Author Topic: New Colt SAA clone manufacturer  (Read 32511 times)

Offline Rooster Ron Wayne

  • Rooster
  • Top Active Citizen
  • *
  • Posts: 147
  • Lube your Balls & Cap your Nipples ~ Just Sayin !
  • SASS #: 86029
  • Liked:
  • Likes Given: 0
Re: New Colt SAA clone manufacturer
« Reply #20 on: June 04, 2017, 10:45:58 AM »
You never know .
Look at the USFA SAA Now sell for as much and even more then a Colt.
There is room in the game for a Nice American Made SAA.

I would love to have a nice pair of USFA's .
But I already have a Colt .
I would NEVER buy a CLONE for more money then a Original.
Just sayin
Rooster .
Only two defining forces have ever offered to die for you:
1. Jesus Christ
2. The American G. I.
One died for your soul, the other for your freedom."

Offline RRio

  • Arizona Six-Gun
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 2012
  • Six-Gun Specialist
  • SASS #: 22927
  • NCOWS #: 2492
  • GAF #: 267
  • Liked:
  • Likes Given: 469
Re: New Colt SAA clone manufacturer
« Reply #21 on: July 01, 2017, 06:57:29 PM »
I'll stay with my Ubertis for a third of the price, thank you very much.

 ;D
"I hate rude behavior in a man. I won't tolerate it"  - Capt. Woodrow Call

"Proud citizen of CasCity since 2004." 
NCOWS 2492  SASS 22927   SCORRS     USFACS #28       GAF #267 Dept. of the Platte  AZ        STORM #178

Offline LonesomePigeon

  • Top Active Citizen
  • *
  • Posts: 592
  • Liked:
  • Likes Given: 5
Re: New Colt SAA clone manufacturer
« Reply #22 on: July 23, 2017, 10:37:28 PM »
Hi. Checked the site again today. New pics are up. It's a different gun. Price has gone up too, now at $1,595. Looks very nice IMHO.
http://www.stdgun.com/saa-revolver/

Advertising

  • Guest
Re: New Colt SAA clone manufacturer
« Reply #23 on: Today at 11:36:34 AM »

Offline Abilene

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 4672
    • Abilene's CAS Pages
  • SASS #: 27489
  • NCOWS #: 3958
  • Liked:
  • Likes Given: 1180
Re: New Colt SAA clone manufacturer
« Reply #23 on: July 23, 2017, 11:42:55 PM »
That is one nice looking sixgun.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15832
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: New Colt SAA clone manufacturer
« Reply #24 on: July 24, 2017, 04:47:22 AM »
Welp.... I haven't seen one in the wild yet....anybody else ?

I gonna have see them trickling out into the shooters hands....

Grand Idea meets wishful thinking add in gullible consumer and a fool and his money and you get

 memory alone congers up.... Fletcher Bidwell , Bren 10 (and again)  , the Flat Rock Merwin Hubert debacle.

Add in some short lived STI .....

and you have the ingredients for bowl full of NOPE !  
 
when planets align...do the deal !

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: New Colt SAA clone manufacturer
« Reply #25 on: July 24, 2017, 11:21:52 AM »
Major 2,

At best, I've heard some rustling in the bushes and some faint movement of the under-growth.  I have not seen any live examples of the critter.  It's rumored Big Foot may have one on test.  It remains as illusive as the fabled Unicorn.

And at a market exchange ratio of 3 for one (Three GW II for ONE of those) I think smart money is on the Pietta.  The rumored "Standard" offering is on "maybe" offer for stupid money.

Coffinmaker

Offline LonesomePigeon

  • Top Active Citizen
  • *
  • Posts: 592
  • Liked:
  • Likes Given: 5
Re: New Colt SAA clone manufacturer
« Reply #26 on: July 24, 2017, 08:43:31 PM »
They said at SHOT Show they hope to have them available by November of 2017 so they aren't behind schedule yet. The gun that is on their website now is different than the one that was up a couple months ago. It seems to have a 3 digit serial number too.

Offline satchmo

  • Citizen
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: New Colt SAA clone manufacturer
« Reply #27 on: July 18, 2018, 06:49:28 PM »
I rec’d an email today from Standard Manufacturing announcing that their SAA reproductions are now available for immediate shipment.

Checked their website and it says the same thing.

Anybody seen one yet?

Has anyone posted or published a review?

$1895.00 + $40 shipping.

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15832
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: New Colt SAA clone manufacturer
« Reply #28 on: July 18, 2018, 06:59:05 PM »
Welp...you could be the first on your block...board , State ?   ;)




when planets align...do the deal !

