Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
December 11, 2018, 10:38:07 am

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  The Barracks (Moderators: Delmonico, Pitspitr)  |  Topic: Military bolt guns—Is there a proper way to screw it all together? 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Military bolt guns—Is there a proper way to screw it all together?  (Read 335 times)
Baltimore Ed
Top Active Citizen
*
Online Online

Posts: 918



« on: October 08, 2018, 10:38:39 am »


Just curious, is there a correct [military armourer approved] way to secure a military bolt gun’s action/bbl to it’s plain jane walnut milsurp stock? No glass bedding, nothin fancy etc. Front action screw first, then the rear, tight as possible. Torque wrench needed. Or screw them down evenly and tighten them at the same time? Just wondering. Does it matter? Should it matter? If it makes a difference accuracy wise do I have stock issues? I’m thinking as well secured as a military action/bbl is secured to it’s stock with the action screws, lower bbl band and front bbl band, full stock and handguard, I wouldn’t think that it would matter as long as everything is tight.
Logged

"Give'em hell, Pike"
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 3320



« Reply #1 on: October 08, 2018, 04:34:27 pm »

Snug it down with the action screws, but no barrel bands.  If the barrel is lifted out of the stock, shim accordingly until the barrel lies down in the stock channel. Put it all back together with the action screws 1/2 turn past snug.
Logged

Civilize them with a Krag . . .
Pages: [1] Go Up Print 
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  The Barracks (Moderators: Delmonico, Pitspitr)  |  Topic: Military bolt guns—Is there a proper way to screw it all together? « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.044 seconds with 21 queries.