Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Welcome, Guest. Please login or register.
Did you miss your activation email?
January 21, 2018, 03:13:23 pm

Login with username, password and session length

Search:     Advanced search
* Home FlashChat Help Calendar Login Register
Currently there are 0 Users in the Cas City Chat Rooms!
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  The Barracks (Moderators: Delmonico, Pitspitr)  |  Topic: Chiappa Sharps M1863/1868 50-70 carbine (now with pictures) 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: Chiappa Sharps M1863/1868 50-70 carbine (now with pictures)  (Read 1138 times)
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 2926



« Reply #25 on: January 11, 2018, 05:58:58 pm »

https://www.amazon.com/Shooting-Buffalo-Rifles-Old-West/dp/1879356929/ref=asap_bc?ie=UTF8


Entertaining read, lots of good info.

https://www.trackofthewolf.com/Categories/PartDetail.aspx/272/4/BOOK-SPG

Another good one to have on the shelf.
Logged

Civilize them with a Krag . . .
RattlesnakeJack
Top Active Citizen
*
Offline Offline

Posts: 1527



WWW
« Reply #26 on: January 11, 2018, 10:17:11 pm »

 Thanks for adding the photos, Chuck ... sweet looking carbine!   Grin
Logged

Rattlesnake Jack Robson, Scout, Rocky Mountain Rangers, North West Canada, 1885
Major John M. Robson, Royal Scots of Canada, 1883-1901
Sgt. John Robson, Queen's Own Rifles of Canada, 1885
Bvt. Col, Commanding International Dept. and Div.  of Canada, Grand Army of the Frontier
Old West ClipArt & History Website:  http://rattlesnakejacks.com/
PJ Hardtack
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 3326


« Reply #27 on: January 12, 2018, 12:58:16 pm »

You can make the loading of BPCR rounds in any calibre as labour intensive as you want. Simple is better, especially if you like shooting more than reloading.

A pal of mine (who no longer shoots due to failing eyesight and other health issues) used to go the whole nine yards - weighing/sorting  bullets, weighing charges, checking cases for concentricity, wall thickness, indexing bullets and cases, etc., etc. Because I had the guns, he wanted to drag me along this route.

I told him that I'd quit shooting first. Paper patching? It is to laugh ..... It's enough of a PITA to make up paper cartridges for my '63's.

I cast good bullets, anneal, trim, put cases thru' my RCBS case prep machine, weigh charges 'lectronically, taper crimp. That's all, folks.
Logged

"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 2926



« Reply #28 on: January 12, 2018, 09:35:45 pm »

I want to make an observation:  I've been looking at a lot of pictures and video of this carbine since receiving it.  Google "McNelly Sharps" to see what I mean.  Most date from 2013 or earlier, the time when Beliveau made his video, sparking a surge of interest in this particular model.  Looking at these pictures and video, I see a startling visual difference in these guns then and now.  The metal finish then was dull, mottled grey.  Some photo's show virtually no case color at all.  Some of the photo's show the classically ugly Italian red packing box wood.  Even Believeaus video shows a very bland, blond hardwood.   

If my gun is a good example, in the last 5 years someone at Chiappa has made a real effort at improving these guns, at least from a visual/wood/finish standpoint.   I can also see the front sight was changed from a one piece barleycorn to a practical shooter friendly changeable blade type.   Though I cannot see internals of course,  still I find this encouraging.
Logged

Civilize them with a Krag . . .
PJ Hardtack
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 3326


« Reply #29 on: January 13, 2018, 08:07:06 pm »

I omitted a couple of other steps I do when loading BPCR rounds ....

I FL resize my brass, drop tube with a 24" stainless steel tube and use a compression die on top of a thin card wad for 45-70. For 50-70, I use the bullet for compression with no wad.

Works for me.

Re: the quality of your Chiappa carbine .... when you posted the pics, my reaction was "Wow! That is one very nice rifle." If yours is typical, they have a winner.
Logged

"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 2926



« Reply #30 on: January 13, 2018, 09:02:47 pm »

I'm quite happy with it.  I plan on shooting 2 Matchs with it in march, both our local CAS match, and our Missouri Muster one week later.  I'm looking forward to it.  I have Croft Barkers book ordered BTW.  I have his .43 Spanish book as well.
Logged

Civilize them with a Krag . . .
1961MJS
Very Active Citizen
*
Offline Offline

Posts: 68


« Reply #31 on: January 14, 2018, 11:41:18 am »

Re: the quality of your Chiappa carbine .... when you posted the pics, my reaction was "Wow! That is one very nice rifle." If yours is typical, they have a winner.

Hi

From my standpoint, Chiappa's quality isn't typical.  I own two, a Chiappa Cavalry Sharps Carbine in .45-70.  The trigger pull was over 10 pounds and the rear sight ladder was completely worthless.  My 1911 gunsmith took the Cavalry gun and just stoned the bearing surfaces and now the trigger pull is about 5 pounds.  No spring work or metal removal.  

I also have a Chiappa 1886 .45-70 Lever gun that is just beautiful.  The out of the box trigger pull was 5 pounds.  I also don't have a load worked up for it.

Later
Logged

Mike
GAF #797
PJ Hardtack
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 3326


« Reply #32 on: January 14, 2018, 06:26:12 pm »

Do you want a couple of recommendations?
Logged

"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 2926



« Reply #33 on: January 14, 2018, 08:47:06 pm »

More pictures.  If you look, you can make out the assembly number: 7.  Lucky number?  Stamped on the metal parts, written in pencil on the wood.  Maybe they take a bit more time with the .50s?  Probably don't make a lot of them.


* DSCN0048 (1024x624).jpg (329.48 KB, 1024x624 - viewed 18 times.)

