Author Topic: got another pietta 1858  (Read 4036 times)

Offline pghrich

  • Citizen
  • *
  • Posts: 17
  • Liked:
  • Likes Given: 0
got another pietta 1858
« on: August 10, 2012, 01:29:49 PM »
Hello all, well actually i really bought a pietta 1851 brass in 44caliber right after i got my 1858 steel, it has without a dought the nicest trigger ever from the factory, but now i have a pietta 1858 buffalo brass coming [hopefully today], i currently load my steel  1858 with 25grains of 3f and a 357mag case full of cornmeal topped off with a .454 ball, hopefully this isnt to much for the buffalo, thanks for reading pghrich

Offline Wolfgang

  • Top Active Citizen
  • *
  • Posts: 1343
    • The Desperate Hot Springs News
  • Liked:
  • Likes Given: 0
Re: got another pietta 1858
« Reply #1 on: August 11, 2012, 06:00:05 AM »
I made my own "Buffalo" . . . got a barrel from VTI and put it on a brass framed '58 that I had . . . .

http://www.drburkholter.com/cf19.html . . .

. . . . . still have not got around to doing the partitions in the case, . .  :-[   Just too many projects going on . . . . .  :)   but that is a good thing . . . .  ;)
Beware the man with one gun, he probably knows how to use it.

Offline pghrich

  • Citizen
  • *
  • Posts: 17
  • Liked:
  • Likes Given: 0
Re: got another pietta 1858
« Reply #2 on: August 11, 2012, 07:24:45 AM »
Good morning all, well i completely disassembled my new buffalo, it was really rough around the edges and the trigger pull was about 6lbs or so, my polished everything up with a dremmel and some tooth paste [thats all i had on hand], put it back together and then the cylinder would spin in either direction?? So i compared it to my old steel one and discovered that the hand was not sticking out enough, i took it apart again and bent it a little now its fine and the trigger it a crisp 4lbs, pghrich

Advertising

  • Guest
Re: got another pietta 1858
« Reply #3 on: Today at 06:59:55 AM »

Offline Mogorilla

  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 1866
  • NCOWS #: 3306
  • GAF #: 883
  • Liked:
  • Likes Given: 95
Re: got another pietta 1858
« Reply #3 on: August 14, 2012, 08:53:28 AM »
Hey pghrich,
I use 25 gr of FFF BP or 777 in my Brass Buffalo, usually just a felt wad over that then a 454 ball.  Fires like a dream.  have about 1000 rds through this one.   About 500 rds ago, I took my shoulder stock from my 1860 colt and opend it up a bit.  Bought a hammer screw from Taylors that is made for 58s to have a shoulder stock.  Haven't taken it off since.  This thing is a tack driver and matches my Henry Rifle in 44-40 in accuracy  (me shooting though)   I have a 2nd cylinder for it and it is a sweet little shooter


Offline pghrich

  • Citizen
  • *
  • Posts: 17
  • Liked:
  • Likes Given: 0
Re: got another pietta 1858
« Reply #4 on: August 14, 2012, 05:22:52 PM »
Hello all, i took mine out shooting today using the said above load 25g 3f goex 38special case of corn meal and now a .454 ball , it shoots better than many of my cartridge guns, 4inch group offhand at 25 meters well centered about 5 inches high, love it, pghrich

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com