Offline satchmo

  • Citizen
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: New Colt SAA clone manufacturer
« Reply #29 on: July 18, 2018, 08:15:06 PM »
Found a review from Guns and Ammo dated June, 2018.

http://www.gunsandammo.com/handguns/review-standard-manufacturing-sa-revolver-engraved/

 It contains a couple of discrepancies when compared to the Standard Mfg current website and today’s email announcement.

First one is the price.  G&A lists the engraved version at $2000 and the standard version at $1595, vs current lis price of $2450 for the engraved version and $1895 not engraved.

The other discrepancy that I saw is one of the photos clearly shows a modern type (concave) firing pin vs the website and announcement which states that the firing pin is cone type.  I hope this is the case.

Offline LonesomePigeon

  • Top Active Citizen
  • *
  • Posts: 592
  • Liked:
  • Likes Given: 5
Re: New Colt SAA clone manufacturer
« Reply #30 on: July 18, 2018, 11:25:22 PM »
I saved pictures of the gun Standard had on their website prior to today's announcement. The gun that was on their site before is different than the one on there now. Besides the cone firing pin it looks like they have changed the front site, the new front site has a better profile in my opinion.

Offline Galloway

  • Top Active Citizen
  • *
  • Posts: 518
  • Liked:
  • Likes Given: 0
Re: New Colt SAA clone manufacturer
« Reply #31 on: July 19, 2018, 01:02:30 PM »
Good for them! Thats farther than most of these rumors make it. If they can land a contract with lipseys or bass pro id say we have something.

Offline Professor Marvel

  • purveyor of useless items to the gentry
  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 3081
  • learn from the past, or be doomed to repeat it
  • Liked:
  • Likes Given: 1118
Re: New Colt SAA clone manufacturer
« Reply #32 on: July 19, 2018, 03:03:58 PM »
Ah My Dear Netizens -

another vendor has (finally) entered the fray with more than announcements,  smoke, mirrors, cgi photoshopped images, and one or two prototypes.

plusses:
 - Welllllll, at least they finally came out with it.
- it showed up not too far off from the announced timeframe
- the pictures look verrrrry pretty
-  gunrag reviews are beyond glowing (what else?)
- photos on THEIR webpage show screwslots all aligned- aka "timed" or "clocked" screws  ( love to see that happen in production)

minusses:
- photos on THEIR webpage seem show poor grip-to-metal fit
- price increases from ~ $1500 (announced) to $1900 plus shipping, plus, plus plus....,
- none are even in the wild yet, nobody has seen any on the shelves anywhere
- they do not appear to be "for sale" , they appear to be "taking orders"
         Call me grumpy, but When they show up on Bud's or the LGS, then I'll believe it.

--- "As a special introductory and limited time offer, we are providing a lifetime warranty on these Single Action Revolvers"

oh, that smacks of Marketeer BS and Ronco Talk!
 "Step Right Up, buy it now and we'll throw in absolutely free- for a limited time"
 either you provide a decent warranty , now and forever, or you don't.

last, I was just at the LGS and was drooling over the cavalry length laser engraved Italians for less than $700 out the door....
that buys me TWO pistolas and still have over $500 to spend on , oh I don't know,  food?
or one pistol and replace the furnace?

(Or I can skip the engraving and have any caliber and barrel length , cased & blued for under $400 each .... just saying...)

Oddly, I really don't feel deprived "just because" I'm shooting my Italian CapGuns or 1873's .

