Author Topic: Hand Stitching Leather  (Read 91386 times)

Offline Dutchman Dick

  • Active citizen
  • *
  • Posts: 30
  • Liked:
  • Likes Given: 0
Re: How many use a hand stictch
« Reply #40 on: December 02, 2008, 05:40:22 AM »
I hand-stitch with one needle, usually - through all the holes once, then back again to where I started. I use a small-tined, 4-prong chisel to punch the holes on long, straight seams and a single-prong chisel on sharper curves and corners. I normally use a groover so my stitches are flush with the surface of the leather.

Offline JD Alan

  • Pistol Packin Parson
  • Top Active Citizen
  • *
  • Posts: 2710
    • New Life Church Website
  • Liked:
  • Likes Given: 0
Re: How many use a hand stictch
« Reply #41 on: December 02, 2008, 08:45:28 AM »
PM sent
The man with an experience is never at the mercy of a man with an argument.

Offline cowboy316

  • Top Active Citizen
  • *
  • Posts: 1001
    • http://wildwestcustom-leatherworks.webs.com/
  • Liked:
  • Likes Given: 0
hand stitching thread
« Reply #42 on: February 01, 2009, 02:41:42 AM »
ok guys i was just lookin threw my tandy catalog and am lookin  at thread what is the best for hand stitching????

Advertising

  • Guest
Re: Hand Stitching Leather
« Reply #43 on: Today at 08:21:15 AM »

Offline cowboywc

  • Top Active Citizen
  • *
  • Posts: 1804
    • Leather by WC
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #43 on: February 01, 2009, 03:11:47 AM »
Howdy
I use the wax cotton / linnen on all my light work. For heavy stuff I use Weavers nylon.
WC
Leather by WC / Standing Bear's Trading Post

Offline ChuckBurrows

  • Frontier Knifemaker & Leathersmith
  • Top Active Citizen
  • *
  • Posts: 1066
    • Wild Rose Trading Company
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #44 on: February 01, 2009, 04:05:40 AM »
IMO forget Tandy......
Linen Thread - 5 cord left or right hand twist is a good all purpose thread:
Campbell- Bosworth: http://campbell-bosworth.com/catalog/advanced_search_result.php?keywords=linen - I have not used the less expensive Hungarian thread myself but reports that I have received from others who have state that it just fine and costs half as much as the Barbour's.
aka Nolan Sackett
Frontier Knifemaker & Leathersmith

Offline cowboy316

  • Top Active Citizen
  • *
  • Posts: 1001
    • http://wildwestcustom-leatherworks.webs.com/
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #45 on: February 01, 2009, 07:59:30 AM »
Thank you  Chuck and WC you guys have been way helpfull and im loving the work you guys do it inspires me to get trying different things even tho i dont know what im doing LOL
             Cowboy316

Offline JD Alan

  • Pistol Packin Parson
  • Top Active Citizen
  • *
  • Posts: 2710
    • New Life Church Website
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #46 on: February 01, 2009, 09:34:33 AM »
Thanks for that info Chuck. Can you address the right-left twist issue, and why you would prefer one over the other? (Or someone else who might know)

Hey WC, what would you conisder light verses heavy in leatherwork?

Thanks to both of you busy pros, JD.
The man with an experience is never at the mercy of a man with an argument.

Offline Marshal Will Wingam

  • Garden Variety
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 9228
  • Smile. It makes people wonder what you're up to.
  • Liked:
  • Likes Given: 307
Re: hand stitching thread
« Reply #47 on: February 01, 2009, 12:24:04 PM »
Thanks for the link, Chuck. I ordered some of the Hungarian thread to see what it's like. I'll report back when I get it.

SCORRS     SASS     BHR     STORM #446

Offline cowboywc

  • Top Active Citizen
  • *
  • Posts: 1804
    • Leather by WC
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #48 on: February 01, 2009, 03:58:27 PM »


Hey WC, what would you conisder light verses heavy in leatherwork?

Thanks to both of you busy pros, JD.
[/quote]

Howdy
Wallets, checkbooks, notebooks, etc all get light thread. Holsters, sheaths, saddles and tack get the heavy.
WC
Leather by WC / Standing Bear's Trading Post

Offline ChuckBurrows

  • Frontier Knifemaker & Leathersmith
  • Top Active Citizen
  • *
  • Posts: 1066
    • Wild Rose Trading Company
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #49 on: February 01, 2009, 04:24:02 PM »
JD - left hand and right hand are only appliable if the thread is bing used in a machine, for hand sewing either one. FWIW - I use 5 cord for my holsters and 3 cord for sewing the lining on belts, etc.

Will - I look forward to your opinion as I'm starting to get low on thread......
aka Nolan Sackett
Frontier Knifemaker & Leathersmith

Offline JD Alan

  • Pistol Packin Parson
  • Top Active Citizen
  • *
  • Posts: 2710
    • New Life Church Website
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #50 on: February 01, 2009, 05:38:29 PM »
Chuck, WC, thanks to both of you!
The man with an experience is never at the mercy of a man with an argument.

Offline Marshal Will Wingam

  • Garden Variety
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 9228
  • Smile. It makes people wonder what you're up to.
  • Liked:
  • Likes Given: 307
Re: hand stitching thread
« Reply #51 on: February 01, 2009, 05:53:00 PM »
I'm starting to get low on thread......
Exactly why I ordered some. Your post was very timely. I was wondering where to get some good thread since I'm down to just a few projects on the spool I have.

