Author Topic: 44 WCF Smokeless Loads  (Read 37058 times)

Offline Trailrider

  • CAS-L Ghost Rider
  • Top Active Citizen
  • *
  • Posts: 2370
    • Gunfighter Zone
  • Liked:
  • Likes Given: 0
Re: 44 WCF Smokeless Loads
« Reply #40 on: May 11, 2013, 11:01:52 PM »
[Warning: I bear NO responsibility for the use of the following information in guns other than my own, and maybe not then! Usual disclaimer.]

For the past 25 years or so, my standard load in .44-40 has been 8.0 grains of Hodgdon's UNIVERSAL behind a commercially cast 213 gr RNFP bullet, sized .430". I shot over 3,000 in a Navy Arms M1860 Henry repeating rifle, checking the headspace periodically. MV = 1280 ft/sec from the 24" barrel. I use nothing but Winchester brass and LP primers. I noted NO stretching of the action nor setbacik to that point. My pistols have been Ruger OM Vaqueros, so I can't say I would recommend this hot of a load in Colt-style guns. MV from the tight-throated (.425" throats, .430" bullet  :o ) Rugers runs around 950 ft/sec from a 7-1/2" barrel. Load is DEFINITELY NOT for BP Colt's!  Just sayin... 
Ride to the sound of the guns, but watch out for bushwhackers! Godspeed to all in harm's way in the defense of Freedom! God Bless America!

Your obedient servant,
Trailrider,
Bvt. Lt. Col. Commanding,
Southern District
Dept. of the Platte, GAF

 

SMF spam blocked by CleanTalk

© 1995 - 2023 CAScity.com