then pour into a plastic container of your choice, but one deep enough to submerge your leather in. the dye my last rig was done in , I made a year ago, so it doesn't go to waste. when dying I leave my leather in the dye, submerged for 24 hours, then pull my leather out and rinse off with fresh water, if you're doing a belt place the belt on your bench straight or curved as you want it, when dried it will hold its shape pretty well, same with your holster, but you want to mold the holster to your gun at this time, let dry 24 hours, then condition with Lexoil conditioner, and after an hour , you can start oiling with either EVOO, or Neatsfoot oil, you will find you can vary the depth or darkness of the leather by the amount of coats of oil you apply, when you get it the way you want, let it dry over night, if it still looks the way you like it, you can either use Skidmores leather cream or use another sealer finish or nothing at all, that's open to you, or make it darker by applying more oil.
tEN wOLVES :D
JD, that's great that your new rig worked out for you today, there are always a few miner changes you want to make after wearing one all day, that makes a good test.
GB, I guess these old eyes missed that loop, it really is a nice design, and that knife is a doozy
tEN :D
-
Thanks Kid, I guess I am still trying to see what i can do with this leather working. Mostly the dyeing ??? But I'm learning thanks to all of you.
TW, you didn't miss it, I did.....no pic of the back.
-
Cool knife and sheath GB, for a test it's a keeper.
AC
-
Anothjer carving attempt. A wallet kit from Tandy. I know I should be designing my own, just learning how.
AC
-
AC you do some VERY NICE leather work. Thanks for showing. KT
-
AC, beautiful carving pard, you have good hands. :o
tEN wOLVES :D
-
Thanks TW and KT, that means alot to me. Man I enjoy this thing called Leather.
AC
-
GB what a Sweet knife & sheath! That really looks cool. Great design & stamping on the sheath.
AC, good lookin man. Ya know what they say about imitation being the sincerest form of flattery. Well, what's wrong with learning the basics by copying what others have done as training, then launching off on your own?
Both of you Pards did real nice work, very artistic indeed.
-
AC, beautiful carving :P
-
GB
That's a good lookin little knife. I like the sheath, I've made a few that way but not for any large ones.
AC
Good job of carving.
WC
-
Here's a shotgun slide I finished earlier this week. Nothing special but my design works very well.
Ned
-
AC and JD, Thanks for the comments. You two are the ones that reminded me that practice is the way to go so these little small projects are a great way to practice and try out different things.
WC, is their a reason you haven't done a large sheath this way?
-
Howdy GB,
Beautiful lookin' Knife & Sheath! The Sheath really compliments the Knife. Cool handle!
Howdy AC,
You are getting to be a real Pro at carving. You sure are correct about the practice aspect of Leather Working
Howdy Ned,
Great job on your Slide! That is a neat & functional design coupled with excellent workmanship.
Many thanks to you Gents for sharing your fine work and talents with us.
-
:) Thanks for the comments JD, Boothill, CW, Ned and Johnny. There is a lot to learn in this craft, but I can enjoy it even in my limited space and lifestyle. I couldn't do that with woodworking, as it needed a large man cave to be efficient. I have a storage area full of woodworking tools. Thanks again for everyone's support.
AC
-
Thanks WC, a point well takin, I'll do it on my next project.
-
Here is the finished project. Thats a lot of lacing. The next one is a Purse for my daughter in law, has three times as much lacing. At least your fingers don't hurt from sewing.
AC
-
Dang nice wallet AC,real nice lacing too.Now all ya gotta do is throw a Jackson in it.. ;D
-
You get used to the lacing AC, I do most of mine in front of the TV sittin on the couch.
Get's to be kind of mindless work after a while. :o ::)
Ned
-
Thank Rick, Ned its mindless once you get started, the hardest thing is the length of the lace and those darn needles that just don't seem to want to stay attached to the lacing. Maybe I am doing something wrong. I skive the end and attach the needle with the prongs going into the finished side of the lace, but they still break off.
AC
-
Howdy Ned
That is a sharp lookin slide.
WC
-
WC, is their a reason you haven't done a large sheath this way?
Howdy GB
Only reason is all the large knives have had full guards.
WC
-
Nice slide Ned, it looks very functional, and not hard to make.
AC, that wallet turned out real nice
tEN wOLVES ;D
-
Ned nice job on the slide. AC billfold turned out very nice. If its for sale I,ll give u $150.00 for it if you put 5 hundred dollar bills in it when you send it. ;D ;D ;D KT
-
Thanks TW, and KT, Hmmmmmm... No ;D ;D ;D ;D ;D
AC
-
I kept reading "Nice slide Ned" and wondering what they were talking about. I finally went back and realized it slipped right past me. Now I can say "Nice slide Ned!"
That sure is excellent workmanship, and the brass shells make it look extra sharp. It's hard to tell from the picture; how are the shells being supported in the slide? I can’t tell if there is leather underneath them or not. Is that a continuous weave, tacked at either end with fancy headed Chicago screws?
Thanks for sharing inspiring work Ned.
-
AC,
You are lookin' good! Please keep em' coming.
-
Thanks Johnny, I'm working on a small wallet for my Grandson as we speak. Will post when done.
AC
-
Ned , I didn't mean to miss you pard. That is a great looking slide, those brass shells always look tough.
AC, beautiful work on the wallet. It turned out great.
thaks for the reply WC, I thought their might be some other reason. ;D
-
Got my Grandson's Wallet completed. Busy weekend. Now on to the purse.
AC
-
GB, way to go on the knife sheath ol pard mighty fine leather work good design.
Ned, that shot shell slide is real well done. Good job on the loops.
AC, your leather carving is very good pard those accent cuts are especially nice, good looking wallets.
Wiley
-
Thanks Wiley, its been fun making things for family. Ned great lookin slide. Gota make one of those sopmeday.
AC
-
AC you are knocking them out of the Park! That wallet is the Bomb!
-
Thaqnks JD, I am exausted though.
AC
-
AC, this one looks great too, pard you're getting to be a Wiz-Bang on this leather stuff, keep it up, you're doing fantastic. ::) :o ;D
tEN :D
-
Don't tell me his name is Jacksen ??? ??? :-\ You done gone pro now AC.
-
Thanks TW, this one is smaller, and of my own design(except the carving pattern) My grandson is 4 so as long as i can put some money in it he will be thrilled. Not his B-day, my grandaughters and daughter in law's but I hate to leave him out as well as my son. So they will all get something.
AC
Here is a pic of my grand kids
-
Great job on that wallet AC
WC
-
Howdy AC,
Beautiful job on your Grandson's Wallet! Excellent carving & lacing! You have some good looking Grandchildren. They will always treasure what you make for them.
-
Thanks Rick, TW, WC and Johnny, I don't know where thoes kids got there looks, sure wasn't from me. ;D ;D ;D
AC
-
Yes JD on the slide the loops are woven through and held at each end with a chicago screw.
The pictures show the detail of how the shells are held up, it also has the advantage of tilting them out away from the body for easier retieval.
I've used this design for many years and it has worked well for me and alot of other shooters.
Ned
-
Here's another detail shot.
-
AC thats what lifes all about, The kids . Very nice grandkids. Dont know what I,d do without them. AC your a lucky man. KT
-
AC, you have some good looking Grand kids, and they look happy too, I can see how you would enjoy making things for them, with smiles like that, well you know what I mean. ::)
tEN ;D
-
+1 on the Grandkids. We have ours over every Wednesday, they spend the night. It's the highlight of our week.
Ned, you have a great design there, plus you do such nice work on top of the great design. From the first bottom shot (great pictures BTW, thanx) it seems there are 4 layers of leather. Is that correct? Is that dip dyed? That looks like pretty stout leather for the loops, but I’m not a good judge yet of size. Can you tell me what weight leather you used?
Thanks Ned, I really appreciate the education. I haven’t heard about your health for a while; are you hanging in there? JD
-
Howdy JD. I'm doin' OK, just kind of in a holding pattern right now. No news is good news I guess?
There is the 2 layers of the body of the slide with a filler strip about 3/8" wide across the bottom. Then there is the "shell plate" for lack of better terms.
So yes there are 4 layers. The strip may be overkill but it doesn't stretch like thinner leather!
Ned
-
GB congradulations. Its great to be a grandpa and I know everything will be ok. KT
-
Howdy GB
Congrats.
I've been a grandpa for 6 years now. 6, 5 and twin granddaughters 1 1/2
WC
-
I ain't nary one yet :(
-
This is my latest rig. The customer wanted a plain rig with no tooling of any kind.
-
More pics. I couldn't get a picture of the belt on here - too big of a file.
-
TN, those are real quality holsters. I love the two tone and the colors. Your customer is a lucky pard.
AC
-
Mongo, those are pure class. that don't need anything else to make them stand out. Beautiful work.
-
Very nice Mongo, that's the style I last shot quick draw in a hundred years ago, ;D nicely done pard, very professional, and they look great , good color too, you can send them my way. Thanks for sharing ::)
tEN wOLVES :D
-
TN very nice job. Nice color . Your customer should be proud to wear them. KT
-
Poifect! :)
-
Howdy TN,
As the Pard's have said, those are some professional looking quality Holsters. Your customer should be well pleased. Thank you for sharing them with us.
-
Mongo, thats a verry fine job U´ve done with does holsters, are they metal lined? ???
-
Nice job! Are those blocks of leather on the back loop for grabbing on to the cartridge belt?
-
Those holsters are top of the line Mongo. VEERRRYY Nice.! 8)
-
Great job on the holsters Mongo Top notch!!
-
Here is a derringer rig I made for a costumer, feels a little silly to make a such small rig, but he paid so I made it :)
-
Very nice Boot Hill Bob, you did a great job here, and I like the fact that you supplied a hammer thong, and you made sure the trigger is covered, which is very important with Derringers, this is also a classy looking rig, the dark color looks nice and rich, and your stitching makes a good contrast. WELL DONE PARD. ::) :o 8) ;D
tEN wOLVES :D
-
Mongo, Outstanding job on those holsters. Previous holsters you have shown here have been very inspirational to me, along with Slowhand Bob’s similar designs. This is a side view of the ones I recently posted here, but they are nowhere near as nice as yours. That’s OK, because each set I make I can see some improvement. Seeing these you’ve posted gives me more ideas of how to improve on what I’m doing, so thanks for that!
BhB that is an excellent derringer holster and belt combo; you do really fine work, and Sweden is fortunate to have a skilled holster builder in country!
Ned, thanks for your help deciphering your slide work!
(http://i165.photobucket.com/albums/u51/HarleyPastor/th_sideviewtwotone.jpg) (http://s165.photobucket.com/albums/u51/HarleyPastor/?action=view¤t=sideviewtwotone.jpg)
-
I had forgoten I had any of these left. I used to make these alot when I toured the annual matches around the midwest years ago.
Anyhow thought you might like to see what some use to carry thier ammunition up to loading table with.
Ned
Here's the Revolver side.
-
And here's the Rifle side.
-
Verry good locking loadingstraps there Ned, love the lacing..
I´ve made some simplyer ones
-
One more
-
TN
Good Lookin Holsters.
Ned
Those are sharp lookin loading strips.
BHB
So are those.
WC
-
Thanks Guys.
They were HUGE sellers five or six years ago and several years before that.
Good looking strips Bob! They can be a ton of work in a small package! ;D
Ned
-
Yea Ned, its to much work for little money :-\
I´m thinking of making loading blocks, they are east to do ;)
-
Howdy Boothill & Ned,
Thai is some great looking Leather you Gent's have posted. Very nice practical designs and excellent workmanship. Many thanks for sharing your work with us.
-
Ned and Bob, those are some really nice loading strips. Very good work.
Bob, that little rig is great. very well done and very classy looking.
-
Thanks for the positive comments pards!
Boothill, I can make this style with a metal lining. This pair doesn't have one. They have a 8-9oz body with a 6-7 oz lining. I love your derringer rig. It is excellent work.
Santee, Yes, the blocks keep the holsters from moving up and down on the belt.
JD, Judging from the pictures you have posted over the months, your work continues to get better and better. I also learn something new with every pair of holsters I make.
Ned, Those are great loading strips.
I am so thankful that Outrider told me about this forum. I'm learning so much and I enjoy communicating with other leather making guys and gals
-
TN, those are very nice holsters very impressive to get two holsters looking exactly alike in every manner, design, size, shape, color, tone, even the roll looks exactly the same amount of angle... top shelf leather work pard.
BHB, beautifully done belt and holster you are very talented my friend.
Ned and Bob those loading strips are great. The reason I never made any is just what you said Ned a lot of work in a small package, but very popular.
Wiley ;D
-
Ned and BhB, you both do excellent work. Ned, how long does it take you to lace something that size? You would need to have a customer who understood that quality costs to afford to have that done. They sure look sharp!
-
JD it takes me a couple hours I spose?
It has gotten so repetitive and uninteresting that I usually do it in front of the TV after I'm done working for the day.
I never really make any money to speak of on any given thing, if that was the goal for me I would have given up long ago! (many projects don't even work out to a dollar an hour!)
Ned
-
Tanx pards for your words, now I'm working with saddelbags, pics coming soon.
-
Damn, you boys are faster that I can keep up. Lots of nice lookin' work been posted since my last visit pards. Congrats to all. This group could virtually be its own cottage industry. Only wish I had the time to be so productive. Been making a few shoulder rigs for customers etc., but haven't really had time to post much or even create much other than filling some orders.
Nice job pards.
-
Nice ammo carriers Ned and Boot Hill Bob, I made one a few years ago, I'll post later, not as nice as your two, but functional.
Well done pards, and thanks for the look see.
tEN wOLVES :D
PS, It's nice to have you back with us Irish Dave.
-
Thanks 10W. 'Fraid it's still gonna be hit-or-miss for a while, but this is a great bunch, no doubt.
-
Thanks 10W. 'Fraid it's still gonna be hit-or-miss for a while, but this is a great bunch, no doubt.
Dave I understand being busy, but there is no pressure here, you don't have to show anything or make anything, we just like you joining in with us. Since the the Show Your Stuff thread started, it has jumped leaps and bounds, as you have noticed, so stop in when you can pard, we'll always leave a light on for ya. :D 8)
tEN wOLVES :D
-
I never really make any money to speak of on any given thing, if that was the goal for me I would have given up long ago! (many projects don't even work out to a dollar an hour!)
Ned
Boy are you correct on that comment Ned! I spend way too many hours on stuff. If I charged people by the hour, they couldn't afford my stuff.
