Author Topic: 44 special  (Read 3005 times)

Offline wyattm

  • Active citizen
  • *
  • Posts: 49
  • Liked:
  • Likes Given: 0
44 special
« on: April 15, 2012, 11:28:19 PM »
Need a good mild load with soft lead bullets where the powder is not position sensitive for a colt SAA 44 special built on a 1st generation BP frame.
Thanks,
wyattm

Offline Trailrider

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2370
    • Gunfighter Zone
  • Liked:
  • Likes Given: 0
Re: 44 special
« Reply #1 on: April 15, 2012, 11:46:41 PM »
Is the barrel modern steel? The cylinder? Is the timing very good?  Check with the milder loads shown in the Lyman or Hodgdon's loading manuals.  Trail Boss is intended to bulk up, but I would go a little above the MINIMUM load shown, and go with 200 grain bullets. Crimp the brass mouth firmly into a crimp groove on the bullet.
Ride to the sound of the guns, but watch out for bushwhackers! Godspeed to all in harm's way in the defense of Freedom! God Bless America!

Your obedient servant,
Trailrider,
Bvt. Lt. Col. Commanding,
Southern District
Dept. of the Platte, GAF

Offline Lefty Dude

  • Top Active Citizen
  • *
  • Posts: 714
  • Liked:
  • Likes Given: 0
Re: 44 special
« Reply #2 on: April 16, 2012, 12:20:48 AM »
16 grains of 3F goex, grits filler to the base of a 200 gr. RNFP. ;)

Advertising

  • Guest
Re: 44 special
« Reply #3 on: Today at 07:43:12 PM »

Offline PJ Hardtack

  • American Plainsmen Society
  • Top Active Citizen
  • *
  • Posts: 4003
  • Liked:
  • Likes Given: 0
Re: 44 special
« Reply #3 on: April 16, 2012, 06:37:12 PM »
Use a load recommended for the shorter .44 cases.
"I won't be wronged, I won't be insulted, I won't be laid a hand on.
I don't do these things to others and I require the same from them."  John Wayne

Offline Sir Charles deMouton-Black

  • THE ANCIENT SUBSTANCE ENDURES - ALL LESSER PROPELLANTS SHALL FIZZLE
  • NCOWS Member
  • Top Active Citizen
  • ***
  • Posts: 6201
  • Liked:
  • Likes Given: 405
Re: 44 special
« Reply #4 on: April 16, 2012, 10:48:39 PM »
I went to Hodgdon's site and cutnpasted this;

200 GR. CAST LRNFP  Hodgdon  Titegroup  .430"  1.450"  4.5  846  8,600 CUP  5.4  973  13,100 CUP 

Titegroup is supposed to be position INsensitive and they offer 4.5 to 5.4 grains as a load suggestion for 200 gr cast bullets.
NCOWS #1154, SCORRS, STORM, BROW, 1860 Henry, Dirty Rat 502, CHINOOK COUNTRY
THE SUBLYME & HOLY ORDER OF THE SOOT (SHOTS)
Those who are no longer ignorant of History may relive it,
without the Blood, Sweat, and Tears.
With apologies to George Santayana & W. S. Churchill

"As Mark Twain once put it, “History doesn’t repeat itself, but it does rhyme.”

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com