Recent Posts

Pages: 1 2 3 4 5 [6] 7 8 9 10
51
Pictures of the Lyman 311299 mold:
52
Pictures of the Lyman .454 round ball mold:
53
I have three bullet molds for sale.  Items may also be listed elsewhere and are subject to prior sale.

Add a flat $10 for shipping for any number of items.  I will combine shipping with my other listings.

I prefer payment by GunTab (I will cover all fees), PayPal or Zelle, or money order or cashier's check.

$100 - Modern-Bond J-311-890 .30 cal FP GC double-cavity bullet mold with handles.
This is a rare vintage bullet mold.  Per this website the J-311 is intended for .30-30, .30-40, and other .30-caliber rifles and casts a 165-grain bullet.  https://www.castpics.net/subsite/HistMolds/ModernBondMolds.html
I haven't used it, but it appears to be a round-nose, flat-point, gas-checked design with two lube grooves and two crimp grooves.  (And that's old oil on the mold blocks, not rust.)

$20 - Lyman 454 two-cavity round ball mold (no handles).  Light rust - see pictures.

$40 - Lyman 311299 single-cavity mold (no handles).
This is in the vintage orange cardboard Lyman Ideal box.  A previous owner wrote on the box "303 British" and it presumably works for that or could probably be sized down to .309 for .30 caliber rifles.  Should cast about a 200 grain bullet with two lube grooves and a gas check base.  I have not personally used this mold.


Pictures of the Modern-Bond bullet mold:
54
Pictures of the RCBS powder measure stand, Uniflow large micrometer adjustment stem, and RCBS universal hand primers.
55
CAS City Classifieds / WTS Lyman and Saeco powder measures
« Last post by Hair Trigger Jim on February 01, 2024, 06:03:10 PM »
I have various reloading tools for sale.  Caveat - don't buy all of the powder measures, as I want to keep one in case I want it sometime.  I haven't used any of these measures yet though, so I'm selling them because I have bought much more than I need, and my wife thinks I buy more than I can afford.  :)  Items may also be listed elsewhere and are subject to prior sale.

Add a flat $10 for shipping for any number of items.  I will combine shipping with my other listings.

I prefer payment by GunTab (I will cover all fees), PayPal or Zelle, or money order or cashier's check.

More pictures available upon request.

$40 - Older orange Lyman 55 without box.
This one only has the small drop tube, and the clamp is missing the flat clamping surface.  Still quite usable, of course.  The parts all move well.  Missing the cover for the powder hopper.

$50 - Older orange Lyman 55 with original box.
This one is a little stiff; I disassembled it and brushed off the parts, but you might want to scrub them a little more.  The parts are all there including both large and small drop tubes.

$60 - newer Lyman 55 with a baffle, plastic hopper lid, etc.  Looks very new.
Only has a small drop tube, but does have the adapter for screwing into a press etc.

$60 - Saeco powder measure and stand.  Missing the hopper but has threads for one.  A handy person could rig something up.  And what reloader isn't handy?  I just haven't gotten around to it yet.

$25 - RCBS powder measure/piggyback stand.

$40 - RCBS micrometer adjustment stem (large) for RCBS Uniflow powder measure (powder measure not included).
This allows you to quickly reset the powder measure to predetermined settings; once you figure out the setting for a certain charge, you just record it and you can easily reset the measure for that charge.  I have not personally used it and do not currently have a Uniflow.

$40 each or $75 for both - two RCBS universal hand primers.
These are the "universal" hand primer that don't use a shell holder; they have little jaws with a spring around them.  One has an "S" written on the box and the priming tool by a previous owner, and the other one has an "L" written on box and tool, but they both have the parts for both large and small primers.
56
Pictures of the .32 W.C.F., .38 W.c.F., and .45 S&W Schofield dies.
57
I have several reloading die sets for sale.  Items may also be listed elsewhere and are subject to prior sale.

Add a flat $10 for shipping for any number of items.  I will combine shipping with my other listings.

I prefer payment by GunTab (I will cover all fees), PayPal or Zelle, or money order or cashier's check.

I have several more pictures of each available if you PM or email me.

$20 - .223 WSSM - Lee dies, no shell holder or paperwork.

$20 - .257 Ackley Improved - Lee dies.
This box includes the shell holder and paper but is missing the lid.
The sizing die is marked for .257 Ackley and the seating die is the same as the .257 Roberts.


$25 - .257 Weatherby Magnum RCBS dies with extra seating die.
Dies are marked 66 (or 99?).  The sizing die is missing the expander/decapping stem, but there's a new one from RCBS on its way here, and it will be included.
Includes an extra RCBS .257 Weatherby seating die that's rather rusty.  You can pitch it (or tell me not to send it) if you don't want it.

$40 - 7mm WSM Hornady dies.
One of the hinges on the box is broken.  Minor surface rust (they came to me that way, but I've heard it's common on Hornady dies in wet climates).

$40 - .32-20 Lyman 3-die set.
This is an older set in the cardboard box (without a lid); comes with die wrench.  The expander die is an M die marked 31R on the top.  The seating stem is RNFP profile and is marked 8 on the top.  These have a couple very minor rust spots.  (Seriously very minor, but I didn't want to describe it falsely!)

$35 - .38-40 Lee 3-die set, like new (might be actually new?).

$35 - .45 Schofield Lee carbide 3-die set.
The sizer is marked .45 Colt; the expanding and seating dies are marked for the .45 Schofield.
This is a 3-die set in a 4-die box.  If you only need a 3-die box, I'll swap it with one of my Lee boxes and I'll keep the 4-die box, and I'll take $1 off the price.
58
CAS City Classifieds / ISO Factory Mainspring 1866 Uberti
« Last post by DeaconKC on February 01, 2024, 09:47:02 AM »
Yup, looking for a factory mainspring for a 66 Yellowboy. Anybody got a takeoff laying around? Lemme know how much you want for it.
59
CAS City Classifieds / Re: Brass extravaganza! Shotgun, rifle, and pistol!
« Last post by Hair Trigger Jim on January 29, 2024, 06:21:40 PM »
All the 44-40, if still available.

Uncle Green, can you please email or message me?  Thanks!
60
CAS City Classifieds / Re: Shiloh Sharps 45/70 take off barrel. $225 shipped
« Last post by Doc Waxham on January 29, 2024, 11:29:34 AM »
Yes it is.
Pages: 1 2 3 4 5 [6] 7 8 9 10
SMF spam blocked by CleanTalk
© 1995 - 2023 CAScity.com