-
Well pards I have to agree, the amount of time it took me to make this ammo carrier I could never charge enough to recoup my time, but I made it for me, so that doesn't count, this carrier isn't as nice as Neds or Boot Hill Bobs, but like I said before it's functional, and with this hard wear it easily disconnects when needed from your gun belt to place on the loading table, it holds ten rounds on each side.
tEN wOLVES :D
-
more
-
Nice leather work TW, after looking at these fine loading strips I might just be forced to make one to see if I can.
Wiley
-
Wow, another great looking loading block. All of you guys Rock!
-
I use a one pound can of the DARK ROAST coffee, and about two heaping tablespoons of broken or crush iron, or you could use a dozen or so iron nails, I pour this into a 20 qt. pot filled 3/4 of the way up with water, bring to a boil, then reduce heat to a simmer, and simmer for about three or so hours, let cool over night, and then pour into a plastic container of your choice, but one deep enough to submerge your leather in. the dye my last rig was done in , I made a year ago, so it doesn't go to waste. when dying I leave my leather in the dye, submerged for 24 hours, then pull my leather out and rinse off with fresh water, if you're doing a belt place the belt on your bench straight or curved as you want it, when dried it will hold its shape pretty well, same with your holster, but you want to mold the holster to your gun at this time, let dry 24 hours, then condition with Lexoil conditioner, and after an hour , you can start oiling with either EVOO, or Neatsfoot oil, you will find you can vary the depth or darkness of the leather by the amount of coats of oil you apply, when you get it the way you want, let it dry over night, if it still looks the way you like it, you can either use Skidmores leather cream or use another sealer finish or nothing at all, that's open to you, or make it darker by applying more oil.
Thanks, I'll make it that way, then. Maybe a small steel wool pad (no soap type).
Good carving, AC. You're getting the hang of it fast. The lacing does them well, too. Nice wallets. Great looking kids. ;)
Nice looking slide, Ned. Those all brass shells sure look nice, too. Thanks for the detail shots. I like the way you used the top layer for a stop without just sewing a strip along the bottom of the loops.
TN, those holsters really are nice. The simple design looks good with the slightly darker two-tone finish.
BH, that derringer rig looks good. Small, but quality just the same. Good job.
Very nice loading strips, Ned, BH, TW. I like features on all of them. I use a chamois gold bag but may have to try one using some of those ideas.
-
Howdy TW,
Looks like a well thought out and very practical design. I like the detachable feature. Many thanks for sharing your talents and expertise with us.
-
TW thats a great job you did on slide. Quit knocking your work. Looks good like all of them. KT
-
Thanks, Will, Johnny and Kid Terico, your kind words are always appreciated, the quick disconnect on this carrier does make it easy to take your ammo to the table and load and replace on the belt.
tEN wOLVES :D
-
Here is my first pair of saddlebags, I´m finished them yesterday :)
The cosumer paid $383 for them, maby I´m to cheap, its hard
to set price on the stuf :-\
But most important, he was awfully satisfied 8)
-
Beautiful work Bob, worth every penny.
tEN wOLVES :D
-
Great Lookin Saddle Bags Bob......
AC
-
Hey Bob,what the heck is that on the wall next to the saddle bags which are very nice by the way. :-\
-
TW, I really like your idea for attaching the loading strip to the gunbelt. I might have to "borrow" that idea, if you don't mind.
Boothill, very nice work!
-
TW, I really like your idea for attaching the loading strip to the gunbelt. I might have to "borrow" that idea, if you don't mind.
Mongo, it's not my idea, I got from some one else, so feel free to use it. :D it's a really user friendly way carry your ammo.
tEN wOLVES :D
-
Bob Thats some fine looking bags your a showing us. Customer should be more than HAPPY with them. KT
-
Howdy Bob,
Your customer should be very satisfied. That is an outstanding set of Saddle Bag's. The workmanship is excellent and he got a real bargain in the deal. So far I've made three set's of bags so I'm fully aware of the time and care involved to make a set. Thank you for sharing them with us.
-
Very nice saddlebags. I like the stamping on them. Good work.
-
TW, very nice strip and like Mongo said thats a great idea for hanging them on your belt
Bob, those are some beautiful saddlebags. Great work,just great. I have only made one set in my life and It is sure a lot of work.
-
Howdy BHB
Great job on the saddlebags. Way too cheap.
WC
-
Beautiful BHB! Very nice details around the straps on the flap!
After I built my first set of bags, I swore to NEVER make them again. I had a guy ask me what I had to have to make him a pair, so I threw out a high number.... I dont think it was high enough, as he is still thinking about it..
But, back to that Never make them again comment... I already have the next set planned out, and am just awaiting funds for the leather! ;)
DM
-
After I built my first set of bags, I swore to NEVER make them again.
Ha, I felt the same way. The hand sewing alone...
Great bags. The color and stamping work terrifically together!
-
I agree with WC, WAY too Cheap! Outstanding bags BhB
-
Tanx all for your nice words.. Ok i´m toooo cheap, even my wife thinks so :-\
So now I have raised my prices a lot. Its so hard to set the price for the work,
I looked on Will Ghormleys webside and took his prices, it was the easyest way,
I hope that I´m not to expensive now. But there is not many holsterbuilders
in Sweden, so the competition is low ;)
-
Nice work, Bob. I hope to have a go at saddle bags sometime.
This is the first time I've posted carved leather. I'm pretty new to it. This is my second carved holster. The first one went in the 'oh heck' bin. But boy is it ever addictive...
-
Beeeeutiful holster Skeeter, I like the color and the pattern, I want that pattern to :-\
It was fun making the saddlebags but its a lot of work, I raised my price to $575 if I´m
gona do some more bags like this one.. I want $479 without Tooling and border.
JD, Are U satisfied with my new prices ;)
-
I´ve showed a Dresbelt pattern a wileago, now I´ve maked a belt for my self ;D
-
Bob:
Fine lookin' saddlebags. Your customer should be proud to own them.
Skeeter:
Good job on the holster and belt. I like it very much. Has a classic style and look to it. Well done.
-
Howdy Skeeter,
That is one looking fine Rig! The Carving and workmanship are first class! Many thanks for showing it to us.
-
Here I hava step by step on my belt, hope anyone have benefit of it :)
http://www.boothillbobholsters.dinstudio.se/gallery_38.html
-
Boot Hill Bob, nice tutorial, thanks for putting this up, it will be a big to all that are going to try this style on a belt.
tEN wOLVES :D
Skeeter, I don't know what the first holster carving looked like, but this one is a keeper, very nice work all around, and the money belt looks first class too, your stitching is beautiful. WELL DONE Pard. ::) :o 8) ;D
tEN wOLVES :D
-
Boy Skeeter, you did a great job on that holster, something to be proud of for sure!
BhB with the amount of work you put into those saddle bags you deserve the money. If someone asked you to make something like that they need to understand the work involved. You can buy a cheap set of bags on E-Bay and that's exactly what you get: a cheap set of bags. Quality costs money no matter what the product, and you can't buy that kind of quality just anywhere.
Just my 2 cents
-
Thanks for the kind words, pards. The encouragement is worth a lot.
-
Howdy Skeeter
That is a very good lookin holster.Very fine work. Keep it up.
WC
-
Verry good work skeeter thanks for sharing
-
+1
-
Great second carving, and I know the addiction.
AC
-
Howdy All
I go to thinking after the talk about how much work was in the loading strips and not being able to get your money out of them.
I played with a few ideas and this is what I came up with.
No sewing required. One strip of leather for loops on both sides. Not counting my stamping and dyeing time (they would look good plain), I have about an hour in it. The shells are looped through from one side to the other. It holds 11 on one side and 10 on the other.
Here are the step by step pix.
http://s394.photobucket.com/albums/pp25/cowboywc/Loading%20Strip/
WC
-
Good looking rig you got Skeeter. Thanks for showing. WC Great idea and looks like it will work good. KT
-
Howdy WC,
Not only is this Loading Strip a very practical and easy to make design, your tutorial on how to make it is excellent! You have a real talent for teaching. Thank you for sharing it with us.
-
Howdy Johnny
Thank you.
I'm going to do a write up on it and sumit it to the Leathercrafters & Saddlers Journal. We'll see if they accept it.
WC
-
Howdy All
I was in to see Wayne over the weekend, and he had something to show me, it was this loader, of course it wasn't just another carrier, it was two pieces of leather tooled on both sides and cemented together, WC is a whiz when it comes to thinking things out, and this was a good example, and now hes thrown in a tutorial ta boot, I know I told you all that WC is my mentor, and even after all this time, I still am mesmerized by his tooling and carving, his business is like a candy shop to me, and I can just wander around looking and starring at all the beautiful work he has done, I really feel blessed in this way, I just wanted to share that.
tEN wOLVES :D
-
Your lucky to be able to be that close and visit.I remember when i was about 13 -15 and i would go into Bill Enos place and watch him and look around,he was the best around here.I'm gonna post a little video for WC to look at,it's a saddle i saw in a local antique store,i met the lady that owns it,but she doesn't ride anymore.I'd give alot to be able to go see Bill right now.. :-\
-
I know I told you all that WC is my mentor, and even after all this time, I still am mesmerized by his tooling and carving, his business is like a candy shop to me, and I can just wander around looking and starring at all the beautiful work he has done, I really feel blessed in this way, I just wanted to share that.
tEN wOLVES :D
I second this one. Its always a great pleasure to see what WC is working one and even a great one learning by watching it come together. Very glad to have the extreme pleasure of being one of his students!
-
I was in there one time (and met 10 Wolves to boot) and that was enough to make me want to drive almost 1000 miles to do it again!
WC, that is a great design; very practical yet fairly easy to execute, though mine would not look that neat for sure. Never mind the stamping; I’m talking about the cutting process!
Those are great looking stamps WC, could you ID them for us?
Thanks, JD
-
Howdy JD
The Dbl rope Basketweave is from Bob Beard and the 3 heart boarder is from Barry King.
Thanks all for the kind words. This one was fun.
WC
-
That's a very ingenious arrangement, Cowboy - the double sided loops. Great stuff.
This is my next carving piece after the holster I posted. I bought the original when I was eighteen, which is (ahem) a few years ago. It's amazing that it's still usable. But I decided to give it an honorable retirement and make one just the same.
[Dead link deleted by moderator]
-
Skeeter that belt is a fine peace of work ya don good on that one
-
Thanks, Missouri.
[Dead link deleted by moderator]
-
good morning KT, skeeter, BHB, ACE, has ant body hear form MSlick latley??
-
Howdy Guys,
BB, One word AWESOME :o :o :o :o I love those saddle bags!!!!!!!! As you were saying about selling to cheap, I think if you would of taken out the cost of the leather you might of made $2.00 pr hour!!! Those bags are First Class!!!!!!!
Sketter, again One Word AWESOME :o :o :o :o If your rig had any wear marks it would look like it was taken out of Packing Iron, you knocked it out of the park!!!
WC, Way AWESOME !!!
You guys are just tearing things up!!!!!
Later
ACE
-
Thanks Cowboy, Dr. Bob, AZ, Kid and Ace for the encouragement.
-
Skeeter, you are turning out some fine work pard, this belt is a perfect copy of your old one, WELL DONE PARD. ::) :o 8) ;D
tEN wOLVES :D
-
MHB, Slick was on the SASS wire yesterday but that's all I know.
Ned
-
Thanks Ned an't heard much from him latley i reckon hes shooten
-
Skeeter
Very good job on the belt. Keep it up.
WC
-
Nice job Skeeter, looks lovley :)
Here I´, just made a pair of rig bags.. Think i´m to cheap here to :-[
-
Bob,
Those look great! I really like the color.
-
Howdy Bob,
Wow! That's some good looking quality work you are putting out! Thanks for sharing it with us.
-
Nice ammo bags Bob, top notch for sure. ::) :D ;D
-
Bob for the quality of your work that I have seen, you could rasie your prices and no one should holler. Beautiful ammo bags.
Skeeter, love the holster and the belt very nice work.
-
Howdy BHB
Good lookin ammo bags.
WC
-
BhB those are mighty fine looking bags. The color and workmanship are really first rate
-
Great work, Bob.
-
Skeeter, that's a very fine rig. Classic all the way. Beautiful work. The belt is really well done. The tooling is very good, better than the original. Nice work. You have a good feel for it. It is addictive, isn't it?
BH, nice belt. Looks like it'll go with anything. Very nice bags, pard. Those look great.
WC, that carrier is really a good design. Nice idea to alternate the loops so you don't have to stitch any. Very smart.
-
This is a holster for a friend at church; his carry gun (we have a rough church ::) )
He asked for a plain black holster that would cover the trigger. I used a fold over belt loop for a 1 1/2 inch belt, per request. This is my first use of the drum dyed leather WC recommended. It was a different but good experience.
(http://i165.photobucket.com/albums/u51/HarleyPastor/darrellcarry002.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/darrellcarry004.jpg)
-
JD,
He should be tickled with that!! ;D
-
Howdy Skeeter,
Sorry I overlooked your Belt. You did a great job of duplicating the original. Excellent job of carving!
Howdy JD,
Nice neat job on the Holster!. Your stitching is looking good.
Many thanks to you Gent's for sharing your work.
-
Howdy JD
That came out great.
He should be very happy with it.
WC
-
It looks good JD, you did a nice job.
tEN wOLVES :D
-
Looken good JD
-
Thanks for the encouragement guys. It's a pretty Plain Jane look, which is what he wanted, and he wanted pretty much everything covered, so I didn't see a lot of options. He practices at a place that requires all of the trigger area be covered if you use a holster.
-
Good work, JD.
-
Verry nice JD :)
-
Very nice, JD. That should do the trick just fine.
-
JD darn nice job and I like the color. KT
-
Here I hava step by step on my belt, hope anyone have benefit of it :)
http://www.boothillbobholsters.dinstudio.se/gallery_38.html
That's really nice BHB. Geat work! ;D
-
Very nice work JD. sometimes the plain ones are the hardest because their ain't anywhere to hide the mistakes.
-
I have a friend that likes Ike Clanton in the movie Tombstone, so I maked him a
holster that looks like the Ike holster.. He liked it :D
-
Good job BhB, I really like the color.
-
Howdy BHB,
Great job on the Ike Holster! Neat and clean! Your friend will be proud to wear this. Many thanks for showing it to us.
