Author Topic: Uberi Barrel Work- Gunsmith Recommendation  (Read 1711 times)

Offline Peyote Pete

  • Citizen
  • *
  • Posts: 19
  • Liked:
  • Likes Given: 15
Uberi Barrel Work- Gunsmith Recommendation
« on: September 06, 2021, 12:36:56 PM »
Thinking about having my El Patron barrel shortened to 4 inches and wondering if anybody can recommend a "Smith"

Thanks !!

Peyote Pete

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7569
  • Liked:
  • Likes Given: 122
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #1 on: September 07, 2021, 09:52:41 AM »

considering what is involved in cutting to 4 inches, you might be well advised to hang around and see if you trade.  If a even four inches is your hearts desire, the barrel has to be shortened, crowned, new sight, Ejector housing and ejector rod shortened and barrel drilled and tapped for the screw.  Won't be cheap.

I'd suggest Boomstick Jay


Offline Pettifogger

  • Top Active Citizen
  • *
  • Posts: 3613
  • Liked:
  • Likes Given: 19
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #2 on: September 07, 2021, 10:09:06 AM »
Plus one to Coffinmaker including the recommendation for Boomstick.  Also how long is your existing barrel?  If it is 4 3/4" when you shorten the barrel part of the old sight slot will be right in the middle of the cut.

Advertising

  • Guest
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #3 on: Today at 03:14:07 AM »

Offline Peyote Pete

  • Citizen
  • *
  • Posts: 19
  • Liked:
  • Likes Given: 15
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #3 on: September 07, 2021, 10:32:19 PM »
Barrel is 5.5" right now, just tried some hefty .357's today and I believe I will leave it as-is. The extra weight forward helps with recoil. Thanks for the responses gents !

Offline Froogal

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 398
  • NCOWS #: 3882
  • Liked:
  • Likes Given: 562
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #4 on: September 08, 2021, 09:07:41 AM »
Barrel is 5.5" right now, just tried some hefty .357's today and I believe I will leave it as-is. The extra weight forward helps with recoil. Thanks for the responses gents !

Yes, barrel length makes a big difference in "felt" recoil. I shoot .45 Colt in 3 different Uberti's. The 7 1/2 inch barrel is nice to shoot. Very little recoil. 5 1/2" barrel is still not bad, but my newest acquisition, a New Sheriff model with 3 1/2" barrel is a different animal. Shooting the exact same loads in all 3.

Offline The original bad bob

  • Very Active Citizen
  • *
  • Posts: 72
  • Liked:
  • Likes Given: 91
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #5 on: October 27, 2021, 09:17:54 PM »
 There is a smith in Phoenix AZ name Bob James.. his work is very good.

Offline Flinch Morningwood

  • Top Active Citizen
  • *
  • Posts: 346
  • Liked:
  • Likes Given: 1
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #6 on: December 30, 2022, 08:36:24 AM »
What is the contact info for Broomstick Jay?

Thanks!!!!
"I'll kill a man in a fair fight. Or if I think he's gonna start a fair fight."

- Jayne Cobb

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4632
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1139
Re: Uberi Barrel Work- Gunsmith Recommendation
« Reply #7 on: December 30, 2022, 10:34:23 AM »
What is the contact info for Broomstick Jay?

Thanks!!!!
Boomstick Jay, Jason Widmer, Boomstick Arms Co LLC, Leonard, TX 254-368-4540

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com