Author Topic: grip options?  (Read 5961 times)

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
grip options?
« on: April 24, 2017, 11:07:43 AM »
just got an uberti 1873 .45 colt replica in stainless with the 5.5" barrel.

this is my first experience with a single action western style revolver.

the fit and finish of this gun is outstanding!

my only "complaint" is that the grip configuration is way too small.

I've got large hands and it's just not a good fit for me.

are there any fixes for this or do I just live with it or sell it?

thanks.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15831
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 416
Re: grip options?
« Reply #1 on: April 24, 2017, 11:18:24 AM »

Uberti 1860 Grips & frames , course they are hens teeth in Stainless , I suppose some nickel plated would do....

If you want to see an example , look up Pietta's Alchemista
when planets align...do the deal !

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: grip options?
« Reply #2 on: April 24, 2017, 12:02:03 PM »
It's been eons since Uberti manufactured a stainless 1860.  Hens Teeth is an understatement.  However .... Some lustrum ago, Uberti standardized a lot of their stuff.  I would suggest you contact VTI Gunparts for an 1860 "set" which will include fitted and finished wood.  Then you could either polish the steel bright or have it plated (Hard Chrome best bet).

Coffinmaker

Advertising

  • Guest
Re: grip options?
« Reply #3 on: Today at 08:49:18 AM »

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
Re: grip options?
« Reply #3 on: April 24, 2017, 01:01:17 PM »
I may not have been clear in my question.  ???

what i'm wondering is if there are any oversized wood grips / stocks available for the Cattleman.

the factory grips are just too narrow and short for my hands.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15831
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 416
Re: grip options?
« Reply #4 on: April 24, 2017, 04:21:36 PM »
Sorry perhaps your

"...are there any fixes for this ?... " threw us

We offered the 1860 route ...


Clearly, you may want something more like this  :-\      ugly as sin...but there it is  :)


http://www.ebay.com/itm/Jay-Scott-Colt-SAA-Frontier-326-Oversize-Walnut-Grips-New-Old-Stock-DB7-/222478857666?hash=item33ccc5f5c2
when planets align...do the deal !

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
Re: grip options?
« Reply #5 on: April 24, 2017, 04:49:05 PM »
the horror...the horror...

you're right, they be ugly.

I've been searching for oversize one piece wood grips without really finding the "right" one.

at any rate, i'm keeping this little beauty and will learn to like the factory grips.

thanks for your help gentlemen.

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4672
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1181
Re: grip options?
« Reply #6 on: April 24, 2017, 07:06:01 PM »
Some people with large hands find putting the little finger under the grip helps. 

Also, oversize grips will not be SASS legal though that may not bother you.  An 1860 gripframe and grip is legal.

If you just want the grip to be fatter, some aftermarket grips are fatter than others.  About 15 years ago I ordered some Altamont faux ivory grips for a 2nd gen Colt, and they were way too thick for my smaller hands, so I sold them.

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
Re: grip options?
« Reply #7 on: April 29, 2017, 12:22:49 PM »
a little research has shown me that the Pietta Alchimista II (.45 colt of course) may be the answer.

I get the part about the longer grip, but how about the thickness of the of the grips?

narrow profile or "meatier" than the Uberti Cattleman or colt repro?

any owners out there that can comment?

thanks.

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4672
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1181
Re: grip options?
« Reply #8 on: April 29, 2017, 12:53:36 PM »
The Army grip is usually just longer, not thicker, than the standard SAA grip.  But again, you could find thicker after market grips for the Army gripframe as well.

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
Re: grip options?
« Reply #9 on: April 29, 2017, 02:10:45 PM »
thanks Abilene.

i'm sure that the Alchimista grips will be a good fit.

I'll have to sell the Uberti to buy the Pietta... :'(

I know I'll take a big hit, but like they say live and learn, this was my first time out with six shooters.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15831
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 416
Re: grip options?
« Reply #10 on: April 29, 2017, 06:34:40 PM »
Which brings me back to the question  I suggested in the 2nd. post ?

Get an 1860 grip assembly from VTI for your Uberti , it will fit right up....

the Alchimista is a fine gun...but you have the  stainless Uberti just call VTI.  Part # UB:040011/Ass

another option.  check EBay  or advertise here and see if someone is willing to swap  or has a set...

when planets align...do the deal !

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
Re: grip options?
« Reply #11 on: April 29, 2017, 07:26:20 PM »
o.k.

the VTI website shows three versions of assemblies.

is the top one correct for my application?


Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15831
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 416
Re: grip options?
« Reply #12 on: April 29, 2017, 07:45:59 PM »
# 11 - UB:040011/Ass
UB:040011/AssDescription
Uberti Grip Assembly w/Steel BS & Brass TG (1860)
when planets align...do the deal !

Offline chaindrive

  • Active citizen
  • *
  • Posts: 26
  • Liked:
  • Likes Given: 0
Re: grip options?
« Reply #13 on: April 29, 2017, 08:04:05 PM »
thanks Major 2.

I think I will take this option.

need to check on hard chrome plating.

can anyone recommend a good shop that does this?

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com