-
BHB very nice job on the holster. KT
-
Tanx pards. the holster is dyed with Antique Medium Brown. I dont like to dye with that color
its tands to "leak" over the edgas and to the backside om the leather :-[
-
It is really hard to keep up with you all.. there is beautiful work going on here.. here are some picts of my latest attempts.
http://i91.photobucket.com/albums/k282/Nihla/leather/102_1478.jpg
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1478.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1478.jpg)
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1476.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1476.jpg)
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1477.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1477.jpg)
I am not happy with the color of the dyed purse so I am starting another one.. hopefully I can improve on it.
:-\
-
This is a holster for a friend at church; his carry gun (we have a rough church ::) )
:D ;D
Nice work, folks!
-
Looking good Helda
tEN :D
-
Ain't been 'round these parts in a while.
Here's my latest.
Pics turned out kinda bad. :-\
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0815.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0814.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0813.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_0812.jpg)
Lots of great talent here fer sure!
~EE Taft~
-
EET thats some fine looking leather your showing. Great work. KT
-
Dang nice leather double E
I don't know Helda that color looks like a nice antique to me :-\ Looks fine..
-
Thank ya fellers.
Helda, as always, it's a pleasure to see such beautiful work.
Keep it up, gal.
-
EET, thats a mighty nice looking rig u have there :)
-
Why thank ya, Pard! You been puttin' out some real nice leather yourself.
Keep up the good work!
~EE Taft~
-
EET it's good to hear from you again, and real nice work by the way. JD
-
Helda
Very nice work as always.
EE
That is a good lookin rig.
WC
-
Howdy All
I was wondering about my loading strip pattern and if it would work for other rounds without having to change the spacing.
I made 2 more, one for 44 and one for 38/357. They both worked out great and didn't have to change a thing.
WC
-
44's
-
38/357
-
Backsides.
-
Bob, Helda, EE, and WC, you all are doing some mighty fine work. Very good.
-
Howdy Helda & EE Taft,
That's some very nice work you have posted. Many thanks for sharing it with us.
-
Helda, when I commented on EET's work I meant to say what nice job you did and totally spaced it. You have some real talent.
WC, those loading strips are way cool, but I'm wonderin about that middle cartridge in the middle strip. That's a wicked lookin dude!
-
Howdy JD
That is a 45-70 blank left over from my stunt show days.
WC
-
Thank You ALL!!..
EET....NICE JOB!! Thats really great.. no wonder we haven't heard much from you.
WC. I love those loadin strips .. ... I would really want one if I was an action shooter.. ;D
JD you always have nice clean work.. I am still working on spacing and hand sewing to make things look neat and orderly.. I am one of those "freestylers" that can't make anything symmetrical even when I try.( All my pictures hang crooked in my house. :o)
-
Lots of nice lookin' stuff on here lately.
Boy, y'all hit the nail on the head about the loading strips takin' a lot of time to make.
WC, I'm gonna have to try your idea. Looks great, Pard.
Helda, you don't need to change a thing. Looks great!!
It's the hand made work style that makes them unique and adds value.
Next up will be to finish the St Jude's rig.
Back to work I go.
~EE Taft~
-
Howdy WC,
Don't know how I overlooked those nifty Loading Strips, must be old age i reckon.
Beautiful work and great designs! Many thanks for sharing this with us.
-
Beautiful holster, BH. Nice work. :D
Very nice work, Helda. I like those recent "attempts."
Good-looking rig, EE. Very good design.
Wayne, I really like that loading strip design. You took a good design and made it simple. Outstanding.
-
Cowboy, those loading strips are very cleverly worked out.
JD, Boothill, EE, Helda - great work. Congratulations to all.
-
Purse for my Daughter in Law is finally done. Solved my lacing problems and it turned out pretty good. Lined it with soft kid skin leather.
AC
-
AC,
You got the carving down pat! Beautiful color too!! Great job. She will love it!!! ;D
-
Nice result, AC. How thick is that leather? I'm curious because I've been tooling leather for a bag and finding it's not thick enough to withstand the work.
-
I believe it is 5/6 oz. Not sure as it was a kit. I had no problems tooling. I have even tooled 3/4 oz without problems.
AC
-
Howdy AC
Very nice job.
WC
-
Thanks WC, it was a challenge, but I prevailed.
AC
-
WOW you Rascal AC, pard you nailed it, it is beautiful, like I said before, you just a natural at this leather work/joy/fun. ::) :o 8) ;D
Well Done ;D
tEN wOLVES ;D
-
Thanks TW, I am glad to be done with all the gifts, now I can concentrate on my next project, the "Hoppy Rig".
AC
-
AC, man your carving has jumped forward, and you were doing pretty good right out of the box! Nice job, I'm sure she'll love it. JD
-
Kind of makes a feller wish he was a girl ::) Looks like you conquerd that lacing problem for sure,VERY NICE AC~~Now what did i do with them pump high heels ;)
-
Thanks JD, Practice Practice I get a little better withe each carving. Rick, the're in by your moccasons.
AC
-
great job AC. Wish my carving was coming along as fast as yours.
-
BHB, beautiful work on the saddle bags the tooling is very well balanced, nice looking holster and pouches.
Skeeter, your leatherwork is always real clean pard good carving good color.
WC, great idea on the loading strips.
JD, plain is good nice functional holster.
Helda, mighty fine leather work you are very creative.
AC, beautiful purse.
EE, that rig looks mighty fast pard.
Wiley ;D
-
Thanks Wiley, It's hard to keep up with the work being produced here by so many talented Pards. If I have missed someone, please forgive me. I get locked into a project and tune everything else out. Ya all are doing fantastic work out there , keep it up.
;D AC
-
AC sorry I,m so late but thats some fine leather work on the purse. She should be tickled to get it. Great job , I really like it. KT
-
Thanks JD, Practice Practice I get a little better withe each carving. Rick, the're in by your moccasons.
AC
:D :D :D found "em" ;D
-
Howdy AC,
Beautiful work on the Purse. You did an outstanding job of carving and lacing!
-
Thanks KT, I really respect your opinion. Rick, your a sick man.......... ;D ;D ;D ;D
AC
-
Thanks Johnny, My daughter in law really likes purses. It's not a Guchi, but close...Ha Ha
AC :)
-
You outta see it from this side of my eyeballs :o ::)
-
Rick,
I'm verrrwy afwaid to try to wrap my mind around that thought! :o :o ::) ;)
-
(jaws movie theme) :-[
-
AC... Verry beutiful work on that purse, I tink that she´s gona be sooooo happy ;)
-
Thanks Bob, your doing some awesome work also.
AC
-
One last wallet to show. I figured since I made something for everyone else in my family, I should treat myself to a new wallet. My old one was falling appart.
AC
-
Lately I have been making a few patterns using the book Packing Iron as a go by. Here are two of my latest holsters I hung them on the same money belt as you can tell. ;D
Wiley
-
Great representations Wiley. Beautifull work. You nailed them.
AC
-
There ya go AC and you can pat yourself on the back while your at it,real nice wallet~
Always did like a fancy skirt on a holster..I like the stars on that top one,lookin good~
-
AC,
Great carving and colour! ;D Gotta take care of yourself once and a while!
Wiley,
Mighty fine looking holsters. The belt is great too!
Pards, thanks for sharing your fine work!! ;D ;D
-
WOW you pards have been busy this weekend, AC, beautiful wallet and the carving is top notch too. :D
Wiley , your holster looks right out of Packing Iron, beautiful work pard. ::)
tEN wOLVES :D
-
Thanks Pards, the Sheridan book I am studying, says practice practice, practice.
AC
-
Howdy AC,
Beautiful job on your Wallet! When you use it and are asked where you bought it, you can proudly say "I made it".
Howdy Wiley,
Beautiful work on those Rigs! They would look right at home on the pages of "Packing Iron".
You Gents should be very proud of your work. Many thanks for sharing it with us.
-
Beautiful job on the purse, AC. Your daughter should be tickled with that one.
Oh, yeah, Wiley! Very cool work. You do PI justice. Thanks for the pics.
-
AC, once again you've nailed the carving. Man, that looks great!
Wiley, your rigs look real authentic, right out of the old west. Nice work
-
Great lookin' stuff, fellers. All the way around!!
~EE Taft~
-
Howdy AC
That wallet is a Dandy. Keep up the great work.
Wiley
I like those holsters.
WC
-
Wiley, I really like those rigs. They are authentic - they haven't been cut down or adapted for fast draw. Those half-skirt holsters from Texas shown in Packing Iron look terrific, don't they?
Yeah, I know we're into fast draw: it's hard to square the circle.
Here are some plain Janes from The Book....
-
Howdy Skeeter,
You might call your Holsters "plain Jane's" but they sure do have a classic and elegant look to them. Excellent workmanship! Many thanks for sharing your work with us.
-
Skeeter, those are some nice looking holsters, all of them are first class. ::)
tEN wOLVES :D
-
Skeeter, those are fine looking holsters. The color and workmanship are both great great. What kind of leather are you using there, as far as color, brand and weight? Thanks!
-
Thanks Johnny, 10W and JD.
JD, it's ordinary veg tan leather from Tandy in 8-9 ounces, a weight I like the most. I use 9-10 oz. for belts. There's nothing on it but EVOO and sunshine.
I find the quality from Tandy very variable. Sometimes I have to look pretty hard to find one good hide.
-
Skeeter some nice looking holsters your showing. Keep them comming. KT
-
AC, you've got that leather carving down pat great looking wallet.
Skeeter, very well done pard I admire your leather working skills, Iike you, I sure favor the old style.
Thanks to all of you for the compliments on the holsters and belt made my day. ;D
Wiley
-
Skeeter, those holsters are great. I like the simple elegance of a good holster without too much decorative work. Yours are very tastefully done. Good work.
-
Howdy Skeeter
First class on all them holsters.
WC
-
Skeeter,
Great looking holsters! I like the plain ones a lot! The stitching looks great too!
-
Thanks, pards, for the kind words. Skeet
-
Skeeter, sunshine, oil, AND someone doing a Great job of application and attention to detail.
-
Skeeter, you nailed the look in my eyes. Way to go.
DM
-
Skeeter you really have the knack. Those holsters are elegant in their simplicity.
AC
-
Nice work, Skeeter. Simple, classy and authentic. A nice representation of period styles.
-
Thanks again to all for the nice comments.
Great work from Gun Butcher!
-
AC, Wiley , Skeeter , I musta had a senor moment, I completely missed your posts somehow.
AC, practice is surely making perfect in your case. Great job on the wallet.
Wiley and Skeeter, you both nailed my favorite style. Simple, classy and well executed.
-
AC your wallet and that purse are so nicely done.
Skeeter Simply beautiful..
Wiley.. A very nice job.
Pretty stuff here folks!! Thanks for sharing . I finished another purse today I didn't have time to take apicture as the lady picked it up as soon as I was done... and another one is ready to braid. I have one more to go.. then I can work up something for me. :P
-
GB and Helda thank you for the compliments much appreciated my friends.
Wiley ;D
-
Saddle horn bag . Some thing different for me. KT
-
Kid may i ask it lookes to me like a sadle holster rig for atachen to the salde horn am i right?? its ausom
-
Very nice, KT. I like the design. It looks to be very functional and useful on the trail.
-
Mussouri H B You are right. KT
-
Now that is COOL, KT, you did it again pard. ::)
-
Howdy KT,
Beautiful!
Your range of designs and your versatility never ceases to amaze me. Many thanks for sharing this with us.
-
Verry nice KT :)
-
Good to see you producing great work, Kid.
-
Reall cool KT!
-
Very cool.i know some bikers that would like a set of those :)
-
Thanks for all the nice comments. Its means a lot comming from a group of Leather Smiths all with lots of talent like your selves KT
-
Great work!
-
8) Cool lookin Pommel Bags KT, great look.
AC
-
Santee,,AC thank you. KT
-
Ah, KT you have the touch my friend very cool.
Wiley
-
Kid, I guess an ol dog can learn new tricks ;)
Very nice job on that rig. I like it a lot.
-
MHB, regarding your pattern request, I know I don't have anything like that, but hopefully someone will come along side to give you a hand
KT, it's great to see you puttin out leather again, and right up to your excellent standards. That saddle hone set looks outstanding
I hope you feeling better. God bless, JD
-
JD my friend thank you. Little by little. KT
-
;D
-
Howdy pards..
Here I´ve made a loadingblock (prototype). I think those are better than loadingstrips, easyer to
load whit it when the cartridges "pops up" :D
-
More pics :)
-
Nice idea Bob, I can see where this would work very well at the loading bench, you did a great job on these, well done pard. ::) :o 8)
tEN wOLVES :D
-
BH, that's a good design. Very functional and simple to make and use. Good work on the tooling, too.
-
BB great idea. Nice job. KT
-
KT
Nice bags.
WC
-
WOW Kt.. super.
and BHB what a great idea and done superbly!!
Here is the finished purse #3 also known as The McKinley.
URL=http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1574.jpg](http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1574.jpg)[/URL]
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1577-3.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1577-3.jpg)
-
BhB, I like that design, very cool. Nice work oin the stamping carving too.
Helda, good lookin bag FOR SURE
-
Helda, awesome bag, between you and Annie you gals are putting out some beautiful pieces, keep up the great work, and thanks for sharing with us.
tEN wOLVES :D
-
Cool bag, Helda. Looks really good. Very nice work.
-
HH thank you and the bag is beautiful. My wife loves it. KT
-
Kid that saddlehorn rig is , as the kids say these days"Off The Hook!!" ;D ;D
-
Howdy BHB,
That a pretty nifty design you have there. Nicely done!
Howdy Helda,
Beautiful work on your Purse's! A genuine pleasure to look at.
Many thanks to you Ladies and Gent's for sharing your work with us.
-
Thank you everyone!!. I am starting on another one today maybe see if I can add a little bling to it. :o
-
HH NO BLING. I dont like BLING... :D ;D ;D ::)KT
-
KT,
Did yer nose bump the screen when it shot out when you typed that?? ??? ::) ;D ;D
-
DR. Bob Quiet, maybe she dont know. :D :D :D KT
-
Sorry KT but I know the truth!! 8)
-
HH NO BLING. I dont like BLING... :D ;D ;D ::)KT
Yea and a Diamond doesn't shine in a goats uhhhhhhhhh,,,ear, yea, ear..... ;D :D
-
"The truth is out there." - Fox Mulder, FBI.
"Sometimes it's further out there than you'll ever know." - Forty Rod, DBS.
-
I'll bet KT has spots on his computer screen ;D ;D ;D ;D ;D
HH, great job.
