'92 Rossi..........

Started by Foothills Drifter, May 08, 2004, 04:41:14 PM

Previous topic - Next topic

Foothills Drifter

Howdy......
I have a '92 Rossi that worked flawlessly (is that a word :o ) for the first year of my Cas shooting. After that it would stove pipe the the cartridge before it could get to the chamber (.45 colt) It's been sittin in the safe for 4 years now and ain't been shot sense (I have a '66 Win. and a '94 Marlin also) I was told by another shooter that I need to put a shim under the chingaso's (thingys) that are screwed (  :o ) to the frame and my problem will be solved. I could send it to Steve Young but that wiuld be too easy. Anyone tried a fix like this........?

Good shootin......
Vern... 8)

Tombstone Runner SASS#54765

Hey Drifter
Go talk to Steve at www.stevesgunz.com....He is known as the 92 expert. Or let me know if ya wanna sell it!! :)
TR
"Did you bring some gold?"
"Nope!"
"Silver?"
"Jus Lead"

Texas Lawdog

If it can be fixed< Steve is the"man".  If he works on it, the problems are solved and future problems are avoided.  If you are planning on keeping that rifle. Let Steve fis it for you.  Four years is a long time to let it sit.  Thats four years that you could have been shooting it if Steve had worked on it to begin with.
SASS#47185  RO I   ROII       NCOWS#2244  NCOWS Life #186  BOLD#393 GAF#318 SCORRS#1 SBSS#1485  WASA#666  RATS#111  BOSS#155  Storm#241 Henry 1860#92 W3G#1000  Warthog AZSA #28  American Plainsmen Society #69  Masonic Cowboy Shootist  Hiram's Rangers#18  FOP  Lt. Col  Grand Army of The Frontier, Life Member CAF
   Col.  CAF  NRA  TSRA   BOA  Dooley Gang  BOPP  ROWSS  Scarlet Mask Vigilance Society Great Lakes Freight and Mining Company  Cow Cracker Cavalry   Berger Sharpshooters "I had no Irons in the Fire". "Are you gonna pull those pistols or whistle Dixie"?

Tombstone Runner SASS#54765

Yup Nate is shipping mine tommorow!! Back on the range next week!!
TR
"Did you bring some gold?"
"Nope!"
"Silver?"
"Jus Lead"

Irish Red O'Toole

Drifter,
Let me offer another possibility.  Take it over to Bob Shaw at Walker '47.  He may not like working on 92s but he's a wizard when it comes to fixing them.  He slicked up my 92 carbine and it smokes!!  Should save you the trouble of shipping the rifle off to Texas and back.

Ruff Justice

Howdy Drifter,

I just traded my Rossi 92 off, it sat in peices for almost 2 years when I tried working on it. The instructions are online, I can send you them if you want.

Steve Young is a good bet.
Rufford B. "Ruff" Justice
SASS #16965, WASA #155, GHSS CP-088, Oregon Trail Regulators (Nebraska) #7
RO I & II
Double Barrel C's Land and Cattle Co.
Orlando, FL

Cuts Crooked

To answer Drifters question....yes it will work. I've done it to several Rossi's and one Browning that had the same problem. If you send the gun to Steve he will replace the guide rails (chingasos) with new ones to achieve the same effect.

Another source of this problem is that little spring loaded plunger on the side of the lifter. If it gets crudy and stiff, sometimes it will jam in the depressed position and will allow the lifter to snap up with a bit more authority....sending the shells upwards a bit too fast.
Warthog
Bold
Scorrs
Storm
Dark Lord of the Soot
Honorary member of the Mormon Posse
NCOWS #2250
SASS #36914
...work like you don't need the money, love like you've never been hurt, and dance like you do when nobody is watching..

Williewheelgun

I can sure go along with the 'lift too quick' theory.  My '92 would stovepipe 250 grain (45 Colt), but not the 200's.  Too much inertia with the heavier boolit I would say.  Steve has to be the answer.
JMHO
WW

Foothills Drifter

Howdy......
Thankx for all your replys! I think I might have Bob Shaw @ Walker47 replace the guide rails. I see him at the monthly Pala shoots. Hope for th best.......

Good shootin......
Vern... ;D

SMF spam blocked by CleanTalk
© 1995 - 2024 CAScity.com