......found one at C&C Sutlery. I'll let you know what it's like when it arrives.
In the video, Eric mentioned that he only puts six rounds in the loading tubes of his Blakesley box because the tubes sit too low to grasp. If you read the comments, you'll see that I told him what I did to solve that problem. I put short pieces of dowels into each tube. Since the holes in the block are drilled all the way through, I also glued a thin board on the bottom of the wood block to hold everything in place. I should mention that I also sanded the inside of each of the holes in the block to help the tubes slide in and out more easily. The reproduction box that I got needed a little help to make it functional, but that little bit of work paid off and I find it really useful when I'm at the range.
Griff