AC
-
HELP! :o I'm seein spots@@@@@@@@! Have ya seen a doctor??????? :-\
No just spots @@@@@ :D :D
-
Rick,
Yer way toooooo far away for me to make a house call!! Take in a burlesque show and call me in the morning! ;) ;D ::)
-
:D
-
Boothill, that is some great carving and a very nice design.
Helda, beautiful job on the purse. Really first rate.
-
Dr. Bob , AC and GCR Love your sense of humor.. ;) KT
-
GB, I just saw those horns over on the other post WOW beautiful work cowboy you are talented.
BHB, right when I make my first loading strip you start making loading blocks what's up with that? Nicely done pard! ;D
Helda, mighty purdy purse.
Wiley ;D
-
LOTS of REAL nice work folks!!!..........been real busy in the shop so have only recently had time to peruse what's been going on...two thumbs way up!
Here's a piece I did for Deb Mann, wife of knifemaker Mike Mann of Idaho Knife Works - the knife is one of his special HBC styles with a Damascus blade and Mammoth Ivory grips - Deb wanted lots of fooferaw so that's what she got.......
(http://www.wrtcleather.com/1-ckd/1-2010/IKW-mann-hbc-2010-2.jpg)
(http://www.wrtcleather.com/1-ckd/1-2010/IKW-mann-hbc-2010-1.jpg)
(http://www.wrtcleather.com/1-ckd/1-2010/IKW-mann-hbc-2010-3.jpg)
hasta manana los muchachos y muchachas............
-
Way cool Chuck!! You da man!!! ;D :o ;D
-
Any chef would be very happy with that , thats ausom knife sheth, or as my dauther would say way cool,
-
Muy bonito ombre :) :)
-
Chuck, great job man. I really like your beadwork, it is always first rate. Like that horn also, is that one of yours?
-
WOW, Let's hear it for the Fooferaw! Awesome work Chuck, Thanks for taking time to share it.
-
Chuck, great job man. I really like your beadwork, it is always first rate. Like that horn also, is that one of yours?
Glad ya'll like the look see! got more to post, but have to "develop" my photos and the shop keeps a calling!!!!
GB - that horn is an original - dated 1791 and again 1825 (and it's my keeper!)....here's a couple of other images....
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-horn-1825.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-horn-1791.jpg)
(http://www.wrtcleather.com/1-ckd/1-2009/chucks-horns-2-2.jpg)
The small horn is one I made and scrimmed about 40 years ago - time does sure fly.........
By the way do you know about Scott Sibley's book on making horns? He and his wife Cathy are two of the top makers and scrimmers today and the book is an excellent one.
Anybody interested in horns IMO should check out - the following:
http://americanlongrifles.org/forum/index.php - The Accoutrements section
http://contemporarymakers.blogspot.com/ - be sure and look back on teh previous months
http://longrifle.ws/ - check back frequently
http://thehornersbench.proboards.com/index.cgi?
http://www.hornguild.org/
-
GCR,
Nice looking horn! ;D
-
Beautiful sheath, Chuck. I like the fooferaw, too. That horn is totally fascinating. Real history, there. So cool.
-
Chuck, thanks for the links. I'm sure I will enjoy them. I have been following Scott and Cathys work for many years. they are top drawer no doubt about it.
Well heres another rawhide sheath for you. I made this one for an old green river knife that I put new handles on last week.
It is a rawhide body and is laced with rawhide.
-
GB, this sheath and knife are cool, nice work all around, and I like the bead work on the fringe, it's a accent.
tEN wOLVES :D
-
GB you son of a gun, thats some first class work. Great combination of leathers and beads.Nice knife. KT
-
I'm startin to grow a likin for them Green River Knives,dang GB you do all kinds of stuff :-\ :) That's way nice!
-
Howdy GB,
Another fine work of art from your workshop! Many thanks for sharing it with us.
-
Pards, youall are the best. Thanks for the kind words and for looking.
-
GB, you are really puting out some fine work there. That is very classy looking.
-
GB, that's a fine sheath. That rawhide does have the right look for that knife. Nice work, pard.
-
Thanks Marshal and JD. If anyone ever had one of the Green River knifes they will know what I mean when I say its done a little of everything ;D
-
You bet, I've got a "camp" blade that gets used everyday in my kitchen.
Ned
-
GB, ya did it again beautiful knife sheath pard.
Wiley ;D
-
Great work GB, your very talented pard.
Just finished this birdshead hunter up.6 1/2" aged and etched 1095 blade, cocbolo handle.The sheath was setup for gunbelt, and also given a stud for inside the belt or boot carry.Although not needed I added a buckskin thong and antler for retention, which can be removed if desired.Dave :)
-
Sleek man,way stylin :)
-
Howdy Dave, that's a fine looking sheath, I like the tie down, there are so many way to use antlers and bone to make thing special, that knife is a beauty too, you do really nice work.
-
Dave great job on the knife and sheath. I like the versility of the sheath.. As always you do nice work. KT
-
Howdy Dave,
Excellent designs and workmanship! The Sheath & Knife really compliment each other. Thank you for sharing this fine work of art
-
Beautiful Dave!
Ned
-
Once again you are the Man Dave! That knife - sheath combo looks exceptional
-
Howdy Dave
That is a good lookin knife and sheath.
WC
-
Dave beautiful work as always pard. If you don't mind me asking is the belt loop part of the back piece or is it separate and sewn to the back piece?
Well not long ago I showed a holster like this and a pard saw it and wanted a rig so here it is. This is a strong left side with a cross draw. You may remember ol WC helped out on the proper way to do corners with this meander stamp...so check out these corners...thanks WC.
Wiley ;D
-
Great looking rig there Wiley! I like it BIG time!! ;D ;D
-
Well done Wiley, it has a classy look to it, I can't make out the meander, but I'm sure it looks good, these eyes of mine aren't what they used to be, you also got a nice color on it too, good style, I like it.
tEN wOLVES :D
-
Thanks pards.Nice looking rig there Wiley, and in answer to your question the beltloop is seperate and sewn to the back.Dave
-
Great job Wiley. Put together really nice. KT
-
Beautiful job Wiley! Thank you for sharing it with us.
-
Nicely done!
-
Dave, that is a mighty pretty knife and sheath. I like the way the belt loop mirrors the guard on the knife.
Wiley, that is a great job on that rig. I always like the simple decoration and that one is classy.
-
Overall a good looking rig Wiley, but like 10 Wolves, I can't see much detail either. A little bigger picture would help show the detail that from the view we have looks real good. I agree with the other comments on color, I really like it.
Thanks for sharing
-
Thanks to all of you for the nice comments much appreciated. This one is for TW and JD.
Wiley ;D
-
Here is the first holster i have made
I copied it from page 138 in Packing Iron for a 7 1/2" Colt SAA .
I am getting to grips with the problem of the work sucking up to much dye by trial and error....this one is a partial error as it is a bit dark so i aged it a bit using Chucks aging technique.
Sorry about the gun,but is the only SAA i have at the moment so i use it when wet moulding
Cheers
Django
-
Django, very nice work, and for your first holster it is very well made, looks like you've been doing this for some time, it looks very professional to say the least, keep up the good work, and thanks for sharing.
tEN wOLVES :D
Wiley, nice job on the meander, I can see this picture much better, Thanks
tEN ;D
-
Dave, great knife & sheath, Wiley, good lookin rig. Django, thats what they looked like in the old west. Great job.
AC :)
-
Djanjo,
Great looking holster. A real classic look! I like it a lot!! ;D
-
Django, thats a verry good looking holster, clean and nice.
Good job pard.
-
Django, the design, leatherwork and coloring are all very nicely done.
Wiley
-
I took some more pics of my work that i just finished.
The first is a holster i copied from page 80 Packing Iron.
The second is the scan i copied from.
The third is a pic of all three including a "Slim Jim".
Django
-
the scan
-
All three.
I hope you think they are OK for a newbee!!
Django
-
Howdy Django,
That is some great looking work you have posted there! As Dr. Bob said "A real classic look". Thank you for sharing it with us.
-
Django, these holsters would be nice if you had been making holsters for years, let alone your first, beautiful work, you have talent, stay with it and keep them coming.
tEN wOLVES :D
-
Thanks for the encoragement folks!
TW, the only experiance i have is that when i left school i started tailoring at a London college for a couple of years.
I have learnt from bad experiances to bug people and ask plenty of questions about "how to do", basic tools etc before wasting money and time on the wrong items and advice!
It looks as though i have come up trumps with this excellant friendly site, so thanks to all the members i have "bugged" who have got me this far, i'm loving the hobby , It's not cheap starting out in the UK though!! :) !!
I have just recieived some stamps, spots etc from Tandy (another blow to the bank balance!,don't tell the wife)so the next project is the loop holster on chucks DVD.
I will only be making authentic period leatherwork 1840-90 as my hobby is reenactment camps and all things related .
I will go to my local club and see if anyone on "the dark side" (line dancers)are interested in buying non period leatherwork though ;D!!
How much , ball park should i be looking for?PM me if this is a taboo question!
Cheers
Django
-
Django, I sent you a PM
-
Very nice work on that knive and sheath, Dave. Very cool to have both the stud and the belt loop.
Wiley, that rig is really outstanding. The meander corners are done nicely. It looks very good in that color, too.
Django, your holster is very authentic looking. Very good work on that one. The color is nice, even though it may not have been your first choice. The other two are just as great. You can't claim the title, "newbie" anymore. You're beyond that. Very nice work. You're working in my favorite era for leather. Keep it up.
-
Very nicely done Django. Good clean and well executed look. you are well on your way ;) ;D
-
Great work, Django. You're producing some terrific holsters already.
-
Django, ditto on what everyone else has said. You remind me of Arizona Cattleman; he came to the forum "new" to leatherwork and then proceeded to do some great work right away. Amin Ledbetter did the same thing.
In the first post I'm wondering why you apologized about the SAA gun. I can not see any reason to to apologize for anything unless I missed something (which happens more often that I'd like)
You've got two of the most important things any budding holster maker could have: Packing Iron and Chuck's Burrow's DVD, so you're certainly pointed in the right direction!
Keep on hittin that dead cow hide, JD
-
Django, ditto on what everyone else has said. You remind me of Arizona Cattleman; he came to the forum "new" to leatherwork and then proceeded to do some great work right away. Amin Ledbetter did the same thing.
In the first post I'm wondering why you apologized about the SAA gun. I can not see any reason to to apologize for anything unless I missed something (which happens more often that I'd like)
You've got two of the most important things any budding holster maker could have: Packing Iron and Chuck's Burrow's DVD, so you're certainly pointed in the right direction!
Keep on hittin that dead cow hide, JD
The gun is an old "pot metal" wallhanger..still it does the job when wet moulding.
Thanks again for the enthusiasm and help from everyone on the forum
Django
-
Smart move to use a non functioning gun to wet mold whenever possible as far as I'm concerned. No need to worry about rust.
-
This is a new holster. I've shown the belt before....
-
Mornin' Skeeter,
Beautiful! That is a clean & neat looking Holster coupled with excellent workmanship. Thank you for showing it to us.
-
Skeeter nice looking rig. Some great workmenship. ;) KT
-
Skeeter, you have really honed your craft, this is one good looking rig, that money belt came out great, and I've always liked a 3/4 skirt on a long barreled gun, your tooling is beautiful also.
Thanks for sharing, and keep up the great work ::) :o 8)
tEN wOLVES :D ;D
-
Django:
Very nice work, pardner. No newbie status IMHO. All three have a classic, authentic look...and I consider that the highest compliment I can give.
Skeeter:
Ditto the above. Super clean, classic, well-executed period look. Doesn't get any better than that.
-
Skeeter, your work is great. That holster is beautiful and the belt is a good match for it. Truly fine work.
-
Thanks, pards. I appreciate the kind comments.
-
Howdy Skeeter
That is one fine lookin rig.
WC
-
Skeeter, thats a fine looking holster and belt. Your carving/stamping is outstanding, and the balanced color is top notch. Keep them comming.
AC :)
-
Skeeter, that dude is cleaner than clean could be, really sharp.
-
good work Skeeter i can see some old cowpoke down kansas way about 1870 wering that rig. he's got a big smile to!
M.H.B.
-
Thanks pards. I appreciate it!
-
Thanks pards. I appreciate it!
Very nice skeet,...one day....!!
Django
-
Hey, Django, you're a quick learner. Your work is already good.
-
Skeeter, that holster almost got by me another bang up job purdy mighty purdy.
WD ;D
-
Nice job Skeeter.! Yours too DJANGO!! Everyone here is keeping me motivated!! Thanks.
I just finished a purse. I will get picts up this evening.
-
Ok Here is the pictures
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1586.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1586.jpg)
(http://i91.photobucket.com/albums/k282/Nihla/leather/th_102_1583.jpg) (http://s91.photobucket.com/albums/k282/Nihla/leather/?action=view¤t=102_1583.jpg)
Same thing only different ;D
-
Beautiful bag Helda, your carving looks great, and your lacing is awesome, your friend will be happy as a lark, thanks for the look see.
tEN wOLVES ;D
-
Helda,
Wow!! Beautiful work. ;D
-
Great work, Helda.
-
Helda
Very Nice
WC
-
Helda,
Beautiful work!
-
That's a mighty fine bag there Helda. JD
-
Thanks!
I added a little bling for KT!! It takes me forever!!
-
Helda your purse turned out really nice.
-
Really nice work ,your carving and lacing looks great Helda.
-
Thank you everyone. You all are so professional it means a lot to get so many nice posts.
I was worried that the Fillagree part of the purse would be too weak so I backed it with two pieces of leather and a piece of plastic in between. I hope it works!! does anyone have a better suggestion or idea?
-
Helda, art in leathercrafting it's all good!
Wiley ;D
-
Well, pards here is my attempt at a bandelero. It is supposed to carry 45/60 cal. rounds but I only had one to work with so the rest are 45lc as you can see.
Wiley ;D
-
beutiful work Wiley, love the concho and the stamping.
//BhB
-
Great job Wiley. Keep up the good work. KT
-
I am watchin Pauncho Villa dvd right now with Antonio Banderos,pretty good flick.
Hey KT how ya feelin today?
-
BHB and KT thanks for the compliments pards.
Wiley
-
Very nice Wiley, it really looks sharp. ::)
-
Great result, Wiley. Keep it up, pard.
-
Howdy Wiley,
Beautiful job on your Cartridge Belt! Looks like it will do the job quite nicely.
