Caliber Change

Started by Tascosa Joe, December 30, 2021, 05:44:00 PM

Previous topic - Next topic

Tascosa Joe

A crappy 92 in 25-20 wandered into my workshop a few weeks back.  I have been scrubbing the bore for weeks and I believe it is not salvageable.  Is a 1906 "92 capable of handling a .357 Maximum?
NRA Life, TSRA Life, NCOWS  Life

Sir Charles deMouton-Black

Just a WAG, but wouldn't you have to stick with an overall length in the same ballpark as the 25-20? 
NCOWS #1154, SCORRS, STORM, BROW, 1860 Henry, Dirty Rat 502, CHINOOK COUNTRY
THE SUBLYME & HOLY ORDER OF THE SOOT (SHOTS)
Those who are no longer ignorant of History may relive it,
without the Blood, Sweat, and Tears.
With apologies to George Santayana & W. S. Churchill

"As Mark Twain once put it, "History doesn't repeat itself, but it does rhyme."

Trailrider

Rebore or rebarrel to 32-20?
Ride to the sound of the guns, but watch out for bushwhackers! Godspeed to all in harm's way in the defense of Freedom! God Bless America!

Your obedient servant,
Trailrider,
Bvt. Lt. Col. Commanding,
Southern District
Dept. of the Platte, GAF

greyhawk

Quote from: Sir Charles deMouton-Black on December 30, 2021, 06:17:32 PM
Just a WAG, but wouldn't you have to stick with an overall length in the same ballpark as the 25-20?

correct!!!!

greyhawk

Quote from: Trailrider on December 30, 2021, 08:00:51 PM
Rebore or rebarrel to 32-20?

This  (25/20 to 32/20) is easy all ya got to do is change the barrel (or rebore it and re fit it)

Anything else (that changes rim diameter and case body diameter) gets seriously difficult 
Alterations to the innards are required and some of it is tricky gunsmithing - cartridge lifter, magazine stopper, feed rails, If ya can buy Rossi parts maybe 357 mag ?

Been there done it  25/20 to 38/40

Tascosa Joe

I figured as much on the conversion to .357 Max.  A lot of these were converted to .357 in the '50s and '60s.  My preference would be 38WCF, but I knew that would be a problem and I have a real nice one and a real good shooter.  I'll have to figure out what I want to do with it.  Thank all y'all for your input.
NRA Life, TSRA Life, NCOWS  Life

Niederlander

You can find good barrels in .32-20 or .25-20 occasionally in e-Bay.  That would probably be the best fix.  Having it rebored to a .32-20 would be better yet.
"There go those Nebraskans, and all hell couldn't stop them!"

Ranch 13

  Maybe just have that barrel relined and chambered back in 25-20?
Eat more beef the west wasn't won on a salad.

SMF spam blocked by CleanTalk
© 1995 - 2024 CAScity.com