Author Topic: Install new front sight  (Read 1602 times)

Offline Dirty Dick

  • Top Active Citizen
  • *
  • Posts: 144
  • Liked:
  • Likes Given: 15
Install new front sight
« on: February 15, 2020, 06:49:35 PM »
It seems I took a little too much off my Pietta SAA .44-40, how do I remove the old blade and install a new one? Is it soldered in place? Don't believe I've ever heard of how it is done.

DD
NRA Life, CSSA, RCA,

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15832
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: Install new front sight
« Reply #1 on: February 15, 2020, 09:29:45 PM »
It is either silver soldered in or if you're lucky staked

when planets align...do the deal !

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Install new front sight
« Reply #2 on: February 16, 2020, 09:31:44 AM »

Choice # 2.

You might consider a "Sure Hit" front sight.  The Sure Hit fits over the OEM sight and is glued on.  Deliberately trying to remove the OEM sight will NOT be fun.  Damage to the guns finish is virtually assured.

Advertising

  • Guest
Re: Install new front sight
« Reply #3 on: Today at 04:26:05 AM »

Offline Lucky R. K.

  • Purveyor of Fire & Brimstone
  • Top Active Citizen
  • *
  • Posts: 420
  • Liked:
  • Likes Given: 1
Re: Install new front sight
« Reply #3 on: February 16, 2020, 10:34:17 AM »
If you are equipped, mount the gun on a mill and cut a 3/8" dovetail thru the old sight. Buy a new sight and insert.

Lucky
Greene County Regulators       Life NRA             SCORRS
High Country Cowboys            SASS #79366
Gunpowder Creek Regulators   Dirty RATS #568

The Wind is Your Friend

Offline Coal Creek Griff

  • Top Active Citizen
  • *
  • Posts: 2078
  • Liked:
  • Likes Given: 634
Re: Install new front sight
« Reply #4 on: February 16, 2020, 10:49:53 AM »
Well, I'll give you my experience. Several years ago, I was attempting to turn the barrel to correct the windage. The barrel slipped in the jig and the front sight popped out. It didn't appear to be soldered, but simply pressed into a groove in the barrel. I filled the groove with J-B weld, and pressed the sight back in. An advantage was that the windage was also corrected at the same time.

I can't say that all guns are like mine, but it did not appear to be soldered at all.

CC Griff
Manager, WT Ranch--Coal Creek Division

BOLD #921
BOSS #196
1860 Henry Rifle Shooter #173
SSS #573

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Install new front sight
« Reply #5 on: February 16, 2020, 03:15:44 PM »

Ahhhh NO!!  Very serious consideration here.

Lucky, if you cut a Dovetail into the barrel and install a from sight by that method, the gun is no longer legal for SASS CAS.  Now, IF Dirty Dick does NOT intend to play the Game, it would be my first choice (I like dovetail sights). 

The "Shur Hit" front sight is the easiest, simplest and quickest method.  Plus it allows some more "adjustment" to point of impact.  Then we have the old rule.  You cannot put the metal back.  File an itty bitty bit, shoot.  File and itty bitty bit, shoot.  When it gets close .... STOP.  Chances of getting the elevation absolutely perfect is near ZERO.  Close really does count.

Offline Coal Creek Griff

  • Top Active Citizen
  • *
  • Posts: 2078
  • Liked:
  • Likes Given: 634
Re: Install new front sight
« Reply #6 on: February 16, 2020, 03:32:19 PM »
To clarify, the slot for the front sight on my Pietta is parallel to the bore and the width of the sight. I've replaced a few front sights on my Italian revolvers and so far found them to be simply pressed into the slot with a friction fit. My guns may be unique in that regard, but it has worked for me.

CC Griff
Manager, WT Ranch--Coal Creek Division

BOLD #921
BOSS #196
1860 Henry Rifle Shooter #173
SSS #573

Offline Dirty Dick

  • Top Active Citizen
  • *
  • Posts: 144
  • Liked:
  • Likes Given: 15
Re: Install new front sight
« Reply #7 on: February 17, 2020, 03:04:33 PM »
Thanks, Coffinmaker, for the info. Where can I purchase a Sure Hit front sight?  None of the vendors I've looked at have them.

DD
NRA Life, CSSA, RCA,

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4672
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1180
Re: Install new front sight
« Reply #8 on: February 17, 2020, 03:07:24 PM »
Coffinmaker is probably busy sawing off a barrel.  Here ya go:

http://www.slickmagicguns.com/SureHitSights.html


Offline Dirty Dick

  • Top Active Citizen
  • *
  • Posts: 144
  • Liked:
  • Likes Given: 15
Re: Install new front sight
« Reply #9 on: February 17, 2020, 05:40:18 PM »
Thanks, Abilene, SO many vendors and sources of information for this newbie!

DD
NRA Life, CSSA, RCA,

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: Install new front sight
« Reply #10 on: February 17, 2020, 06:01:28 PM »

 :o   Abilene, How'd you know    :o   I just turned my Evil Twin Hacksaw MacGurk loose just today.

 ;Dirty Dick  ;D   Lurking in the weak and sordid minds of our electronic denizens is sufficient combined knowledge to absolutely bury you in INFORMATION.  Some of it is even useful  ;D   Trust Me, we are capable of keeping you completely CONFUSED.  ::)

Offline Cholla Hill Tirador

  • Top Active Citizen
  • *
  • Posts: 565
  • Liked:
  • Likes Given: 16
Re: Install new front sight
« Reply #11 on: February 18, 2020, 03:19:25 AM »
  The two I've messed with, both Uberti's, were soldered in. One has an antiqued finish so I didn't mind doing the remove and replace myself, which was fairly simple. The other, a Cimarron Model P, had a nice blue finish so I took it to a local 'smith who charged me $25.

   CHT

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com