-
wOW Wiley thats very nicely done!
-
Very nice job, Wiley, looks good.
-
Thanks to all you nice pards for the kind remarks much appreciated.
Wiley
-
Nice clean looking work Wiley. Great job on the loops and the stamping, very professional.
-
Helda, really good work on the purse. The colors do it justice, too.
Beautiful belt, Wiley. Good job on those loops. One 45-60 is the right number. 8)
-
GB and Marshal thanks pards much appreciated.
Wiley ;D
-
Wiley, what a nice job!
-
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_1452.jpg)
(http://i881.photobucket.com/albums/ac20/EE_Taft/IMG_1451.jpg)
Here is some of my latest work. These are on their way this morning to the St. Judes shoot in Monmouth Ill.
they will be one of our donated items for the raffle. There are two of these in a double strong side set up.
Haven't had much time to post lately. I hope all are well and still punchin' out the purdy stuff.
Regards to all of our CAScity friends.
~EE Taft~
-
Howdy Mr. Taft,
Beautiful job! Some lucky winner will be very pleased with these Holster's. Many thanks for sharing this with us.
-
EE Taft ya done whent and done it again thats one sharp holster ther one of thes days ya gona ha to tell old MHB how ya do that two tone and basket wheve to work. very good work pard. but then weve come to expect this kind of work from you.
Have a good long weekend
Missouri Half Breed
-
EE Taft nice job on the holster. They will do very well at the raffle. Heres one I just finished last night.
-
Nice holster EET, the winner will be stoked for sure 8)
KT, another beautiful holster from you also, good looking carving, and a very classic style, well done. ::)
tEN wOLVES ;D
-
KT old buddy thats just down right stuning
-
And here i thought you was sick KT,that holster is way sick though ;D
-
How do ya do it KT,how do ya do it,if i could bottle it ,i'd be filthy in it...
STEP RIGHT UP FOLKS GET YOUR KT SUPERVIDADRINK,1 6 OUNCE BOTTLE A DAY WILL HAVE YA DOIN WHATEVER YA SET YOUR MIND TO,ASSERTAINING YA HAVE A MIND IN THE FIRST PLACE,THA'TS RIGHT ONLY 19.99 ACT TODAY AND I'LL TIMES 1 AND ONE HALF THE ORDER!!
JUST LOOK WHAT THIS SICK GUY DID AFTER 1 BOTTLE AND HE SKINNED THE COW HIMSELF! ;D
-
Howdy Terry,
Awesome job of Carving and design. Another great example of your versatility. Many thanks for sharing your talents with us.
-
Thanks to all of you for the nice comments and have a great weekend and Rick old friend I would quit but you keep HEN pecking me. KT ;) :D ;D ;D
-
Terry What a good friend ya are to all. ya share your tips and do for the poor God will bless ya when the time comes pard. and may the great sprits gaurd your camp
-
EE Taft & Kid Terico, ya'll sure have some talent there! Those are two examples of mighty fine work.
Wiiley, your bandoleer gave me an idea to help a pard here who just bought a Circle K bandoleer with loops for a 12 G and 45 LC. It's sewn together on the bottom, and sticks out pretty bad. That and it'a a little tight on him. Monay I'm going to take it apart and add a large Concho on the bottom, and make sure it's able to swivel a little bit.
I figure I can always sew it back together if it doesn't work right.
-
Great lookin holster KT, I need to get back at it myself.
AC
-
Looks really good, EE. Dying around the stamping is a nice tuch. Yep, someone will be happy with those.
KT, that holster is very good-looking. Nice two-tone on good stamping and classic lines.
-
KT I love the look of that holster... I was watching Bonanza the other day 8) and was looking at Adams rig.. it looked a lot like that. Pa had a simular one. I love the two tone floral!!
EE.. beautiful as always.!! :-*
-
EE, very nicely done great touch on the coloring.
KT, Nice carving pard and I like the two tone.
JD, thanks. I made it where it will swivel on the concho.
WD
-
EE, great job on those holsters. I really like the way you dyed them.
Kid, you been holding out on me. I thought you said you couldn't carve. That is some beautiful work my friend. I love the color and the whole thing is just very well designed. Outstanding work.
Now the next question is , are you gonna make a set and a belt ;) ;D
-
GB just the belt. I started the holster and belt about 15 months ago and I am still tyring to finish it after being sick so much. Taking very long.It will probley be my last carving. KT
-
Well, I hope that isn't true. It is some beautiful work and I would hate to think that you aren't going to do anymore. But I guess I understand, I sure can't seem to get started on anything or finish what is alreay started.
-
Been feeling the same GB, did get started on the Buscadero rig this weekend, guess it boils down to just doing it, once I started I semed to get back in the groove.
AC
-
AC and GB your still young and do great work, dont stop till you have to because of health reasons. :) KT
-
KT, if that's what you do when your sick..................... then I'm just gonna quit now!!
BEAUTIFUL JOB!!!!!!!!
Thanks all, for the comments. Just got back from shootin' up a storm at St. Judes. MAN WHAT A BLAST!!
A newer shooter won the rig and was well pleased. The second rig will be a custom design. A young feller won it.........
12 years old and he whooped my BUTT!!!!!! He's gonna be one of the best one of these days!!
Hats off ta y'all
Nighty night.
~EE Taft~
Oh, and Helda :-* back at ya. ;)
-
Thank you all for the nice comment. Great comming from artists like yourselves. KT
-
Nice work being done Pards. Keep it up.
WC
-
This is my start on the Buscadero Hoppy inspired rig. It will have white leather bullit loops, and perimiter white lacing.
AC
-
AC, that's going to be one spiffy looking rig when you're done with it, thanks for the preview. ::)
-
My favorite style :) That will be kewl!
-
AC great start , keep going. KT
-
Looking great AC. Cant wait to see it finiched
-
Yeah, keep takin' those photos!
-
Looks good, AC. It'll be cool when finished.
-
Nice, AC. I have happy memories of those old oaters at the Saturday matinee....
-
Thanks Pards, more pics this weekend.
AC
-
Lookin real good AC.
Wiley ;D
-
Here he comes,here he comes
Arizona Cattleman~~
Here he comes,here he comes
Ridin tall in the saddle man~~
That new rig is a dandy
six gun cowboy candy
Here he comes,here he comes
Arizona Cattleman~~~~~~~~~~ ;D
-
Way cool AC.
That's gonna look great.
WC
-
AC, that rig is gonna be a good one. You have a great start on it .
-
Thanks Pards, Rick your a poet, and your feet show it, The're "Longfellows".
AC
-
Feller outta have a song~~ ;D
-
Here are some updated pics.
AC
-
Couple of more ....
AC
-
Very nice AC, well done pard, I think Kid Terico, would like this one. ::) :o
-
AC__Hoppy thats some very nice work your showing. KT
-
Thaqnks TW and Terry, I still have lots of work still to do, got to line the back of the belt, then lace it. Then I still have to make two holsters. I think I'll be working on this one for a while.
AC
-
Oh boy oh boy,i'm startin to drool..KT you better watch out.
KT's out front by a head but Arizona Cattleman is bringin up the rear for an advance,AND THERE HE GOES LADIES AND GENTLEMEN MAKIN HIS MOVE !!--------------------
______________________________________
====================
And there's Banana comin up through the bunch,it's gonna be tight pilgrims!
-
AC, your Hoppy rig is really looking nice, an excellent job!
-
Thanks JD, and Rick, got a long way to equal KT, he is the "King of Bling" but thanks for the confidence. I'll keep trying.
AC
-
Howdy AC,
Your lookin' good. Can't wait to see the finished rig!
-
Here's a new rig. The same Frank Meanea tooling pattern as before but this one's for me coz I'm a southpaw. The money belt is 2.5 inches wide, Loops are sewn individually.
-
Another pic...
-
Beautiful work Skeeter. The caving is great and the color looks perfect.
-
Howdy Skeeter,
Mighty fine work! Very clean, neat and professional looking! Excellent workmanship! Many thanks for sharing this with us.
-
Fantastic work Skeeter, i love it!!
What brand and type of colour did you use as i would like to achieve this eveness and depth.
Did you colour before stitching?
Thanks
Django
-
Some great looking leather work your doing Sketter. Thanks for showing. KT
-
Thanks, pards. Django, there's no dye on this rig. In fact, I've more or less stopped using dye. It's too much of a PITA. It's just EVOO and sunshine. You can finish off with Skidmore's for a richer effect. In Packing Iron you see the occasional dyed rig, but for the most part they were left au naturel. Just time, sun and use gave them that beautiful amber color.
-
Skeeter I think you have this leather thing down, beautiful rig, it looks professional all the way, and then some, your carving really stands out, being a lefty my ownself, I really like it, and those money belts are the most comfortable gun belt you can wear, great job of sewing the bullet loops also. ::) :o 8)
Well done Pard
tEN wOLVES :D
-
Skeeter,
Awesome! I like every thing about that rig.
-
Skeeter, beautiful leatherwork a real beauty!! :) ;) :D ;D
Wiley
-
Skeeter
That is very nice work.
WC
-
That is very nice Skeeter! I wish I could get the knack of EVOO down! I can't seem to get the leather an even Amber color when I do it! I love that color on it!
-
Nice work Skeeter, love the stiching job. I can never seem to keep my thred clean.
AC
-
Beutiful Skeeter, verry nice stamping and carving. Love the color :)
-
Skeeter, I've got to echo Mr 10 Wolves (and many others) in saying you have this down! The color is flat awesome, and the rest of the work is great too.
-
Thanks, pards. Your words mean a lot to me. Skeet
-
howdy pards
just wanted to post a pic of the new check book cover that i drew up and carved and then finished it up in sheridan
brown then 2 tone double loop laced
thanks for lookin and enjoy
Cowboy316
-
Wow!! Beautiful carving and lacing. ;D
-
Good work Cowboy!
DM
-
Great carving, Cowboy.
-
AZ C.. very nice Hoppy Rig !
Skeeter... NICE!!
Cowboy, Thats SUper!! I like the way you laced it.. I am going to have to learn that one.
Hugs Helda
-
316 very nice work. KT
-
Nice work Cowboy 316, thanks for the look see pard. ::)
-
Good work, Cowboy. Nicely done.
-
Great Job Tim, that really looks sharp!
Skeeter, I forgot to ask you what the leather weight was on your money belt. I think that will be my next personal project, assuming I can get back in the shop one of these days.
Thanks, JD
-
JD, I use 4-5 oz., though I know some use 3-4. Either is fine.
-
Thanks Skeeter, I appreciate the info
-
Howdy pards..
Now I´ve made a sheath to a friend of mine that I´m pretty satisfied with,
dont like the background thou.. :-\
-
Very nice Bob, is this a behind the back sheath?, I think it looks good pard, your friend should be happy to have it.
-
Yes its a behind the back sheath. It was easy to make but I have
to train on my carving :)
-
Train what?Looks great to me..
But Boothill Bob we gotta get to the next page were on 666 :o ;D
-
Hi, i finaly got round to making the Mex' Loop from Chucks DVD.
Working from a picture its a bit difficult to copy exactly but it's nearly there!!
Have a great weekend everyone.
Django
-
BB thats a great job. Theres nothing wrong with the background color. I like it. KT
-
Django, verry nice holster, I love the color. Great job :)
-
Very nice Django, looks like it is out of the old west.
AC
GCR, got us off the 666..... :o :o
-
Django, you did an excellent job on this holster, my hats off to ya pard, well done. ::) ;D
-
I was lucky enough to get a new rig gifted to me by Kid Terrico and he is doing another for my wife.I'll get more pics when I get hers.KT you did an awesome job, I love it and can't thank you enough pard.Dave ;D
-
Man that is very nice David. KT does some awesome work! He is one of the many artist that frequent this forum who I look up to and admire. That is a super nice rig David! I can't wait to see the one KT is making for your wife.
-
My MY MY,what a bueaty!!! Love those wide belts..The Killer KT did it again!!! :) :) :)
-
Django nice job on the holster. Keep them comming. KT
-
Dave , Kid Terico went the whole nine yards on this one, and it looks great, I wish I was as thin as you, it sure would save on the leather, Kid that's a dandy pard, and what a generous gift, and one I know Dave will treasure.
-
Thanks TW. Your friend . KT
-
BhB ani't nuthin wrong with your carving pal. Django, nice job with that holster.
Dave, that is a nice set up. KT does some mighty fine work, but then so do you!
That is a very nice gift, but then KT is one generous guy
-
Nice work, Bob. He'll be more than happy with it.
Django, that's a great rendering of Chuck's holster.
KT, nice job on Dave's rig.
-
Howdy Boothill,
Wow! That is a beautiful job! Great carving!
Howdy Django,
Excellent work! Isn't that Video a great learning tool!
Howdy Dave,
You are one lucky person to get a rig from a true master.
Many thanks to all of you Gents for sharing this with us.
-
I had to back up a couple pages! I missed Djangos holster and Bobs Knife sheath! WOW guys Those are both awesome!
Django that is a beautiful color on that double loop!
Bob awesome carving pard! Sorry I missed em earlier!
-
Wow, pards! There is some very beautiful work shown.
AC, that rig came out really good. Nice work.
Skeet, your tooling is really good. I like the uncluttered look you get with the slightly less busy full coverage. That's a hard balance to achieve. Top-notch.
Nice work on the wallet, Cowboy. The two-tone lacing is a good look.
BH, your sheath looks very good. The background may not be what you wanted, but it really looks good with the subtle change between the objects. The color is really fine.
Django, that holster is clean and attractive. The spots on the strap work well. Looks good.
Dave, that's a great gift. KT did a bang-up job, as usual.
The talent here is really something to admire. Great work, all.
-
Howdy Boothill,
Wow! That is a beautiful job! Great carving!
Howdy Django,
Excellent work! Isn't that Video a great learning tool!
Howdy Dave,
You are one lucky person to get a rig from a true master.
Many thanks to all of you Gents for sharing this with us.
Thanks for the good comments guys!
Johnny, apart from the tips that the great guys on this forum have passed on to me , Chucks DVD has taught me all i know about making holsters . It's an invaluable "tool" to have to begin leatherwork.
A big thankyou to Chuck for setting me on the right road!!
Django
-
I haven"t done any leatherwork for years and I am trying it again.
This is a gunbelt I did for my son years ago. Not sure that the tooling is deep enough.
-
This is another look at it.