SCORRS     SASS     BHR     STORM #446

Offline santee

  • Keeping the Spirit of the Old West Alive
  • Top Active Citizen
  • *
  • Posts: 1498
  • The business end of a sixgun earns no interest.
    • Arizona Ghostriders
  • SASS #: 2171
  • Liked:
  • Likes Given: 22
Re: hand stitching thread
« Reply #52 on: February 02, 2009, 07:47:16 AM »
Anyone use an awl manufactured by other than Osborne or Tandy?
Historian at Old Tucson Studios
SASS #2171
STORM #371
RATS #431
True West Maniac #1261

Offline Marshal Will Wingam

  • Garden Variety
  • Deputy Marshal
  • Top Active Citizen
  • *
  • Posts: 9228
  • Smile. It makes people wonder what you're up to.
  • Liked:
  • Likes Given: 307
Re: hand stitching thread
« Reply #53 on: February 02, 2009, 10:53:38 AM »
I use a Vergez Blanchard in addition to the Osborn and Tandy ones I have.

SCORRS     SASS     BHR     STORM #446

Offline cowboywc

  • Top Active Citizen
  • *
  • Posts: 1804
    • Leather by WC
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #54 on: February 02, 2009, 12:21:49 PM »
Howdy
I use an Osborne blade but I put it into an old Speedy Stitcher Haft. It is bigger and fits my hand better.
WC
Leather by WC / Standing Bear's Trading Post

Offline santee

  • Keeping the Spirit of the Old West Alive
  • Top Active Citizen
  • *
  • Posts: 1498
  • The business end of a sixgun earns no interest.
    • Arizona Ghostriders
  • SASS #: 2171
  • Liked:
  • Likes Given: 22
Re: hand stitching thread
« Reply #55 on: February 02, 2009, 02:42:31 PM »
Okay, 'cause when the Osborne fixed blade snaps on you, you basically have to pitch the whole mess. Like the replacement blade idea.
Historian at Old Tucson Studios
SASS #2171
STORM #371
RATS #431
True West Maniac #1261

Offline Flinch Morningwood

  • Top Active Citizen
  • *
  • Posts: 346
  • Liked:
  • Likes Given: 1
Re: hand stitching thread
« Reply #56 on: February 02, 2009, 02:52:50 PM »
Don't forget to run the thread thru some wax before you use it.   I actually use the wax/pine pitch mixture that Chuck suggested on a thread some time ago. 

Mixing it was an adventure but it works like a champ and keeps the threads locked and looking great...this is a quote from a post of his that describes the method.

For "waxing" I use a variation of the shoemakers "hand" wax - a mix of beeswax and rosin - I melt the two together in a 60/40 ratio of wax to rosin - to melt use an old crockpot or other flame less source for safety sake. Once combined I pour off, into used yogurt containers (about a 1/3 full) and let cool - once cool cut away the container and you have a perfectly sized "ball" to work with. Other makers I know who use a similar mix, pour it into a pot of cold water and work it into a ball as it cools. The rosin I use is "Brewers Pitch" from James Townsend and Sons http://www.jastown.com/bulk/bp-293.htm
The rosin not only makes the wax stickier so that the stitches lock tighter, but it along with the wax, add anti-bacterial/fungal benefits.


I poured it in cupcake tin with aluminium cupcake liners...I had to put them in hot water to seperate the "lumps" from the liners but now I have 12 balls that should last me years...
"I'll kill a man in a fair fight. Or if I think he's gonna start a fair fight."

- Jayne Cobb

Offline cowboywc

  • Top Active Citizen
  • *
  • Posts: 1804
    • Leather by WC
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #57 on: February 02, 2009, 06:58:42 PM »
I poured it in cupcake tin with aluminium cupcake liners...I had to put them in hot water to seperate the "lumps" from the liners but now I have 12 balls that should last me years...
[/quote]

Howdy
To save money on the liners. Just pour into the cupcake tin and put the whole thing in the freezer.
When they are hard they will just fall out of the tin.
WC
Leather by WC / Standing Bear's Trading Post

Offline santee

  • Keeping the Spirit of the Old West Alive
  • Top Active Citizen
  • *
  • Posts: 1498
  • The business end of a sixgun earns no interest.
    • Arizona Ghostriders
  • SASS #: 2171
  • Liked:
  • Likes Given: 22
Re: hand stitching thread
« Reply #58 on: February 03, 2009, 05:04:11 AM »
That's good info. Thanks.
Historian at Old Tucson Studios
SASS #2171
STORM #371
RATS #431
True West Maniac #1261

Offline Trailrider

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2366
    • Gunfighter Zone
  • Liked:
  • Likes Given: 0
Re: hand stitching thread
« Reply #59 on: February 03, 2009, 04:31:53 PM »
Howdy, Pards,
I use Stewart's No. 150 Waxed Polyester thread (Coarse) for hand stitching (with a Speedy Stitcher*) the main seams of holsters and for sewing on buckle and tongue billets, etc. on belts.  For other things, such as cartridge loops on belts I use #207 Nylon thread on my Juki TSC 441 machine (basic machine Ferdco Super Bull), and #277 Nylon thread for sewing on holster belt loops, etc.  This stuff is unwaxed, but I run the thread wound on the bobbins through a cold wax bath as it is being wound on the bobbin.

*Note: For lighter stuff, I might use Stewart's #170 Fine Waxed Polyester thread in the Speedy Stitcher.  With the #150, I use a Landis machine hook needle (the eye in the point has the one side open), in a Speedy Stitcher handle.  With the Landis hook, I pre-drill the holes or punch them on the Juki with a needle and no thread, then push the hook through the holes, grab a loop, pull it back through the holes and push the other end of the thread through the loop thus formed.  You could also do "double needle" stitching with the hook...if you are careful not to catch the first thread through the hole.
Ride to the sound of the guns, but watch out for bushwhackers! Godspeed to all in harm's way in the defense of Freedom! God Bless America!

Your obedient servant,
Trailrider,
Bvt. Lt. Col. Commanding,
Southern District
Dept. of the Platte, GAF

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com