Author Topic: Brass for 56-46 for sale.  (Read 2030 times)

Offline injun john

  • Active citizen
  • *
  • Posts: 42
  • Liked:
  • Likes Given: 0
Brass for 56-46 for sale.
« on: April 30, 2017, 08:22:48 PM »
Hello to the camp!
I still have around 200 rnds of 56-46 Spencer brass that is of the later and much more common "improved" shape that due to it's shorter configuration from the earlier military trials 56-46 XL chamber configuration I cannot use.
The improved 56-46 can be used in many, if not most, of the Spencer sporting rifles or at the price I will be willing to let them go at you could cut them back a bit and form them for 56-56.
This lot is made from Starline 50-70 & 56-50 brass.
I'd take .75 cents each and the cost of priority shipping to CONUS.
 

Offline Jack Wagon

  • Top Active Citizen
  • *
  • Posts: 268
  • the High Sierra
  • Liked:
  • Likes Given: 0
Re: Brass for 56-46 for sale.
« Reply #1 on: June 11, 2017, 07:25:13 PM »
John, What is the length of the 56-46 cases made with the 50-70 brass. I need the 50-70 rim for positive extraction.  Thanks  Jw
Jack Wagon
Member NRA
Member #358 SSS

Offline injun john

  • Active citizen
  • *
  • Posts: 42
  • Liked:
  • Likes Given: 0
Re: Brass for 56-46 for sale.
« Reply #2 on: July 06, 2017, 08:22:20 AM »
My gun has the long military chamber.  I cut my first brass to Frank Barnes's Book.
You need to do a chamber cast and then you'll have the right length for your gun.
Otherwise you can end up with 200 brass that are too short to use like I did.
Anybody with a Standard 56-46 Spencer chamber need some brass?

Advertising

  • Guest
Re: Brass for 56-46 for sale.
« Reply #3 on: Today at 09:24:59 AM »

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com