Special Interests - Groups & Societies > Spencer Shooting Society

Arghh - owners of Taylor's in Pistol Caliber...I NEED You!!

(1/2) > >>

Gunner:
 >:( What a day, the match started out great - a 14, yes 14, shot string with my Spencer. It did work flawless - and I had a clean stage to boot!!!
Then on the next 2 stages, I suffered the inglorious jams caused by the right extractor (that originals do NOT have) or my ham-handedness.... :-[.
After that I retired her for the day. :o
What I am curious about.. - I need everyone who has a Taylor's in .45 S&W or .44 Russian to look at soemthing for me and report back.
-When you remove your breech block - as in taking it ouit to clean - look at the "hole" where the shells come out of magazzine tube into the action.  Is it centered, or is it off to one side or the other???? ???
With my carbine on her "back", looking into the action, the opening of the mag tube is off-center, to the left side (the same side as the right extractor). I'm starting to thing that the shells are coming into the action crooked and causing my problem.  Am I nuts, or is this the ultimate problem??
Help, members of SSS....rally to the colours and ride to the sound of the guns....

Col. Moultrie:
Sorry to hear you had problems, Gunner.  I know you were excited about shooting it last weekend.  As you know, I have an original - a Burnside Contract - not a repro, so I don't have the right extractor, but if you shot two flawless sets of shells through her in the first stage, then I would guess that the problem is not with the magazine tube, but with the operator  :).

One likely cause would be overall cartridge length.  In the .56-50, if a cartridge isn't just right - if it's either too short or too long - the sucker will hang up and jam.  Remember what happened to me one year at Blue Mt.?  I know it's possible that some of the lube from bullets can get into the seater die on your reloader - at least that happens to me with the cheap .45 bullets I shoot in .45 Colt - and then your rounds start coming out marginally shorter.  It really doesn't matter much in a revolver, but it certainly could in the Spencer.

Perhaps if you make up some dummy rounds to OAL specs and then cycle them through the gun at home, you could see how they feed, first slowly, and then at speed.  If they work flawlessly, then you know it's the ammo you used on those stages, not the gun.  If they work sometimes, but not others, then it's either the gun or the way you're working the lever (which ultimately comes down to the gun as well, but may or may not be fixable).  It may be that you feed the rounds smoothly when you work the lever slowly, but do something different when you get excited.

If you really want to get into this, have Deadeye Donna run videotape of the breech/action as you "shoot" the dummy rounds both slowly and fast.  Then you can watch (and if necessary frame-by-frame) the shells as they come out of the magazine and get levered into the breech.  That's pretty involved, however, and might be a heck of a lot of trouble.

Good luck with it, and if it fails, I'll trade you sight unseen for my cheapo o/u derringer... ;D

Gunner:
Howdee Perfessor, er...Colonel Moultrie ;),
It sure is great to hear from you...(waiting to hear about little Baby Moultrie ;D).
I reckon I could be hamhanded....(sigh) :o.
But I still would like to know if my mag tube is straight or crooked (off-set) in the butt stock...

Hey, does this mean you are going to join the SSS?? We'd love to have on board!!

major:
Gunner
I have the Armisport Spencer in 44 Russian.  I took the action out and looking in from the bottom my tube is off to the right.  Hope this helps.
Terry

Gunner:
Thanks to all who replied to me here and via e-mule...well, it appears that I am ham-handed  :( :o (sigh).

Advertisers:

Navigation

[0] Message Index

[#] Next page

Go to full version
Powered by SMFPacks Ads Manager Mod
Powered by SMFPacks Likes Pro Mod
Powered by SMFPacks Menu Editor Mod