Working on a money belt for me, as well as a set of saddle pockets and a rig for my plammer.
-
Forgot the other pics.
-
I practise a little on the H.O.G pattern while I´m waiting on my pattern.
Dident have the right tools but I think it´s going to be nice on the holster :)
-
I dont have any rust tank so I dont know what color I'm gona try on it.
What do u think?
-
Craigkennedy, I think you did a fine job on that holster rig. I like the color, and carvin them criters is something I've not tried yet. Keep up the good work, and welcome to this neck of the woods!
BhB, that carving looks real good my friend. Before long every shooter in Sweden will be looking like Russell Crowe!
-
BB thats going to be a fine piece of work when done. KT
-
craigkennedy, you have talent, nice holster and belt, Welcome to the forum pard, we're happy to have you join in with us, be sure to post your latest work when you finish it, we'd all like a look see.
Regards
tEN wOLVES :D
BB, nice carving pard, that HOG rig will look great when done.
-
I dont have any rust tank so I dont know what color I'm gona try on it.
What do u think?
H
Hi Bob, i copied a post by Will on the HOG thread on colour without a rust tank.
"You can cut Fiebing's Black Professional Oil Dye about half & half with Mahogany, extra virgin olive oil the leather first, do the block-out with the bee's wax, just like in the how-to article. Then hit it with the mix. I would experiment with some scrap before ya' tried it, but it would get you a little closer to the color without the rust tank."
Django
-
Thanx Django, I will try that... I will try light brown on my testpiece ;)
-
Django, I´ve tryed the tip of yours, little too much mahogney, but its ok.. :)
-
Django, I´ve tryed the tip of yours, little too much mahogney, but its ok.. :)
It's not my tip Bob, it came from the main man himself ....Will !!
Django
-
Ok. I think its gona work just fine when the mix is right. I will get me a
rust tank later, think my wife gona like that :-\
-
CK, looks good. It'll be nice to see your next project. Welcome to the forum, pard. Looking forward to your posts.
BH, that practice piece looks really nice. Thumbsup!
-
Nice, Bob. Great job on the carving.
-
Here is a leather vest that my dear old Mother and I made about 30 years ago. It doesn't fit either me or my son anymore so it will have to be handed down to a grandchild. My Mum was quite a seamstress and a good teacher. I did some family research and found that my Great-grandfather was a harness maker. Unfortunately his shop burned down many years ago.
Really enjoying this forum and thank you for the kind words on my previous posts. God bless, y'all.
-
craigkennedy, thats some nice work on the vest. KT
-
Welcome to the forum craigkennedy, that's a nice vest your Mom made, and one to treasure through time, thanks for sharing with us.
Regards
tEN wOLVES :D
-
Cool Ole vest!That's a look that is hard to find :-\
-
Haven't quite figured how to complete the belt. Should be done in a few days. KT
-
Interesting look KT, looks like it might be RAM TOUGH too, I'd like to get into your mind some day just to see how you come up with these new designs, well done as always pard, it looks good. ::) :o 8)
-
Must have been all that Pepsi ;D He's got a rope in his shop and puts it around his neck,right before he passes out he cuts it and starts pounding,it's the lack of oxygen :-X :D .........................<><><><><><><><><><><>.................****************^^^^^^^^^~~~~~~~~<><><><>
-
Thanks TW. It helps not to have a mind. KT ;) ;D ;D
GCR have u been spying on me? :P
-
I'll sure be glad when KT gets feeling better and gets back to adding some bling, and quits making these plain rigs.Dave ;) ;D ;D ;D ;D ;D
-
I'll sure be glad when KT gets feeling better and gets back to adding some bling, and quits making these plain rigs.Dave ;) ;D ;D ;D ;D ;D
Ha haaaaa! Seriously nice holster, KT.
-
Howdy All
I have not been on much lately. Too much life B.S.
You guys are puttin out some really nice work. Keep it up.
WC
-
Howdy KT,
Excellent! You come up with the coolest looks and designs every time.
-
To all you pards, thank you. KT
-
Very cool Holster KT! Can't wait to see the belt.
-
KT, Holy Cow! What a great piece of work!
I can identify with WC's comments about life issues getting in the way of things :P
-
That vest is very nice, CK. Good work. Looking forward to more of your posts.
Very cool holster, KT. Looks really good. Nice design.
-
Well finally got pics of the two rigs that KT made for me and my wife.They are both great pieces of work.Thank you Pard,it means alot.Dave ;D
-
Very nice Dave, the Kid did you well. ::) :o 8) you can always count on Terry to come up with something special. :D
-
Those look good, Dave. You can enjoy those. Nice work, KT.
-
BHB, nice carving on the sheath and I like the design. Your leather carving is good pard.
Django, you are very talented pard, very nicely done holster.
CK, welcome to the forum pard. Good looking rig and the vest is a classic looking forward to seeing more of your work.
KT, my friend you just keep out doing yourself. I look at your work and wonder where does he get his ideas and how does he put it all together so beautifully? I think GCR might have it figured out. :) ;) :D ;D
Wiley ;D
-
Thanks to all of you for your great comments.KT :)
-
Jumpin Jahosifat,Great Ceasers ghost,Weee Doggies,I brung us some diny mite,now you can fight for truth justice and the American way with those rigs!
Way to slap leather KT. :) :)
-
Thancs Clicker. KT
-
Killer rigs KT!! I know Dave and Miss Linda will enjoy them !!!
-
Howdy.
I´ve made some new loadingstraps to sell, and a looples cartridgebelt for my
shooting buddy. Now I´m waiting for my H.O.G pattern to arrive ;D
-
Darn nice, Bob. Love the stamping on the loops.
-
KT, Nice rig...Bob quality work. Been under the weather for awhile, sorry if I have missed any of the Pards work. Will try to catch up..
AC
-
AC good to hear from you. Hope your better. BB some nice straps you made. KT
-
They look good Bob, you're doing nice work pard. ::) :o 8)
-
Hey Bob, I agree with Skeet; great stamping, especially the meander. I say that because it's the hardest for me to do. Everything looks good. Those shooters in Sweden are lucky to have a guy like you making leather goods, since it's so darned expensive for you guys to import what you need.
Keep on showin your stuff!
-
Me too AC been feelin like hard mud..
Nice loading strips Boothill.
-
Howdy BHB
Good Lookin work. Keep it up.
WC
-
Them some nice pieces ya just made Bob! I love the belt! The stamping on the cartridge loops are way cool! What weight leather you usin for your loops?
-
Was telling Dalton Masterson this past weekend about my Quigley Belt Project that I completed over the winter. The cartridges are 45-70 making the belt wider in anticipation of someday adding a 45-110. It will hold 25 cartridges.
http://picasaweb.google.com/1874sharps/TigerCubGradRockCreekMay2010CodyBaseball#
-
KK nice job on the belt. KT
-
Very nice loading strips, BH. I also like the meander on the strip. Looking good.
That's a fine belt, Kurt. Thanks for the pics. Welcome to the forum. Looking forward to more of your posts.
-
Nice rifle belt Kurt, you did a great job, and Welcome to the forum. we'll be looking for more from you in the future, just make yourself at home.
Regards
tEN wOLVES :D
-
Glad to see you made it over here Kurt! That belt looks good!
Good shooting with you this weekend! We need to do that more.
DM
-
Boothill Bob
Very nice!
Very Clean!
Very Professional!!
-
Howdy KK
Welcome.
Nice Quigley belt.
Funny you should post that. I was just given the last buckle Al Shelton had made for Tom to give to the cast and crew of the movie.
WC
-
Howdy Boothill,
Great looking work you have posted! As Bisquit Joe said "Very nice! Very Clean! Very Professional!
Howdy Kanza,
Welcome to the Forum. Mathew Quigley would be proud to wear this one! You did a nice, neat job.
Many thanks to you Gents for sharing your work with us
-
WC thats one heck of a buckle. KT
-
Nice to see a better picture of the buckle and read a little more about it. That is priceless!
-
Hoiwdy WC,
Overlooked that cool Buckle. If anyone deserves a priceless item like the "Quigley Bucklle" it would be you. We all appreciate the help you give to us.
-
My wife and I got to see the Quigley Buckle last Sunday at the Autry Museum, and it is a beauty, and it is inscribed in the back, WC, Sandy Annie and several of his students were there, and put on a very nice exhibit along with demonstrations, it was a fun day and the weather was perfect. We also got to met Al Shelton who was celebrating his 90 birthday. ;D
tEN wOLVES :D
-
Just catchin' up.
Some mighty nice work bein' posted hereabouts. Congrats to all.
-
Thanks everyone for the comments, I will hopefully get some pictures posted.
-
howdy pards boy youve been busy some great stuff to look at
ive been busy drawing sheridan style patterns and finannly got around to lacing a check book coveri did of my own design
and haveall been toying with the idea of putting together a sheridan style carving pattern book with drawings done by me for
things like holsters notebook covers check book and wallets and then maybe some design for misc use what do ya think
enjoy the checkbook pic and thanks for the support
Cowboy316
-
Nice work cowboy, good luck with your pattern book, it's a good idea.
-
Cowboy thats some great work your showing. KT
-
Very nice cowboy, i'll want that pattern, have u made it?
-
Howdy Cowboy 316,
A great example of carving, lacing and fine workmanship! Thank you for sharing your talents and expertise with all of us.
-
Howdy Cowboy
Keep it up, you're coming along fine.
WC
-
All I can say is you Pards are putting out some great looking leather gear.
And I would like to thank you all for sharing it!! Take care,
Shotgun Steve
-
New guy, here. I just introduced myself in the Greetings Topic. Then I started looking through this thread. Some damn fine stuff here. It's been a very very long time since I made up this kind of stuff, but lately, it seems I've been asked to, so here's one from last week. Let me know what you think.
-
Welcome there Rocky River, and thanks for showing us your work. You may not have done this in a while, but it doesn't appear that yoy've lost any of your abilities!. That's a nice looking rig. Are you going to make some holsters to match it?
-
Glad to have you on board RR. Nice belt. KT
-
Yep.Yep, they are coming...The cyylinder sewing machine acted up. I think I fixed it, but you never know until you put that thing you worked on for hours under the needle...
Thanks for the comps. This was meant to be just a sample (and a "let's see if I remember"). I didn't go crazy with it, just a simple buscadero, if there is such a thing. A fully carved out rig is one of my next goals. I just have to find the time between iphone cases, pancakes, and dog collars...lol
Welcome there Rocky River, and thanks for showing us your work. You may not have done this in a while, but it doesn't appear that yoy've lost any of your abilities!. That's a nice looking rig. Are you going to make some holsters to match it?
-
Nice work Rocky, good to have you with us, make yourself at home pard
tEN wOLVES :D
-
Very nice work RR. Keep it up.
-
Welcome RR
Very nice work.
WC
-
That rig sure looks nice to me RR, and welcome to the forum.Dave ;D
-
Just finished this one up, not very Western but leather none the less.My good friend Alan Folts did this beautiful dagger with a carved Mother of Pearl handle and carved blade and I did the sheath inlayed in lizard and a nice black Tiger's eye stone.Dave
-
Pretty neat Dave, I could see this one riding on a Johnny Ringo rig real easy, nice work pard, and thanks for the look see. ::) :o 8)
-
I'ld be proud of that one, Dave.
-
Dave ,thats one very nice knive and you out did your self on the sheath. It sure goes good with the knive.OH by the way your right, its not western .KT ;) :D ;D ;D
-
Welcome, Rocky! Looking forward to the rest.
Nice work, Dave.
This is a plain possibles bag. I used grain on both sides for the strap so it rides more smoothly on the shoulder. The leather roundel covers a magnetic closer. I use the 'M' stamp as a substitute maker's mark.
-
Howdy Rocky,
Welcome to the Forum. Nice looking Rig. We look forward to seeing more of your work.
Howdy Dave,
Beautiful job on your Sheath. It really compliments the knife.
Howdy Skeeter,
That is a very neat and clean looking Possibles Bag you have made there. Great job of molding!
Many thanks to you Gents for sharing your work with us.
-
Skeeter, nice work on the bag pard, your work just gets better with everything you post, keep it up, and thanks for the look see. ::) 8)
tEN :D
-
More very nice work all around. Good job pards.
Damn! It's coming in faster than I can keep up. ;D
-
Skeeter nice looking bag. KT
-
I love that Tiger Eye stone Dave,very nice sheath and knife :)
And that's a darn nice possibles bag :)
-
Thats a pretty looking knife and sheath Dave
Django
-
Well, shock of shocks, JD is actually going to post something he (finally) made. It's been a work in progress; the belt first, then a few weeks later the strong side holster, and a month lafter that the crossdraw, which I finished up Friday night, in time to use it on Saturday. Thanks to Kid Terico for the buscadero pattern. He gave me a double, but I went with a single this time.
Once again a learning experience! I won't try to run a stamp like that down the middle of the belt again; it looks like a drunk man stamped it! I used drum dyed leather for the outside of the holsters, and decided not to dye the lining. The belt is not lined, made from 10/11 Herman Oak, their cheapest run, which of course I had to dye.
Dave, cool knife sheath, as always.
Skeeter, that's an awesome bag. Could you explain how you got the molded look ?
Thanks guys, JD
(http://i165.photobucket.com/albums/u51/HarleyPastor/buscaderocrop.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/crossdrawcrop.jpg)
-
Good looking rig, JD!!!
Keep it up!
DM
-
JD nothing wrong with that. Looks darn good. KT
-
Howdy JD
You did a fine job. That stamp is hard to run without a boarder to go by.
WC
-
Nice work, JD.
You asked how I got that molded look. I wet mold the leather around the bag-shaper, spending several minutes shaping it manually. Then I put two tacks in the offcut area to hold the top edge parallel to the wood. Then I push the frame down over the top. That really helps to define the shape. Then I clamp it all together. Leave until totally dry.Then repeat the same process for the lining, with the grain side down.
I've made three or so of these, and as you can see, my clamping has left indentations!
Hope this helps..
-
'Nother pic...
-
Howdy JD,
Nice looking Rig! Please let us know how it works out for you at the shoot.
Howdy Skeeter,
Thanks for posting the pictures of your molding technique. Very informative!
-
Thanks for that explaination Skeeter. I assumed you molded it around a wood block, but that second piece is a real winner. That must have really taken some time to build, but the results are awesome!. How much of a gap to you leave for the leather? Could you give the demensions of that bag? With the popularity of messegner bags (man purses) these days I would think there would be a market for something of that quality if it was large enough.
