Cas City Forum Hall & CAS-L
CAS TOPICS => The Leather Shop => Topic started by: StrawHat on March 27, 2024, 09:08:02 AM
-
Here is a new scabbard for a 4”, N frame with fixed sights.
Kevin
Hmmm, not able to post images, too big? Oh well…
-
If you can get those photos reduced in size, they would be most welcome here. That holster is outstanding.
If you need to resize your photos in Windows, Faststone Photo Resizer (https://www.faststone.org/FSResizerDetail.htm) works great. (http://Faststone Photo Resizer)
In Linux, gThumb is the easiest I've found. It's installed from the Software Manager. I make photos 640 x 480 pixels and never have a problem with them.
On a Mac, I'm not sure, having had little experience with them.
-
Let’s see if it works today.
Kevin
-
Wow! Okay, here is a view of the welt. Mike skived the layers to produce a tapered welt. The scabbard is built so the welt is tight to the frame of the handgun and forces the sidearm into the fold of the holster. This acts as the retention so no retreat straps or things are needed.
Kevin
-
Here is the back of the holster. The stitching on original scabbards is often the signature of the maker and is used to identify who built the scabbard.
-
Here is the toe of the holster. It is sewn closed and sewn to the fender. A small leather wedge kicks the muzzle out and forces the handle to lay close to the body of the wearer.
Kevin
-
I can hold them like this until my arms gets tired and it will not fall out. But, a simple pull upward while the holster is belted, allows for a fast, smooth draw.
Kevin
-
The way it rides on my belt.
Kevin
-
I mentioned the fit of the welt. Properly done, the holster fits only the revolver for which it was made. In my case, I had it built for a 45 ACP, 4” barrel, fixed sights with the reinforced ejector lug, aka, Model 22-4. Here is how an adjustable sighted version of that revolver sits in the holster.
It sits way high. A proper holster does not fit a variety of revolvers, that is a bucket.
Kevin
-
Mike did a very good job on this holster, considering it was his first attempt at one. He says he has learned a lot and the next one won’t take as long. I am already planning my next one!
Kevin
-
His First ? !!!! :o that holster is fabulous, it suits the Smith beautifully.
Here is little help with the photos. :)
-
:) Absolutely DYNAMIC!! :o ;D
-
His First ? !!!! :o that holster is fabulous, it suits the Smith beautifully.
Here is little help with the photos. :)
Yes, that is the first one Mike made. He said he learned a lot about holsters building that one. The next one will come together quicker!
Kevin