Author Topic: Lee Shaver Lube Extruder  (Read 494 times)

Offline PJ Hardtack

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3796
Lee Shaver Lube Extruder
« on: September 25, 2018, 01:42:34 pm »
I ordered a Lee Shaver Lube Extruder to facilitate making grease cookies for my BP 45-70 loads.

It didn't work. All I got was a mess of expensive SPG curling out between the die and the extruder. >:(

Then I decided to change the die from a .458 to .427 to see if that helped and noticed that I had not installed the lock nut around the die body in the Lyman  luber/sizer ....  ::)

I installed the lock nut and behold - I got a nice ribbon of lube 1/16" x 1/2" ....  ;D

This after I called Lee and told him his extruder didn't work. He offered to send me a new extruder free of charge. I'm going to tell him to bill me and I'll pass it on to a friend.
"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne