New firing pin & retractor ,,coming from Winchester Bob,,But ,I went ahead and made a new one ,,used the "DF" (DREMEL& FILE) method,,i made mine a bit thicker and slightly wider at the tip that fit's into the firing pin bevel.,,,now the firing pin don't rotate ,( the old one twisted back & forth ,,a lot),,filled the looong cut on the hammer end of the firing pin( about 3/16") then slowly dressed it till the hammer cocked full .Put her together,,,throwed 3 rds. in the mag. ,,bean can @ about 25-30 ft. ,,bang,,,bang,,,bang,, ( only 2 hits ) ,,,I'm STROKED!!!!.
Hootmix.