Today I found enough time to get the EHB 1876 Win. to the bench. The first load tested after 4 shots , I could tell the rifle did not shoot them very well. But they did serve as to get my sights on paper and foul my bore . The next load was the exact same as the first in case primer bullet and lube , the only difference was 1 one grain more Swiss powder. The load - .352 gr. cast from Win. bullet mould @ .458 as cast , with WW . Lube SPG , WLR primer , Jamisom case , 64.5 gr. by weight Swiss 2ff seated with Win, tong tool. Barrel was fouled by the first 5 shot load . Range was 100 yd. light cross wind 5/10 mph. sand bags using the rear tang . Single loaded the rifle each shot . Was only shooting for group and did waste any shots on windage . Here is the pic's of the first 3 shots then at 5 shots and then at 10 shots @100 yds' This rifle shot very easy did not have much recoil at all , and I have not done any bench shooting in months . Was happy with the results to say the least . Looks like this EHB will be a shooter ! ,,,,,,,DT