Hi, new to the forum. I have an Interarms Stainless Rossi in .357 that I've had for six years now, and I have done the steve gunz action job and have also have put in a new ejector spring. I did all these modifications when I first got the gun. The other day I was polishing the steel and when I went to cycle the bolt it got stuck about 1/4 through its travel. It was easy to close, so I thought maybe some polish got inside and gummed up the action. I took the gun apart and cleaned it out, but the problem was still there, probably every 15 cycles. I then thought maybe it was the lever/bolt pin hanging out too much or something, it wasn't. After I checked the pin and put it back together the hammer now sticks, like its binding against something between the first and second positions. I now think this is the main problem. Has this happened to anyone before? Any help would be much appreciated, I want to go shoot some more!