44 Heel Base Bullet Comparison

Started by Hoof Hearted, January 18, 2009, 10:19:38 PM

Previous topic - Next topic

Hoof Hearted

So we have discussed the Heel Base bullet in a number of threads here recently.
I figured I'd try the picture thing again. After looking in the training barn, then the house, then scratching my head, I finally called the wife on her cell phone (always safer than face to face conversation) and she told me it was in her purse, in her car :-\ Then I had to carefully detach the ear phones, a hair brush and one of those hair clip things from the strap, in the dark (thank god I carry a tactical flash light in my back pocket). So I got lucky and the dang camera had a charge and the flash card was in it............. Woo Hoo :o



This is a pic showing three different, currently available bullets that I use. The one in the center is Old West (Bernie Rowles) 248gr "Remington" bullet. It is avalable in multiple cavity (I use two cavity) and casts VERY WELL. I find it to be very accurate and with the two lube grooves it carries enough lube for BP and smokeless. The bullet on the left is the exact same mould that has been modified for my Henry "Flat". It weighs 225gr +or- and eliminates the concerns of "chain fires" in the Henry magazine. The bullet on the right is Rapine 415210 and approximates the Colt type 44 round very well. It has a pointed ogive and one lube groove.

Hope this helps!
HH
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Oldelm

Howdy HH,

Thanks for posting those heel bullet comparison photo.  ;D

Just a few questions,...what brass are you using with each of those,...and could the one on the right be a Rapine #451210 bullet rather than the NEI 415210 which you say it is? 

I don't think NEI makes a 415210 mould.......

http://www.neihandtools.com/catpages/mold_pg9.htm





Hoof Hearted

Quote from: Oldelm on January 18, 2009, 10:44:37 PM
Howdy HH,
Thanks for posting those heel bullet comparison photo.  ;D

Just a few questions,...what brass are you using with each of those,...and could the one on the right be a Rapine #451210 bullet rather than the NEI 415210 which you say it is?  ;)

I don't think NEI makes a 415210 mould.......

http://www.neihandtools.com/catpages/mold_pg9.htm

As my 14 year old says, "my bad" ???
I had been discussing NEI moulds with w44wcf o this string:
http://www.cascity.com/forumhall/index.php/topic,24132.0.html
and I had a brain fart (gotta remember the gingko).

The picture shows 44 Colt cases, but 44 Russian works fine also. I can get 28 grains of fffg in the colt case and that is spot on in the Henry to duplicate the original load!
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Oldelm

Quoteand I had a brain fart (gotta remember the gingko).

LOL,.....yep,..I do the same thing.  ;D

The reason I asked about the brass is that the middle cartridge in your photo looks shorter than the ones on the outsides, and it also looks to have a larger rim, so I thought it might be a 44 Russian case.

I'm psyched to have you ream that '75 Rem. cyl. for me so I can start shooting the .44Colt/Russian in my '75 Rem.  ;)

Thanks again!

Hoof Hearted

Ok Oldelm..........

We are going with a .431 throat, right ???
(cause this thread is about heeled .451 bullets)

You know that photo is missleading, must be the curve in the lens ::)
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Oldelm

HH,...yes, I definitely won't be shooting any .451 heeled in my .44 chambered '75 Rem.

QuoteWe are going with a .431 throat, right

....yes, indeed,.....on that .357 cyl you're reaming to .44spl.
Sorry to have interjected my thoughts about that in this .451 heeled thread,
.... as I can see how it could create confusion.

Hoof Hearted

Quote from: Oldelm on January 18, 2009, 11:54:18 PM
HH,...yes, I definitely won't be shooting any .451 heeled in my .44 chambered '75 Rem.

....yes, indeed,.....on that .357 cyl you're reaming to .44spl.
Sorry to have interjected my thoughts about that in this .451 heeled thread,
.... as I can see how it could create confusion.
No, no harm and no foul ;D
I just was wondering which one of us was having a senior moment :-\
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Hoof Hearted

Quote from: Oldelm on January 18, 2009, 11:39:58 PM
LOL,.....yep,..I do the same thing.  ;D

The reason I asked about the brass is that the middle cartridge in your photo looks shorter than the ones on the outsides, and it also looks to have a larger rim, so I thought it might be a 44 Russian case.

I'm psyched to have you ream that '75 Rem. cyl. for me so I can start shooting the .44Colt/Russian in my '75 Rem.  ;)

Thanks again!

Ok Denny

I put my glasses on and looked at that photo, and you are right!!!
I musta grabbed from the wrong box ::)
The center cartridge is a Russian...............
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Bryan Austin

I have posted want adds for photo topics like these. Keep them coming!!!
Chasing The 44-40 Website: https://sites.google.com/view/44winchester

Chasing The 44-40 Forum: https://44-40.forumotion.com

Wolfgang

Hoof Hearted . . . very interesting.  How was the mold  "modified" to produce the flat point bullet on the left of the picture ? . . you did it ? . . or special ordered ?  I might be interested in the same thing but to mold with a hollow base.
Beware the man with one gun, he probably knows how to use it.

Hoof Hearted

Wolfie

Tell me EXACTLY what you are tryig to do (hollow base mould for what caliber/gun combination?).
I have done all of this and have bunches of moulds, I can save you time, money and frustration :P

What Bernie does to "modify" the Remington Mould to this "Henry Flat" configuration is he does actually machine through the nose portion then he installs a corresponding "plug" that is set screwed in place, creating a shorter nose. This shortening of the ogive makes a wider meplat!

HH
Anonymity breeds bravado.......especially over the internet!
http://cartridgeconversion.com
http://heelbasebullet.com
aka: Mayor Maynot KILLYA SASS #8038
aka: F. Alexander Thuer NCOWS #3809
STORM #400

Pettifogg

What is the diameter of the heel section of the Rapine 451210 bullet, at say, BHN 7-10?

SMF spam blocked by CleanTalk
© 1995 - 2024 CAScity.com