K T called, and we talked about that stamp running down the middle, and now I know why it looks the way it does. Thanks for that tip Terry, I appreciate it, and thanks to all of you for the encouragement
We had a great Western 3 Gun shoot yesterday, and the rig worked just fine. The last 3 times I've shot it's been Wild Bunch, so it was nice to go back to the Bisleys.
-
JD, it's not small - about 9.5" wide by about 8" high.
I leave 1/8" gap for the leather. I used 5-6 oz. leather.
Yes, it's a lot of work, both the carpentry and the leather work. If I charged for the hours I put in, (just for the leatherwork) it would cost far more than the market would bear. That's the trouble with hand-made!
-
Nice work JD, your stitching is looking real good, that rig will make your look like a top gun for sure, thanks for the look see.
Skeeter, good info. pard, thanks for sharing with us.
tEN wOLVES :D
-
Good job JD!
-
Looks like a fast rig there preacher.You should stamp"Like a thief in the night" somewhere.. ;D :o ;D
-
Nice job, JD. Keep it up.
*******
Skeeter: Thanks for a peek at the molding blocks.
-
Thanks again guys, you are very kind.
Skeeter, that is really fine work, and a lot of it! Whoever buys one of those bags is buying a real work of art.
-
Thanks, JD.
-
Nice checkbook, Cowboy. Looks good.
RR, that belt is very good work. Welcome to the forum. Thanks for the pics. Looking forward to more of your stuff.
Cool sheath for the dagger, Dave. Your friend Folts did some outstanding work, there. Your sheath is very suitable for it. Nice.
Good looking possibles bag, Skeeter. Good job.
That's a fine rig, JD. It looks really nice with the braid deco on it. You can be proud of that one.
-
Missed a bunch! Great check book cover C316, Good looking rig JD. Thanks for showing the mould Skeeter! Great work everyone!! ;D
-
Howdy Pards
hot off the bench just a couple new sheaths for a customer done a few other sheaths in this style and people are liking it so ill adapt y patttern to fit any knife LOL
enjoy and thanks for lookin
Cowboy316
-
316 those are some very nice styles your showing. KT
-
Well done Cowboy 316, that makes for a good behind the back knife sheath, nice design, you should get a lot of calls on this one. ::) :o 8)
tEN wOLVES ;D
-
Just finished this one up for the "Ostrich Market".It will be used to show off some of his Alligator products.Thanks to KT for some of his silver goodies.Dave :)
-
Dave that's a beauty pard, I can see the KT influence there, you did a nice job, thanks for the look see. ::) :o 8)
tEN wOLVES :D
-
Dave thats a beautiful holster butI wouldnt expect anything else from you. Its not as nice as my file knife. KT ;) ;D ;D ;D ;D
-
Now that's what i call Gator Aid ;D
-
Those "pancake" sheaths look good, Cowboy. Really nice work.
The alligator looks really good on that holster, Dave. Very nice look with the spots. Good work, as always.
-
Been working on a proto type of a wild bunch holster. Made some mistakes, makers stamp in the way of a screw, but all in all I achieved the look I was looking for, a holster that looks well used and worn.
AC
-
Nice shading :)
-
AC nice job, looking really good. KT
-
Looks nice AC, I like the border you used, and the color came out good too, it does have a used look about it, well done Pard. ::) :o 8) ;D
tEN wOLVES :D
-
Thanks Rick,Rod and Terry, been in such a funk it was good to complete a piece even if it is only a proto type. Again Thanks.
AC
-
Nice!
-
Howdy Cowboy,
Nifty design on your Sheath's. Looks very practical.
Howdy Dave,
Beautiful work on your Holster. Great application of the Alligator!
Howdy AC,
Your Holster has a great look to it. Sometimes proto-typing is the way to go. At times I've made two to three proto-types before I was satisfied with the result.
Many thanks to you Gents for sharing your work with us.
-
Overall +1 to what Johnny wrote.
KT, those last holsters reflect your design quality and workmanship very well. Awesome job as always.
Cowboy, those sheaths are really looking great. I think you have that design nailed down
Dave, Holy Cow! Yes, I see the KT Influence, but your stuff is already such top quality, and I love the lines of that holster, with or without the embelishments.
AC, I like your holster a lot. So many these days look like slightly worked over IPSC rigs, while yours has more of a period look to it. With that back I imagine it would be real stable, a plus.
I'm working on a Wild Bunch holster today, and hope to show it pretty soon. JD
-
Thanks Santee and JM. JD the bottom screw keeps the holster from sliding out of the loop, but on the next one I will add a belt keeper like I have seen you do. It still lifts up on a belt. Thanks for your comments all.
AC
-
Nice Knife sheath Cowboy! I like the design a lot!
AC! That 1911 holster is nice pard! What stamp(s) did you use on that border pard? ( If you don't mind me askin :D )
-
D447S and N300 Amin, Thanks for askin.
AC
-
AC, that holster looks good. Nice border using the meander stamp between the sunbursts. As to the maker's stamp, you can put it on the front for all to see next time. It can be part of the design.
-
howdy pards
just wanted to post a knife sheath that ive posted before but this one is done with one of my drawings
so enjoy and thanks for lookin
Cowboy316
-
That's a beauty Tim, nice work all around. ;D
-
Howdy 316
I like that style of sheath.
WC
-
Boy me too...
-
Howdy 316,
Beautiful work! Great job of carving coupled with excellent workmanship!
-
316 beautiful job and nice layout.KT
-
Howdy 316, :o
That is AWESOME!! I had never thought about making a sheath like that! I know that my brain isn't working right but I still wouldn't have thought of that!
Thanks for sharing.
ACE
-
here is a picture of my first holster for my walker colt. i copied it from a holster pictured in the book from patterson to peacemaker by dennis adler.
(http://i268.photobucket.com/albums/jj38/buckskinbilly/walkerstarholster4.jpg)
(http://i268.photobucket.com/albums/jj38/buckskinbilly/walkerstarholster2.jpg)
-
Nice walker and holster!
-
Very nice Billy! The Walkers are one of my favorite guns. Very nice holster. You did a great job on it.
-
BB nice job for your first one. Keep m comming. KT
-
Well you did a nice job on this holster, and that's a beautiful Walker, and Welcome to the forum Billy were glad to have you with us, I hope you wont stop here, we would like to see more from you, so make yourself at home, and don't be a stranger. ;D
Regards
tEN wOLVES :D
-
BB:
Looks like you're off to a great start with the walker holster. Nice job.
As they say, "Endeavor to persevere....."
-
thanks yall
i have done a few more since that one. but i must say the star was a challenge to cut out.
i'm working on a couple of carved slim jims for 51 navies, gonna try my hand at leather carving
-
Howdy & Welcome
Nice job on your first one.
WC
-
Howdy Buckskin,
All of the Pard's echo my sentiments. Great job and welcome to the Forum. The star is a neat touch. Look forward to seeing your Slim Jims.
-
Howdy BB :),
I like your holster, it shows great design and the desire to have a period correct holster. Don't take this wrong, I do realy like your holster, the Star is a bit much for me, but I am not the person that is going to wear it! you did a AWESOME job on it, and if the star wasn't there it would be a perfect period peice.
Please keep in mind, this is only my opinion and in no way reflects on the forum.
Keep up the great work!!
ACE
-
no problem ace. thanks for the kind words
-
Well, I finally finished a project. I built a Wild Bunch holster, trying to get it to look close to the shooter's SAA holster.
The color didn't trun out as well as I'd hoped. I tested a half dozen dyes trying to match the color, and Eco-Flo all in one Desert Tan looked the closest, testing on a piece that I used for the front. I don't like using all in one, and doubt if I will again. I went over it with Fiebings light brown antique paste to get some color in the impressions, and tried to gaive it a little bit of a used look; slronger in some spots, lighter in others.
The first picture is my friends SAA holster, from a local supplier. The second is mine
(http://i165.photobucket.com/albums/u51/HarleyPastor/HarleyRiderSAAHolster.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/HRWBHolstercropped.jpg)
-
Howdy JD,
You did real good! Neat and Clean! Nice job of keeping the border stamp concentric with the edge of the Holster. Your friend should be very happy. Where did you get that cool Concho?
Many thanks for sharing this with us.
-
Thanks for the kind words Johnny. I figured you'd like that Concho! I Googled V-Twin Concho, and up popped S&D Trading. They got it out to me right away; good service. I bought a few spring clips from them as well.
-
Nice work JD, and the color will amber out a little with time making it a very close match, well done pard, I did my brother in law a piece using that same concho, he really liked it, being a Harley Dude in all, thanks for the look see ::) ;D
tEN wOLVES :D
-
JD good job. Nice straight lines on your sewing.Keep it up. KT
-
Cowboy, that sheath is a good one. Nice tooling.
BB, that holster is cool. nice job. Welcome to the forum.
JD, I like yours better than the other one. Good job on it.
-
KC, and Red O'Tool, Awesome, plain Awesome werk Pards, yer giving me some ideas here. :)
Slick
-
Hi pards.
Now I´m back from the European Championship, and I´m soooo happy.
Third place YIEEEHAAA
I most say that I´ve missed a lot of nice leatherwork that U have dom, my god
I have to catch up ;-)
-
Hi pards.
Now I´m back from the European Championship, and I´m soooo happy.
Third place YIEEEHAAA
Well, that oughtta keep a grin on yer kisser for a while.
Congratulations.
-
Congrats Bob, now you'll have to make a nice and fitting belt for that buckle. :D
-
BB congradulations. Thats something to be very PROUD of. KT
-
Great work, JD!
Congrats on the award, Boothill. :D
-
Bo; That is great news.
-
Well done Bob!!
Django
-
BhB, that is quite an accomplishment; congratulations. It looks like the buckle says Duelist, which is tricky. I do that every once in a while to remind myself that I’m not too hot at it!
Mr Buckskin Billy, that’s a nice holster for a really cool gun. I don’t think you even need to fire that one; it can take people down by the power of intimidation!
Thanks for the kind words gentlemen, I do appreciate the comments. I know I need to be more consistent with the depth of my stamp impressions. I hadn’t stamped anything in quite a while. Now I need to find some time to get some swivel knife practice in.
-
i do more brain tan buckskins than i do leather work. i have been brain tanning for about 8 years now and only the good Lord above knows how many critters i have tanned over the years.
thought some would enjoy some pictures of the buckskins and buck skin clothing i have done
(http://i268.photobucket.com/albums/jj38/buckskinbilly/jeremyhides4.jpg)
(http://i268.photobucket.com/albums/jj38/buckskinbilly/hide.jpg)
(http://i268.photobucket.com/albums/jj38/buckskinbilly/riflebag.jpg)
(http://i268.photobucket.com/albums/jj38/buckskinbilly/abc_018.jpg)
[Dead link deleted by moderator]
(http://i268.photobucket.com/albums/jj38/buckskinbilly/101_0069.jpg)
sorry for having my grizzly mug in these pics :)
-
BB nice job, thanks for showing. KT
-
Billy, you've certainly earned your name. That's some good lookin stuff
-
Howdy Boothill,
Congratulations! You should be very proud of this award and accomplishment.
Howdy Buckskin,
As JD said... "You've certainly earned your name". Great looking stuff! Many thanks for sharing this with us.
-
Well Buckskin Billy, like JD said you've earned your name very well, nice work, and what a great hobby to have, you just don't see a lot of brain tanned hides anymore, nice to have you ridding with us, and thanks for sharing pard.
Regards
tEN wOLVES :D
-
Stylin man totally stylin! You wear a fine hat too :) I love the smell of smoked hides.Check this guy out BB,i've known him for years,lives about two miles from me,you'll enjoy this.He finally had to settle in, got to old for big lonesome..Nice craft you have.
http://americanfrontiers.net/dispatches/view.php?newsid=1031755676,1583,&team=
-
Congratulations, BH. That's really great. Well done. 8)
BB, that's some really fine goods you have there. Nice work. Having done the tanning yourself makes it even better. Cool as can be. :D
-
Hey Buckskin Billy, great looking stuff. I love the Fringe and the smell of a smoked hide. Next time you want to cut out a star (I too have Dennis Adler's book and like that Holster) Use a cookie cutter to mark the wet leather. You can find loads of different star sized cookie cutters around Christmas Holiday. That holster in the Dennis Adler book led me to make this carbine scabbard for the pistol that never was.
(http://i22.photobucket.com/albums/b349/Mogorilla/scabbard3.jpg)
-
Howdy Mogorilla
Nice scabbard pard, I like it, and your gun is a beauty, thanks for the look see. ::) :o 8)
tEN wOLVES :D
-
Mogorilla, nice scabbard and that gun is OUTSTANDING. KT
-
Carefull, ol Boothill will be too tall fer us now. ;D
JD, yer always do nice werk Pard :)
MS
-
Lol, I´m tall anyhow 186cm ;D
-
cm must stanfd for Cowboy Man ;D
-
C316, great sheath! You are smokin on the carving!
Buckskin Billy, that holster is mighty fine! I like the design and exicution! Good job!
JD, a really cool wild bunch holster.
Y'all done real good!!! ;D
-
cm must stanfd for Cowboy Man ;D
Yea right, or the total time when I´m shooting 10 stages ;)
-
Over the last couple of years, I have been trying fervently to copy Will Ghormley's Hand Of God holster. When the pattern came out, I bought it immediately! So, compiled here are three out of the four versions made over the years to see the differences. Came pretty close with the middle one, but just couldn't get the loop right (#3 is Will's pattern...and my first use of a beveling tool).
Does anyone else have a project they did over again (months/years later) to share?
-
Howdy Santee
I'd say you got close enough that there wasn't much difference, all three holsters are first class in my book, nice work pard, and thanks for sharing, as far as redoing a holster style , I've been redoing all along, with a little something different each time, keeps things fun and interesting.
tEN wOLVES :D
-
Thanks, TW!
-
Mo, that scabbard looks good. Nice work. The pistola is no slouch, either. ;D
Santee, I agree with TW about all three looking good. Those are first class holsters. Very good work.
-
;)
-
Great holsters Santee, I like all three versions.
