Jamison .50-95 brass!

[ndnchf]

Tweet

I just received 2 sample .50-95 cases from Jamison.  I haven't done anything with them yet, but they look very nice and have the correct headstamp.  Been waiting for about 9 months, glad to see they are finally getting them into production

[mtmarfield]

   Greetings!

   Excellent news! I had picked up a 20 pc. box of Bertram, but had done so primarily for back-up; I've got about forty pieces of .348WCF awaiting the opportunity to be fire-formed! While I have faith that the .348WCF will work just fine (It did for the .45-75WCF), I would also like to order a couple boxes of Jamison brass for those times when I think that I need quality factory brass!
   Are you getting your brass direct, or through Buffalo Arms?

   Be Well!

                  M.T.Marfield

[ndnchf]

I've been using Ten-X 50-95 brass this past year, I bought it directly from them.  I haven't bought any of the Jamison brass yet, I just have the samples.  But I'm sure Buffalo Arms will be carrying it, but you can buy directly from Jamison also. 

[sharps4065]

I need some more 50/95 brass and Dave Gullo's postage/export rules overseas makes that very expensive. Noticed that some of you guys use Jamison brass so I tried emailing them but delivery fails. Do any of you know if the company is having probelms, or just that they have a poor ISP?

Hold centre
Clive

[jinglebob]

I bought mine from Buffalo Arms a couple months ago.  It is all i have ever used for the 50-95.  It is pretty nice, although like most lots of new brass, it needed the flash holes deburred and trimmed to length as each piece varied a couple thousandths.  It is very thin-walled and I suspect this could be a trait of 50-95 but am not sure as i have never seen Bertram or any other brand before. 

[ndnchf]

I need some more 50/95 brass and Dave Gullo's postage/export rules overseas makes that very expensive. Noticed that some of you guys use Jamison brass so I tried emailing them but delivery fails. Do any of you know if the company is having probelms, or just that they have a poor ISP?

Hold centre
Clive

I'm pretty sure Jamison is doing fine, they're just not real web/internet savvy.  Probably best to call them.  i don't have their number handy, but do a search of the forum, it's been posted before.   

[concho]

well this Jamison web for 50/95 brass Please give more info Like a state or even something like are they on this planet ??

[ndnchf]

Ok, I did the search for you:

Here's their address:

Jamison International LLC
3551 Mayer Ave
Sturgis, SD 57785

phone: (605) 347-5090

[concho]

Thank you very much