Lee shotshell reloader and black powder ?

[Marshal Deadwood]

Can you use the Lee shotshell reloader to load black powder shotgun rounds ?

Deadwood

[Delmonico]

No reason why not, you'd have to dump the powder some other way since none of the bushings would even be close enough.

[Marshal Deadwood]

Thanks, Delmonico.  I just wasnt sure if the Lee equipment was such as could be used with bp. Charging separately wouldn't be that big of an issue.

[Advertising]

[Grapeshot]

Can you use the Lee shotshell reloader to load black powder shotgun rounds ?

Deadwood

If you are talking about the Lee Load All Shot Shell Loading Press the answer is Yes.  I used one for 15 years before I got My MEC 600 Jr.  It was great for sizing and decapping as well as repriming.  I used mine to seat fiber wads, shot and then crimped my plastic hulls.  Never had a problem with chambering.  I used a Lee 4.0 dipper and a funnel to pour my BP charges into the primed hulls before seating wads etc.

[pony express]

Same as Grapeshot, I use mine for al operations except the powder charging. Since it's not progressive, charging cases seperately is no problem. I think the instructions say not to use fiber wads in it, but I have no idea why, it words fine for me with them.

[Delmonico]

I think the instructions say not to use fiber wads in it, but I have no idea why, it words fine for me with them.

With fiber wads and some of the older smokeless powders you had to put a very heavy wads pressure on the (up to 100 pounds) to get a clean burn.  The press is not capable of that kind of pressure.  Red Dot and fiber wads used to have a reputation for bloopers with worn cases or not enough pressure, Green Dot is said to have been created to over come this problem. 

Herco is another one that required a heavy wad pressure and I'm sure there are others.  I've got some of this information in old books I haven't unpacked yet.

No worries with black though.