Chinese made 1887 Winchester 12ga Lever Action Shotgun

[Wannabe Cowboy]

Any opinions on this piece? I put a few rounds through one last week, was impressed. Thinking seriously of getting one. Talk to me. Thanks.

[Crooked Creek Kid]

The one I have works great right out of the box.  Some folks have had a minor problem or two but nothing serious that I am aware of.  Go to Coyote Caps web site and you can learn quite a bit from him.  A friend of mine had some problems with with the two shot feed.  i thought the shotgun was pretty smooth as is but Coyote Cap can really make them hum.  I think they're a lot of fun!    

[Wannabe Cowboy]

Oops....now I see that there are a few topics related to this shotgun. Sorry for posting this before reading the rest.

[Advertising]

[h c ramrod]

mine works fine but the one i sold to my buddy had problems ejecting the spent shell, it wouldnot clear the chamber . I looked it over and found i had to mill away some of the botom of the bolt face to alow the spent shell to come further back and clear the cahmber....... it works fine now..... h c ramrod..

[gotzguns]

love mine. worked perfactly right out of box. haven't tried brass shells yet but plan to soon. will post results. gotzguns

[LZ Walker]

I have a very early one, #00014**, and it jammed so tight on it's very first round that it had to beaten clear with a rubber mallet. Seriously. The forward portions of the bolt runner guides appeared to be machined with a wood rasp. The gun was new, and the bolt was still blued. I spent about 2 hours with a flexi-Dremel polishing, and she has rattled through about 6 boxes of shells, now. She's fine, and I have no intention of getting rid of her. Might also add that I have traded for a Taurus Thunderbolt. Might be that I simply enjoy the "trouble-makers?" haha!

LZ Walker

[LZ Walker]

Whoa! my bad! I misread that! Mine is an 1897 PUMP. nevermind! haha

LZ

[Marshal Tac]

I got about 6-7 boxes of shells through mine with no problems... just got to learn how to work the gun.. the "drop 2" loading takes some practice and you have to be sure to run that lever all the way forward and keep it there when cycling it or loading it. Mine is bone stock... I have also ran about 2 boxes of holy black thru it without any problems. Alot slower than my side by side, but alot more fun.

[litl rooster]

I got about 6-7 boxes of shells through mine with no problems... just got to learn how to work the gun.. the "drop 2" loading takes some practice and you have to be sure to run that lever all the way forward and keep it there when cycling it or loading it. Mine is bone stock... I have also ran about 2 boxes of holy black thru it without any problems. Alot slower than my side by side, but alot more fun.

I haven't ran but a couple boxes of shells (the Dark kind..............but have to agree. My double's are faster...But the Lever is fun

[Marshal harpoluke]

I haven't ran but a couple boxes of shells (the Dark kind..............but have to agree. My double's are faster...But the Lever is fun

Mine works great with Da Holy Black out of the box,  but I love My 1901 10ga origanal, it not only works perfectly, the Might 10 vaporizes the targets.

 

 

 

[Mad Mucus]

I was tempted to buy one, but I can wait for next years' Aussie made model 1887/1901 12g. 

ADI/Lithgow are supposed to be releasing an anniversary model in 2007, for the local and international market, available in long or short barrels. Of course it will be a tad more expensive.

Apparently they've back engineered it to iron out the faults, tested some prototypes with good results, and are on track for production.

Here's hoping all goes well !

Mucus

[litl rooster]

  I got to play with mine over the past weekend.............I found that the AA type shells work better than the Brass shells do....This also what Coyote Cap recommended for use.

[RRio]

I was tempted to buy one, but I can wait for next years' Aussie made model 1887/1901 12g. 

ADI/Lithgow are supposed to be releasing an anniversary model in 2007, for the local and international market, available in long or short barrels. Of course it will be a tad more expensive.

Apparently they've back engineered it to iron out the faults, tested some prototypes with good results, and are on track for production.

Here's hoping all goes well !

Mucus

Only problem is, American shooters have been waiting over 6 years for the Aussie '87. I don't know many in the US that was able to get one.

My IAC '87 works just fine.

[El Loco]

I had two inches cut off the stock, an inch recoil pad on and some oiling and now it's a hoot.
Just have to work that lever hard...
Oh !   had a 'smithy thread the barrel for winchokes too.

Isn't life great ?
Rather play with a Chinese one now and wait for our Aussie made.

Kirby.

[Kid Raven]

Just have to work that lever hard...
Kirby.

Like I told a pard last weekend, “Drive it like you stole it”.