Although not the most western looking, this new knife/sheathis going on Mrs.KT's rig.The knife is 1095 and has been fileworked,nickel silver guard with Buckeye burl wood.The sheath is inlaid with stingray and a blue Lapis stone I made.It is canted for crossdraw.Dave :)
-
Nice work DC, as always, thanks for the look see, Mrs. KT should should really like ::)
-
Beautiful work Dave as usual. If mom dont like it I,ll send it back as usual. KT ;D ;D ;D ;D ;D
-
KT,
Yer gonna have ta pry that knife out of her cold, dead hand! ::) ;D
-
Dr. Bob, I agree.KT
-
Looks like turquoise to me on there..How the heck do ya get buckeye that color?????Dang it is hard to fathem some of the stuff i see on here..Very very nice!!
And boy wait till ya see what KT done for me,i got a tad choked up this mornin when it came in.It is just bueatiful!!It sure brought back alot of memoreis..Phhh"sniff"
-
Nice, Dave!
-
thanks for the kind words yall. i will remember the cookie cutter trick on the next start holster i do.
real nice holsters santee i really like the hand of God rig. i plan on doing one after i get a little more practice in on tool work.
nice looking knives dave cole
-
Howdy Mo,
Beautiful work on your Scabbard! I'll bet that pistol is a lot of fun to shoot and accurate too.
Howdy Santee,
Those are some good looking Holsters you have made there. The finishes give them a very nice period look. It is not uncommon for me to occasionally make something over several times before I'm satisfied with the result.
Many thanks to you Gents for sharing your work with us.
-
Dave, that's some more beautiful work. The lapis goes nicely with the stingray. They both have somewhat similar visual elements. Nicely done.
-
Here is my newest holster, 3:10 to Yuma, its just a test holster. now I know that I can make them ;D
-
Wow.. skitsnyggt Bob.
Ops.. sorry. English translation ;)
Very nice work there pard.
-
B Bob,
WOW is right! Totally awesome!! ;D
-
Howdy Pards.
Being new to this forum, but even more 'cause here I'm in the midst of so many talented Leathersmiths makes me a little reluctant to show you my first ever leatherwork. (well... that's not really true; longgggg time ago in primary school I had to make a purse or something with leather and lace but I messed up that one...) :-[
A couple of months ago I got me a Ruger New Vaquero and needed a holster and belt for it. Because the prices overhere (The Netherlands) are steep and/or the leatherwork not to my likings I began thinking about making my own. Discovering this forum turned out to cost me a lot of sleep; reading hour after hour often far past midnight. ::)
Recently I decided to go for it and bought a large piece of leather, some basic tools (swivelknive and stitchgroover), some needles and waxed thread.
I drew the pattern myself, started cutting, sewing and rivetting and within a week the holster and belt were ready to be soaked in my homecooked dye. 8)
Not wanting to make things too complicated the firtst time I wanted it to look (to me at least) like a workingclass holster and belt, pure simple.
I think I succeeded in that; not too fancy looking and the color turned out exactly like I wanted it to be.
Yep; I'm very pleased with the end result. ;D
So.. here she is... made by me with a lot of your help.
-
BB great job on the holster.Keep it up. Rattlesnake. very nice first rig. KT
-
Here are some pict of a collection I,m putting together . More are comming. They are done JOHN COHEA, DAVE COLE ,GUN BUTCHER and yours truly. Hope you like them. KT
-
more
-
And more.
-
KT! Please send contents of the entire table to:
Amin Ledbetter
17 East Doris Drive
.........
Man that's nice stuff KT! John is amazing isn't he?
Bob! Super Nice job on the Hand of God Holster pard! Beautiful carving and stamping work you did. I still need to order Will's patterns. Wish things would stop eating into my slush fund! ;D Way nice job on it pard!
Pete! Man you got nothin to be ashamed about on that rig pard! That is great job for a first rig. I got a couple quick questions for ya though! Did you have fun buildin that rig? and are you hooked on doin leather work like the rest of us are now?
Great job Pete!
-
Boot Hill Bob
I'd say you did a fantastic job on this holster, Will will be proud of you for sure, it's perfect in my eyes, well done pard. :o 8) :D
tEN :D
Rattlesnake Pet, Welcome to the forum pard, were glad to have you join in with us, and there is nothing to feel bad about when it comes to that holster and belt you made, you did a dandy job, it looks good, you should be proud. now we'll be looking forward to seeing more of your work. ::) :D
tEN wOLVES :D
-
Well, its been a while since I was on the forum and to say you guys have all been busy would be the understatement of the year.
Beautiful, Beautiful work by everyone. its gonna take me a week of just looking to take in all the details of the articles you guys have made.
Just so you will know that I have not quit doing leatherwork here are a couple of ball flasks I did recently. The rest of my time has been spent on powder horns, salt horns, a shot horn and lord knows how many powder measures and pan brushes. But , it is always good to get back here and look at what the real masters are doing. You guys never cease to amaze me with your creativity and execution. Don't ever stop.
Gun Butcher
-
Fine lookin rig Rattlesnake!My buddy Floyd loves it ;D
KT,i just noted to remember,when room runs out hang from ceiling~~~Carol is gonna shoot you :D
Dang Gun Butcher i was wonderin where you was??? Nice bags man.I had a busy day with tv repairs,cousin came by and the museum curator came by and gave me a bueatiful framed picture of my grandfather she had done for putting my family dust bowl story in the museum,she wants to do an interview soon,heck i might even make the papers ;D
Floyd
[Dead link deleted by moderator]
-
Cool Flasks GB! Good to see ya back pard! Man those are really neat!
Do you wet mold the pieces over a mold or a form of some type, then stitch em together, or are they stitched then molded somehow?
Rick, you mean make it in the paper somewhere other than in the police log???? ;D
-
Addin to 8) They couldn't get all the info on the poster.. ;D
[Dead link deleted by moderator]
-
Amin and Rick, Thanks for the kind words Pards.
Amin, these were sewn and then soaked and packed with #8 shot to shape them. You have to keep packing it in till you wonder if yer stitching is going to hold ??? ;D
Gun Butcher
-
OK, BH, here's what you do. Make another test holster, left strongside this time. Then all you need is a belt and you have one fine rig. Nice work.
Pete, your rig came out really good. Very clean and finished looking. The color is perfect. I've tried for that a couple times and missed the mark a little each time. You nailed it. You have good reason to feel good about that. Welcome to the forum. It'll be nice to see more of your stuff.
KT, that's quite a collection you have going. All of it is impressive stuff. Thanks for the pics.
BG, those molded ball flasks are really cool. They look very usable and have a nice look about them. Good idea to use the shot to mold them. Darn good work on those.
-
Addin to 8) They couldn't get all the info on the poster.. ;D
[Dead link deleted by moderator]
OMIGAWD WHUZZAT?
Oh, sorry. Hi, Rick.
;D
-
Tanx pards, its a fun holster to make. :D
-
Howdy Boot Hill,
Beautiful Holster! Excellent workmanship and design!
Howdy Rattlesnake,
Welcome to the Forum. Very nice Holster! It has a real period look to it. We look forward to seeing your future projects.
Howdy KT,
Awesome! A genuine pleasure to view! You have a real knack for displaying your fine museum quality collection.
Howdy GB,
Nifty job on your Pouches!. Great idea to use the shot for molding them.
Many thanks to you Gents for sharing this with us.
-
Brilliant work on the HOG rig Bob.
Great first time rig rattlesnake, some serious riveting going on ,there's a rig that will not come appart !!
Django
-
To all of you, very nice work.
WC
-
Howdy Pards
Thank you for all your kiind comments..... :)
Pete! ..... Did you have fun buildin that rig? and are you hooked on doin leather work like the rest of us are now?
Sure did have fun making it.
After years of racing, thrashing and reparing motocross and roadbikes this was definitely something completely different. But I loved every minute working on it. ;D
This for sure will be the beginning of a new addiction..... already future plans are stacking up in my head.....
Great first time rig rattlesnake, some serious riveting going on ,there's a rig that will not come appart !!
Howdy Django
Yep.... no expences were spared in the rivetting department..... ;)
Next project certainly will see more handstitching now that I've done it once..... not easy and a lot of work but afterall very nice to do.
-
You and KT will get along great,he used to race snowmobiles (_L_=_L_>
-
+ 1 to what WC said for everyone.
Pete, welcome to the forum! That's a very authentic looking rig that I would be proud to build or wear. Nice work
-
Great work, fellas!
-
Compliments to all. Some very nice work there.
Boothill: Dandy job, very nicely done.
Rattlesnake: Welcome, pard and keep it up.
-
Now is the rig done. $338 is maby toooo little :-\
-
Fantastic job there Bob!!!! :o
What dye did you use in the end?
Django
-
I used Fiebing's light brown oil dye and then EVOO
-
Looks good Bob!
I used my HOG holsters Sat. at our match, and they are a slick pulling holster. Love that design.
DM
-
BB Great looking rig . KT
-
Bob, you did an outstanding job. I'm glad Django asked about the dye; took the words out of my mouth. I don't know what you get for single holster rigs in Sweden, but you sure aren't asking too much for that kind of work, especially with the carving and stamping.
Just curious, is anyone lining their HOG rigs?
-
B. Bob,
Simply gorgeous! Any one would be proud to own that rig!! ;D
-
Excellent work Boot hill Bob, thanks for sharing , you can be proud pard ;D
-
I used Fiebing's light brown oil dye and then EVOO
Bob,Is the Fiebings oil dye easier to control than their spirit dye?
Django
-
Great work Pards. Bob, beautiful rig and I think that price is low, someone is getting a bargin.Dave :)
-
Great HOG rig BB, price is probably low... ;D ;D
AC
-
My latest 1911 holster. KT
-
I agree with AC on tha Boothill,very nice.
KT that one is purty,i like that blue stingray!You've been busy :)
-
Very nice KT, as always your work stands out. ::)
tEN wOLVES :D
-
Very Classy KT, I like the blue accent with the Stingray. Another fine job from the house of Kid Terico.... ;)
AC
-
Howdy Boot Hill,
Beautiful work! This Rig has a great look to it. Your customer should be well pleased.
Howdy KT,
Another masterpiece from your workshop and another fine example of your versatility.
Many thanks to you Gents for sharing your talents with us.
-
Very nice holster KT, good work
-
Bob,Is the Fiebings oil dye easier to control than their spirit dye?
Django
Fiebing's Oil Dye is also an alcohol-based dye with oil in it for better coverage. The oil helps the color push
deeper in the leather and makes the alcohol evaporate slower. Correct me if I´m wrong anybody :)
-
Fiebing's Oil Dye is also an alcohol-based dye with oil in it for better coverage. The oil helps the color push
deeper in the leather and makes the alcohol evaporate slower. Correct me if I´m wrong anybody :)
Thanks Bob, i am still having trouble with Fiebings spirit dye soaking into the work to quickly, i case the work before wet wiping or quick dipping the piece but before i get a chance to wipe off the excess it goes in too quickly and i get a much darker and streaky effect than i wanted .
Does the oil dye give more time to wipe the excess off to acheive a more uniform finish all over the work?
Do you dip or wipe the product?
Thanks
Django
-
I wipe with a cotton "stick". But I do it on dry leather and that
works well for me.
-
BB & KT
Nice work guys. Keep it up.
WC
-
Thanks to everyone for the nice comments. KT :)
-
I was asked to build a holster to snap into a purse made to carry a gun. The existing holster was for a slim auto, but this gal carries a snub nose revolver. This was the first use of my 10 dollar thrift store food sealer. Thanks to holster maker Boddy Rose for sharing this idea during a holster class he offered at the Portland Tandy.
(http://i165.photobucket.com/albums/u51/HarleyPastor/purseholster002.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/purseholster004.jpg)
(http://i165.photobucket.com/albums/u51/HarleyPastor/purseholster006.jpg)
-
Cool idea!
-
As Santee said, nice idea, it came out very nice JD, well done pard, thanks for the look see. ::) 8)
tEN wOLVES :D
-
JD
Great job.
WC
-
JD nice work. KT
-
Thanks guys, I appreciate the support. Given the restrictions (square back with fixed snaps, distance down into the purse, wanting the gun to sit lower than the original gun) it was fun to make. Most people will never see the holster, which is fine!
KT, that's a great looking 1911 holster!
-
Howdy JD,
That's a pretty nifty idea. You are thinking Sir.
-
Good work JD!
-
I,ve made one left holster to my rig, so now its complet. I will trade it for shooter boots now,
I have always wanted those boots :)
-
Hmmm, I realy need a maker stamp :-\
-
Howdy Boot Hill,
That is one gorgeous Rig! A genuine pleasure to look at! Many thanks for posting it.
-
Really nice Bob, and yes, you sure do need a Maker's Stamp!
One thought about those tall boots, which I assume you are talking about. Often times they look cool, but are not very comfortable to wear. I would ask about for recomendations for ones that have some comfort as well as style.
JD
-
Well Bob... why not make the boots your self ;D
You have the talent, how about matching them to your 3:10 rig
-
BB you did yourself PROUD on that rig. I like it. KT
-
Tanx pards... I got one rig on the way to Us...
Have to show u how we train in Sweden, here
is my friend Ray Heartless
http://www.youtube.com/watch?v=_dCEfropRwk
;) Its someting ah :)
-
Howdy Pards
just finished up another check book cover its just oiled and the Skidmored a double loop edge
lacing the front is one ove my drawing and should be in the book im thinking bout putting
together and the back is a simple basket stamp
thanks for lookin and all the support and help
Cowboy316
-
316 very nice job as usual. KT
-
That's the bomb dude! :)
-
Tanx pards... I got one rig on the way to Us...
Have to show u how we train in Sweden, here
is my friend Ray Heartless
http://www.youtube.com/watch?v=_dCEfropRwk
;) Its someting ah :)
You sure done a great job on that HOG rig man!
http://www.youtube.com/watch?v=d2Z9qN8R9Bg&feature=related ;D
-
Very nice cover Cowboy! Make sure Im on that list of book people!
DM
-
Cowboy 316, that's a great looking cover, both in design and execution.
-
Tanx Dick.. I hope thet to, feel like a kid on chrismas ;D
-
THIS THREAD IS NOW CLOSED, USE " THE NEW THREAD (http://www.cascity.com/forumhall/index.php/topic,33770.0.html) "!!!!! " Leathersmiths Show Us Yer Stuff Part Two "
This has been done to help free up space, and make the system work faster, you will also notice that this thread has been condensed, nothing is lost, there are just more post on each page now, our server needed to free up space and this looks like it will do the job, So thanks for your cooperation, if the new thread, "Part Two " starts to get to the same place eventually, we'll start a " Part Three ."
Regards
tEN wOLVES
THIS THREAD IS CLOSED AS OF 7/27/2010 " BUT OPEN FOR VIEWING " as usual