Author Topic: Rossi 92 safety  (Read 11486 times)

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1044
  • Liked:
  • Likes Given: 2
Rossi 92 safety
« on: August 26, 2019, 04:10:22 PM »
A lot of people remove the safety flip-lever but has anyone replaced the safety?  If so, was it easy or hard to do?

I want to remove one but concerned that if I do not like the alteration can I return it to original.  Alteration will be my own approach.

Thanks for any comments.
Black River Smith

Offline Jeremiah Jones

  • Top Active Citizen
  • *
  • Posts: 140
  • NCOWS #: 3945
  • Liked:
  • Likes Given: 0
Re: Rossi 92 safety
« Reply #1 on: August 26, 2019, 04:40:31 PM »
One pin to remove to swap safety in/out.  Very easy to remove or replace.  I got my blanking plug from Steve's.
Scouts Out!

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 6647
  • Liked:
  • Likes Given: 75
Re: Rossi 92 safety
« Reply #2 on: August 27, 2019, 09:46:25 AM »

PLUS ONE too Jeremiah    ;D

Use to replace that pesky safety on the top of the bolt frequently.  There is a ball and spring in there so you will want to be careful taking it apart.  Steve's Gunz has a very nice replacement "cap" for the hole.  Quite reversible.

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1044
  • Liked:
  • Likes Given: 2
Re: Rossi 92 safety
« Reply #3 on: August 27, 2019, 12:33:21 PM »
I guess the word I should have used instead of 'replaced' was 're-installed' the safety.  I thought the second line clarified the question line.  Sorry if not.

I know that people remove them and put plugs/fillers into the hole.  But the main question was 'has anyone gone back and re-installed the original safety lever'?

How easy is that?
Black River Smith

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 6647
  • Liked:
  • Likes Given: 75
Re: Rossi 92 safety
« Reply #4 on: August 27, 2019, 02:39:26 PM »

As long as you don't have to chase the small parts, it's about a 10 minute job.  Gun looks a whole lot better without that stupid safety thingie on it.

Advertisers

  • Guest
Re: Rossi 92 safety
« Reply #5 on: Today at 08:08:30 AM »

Offline Black River Smith

  • Top Active Citizen
  • *
  • Posts: 1044
  • Liked:
  • Likes Given: 2
Re: Rossi 92 safety
« Reply #5 on: August 27, 2019, 07:31:09 PM »
Coffinmaker,

Thanks for posting an answer.  Appreciate that.

I agree with you about the appearance of the bolt without that chunk of metal there.  That is why I am debating with myself to take it out.  Just wanted to know what it was like to re-insert if something 'needed to be done' afterwards.
Black River Smith

Offline Cliff Fendley

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 3517
  • Liked:
  • Likes Given: 205
Re: Rossi 92 safety
« Reply #6 on: September 05, 2019, 05:04:05 PM »
As long as you don't have to chase the small parts

Yeah but if you don't have to do that it takes all the fun out of it ;D
http://www.fendleyknives.com/

NCOWS 3345  RATS 576 NRA Life member

Johnson County Rangers

Offline Mickey Lugo

  • Citizen
  • *
  • Posts: 12
  • Liked:
  • Likes Given: 4
Re: Rossi 92 safety
« Reply #7 on: January 04, 2021, 02:20:45 AM »
Yeah but if you don't have to do that it takes all the fun out of it ;D

That darn detent ball is somewhere in the depths of my garage...

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 6647
  • Liked:
  • Likes Given: 75
Re: Rossi 92 safety
« Reply #8 on: January 04, 2021, 10:16:03 AM »

 :)  HA   ;)

I have several of those little detent balls in my Shop.  I have no clue where  ::)  I also have no intent to look for them.  Ever.  At All.  Nope.  Not Me!!

Stay Well

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 889
  • SASS #: 110215
  • Liked:
  • Likes Given: 987
Re: Rossi 92 safety
« Reply #9 on: January 04, 2021, 08:22:50 PM »
They are under the bench with all the dead bugs and mung that accumulates down there if it's anything like mine!
SASS DeaconKC
The Deacon AZSA
BOLD 1088
RATS 739
STORM 448
Driver for Howard, Fine & Howard
Veterinary & Taxidermy Clinic
"Either way, you get your dog back"

Advertisers

  • Guest
Re: Rossi 92 safety
« Reply #10 on: Today at 08:08:30 AM »

 

SMF spam blocked by CleanTalk

© 1995 - 2020 CAScity.com