* DSCN0049 (1024x698).jpg (374.18 KB, 1024x698 - viewed 18 times.)

* DSCN0050 (1024x525).jpg (260.41 KB, 1024x525 - viewed 17 times.)
Logged

Civilize them with a Krag . . .
1961MJS
Very Active Citizen
*
Offline Offline

Posts: 68


« Reply #34 on: January 14, 2018, 10:46:52 pm »

Do you want a couple of recommendations?

If you mean me, yep.  Can't hurt.  I DID get a sight that works better, but I DO need to shim it.

Later
Logged

Mike
GAF #797
PJ Hardtack
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 3326


« Reply #35 on: January 15, 2018, 12:48:09 pm »

Drydock has covered the BP recipe. Mike Venturino first mentioned it in his book on BPCRs.

For smokeless, try 28 grs 5744 with the 450 gr Lyman 515141 or Rapine 375 gr bullet. The latter is out of print and you may have to hunt for an equivalent.

The 5744 load shoots to the same point of aim as the BP loads - with MY rifle. You get some unburned powder grs. Big deal.

Incidentally, the same powder 5744 charges work in the 45-70 with the Lyman 457193 420 gr RNFP and the RCBS 350 gr RNFP.
Logged

"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 2926



« Reply #36 on: January 16, 2018, 08:22:00 pm »

https://www.buffaloarms.com/brass-oak-drop-tube-for-black-powder-cartridge-droptube2

I would add, for any cartridge of greater than 40 grains capacity, I think a drop tube is vital.  Drop tube loads burn cleaner, and make possible single digit standard deviations.   I don't do much else in the way of precision loading, but I do use a drop tube.  It's the best way to consistently settle the powder.  And consistency is everything in the BP rifle cartridge.  Bullet, bullet lube, powder, powder settling, powder compression, primer, all need to be consistent for best results,  

A BP rifle cartridge need only be a proper BP lubed bullet, powder and primer.  But those 3 components need to be loaded as consistent as possible.  Do that, and 3 moa is easy.  That's all you need for combat/field use.  Especially if it's one of the straight cased American rounds.

The above is a nice one, and it also shows how easy it is to make one.
Logged

Civilize them with a Krag . . .
Pitspitr
Deputy Marshal
Top Active Citizen
*
Offline Offline

Posts: 3589


308 214-0082 45551 Rd 816, Sargent NE 68874 USA


WWW
« Reply #37 on: January 17, 2018, 11:31:49 am »

You can make the loading of BPCR rounds in any calibre as labour intensive as you want. Simple is better, especially if you like shooting more than reloading.

A pal of mine (who no longer shoots due to failing eyesight and other health issues) used to go the whole nine yards - weighing/sorting  bullets, weighing charges, checking cases for concentricity, wall thickness, indexing bullets and cases, etc., etc. Because I had the guns, he wanted to drag me along this route.

I told him that I'd quit shooting first. Paper patching? It is to laugh ..... It's enough of a PITA to make up paper cartridges for my '63's.

I cast good bullets, anneal, trim, put cases thru' my RCBS case prep machine, weigh charges 'lectronically, taper crimp. That's all, folks.
Your recipe (not your friend's) pretty much sounds like my recipe except that I add that I drill out the flash holes. I started doing that because Wolf recommended it in his book. Then after doing it to a couple of batches of brass, I found that W-W brass has VERY inconsistent flash hole size and that by drilling it out they are going to be more consistent. And I don't weigh BP. I throw them by volume and drop tube them. Other guys will produce more accurate loads, but I don't shoot well enough to need any more accuracy than what my loads produce.
Logged

I remain, Your Ob'd Servant,
Jerry M. "Pitspitr" Davenport
(Bvt.)Brigadier General Commanding,
Grand Army of the Frontier
BC/IT, Expert, Sharpshooter, Marksman, CC, SoM
NRA RSO, RVWA IIT2; SASS ROI, ROII;
NRA Endowment Life; AZSA Life; NCOWS Life
Drydock
MA1 USN ret. GAF #19, Colonel, Chief of Staff. BC, CC, SoM. SASS 1248 Life
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 2926



« Reply #38 on: January 17, 2018, 10:19:09 pm »

Hey PJ, he's got a .45-70!  Grin

But its pretty much the same.  My load is the same Lee 4.0cc dipper of OE 3f, leveled with an old credit card, under the Lee 405 HB, OAL of 2.55".  I use a Winchester WLR primer, Starline brass, and uniform the primer holes.  Lube in the lube grooves, with the base empty and clean.  Powder slowly poured into the case with a Drop Tube.  This gives light compression with the bullet.    Do not use wads with a hollow base bullet, they can cock in the hollow and cause flyers.  Plain base bullets can be used, but they must be a Black Powder design, with generous lube capacity.  Adjust powder as needed to ensure light compression. (defined as no more than the depth of one driving band on the bullet) or use a card wad to achieve same.

I cast these hot, preheating the mold on a hot plate.  I keep only the ones that are fully filled out, any round edges are thrown back in the pot, or set aside for plinking/armidillo loads.  Frosted appearance does not bother me.

28 grains 5744 under this bullet works well.
Logged

Civilize them with a Krag . . .
PJ Hardtack
American Plainsmen Society
Top Active Citizen
*
Offline Offline

Posts: 3326


« Reply #39 on: January 18, 2018, 12:36:26 pm »

28 grs of 5744 works well in the 45-70 as well with both 420 and 350 gr bullets.
Logged

"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne
Pages: 1 [2] Go Up Print 
Cas City Forum Hall & CAS-L  |  Special Interests - Groups & Societies  |  The Barracks (Moderators: Delmonico, Pitspitr)  |  Topic: Chiappa Sharps M1863/1868 50-70 carbine (now with pictures) « previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.058 seconds with 22 queries.