yhs
prof marvel
Your Humble Servant
~~~~~Professor Algernon Horatio Ubiquitous Marvel The First~~~~~~
President, CEO, Chairman,  and Chief Bottle Washer of


Professor Marvel's
Traveling Apothecary
and
Fortune Telling Emporium


Acclaimed By The Crowned Heads of Europe
Purveyor of Patent Remedies, Snake Oil, Powder, Percussion Caps, Cleaning Supplies, Dry Goods,
and
Picture Postcards

Offering Unwanted Advice for All Occasions
and
Providing Useless Items to the Gentry
Since 1822
[
Available by Appointment for Lectures on Any Topic


Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15832
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: New Colt SAA clone manufacturer
« Reply #33 on: July 19, 2018, 06:49:31 PM »
Nail squarely hit on the head , Professor ....


I'm of the opinion " 'Fool me once, shame on you, (the Fletcher Bidwell Spencer  & the great Merwin Hurbert scam )

fool me twice, shame on me'




when planets align...do the deal !

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: New Colt SAA clone manufacturer
« Reply #34 on: July 19, 2018, 10:15:52 PM »

I really don't want to get into a really long wordy dissertation (yes I do) as the Perfesser and Majr 2 have already said everything I could and the Perfesser were much more eloquent that I (for the most part).  I do however, have a couple of CAVEAT(s).

There is no indication of improvement to Coil Spring and Plunger for the hand.

The conical firing pin is of no benefit over a concave taper firing pin.

There is no indication of improvement with a Hard Bushing in the recoil shield.

There is no indication of an improvement in the Main Spring (Coil ??)

They (Mfgr) claim precision.  OK, Show Me.

It would appear the new kids on the block have actually found a more expensive way to make an SA than Donnally did.  Amazing.

No way they are going to amortize their stat up costs.  Underwhelmed am I.  Also opinionated !!

Oh, almost forgot.  If your inclined to write a check for one of these, I suggest you write the check to ME.  That way one of us will be happy   ::)

Offline Major 2

  • "Still running against the wind"
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 15832
  • NCOWS #: 3032
  • GAF #: 785
  • Liked:
  • Likes Given: 415
Re: New Colt SAA clone manufacturer
« Reply #35 on: July 19, 2018, 10:49:14 PM »
I'll split it with you.... then 2 out of three are happy ...and 2 out 3 ain't bad !

when planets align...do the deal !

Offline Cliff Fendley

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 3697
  • Liked:
  • Likes Given: 360
Re: New Colt SAA clone manufacturer
« Reply #36 on: August 06, 2018, 02:19:52 PM »
Still looking at three times what I just paid for the last Cimarron that has the Bone and Charcoal CC, upgraded wood grips, my custom serial number.

Sure someone can say they have things like hardened bushing in the frame, the barrel and cylinder may or may not be better quality of steel but the point I would make is I have some of the Cimarron/Ubertis with many thousands of rounds through them and these things or lack of are not a problem so I'll never wear out three to make up the price of these supposedly superior revolvers.

What I can't understand is with todays CNC technology making the parts and even considering a quality difference in steel and some special hand fitting why these US manufactures think they can justify charging those prices.

I am a knifemaker and buy some of the highest end most expensive USA made blade steels available and based on weight the entire amount of the best quality carbon steel required to make a SAA is less than 100 bucks.

I know some do but I don't and never will consider USFA, recent production Colt, or any other modern manufactured SAA to be collectable for investment purposes. They are a tool and just as collectable as any other modern day firearms but nothing that can be considered a real investment in our lifetimes. Especially when they are already asking those prices as new.
http://www.fendleyknives.com/

NCOWS 3345  RATS 576 NRA Life member

Johnson County Rangers

Offline Cliff Fendley

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 3697
  • Liked:
  • Likes Given: 360
Re: New Colt SAA clone manufacturer
« Reply #37 on: August 06, 2018, 02:27:56 PM »
So just out of curiosity I just check supplier and a block of 4140 large enough to mill out about two frames and grips and a bar large enough to make two 5 1/2 inch barrels winds up costing around 36 dollars so they are spending about 18 dollars on the steel itself. Yet people will claim steel quality between Uberti and them, being Colt or whoever, is one of the reasons why they cost so much.

Using CNC machining on most parts cost no more in the US than it does for Uberti in Italy. Add in a couple steps and some hand fitting and action work along with real CCH there is no reason why they should cost more than three or four hundred more than a standard Uberti. Anything over that is markup gambling on what the market will bear. Colt could sell a high quality SAA for half of what they do and sell a large amount of them. I haven't understood Colts financial situation and why they are too lazy and greedy to make and sell one of their most iconic firearms while the italians are shipping them over here by the shiploads.
http://www.fendleyknives.com/

NCOWS 3345  RATS 576 NRA Life member

Johnson County Rangers

Offline Coffinmaker

  • Top Active Citizen
  • *
  • Posts: 7605
  • Liked:
  • Likes Given: 125
Re: New Colt SAA clone manufacturer
« Reply #38 on: August 07, 2018, 09:10:13 AM »

Well Sir Cliff,

Were you expecting an argument, you'll be some disappointed.  Not gonna Happen.  I refused for years to buy a "High End" SA for the reasons you mention plus a couple of gripes of my own.  I don't want to start down the Colt trail as I have had heartburn with Colt forever.  And .... Colt has gone Dodo.  Will not be missed.

But, just highlight what Cliff has said, just take a hard look at the Pietta built Great Western II.  Made with CNC machining with a commonality of parts some others can only dream about.  Spending the bucks for an unimproved Replicant of a 145 year old design and charging an Arm and Leg for it .... is just a RIP OFF!!

Offline Dave T

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1058
  • Liked:
  • Likes Given: 901
Re: New Colt SAA clone manufacturer
« Reply #39 on: August 07, 2018, 10:20:35 AM »
Couldn't disagree with you guys more...but I ain't gonna fight about it.

You do what you want and I'll do the same. And no, I'm not buying a Standard Manufacturing gun - yet. If they bring out a blackpowder frame model I'll probably be the first in line. (smile)

Dave

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com