Author Topic: !887 Replica Help  (Read 1200 times)

Offline NCRanger

  • Active citizen
  • *
  • Posts: 38
  • Liked:
  • Likes Given: 5
!887 Replica Help
« on: June 30, 2020, 04:09:00 PM »
Thought I would share my success with you pards. I have an 1887 Chinese replica imported by Century Arms (PW87). I purchased it in 2014 and sent it to Coyote Cap who had it four four years (he got sick and couldn't work). I got it back last year and I enjoy shooting it in matches even though it can be slow (technique is everything).
The success I want to share and some of you may already know, so forgive me for ploddin' on. As ya'll know the 1887 was made to shoot 2 1/2" brass shotshells. The reason people have problems with it running consistently is because the PW87 doesn't care for 2 3/4" shotshells. The crimp tends to catch on the chamber mouth during ejection. I was told the Chinese replica was redesigned somewhat for 2 3/4" shotshells but I don't see it. Dimensional wise it is the same as the original.
A simple solution is to buy a case ($110.00) of RTS, 2 1/2" shotshells. https://rstshells.americommerce.com/store/p/8-12-Ga-2-1/2-Lite-Vel-1175-1-oz-Load-Case.aspx

They are plastic and reloadable and they work. MEC sells an adapter plate for their loader for 2 1/2" shotshells. I load 1 ounce of 7 1/2 shot over 16.5 -17 grains of Red Dot powder with a Winchester plastic wad. I had to develop that load myself because there is not a lot of load data for 2 1/2' shotshells.
Bottom line is the 2 1/2" shotshells run consistently in the PW87 and you can shoot just as fast as you can drop two in at a time. You still have to drop the lever all the way down, but it seems to eject smartly every time.

"Long days and pleasant nights!"

Offline cpt dan blodgett

  • Top Active Citizen
  • *
  • Posts: 1693
  • SASS Conv 2013
  • Liked:
  • Likes Given: 3
Re: !887 Replica Help
« Reply #1 on: July 13, 2020, 04:48:33 PM »
Thanks for the recommendations
Queen of Battle - "Follow Me"
NRA Life
DAV Life
ROI, ROII

Offline Curtis264

  • Very Active Citizen
  • *
  • Posts: 75
  • Liked:
  • Likes Given: 2
Re: !887 Replica Help
« Reply #2 on: July 17, 2020, 08:08:37 PM »
I have a Chinese 1887, I took it apart and polished the surfaces inside the shotgun. I use some pretty hot buck shot load, 10 pellets 00 over 32 gr of long shot and 1 3/8 ounces of number 6 over 25 gr of longshot and the shotgun handles them all, I have had zero problems with feeding or ejection and this is all 2 3/4 reloads

Advertising

  • Guest
Re: !887 Replica Help
« Reply #3 on: Today at 06:40:11 AM »

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com