Absolutely NOT Perfesser !!

Lasers take batteries and batteries make FIRES especial when in pockets!!  No No.  Gotta put a SCOPE onnit.  A nice Stainless matching one at that.

Scopeit you betcha.

Beyootifull! Congrats and Happy Birthday!

I too voted prior to brass being an option.   The RMC are stout and I bought 10 eons ago (less than $4 a piece).   They take the 209s well.

I have an oddish loading.
Drive spent primer out with dowel, fitted with blunt nail.   It is a 5/8 dowel and taps the spent primer out easily.    Next, thumb seat 209 primer (after cleaning of course) and use a 2nd dowel that is dished to seat with just another tap.   Pour in 80 grains of ffg, through a 24 inch drop tube.   Place card stock over and seat with dowel.   Add fiber wad, seat with dowel.  Using the 80 grain measure (I made it from a plastic tube), measure and pour in #7 lead shot.   top with a card stock and seat.   Then run a bead of elmers white glue around the edge to seal. 

I do the same with plastic hulls that have had the crimp portion cut off.   

I will say, I have never patterned them.   We do not shoot a lot of shotgun in NCOWS, but we do a texas star with shotgun, rifle and pistol.   with the brass shells, it is the one of the 3 I will take all five targets out with.   

Less than two weeks to go. The weather looks pretty good, forecast is for mid 60's to low 70's with low rain chances. A reminder that we'll be providing a grill for Sat. night, bring what you like. Looking forward to seeing everyone.

The third gun sits in your guncart as a spare for the one you're shooting...

If you really really really like something you better get 3.
Because 3 is 2
And 2 is 1

And if you really really really really like something, i guarentee they will stop making it.

Forget who said that…..