Author Topic: Homemade 1911 grips  (Read 917 times)

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15905
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 423
Homemade 1911 grips
« on: July 04, 2023, 10:34:19 AM »
I was looking for project, I decided to make a set of Grips for one of my 1911's.
 Having made a few grips for myself in the past that turned out harmoniously, I gave it a shot. 

I made a set, in black walnut, from a small, off cut scrap from a slab from a client's river table.
 These were made for this little pocket pistol.
I sadly sold the pistol and this the best photo I have.


I made a set for 1858 Remington from American Holly (Woodcrafters Supply) but I don't seem to have the photo's  :-\

Anyway, here is the Cocobolo 1911 attempt, here they are final shaped and completely sanded, finish will be bee's wax (Skidmore's hand rubbed several coats)




https://www.bellforestproducts.com/inlay-wood/cocobolo-1160/?msclkid=7c2d3902195d1be5d2545da6342b994b&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%20-%20Wood%20Species%20Products%20-%20US&utm_term=4586337881867148&utm_content=All%20Wood%20Species%20Products
when planets align...do the deal !

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4727
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1214
Re: Homemade 1911 grips
« Reply #1 on: July 04, 2023, 11:50:05 AM »
Excellent!

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15905
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 423
Re: Homemade 1911 grips
« Reply #2 on: July 04, 2023, 12:02:52 PM »
Thank you, Sir
This is some kinda dense wood, hard like a rock and sands beautifully.

I am thinking of doing some in the Holly  :-\

when planets align...do the deal !

Advertising

  • Guest
Re: Homemade 1911 grips
« Reply #3 on: Today at 02:43:29 AM »

Offline DeaconKC

  • Retired Predator Hunter
  • Top Active Citizen
  • *
  • Posts: 1878
  • SASS #: 110215
  • Liked:
  • Likes Given: 4950
Re: Homemade 1911 grips
« Reply #3 on: July 04, 2023, 06:43:26 PM »
First rate!
SASS DeaconKC
The Deacon AZSA
BOLD 1088
RATS 739
STORM 448
Driver for Howard, Fine & Howard
Veterinary & Taxidermy Clinic
"Either way, you get your dog back"

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7676
  • Liked:
  • Likes Given: 125
Re: Homemade 1911 grips
« Reply #4 on: July 05, 2023, 09:16:04 AM »

 :) MAJOR 2  ;)

Those Cocobolo grips are just plain GORGEOUS!!  I would like to share though, When sanding/finishing Cocobolo, wear a mask.  Cocobolo is VERY toxic when ingested.  Toxic enough to be fatal!! :o

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15905
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 423
Re: Homemade 1911 grips
« Reply #5 on: July 06, 2023, 09:48:40 AM »
Thank you, here they are installed & the before and after journey.
  The gun is Cimarron gloss blued Rock Island, Armscor Armory piece I purchased about 10 years ago.
At the time, the Bluing was being done at Ford's in Crystal River Fl. it has held up well.
  The original grips were somewhat lighter in color I believe Philippine Mahogany.
I was not all that enamored with that yellowish hue, so I opted to stain them darker...
 Often considered Faux Ivory for the look but opted out when I shot another (friends) pistol the grips seems slippery and way to whiteish.

Here is the before original OEM's  (then somewhat darker OEM's) and now the Cocobolo grips..

when planets align...do the deal !

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com